DE translations for Settings, Customizations and Help

interface/src/i18n/de/index.ts

@@ -38,9 +38,11 @@ const de: Translation = {
   SAVE: 'Speichern',
   REMOVE: 'Entfernen',
   PROBLEM_UPDATING: 'Problem beim Aktualisieren',
+  PROBLEM_LOADING: 'Problem beim Holen',
   ACCESS_DENIED: 'Zugriff abgelehnt',
   ANALOG_SENSOR: 'Analoger Sensor{post}',
   TEMP_SENSOR: 'Temperatursensor{post}',
+  TEMP_SENSORS: 'Temperatursensoren',
   WRITE_COMMAND: 'Befehl schreiben {cmd}',
   EMS_BUS_WARNING:
     'EMS-Bus getrennt. Wenn diese Warnung nach einigen Sekunden immer noch besteht, überprüfen Sie bitte die Einstellungen und das Board-Profil',
@@ -52,7 +54,7 @@ const de: Translation = {
   EMS_SCAN: 'Möchten Sie wirklich einen vollständigen Gerätescan des EMS-Busses starten?',
   EMS_BUS_STATUS: 'EMS Bus Status',
   ACTIVE_DEVICES: 'Aktive Geräte und Sensoren',
-  DEVICE: 'Device',
+  DEVICE: 'Gerät',
   SUCCESS: 'ERFOLG',
   FAIL: 'SCHEITERN',
   QUALITY: 'QUALITÄT',
@@ -75,7 +77,72 @@ const de: Translation = {
   NUM_DAYS: '{num} Tag{{en}}',
   NUM_SECONDS: '{num} Sekund{{en}}',
   NUM_HOURS: '{num} Stunde{{n}}',
-  NUM_MINUTES: '{num} Minute{{en}}'
+  NUM_MINUTES: '{num} Minute{{en}}',
+  APPLICATION_SETTINGS: 'Anwendungseinstellungen',
+  CUSTOMIZATION: 'Anpassung',
+  APPLICATION_RESTARTING: 'EMS-ESP startet neu',
+  BOARD_PROFILE_TEXT:
+    'Wählen Sie ein vorkonfiguriertes Schnittstellenkartenprofil aus der Liste unten aus oder wählen Sie Benutzerdefiniert, um Ihre eigenen Hardwareeinstellungen zu konfigurieren',
+  BOARD_PROFILE: 'Board Profil',
+  BUTTON: 'Druckknopf',
+  TEMPERATURE: 'Temperatur',
+  DISABLED: 'deaktiviert',
+  GENERAL_OPTIONS: 'Allgemeine Optionen',
+  LANGUAGE_ENTITIES: 'Sprache (für Geräteentitäten)',
+  HIDE_LED: 'ausblenden LED',
+  ENABLE_TELNET: 'Ermöglichen Telnet Console',
+  ENABLE_ANALOG: 'Ermöglichen Analogsensorsen',
+  CONVERT_FAHRENHEIT: 'Konvertieren Sie Temperaturwerte in Fahrenheit',
+  BYPASS_TOKEN: 'Zugriffstoken-Autorisierung bei API-Aufrufen umgehen',
+  READONLY: 'Nur-Lese-Modus aktivieren (blockiert alle ausgehenden EMS Tx Write-Befehle)',
+  UNDERCLOCK_CPU: 'CPU-Geschwindigkeit untertakten',
+  ENABLE_SHOWER_TIMER: 'Duschtimer aktivieren',
+  ENABLE_SHOWER_ALERT: 'Duschalarm aktivieren',
+  TRIGGER_TIME: 'Auslösezeit',
+  COLD_SHOT_DURATION: 'Kaltschussdauer',
+  FORMATTING_OPTIONS: 'Formatierungsoptionen',
+  BOOLEAN_FORMAT_DASHBOARD: 'Dashboard im booleschen Format',
+  BOOLEAN_FORMAT_API: 'Boolesches Format API/MQTT',
+  ENUM_FORMAT: 'Enum Format API/MQTT',
+  INDEX: 'Index',
+  ENABLE_PARASITE: 'Parasiten-Power aktivieren',
+  LOGGING: 'Protokollierung',
+  LOG_HEX: 'EMS-Telegramme hexadezimal protokollieren',
+  ENABLE_SYSLOG: 'Syslog aktivieren',
+  MARK_INTERVAL: 'Intervallmarke',
+  SECONDS: 'sekunden',
+  MINUTES: 'minuten',
+  RESTART: 'Neu starten',
+  RESTART_TEXT: 'muss neu gestartet werden, um geänderte Systemeinstellungen zu übernehmen',
