Merge branch 'dev' into dev2

CHANGELOG.md

@@ -5,6 +5,43 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## [3.6.3] November 18 2023
+
+## **IMPORTANT! BREAKING CHANGES**
+
+Writeable Text entities have moved from type `sensor` to `text` in Home Assistant to make them also editable within an HA dashboard. Examples are `datetime`, `holidays`, `switchtime`, `vacations`, `maintenancedate`... You will need to manually remove any old discovery topics from your MQTT broker using an application like MQTT Explorer.
+
+## Added
+
+- humidity for ventilation devices
+- telegrams for RC100H, hc2, etc. (seen on discord, not tested)
+- names for BC400, GB192i.2, read temperatures for low loss header and heatblock [#1317](https://github.com/emsesp/EMS-ESP32/discussions/1317)
+- option for `forceheatingoff` [#1262](https://github.com/emsesp/EMS-ESP32/issues/1262)
+- remote thermostat emulation RC100H for RC3xx [#1278](https://github.com/emsesp/EMS-ESP32/discussions/1278)
+- shower_data MQTT payload contains the timestamp [#1329](https://github.com/emsesp/EMS-ESP32/issues/1329)
+- HA discovery for writeable text entities [#1337](https://github.com/emsesp/EMS-ESP32/pull/1377)
+- autodetect board_profile, store in nvs, add telnet command option, add E32V2
+- heat pump high res energy counters [#1348, #1349. #1350](https://github.com/emsesp/EMS-ESP32/issues/1348)
+- optional bssid in network settings
+- extension module EM100 [#1315](https://github.com/emsesp/EMS-ESP32/discussions/1315)
+- digital_out with new options for polarity and startup state
+- added 'system allvalues' command that dumps all the EMS device values, plus sensors and any custom entities
+
+## Fixed
+
+- remove command `remoteseltemp`, thermostat accept it only from remote thermostat
+- shower_data MQTT payload contains the timestamp [#1329](https://github.com/emsesp/EMS-ESP32/issues/1329)
+- fixed helper text in Web Device Entity dialog box for numerical ranges
+- MQTT base with paths not working in HA [#1393](https://github.com/emsesp/EMS-ESP32/issues/1393)
+
+## Changed
+
+- update to platform 6.4.0, arduino 2.0.14 / idf 4.4.6
+- small changes for arduino 3.0.0 / idf 5.1 compatibility (not backward compatible to platform 6.3.2 and before)
+- AP start after 10 sec, stay until station/eth connected
+- tested wifi-all-channel-scan (3.6.3-dev4 a-e), removed again because of connect issues
+- mqtt disconnect stops queue
+
 ## [3.6.2] October 1 2023
 
 ## **IMPORTANT! BREAKING CHANGES**

CHANGELOG_LATEST.md

@@ -1,37 +1,13 @@
 # Changelog
 
-## [3.6.3]
+## [3.6.4]
 
 ## **IMPORTANT! BREAKING CHANGES**
 
-Writeable Text entities have moved from type `sensor` to `text` in Home Assistant to make them also editable within an HA dashboard. Examples are `datetime`, `holidays`, `switchtime`, `vacations`, `maintenancedate`... You will need to manually remove any old discovery topics from your MQTT broker using an application like MQTT Explorer.
-
 ## Added
 
-- humidity for ventilation devices
+- thermostat boost mode and boost time
-- telegrams for RC100H, hc2, etc. (seen on discord, not tested)
-- names for BC400, GB192i.2, read temperatures for low loss header and heatblock [#1317](https://github.com/emsesp/EMS-ESP32/discussions/1317)
-- option for `forceheatingoff` [#1262](https://github.com/emsesp/EMS-ESP32/issues/1262)
-- remote thermostat emulation RC100H for RC3xx [#1278](https://github.com/emsesp/EMS-ESP32/discussions/1278)
-- shower_data MQTT payload contains the timestamp [#1329](https://github.com/emsesp/EMS-ESP32/issues/1329)
-- HA discovery for writeable text entities [#1337](https://github.com/emsesp/EMS-ESP32/pull/1377)
-- autodetect board_profile, store in nvs, add telnet command option, add E32V2
-- heat pump high res energy counters [#1348, #1349. #1350](https://github.com/emsesp/EMS-ESP32/issues/1348)
-- optional bssid in network settings
-- extension module EM100 [#1315](https://github.com/emsesp/EMS-ESP32/discussions/1315)
-- digital_out with new options for polarity and startup state
-- added 'system allvalues' command that dumps all the EMS device values, plus sensors and any custom entities
 
