formatting

src/core/console.cpp

@@ -108,7 +108,6 @@ static void setup_commands(std::shared_ptr<Commands> const & commands) {
             return std::vector<std::string>{"system", "users", "devices", "log", "ems", "values", "mqtt", "commands"};
         });
 
-
     //
     // System commands
     //
@@ -294,7 +293,6 @@ static void setup_commands(std::shared_ptr<Commands> const & commands) {
                               EMSESP::network_.reconnect();
                           });
 
-
     commands->add_command(ShellContext::MAIN,
                           CommandFlags::ADMIN,
                           string_vector{F_(set), F_(board_profile)},

src/core/emsdevicevalue.cpp

@@ -237,7 +237,6 @@ const char * const DeviceValue::DeviceValueTAG_mqtt[] = {
     FL_(tag_src15)[0],       // "src15"
     FL_(tag_src16)[0]        // "src16"
 
-
 };
 
 // count #tags once at compile time

src/core/helpers.cpp

@@ -1042,5 +1042,4 @@ int16_t Helpers::calc_dew(int16_t temp, uint8_t humi) {
     return dt;
 }
 
-
 } // namespace emsesp

src/core/modbus.cpp

@@ -238,7 +238,6 @@ ModbusMessage Modbus::handleRead(const ModbusMessage & request) {
                                                key,
                                                [](const EntityModbusInfo & a, const EntityModbusInfoKey & b) { return a.isLessThan(b); });
 
-
     if (modbusInfo == std::end(modbus_register_mappings) || !modbusInfo->equals(key)) {
         // combination of device_type/tag_type/register_offset does not exist
         LOG_ERROR("combination of device_type/tag_type/register_offset does not exist");
@@ -324,7 +323,6 @@ ModbusMessage Modbus::handleWrite(const ModbusMessage & request) {
 
     LOG_DEBUG("Tag %d, offset %d", tag, register_offset);
 
-
     // binary search in modbus infos
     auto key        = EntityModbusInfoKey(device_type, tag_type, register_offset);
     auto modbusInfo = std::lower_bound(std::begin(modbus_register_mappings),

src/devices/boiler.cpp

@@ -1143,7 +1143,6 @@ Boiler::Boiler(uint8_t device_type, int8_t device_id, uint8_t product_id, const
     EMSESP::send_read_request(0xC2, device_id, 0, 20); // read last errorcode on start (not broadcasted)
     EMSESP::send_read_request(0xC6, device_id, 0, 21); // read last errorcode on start (not broadcasted)
 
-
     if (!isHeatPump() && model() != EMSdevice::EMS_DEVICE_FLAG_HIU) {
         register_telegram_type(0x04, "UBAFactory", true, MAKE_PF_CB(process_UBAFactory), 21);
         register_device_value(DeviceValueTAG::TAG_DEVICE_DATA, &nomPower_, DeviceValueType::UINT8, FL_(nomPower), DeviceValueUOM::KW, MAKE_CF_CB(set_nomPower));
@@ -2443,7 +2442,6 @@ bool Boiler::set_ww_temp(const char * value, const int8_t id) {
     return true;
 }
 
-
 // Set the lower dhw temperature 0xEA
 bool Boiler::set_ww_temp_low(const char * value, const int8_t id) {
     int v;

src/devices/extension.cpp

@@ -66,7 +66,6 @@ Extension::Extension(uint8_t device_type, uint8_t device_id, uint8_t product_id,
     // register_device_value(DeviceValueTAG::TAG_DEVICE_DATA, &errorState_, DeviceValueType::BOOL, FL_(error), DeviceValueUOM::NONE);
 }
 
-
 // extension(0x15) -W-> Me(0x0B), EM100SetMessage(0x0935), data: 00 00 64 50 14
 // need to be fetched
 void Extension::process_EM100SetMessage(const std::shared_ptr<const Telegram> & telegram) {

src/devices/extension.h

@@ -40,7 +40,6 @@ class Extension : public EMSdevice {
     bool set_minT(const char * value, const int8_t id);
     bool set_maxT(const char * value, const int8_t id);
 
-
     int16_t headerTemp_; // T0
     uint8_t input_;      // IO1
     // uint8_t errorState_; // OE1

src/devices/heatsource.h

@@ -81,7 +81,6 @@ class Heatsource : public EMSdevice {
     void process_amCommandMessage(const std::shared_ptr<const Telegram> & telegram);
     void process_amExtraMessage(const std::shared_ptr<const Telegram> & telegram);
 