+  COMMAND: 'Befehl',
+  CUSTOMIZATIONS_RESTART: 'Alle Anpassungen wurden entfernt. Neustart...',
+  CUSTOMIZATIONS_FULL: 'Ausgewählte Entitäten haben das Limit von 60 überschritten. Bitte stapelweise speichern',
+  CUSTOMIZATIONS_SAVED: 'Anpassungen gespeichert',
+  CUSTOMIZATIONS_HELP_1: 'Wählen Sie ein Gerät aus und passen Sie die Entitäten mithilfe der Optionen an',
+  CUSTOMIZATIONS_HELP_2: 'als Favorit markieren',
+  CUSTOMIZATIONS_HELP_3: 'Schreibaktion deaktivieren',
+  CUSTOMIZATIONS_HELP_4: 'von MQTT und API ausschließen',
+  CUSTOMIZATIONS_HELP_5: 'Aus dem Dashboard ausblenden',
+  SELECT_DEVICE: 'Wählen Sie ein Gerät aus',
+  SET_ALL: 'setzen Sie alle',
+  OPTIONS: 'Optionen',
+  NAME: 'Name',
+  CUSTOMIZATIONS_RESET:
+    'Möchten Sie wirklich alle Anpassungen entfernen, einschließlich der benutzerdefinierten Einstellungen der Temperatur- und Analogsensoren?',
+  DEVICE_ENTITIES: 'Geräteentitäten',
+  CONFIGURE: 'konfigurieren',
+  USER_CUSTOMIZATION: 'Benutzeranpassung',
+  SUPPORT_INFORMATION: 'Unterstützende Informationen',
+  HELP_INFORMATION_1: 'Besuchen Sie das Online',
+  HELP_INFORMATION_2: 'um Anweisungen zu erhalten, wie es geht',
+  HELP_INFORMATION_3: 'und auf andere Informationen zugreifen',
+  HELP_INFORMATION_4: 'Für einen Live-Community-Chat treten Sie unserem bei',
+  HELP_INFORMATION_5: 'Sende ein',
+  HELP_INFORMATION_6: 'Support-Problem',
+  HELP_INFORMATION_7: 'um eine neue Funktion anzufordern oder einen Fehler zu melden',
+  HELP_INFORMATION_8: 'Überzeugen Sie sich auch',
+  HELP_INFORMATION_9: 'und hängen Sie Ihre Systemdetails für eine schnellere Antwort an',
+  HELP_INFORMATION_10: 'EMS-ESP wird immer ein kostenloses Open-Source-Projekt sein. Bitte erwägen Sie, es mit einem '
 };
 
 export default de;

interface/src/i18n/en/index.ts

@@ -38,9 +38,11 @@ const en: BaseTranslation = {
   SAVE: 'Save',
   REMOVE: 'Remove',
   PROBLEM_UPDATING: 'Problem updating',
+  PROBLEM_LOADING: 'Problem loading',
   ACCESS_DENIED: 'Access Denied',
   ANALOG_SENSOR: 'Analog Sensor{post}',
   TEMP_SENSOR: 'Temperature Sensor{post}',
+  TEMP_SENSORS: 'Temperature Sensors',
   WRITE_COMMAND: 'Write command {cmd}',
   EMS_BUS_WARNING:
     'EMS bus disconnected. If this warning still persists after a few seconds please check settings and board profile',
@@ -75,7 +77,72 @@ const en: BaseTranslation = {
   NUM_DAYS: '{num} Day{{s}}',
   NUM_SECONDS: '{num} Second{{s}}',
   NUM_HOURS: '{num} Hour{{s}}',
-  NUM_MINUTES: '{num} Minute{{s}}'
+  NUM_MINUTES: '{num} Minute{{s}}',
+  APPLICATION_SETTINGS: 'Application Settings',
+  CUSTOMIZATION: 'Customization',
+  APPLICATION_RESTARTING: 'EMS-ESP is restarting',
+  BOARD_PROFILE_TEXT:
+    'Select a pre-configured interface board profile from the list below or choose Custom to configure your own hardware settings',
+  BOARD_PROFILE: 'Board Profile',
