mirror of
https://github.com/emsesp/EMS-ESP32.git
synced 2025-12-09 01:09:51 +03:00
add #1609 dhw energy meter and some thermostat junkers settings
This commit is contained in:
MichaelDvP
@@ -410,6 +410,12 @@ Boiler::Boiler(uint8_t device_type, int8_t device_id, uint8_t product_id, const
|
||||
DeviceValueNumOp::DV_NUMOP_DIV100,
|
||||
FL_(meterEHeat),
|
||||
DeviceValueUOM::KWH);
|
||||
register_device_value(DeviceValueTAG::TAG_BOILER_DATA_WW,
|
||||
&meterWw_,
|
||||
DeviceValueType::ULONG,
|
||||
DeviceValueNumOp::DV_NUMOP_DIV100,
|
||||
FL_(meterWw),
|
||||
DeviceValueUOM::KWH);
|
||||
register_device_value(DeviceValueTAG::TAG_DEVICE_DATA,
|
||||
&meterHeat_,
|
||||
DeviceValueType::ULONG,
|
||||
@@ -1971,6 +1977,7 @@ void Boiler::process_HpMeters(std::shared_ptr<const Telegram> telegram) {
|
||||
has_update(telegram, meterComp_, 4);
|
||||
has_update(telegram, meterEHeat_, 8);
|
||||
has_update(telegram, meterHeat_, 24);
|
||||
has_update(telegram, meterWw_, 32);
|
||||
}
|
||||
|
||||
void Boiler::process_HpPressure(std::shared_ptr<const Telegram> telegram) {
|
||||
|
||||
@@ -221,6 +221,7 @@ class Boiler : public EMSdevice {
|
||||
uint32_t meterComp_;
|
||||
uint32_t meterEHeat_;
|
||||
uint32_t meterHeat_;
|
||||
uint32_t meterWw_;
|
||||
uint8_t hpEA0_;
|
||||
uint8_t hpPumpMode_;
|
||||
uint8_t hpSetDiffPress_;
|
||||
|
||||
@@ -751,28 +751,46 @@ void Thermostat::process_JunkersSet(std::shared_ptr<const Telegram> telegram) {
|
||||
if (hc == nullptr) {
|
||||
return;
|
||||
}
|
||||
|
||||
has_update(telegram, hc->daytemp, 17); // is * 2
|
||||
has_update(telegram, hc->nighttemp, 16); // is * 2
|
||||
has_update(telegram, hc->nofrosttemp, 15); // is * 2
|
||||
has_update(telegram, hc->controlmode, 0); // 0-off, 1-unmixed-no-IPM, 2-unmixed-IPM, 3-mixed
|
||||
has_update(telegram, hc->control, 1); // remote: 0-off, 1-FB10, 2-FB100
|
||||
has_enumupdate(telegram, hc->program, 13, 1); // 1-6: 1 = A, 2 = B,...
|
||||
has_enumupdate(telegram, hc->mode, 14, 1); // 0 = nofrost, 1 = eco, 2 = heat, 3 = auto
|
||||
has_update(telegram, hc->heatingtype, 2); // 0-off, 1-curve, 2-radiator, 3-convector, 4-floor
|
||||
has_update(telegram, hc->minflowtemp, 3); // degrees
|
||||
has_update(telegram, hc->designtemp, 4); // degrees
|
||||
has_update(telegram, hc->maxflowtemp, 5); // degrees
|
||||
has_update(telegram, hc->roominfl_factor, 6); // %
|
||||
has_update(telegram, hc->roominfluence, 7); // 0-off, 1-ext, 2-int, 3-auto
|
||||
has_update(telegram, hc->offsettemp, 8); // 0-off, 0xFF-on
|
||||
has_enumupdate(telegram, hc->roomsensor, 9, 1); // 1-intern, 2-extern, 3-autoselect the lower value
|
||||
has_update(telegram, hc->nofrostmode, 10); // 0-off, 0xFF-on
|
||||
has_update(telegram, hc->summertemp, 11); // degrees
|
||||
// 12 Frostgrenztemperatur für Heizkeis (*2)?
|
||||
has_enumupdate(telegram, hc->program, 13, 1); // 1-6: 1 = A, 2 = B,...
