fix removing old HA config topics

CHANGELOG_LATEST.md

@@ -46,6 +46,7 @@
 - Improved API. Restful HTTP API works in the same way as MQTT calls
 - Removed settings for MQTT subscribe format [#173](https://github.com/emsesp/EMS-ESP32/issues/173)
 - Improve Nefit Moduline 200 functionality [#183](https://github.com/emsesp/EMS-ESP32/issues/183)
+- `status` in the MQTT heartbeat renamed to `bus_status`
 
 ## **BREAKING CHANGES**
 
@@ -55,3 +56,5 @@
 - HA: # removed from counts in MQTT Fails, Rx fails, Rx received, Tx fails, Tx reads & Tx writes
 - `txread` renamed to `txreads` and `txwrite` renamed to `txwrites` in MQTT heartbeat payload
 - 'dallas sensors' in api/system/info moved to the "System" section. Renamed "uptime (seconds)" and "reset reason"
+- `status` in the MQTT heartbeat renamed to `bus_status`
+

src/locale_EN.h

@@ -370,7 +370,7 @@ MAKE_PSTR_LIST(enum_progMode4, F("prog_a"), F("prog_b"), F("prog_c"), F("prog_d"
 MAKE_PSTR_LIST(enum_solarmode, F_(constant), F("pwm"), F("analog"))
 MAKE_PSTR_LIST(enum_collectortype, F("flat"), F("vacuum"))
 
-// MQTT topics and full text for values and commands
+// MQTT topic for homeassistant. Must include /
 MAKE_PSTR(homeassistant, "homeassistant/")
 
 // id used to store the device ID. empty full name so only gets displayed in the MQTT payload

src/mqtt.cpp

@@ -545,7 +545,7 @@ void Mqtt::on_connect() {
     }
 
     // send initial MQTT messages for some of our services
-    EMSESP::shower_.send_mqtt_stat(false); // Send shower_activated as false
+    EMSESP::shower_.set_shower_state(false, true); // Send shower_activated as false
     EMSESP::system_.send_heartbeat();              // send heatbeat
 
     // re-subscribe to all custom registered MQTT topics
@@ -749,7 +749,7 @@ void Mqtt::publish_ha(const std::string & topic) {
     LOG_DEBUG(F("[DEBUG] Publishing empty HA topic=%s"), fulltopic.c_str());
 #endif
 
-    publish(topic); // call it immediately, don't queue it
+    publish(fulltopic); // call it immediately, don't queue it
 }
 
 // publish a Home Assistant config topic and payload, with retain flag off.
@@ -758,9 +758,6 @@ void Mqtt::publish_ha(const std::string & topic, const JsonObject & payload) {
         return;
     }
 
-    // empty payload will remove the previous config
-    // publish(topic);
-
     std::string payload_text;
     payload_text.reserve(measureJson(payload) + 1);
     serializeJson(payload, payload_text); // convert json to string
@@ -908,7 +905,7 @@ void Mqtt::publish_ha_sensor_config(uint8_t                     type, // EMSdevi
     // if we're asking to remove this topic, send an empty payload
     // https://github.com/emsesp/EMS-ESP32/issues/196
     if (remove) {
-        LOG_WARNING(F("Device value %s gone silent. Removing HA config topic %s"), uniq.c_str(), topic);
+        LOG_WARNING(F("Lost device value for %s. Removing HA config"), uniq.c_str());
         publish_ha(topic);
         return;
     }

src/test/test.cpp

@@ -30,7 +30,7 @@ bool Test::run_test(const char * command, int8_t id) {
     }
 
     if (strcmp(command, "general") == 0) {
-        EMSESP::logger().info(F("Testing general..."));
+        EMSESP::logger().info(F("Testing general. Adding a Boiler and Thermostat"));
 
         add_device(0x08, 123); // Nefit Trendline
         add_device(0x18, 157); // Bosch CR100
@@ -54,7 +54,7 @@ bool Test::run_test(const char * command, int8_t id) {
     }
 
     if (strcmp(command, "310") == 0) {
-        EMSESP::logger().info(F("Testing GB072/RC310..."));
+        EMSESP::logger().info(F("Adding a GB072/RC310 combo..."));
 
         add_device(0x08, 123); // GB072
         add_device(0x10, 158); // RC310
@@ -81,7 +81,7 @@ bool Test::run_test(const char * command, int8_t id) {
     }
 
     if (strcmp(command, "gateway") == 0) {
-        EMSESP::logger().info(F("Testing gateway..."));
+        EMSESP::logger().info(F("Adding a Gateway..."));
 