+  BUTTON: 'Button',
+  TEMPERATURE: 'Temperature',
+  DISABLED: 'disabled',
+  GENERAL_OPTIONS: 'General Options',
+  LANGUAGE_ENTITIES: 'Language (for device entities)',
+  HIDE_LED: 'Hide LED',
+  ENABLE_TELNET: 'Enable Telnet Console',
+  ENABLE_ANALOG: 'Enable Analog Sensors',
+  CONVERT_FAHRENHEIT: 'Convert temperature values to Fahrenheit',
+  BYPASS_TOKEN: 'Bypass Access Token authorization on API calls',
+  READONLY: 'Enable read-only mode (blocks all outgoing EMS Tx Write commands)',
+  UNDERCLOCK_CPU: 'Underclock CPU speed',
+  ENABLE_SHOWER_TIMER: 'Enable Shower Timer',
+  ENABLE_SHOWER_ALERT: 'Enable Shower Alert',
+  TRIGGER_TIME: 'Trigger Time',
+  COLD_SHOT_DURATION: 'Cold Shot Duration',
+  FORMATTING_OPTIONS: 'Formatting Options',
+  BOOLEAN_FORMAT_DASHBOARD: 'Boolean Format Dashboard',
+  BOOLEAN_FORMAT_API: 'Boolean Format API/MQTT',
+  ENUM_FORMAT: 'Enum Format API/MQTT',
+  INDEX: 'Index',
+  ENABLE_PARASITE: 'Enable parasite power',
+  LOGGING: 'Logging',
+  LOG_HEX: 'Log EMS telegrams in hexadecimal',
+  ENABLE_SYSLOG: 'Enable Syslog',
+  MARK_INTERVAL: 'Mark Interval',
+  SECONDS: 'seconds',
+  MINUTES: 'minutes',
+  RESTART: 'Restart',
+  RESTART_TEXT: 'EMS-ESP needs to be restarted to apply changed system settings',
+  COMMAND: 'Command',
+  CUSTOMIZATIONS_RESTART: 'All customizations have been removed. Restarting...',
+  CUSTOMIZATIONS_FULL: 'Selected entities exceeded limit of 60. Please Save in batches',
+  CUSTOMIZATIONS_SAVED: 'Customizations saved',
+  CUSTOMIZATIONS_HELP_1: 'Select a device and customize the entities using the options',
+  CUSTOMIZATIONS_HELP_2: 'mark as favorite',
+  CUSTOMIZATIONS_HELP_3: 'disable write action',
+  CUSTOMIZATIONS_HELP_4: 'exclude from MQTT and API',
+  CUSTOMIZATIONS_HELP_5: 'hide from Dashboard',
+  SELECT_DEVICE: 'Select a device',
+  SET_ALL: 'set all',
+  OPTIONS: 'Options',
+  NAME: 'Name',
+  CUSTOMIZATIONS_RESET:
+    'Are you sure you want remove all customizations including the custom settings of the Temperature and Analog sensors?',
+  DEVICE_ENTITIES: 'Device Entities',
+  CONFIGURE: 'configure',
+  USER_CUSTOMIZATION: 'User Customization',
+  SUPPORT_INFORMATION: 'Support Information',
+  HELP_INFORMATION_1: 'Visit the online',
+  HELP_INFORMATION_2: 'to get instructions on how to',
+  HELP_INFORMATION_3: 'and access other information',
+  HELP_INFORMATION_4: 'For live community chat join our',
+  HELP_INFORMATION_5: 'Submit a',
+  HELP_INFORMATION_6: 'support issue',
+  HELP_INFORMATION_7: 'for requesting a new feature or reporting a bug',
+  HELP_INFORMATION_8: 'Make sure you also',
+  HELP_INFORMATION_9: 'and attach your system details for a faster response',
+  HELP_INFORMATION_10: 'EMS-ESP will always be a free and open-source project. Please consider supporting it with a '
 };
 
 export default en;

interface/src/i18n/i18n-types.ts

@@ -163,6 +163,10 @@ type RootTranslation = {