 ## Fixed
 
-- remove command `remoteseltemp`, thermostat accept it only from remote thermostat
-- shower_data MQTT payload contains the timestamp [#1329](https://github.com/emsesp/EMS-ESP32/issues/1329)
-- fixed helper text in Web Device Entity dialog box for numerical ranges
-
 ## Changed
-
-- update to platform 6.4.0, arduino 2.0.14 / idf 4.4.6
-- small changes for arduino 3.0.0 / idf 5.1 compatibility (not backward compatible to platform 6.3.2 and before)
-- AP start after 10 sec, stay until station/eth connected
-- tested wifi-all-channel-scan (3.6.3-dev4 a-e), removed again because of connect issues
-- mqtt disconnect stops queue

Makefile

@@ -42,7 +42,7 @@ DEFINES += -DARDUINOJSON_ENABLE_STD_STRING=1 -DARDUINOJSON_ENABLE_PROGMEM=1 -DAR
 DEFINES += -DEMSESP_DEBUG -DEMSESP_STANDALONE -DEMSESP_TEST -D__linux__ -DEMC_RX_BUFFER_SIZE=1500
 DEFINES += $(ARGS)
 
-DEFAULTS = -DEMSESP_DEFAULT_LOCALE=\"en\" -DEMSESP_DEFAULT_TX_MODE=8 -DEMSESP_DEFAULT_VERSION=\"3.6.0-dev\" -DEMSESP_DEFAULT_BOARD_PROFILE=\"S32\"
+DEFAULTS = -DEMSESP_DEFAULT_LOCALE=\"en\" -DEMSESP_DEFAULT_TX_MODE=8 -DEMSESP_DEFAULT_VERSION=\"3.6.3-dev\" -DEMSESP_DEFAULT_BOARD_PROFILE=\"S32\"
 
 #----------------------------------------------------------------------
 # Sources & Files

interface/package.json

@@ -29,7 +29,7 @@
     "@table-library/react-table-library": "4.1.7",
     "@types/imagemin": "^8.0.4",
     "@types/lodash-es": "^4.17.11",
-    "@types/node": "^20.9.1",
+    "@types/node": "^20.9.2",
     "@types/react": "^18.2.37",
     "@types/react-dom": "^18.2.15",
     "@types/react-router-dom": "^5.3.3",
@@ -55,7 +55,7 @@
     "@typescript-eslint/eslint-plugin": "^6.11.0",
     "@typescript-eslint/parser": "^6.11.0",
     "concurrently": "^8.2.2",
-    "eslint": "^8.53.0",
+    "eslint": "^8.54.0",
     "eslint-config-airbnb": "^19.0.4",
     "eslint-config-airbnb-typescript": "^17.1.0",
     "eslint-config-prettier": "^9.0.0",

interface/vite.config.ts

@@ -5,7 +5,6 @@ import viteImagemin from 'vite-plugin-imagemin';
 import { visualizer } from 'rollup-plugin-visualizer';
 
 export default defineConfig(({ command, mode }) => {
-  // standalone build for development - runs the server
   if (command === 'serve') {
     console.log('Preparing for standalone build with server, mode=' + mode);
     return {
@@ -30,9 +29,17 @@ export default defineConfig(({ command, mode }) => {
     };
   }
 