|
||||
has_enumupdate(telegram, hc->mode, 14, 1); // 0 = nofrost, 1 = eco, 2 = heat, 3 = auto
|
||||
has_update(telegram, hc->nofrosttemp, 15); // is * 2
|
||||
has_update(telegram, hc->nighttemp, 16); // is * 2
|
||||
has_update(telegram, hc->daytemp, 17); // is * 2
|
||||
has_enumupdate(telegram, hc->fastHeatup, 18, 1); // slow, normal, fast
|
||||
has_enumupdate(telegram, hc->holidaymode, 19, 1); // as mode: nofrost, eco, heat, auto
|
||||
}
|
||||
|
||||
// type 0x0179, ff
|
||||
// type 0x0179, ff for Junkers_OLD
|
||||
void Thermostat::process_JunkersSet2(std::shared_ptr<const Telegram> telegram) {
|
||||
std::shared_ptr<Thermostat::HeatingCircuit> hc = heating_circuit(telegram);
|
||||
if (hc == nullptr) {
|
||||
return;
|
||||
}
|
||||
|
||||
has_update(telegram, hc->daytemp, 7); // is * 2
|
||||
has_update(telegram, hc->nighttemp, 6); // is * 2
|
||||
has_update(telegram, hc->nofrosttemp, 5); // is * 2
|
||||
has_enumupdate(telegram, hc->program, 10, 1); // 1-6: 1 = A, 2 = B,...
|
||||
has_enumupdate(telegram, hc->mode, 4, 1); // 0 = nofrost, 1 = eco, 2 = heat, 3 = auto
|
||||
has_update(telegram, hc->controlmode, 0); // 0-off, 1-unmixed-no-IPM, 2-unmixed-IPM, 3-mixed
|
||||
// 1 curve factor roomtemp
|
||||
// 2 curve factor heating
|
||||
has_update(telegram, hc->maxflowtemp, 3); // degrees
|
||||
has_enumupdate(telegram, hc->mode, 4, 1); // 0 = nofrost, 1 = eco, 2 = heat, 3 = auto
|
||||
has_update(telegram, hc->nofrosttemp, 5); // is * 2
|
||||
has_update(telegram, hc->nighttemp, 6); // is * 2
|
||||
has_update(telegram, hc->daytemp, 7); // is * 2
|
||||
has_enumupdate(telegram, hc->holidaymode, 8, 1); // as mode: 1-nofrost, 2-eco, 3-heat, 4-auto
|
||||
has_update(telegram, hc->switchonoptimization, 9); // 0-off, 0xFF-on
|
||||
has_enumupdate(telegram, hc->program, 10, 1); // 1-6: 1 = A, 2 = B,...
|
||||
}
|
||||
|
||||
// type 0x123 - FB10 Junkers remote
|
||||
@@ -1349,6 +1367,8 @@ void Thermostat::process_RC35Set(std::shared_ptr<const Telegram> telegram) {
|
||||
has_update(telegram, hc->offsettemp, 6); // is * 2
|
||||
has_update(telegram, hc->mode, 7); // night, day, auto
|
||||
|
||||
has_update(telegram, hc->switchonoptimization, 19); // 0xFF for on
|
||||
|
||||
has_update(telegram, hc->wwprio, 21); // 0xFF for on
|
||||
has_update(telegram, hc->summertemp, 22); // is * 1
|
||||
has_update(telegram, hc->nofrosttemp, 23); // is * 1
|
||||
@@ -2452,8 +2472,28 @@ bool Thermostat::set_roominfl_factor(const char * value, const int8_t id) {
|
||||
if (!Helpers::value2float(value, val)) {
|
||||
return false;
|
||||
}
|
||||
if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS) {
|
||||
write_command(set_typeids[hc->hc()], 6, (uint8_t)val);
|
||||
|
||||
write_command(summer_typeids[hc->hc()], 1, (uint8_t)(val * 10));
|
||||
} else {
|
||||
write_command(summer_typeids[hc->hc()], 1, (uint8_t)(val * 10));
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
// set Junkers roominfluence mode
|
||||
bool Thermostat::set_roominfl_mode(const char * value, const int8_t id) {
|
||||