 	 * Problem updating
 	 */
 	PROBLEM_UPDATING: string
+	/**
+	 * Problem loading
+	 */
+	PROBLEM_LOADING: string
 	/**
 	 * Access Denied
 	 */
@@ -177,6 +181,10 @@ type RootTranslation = {
 	 * @param {unknown} post
 	 */
 	TEMP_SENSOR: RequiredParams<'post'>
+	/**
+	 * Temperature Sensors
+	 */
+	TEMP_SENSORS: string
 	/**
 	 * Write command {cmd}
 	 * @param {unknown} cmd
@@ -315,6 +323,258 @@ type RootTranslation = {
 	 * @param {string | number | boolean} num
 	 */
 	NUM_MINUTES: RequiredParams<'num'>
+	/**
+	 * Application Settings
+	 */
+	APPLICATION_SETTINGS: string
+	/**
+	 * Customization
+	 */
+	CUSTOMIZATION: string
+	/**
+	 * EMS-ESP is restarting
+	 */
+	APPLICATION_RESTARTING: string
+	/**
+	 * Select a pre-configured interface board profile from the list below or choose Custom to configure your own hardware settings
+	 */
+	BOARD_PROFILE_TEXT: string
+	/**
+	 * Board Profile
+	 */
+	BOARD_PROFILE: string
+	/**
+	 * Button
+	 */
+	BUTTON: string
+	/**
+	 * Temperature
+	 */
+	TEMPERATURE: string
+	/**
+	 * disabled
+	 */
+	DISABLED: string
+	/**
+	 * General Options
+	 */
+	GENERAL_OPTIONS: string
+	/**
+	 * Language (for device entities)
+	 */
+	LANGUAGE_ENTITIES: string
+	/**
+	 * Hide LED
+	 */
+	HIDE_LED: string
+	/**
+	 * Enable Telnet Console
+	 */
+	ENABLE_TELNET: string
+	/**
+	 * Enable Analog Sensors
+	 */
+	ENABLE_ANALOG: string
+	/**
+	 * Convert temperature values to Fahrenheit
+	 */
+	CONVERT_FAHRENHEIT: string
+	/**
+	 * Bypass Access Token authorization on API calls
+	 */
+	BYPASS_TOKEN: string
+	/**
+	 * Enable read-only mode (blocks all outgoing EMS Tx Write commands)
+	 */
+	READONLY: string
+	/**
+	 * Underclock CPU speed
+	 */
+	UNDERCLOCK_CPU: string
+	/**
+	 * Enable Shower Timer
+	 */
+	ENABLE_SHOWER_TIMER: string
+	/**
+	 * Enable Shower Alert
+	 */
+	ENABLE_SHOWER_ALERT: string
+	/**
+	 * Trigger Time
+	 */
+	TRIGGER_TIME: string
+	/**
+	 * Cold Shot Duration
+	 */
+	COLD_SHOT_DURATION: string
+	/**
+	 * Formatting Options
+	 */
+	FORMATTING_OPTIONS: string
+	/**
+	 * Boolean Format Dashboard
+	 */
+	BOOLEAN_FORMAT_DASHBOARD: string
+	/**
+	 * Boolean Format API/MQTT
+	 */
+	BOOLEAN_FORMAT_API: string
+	/**
+	 * Enum Format API/MQTT
+	 */
+	ENUM_FORMAT: string
+	/**
+	 * Index
+	 */
+	INDEX: string
+	/**
+	 * Enable parasite power
+	 */
+	ENABLE_PARASITE: string
+	/**
+	 * Logging
+	 */
+	LOGGING: string
+	/**
+	 * Log EMS telegrams in hexadecimal
+	 */
+	LOG_HEX: string
+	/**
+	 * Enable Syslog
+	 */
+	ENABLE_SYSLOG: string
+	/**
+	 * Mark Interval
+	 */
+	MARK_INTERVAL: string
+	/**
+	 * seconds
+	 */
+	SECONDS: string
+	/**
+	 * minutes
+	 */
+	MINUTES: string
+	/**
+	 * Restart
+	 */
+	RESTART: string
+	/**
+	 * EMS-ESP needs to be restarted to apply changed system settings
+	 */
+	RESTART_TEXT: string
+	/**
+	 * Command
+	 */
+	COMMAND: string
+	/**
+	 * All customizations have been removed. Restarting...
