andry/EMS-ESP32
1
0
Fork 0
mirror of https://github.com/emsesp/EMS-ESP32.git synced 2025-12-11 02:09:57 +03:00
Code Issues Packages Projects Releases Wiki Activity

txstatus: remove all references and settings

Browse Source
This commit is contained in:
Susis Strolch
2019-07-29 21:35:22 +02:00
parent a32da99618
commit 573ebcffeb
3 changed files with 1 additions and 97 deletions
Download Patch File Download Diff File Expand all files Collapse all files

68
src/emsuart.cpp
View File

@@ -171,36 +171,6 @@ void ICACHE_FLASH_ATTR emsuart_start() {
ETS_UART_INTR_ENABLE();
}
/*
* Send a BRK signal
* Which is a 11-bit set of zero's (11 cycles)
*/
void ICACHE_FLASH_ATTR emsuart_tx_brk() {
uint32_t tmp;
// must make sure Tx FIFO is empty
while (((USS(EMSUART_UART) >> USTXC) & 0xFF) != 0)
;
tmp = ((1 << UCRXRST) | (1 << UCTXRST)); // bit mask
USC0(EMSUART_UART) |= (tmp); // set bits
USC0(EMSUART_UART) &= ~(tmp); // clear bits
// To create a 11-bit <BRK> we set TXD_BRK bit so the break signal will
// automatically be sent when the tx fifo is empty
tmp = (1 << UCBRK);
GPIO_H(TX_MARK_MASK);
USC0(EMSUART_UART) |= (tmp); // set bit
if (EMS_Sys_Status.emsTxMode <= 1) { // classic mode and ems+ (0, 1)
delayMicroseconds(EMSUART_TX_BRK_WAIT);
} else if (EMS_Sys_Status.emsTxMode == 3) { // junkers mode
delayMicroseconds(EMSUART_TX_WAIT_BRK - EMSUART_TX_LAG); // 1144 (11 Bits)
}
USC0(EMSUART_UART) &= ~(tmp); // clear bit
GPIO_L(TX_MARK_MASK);
}
/*
* Send to Tx, ending with a <BRK>
@@ -210,35 +180,7 @@ _EMS_TX_STATUS ICACHE_FLASH_ATTR emsuart_tx_buffer(uint8_t * buf, uint8_t len) {
ems_dumpBuffer("emsuart_tx_buffer: ", buf, len); // validate and transmit the EMS buffer, excluding the BRK
if (len) {
LA_PULSE(50);
// temp code until we get mode 2 working without resets
if (EMS_Sys_Status.emsTxMode == 0) { // classic mode logic
for (uint8_t i = 0; i < len; i++) {
TX_PULSE(EMSUART_BIT_TIME / 4);
USF(EMSUART_UART) = buf[i];
}
emsuart_tx_brk(); // send <BRK>
} else if (EMS_Sys_Status.emsTxMode == 1) { // With extra tx delay for EMS+
for (uint8_t i = 0; i < len; i++) {
TX_PULSE(EMSUART_BIT_TIME / 4);
USF(EMSUART_UART) = buf[i];
delayMicroseconds(EMSUART_TX_BRK_WAIT); // https://github.com/proddy/EMS-ESP/issues/23#
}
emsuart_tx_brk(); // send <BRK>
} else if (EMS_Sys_Status.emsTxMode == 3) { // Junkers logic by @philrich
for (uint8_t i = 0; i < len; i++) {
TX_PULSE(EMSUART_BIT_TIME / 4);
USF(EMSUART_UART) = buf[i];
// just to be safe wait for tx fifo empty (needed?)
while (((USS(EMSUART_UART) >> USTXC) & 0xff) != 0)
;
// wait until bits are sent on wire
delayMicroseconds(EMSUART_TX_WAIT_BYTE - EMSUART_TX_LAG + EMSUART_TX_WAIT_GAP);
}
emsuart_tx_brk(); // send <BRK>
} else if (EMS_Sys_Status.emsTxMode == 2) {
/*
/*
*
* based on code from https://github.com/proddy/EMS-ESP/issues/103 by @susisstrolch
* we emit the whole telegram, with Rx interrupt disabled, collecting busmaster response in FIFO.
@@ -321,14 +263,6 @@ _EMS_TX_STATUS ICACHE_FLASH_ATTR emsuart_tx_buffer(uint8_t * buf, uint8_t len) {
}
ETS_UART_INTR_ENABLE(); // receive anything from FIFO...
}
}
return result;
}
/*
* Send the Poll (our own ID) to Tx as a single byte and end with a <BRK>
* *** moved to ems.cpp, renamed to ems_tx_pollAck
void ICACHE_FLASH_ATTR emsuart_tx_poll() {
static uint8_t buf[1] = {EMS_ID_ME ^ EMS_Sys_Status.emsIDMask};
}
*/