remove unused translations

interface/src/i18n/cs/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const cs: Translation = {
   LANGUAGE: 'Jazyk',
   RETRY: 'Zkusit znovu',
-  LOADING: 'Načítání',
   IS_REQUIRED: '{0} je vyžadováno',
   SIGN_IN: 'Přihlásit se',
   SIGN_OUT: 'Odhlásit se',
@@ -50,8 +49,6 @@ const cs: Translation = {
   SETTINGS: 'Nastavení',
   UPDATED_OF: '{0} Aktualizováno',
   UPDATE_OF: '{0} Aktualizace',
-  REMOVED_OF: '{0} Odebráno',
-  DELETION_OF: '{0} Smazání',
   OFFSET: 'Offset',
   FACTOR: 'Faktor',
   FREQ: 'Frekvence',
@@ -64,17 +61,14 @@ const cs: Translation = {
   TEMP_SENSORS: 'Teplotní senzory',
   WRITE_CMD_SENT: 'Zapisovací příkaz odeslán',
   EMS_BUS_WARNING: 'EMS sběrnice je odpojena. Pokud toto varování přetrvává i po několika sekundách, zkontrolujte nastavení a profil desky',
-  EMS_BUS_SCANNING: 'Prohledávání zařízení na EMS sběrnici...',
   CONNECTED: 'Připojeno',
   TX_ISSUES: 'Problémy s Tx - zkontrolujte režim Tx',
   DISCONNECTED: 'Odpojeno',
-  EMS_SCAN: 'Opravdu chcete zahájit úplné skenování zařízení na EMS sběrnici?',
   DATA_TRAFFIC: 'Datový provoz',
   EMS_DEVICE: 'EMS zařízení',
   SUCCESS: 'ÚSPĚCH',
   FAIL: 'SELHÁNÍ',
   QUALITY: 'KVALITA',
-  SCAN: 'Skenovat',
   STATUS_NAMES: [
     'Přijaté EMS telegramy (Rx)',
     'Čtení EMS (Tx)',
@@ -125,7 +119,6 @@ const cs: Translation = {
   ENUM_FORMAT: 'Formát enum v API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Povolit 1-Wire parazitní napájení',
-  LOGGING: 'Protokolování',
   LOG_HEX: 'Protokolovat EMS telegramy v hexadecimálním formátu',
   ENABLE_SYSLOG: 'Povolit Syslog',
   LOG_LEVEL: 'Úroveň protokolování',
@@ -170,7 +163,6 @@ const cs: Translation = {
   CLOSE: 'Zavřít',
   USE: 'Použít',
   FACTORY_RESET: 'Obnovení továrního nastavení',
-  SYSTEM_FACTORY_TEXT: 'Zařízení bylo obnoveno do továrního nastavení a nyní se restartuje',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Opravdu chcete resetovat zařízení EMS-ESP do továrního nastavení?',
   AVAILABLE_VERSION: 'Nejnovější dostupné verze',
   STABLE: 'Stabilní',
@@ -255,9 +247,7 @@ const cs: Translation = {
   NETWORK_SCAN: 'Skenovat WiFi sítě',
   IDLE: 'Nečinný',
   LOST: 'Ztraceno',
-  SCANNING: 'Skenování',
   SCAN_AGAIN: 'Skenovat znovu',
-  NETWORK_SCANNER: 'Síťový skener',
   NETWORK_NO_WIFI: 'Nenalezeny žádné WiFi sítě',
   NETWORK_BLANK_BSSID: 'ponechte prázdné pokud použijete jen SSID',
   TX_POWER: 'Vysílací výkon',
@@ -292,9 +282,6 @@ const cs: Translation = {
   ONCHANGE: 'Při změně',
   CONDITION: 'Podmínka',
   SCHEDULE_UPDATED: 'Harmonogram aktualizován',
-  SCHEDULE_TIMER_1: 'při startu',
-  SCHEDULE_TIMER_2: 'každou minutu',
-  SCHEDULE_TIMER_3: 'každou hodinu',
   CUSTOM_ENTITIES: 'Vlastní entity',
   ENTITIES_HELP_1: 'Definujte vlastní EMS entity nebo dynamické uživatelské proměnné',
   ENTITIES_UPDATED: 'Entity aktualizovány',
@@ -310,9 +297,7 @@ const cs: Translation = {
   ACTIVELOW: 'Aktivní nízká',
   UNCHANGED: 'Beze změny',
   ALWAYS: 'Vždy',
-  ACTIVITY: 'Aktivita',
   CONFIGURE: '{0} Konfigurovat',
-  SYSTEM_MEMORY: 'Paměť systému',
   APPLICATION_SETTINGS_1: 'Upravit nastavení aplikace EMS-ESP',
   SECURITY_1: 'Přidat nebo odebrat uživatele',
   DOWNLOAD_UPLOAD_1: 'Stáhnout a nahrát nastavení a firmware',
@@ -324,7 +309,6 @@ const cs: Translation = {
   RENAME: 'Přejmenovat',
   ENABLE_MODBUS: 'Povolit Modbus',
   VIEW_LOG: 'Zobrazit záznam pro diagnostiku problémů',
-  UPLOAD_DRAG: 'přetáhněte soubor sem nebo klikněte pro výběr',
   SERVICES: 'Služby',
   ALLVALUES: 'Všechny hodnoty',
   SPECIAL_FUNCTIONS: 'Speciální funkce',
@@ -352,7 +336,6 @@ const cs: Translation = {
   RELEASE_TYPE: 'Typ sestavení',
   SWITCH_RELEASE_TYPE: 'Přepnout na {0} verzi',
   FIRMWARE_VERSION_INFO: 'Informace o verzi firmwaru',
-  NO_DATA: 'žádné údaje',
   USER_PROFILE: 'Uživatelský profil',
   STORED_VERSIONS: 'Uložené verze',
   ONLINE_HELP: 'online nápověda',
@@ -363,7 +346,6 @@ const cs: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email byl úspěšně odeslán',
   SYSTEM_NAME: 'Název systému',
   COMMANDS: 'Příkazy',
-  COMMANDS_UPDATED: 'Příkazy byly aktualizovány',
   COMMANDS_HELP_1: 'Definujte vlastní příkazy pro magistrali EMS',
   COMMAND_SENT: 'Příkaz odeslán',
   RUN: 'Spustit příkaz',

interface/src/i18n/de/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const de: Translation = {
   LANGUAGE: 'Sprache',
   RETRY: 'Neuer Versuch',
-  LOADING: 'Laden',
   IS_REQUIRED: '{0} ist erforderlich',
   SIGN_IN: 'Einloggen',
   SIGN_OUT: 'Ausloggen',
@@ -50,8 +49,6 @@ const de: Translation = {
   SETTINGS: 'Einstellungen',
   UPDATED_OF: '{0} Aktualisiert',
   UPDATE_OF: '{0} Aktualisieren',
-  REMOVED_OF: '{0} Entfernt',
-  DELETION_OF: '{0} Löschung',
   OFFSET: 'Position',
   FACTOR: 'Faktor',
   FREQ: 'Frequenz',
@@ -64,17 +61,14 @@ const de: Translation = {
   TEMP_SENSORS: 'Temperatursensoren',
   WRITE_CMD_SENT: 'Befehl schreiben wurde gesendet',
   EMS_BUS_WARNING: 'EMS-Bus getrennt. Wenn diese Warnung nach einigen Sekunden immer noch besteht, überprüfen Sie bitte die Einstellungen und das Board-Profil.',
-  EMS_BUS_SCANNING: 'Suche nach EMS Geräten...',
   CONNECTED: 'Verbunden',
   TX_ISSUES: 'Tx-Probleme - Versuchen Sie einen anderen Tx-Modus',
   DISCONNECTED: 'Getrennt',
-  EMS_SCAN: 'Möchten Sie wirklich eine vollständige Gerätesuche des EMS-Busses starten?',
   DATA_TRAFFIC: 'Datenverkehr',
   EMS_DEVICE: 'EMS Gerät',
   SUCCESS: 'ERFOLG',
   FAIL: 'FEHLER',
   QUALITY: 'QUALITÄT',
-  SCAN: 'Suche',
   STATUS_NAMES: [
     'EMS-Telegramme empfangen (Rx)',
     'EMS-Telegramme gelesen (Tx)',
@@ -125,7 +119,6 @@ const de: Translation = {
   ENUM_FORMAT: 'Enum Format API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: '1-Wire parasitäre Stomversorgung',
-  LOGGING: 'Protokollierung',
   LOG_HEX: 'EMS-Telegramme hexadezimal protokollieren',