+	 */
+	CUSTOMIZATIONS_RESTART: string
+	/**
+	 * Selected entities exceeded limit of 60. Please Save in batches
+	 */
+	CUSTOMIZATIONS_FULL: string
+	/**
+	 * Customizations saved
+	 */
+	CUSTOMIZATIONS_SAVED: string
+	/**
+	 * Select a device and customize the entities using the options
+	 */
+	CUSTOMIZATIONS_HELP_1: string
+	/**
+	 * mark as favorite
+	 */
+	CUSTOMIZATIONS_HELP_2: string
+	/**
+	 * disable write action
+	 */
+	CUSTOMIZATIONS_HELP_3: string
+	/**
+	 * exclude from MQTT and API
+	 */
+	CUSTOMIZATIONS_HELP_4: string
+	/**
+	 * hide from Dashboard
+	 */
+	CUSTOMIZATIONS_HELP_5: string
+	/**
+	 * Select a device
+	 */
+	SELECT_DEVICE: string
+	/**
+	 * set all
+	 */
+	SET_ALL: string
+	/**
+	 * Options
+	 */
+	OPTIONS: string
+	/**
+	 * Name
+	 */
+	NAME: string
+	/**
+	 * Are you sure you want remove all customizations including the custom settings of the Temperature and Analog sensors?
+	 */
+	CUSTOMIZATIONS_RESET: string
+	/**
+	 * Device Entities
+	 */
+	DEVICE_ENTITIES: string
+	/**
+	 * configure
+	 */
+	CONFIGURE: string
+	/**
+	 * User Customization
+	 */
+	USER_CUSTOMIZATION: string
+	/**
+	 * Support Information
+	 */
+	SUPPORT_INFORMATION: string
+	/**
+	 * Visit the online
+	 */
+	HELP_INFORMATION_1: string
+	/**
+	 * to get instructions on how to
+	 */
+	HELP_INFORMATION_2: string
+	/**
+	 * and access other information
+	 */
+	HELP_INFORMATION_3: string
+	/**
+	 * For live community chat join our
+	 */
+	HELP_INFORMATION_4: string
+	/**
+	 * Submit a
+	 */
+	HELP_INFORMATION_5: string
+	/**
+	 * support issue
+	 */
+	HELP_INFORMATION_6: string
+	/**
+	 * for requesting a new feature or reporting a bug
+	 */
+	HELP_INFORMATION_7: string
+	/**
+	 * Make sure you also
+	 */
+	HELP_INFORMATION_8: string
+	/**
+	 * and attach your system details for a faster response
+	 */
+	HELP_INFORMATION_9: string
+	/**
+	 * EMS-ESP will always be a free and open-source project. Please consider supporting it with a 
+	 */
+	HELP_INFORMATION_10: string
 }
 
 export type TranslationFunctions = {
@@ -466,6 +726,10 @@ export type TranslationFunctions = {
 	 * Problem updating
 	 */
 	PROBLEM_UPDATING: () => LocalizedString
+	/**
+	 * Problem loading
+	 */
+	PROBLEM_LOADING: () => LocalizedString
 	/**
 	 * Access Denied
 	 */
@@ -478,6 +742,10 @@ export type TranslationFunctions = {
 	 * Temperature Sensor{post}
 	 */
 	TEMP_SENSOR: (arg: { post: unknown }) => LocalizedString
+	/**
+	 * Temperature Sensors
+	 */
+	TEMP_SENSORS: () => LocalizedString
 	/**
 	 * Write command {cmd}
 	 */
@@ -608,6 +876,258 @@ export type TranslationFunctions = {
 	 * {num} Minute{{s}}
 	 */
 	NUM_MINUTES: (arg: { num: string | number | boolean }) => LocalizedString
+	/**
+	 * Application Settings
+	 */
+	APPLICATION_SETTINGS: () => LocalizedString
+	/**
+	 * Customization
+	 */