+  if (command === 'build' && mode === 'hosted') {
+    return {
+      plugins: [preact(), viteTsconfigPaths()],
+      build: {
+        chunkSizeWarningLimit: 1024
+      }
+    };
+  }
+
   // production build, both for hosted and building the firmware
   if (command === 'build') {
-    console.log('Preparing for production build, mode is ' + mode);
     return {
       plugins: [
         preact(),
@@ -79,11 +86,7 @@ export default defineConfig(({ command, mode }) => {
 
       build: {
         // target: 'es2022',
-        outDir: 'dist',
-        reportCompressedSize: false,
         chunkSizeWarningLimit: 1024,
-        sourcemap: false,
-        manifest: false,
         minify: 'terser',
         terserOptions: {
           compress: {
@@ -109,16 +112,6 @@ export default defineConfig(({ command, mode }) => {
           nameCache: null,
           safari10: false,
           toplevel: false
-        },
-
-        rollupOptions: {
-          // Ignore "use client" waning since we are not using SSR
-          onwarn(warning, warn) {
-            if (warning.code === 'MODULE_LEVEL_DIRECTIVE' && warning.message.includes(`"use client"`)) {
-              return;
-            }
-            warn(warning);
-          }
         }
       }
     };

interface/yarn.lock

@@ -746,10 +746,10 @@ __metadata:
   languageName: node
   linkType: hard
 
-"@eslint/js@npm:8.53.0":
+"@eslint/js@npm:8.54.0":
-  version: 8.53.0
+  version: 8.54.0
-  resolution: "@eslint/js@npm:8.53.0"
+  resolution: "@eslint/js@npm:8.54.0"
-  checksum: a372d55aa2bbe0d9399acc8de3c892dcfe507fd914d29fde6826ae54a13452619be626aa7eb70b1ec4d4da5302b6ed8e8ac9bf1f830003f15c0ad56c30b4f520
+  checksum: 4d491ff234cd94b54499428cb3435623270ff8cc59950e13e6e1ac2fa350ec60502dac7bfd4f486523fee65ad7a358034570fe776b81b14dbfe5525d1e26e1d8
   languageName: node
   linkType: hard
 
@@ -1478,12 +1478,12 @@ __metadata:
   languageName: node
   linkType: hard
 
-"@types/node@npm:^20.9.1":
+"@types/node@npm:^20.9.2":
-  version: 20.9.1
+  version: 20.9.2
-  resolution: "@types/node@npm:20.9.1"
+  resolution: "@types/node@npm:20.9.2"
   dependencies:
     undici-types: "npm:~5.26.4"
-  checksum: b2b3f9ee31db63ccd3d48e5597d359c3385879679f37a749e473b47068aae181d0e280f39f153d75ce704640b3ec09d029aecd2a686e5658fb866254dc7e781b
+  checksum: 8bab2870bfc02efc988c53dfb0149634f8feb824132cc7f20b36f3d55d89ef893e3a43d545524a5cb3a284f4ce68ae4181d75a4a39cee6b79c586d719e6b7461
   languageName: node
   linkType: hard
 
@@ -1745,7 +1745,7 @@ __metadata:
     "@table-library/react-table-library": "npm:4.1.7"
     "@types/imagemin": "npm:^8.0.4"
     "@types/lodash-es": "npm:^4.17.11"
-    "@types/node": "npm:^20.9.1"
+    "@types/node": "npm:^20.9.2"
     "@types/react": "npm:^18.2.37"
     "@types/react-dom": "npm:^18.2.15"
     "@types/react-router-dom": "npm:^5.3.3"
@@ -1754,7 +1754,7 @@ __metadata:
     alova: "npm:^2.13.1"
     async-validator: "npm:^4.2.5"
     concurrently: "npm:^8.2.2"
-    eslint: "npm:^8.53.0"
+    eslint: "npm:^8.54.0"
     eslint-config-airbnb: "npm:^19.0.4"
     eslint-config-airbnb-typescript: "npm:^17.1.0"
     eslint-config-prettier: "npm:^9.0.0"
@@ -3842,14 +3842,14 @@ __metadata:
   languageName: node
   linkType: hard
 