   ENABLE_SYSLOG: 'Syslog aktivieren',
   LOG_LEVEL: 'Protokollebene',
@@ -170,7 +163,6 @@ const de: Translation = {
   CLOSE: 'Schließen',
   USE: 'Verwenden Sie',
   FACTORY_RESET: 'Werkseinstellung',
-  SYSTEM_FACTORY_TEXT: 'EMS-ESP wurde auf Werkseinstellung gesetzt und startet als Zugangspunkt neu.',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Sind Sie sicher, alle Einstellungen auf Werkseinstellung zu setzen?',
   AVAILABLE_VERSION: 'Neuesten verfügbaren Versionen',
   STABLE: 'Stabil',
@@ -255,9 +247,7 @@ const de: Translation = {
   NETWORK_SCAN: 'Suche nach WiFi-Netzwerken',
   IDLE: 'Leerlauf',
   LOST: 'Verloren',
-  SCANNING: 'Suche',
   SCAN_AGAIN: 'Erneute Suche',
-  NETWORK_SCANNER: 'Netzwerksuche',
   NETWORK_NO_WIFI: 'Keine WiFi-Netzwerke gefunden',
   NETWORK_BLANK_BSSID: 'Freilassen, um nur SSID für die Verbindung zu nutzen.',
   TX_POWER: 'Tx Leistung',
@@ -292,9 +282,6 @@ const de: Translation = {
   ONCHANGE: 'Bei Änderung',
   CONDITION: 'Zustand',
   SCHEDULE_UPDATED: 'Zeitplan aktualisiert',
-  SCHEDULE_TIMER_1: 'beim Start',
-  SCHEDULE_TIMER_2: 'jede Minute',
-  SCHEDULE_TIMER_3: 'jede Stunde',
   CUSTOM_ENTITIES: 'Individuelle Entitäten',
   ENTITIES_HELP_1: 'Definition eigener EMS-Werte oder dynamischer Variablen',
   ENTITIES_UPDATED: 'Entitäten gespeichert',
@@ -310,9 +297,7 @@ const de: Translation = {
   ACTIVELOW: 'Aktiv Negativ',
   UNCHANGED: 'Unverändert',
   ALWAYS: 'Immer',
-  ACTIVITY: 'Aktivität',
   CONFIGURE: 'Konfiguriere {0}',
-  SYSTEM_MEMORY: 'Systemspeicher',
   APPLICATION_SETTINGS_1: 'Ändern Sie die EMS-ESP-Anwendungseinstellungen.',
   SECURITY_1: 'Benutzer hinzufügen oder entfernen',
   DOWNLOAD_UPLOAD_1: 'Einstellungen und Firmware herunterladen/hochladen',
@@ -324,7 +309,6 @@ const de: Translation = {
   RENAME: 'Umbenennen',
   ENABLE_MODBUS: 'Modbus aktivieren',
   VIEW_LOG: 'Sehen Sie sich das Protokoll an, um Probleme zu diagnostizieren.',
-  UPLOAD_DRAG: 'Ziehen Sie eine Datei hierher oder klicken Sie, um eine auszuwählen.',
   SERVICES: 'Dienste',
   ALLVALUES: 'Alle Werte',
   SPECIAL_FUNCTIONS: 'Sonderfunktionen',
@@ -352,7 +336,6 @@ const de: Translation = {
   RELEASE_TYPE: 'Release Typ',
   SWITCH_RELEASE_TYPE: 'Zum {0}-Release wechseln',
   FIRMWARE_VERSION_INFO: 'Firmware-Versionsinformation',
-  NO_DATA: 'Keine Daten',
   USER_PROFILE: 'Benutzerprofil',
   STORED_VERSIONS: 'Gespeicherte Versionen',
   ONLINE_HELP: 'Online-Hilfe',
@@ -363,7 +346,6 @@ const de: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email erfolgreich gesendet',
   SYSTEM_NAME: 'Systemname',
   COMMANDS: 'Befehle',
-  COMMANDS_UPDATED: 'Befehle wurden aktualisiert',
   COMMANDS_HELP_1: 'Definieren Sie eigene Befehle für die EMS-Magistral',
   COMMAND_SENT: 'Befehl gesendet',
   RUN: 'Befehl ausführen',

interface/src/i18n/en/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const en: Translation = {
   LANGUAGE: 'Language',
   RETRY: 'Retry',
-  LOADING: 'Loading',
   IS_REQUIRED: '{0} is required',
   SIGN_IN: 'Sign In',
   SIGN_OUT: 'Sign Out',
@@ -50,8 +49,6 @@ const en: Translation = {
   SETTINGS: 'Settings',
   UPDATED_OF: '{0} Updated',
   UPDATE_OF: '{0} Update',
-  REMOVED_OF: '{0} Removed',
-  DELETION_OF: '{0} Deletion',
   OFFSET: 'Offset',
   FACTOR: 'Factor',
   FREQ: 'Frequency',
@@ -64,17 +61,14 @@ const en: Translation = {
   TEMP_SENSORS: 'Temperature Sensors',
   WRITE_CMD_SENT: 'Write command sent',
   EMS_BUS_WARNING: 'EMS bus disconnected. If this warning still persists after a few seconds please check settings and board profile',
-  EMS_BUS_SCANNING: 'Scanning for EMS devices...',
   CONNECTED: 'Connected',
   TX_ISSUES: 'Tx issues - check Tx Mode',
   DISCONNECTED: 'Disconnected',
-  EMS_SCAN: 'Are you sure you want to initiate a full device scan of the EMS bus?',
   DATA_TRAFFIC: 'Data Traffic',
   EMS_DEVICE: 'EMS Device',
   SUCCESS: 'SUCCESS',
   FAIL: 'FAIL',
   QUALITY: 'QUALITY',
-  SCAN: 'Scan',
   STATUS_NAMES: [
     'EMS Telegrams Received (Rx)',
     'EMS Reads (Tx)',
@@ -125,7 +119,6 @@ const en: Translation = {
   ENUM_FORMAT: 'Enum Format API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Enable 1-Wire Parasite-Power',
-  LOGGING: 'Logging',
   LOG_HEX: 'Log EMS telegrams in hexadecimal',
   ENABLE_SYSLOG: 'Enable Syslog',
   LOG_LEVEL: 'Log Level',
@@ -170,7 +163,6 @@ const en: Translation = {
   CLOSE: 'Close',
   USE: 'Use',
   FACTORY_RESET: 'Factory Reset',
-  SYSTEM_FACTORY_TEXT: 'Device has been factory reset and will now restart',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Are you sure you want to reset EMS-ESP to its factory defaults?',
   AVAILABLE_VERSION: 'Latest Available Versions',
   STABLE: 'Stable',
@@ -255,9 +247,7 @@ const en: Translation = {
   NETWORK_SCAN: 'Scan WiFi Networks',
   IDLE: 'Idle',
   LOST: 'Lost',
-  SCANNING: 'Scanning',
   SCAN_AGAIN: 'Scan again',
-  NETWORK_SCANNER: 'Network Scanner',
   NETWORK_NO_WIFI: 'No WiFi networks found',
   NETWORK_BLANK_BSSID: 'leave blank to use only SSID',
   TX_POWER: 'Tx Power',
@@ -292,9 +282,6 @@ const en: Translation = {
   ONCHANGE: 'On Change',
   CONDITION: 'Condition',
   SCHEDULE_UPDATED: 'Schedule updated',
-  SCHEDULE_TIMER_1: 'on startup',
-  SCHEDULE_TIMER_2: 'every minute',
-  SCHEDULE_TIMER_3: 'every hour',
   CUSTOM_ENTITIES: 'Custom Entities',
   ENTITIES_HELP_1: 'Define custom EMS entities or dynamic user variables',
   ENTITIES_UPDATED: 'Entities updated',
@@ -310,9 +297,7 @@ const en: Translation = {
   ACTIVELOW: 'Active Low',
   UNCHANGED: 'Unchanged',
   ALWAYS: 'Always',
-  ACTIVITY: 'Activity',
   CONFIGURE: 'Configure {0}',
-  SYSTEM_MEMORY: 'System Memory',
   APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings',
   SECURITY_1: 'Add or remove users',
   DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware',
@@ -324,7 +309,6 @@ const en: Translation = {