uint8_t hc_num = (id == -1) ? AUTO_HEATING_CIRCUIT : id;
|
||||
std::shared_ptr<Thermostat::HeatingCircuit> hc = heating_circuit(hc_num);
|
||||
if (hc == nullptr) {
|
||||
return false;
|
||||
}
|
||||
uint8_t val;
|
||||
if (!Helpers::value2enum(value, val, FL_(enum_roominfluence))) {
|
||||
return false;
|
||||
}
|
||||
write_command(set_typeids[hc->hc()], 7, (uint8_t)val);
|
||||
|
||||
return true;
|
||||
}
|
||||
@@ -2476,8 +2516,8 @@ bool Thermostat::set_mode(const char * value, const int8_t id) {
|
||||
break;
|
||||
case EMSdevice::EMS_DEVICE_FLAG_RC20_N:
|
||||
case EMSdevice::EMS_DEVICE_FLAG_RC25:
|
||||
case EMSdevice::EMS_DEVICE_FLAG_RC35:
|
||||
case EMSdevice::EMS_DEVICE_FLAG_RC30_N:
|
||||
case EMSdevice::EMS_DEVICE_FLAG_RC35:
|
||||
mode_list = FL_(enum_mode3);
|
||||
break;
|
||||
case EMSdevice::EMS_DEVICE_FLAG_BC400:
|
||||
@@ -2701,6 +2741,44 @@ bool Thermostat::set_fastheatup(const char * value, const int8_t id) {
|
||||
return true;
|
||||
}
|
||||
|
||||
// Set holidaymode Junkers
|
||||
bool Thermostat::set_holidaymode(const char * value, const int8_t id) {
|
||||
uint8_t hc_num = (id == -1) ? AUTO_HEATING_CIRCUIT : id;
|
||||
std::shared_ptr<Thermostat::HeatingCircuit> hc = heating_circuit(hc_num);
|
||||
if (hc == nullptr) {
|
||||
return false;
|
||||
}
|
||||
|
||||
uint8_t v;
|
||||
|
||||
if (!Helpers::value2enum(value, v, FL_(enum_mode4))) {
|
||||
return false;
|
||||
}
|
||||
if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS && has_flags(EMSdevice::EMS_DEVICE_FLAG_JUNKERS_OLD)) {
|
||||
write_command(set_typeids[hc->hc()], 8, v + 1, set_typeids[hc->hc()]);
|
||||
} else {
|
||||
write_command(set_typeids[hc->hc()], 19, v + 1, set_typeids[hc->hc()]);
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
// Set heatup mode Junkers
|
||||
bool Thermostat::set_heatup(const char * value, const int8_t id) {
|
||||
uint8_t hc_num = (id == -1) ? AUTO_HEATING_CIRCUIT : id;
|
||||
std::shared_ptr<Thermostat::HeatingCircuit> hc = heating_circuit(hc_num);
|
||||
if (hc == nullptr) {
|
||||
return false;
|
||||
}
|
||||
|
||||
uint8_t v;
|
||||
|
||||
if (!Helpers::value2enum(value, v, FL_(enum_heatup))) {
|
||||
return false;
|
||||
}
|
||||
write_command(set_typeids[hc->hc()], 18, v + 1, set_typeids[hc->hc()]);
|
||||
return true;
|
||||
}
|
||||
|
||||
// Set switchonoptimization RC310
|
||||
bool Thermostat::set_switchonoptimization(const char * value, const int8_t id) {
|
||||
uint8_t hc_num = (id == -1) ? AUTO_HEATING_CIRCUIT : id;
|
||||
@@ -2714,9 +2792,16 @@ bool Thermostat::set_switchonoptimization(const char * value, const int8_t id) {
|
||||
if (!Helpers::value2bool(value, b)) {
|
||||
return false;
|
||||
}
|
||||
write_command(curve_typeids[hc->hc()], 4, b ? 0xFF : 0x00, curve_typeids[hc->hc()]);
|
||||
if (model() == EMSdevice::EMS_DEVICE_FLAG_RC35) {
|
||||
write_command(set_typeids[hc->hc()], 19, b ? 0xFF : 0x00, set_typeids[hc->hc()]);
|
||||
} else if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS && has_flags(EMSdevice::EMS_DEVICE_FLAG_JUNKERS_OLD)) {
|
||||