-"eslint@npm:^8.53.0":
+"eslint@npm:^8.54.0":
-  version: 8.53.0
+  version: 8.54.0
-  resolution: "eslint@npm:8.53.0"
+  resolution: "eslint@npm:8.54.0"
   dependencies:
     "@eslint-community/eslint-utils": "npm:^4.2.0"
     "@eslint-community/regexpp": "npm:^4.6.1"
     "@eslint/eslintrc": "npm:^2.1.3"
-    "@eslint/js": "npm:8.53.0"
+    "@eslint/js": "npm:8.54.0"
     "@humanwhocodes/config-array": "npm:^0.11.13"
     "@humanwhocodes/module-importer": "npm:^1.0.1"
     "@nodelib/fs.walk": "npm:^1.2.8"
@@ -3886,7 +3886,7 @@ __metadata:
     text-table: "npm:^0.2.0"
   bin:
     eslint: bin/eslint.js
-  checksum: e305a71ce2b9a8631b293266fe53e346c76f28bc8d004af33f10e537cf133db1fb87af3599376e70ed6e0f89a78be10c4f08ddd0c1c9c0c497cd143b4a270420
+  checksum: 379827964fd7885a4d48611a5237cf5c534eff0ad3d0c1a1d6a14d52ac6758f4efdccd924c9bb3a9aa4dc80a3446d48dc49f61733cd5bd5f74419d0240970e7b
   languageName: node
   linkType: hard
 

mock-api/server.js

@@ -324,7 +324,7 @@ security_settings = {
   ]
 };
 const features = {
-  version: 'v3.6.0-demo',
+  version: 'v3.6.3-demo',
   // platform: 'ESP32'
   platform: 'ESP32-S3'
 };
@@ -353,6 +353,54 @@ const EMSESP_RESET_CUSTOMIZATIONS_ENDPOINT = REST_ENDPOINT_ROOT + 'resetCustomiz
 const EMSESP_WRITE_SCHEDULE_ENDPOINT = REST_ENDPOINT_ROOT + 'schedule';
 const EMSESP_WRITE_ENTITIES_ENDPOINT = REST_ENDPOINT_ROOT + 'entities';
 
+const emsesp_info = {
+  System: {
+    version: '3.6.3',
+    uptime: '001+06:40:34.018',
+    'uptime (seconds)': 110434,
+    freemem: 131,
+    'reset reason': 'Software reset CPU / Software reset CPU',
+    'Sensor sensors': 3
+  },
+  Network: {
+    connection: 'Ethernet',
+    hostname: 'ems-esp',
+    MAC: 'A8:03:2A:62:64:CF',
+    'IPv4 address': '192.168.1.134/255.255.255.0',
+    'IPv4 gateway': '192.168.1.1',
+    'IPv4 nameserver': '192.168.1.1'
+  },
+  Status: {
+    'bus status': 'connected',
+    'bus protocol': 'Buderus',
+    'telegrams received': 84986,
+    'read requests sent': 14748,
+    'write requests sent': 3,
+    'incomplete telegrams': 8,
+    'tx fails': 0,
+    'rx line quality': 100,
+    'tx line quality': 100,
+    MQTT: 'connected',
+    'MQTT publishes': 46336,
+    'MQTT publish fails': 0,
+    'Sensor reads': 22086,
+    'Sensor fails': 0
+  },
+  Devices: [
+    {
+      type: 'Boiler',
+      name: 'Nefit GBx72/Trendline/Cerapur/Greenstar Si/27i (DeviceID:0x08 ProductID:123, Version:06.01)',
+      handlers:
+        '0x10 0x11 0xC2 0x14 0x15 0x1C 0x18 0x19 0x1A 0x35 0x16 0x33 0x34 0x26 0x2A 0xD1 0xE3 0xE4 0xE5 0xE6 0xE9 0xEA'
+    },
+    {
+      type: 'Thermostat',
+      name: 'RC20/Moduline 300 (DeviceID:0x17, ProductID:77, Version:03.03)',
+      handlers: '0xA3 0x06 0xA2 0x12 0x91 0xA8'
+    }
+  ]
+};
+
 settings = {
   locale: 'en',
   tx_mode: 4,
@@ -2638,53 +2686,6 @@ rest_server.get(EMSESP_BOARDPROFILE_ENDPOINT, (req, res) => {
 });
 