   RENAME: 'Rename',
   ENABLE_MODBUS: 'Enable Modbus',
   VIEW_LOG: 'View log to diagnose issues',
-  UPLOAD_DRAG: 'drag and drop a file here or click to select one',
   SERVICES: 'Services',
   ALLVALUES: 'All Values',
   SPECIAL_FUNCTIONS: 'Special Functions',
@@ -352,7 +336,6 @@ const en: Translation = {
   RELEASE_TYPE: 'Release Type',
   SWITCH_RELEASE_TYPE: 'Switch to {0} release',
   FIRMWARE_VERSION_INFO: 'Firmware Version Information',
-  NO_DATA: 'No data',
   USER_PROFILE: 'User Profile',
   STORED_VERSIONS: 'Stored Versions',
   ONLINE_HELP: 'online help',
@@ -363,7 +346,6 @@ const en: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email sent successfully',
   SYSTEM_NAME: 'System Name',
   COMMANDS: 'Commands',
-  COMMANDS_UPDATED: 'Commands updated',
   COMMANDS_HELP_1: 'Define reusable named commands below. These can be executed from the console, API/MQTT, or referenced by the Scheduler',
   COMMAND_SENT: 'Command sent',
   RUN: 'Run',

interface/src/i18n/fr/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const fr: Translation = {
   LANGUAGE: 'Langue',
   RETRY: 'Réessayer',
-  LOADING: 'Chargement',
   IS_REQUIRED: '{0} est requis',
   SIGN_IN: 'Se connecter',
   SIGN_OUT: 'Se déconnecter',
@@ -50,8 +49,6 @@ const fr: Translation = {
   SETTINGS: 'Paramètres',
   UPDATED_OF: '{0} mis à jour',
   UPDATE_OF: 'Mise à jour de {0}',
-  REMOVED_OF: '{0} enlevé',
-  DELETION_OF: '{0} supprimé',
   OFFSET: 'Offset',
   FACTOR: 'Facteur',
   FREQ: 'Fréquence',
@@ -64,17 +61,14 @@ const fr: Translation = {
   TEMP_SENSORS: 'Capteurs de température',
   WRITE_CMD_SENT: 'Envoyer la commande sent',
   EMS_BUS_WARNING: 'Bus EMS déconnecté. Si ce message persiste après quelques secondes, vérifiez les paramètres et la configuration de la carte.',
-  EMS_BUS_SCANNING: 'Scan des appareils EMS...',
   CONNECTED: 'Connecté',
   TX_ISSUES: 'Problèmes de transmission (Tx) - Essayez un autre mode Tx',
   DISCONNECTED: 'Déconnecté',
-  EMS_SCAN: 'Etes-vous sûr de vouloir lancer un scan complet du bus EMS ?',
   DATA_TRAFFIC: 'Traffic des données',
   EMS_DEVICE: 'Appareils EMS',
   SUCCESS: 'SUCCÈS',
   FAIL: 'ÉCHEC',
   QUALITY: 'QUALITÉ',
-  SCAN: 'Scan',
   STATUS_NAMES: [
     'Télégrammes EMS reçus (Rx)',
     'Lectures EMS (Tx)',
@@ -125,7 +119,6 @@ const fr: Translation = {
   ENUM_FORMAT: 'Format enum API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Activer la puissance 1-wire parasite',
-  LOGGING: 'Journal',
   LOG_HEX: 'Enregistrer les télégrammes EMS en hexadécimal',
   ENABLE_SYSLOG: 'Activer les logs système',
   LOG_LEVEL: 'Niveau de log',
@@ -170,7 +163,6 @@ const fr: Translation = {
   CLOSE: 'Fermer',
   USE: 'Utiliser',
   FACTORY_RESET: 'Réinitialisation',
-  SYSTEM_FACTORY_TEXT: "L'appareil a été réinitialisé et va maintenant redémarrer",
   SYSTEM_FACTORY_TEXT_DIALOG: "Êtes-vous sûr de vouloir réinitialiser l'appareil à ses paramètres d'usine ?",
   AVAILABLE_VERSION: 'Versions disponibles',
   STABLE: 'Stable',
@@ -255,9 +247,7 @@ const fr: Translation = {
   NETWORK_SCAN: 'Scanner les réseaux WiFi',
   IDLE: 'Inactif',
   LOST: 'Perdu',
-  SCANNING: 'Scan en cours',
   SCAN_AGAIN: 'Rescanner',
-  NETWORK_SCANNER: 'Scan réseau',
   NETWORK_NO_WIFI: 'Pas de réseau WiFi trouvé',
   NETWORK_BLANK_BSSID: 'laisser vide pour utiliser uniquement le SSID',
   TX_POWER: 'Puissance Tx',
@@ -292,9 +282,6 @@ const fr: Translation = {
   ONCHANGE: 'Sur le changement',
   CONDITION: 'Condition',
   SCHEDULE_UPDATED: 'Programme mis à jour',
-  SCHEDULE_TIMER_1: 'au démarrage',
-  SCHEDULE_TIMER_2: 'toutes les minutes',
-  SCHEDULE_TIMER_3: 'toutes les heures',
   CUSTOM_ENTITIES: 'Entités personnalisées',
   ENTITIES_HELP_1: 'Récupérer les entités personnalisées du bus EMS',
   ENTITIES_UPDATED: 'Entités mises à jour',
@@ -310,9 +297,7 @@ const fr: Translation = {
   ACTIVELOW: 'Actif bas',
   UNCHANGED: 'Inchangé',
   ALWAYS: 'Toujours',
-  ACTIVITY: 'Activité',
   CONFIGURE: 'Configurer {0}',
-  SYSTEM_MEMORY: 'Mémoire système',
   APPLICATION_SETTINGS_1: 'Modifier les paramètres de l\'application EMS-ESP',
   SECURITY_1: 'Ajouter ou supprimer des utilisateurs',
   DOWNLOAD_UPLOAD_1: 'Télécharger et mettre à jour les paramètres et le firmware',
@@ -324,7 +309,6 @@ const fr: Translation = {
   RENAME: 'Renommer',
   ENABLE_MODBUS: 'Activer Modbus',
   VIEW_LOG: 'Voir le journal pour diagnostiquer les problèmes',
-  UPLOAD_DRAG: 'glisser-déposer un fichier ici ou cliquer pour en sélectionner un',
   SERVICES: 'Services',
   ALLVALUES: 'Toutes les valeurs',
   SPECIAL_FUNCTIONS: 'Fonctions spéciales',
@@ -352,7 +336,6 @@ const fr: Translation = {
   RELEASE_TYPE: 'Type de version',
   SWITCH_RELEASE_TYPE: 'Passer à la version {0}',
   FIRMWARE_VERSION_INFO: 'Informations sur la version du firmware',
-  NO_DATA: 'Aucune donnée',
   USER_PROFILE: 'Profil utilisateur',
   STORED_VERSIONS: 'Versions stockées',
   ONLINE_HELP: 'aide en ligne',
@@ -363,7 +346,6 @@ const fr: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email envoyé avec succès',
   SYSTEM_NAME: 'Nom du système',
   COMMANDS: 'Commandes',
-  COMMANDS_UPDATED: 'Commandes mises à jour',
   COMMANDS_HELP_1: 'Définir des commandes personnalisées pour la magistral EMS',
   COMMAND_SENT: 'Commande envoyée',
   RUN: 'Exécuter une commande',

interface/src/i18n/it/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const it: Translation = {
   LANGUAGE: 'Lingua',
   RETRY: 'Riprovare',
-  LOADING: 'Caricamento',
   IS_REQUIRED: '{0} é richiesto',
   SIGN_IN: 'Connettersi',
   SIGN_OUT: 'Disconnettersi',
@@ -50,8 +49,6 @@ const it: Translation = {
   SETTINGS: 'Settings',
   UPDATED_OF: '{0} Aggiornati',
   UPDATE_OF: 'Aggiorna {0}',
-  REMOVED_OF: '{0} Rimossi',
-  DELETION_OF: '{0} Cancellati',
   OFFSET: 'Offset',
   FACTOR: 'Fattore',
   FREQ: 'Frequenza',