write_command(set_typeids[hc->hc()], 9, b ? 0xFF : 0x00, set_typeids[hc->hc()]);
|
||||
} else {
|
||||
write_command(curve_typeids[hc->hc()], 4, b ? 0xFF : 0x00, curve_typeids[hc->hc()]);
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
bool Thermostat::set_boost(const char * value, const int8_t id) {
|
||||
uint8_t hc_num = (id == -1) ? AUTO_HEATING_CIRCUIT : id;
|
||||
std::shared_ptr<Thermostat::HeatingCircuit> hc = heating_circuit(hc_num);
|
||||
@@ -2859,6 +2944,10 @@ bool Thermostat::set_heatingtype(const char * value, const int8_t id) {
|
||||
}
|
||||
|
||||
uint8_t set;
|
||||
if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS && Helpers::value2enum(value, set, FL_(enum_heatingtype1))) {
|
||||
write_command(set_typeids[hc->hc()], 0, set, set_typeids[hc->hc()]);
|
||||
return true;
|
||||
}
|
||||
if (Helpers::value2enum(value, set, FL_(enum_heatingtype))) {
|
||||
if ((model() == EMSdevice::EMS_DEVICE_FLAG_RC20_N) || (model() == EMSdevice::EMS_DEVICE_FLAG_RC25)) {
|
||||
write_command(set_typeids[hc->hc()], 0, set, set_typeids[hc->hc()]);
|
||||
@@ -2884,7 +2973,12 @@ bool Thermostat::set_controlmode(const char * value, const int8_t id) {
|
||||
}
|
||||
|
||||
uint8_t set;
|
||||
if (model() == EMSdevice::EMS_DEVICE_FLAG_RC100) {
|
||||
if (model() == EMSdevice::EMS_DEVICE_FLAG_JUNKERS) {
|
||||
if (Helpers::value2enum(value, set, FL_(enum_controlmode3))) {
|
||||
write_command(set_typeids[hc->hc()], 0, set, set_typeids[hc->hc()]);
|
||||
return true;
|
||||
}
|
||||
} else if (model() == EMSdevice::EMS_DEVICE_FLAG_RC100) {
|
||||
if (Helpers::value2enum(value, set, FL_(enum_controlmode))) {
|
||||
write_command(curve_typeids[hc->hc()], 0, set, curve_typeids[hc->hc()]);
|
||||
return true;
|
||||
@@ -3512,6 +3606,21 @@ bool Thermostat::set_temperature(const float temperature, const uint8_t mode, co
|
||||
bool old_junkers = (has_flags(EMSdevice::EMS_DEVICE_FLAG_JUNKERS_OLD));
|
||||
if (!old_junkers) {
|
||||
switch (mode) {
|
||||
case HeatingCircuit::Mode::SUMMER:
|
||||
offset = 11;
|
||||
break;
|
||||
case HeatingCircuit::Mode::MINFLOW:
|
||||
offset = 3;
|
||||
factor = 1;
|
||||
break;
|
||||
case HeatingCircuit::Mode::MAXFLOW:
|
||||
offset = 5;
|
||||
factor = 1;
|
||||
break;
|
||||
case HeatingCircuit::Mode::DESIGN:
|
||||
offset = 4;
|
||||
factor = 1;
|
||||
break;
|
||||
case HeatingCircuit::Mode::NOFROST:
|
||||
offset = EMS_OFFSET_JunkersSetMessage_no_frost_temp;
|
||||
break;
|
||||
@@ -3549,6 +3658,10 @@ bool Thermostat::set_temperature(const float temperature, const uint8_t mode, co
|
||||
} else {
|
||||
// older, like the FR100
|
||||
switch (mode) {
|
||||
case HeatingCircuit::Mode::MAXFLOW:
|
||||
offset = 3;
|
||||
factor = 1;
|
||||
break;
|
||||
case HeatingCircuit::Mode::NOFROST:
|
||||
offset = EMS_OFFSET_JunkersSetMessage2_no_frost_temp;
|
||||
break;
|
||||
@@ -4601,6 +4714,12 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
|
||||
-1,
|
||||
101);
|
||||
register_device_value(tag, &hc->wwprio, DeviceValueType::BOOL, FL_(wwprio), DeviceValueUOM::NONE, MAKE_CF_CB(set_wwprio));
