andry/EMS-ESP32
1
0
Fork 0
mirror of https://github.com/emsesp/EMS-ESP32.git synced 2026-04-30 12:35:10 +00:00
Code Issues Packages Projects Releases Wiki Activity

uart buffer size

Browse Source
This commit is contained in:
MichaelDvP
2026-04-13 13:58:30 +02:00
parent d6a9f2a731
commit 9522945e06
1 changed files with 6 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
src/uart/emsuart_esp32.cpp
View File

@@ -39,21 +39,19 @@ uint32_t inverse_mask = 0;
// receive task, wait for break and call incoming_telegram
void EMSuart::uart_event_task(void * pvParameters) {
uart_event_t event;
uint8_t telegram[EMS_MAXBUFFERSIZE];
uint8_t telegram[UART_FIFO_LEN + 1]; // same size as in driver_install
uint8_t length = 0;
while (1) {
//Waiting for UART event.
// Waiting for UART event.
if (xQueueReceive(uart_queue, (void *)&event, portMAX_DELAY)) {
if (event.type == UART_DATA) {
length += event.size;
} else if (event.type == UART_BREAK) {
// read buffer up to break
uart_read_bytes(EMSUART_NUM, telegram, length, portMAX_DELAY);
if (length == 2 || (length >= 6 && length <= EMS_MAXBUFFERSIZE)) {
uart_read_bytes(EMSUART_NUM, telegram, length, portMAX_DELAY);
EMSESP::incoming_telegram(telegram, (uint8_t)(length - 1));
} else { // flush buffer up to break
uint8_t buf[UART_FIFO_LEN];
uart_read_bytes(EMSUART_NUM, buf, length, portMAX_DELAY);
}
length = 0;
} else if (event.type == UART_BUFFER_FULL) {
@@ -68,14 +66,6 @@ void EMSuart::uart_event_task(void * pvParameters) {
// initialize UART driver
void EMSuart::start(const uint8_t tx_mode, const uint8_t rx_gpio, const uint8_t tx_gpio) {
if (tx_mode_ == EMS_TXMODE_INIT) {
#if CONFIG_IDF_TARGET_ESP32C6
uart_config_t uart_config = {.baud_rate = EMSUART_BAUD,
.data_bits = UART_DATA_8_BITS,
.parity = UART_PARITY_DISABLE,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
.rx_flow_ctrl_thresh = 0};
#else
uart_config_t uart_config = {.baud_rate = EMSUART_BAUD,
.data_bits = UART_DATA_8_BITS,
.parity = UART_PARITY_DISABLE,
@@ -85,10 +75,9 @@ void EMSuart::start(const uint8_t tx_mode, const uint8_t rx_gpio, const uint8_t
.source_clk = UART_SCLK_APB
#if ESP_ARDUINO_VERSION_MAJOR >= 3
,
.flags = {0, 0}
.flags = {0}
#endif
};
#endif
#if defined(EMSUART_RX_INVERT)
inverse_mask |= UART_SIGNAL_RXD_INV;
#endif
@@ -98,7 +87,7 @@ void EMSuart::start(const uint8_t tx_mode, const uint8_t rx_gpio, const uint8_t
uart_param_config(EMSUART_NUM, &uart_config);
uart_set_pin(EMSUART_NUM, tx_gpio, rx_gpio, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
uart_set_line_inverse(EMSUART_NUM, inverse_mask);
uart_driver_install(EMSUART_NUM, UART_FIFO_LEN + 1, 0, (EMS_MAXBUFFERSIZE + 1) * 2, &uart_queue, 0); // buffer must be > fifo
uart_driver_install(EMSUART_NUM, UART_FIFO_LEN + 1, 0, UART_FIFO_LEN + 3, &uart_queue, 0); // buffer must be > fifo, queue can hold data+break+overflow message
uart_set_rx_full_threshold(EMSUART_NUM, 1);
uart_set_rx_timeout(EMSUART_NUM, 0); // disable