@@ -64,17 +61,14 @@ const it: Translation = {
   TEMP_SENSORS: 'Sensori Temperatura',
   WRITE_CMD_SENT: 'Scrittura comando inviata',
   EMS_BUS_WARNING: 'EMS bus disconnesso. Se questo avvertimento persiste dopo alcuni secondi prego verificare impostazioni scheda',
-  EMS_BUS_SCANNING: 'Scansione dispositivi EMS ...',
   CONNECTED: 'Connesso',
   TX_ISSUES: 'Problema di Tx - prova una modalità differente',
   DISCONNECTED: 'Disconnesso',
-  EMS_SCAN: 'Sei sicuro di voler iniziare una scansione completa del bus EMS ?',
   DATA_TRAFFIC: 'Traffico dati',
   EMS_DEVICE: 'Dispositivo EMS ',
   SUCCESS: 'SUCCESSO',
   FAIL: 'FALLITO',
   QUALITY: 'QUALITÂ',
-  SCAN: 'Scansione',
   STATUS_NAMES: [
     'Telegrammi EMS Ricevuti (Rx)',
     'EMS Letti (Tx)',
@@ -125,7 +119,6 @@ const it: Translation = {
   ENUM_FORMAT: 'Enum Format API/MQTT',
   INDEX: 'Indice',
   ENABLE_PARASITE: 'Abilita potenza 1-wire parassita',
-  LOGGING: 'Registrazione',
   LOG_HEX: 'Registra telegrammi EMS in esadecimale',
   ENABLE_SYSLOG: 'Abilita Syslog',
   LOG_LEVEL: 'Livello registrazione',
@@ -170,7 +163,6 @@ const it: Translation = {
   CLOSE: 'Chiudere',
   USE: 'Usa',
   FACTORY_RESET: 'Impostazioni di fabbrica',
-  SYSTEM_FACTORY_TEXT: 'Il dispositivo è stato ripristinato alle impostazioni di fabbrica e ora verrà riavviato',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Sei sicuro di voler ripristinare il dispositivo alle impostazioni di fabbrica??',
   AVAILABLE_VERSION: 'Versioni disponibili',
   STABLE: 'Stabile',
@@ -255,9 +247,7 @@ const it: Translation = {
   NETWORK_SCAN: 'Scansione reti WiFi',
   IDLE: 'Inattivo',
   LOST: 'Perso',
-  SCANNING: 'Scansione',
   SCAN_AGAIN: 'Scansiona ancora',
-  NETWORK_SCANNER: 'Scansione Rete',
   NETWORK_NO_WIFI: 'Nessuana rete WiFi trovata',
   NETWORK_BLANK_BSSID: 'lasciare vuoto per usare solo SSID',
   TX_POWER: 'Potenza Tx',
@@ -292,9 +282,6 @@ const it: Translation = {
   ONCHANGE: 'Sul cambiamento',
   CONDITION: 'Condizione',
   SCHEDULE_UPDATED: 'Calendario aggiornato',
-  SCHEDULE_TIMER_1: 'All avvio',
-  SCHEDULE_TIMER_2: 'Ogni minuto',
-  SCHEDULE_TIMER_3: 'Ogni ora',
   CUSTOM_ENTITIES: 'Entità personalizzate',
   ENTITIES_HELP_1: 'Recupera entità personalizzate dal BUS EMS',
   ENTITIES_UPDATED: 'Entità aggiornate',
@@ -310,9 +297,7 @@ const it: Translation = {
   ACTIVELOW: 'Active Low',
   UNCHANGED: 'Unchanged',
   ALWAYS: 'Always',
-  ACTIVITY: 'Activity',
   CONFIGURE: 'Configure {0}',
-  SYSTEM_MEMORY: 'System Memory',
   APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings',
   SECURITY_1: 'Add or remove users',
   DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware',
@@ -324,7 +309,6 @@ const it: Translation = {
   RENAME: 'Rename',
   ENABLE_MODBUS: 'Abilita Modbus',
   VIEW_LOG: 'Visualizza log per diagnosticare problemi',
-  UPLOAD_DRAG: 'trascina e rilascia un file qui o clicca per selezionare uno',
   SERVICES: 'Servizi',
   ALLVALUES: 'Tutti i valori',
   SPECIAL_FUNCTIONS: 'Funzioni speciali',
@@ -352,7 +336,6 @@ const it: Translation = {
   RELEASE_TYPE: 'Tipo di rilascio',
   SWITCH_RELEASE_TYPE: 'Cambia in {0} rilascio',
   FIRMWARE_VERSION_INFO: 'Informazioni sulla versione del firmware',
-  NO_DATA: 'Nessun dato',
   USER_PROFILE: 'Profilo utente',
   STORED_VERSIONS: 'Versioni memorizzate',
   ONLINE_HELP: 'aiuto online',
@@ -363,7 +346,6 @@ const it: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email inviata con successo',
   SYSTEM_NAME: 'Nome del sistema',
   COMMANDS: 'Comandi',
-  COMMANDS_UPDATED: 'Comandi aggiornati',
   COMMANDS_HELP_1: 'Definisci comandi personalizzati per la magistrali EMS',
   COMMAND_SENT: 'Comando inviato',
   RUN: 'Esegui comando',

interface/src/i18n/nl/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const nl: Translation = {
   LANGUAGE: 'Taal',
   RETRY: 'Opnieuw proberen',
-  LOADING: 'Laden',
   IS_REQUIRED: '{0} is verplicht',
   SIGN_IN: 'Inloggen',
   SIGN_OUT: 'Uitloggen',
@@ -50,8 +49,6 @@ const nl: Translation = {
   SETTINGS: 'Instellingen',
   UPDATED_OF: '{0} Bijgewerkt',
   UPDATE_OF: '{0} Bijwerken',
-  REMOVED_OF: '{0} Verwijderd',
-  DELETION_OF: '{0} Verwijder',
   OFFSET: 'Offset',
   FACTOR: 'Factor',
   FREQ: 'Frequentie',
@@ -64,17 +61,14 @@ const nl: Translation = {
   TEMP_SENSORS: 'Temperatuur Sensoren',
   WRITE_CMD_SENT: 'Schrijf commando gestuurd',
   EMS_BUS_WARNING: 'EMS bus niet gevonden. Als deze waarschuwing blijft staan na een paar seconden loop dan de instellingen na en in het bijzonder het apparaat type profiel.',
-  EMS_BUS_SCANNING: 'Scannen naar EMS apparaten...',
   CONNECTED: 'Verbonden',
   TX_ISSUES: 'Tx bus probleem. Probeer een andere Tx verzendmodus',
   DISCONNECTED: 'Niet verbonden',
-  EMS_SCAN: 'Weet je zeker dat je een volledige EMS bus scan uit wilt voeren?',
   DATA_TRAFFIC: 'Dataverkeer',
   EMS_DEVICE: 'EMS Apparaat',
   SUCCESS: 'SUCCESS',
   FAIL: 'MISLUKT',
   QUALITY: 'KWALITEIT',
-  SCAN: 'Scan',
   STATUS_NAMES: [
     'EMS Telegrammen ontvangen (Rx)',
     'EMS Leesopdrachten (Tx)',
@@ -125,7 +119,6 @@ const nl: Translation = {
   ENUM_FORMAT: 'Enum formaat API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Activeer 1-wire parasitaire modus',
-  LOGGING: 'Logging',
   LOG_HEX: 'Log EMS telegrammen in hexadecimaal',
   ENABLE_SYSLOG: 'Activeer Syslog',
   LOG_LEVEL: 'Log Level',
@@ -170,7 +163,6 @@ const nl: Translation = {
   CLOSE: 'Sluiten',
   USE: 'Gebruik',
   FACTORY_RESET: 'Fabrieksinstellingen',
-  SYSTEM_FACTORY_TEXT: 'Gateway is gereset en start nu weer op met fabrieksinstellingen',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Weet je zeker dat je een reset naar fabrieksinstellingen uit wilt voeren?',
   AVAILABLE_VERSION: 'Nieuwste beschikbare versies',
   STABLE: 'Stable',
@@ -255,9 +247,7 @@ const nl: Translation = {
   NETWORK_SCAN: 'Scan WiFi Netwerken',