|
||||
register_device_value(tag,
|
||||
&hc->switchonoptimization,
|
||||
DeviceValueType::BOOL,
|
||||
FL_(switchonoptimization),
|
||||
DeviceValueUOM::NONE,
|
||||
MAKE_CF_CB(set_switchonoptimization));
|
||||
register_device_value(
|
||||
tag, &hc->switchtime1, DeviceValueType::STRING, FL_(tpl_switchtime), FL_(switchtime1), DeviceValueUOM::NONE, MAKE_CF_CB(set_switchtime1));
|
||||
register_device_value(
|
||||
@@ -4632,7 +4751,26 @@ void Thermostat::register_device_values_hc(std::shared_ptr<Thermostat::HeatingCi
|
||||
-1,
|
||||
101);
|
||||
register_device_value(tag, &hc->targetflowtemp, DeviceValueType::UINT, FL_(targetflowtemp), DeviceValueUOM::DEGREES);
|
||||
register_device_value(tag, &hc->summertemp, DeviceValueType::UINT, FL_(summertemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_summertemp), 9, 25);
|
||||
register_device_value(tag, &hc->roomsensor, DeviceValueType::ENUM, FL_(enum_roomsensor), FL_(roomsensor), DeviceValueUOM::NONE, MAKE_CF_CB(set_roomsensor));
|
||||
register_device_value(tag, &hc->holidaymode, DeviceValueType::ENUM, FL_(enum_mode4), FL_(holidaymode), DeviceValueUOM::NONE, MAKE_CF_CB(set_holidaymode));
|
||||
register_device_value(tag,
|
||||
&hc->switchonoptimization,
|
||||
DeviceValueType::BOOL,
|
||||
FL_(switchonoptimization),
|
||||
DeviceValueUOM::NONE,
|
||||
MAKE_CF_CB(set_switchonoptimization));
|
||||
register_device_value(tag, &hc->fastHeatup, DeviceValueType::ENUM, FL_(enum_heatup), FL_(heatup), DeviceValueUOM::NONE, MAKE_CF_CB(set_heatup));
|
||||
register_device_value(tag, &hc->minflowtemp, DeviceValueType::UINT, FL_(minflowtemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_minflowtemp), 5, 70);
|
||||
register_device_value(tag, &hc->maxflowtemp, DeviceValueType::UINT, FL_(maxflowtemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_maxflowtemp), 30, 90);
|
||||
register_device_value(tag, &hc->designtemp, DeviceValueType::UINT, FL_(designtemp), DeviceValueUOM::DEGREES, MAKE_CF_CB(set_designtemp), 30, 90);
|
||||
register_device_value(
|
||||
tag, &hc->roominfluence, DeviceValueType::ENUM, FL_(enum_roominfluence), FL_(roominfluence), DeviceValueUOM::NONE, MAKE_CF_CB(set_roominfl_mode));
|
||||
register_device_value(tag, &hc->roominfl_factor, DeviceValueType::UINT, FL_(roominfl_factor), DeviceValueUOM::PERCENT, MAKE_CF_CB(set_roominfl_factor));
|
||||
register_device_value(
|
||||
tag, &hc->heatingtype, DeviceValueType::ENUM, FL_(enum_heatingtype1), FL_(heatingtype), DeviceValueUOM::NONE, MAKE_CF_CB(set_heatingtype));
|
||||
register_device_value(
|
||||
tag, &hc->controlmode, DeviceValueType::ENUM, FL_(enum_controlmode3), FL_(controlmode), DeviceValueUOM::NONE, MAKE_CF_CB(set_controlmode));
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
|
||||
@@ -431,12 +431,15 @@ class Thermostat : public EMSdevice {
|
||||
}
|
||||
bool set_pause(const char * value, const int8_t id);
|
||||
bool set_party(const char * value, const int8_t id);
|
||||
bool set_holidaymode(const char * value, const int8_t id);
|
||||
bool set_heatup(const char * value, const int8_t id);