+	CUSTOMIZATION: () => LocalizedString
+	/**
+	 * EMS-ESP is restarting
+	 */
+	APPLICATION_RESTARTING: () => LocalizedString
+	/**
+	 * Select a pre-configured interface board profile from the list below or choose Custom to configure your own hardware settings
+	 */
+	BOARD_PROFILE_TEXT: () => LocalizedString
+	/**
+	 * Board Profile
+	 */
+	BOARD_PROFILE: () => LocalizedString
+	/**
+	 * Button
+	 */
+	BUTTON: () => LocalizedString
+	/**
+	 * Temperature
+	 */
+	TEMPERATURE: () => LocalizedString
+	/**
+	 * disabled
+	 */
+	DISABLED: () => LocalizedString
+	/**
+	 * General Options
+	 */
+	GENERAL_OPTIONS: () => LocalizedString
+	/**
+	 * Language (for device entities)
+	 */
+	LANGUAGE_ENTITIES: () => LocalizedString
+	/**
+	 * Hide LED
+	 */
+	HIDE_LED: () => LocalizedString
+	/**
+	 * Enable Telnet Console
+	 */
+	ENABLE_TELNET: () => LocalizedString
+	/**
+	 * Enable Analog Sensors
+	 */
+	ENABLE_ANALOG: () => LocalizedString
+	/**
+	 * Convert temperature values to Fahrenheit
+	 */
+	CONVERT_FAHRENHEIT: () => LocalizedString
+	/**
+	 * Bypass Access Token authorization on API calls
+	 */
+	BYPASS_TOKEN: () => LocalizedString
+	/**
+	 * Enable read-only mode (blocks all outgoing EMS Tx Write commands)
+	 */
+	READONLY: () => LocalizedString
+	/**
+	 * Underclock CPU speed
+	 */
+	UNDERCLOCK_CPU: () => LocalizedString
+	/**
+	 * Enable Shower Timer
+	 */
+	ENABLE_SHOWER_TIMER: () => LocalizedString
+	/**
+	 * Enable Shower Alert
+	 */
+	ENABLE_SHOWER_ALERT: () => LocalizedString
+	/**
+	 * Trigger Time
+	 */
+	TRIGGER_TIME: () => LocalizedString
+	/**
+	 * Cold Shot Duration
+	 */
+	COLD_SHOT_DURATION: () => LocalizedString
+	/**
+	 * Formatting Options
+	 */
+	FORMATTING_OPTIONS: () => LocalizedString
+	/**
+	 * Boolean Format Dashboard
+	 */
+	BOOLEAN_FORMAT_DASHBOARD: () => LocalizedString
+	/**
+	 * Boolean Format API/MQTT
+	 */
+	BOOLEAN_FORMAT_API: () => LocalizedString
+	/**
+	 * Enum Format API/MQTT
+	 */
+	ENUM_FORMAT: () => LocalizedString
+	/**
+	 * Index
+	 */
+	INDEX: () => LocalizedString
+	/**
+	 * Enable parasite power
+	 */
+	ENABLE_PARASITE: () => LocalizedString
+	/**
+	 * Logging
+	 */
+	LOGGING: () => LocalizedString
+	/**
+	 * Log EMS telegrams in hexadecimal
+	 */
+	LOG_HEX: () => LocalizedString
+	/**
+	 * Enable Syslog
+	 */
+	ENABLE_SYSLOG: () => LocalizedString
+	/**
+	 * Mark Interval
+	 */
+	MARK_INTERVAL: () => LocalizedString
+	/**
+	 * seconds
+	 */
+	SECONDS: () => LocalizedString
+	/**
+	 * minutes
+	 */
+	MINUTES: () => LocalizedString
+	/**
+	 * Restart
+	 */
+	RESTART: () => LocalizedString
+	/**
+	 * EMS-ESP needs to be restarted to apply changed system settings
+	 */
+	RESTART_TEXT: () => LocalizedString
+	/**
+	 * Command
+	 */
+	COMMAND: () => LocalizedString
+	/**
+	 * All customizations have been removed. Restarting...