   IDLE: 'Inactief',
   LOST: 'Verloren',
-  SCANNING: 'Scannen',
   SCAN_AGAIN: 'Opnieuw scannen',
-  NETWORK_SCANNER: 'Netwerk Scannen',
   NETWORK_NO_WIFI: 'Geen WiFi netwerken gevonden',
   NETWORK_BLANK_BSSID: 'laat leeg om alleen SSID te bebruiken',
   TX_POWER: 'Tx Vermogen',
@@ -292,9 +282,6 @@ const nl: Translation = {
   ONCHANGE: 'Op verandering',
   CONDITION: 'Voorwaarde',
   SCHEDULE_UPDATED: 'Schema bijgewerkt',
-  SCHEDULE_TIMER_1: 'bij het opstarten',
-  SCHEDULE_TIMER_2: 'elke minuut',
-  SCHEDULE_TIMER_3: 'elke huur',
   CUSTOM_ENTITIES: 'Eigen entiteiten',
   ENTITIES_HELP_1: 'Eigen entiteiten ophalen uit de EMS-bus',
   ENTITIES_UPDATED: 'Entiteiten bijgewerkt',
@@ -310,9 +297,7 @@ const nl: Translation = {
   ACTIVELOW: 'Actiev Laag',
   UNCHANGED: 'Ongewijzigd',
   ALWAYS: 'Altijd',
-  ACTIVITY: 'Activiteit',
   CONFIGURE: '{0} Configureren',
-  SYSTEM_MEMORY: 'System Geheugen',
   APPLICATION_SETTINGS_1: 'Applicatie-instellingen wijzigen',
   SECURITY_1: 'Gebruikers toevoegen of verwijderen',
   DOWNLOAD_UPLOAD_1: 'Download en upload instellingen en firmware',
@@ -324,7 +309,6 @@ const nl: Translation = {
   RENAME: 'Hernoemen',
   ENABLE_MODBUS: 'Activeer Modbus',
   VIEW_LOG: 'Log weergeven om problemen te diagnosticeren',
-  UPLOAD_DRAG: 'sleep hier een bestand en zet het neer of klik om er een te selecteren',
   SERVICES: 'Services',
   ALLVALUES: 'All waarden',
   SPECIAL_FUNCTIONS: 'Speciale functies',
@@ -352,7 +336,6 @@ const nl: Translation = {
   RELEASE_TYPE: 'Release Typ',
   SWITCH_RELEASE_TYPE: 'Switch naar {0} release',
   FIRMWARE_VERSION_INFO: 'Informatie over firmwareversie',
-  NO_DATA: 'Geen data',
   USER_PROFILE: 'Gebruikersprofiel',
   STORED_VERSIONS: 'Opgeslagen versies',
   ONLINE_HELP: 'online help',
@@ -363,7 +346,6 @@ const nl: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email verzonden succesvol',
   SYSTEM_NAME: 'Systeemnaam',
   COMMANDS: 'Commando\'s',
-  COMMANDS_UPDATED: 'Commando\'s bijgewerkt',
   COMMANDS_HELP_1: 'Definieer hergebruikbare benoemde commando\'s hieronder. Deze kunnen worden uitgevoerd vanuit de console, API/MQTT, of worden aangeroepen door de Scheduler',
   COMMAND_SENT: 'Commando verzonden',
   RUN: 'Commando uitvoeren',

interface/src/i18n/no/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const no: Translation = {
   LANGUAGE: 'Språk',
   RETRY: 'Forsøk igjen',
-  LOADING: 'Laster',
   IS_REQUIRED: '{0} er nødvendig',
   SIGN_IN: 'Logg inn',
   SIGN_OUT: 'Logg ut',
@@ -50,8 +49,6 @@ const no: Translation = {
   SETTINGS: 'Innstillinger',
   UPDATED_OF: '{0} Oppdatert',
   UPDATE_OF: '{0} Oppdater',
-  REMOVED_OF: '{0} Slettet',
-  DELETION_OF: '{0} Sletting',
   OFFSET: 'Kompensering',
   FACTOR: 'Faktor',
   FREQ: 'Frekvens',
@@ -64,17 +61,14 @@ const no: Translation = {
   TEMP_SENSORS: 'Temperaturesensorer',
   WRITE_CMD_SENT: 'Skriv kommando sent',
   EMS_BUS_WARNING: 'EMS bussen koblet ned. Hvis denne advarselen fortsetter etter noen f¨sekunder sjekk instillinger og  prosessorkort',
-  EMS_BUS_SCANNING: 'Søker etter EMS enheter...',
   CONNECTED: 'Tilkoblet',
   TX_ISSUES: 'Tx problemer - prøv en annen Tx Modus',
   DISCONNECTED: 'Frakoblet',
-  EMS_SCAN: 'Er du sikker på du vil starte full søking av EMS bussen?',
   DATA_TRAFFIC: 'Data trafikk',
   EMS_DEVICE: 'EMS Enhet',
   SUCCESS: 'VELLYKKET',
   FAIL: 'MISLYKKET',
   QUALITY: 'KVALITET',
-  SCAN: 'Søk',
   STATUS_NAMES: [
     'EMS Telegrammer Mottatt (Rx)',
     'EMS Lest (Tx)',
@@ -125,7 +119,6 @@ const no: Translation = {
   ENUM_FORMAT: 'Enum Format API/MQTT',
   INDEX: 'Indeks',
   ENABLE_PARASITE: 'Aktiver 1-wire parasitt strømforsyning',
-  LOGGING: 'Logging',
   LOG_HEX: 'Logg EMS telegrammer i hexadesimal',
   ENABLE_SYSLOG: 'Aktiver Syslog',
   LOG_LEVEL: 'Log Level',
@@ -170,7 +163,6 @@ const no: Translation = {
   CLOSE: 'Steng',
   USE: 'Bruk',
   FACTORY_RESET: 'Sett tilbake til fabrikkinstilling',
-  SYSTEM_FACTORY_TEXT: 'Enhet har blitt satt tilbake til fabrikkinstilling og vil restarte',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Er du sikker på at du vil resette enheten til fabrikkinstillinger?',
   AVAILABLE_VERSION: 'Tilgjengelige versjoner',
   STABLE: 'Stabil',
@@ -255,9 +247,7 @@ const no: Translation = {
   NETWORK_SCAN: 'Søk etter trådløst nettverk',
   IDLE: 'Klar',
   LOST: 'Mistet',
-  SCANNING: 'Søker',
   SCAN_AGAIN: 'Søk igjen',
-  NETWORK_SCANNER: 'Nettverk Scanner',
   NETWORK_NO_WIFI: 'Ingen trådløse nett funnet',
   NETWORK_BLANK_BSSID: 'la feltet være blankt for å bruke kun SSID',
   TX_POWER: 'Tx Effekt',
@@ -292,9 +282,6 @@ const no: Translation = {
   ONCHANGE: 'På endring',
   CONDITION: 'Betingelse',
   SCHEDULE_UPDATED: 'Planlegger er oppdatert',
-  SCHEDULE_TIMER_1: 'ved oppstart',
-  SCHEDULE_TIMER_2: 'hvert minutt',
-  SCHEDULE_TIMER_3: 'hver time',
   CUSTOM_ENTITIES: 'Personlige entiteter',
   ENTITIES_HELP_1: 'Hent personlige entiteter fra EMS bussen',
   ENTITIES_UPDATED: 'Entiteter oppdatert',
@@ -310,9 +297,7 @@ const no: Translation = {
   ACTIVELOW: 'Active Low',
   UNCHANGED: 'Unchanged',
   ALWAYS: 'Always',
-  ACTIVITY: 'Aktivitet',
   CONFIGURE: 'Konfigurer {0}',
-  SYSTEM_MEMORY: 'System Memory',
   APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings',
   SECURITY_1: 'Add or remove users',
   DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware',
@@ -324,7 +309,6 @@ const no: Translation = {
   RENAME: 'Gi nytt navn',
   ENABLE_MODBUS: 'Aktiver Modbus',
   VIEW_LOG: 'Se logg for å diagnostisere problemer',
-  UPLOAD_DRAG: 'dra og slippe en fil her eller klikk for å velge en',
   SERVICES: 'Tjenester',
   ALLVALUES: 'Alle verdier',
   SPECIAL_FUNCTIONS: 'Spesielle funksjoner',
@@ -352,7 +336,6 @@ const no: Translation = {
   RELEASE_TYPE: 'Utgivelses type',
   SWITCH_RELEASE_TYPE: 'Bytt til {0} utgivelse',