|
||||
bool set_summermode(const char * value, const int8_t id);
|
||||
bool set_vacreducemode(const char * value, const int8_t id);
|
||||
bool set_nofrostmode(const char * value, const int8_t id);
|
||||
bool set_remotetemp(const char * value, const int8_t id);
|
||||
bool set_remotehum(const char * value, const int8_t id);
|
||||
bool set_roominfl_factor(const char * value, const int8_t id);
|
||||
bool set_roominfl_mode(const char * value, const int8_t id);
|
||||
bool set_reducemode(const char * value, const int8_t id);
|
||||
bool set_switchtime1(const char * value, const int8_t id);
|
||||
bool set_switchtime2(const char * value, const int8_t id);
|
||||
|
||||
@@ -295,12 +295,14 @@ MAKE_ENUM(enum_ibaLanguage_RC30, FL_(german), FL_(dutch))
|
||||
MAKE_ENUM(enum_floordrystatus, FL_(off), FL_(start), FL_(heat), FL_(hold), FL_(cool), FL_(end))
|
||||
MAKE_ENUM(enum_ibaBuildingType, FL_(light), FL_(medium), FL_(heavy))
|
||||
MAKE_ENUM(enum_PID, FL_(fast), FL_(medium), FL_(slow))
|
||||
MAKE_ENUM(enum_heatup, FL_(slow), FL_(medium), FL_(fast))
|
||||
MAKE_ENUM(enum_wwMode, FL_(off), FL_(normal), FL_(comfort), FL_(auto), FL_(own_prog))
|
||||
MAKE_ENUM(enum_wwCircMode, FL_(off), FL_(on), FL_(auto), FL_(own_prog))
|
||||
MAKE_ENUM(enum_wwMode2, FL_(off), FL_(on), FL_(auto))
|
||||
MAKE_ENUM(enum_wwMode3, FL_(on), FL_(off), FL_(auto))
|
||||
MAKE_ENUM(enum_wwMode4, FL_(off), FL_(ecoplus), FL_(eco), FL_(comfort), FL_(auto))
|
||||
MAKE_ENUM(enum_heatingtype, FL_(off), FL_(radiator), FL_(convector), FL_(floor))
|
||||
MAKE_ENUM(enum_heatingtype1, FL_(off), FL_(curve), FL_(radiator), FL_(convector), FL_(floor))
|
||||
MAKE_ENUM(enum_summermode, FL_(summer), FL_(auto), FL_(winter))
|
||||
MAKE_ENUM(enum_hpoperatingmode, FL_(off), FL_(auto), FL_(heating), FL_(cooling))
|
||||
MAKE_ENUM(enum_summer, FL_(winter), FL_(summer))
|
||||
@@ -328,9 +330,11 @@ MAKE_ENUM(enum_nofrostmode1, FL_(room), FL_(outdoor), FL_(room_outdoor))
|
||||
MAKE_ENUM(enum_controlmode, FL_(off), FL_(optimized), FL_(simple), FL_(mpc), FL_(room), FL_(power), FL_(constant))
|
||||
MAKE_ENUM(enum_controlmode1, FL_(weather_compensated), FL_(outside_basepoint), FL_(na), FL_(room), FL_(power), FL_(constant)) // RC310 1-4
|
||||
MAKE_ENUM(enum_controlmode2, FL_(outdoor), FL_(room))
|
||||
MAKE_ENUM(enum_controlmode3, FL_(off), FL_(unmixed), FL_(unmixedIPM), FL_(mixed))
|
||||
MAKE_ENUM(enum_control, FL_(off), FL_(rc20), FL_(rc3x))
|
||||
MAKE_ENUM(enum_j_control, FL_(off), FL_(fb10), FL_(fb100))
|
||||
MAKE_ENUM(enum_roomsensor, FL_(extern), FL_(intern), FL_(auto))
|
||||
MAKE_ENUM(enum_roominfluence, FL_(off), FL_(intern), FL_(extern), FL_(auto))
|
||||
MAKE_ENUM(enum_control1, FL_(rc310), FL_(rc200), FL_(rc100), FL_(rc100h), FL_(tc100))
|
||||
|
||||
MAKE_ENUM(enum_switchmode, FL_(off), FL_(eco), FL_(comfort), FL_(heat))
|
||||
|
||||
@@ -231,6 +231,7 @@ MAKE_WORD_TRANSLATION(french, "french", "Französisch", "Frans", "Franska", "fra
|
||||
MAKE_WORD_TRANSLATION(italian, "italian", "Italienisch", "Italiaans", "Italienska", "włoski", "italiensk", "italien", "İtalyanca", "Italiano", "taliansky")