 // EMS-ESP API specific
-const emsesp_info = {
-  System: {
-    version: '3.6.2',
-    uptime: '001+06:40:34.018',
-    'uptime (seconds)': 110434,
-    freemem: 131,
-    'reset reason': 'Software reset CPU / Software reset CPU',
-    'Sensor sensors': 3
-  },
-  Network: {
-    connection: 'Ethernet',
-    hostname: 'ems-esp',
-    MAC: 'A8:03:2A:62:64:CF',
-    'IPv4 address': '192.168.1.134/255.255.255.0',
-    'IPv4 gateway': '192.168.1.1',
-    'IPv4 nameserver': '192.168.1.1'
-  },
-  Status: {
-    'bus status': 'connected',
-    'bus protocol': 'Buderus',
-    'telegrams received': 84986,
-    'read requests sent': 14748,
-    'write requests sent': 3,
-    'incomplete telegrams': 8,
-    'tx fails': 0,
-    'rx line quality': 100,
-    'tx line quality': 100,
-    MQTT: 'connected',
-    'MQTT publishes': 46336,
-    'MQTT publish fails': 0,
-    'Sensor reads': 22086,
-    'Sensor fails': 0
-  },
-  Devices: [
-    {
-      type: 'Boiler',
-      name: 'Nefit GBx72/Trendline/Cerapur/Greenstar Si/27i (DeviceID:0x08 ProductID:123, Version:06.01)',
-      handlers:
-        '0x10 0x11 0xC2 0x14 0x15 0x1C 0x18 0x19 0x1A 0x35 0x16 0x33 0x34 0x26 0x2A 0xD1 0xE3 0xE4 0xE5 0xE6 0xE9 0xEA'
-    },
-    {
-      type: 'Thermostat',
-      name: 'RC20/Moduline 300 (DeviceID:0x17, ProductID:77, Version:03.03)',
-      handlers: '0xA3 0x06 0xA2 0x12 0x91 0xA8'
-    }
-  ]
-};
 
 rest_server.post(API_ENDPOINT_ROOT, (req, res) => {
   console.log('Generic API POST');

platformio.ini

@@ -83,8 +83,8 @@ extra_scripts = scripts/rename_fw.py
 board = esp32dev
 board_build.partitions = esp32_partition_4M.csv
 board_build.extra_flags = -DBOARD_HAS_PSRAM
-build_flags = ${common.build_flags}
 build_unflags = ${common.unbuild_flags}
+build_flags = ${common.build_flags}
 
 [env:ci_s3]
 extends = espressi32_base
@@ -93,10 +93,11 @@ board = lolin_s3
 board_build.f_cpu = 240000000L
 board_upload.flash_size = 16MB
 board_build.partitions = esp32_partition_16M.csv
+build_unflags = ${common.unbuild_flags}
 build_flags =
   ${common.build_flags}
   -O2
-build_unflags = ${common.unbuild_flags}
+  '-DEMSESP_DEFAULT_BOARD_PROFILE="S32S3"'
 
 [env:esp32_4M]
 extends = espressi32_base_tasmota
@@ -171,7 +172,7 @@ platform = native
 build_flags =
   -DARDUINOJSON_ENABLE_STD_STRING=1 -DARDUINOJSON_ENABLE_PROGMEM=1 -DARDUINOJSON_ENABLE_ARDUINO_STRING -DARDUINOJSON_USE_DOUBLE=0
   -DEMSESP_DEBUG -DEMSESP_STANDALONE -DEMSESP_TEST -D__linux__
-  -DEMSESP_DEFAULT_LOCALE=\"en\" -DEMSESP_DEFAULT_TX_MODE=8 -DEMSESP_DEFAULT_VERSION=\"3.6.0-dev\" -DEMSESP_DEFAULT_BOARD_PROFILE=\"S32\"
+  -DEMSESP_DEFAULT_LOCALE=\"en\" -DEMSESP_DEFAULT_TX_MODE=8 -DEMSESP_DEFAULT_VERSION=\"3.6.3-dev\" -DEMSESP_DEFAULT_BOARD_PROFILE=\"S32\"
 	-lpthread
   -std=gnu++11 -Og -ggdb
 build_src_flags =