   FIRMWARE_VERSION_INFO: 'Informasjon om firmwareversjon',
-  NO_DATA: 'Ingen data',
   USER_PROFILE: 'Brukerprofil',
   STORED_VERSIONS: 'Lagret versjoner',
   ONLINE_HELP: 'online hjelp',
@@ -363,7 +346,6 @@ const no: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email sendt suksessfullt',
   SYSTEM_NAME: 'Systemnavn',
   COMMANDS: 'Kommandoer',
-  COMMANDS_UPDATED: 'Kommandoer oppdatert',
   COMMANDS_HELP_1: 'Definer egne kommandoer for EMS-Magistral',
   COMMAND_SENT: 'Kommando sendt',
   RUN: 'Kjør',

interface/src/i18n/pl/index.ts

@@ -3,7 +3,6 @@ import type { BaseTranslation } from '../i18n-types';
 const pl: BaseTranslation = {
   LANGUAGE: 'Język',
   RETRY: 'Ponów',
-  LOADING: 'Ładowanie',
   IS_REQUIRED: 'Pole {0} nie może być puste!',
   SIGN_IN: 'Zaloguj się',
   SIGN_OUT: 'Wyloguj się',
@@ -50,8 +49,6 @@ const pl: BaseTranslation = {
   SETTINGS: '{{U|u|}}stawienia',
   UPDATED_OF: 'Zaktualizowano {0}.',
   UPDATE_OF: 'Aktualizacja {0}',
-  REMOVED_OF: 'Usunięto ustawienia {0}.',
-  DELETION_OF: 'Kasowanie {0}',
   OFFSET: 'Korekta ±',
   FACTOR: 'Mnożnik',
   FREQ: 'Częstotliwość',
@@ -64,17 +61,14 @@ const pl: BaseTranslation = {
   TEMP_SENSORS: 'Czujniki temperatury 1-Wire®',
   WRITE_CMD_SENT: 'Komenda zapisu została wysłana.',
   EMS_BUS_WARNING: 'Brak połączenia z magistralą EMS. Jeśli ten błąd występuje dłużej niż kilka sekund, sprawdź ustawienia oraz profil płytki interfejsu.',
-  EMS_BUS_SCANNING: 'Trwa skanowanie urządzeń na magistrali EMS...',
   CONNECTED: '{{połączono|połączenie|}}',
   TX_ISSUES: 'problem z zapisem na magistralę EMS, spróbuj wybrać inny "Tryb transmisji (Tx)"',
   DISCONNECTED: 'brak połączenia',
-  EMS_SCAN: 'Czy na pewno wykonać pełne skanowanie magistrali EMS?',
   DATA_TRAFFIC: 'Ruch Danych',
   EMS_DEVICE: 'Urządzenie EMS',
   SUCCESS: 'Udane',
   FAIL: 'Nieudane',
   QUALITY: 'Jakość',
-  SCAN: 'Skanuj',
   STATUS_NAMES: [
     'EMS, telegramy odebrane (Rx)',
     'EMS, wysłane telegramy "odczyt" (Tx)',
@@ -125,7 +119,6 @@ const pl: BaseTranslation = {
   ENUM_FORMAT: 'Wartości z listy w API/MQTT',
   INDEX: 'indeks',
   ENABLE_PARASITE: 'Aktywuj zasilanie 1-wire pasożytnicze',
-  LOGGING: 'Logowanie',
   LOG_HEX: 'Loguj telegramy EMS w systemie szesnastkowym (hex)',
   ENABLE_SYSLOG: 'Aktywuj SysLog',
   LOG_LEVEL: 'Poziom logowania',
@@ -170,7 +163,6 @@ const pl: BaseTranslation = {
   CLOSE: 'Zamknij',
   USE: 'Aby zaktualizować firmware skorzystaj z funkcji',
   FACTORY_RESET: 'Ustawienia fabryczne',
-  SYSTEM_FACTORY_TEXT: 'Interfejs EMS-ESP został przywrócony do ustawień fabrycznych i zostanie teraz ponownie uruchomiony.',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Na pewno chcesz przywrócić ustawienia fabryczne interfejsu EMS-ESP?',
   AVAILABLE_VERSION: 'Najnowsze dostępne wersje',
   STABLE: 'Stabilna',
@@ -255,9 +247,7 @@ const pl: BaseTranslation = {
   NETWORK_SCAN: 'Skanowanie sieci WiFi',
   IDLE: 'bezczynna',
   LOST: 'zostało utracone.',
-  SCANNING: 'Skanuję',
   SCAN_AGAIN: 'Skanuj ponownie',
-  NETWORK_SCANNER: 'Skaner sieci WiFi',
   NETWORK_NO_WIFI: 'Brak sieci WiFi w zasięgu',
   NETWORK_BLANK_BSSID: 'pozostaw puste aby używać tylko SSID',
   TX_POWER: 'Moc nadawania',
@@ -292,9 +282,6 @@ const pl: BaseTranslation = {
   ONCHANGE: 'O zmianie',
   CONDITION: 'Stan',
   SCHEDULE_UPDATED: 'Harmonogram został uaktualniony.',
-  SCHEDULE_TIMER_1: 'przy starcie',
-  SCHEDULE_TIMER_2: 'co minutę',
-  SCHEDULE_TIMER_3: 'co godzinę',
   CUSTOM_ENTITIES: '{{N|n|}}iestandardowe{{|j|}} encj{{e|i|}}',
   ENTITIES_HELP_1: 'Zdefiniuj niestandardowe encje dla magistrali EMS',
   ENTITIES_UPDATED: 'Niestandardowe encje zostały uaktualnione.',
@@ -310,9 +297,7 @@ const pl: BaseTranslation = {
   ACTIVELOW: 'Wyzwalany stanem niskim',
   UNCHANGED: 'Zachowaj stan',
   ALWAYS: 'Zawsze',
-  ACTIVITY: 'Aktywność',
   CONFIGURE: 'Konfiguracja {0}',
-  SYSTEM_MEMORY: 'Pamięć systemowa',
   APPLICATION_SETTINGS_1: 'Modyfikacja ustawień aplikacji EMS-ESP',
   SECURITY_1: 'Dodawanie i usuwanie użytkowników',
   DOWNLOAD_UPLOAD_1: 'Pobieranie/wysyłanie ustawień i firmware',
@@ -324,7 +309,6 @@ const pl: BaseTranslation = {
   RENAME: 'Zmień nazwę',
   ENABLE_MODBUS: 'Aktywuj Modbus',
   VIEW_LOG: 'Zdiagnozuj problemy',
-  UPLOAD_DRAG: 'przeciągnij i upuść plik lub kliknij tutaj',
   SERVICES: 'Usługi',
   ALLVALUES: 'Wszystkie wartości',
   SPECIAL_FUNCTIONS: 'Specjalne funkcje',
@@ -352,7 +336,6 @@ const pl: BaseTranslation = {
   RELEASE_TYPE: 'Typ wydania',
   SWITCH_RELEASE_TYPE: 'Zmień na {0} wydanie',
   FIRMWARE_VERSION_INFO: 'Informacje o wersji firmware',
-  NO_DATA: 'Brak danych',
   USER_PROFILE: 'Profil użytkownika',
   STORED_VERSIONS: 'Zapisane wersje',
   ONLINE_HELP: 'pomoc online',
@@ -363,7 +346,6 @@ const pl: BaseTranslation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email wysłany pomyślnie',
   SYSTEM_NAME: 'Nazwa systemu',
   COMMANDS: 'Komendy',
-  COMMANDS_UPDATED: 'Komendy zostały zaktualizowane',
   COMMANDS_HELP_1: 'Zdefiniuj niestandardowe komendy dla magistrali EMS',
   COMMAND_SENT: 'Komenda wysłana',
   RUN: 'Wykonaj',

interface/src/i18n/sk/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const sk: Translation = {
   LANGUAGE: 'Jazyk',
   RETRY: 'Opakovať',
-  LOADING: 'Načítanie',
   IS_REQUIRED: '{0} je požadovaná',
   SIGN_IN: 'Prihlásiť sa',
   SIGN_OUT: 'Odhlásiť sa',
@@ -50,8 +49,6 @@ const sk: Translation = {
   SETTINGS: 'Nastavenia',
   UPDATED_OF: '{0} aktualizovaných',
   UPDATE_OF: '{0} aktualizované',
-  REMOVED_OF: '{0} odstránených',
-  DELETION_OF: '{0} zmazaných',
   OFFSET: 'Ofset',
   FACTOR: 'Faktor',
   FREQ: 'Frekvencia',
@@ -64,17 +61,14 @@ const sk: Translation = {
   TEMP_SENSORS: 'Snímače teploty',
   WRITE_CMD_SENT: 'Príkaz zápisu bol odoslaný',
   EMS_BUS_WARNING: 'Zbernica EMS odpojená. Ak toto upozornenie pretrváva aj po niekoľkých sekundách, skontrolujte nastavenia a profil dosky',