|
||||
MAKE_WORD_TRANSLATION(high, "high", "hoch", "hoog", "Hög", "wysoki", "høy", "haut", "yüksek", "alto", "vysoký")
|
||||
MAKE_WORD_TRANSLATION(low, "low", "niedrig", "laag", "Låg", "niski", "lav", "bas", "düşük", "basso", "nízky")
|
||||
MAKE_WORD_TRANSLATION(curve, "heatingcurve", "Heizkurve", "", "", "", "", "", "", "", "") // TODO translate
|
||||
MAKE_WORD_TRANSLATION(radiator, "radiator", "Heizkörper", "radiator", "Radiator", "grzejniki", "radiator", "radiateur", "radyatör", "radiatore", "radiátor")
|
||||
MAKE_WORD_TRANSLATION(convector, "convector", "Konvektor", "convector", "Konvektor", "konwektory", "konvektor", "convecteur", "convector", "convettore", "konvektor")
|
||||
MAKE_WORD_TRANSLATION(floor, "floor", "Fussboden", "vloer", "Golv", "podłoga", "gulv", "sol", "yer", "pavimento", "podlaha")
|
||||
@@ -266,6 +267,9 @@ MAKE_WORD_TRANSLATION(smoke_temperature, "smoke temperature", "Abgastemperatur",
|
||||
MAKE_WORD_TRANSLATION(weather_compensated, "weather compensated", "Wetter kompensiert", "weer gecompenseerd", "Väderkompenserad", "skompensow. pogodą", "værkompensert", "compensation par l'extérieur", "hava durumuna göre dengelenmiş", "acqua compensata", "kompenzácia počasia")
|
||||
MAKE_WORD_TRANSLATION(outside_basepoint, "outside basepoint", "Basispunkt Außentemp.", "buiten basispunt", "Utomhus baspunkt", "temp. zewn. z pkt. pocz.", "utendørs basispunkt", "point de base temp. ext.", "dış hava sıcaklığı taban noktası", "basepoint esterno", "vonkajší základný bod")
|
||||
MAKE_WORD_TRANSLATION(functioning_mode, "functioning mode", "Funktionsweise", "functiemodus", "Driftläge", "tryb pracy", "driftsmodus", "mode de fonctionnement", "işletme konumu", "modalità di funzionamento", "funkčný režim")
|
||||
MAKE_WORD_TRANSLATION(unmixed, "unmixed", "ungemischt", "", "", "", "", "", "", "", "") // TODO translate
|
||||
MAKE_WORD_TRANSLATION(unmixedIPM, "unmixed IPM", "ungemischt IPM", "", "", "", "", "", "", "", "") // TODO translate
|
||||
MAKE_WORD_TRANSLATION(mixed, "mixed IPM", "gemischt IPM", "", "", "", "", "", "", "", "") // TODO translate
|
||||
|
||||
// mixer
|
||||
MAKE_WORD_TRANSLATION(stopped, "stopped", "gestoppt", "gestopt", "stoppad", "zatrzymany", "stoppet", "arrêté", "durdu", "fermato", "zastavený")
|
||||
@@ -529,12 +533,13 @@ MAKE_TRANSLATION(releaseWait, "releasewait", "boiler release wait time", "Wartez
|
||||
// energy
|
||||
MAKE_TRANSLATION(nrgTotal, "nrgtotal", "total energy", "Energie gesamt", "", "", "całkowita energia", "", "", "", "", "celková energia") // TODO translate
|
||||
MAKE_TRANSLATION(nrgHeat, "nrgheat", "energy heating", "Energie Heizen", "", "", "energia na ogrzewanie", "", "", "ısıtma enerjisi", "", "energetické vykurovanie") // TODO translate
|
||||
MAKE_TRANSLATION(nrgWw, "nrgww", "energy", "Energie", "", "", "energia na c.w.u.", "", "", "sıcak kullanım suyu enerjisi", "", "energia") // TODO translate
|
||||
MAKE_TRANSLATION(nrgWw, "nrgww", "energy", "Energie", "", "", "energia", "", "", "sıcak kullanım suyu enerjisi", "", "energia") // TODO translate
