make all default settings configurable at build

src/default_settings.h

@@ -0,0 +1,155 @@
+/*
+ * EMS-ESP - https://github.com/emsesp/EMS-ESP
+ * Copyright 2020  Paul Derbyshire
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef EMSESP_DEFAULT_SETTINGS_H
+#define EMSESP_DEFAULT_SETTINGS_H
+
+// GENERAL SETTINGS
+
+#ifndef EMSESP_DEFAULT_TX_MODE
+#define EMSESP_DEFAULT_TX_MODE 1 // EMS1.0
+#endif
+
+#ifndef EMSESP_DEFAULT_TX_DELAY
+#define EMSESP_DEFAULT_TX_DELAY 0 // no delay
+#endif
+
+#ifndef EMSESP_DEFAULT_EMS_BUS_ID
+#define EMSESP_DEFAULT_EMS_BUS_ID 0x0B // service key
+#endif
+
+#ifndef EMSESP_DEFAULT_SYSLOG_ENABLED
+#define EMSESP_DEFAULT_SYSLOG_ENABLED false
+#endif
+
+#ifndef EMSESP_DEFAULT_SYSLOG_LEVEL
+#define EMSESP_DEFAULT_SYSLOG_LEVEL 3 // ERR
+#endif
+
+#ifndef EMSESP_DEFAULT_SYSLOG_MARK_INTERVAL
+#define EMSESP_DEFAULT_SYSLOG_MARK_INTERVAL 0
+#endif
+
+#ifndef EMSESP_DEFAULT_SYSLOG_HOST
+#define EMSESP_DEFAULT_SYSLOG_HOST ""
+#endif
+
+#ifndef EMSESP_DEFAULT_SYSLOG_PORT
+#define EMSESP_DEFAULT_SYSLOG_PORT 514
+#endif
+
+#ifndef EMSESP_DEFAULT_TRACELOG_RAW
+#define EMSESP_DEFAULT_TRACELOG_RAW false
+#endif
+
+#ifndef EMSESP_DEFAULT_MASTER_THERMOSTAT
+#define EMSESP_DEFAULT_MASTER_THERMOSTAT 0 // not set
+#endif
+
+#ifndef EMSESP_DEFAULT_SHOWER_TIMER
+#define EMSESP_DEFAULT_SHOWER_TIMER false
+#endif
+
+#ifndef EMSESP_DEFAULT_SHOWER_ALERT
+#define EMSESP_DEFAULT_SHOWER_ALERT false
+#endif
+
+#ifndef EMSESP_DEFAULT_HIDE_LED
+#define EMSESP_DEFAULT_HIDE_LED false
+#endif
+
+#ifndef EMSESP_DEFAULT_DALLAS_PARASITE
+#define EMSESP_DEFAULT_DALLAS_PARASITE false
+#endif
+
+#ifndef EMSESP_DEFAULT_API_ENABLED
+#define EMSESP_DEFAULT_API_ENABLED false // turn off, because its insecure
+#endif
+
+#ifndef EMSESP_DEFAULT_BOOL_FORMAT
+#define EMSESP_DEFAULT_BOOL_FORMAT 1 // on/off
+#endif
+
+#ifndef EMSESP_DEFAULT_ANALOG_ENABLED
+#define EMSESP_DEFAULT_ANALOG_ENABLED false
+#endif
+
+#ifndef EMSESP_DEFAULT_BOARD_PROFILE
+#define EMSESP_DEFAULT_BOARD_PROFILE "S32" // Gateway S32
+#endif
+
+// Default GPIO PIN definitions - based on Wemos/Nodemcu
+
+#ifndef EMSESP_DEFAULT_RX_GPIO
+#define EMSESP_DEFAULT_RX_GPIO 23 // D7
+#endif
+
+#ifndef EMSESP_DEFAULT_TX_GPIO
+#define EMSESP_DEFAULT_TX_GPIO 5 // D8
+#endif
+
+#ifndef EMSESP_DEFAULT_DALLAS_GPIO
+#define EMSESP_DEFAULT_DALLAS_GPIO 18
+#endif
+
+#ifndef EMSESP_DEFAULT_LED_GPIO
+#define EMSESP_DEFAULT_LED_GPIO 2
+#endif
+
+#ifndef EMSESP_DEFAULT_PBUTTON_GPIO
+#define EMSESP_DEFAULT_PBUTTON_GPIO 0
+#endif
+
+// MQTT
+
+#ifndef EMSESP_DEFAULT_BOOL_FORMAT
+#define EMSESP_DEFAULT_BOOL_FORMAT 1 // on/off
+#endif
+
+#ifndef EMSESP_DEFAULT_DALLAS_FORMAT
+#define EMSESP_DEFAULT_DALLAS_FORMAT 1 // sensorid
+#endif
+
+#ifndef EMSESP_DEFAULT_HA_CLIMATE_FORMAT
+#define EMSESP_DEFAULT_HA_CLIMATE_FORMAT 1 // current temp
+#endif
+
+#ifndef EMSESP_DEFAULT_MQTT_QOS
+#define EMSESP_DEFAULT_MQTT_QOS 0
+#endif
+
+#ifndef EMSESP_DEFAULT_MQTT_RETAIN
+#define EMSESP_DEFAULT_MQTT_RETAIN false
+#endif
+
+#ifndef EMSESP_DEFAULT_HA_ENABLED
+#define EMSESP_DEFAULT_HA_ENABLED false
+#endif
+
+#ifndef EMSESP_DEFAULT_PUBLISH_TIME
+#define EMSESP_DEFAULT_PUBLISH_TIME 10
+#endif
+
+#ifndef EMSESP_DEFAULT_NESTED_FORMAT
+#define EMSESP_DEFAULT_NESTED_FORMAT true
+#endif
+
+#ifndef EMSESP_DEFAULT_SUBSCRIBE_FORMAT
+#define EMSESP_DEFAULT_SUBSCRIBE_FORMAT 0
+#endif
+
+#endif