-  EMS_BUS_SCANNING: 'Zisťovanie EMS zariadení...',
   CONNECTED: 'Pripojené',
   TX_ISSUES: 'Problémy s Tx – skontrolujte Tx režim',
   DISCONNECTED: 'Odpojené',
-  EMS_SCAN: 'Naozaj chcete spustiť úplnú kontrolu zariadenia zbernice EMS?',
   DATA_TRAFFIC: 'Dátová prevádzka',
   EMS_DEVICE: 'EMS zariadenie',
   SUCCESS: 'ÚSPEŠNÉ',
   FAIL: 'ZLYHANIE',
   QUALITY: 'KVALITA',
-  SCAN: 'Scan',
   STATUS_NAMES: [
     'EMS Telegramy prijaté (Rx)',
     'EMS Čítania (Tx)',
@@ -125,7 +119,6 @@ const sk: Translation = {
   ENUM_FORMAT: 'Enum formát API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Povoliť 1-wire parazitné napájanie DS18B20',
-  LOGGING: 'Logovanie',
   LOG_HEX: 'Záznam telegramov EMS v hexadecimálnej sústave',
   ENABLE_SYSLOG: 'Povoliť Syslog',
   LOG_LEVEL: 'Log úroveň',
@@ -170,7 +163,6 @@ const sk: Translation = {
   CLOSE: 'Zatvoriť',
   USE: 'Použiť',
   FACTORY_RESET: 'Továrenské nastavenia',
-  SYSTEM_FACTORY_TEXT: 'Zariadenie bolo obnovené z výroby a teraz sa reštartuje',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Naozaj chcete resetovať EMS-ESP na predvolené výrobné nastavenia?',
   AVAILABLE_VERSION: 'Najnovšie dostupné verzie',
   STABLE: 'Stabilná',
@@ -255,9 +247,7 @@ const sk: Translation = {
   NETWORK_SCAN: 'Scan WiFi siete',
   IDLE: 'Nečinné',
   LOST: 'Stratené',
-  SCANNING: 'Skenovanie',
   SCAN_AGAIN: 'Skenovať znova',
-  NETWORK_SCANNER: 'Sieťový skener',
   NETWORK_NO_WIFI: 'WiFi siete nenájdené',
   NETWORK_BLANK_BSSID: 'ponechajte prázdne, ak chcete používať iba SSID',
   TX_POWER: 'Tx výkon',
@@ -292,9 +282,6 @@ const sk: Translation = {
   ONCHANGE: 'Pri zmene',
   CONDITION: 'Podmienka',
   SCHEDULE_UPDATED: 'Plánovanie aktualizované',
-  SCHEDULE_TIMER_1: 'pri spustení',
-  SCHEDULE_TIMER_2: 'každú minútu',
-  SCHEDULE_TIMER_3: 'každú hodinu',
   CUSTOM_ENTITIES: 'Vlastné entity',
   ENTITIES_HELP_1: 'Získavanie vlastných entít zo zbernice EMS',
   ENTITIES_UPDATED: 'Aktualizované entity',
@@ -310,9 +297,7 @@ const sk: Translation = {
   ACTIVELOW: 'Aktívny Nízky',
   UNCHANGED: 'Nezmenené',
   ALWAYS: 'Vždy',
-  ACTIVITY: 'Aktivita',
   CONFIGURE: 'Konfigurácia {0}',
-  SYSTEM_MEMORY: 'Systémová pamäť',
   APPLICATION_SETTINGS_1: 'Zmeniť nastavenia aplikácie EMS-ESP',
   SECURITY_1: 'Pridať, alebo odstrániť používateľov',
   DOWNLOAD_UPLOAD_1: 'Stiahnuť a nahrať nastavenia a firmware',
@@ -324,7 +309,6 @@ const sk: Translation = {
   RENAME: 'Premenovať',
   ENABLE_MODBUS: 'Povoliť Modbus',
   VIEW_LOG: 'Zobrazte log na diagnostiku problémov',
-  UPLOAD_DRAG: 'presuňte sem súbor alebo ho kliknutím vyberte',
   SERVICES: 'Služby',
   ALLVALUES: 'Všetky hodnoty',
   SPECIAL_FUNCTIONS: 'Špeciálne funkcie',
@@ -352,7 +336,6 @@ const sk: Translation = {
   RELEASE_TYPE: 'Typ vydania',
   SWITCH_RELEASE_TYPE: 'Prepnúť na {0} verziu',
   FIRMWARE_VERSION_INFO: 'Informácie o verzii firmware',
-  NO_DATA: 'Žiadne dáta',
   USER_PROFILE: 'Profil používateľa',
   STORED_VERSIONS: 'Uložené verzie',
   ONLINE_HELP: 'online pomoc',
@@ -363,7 +346,6 @@ const sk: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email bol úspešne odoslaný',
   SYSTEM_NAME: 'Názov systému',
   COMMANDS: 'Príkazy',
-  COMMANDS_UPDATED: 'Príkazy aktualizované',
   COMMANDS_HELP_1: 'Definujte vlastné príkazy pre magistrali EMS',
   COMMAND_SENT: 'Príkaz odoslaný',
   RUN: 'Volať príkaz',

interface/src/i18n/sv/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const sv: Translation = {
   LANGUAGE: 'Språk',
   RETRY: 'Försök igen',
-  LOADING: 'Laddar',
   IS_REQUIRED: '{0} Krävs',
   SIGN_IN: 'Logga in',
   SIGN_OUT: 'Logga ut',
@@ -50,8 +49,6 @@ const sv: Translation = {
   SETTINGS: 'Inställningar',
   UPDATED_OF: '{0} Uppdaterad',
   UPDATE_OF: '{0} Uppdatera',
-  REMOVED_OF: '{0} Raderad',
-  DELETION_OF: '{0} Radering',
   OFFSET: 'Offset',
   FACTOR: 'Faktor',
   FREQ: 'Frekvens',
@@ -64,17 +61,14 @@ const sv: Translation = {
   TEMP_SENSORS: 'Temperatursensorer',
   WRITE_CMD_SENT: 'Skrivkommandon skickade',
   EMS_BUS_WARNING: 'EMS-buss nedkopplad. Om denna varning kvarstår efter några sekunder, kontrollera inställningar och enhets-profil.',
-  EMS_BUS_SCANNING: 'Söker efter EMS-enheter...',
   CONNECTED: 'Ansluten',
   TX_ISSUES: 'Sändfel - Prova ett annat TX-läge',
   DISCONNECTED: 'Nedkopplad',
-  EMS_SCAN: 'Är du säker på att du vill starta en full genomsökning av EMS-bussen?',
   DATA_TRAFFIC: 'Datatrafik',
   EMS_DEVICE: 'EMS enhet',
   SUCCESS: 'Lyckades',
   FAIL: 'Misslyckades',
   QUALITY: 'Kvalitet',
-  SCAN: 'Sök',
   STATUS_NAMES: [
     'EMS-telegram (Rx)',
     'EMS-läsningar (Tx)',
@@ -125,7 +119,6 @@ const sv: Translation = {
   ENUM_FORMAT: 'Enum-format API/MQTT',
   INDEX: 'Index',
   ENABLE_PARASITE: 'Aktivera 1-wire parasitström',
-  LOGGING: 'Loggning',
   LOG_HEX: 'Logga EMS-telegram i hexadecimalformat',
   ENABLE_SYSLOG: 'Aktivera Syslog',
   LOG_LEVEL: 'Loggnivå',
@@ -170,7 +163,6 @@ const sv: Translation = {
   CLOSE: 'Stäng',
   USE: 'Använd',
   FACTORY_RESET: 'Fabriksåterställning',
-  SYSTEM_FACTORY_TEXT: 'Enheten har blivit fabriksåterställd och startar nu om',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Är du säker på att du vill fabriksåterställa enheten?',
   AVAILABLE_VERSION: 'Senaste tillgängliga versioner',
   STABLE: 'Stabil',
@@ -255,9 +247,7 @@ const sv: Translation = {
   NETWORK_SCAN: 'Sök efter WiFi-nätverk',
   IDLE: 'Vilande',
   LOST: 'Förlorad',
-  SCANNING: 'Söker',
   SCAN_AGAIN: 'Sök igen',
-  NETWORK_SCANNER: 'Hittade nätverk',
   NETWORK_NO_WIFI: 'Inga WiFi-nätverk hittades',
   NETWORK_BLANK_BSSID: 'lämna blankt för att bara använda SSID',
   TX_POWER: 'Tx effekt',
@@ -292,9 +282,6 @@ const sv: Translation = {
   ONCHANGE: 'Vid förändring',
   CONDITION: 'Villkor',
   SCHEDULE_UPDATED: 'Schema uppdaterat',