         // add 0x48 KM200, via a version command
         rx_telegram({0x48, 0x0B, 0x02, 0x00, 0xBD, 0x04, 0x06, 00, 00, 00, 00, 00, 00, 00});
@@ -101,7 +101,7 @@ bool Test::run_test(const char * command, int8_t id) {
     }
 
     if (strcmp(command, "mixer") == 0) {
-        EMSESP::logger().info(F("Testing mixer..."));
+        EMSESP::logger().info(F("Adding a mixer..."));
 
         // add controller
         add_device(0x09, 114);
@@ -123,7 +123,7 @@ bool Test::run_test(const char * command, int8_t id) {
     }
 
     if (strcmp(command, "boiler") == 0) {
-        EMSESP::logger().info(F("Testing boiler..."));
+        EMSESP::logger().info(F("Adding boiler..."));
         add_device(0x08, 123); // Nefit Trendline
 
         // UBAuptime
@@ -140,7 +140,7 @@ bool Test::run_test(const char * command, int8_t id) {
     }
 
     if (strcmp(command, "thermostat") == 0) {
-        EMSESP::logger().info(F("Testing thermostat..."));
+        EMSESP::logger().info(F("Adding thermostat..."));
 
         add_device(0x10, 192); // FW120
 
@@ -153,7 +153,7 @@ bool Test::run_test(const char * command, int8_t id) {
     }
 
     if (strcmp(command, "solar") == 0) {
-        EMSESP::logger().info(F("Testing solar..."));
+        EMSESP::logger().info(F("Adding solar..."));
 
         add_device(0x30, 163); // SM100
 
@@ -172,7 +172,7 @@ bool Test::run_test(const char * command, int8_t id) {
     }
 
     if (strcmp(command, "heatpump") == 0) {
-        EMSESP::logger().info(F("Testing heatpump..."));
+        EMSESP::logger().info(F("Adding heatpump..."));
 
         add_device(0x38, 200); // Enviline module
         add_device(0x10, 192); // FW120 thermostat
@@ -187,7 +187,8 @@ bool Test::run_test(const char * command, int8_t id) {
     return false;
 }
 
-// used with the 'test' command, under su/admin
+// These next tests are run from the Console
+// using the test command
 void Test::run_test(uuid::console::Shell & shell, const std::string & cmd) {
     // switch to su
     shell.add_flags(CommandFlags::ADMIN);
@@ -475,29 +476,27 @@ void Test::run_test(uuid::console::Shell & shell, const std::string & cmd) {
         shell.printfln(F("Testing device value rendering"));
 
         Mqtt::ha_enabled(true);
-        // Mqtt::ha_enabled(false);
-
         Mqtt::nested_format(1);
         Mqtt::send_response(false);
 
         run_test("boiler");
         run_test("thermostat");
 
-        // shell.invoke_command("show");
-
         // change a value to null/bogus/dormant
-        // homeassistant/sensor/ems-esp/boiler_wwseltemp/config
         shell.invoke_command("call boiler wwseltemp");
         shell.invoke_command("call system publish");
+    }
+
+    if (command == "dv2") {
+        shell.printfln(F("Testing device value lost"));
 
         // Boiler -> Me, UBAParameterWW(0x33)
         // wwseltemp = goes from 52 degrees (0x34) to void (0xFF)
+        // it should delete the HA config topic homeassistant/sensor/ems-esp/boiler_wwseltemp/config
         uart_telegram({0x08, 0x0B, 0x33, 0x00, 0x08, 0xFF, 0xFF, 0xFB, 0x00, 0x28, 0x00, 0x00, 0x46, 0x00, 0xFF, 0xFF, 0x00});
 
         shell.invoke_command("call boiler wwseltemp");
         shell.invoke_command("call system publish");
-
-        // shell.invoke_command("show mqtt");
     }
 
     if (command == "api") {

src/version.h

@@ -1 +1 @@
-#define EMSESP_APP_VERSION "3.3.0b8"
+#define EMSESP_APP_VERSION "3.3.0b9"