-
     bool set_vr2Config(const char * value, const int8_t id);     // pos 12: off(00)/Keelbypass(01)/(hc1pump(02) only standalone)
     bool set_ahsActivated(const char * value, const int8_t id);  // pos 00: Alternate heat source activation: No(00),Yes(01)
     bool set_aPumpConfig(const char * value, const int8_t id);   // pos 04: Buffer primary pump->Config pump: No(00),Yes(01)

src/devices/solar.h

@@ -115,7 +115,6 @@ class Solar : public EMSdevice {
     // telegram 0x361 Differential control
     uint8_t diffControl_; // is *10
 
-
     // telegram 0x380
     uint8_t  climateZone_;    // climate zone identifier
     uint16_t collector1Area_; // Area of collector field 1

src/devices/thermostat.cpp

@@ -3012,7 +3012,6 @@ bool Thermostat::set_R3000Holiday(const char * value, const int8_t id) {
     return true;
 }
 
-
 // set pause in hours
 bool Thermostat::set_pause(const char * value, const int8_t id) {
     auto hc = heating_circuit(id);
@@ -3668,7 +3667,6 @@ bool Thermostat::set_reducemode(const char * value, const int8_t id) {
     return false;
 }
 
-
 // sets the thermostat reducemode for RC35 vacations
 bool Thermostat::set_vacreducemode(const char * value, const int8_t id) {
     auto hc = heating_circuit(id);
@@ -3983,7 +3981,6 @@ bool Thermostat::set_wwSwitchTime(const char * value, const int8_t id) {
     }
     char out[sizeof(dhw->wwSwitchTime_)] = {'\0'};
 
-
     if (set_switchtime(value, 0x38, out, sizeof(out))) {
         if (strlen(out)) {
             has_update(dhw->wwSwitchTime_, out, sizeof(dhw->wwSwitchTime_));

src/devices/water.cpp

@@ -233,7 +233,6 @@ void Water::process_IPMParameterWW(const std::shared_ptr<const Telegram> & teleg
     // has_bitupdate(telegram, wwChargeType_, 10, 0); // 0 = charge pump, 0xff = 3-way valve
 }
 
-
 // 0x1E, only16 bit temperature
 // Mixer(0x41) -> Boiler(0x08), HydrTemp(0x1E), data: 01 D8
 void Water::process_IPMHydrTemp(const std::shared_ptr<const Telegram> & telegram) {
@@ -399,7 +398,6 @@ bool Water::set_wwRequiredTemp(const char * value, const int8_t id) {
     return false;
 }
 
-
 bool Water::set_wwFlowTempOffset(const char * value, const int8_t id) {
     int n;
     if (!Helpers::value2number(value, n)) {

src/devices/water.h

@@ -81,7 +81,6 @@ class Water : public EMSdevice {
     int8_t   wwHystOff_;        // Hyst off (default -1)
     uint8_t  wwFlowTempOffset_; // default 40
 
-
     void process_SM100wwTemperature(const std::shared_ptr<const Telegram> & telegram);
     void process_SM100wwStatus(const std::shared_ptr<const Telegram> & telegram);
     void process_SM100wwStatus2(const std::shared_ptr<const Telegram> & telegram);
@@ -100,7 +99,6 @@ class Water : public EMSdevice {
     void process_IPMHydrTemp(const std::shared_ptr<const Telegram> & telegram);
     void process_IPMParameterWW(const std::shared_ptr<const Telegram> & telegram);
 
-
     bool set_wwSelTemp(const char * value, const int8_t id);
     bool set_wwMaxTemp(const char * value, const int8_t id);
     bool set_wwRedTemp(const char * value, const int8_t id);

src/test/test.cpp

@@ -77,7 +77,6 @@ bool Test::test(const std::string & cmd, int8_t id1, int8_t id2) {
         return true;
     }
 
-
 //
 // the tests take a lot of memory when built for the ESP32
 // so only including the full set in standalone, otherwise a limited selection of basic tests
@@ -665,7 +664,6 @@ void Test::run_test(uuid::console::Shell & shell, const std::string & cmd, const
         EMSESP::webAPIService.webAPIService(&request);
         Serial.println();
 
-
         request.url("/api/thermostat/hc2/entities");
         EMSESP::webAPIService.webAPIService(&request);
         Serial.println();

src/uart/emsuart_esp32.h

@@ -16,7 +16,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 /*
  * ESP32 UART port by @ArwedL and improved by @MichaelDvP. See https://github.com/emsesp/EMS-ESP/issues/380
  */