-  SCHEDULE_TIMER_1: 'vid uppstart',
-  SCHEDULE_TIMER_2: 'varje minut',
-  SCHEDULE_TIMER_3: 'varje timme',
   CUSTOM_ENTITIES: 'Anpassade entiteter',
   ENTITIES_HELP_1: 'Hämta anpassade entiteter från EMS bussen',
   ENTITIES_UPDATED: 'Entiteter uppdaterade',
@@ -310,9 +297,7 @@ const sv: Translation = {
   ACTIVELOW: 'Aktivt låg',
   UNCHANGED: 'Oändrad',
   ALWAYS: 'Alltid',
-  ACTIVITY: 'Aktivitet',
   CONFIGURE: 'Konfigurera {0}',
-  SYSTEM_MEMORY: 'Systemminne',
   APPLICATION_SETTINGS_1: 'Ändra EMS-ESP Applikationsinställningar',
   SECURITY_1: 'Lägg till eller ta bort användare',
   DOWNLOAD_UPLOAD_1: 'Ladda ner eller ladda upp inställningar och firmware',
@@ -324,7 +309,6 @@ const sv: Translation = {
   RENAME: 'Byt namn',
   ENABLE_MODBUS: 'Aktivera Modbus',
   VIEW_LOG: 'Titta i loggen för att felsöka problem',
-  UPLOAD_DRAG: 'dra och släpp en fil här eller klicka för att välja en',
   SERVICES: 'Tjänster',
   ALLVALUES: 'Alla värden',
   SPECIAL_FUNCTIONS: 'Specialfunktioner',
@@ -352,7 +336,6 @@ const sv: Translation = {
   RELEASE_TYPE: 'Utgivelsestyp',
   SWITCH_RELEASE_TYPE: 'Byt till {0} utgåva',
   FIRMWARE_VERSION_INFO: 'Information om firmwareversion',
-  NO_DATA: 'Ingen data',
   USER_PROFILE: 'Användarprofil',
   STORED_VERSIONS: 'Lagrad versioner',
   ONLINE_HELP: 'online hjälp',
@@ -363,7 +346,6 @@ const sv: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email skickad lyckades',
   SYSTEM_NAME: 'Systemnamn',
   COMMANDS: 'Kommandon',
-  COMMANDS_UPDATED: 'Kommandon uppdaterade',
   COMMANDS_HELP_1: 'Definiera egna kommandon för EMS-Magistral',
   COMMAND_SENT: 'Kommando skickat',
   RUN: 'Kör kommando',

interface/src/i18n/tr/index.ts

@@ -3,7 +3,6 @@ import type { Translation } from '../i18n-types';
 const tr: Translation = {
   LANGUAGE: 'Dil',
   RETRY: 'Tekrar Dene',
-  LOADING: 'Yükleniyor',
   IS_REQUIRED: '{0} gerekiyor',
   SIGN_IN: 'Giriş Yap',
   SIGN_OUT: 'Çıkış Yap',
@@ -50,8 +49,6 @@ const tr: Translation = {
   SETTINGS: 'Ayarlar',
   UPDATED_OF: '{0} Güncellendi',
   UPDATE_OF: '{0} Güncelleme',
-  REMOVED_OF: '{0} Kaldırıldı',
-  DELETION_OF: '{0} Silindi',
   OFFSET: 'Fark',
   FACTOR: 'Etmen',
   FREQ: 'Frekans',
@@ -64,17 +61,14 @@ const tr: Translation = {
   TEMP_SENSORS: 'Sıcaklık Sensörleri',
   WRITE_CMD_SENT: 'Yazma komutu gönderildi',
   EMS_BUS_WARNING: 'EMS hat bağlantısı kesildi. Eğer bu uyarı birkaç saniye sonra devam ediyorsa lütfen ayarları ve kart tipini kontrol edin',
-  EMS_BUS_SCANNING: 'EMS cihazları aranıyor...',
   CONNECTED: 'Bağlandı',
   TX_ISSUES: 'Tx sorunu - başka bir Tx Modu deneyin',
   DISCONNECTED: 'Bağlantı kesildi',
-  EMS_SCAN: 'EMS Hattında tam bir cihaz taraması başlatmak istediğinizden emin misiniz?',
   DATA_TRAFFIC: 'Veri trafiği',
   EMS_DEVICE: 'EMS Cihazı',
   SUCCESS: 'BAŞARILI',
   FAIL: 'HATA',
   QUALITY: 'KALİTE',
-  SCAN: 'Tara',
   STATUS_NAMES: [
     'EMS Telegramlar Alındı (Rx)',
     'EMS Okuması (Tx)',
@@ -125,7 +119,6 @@ const tr: Translation = {
   ENUM_FORMAT: 'Enum Biçimleme API/MQTT',
   INDEX: 'İndeks',
   ENABLE_PARASITE: '1-wire parazit gücü devreye al',
-  LOGGING: 'Kayıt ediliyor',
   LOG_HEX: 'EMS telegramlarını hexadecimal olarak kayıt et',
   ENABLE_SYSLOG: 'Sistem Kaydını Devreye Al',
   LOG_LEVEL: 'Kayıt Seviyesi',
@@ -170,7 +163,6 @@ const tr: Translation = {
   CLOSE: 'Kapat',
   USE: 'KUllan',
   FACTORY_RESET: 'Fabrika ayarına dönme',
-  SYSTEM_FACTORY_TEXT: 'Cihaz fabrika ayarlarına döndü ve şimdi yendiden başlatılacak',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Cihazı fabrika ayarlarına döndürmek istediğinize emin misiniz?',
   AVAILABLE_VERSION: 'En son kullanılabilir sürümler',
   STABLE: 'Kararlı',
@@ -255,9 +247,7 @@ const tr: Translation = {
   NETWORK_SCAN: 'Kablosuz Ağları Tara',
   IDLE: 'Serbest',
   LOST: 'Kayıp',
-  SCANNING: 'Tarıyor',
   SCAN_AGAIN: 'Tekrar tara',
-  NETWORK_SCANNER: 'Ağ Tarayıcısı',
   NETWORK_NO_WIFI: 'Hiçbir Kablosuz Ağ bulunamadı',
   NETWORK_BLANK_BSSID: 'sadece SSID kullanmak için boş bırakın',
   TX_POWER: 'Aktarım gücü',
@@ -292,9 +282,6 @@ const tr: Translation = {
   ONCHANGE: 'Değişimde',
   CONDITION: 'Durum',
   SCHEDULE_UPDATED: 'Zamanlama güncellendi',
-  SCHEDULE_TIMER_1: 'Başlangıçta',
-  SCHEDULE_TIMER_2: 'her dakikada',
-  SCHEDULE_TIMER_3: 'her saatte',
   CUSTOM_ENTITIES: 'Özel Varlıklar',
   ENTITIES_HELP_1: 'Özel varlıkları EMS hattından alın',
   ENTITIES_UPDATED: 'Varlıklar güncellendi',
@@ -310,9 +297,7 @@ const tr: Translation = {
   ACTIVELOW: 'Aktif Düşük',
   UNCHANGED: 'Değiştirilmedi',
   ALWAYS: 'Her zaman',
-  ACTIVITY: 'Faaliyet',
   CONFIGURE: 'Yapılandır {0}',
-  SYSTEM_MEMORY: 'Sistem Belleği',
   APPLICATION_SETTINGS_1: 'EMS-ESP Uygulama Ayarlarını Değiştir',
   SECURITY_1: 'Kullanıcıları ekle veya kaldır',
   DOWNLOAD_UPLOAD_1: 'Ayarları ve firmware dosyasını indir ve yükle',
@@ -324,7 +309,6 @@ const tr: Translation = {
   RENAME: 'Yeniden Adlandır',
   ENABLE_MODBUS: 'Modbus\'ı etkinleştir',
   VIEW_LOG: 'Sorunu tanımlamak için günlüğü görüntüleyin',
-  UPLOAD_DRAG: 'Bir dosya buraya sürükleyip bırakın veya seçmek için tıklayın',
   SERVICES: 'Hizmetler',
   ALLVALUES: 'Tüm Değerler',
   SPECIAL_FUNCTIONS: 'Özel Fonksiyonlar',
@@ -352,7 +336,6 @@ const tr: Translation = {
   RELEASE_TYPE: 'Sürüm Tipi',
   SWITCH_RELEASE_TYPE: '{0} sürümüne geç',
   FIRMWARE_VERSION_INFO: 'Firmware Sürüm Bilgisi',
-  NO_DATA: 'Hiçbir veri yok',
   USER_PROFILE: 'Kullanıcı Profili',
   STORED_VERSIONS: 'Kaydedilmiş Sürümler',
   ONLINE_HELP: 'online yardım',
@@ -363,7 +346,6 @@ const tr: Translation = {
   TEST_EMAIL_SUCCESSFUL: 'Test email başarıyla gönderildi',
   SYSTEM_NAME: 'Sistem Adı',
   COMMANDS: 'Komutlar',
-  COMMANDS_UPDATED: 'Komutlar güncellendi',
   COMMANDS_HELP_1: 'Özel komutları EMS hattına tanımlayın',
   COMMAND_SENT: 'Komut gönderildi',
   RUN: 'Komutu çalıştır',