+	 */
+	CUSTOMIZATIONS_RESTART: () => LocalizedString
+	/**
+	 * Selected entities exceeded limit of 60. Please Save in batches
+	 */
+	CUSTOMIZATIONS_FULL: () => LocalizedString
+	/**
+	 * Customizations saved
+	 */
+	CUSTOMIZATIONS_SAVED: () => LocalizedString
+	/**
+	 * Select a device and customize the entities using the options
+	 */
+	CUSTOMIZATIONS_HELP_1: () => LocalizedString
+	/**
+	 * mark as favorite
+	 */
+	CUSTOMIZATIONS_HELP_2: () => LocalizedString
+	/**
+	 * disable write action
+	 */
+	CUSTOMIZATIONS_HELP_3: () => LocalizedString
+	/**
+	 * exclude from MQTT and API
+	 */
+	CUSTOMIZATIONS_HELP_4: () => LocalizedString
+	/**
+	 * hide from Dashboard
+	 */
+	CUSTOMIZATIONS_HELP_5: () => LocalizedString
+	/**
+	 * Select a device
+	 */
+	SELECT_DEVICE: () => LocalizedString
+	/**
+	 * set all
+	 */
+	SET_ALL: () => LocalizedString
+	/**
+	 * Options
+	 */
+	OPTIONS: () => LocalizedString
+	/**
+	 * Name
+	 */
+	NAME: () => LocalizedString
+	/**
+	 * Are you sure you want remove all customizations including the custom settings of the Temperature and Analog sensors?
+	 */
+	CUSTOMIZATIONS_RESET: () => LocalizedString
+	/**
+	 * Device Entities
+	 */
+	DEVICE_ENTITIES: () => LocalizedString
+	/**
+	 * configure
+	 */
+	CONFIGURE: () => LocalizedString
+	/**
+	 * User Customization
+	 */
+	USER_CUSTOMIZATION: () => LocalizedString
+	/**
+	 * Support Information
+	 */
+	SUPPORT_INFORMATION: () => LocalizedString
+	/**
+	 * Visit the online
+	 */
+	HELP_INFORMATION_1: () => LocalizedString
+	/**
+	 * to get instructions on how to
+	 */
+	HELP_INFORMATION_2: () => LocalizedString
+	/**
+	 * and access other information
+	 */
+	HELP_INFORMATION_3: () => LocalizedString
+	/**
+	 * For live community chat join our
+	 */
+	HELP_INFORMATION_4: () => LocalizedString
+	/**
+	 * Submit a
+	 */
+	HELP_INFORMATION_5: () => LocalizedString
+	/**
+	 * support issue
+	 */
+	HELP_INFORMATION_6: () => LocalizedString
+	/**
+	 * for requesting a new feature or reporting a bug
+	 */
+	HELP_INFORMATION_7: () => LocalizedString
+	/**
+	 * Make sure you also
+	 */
+	HELP_INFORMATION_8: () => LocalizedString
+	/**
+	 * and attach your system details for a faster response
+	 */
+	HELP_INFORMATION_9: () => LocalizedString
+	/**
+	 * EMS-ESP will always be a free and open-source project. Please consider supporting it with a 
+	 */
+	HELP_INFORMATION_10: () => LocalizedString
 }
 
 export type Formatters = {}