sonar-project.properties

@@ -1,7 +1,7 @@
 sonar.organization=emsesp
 sonar.projectKey=emsesp_EMS-ESP32
 sonar.projectName=EMS-ESP32
-sonar.projectVersion=3.6.0
+sonar.projectVersion=3.6.3
 sonar.sources=./src
 sonar.cfamily.build-wrapper-output=bw-output
 sonar.sourceEncoding=UTF-8

src/devices/thermostat.cpp

@@ -1023,14 +1023,13 @@ void Thermostat::process_RC300Set(std::shared_ptr<const Telegram> telegram) {
     // has_update(telegram, hc->selTemp, 10, 1); // single byte conversion, value is * 2 - manual
 
     telegram->read_value(hc->mode_new, 21); // 0-off, 1-manual, 2-auto
-    if (hc->mode_new <= 2) {
+    if (Helpers::hasValue(hc->mode_new)) {
         has_update(hc->mode, hc->mode_new);
     } else {
         uint8_t mode = hc->mode == 2 ? 0xFF : 0; // auto : manual
-        if (telegram->read_value(mode, 0)) {
+        telegram->read_value(mode, 0);
         has_update(hc->mode, mode == 0xFF ? 2 : 1);
     }
-    }
     has_update(telegram, hc->daytemp, 2);   // is * 2
     has_update(telegram, hc->nighttemp, 4); // is * 2
 
@@ -2455,8 +2454,9 @@ bool Thermostat::set_mode(const char * value, const int8_t id) {
     // check for the mode being a full string name or single digit
     if (!Helpers::value2enum(value, enum_index, mode_list)) {
         mode_list = FL_(enum_mode_ha);
-        if (Mqtt::ha_enabled() && !Helpers::value2enum(value, enum_index, mode_list)) {
+        if (!Mqtt::ha_enabled() || !Helpers::value2enum(value, enum_index, mode_list)) {
-            LOG_WARNING("wrong mode: %s", value);
+            // We have logging on fail in command.cpp
+            // LOG_WARNING("wrong mode: %s", value);
             return false; // not found
         }
     }
@@ -2597,7 +2597,7 @@ bool Thermostat::set_mode_n(const uint8_t mode, const uint8_t hc_num) {
     if (model_ == EMSdevice::EMS_DEVICE_FLAG_RC10) {
         hc->mode = set_mode_value >> 1;
     } else if (model_ == EMSdevice::EMS_DEVICE_FLAG_RC300 || model_ == EMSdevice::EMS_DEVICE_FLAG_RC100) {
-        hc->mode = set_mode_value ? 1 : 0;
+        hc->mode = Helpers::hasValue(hc->mode_new) ? set_mode_value : set_mode_value == 0xFF ? 2 : 1;
     } else if (model_ == EMSdevice::EMS_DEVICE_FLAG_JUNKERS) {
         hc->mode = set_mode_value - 1;
     } else {

src/system.cpp

@@ -1099,7 +1099,7 @@ bool System::check_upgrade(bool factory_settings) {
         missing_version = (settingsVersion.empty() || (settingsVersion.length() < 5));
         if (missing_version) {
             LOG_WARNING("No version information found (%s)", settingsVersion.c_str());
-            settingsVersion = "3.6.2"; // this was the last stable version
+            settingsVersion = "3.6.3"; // this was the last stable version
         }
     }
 

src/version.h

@@ -1 +1 @@
-#define EMSESP_APP_VERSION "3.6.3-dev.10a"
+#define EMSESP_APP_VERSION "3.6.4-dev.0a"