andry/EMS-ESP32
1
0
Fork 0
mirror of https://github.com/emsesp/EMS-ESP32.git synced 2026-03-21 17:16:34 +03:00
Code Issues Packages Projects Releases Wiki Activity

WIP: ESP-IDF Core 3 migration - mbedtls SSL, module library, board configs, MQTT and network updates

Browse Source
This commit is contained in:
proddy
2026-02-15 13:53:13 +01:00
parent e9f77c1bde
commit 6741232450
44 changed files with 29993 additions and 241 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
src/uart/emsuart_esp32.cpp
View File

@@ -52,7 +52,7 @@ void EMSuart::uart_event_task(void * pvParameters) {
uart_read_bytes(EMSUART_NUM, telegram, length, portMAX_DELAY);
EMSESP::incoming_telegram(telegram, (uint8_t)(length - 1));
} else { // flush buffer up to break
uint8_t buf[UART_FIFO_LEN];
uint8_t buf[SOC_UART_FIFO_LEN];
uart_read_bytes(EMSUART_NUM, buf, length, portMAX_DELAY);
}
length = 0;
@@ -74,12 +74,8 @@ void EMSuart::start(const uint8_t tx_mode, const uint8_t rx_gpio, const uint8_t
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
.rx_flow_ctrl_thresh = 0,
.source_clk = UART_SCLK_APB
#if ESP_ARDUINO_VERSION_MAJOR >= 3
,
.flags = {0, 0}
#endif
};
.source_clk = UART_SCLK_APB,
.flags = {0}};
#if defined(EMSUART_RX_INVERT)
inverse_mask |= UART_SIGNAL_RXD_INV;
#endif
@@ -89,7 +85,7 @@ void EMSuart::start(const uint8_t tx_mode, const uint8_t rx_gpio, const uint8_t
uart_param_config(EMSUART_NUM, &uart_config);
uart_set_pin(EMSUART_NUM, tx_gpio, rx_gpio, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
uart_set_line_inverse(EMSUART_NUM, inverse_mask);
uart_driver_install(EMSUART_NUM, UART_FIFO_LEN + 1, 0, (EMS_MAXBUFFERSIZE + 1) * 2, &uart_queue, 0); // buffer must be > fifo
uart_driver_install(EMSUART_NUM, SOC_UART_FIFO_LEN + 1, 0, (EMS_MAXBUFFERSIZE + 1) * 2, &uart_queue, 0); // buffer must be > fifo
uart_set_rx_full_threshold(EMSUART_NUM, 1);
uart_set_rx_timeout(EMSUART_NUM, 0); // disable