|
||||
MAKE_TRANSLATION(nomPower, "nompower", "nominal Power", "Brennerleistung", "", "", "moc nominalna", "", "", "nominal güç", "", "nominálny výkon") // TODO translate
|
||||
MAKE_TRANSLATION(meterTotal, "metertotal", "meter total", "Messung gesamt", "", "", "licznik całkowity", "", "", "", "", "meter celkom") // TODO translate
|
||||
MAKE_TRANSLATION(meterComp, "metercomp", "meter compressor", "Messung Kompressor", "", "", "licznik sprężarki", "", "", "", "", "meter kompresor") // TODO translate
|
||||
MAKE_TRANSLATION(meterEHeat, "metereheat", "meter e-heater", "Messung E-Heizer", "", "", "licznik dogrzewacza", "", "", "", "", "elektrický ohrievač") // TODO translate
|
||||
MAKE_TRANSLATION(meterHeat, "meterheat", "meter heating", "Messung Heizen", "", "", "licznik ogrzewania", "", "", "", "", "") // TODO translate
|
||||
MAKE_TRANSLATION(meterWw, "meterww", "meter", "Messung", "", "", "licznik", "", "", "", "", "") // TODO translate
|
||||
|
||||
// HIU
|
||||
MAKE_TRANSLATION(netFlowTemp, "netflowtemp", "heat network flow temp", "System Vorlauftemperatur", "Netto aanvoertemperatuur", "", "temp. zasilania sieci cieplnej", "", "", "ısıtma şebekesi akış derecesi", "temperatura di mandata della rete di riscaldamento", "teplota prívodu tepelnej siete") // TODO translate
|
||||
@@ -639,6 +644,7 @@ MAKE_TRANSLATION(roomTemp, "currtemp", "current room temperature", "aktuelle Rau
|
||||
MAKE_TRANSLATION(mode, "mode", "mode", "Modus", "Modus", "Läge", "sposób sterowania", "modus", "mode", "mod", "modalità", "režim")
|
||||
MAKE_TRANSLATION(modetype, "modetype", "mode type", "Modus Typ", "Type modus", "Typ av läge", "aktualny tryb pracy", "modusrype", "type mode", "mod tipi", "tipo di modalita", "typ režimu")
|
||||
MAKE_TRANSLATION(fastheatup, "fastheatup", "fast heatup", "schnelles Aufheizen", "Snel opwarmen", "Snabb Uppvärmning", "szybkie nagrzewanie", "rask oppvarming", "chauffage rapide", "hızlı ısıtma", "riscaldamento rapido", "rýchle zahriatie")
|
||||
MAKE_TRANSLATION(heatup, "heatup", "heatup", "Aufheizen", "opwarmen", "Uppvärmning", "nagrzewanie", "oppvarming", "chauffage", "hızlı", "riscaldamento", "rýchle zahriatie")
|
||||
MAKE_TRANSLATION(daytemp, "daytemp", "day temperature", "Tagestemperatur", "temperatuur dag", "Dagstemperatur", "temperatura w dzień", "dagtemperatur", "température jour", "gündüz sıcaklığı", "temperatura giornaliera", "denná teplota")
|
||||
MAKE_TRANSLATION(daylowtemp, "daytemp2", "day temperature T2", "Tagestemperatur T2", "Temperatuur dag T2", "Dagstemperatur T2", "temperatura w dzień T2", "dagtemperatur T2", "température jour T2", "gündüz sıcaklığı T2", "temperatura giornaliera T2", "denná teplota T2")
|
||||
MAKE_TRANSLATION(daymidtemp, "daytemp3", "day temperature T3", "Tagestemperatur T3", "Temperatuur dag T3", "Dagstemperatur T3", "temperatura w dzień T3", "dagtemperatur T3", "température jour T3", "gündüz sıcaklığı T3", "temperatura giornaliera T3", "denná teplota T3")
|
||||
|
||||
Reference in New Issue
Block a user