summery over last commitsto MM10

- add MM200 warm water circuits (#299)
- add terminal boiler wwactive on/off command (#301)
- show first active thermostat hc in web (instead always 1)
- add log d [id] to show messages from/to specific ID (may replace log t and log s)
- add mixer version to info
- add warm water circulation active to terminal and mqtt
- mqtt subscribe only to active hc
- change NOTSET values for short/ushort and set the compare to level (match 0x7D00, 0x8000 and 0x8300 as notset)
- add calculated flow temperature to thermostat stats

src/ems-esp.cpp

@@ -103,7 +103,7 @@ static const command_t project_cmds[] PROGMEM = {
     {true, "master_thermostat [product id]", "set default thermostat to use. Omit [product id] to show options."},
 
     {false, "info", "show current values deciphered from the EMS messages"},
-    {false, "log <n | b | t | s | r | j | v | w [type ID]", "set logging to none, basic, thermostat, solar module, raw, jabber, verbose or watch a specific type"},
+    {false, "log <n | b | t | s | r | j | v | w [ID] | d [ID]>", "logging: none, basic, thermo, solar, raw, jabber, verbose, watch a type or device"},
  
 #ifdef TESTS
     {false, "test <n>", "insert a test telegram on to the EMS bus"},
@@ -120,6 +120,7 @@ static const command_t project_cmds[] PROGMEM = {
     {false, "thermostat mode [hc] <mode>", "set mode (0=off, 1=manual, 2=auto) for heating circuit hc 1-4"},
     {false, "boiler read <type ID>", "send read request to boiler"},
     {false, "boiler wwtemp <degrees>", "set boiler warm water temperature"},
+    {false, "boiler wwactive <on | off>", "set boiler warm water on/off"},
     {false, "boiler tapwater <on | off>", "set boiler warm tap water on/off"},
     {false, "boiler flowtemp <degrees>", "set boiler flow temperature"},
     {false, "boiler comfort <hot | eco | intelligent>", "set boiler warm water comfort setting"}
@@ -232,6 +233,8 @@ void showInfo() {
         myDebug_P(PSTR("  System logging set to Jabber"));
     } else if (sysLog == EMS_SYS_LOGGING_WATCH) {
         myDebug_P(PSTR("  System logging set to Watch"));
+    } else if (sysLog == EMS_SYS_LOGGING_DEVICE) {
+        myDebug_P(PSTR("  System logging set to device"));
     } else {
         myDebug_P(PSTR("  System logging set to None"));
     }
@@ -481,7 +484,7 @@ void showInfo() {
         myDebug_P(PSTR("%sMixing module stats:%s"), COLOR_BOLD_ON, COLOR_BOLD_OFF);
         myDebug_P(PSTR("  Mixing: %s"), ems_getDeviceDescription(EMS_DEVICE_TYPE_MIXING, buffer_type,false));
         if (EMS_Boiler.switchTemp < EMS_VALUE_USHORT_NOTSET)
-           _renderShortValue("Switch temperature", "C", EMS_Boiler.switchTemp);
+           _renderUShortValue("Switch temperature", "C", EMS_Boiler.switchTemp);
 
         for (uint8_t hc_num = 1; hc_num <= EMS_THERMOSTAT_MAXHC; hc_num++) {
             if (EMS_Mixing.hc[hc_num - 1].active) {
@@ -496,6 +499,17 @@ void showInfo() {
                     _renderIntValue(" Current valve status", "", EMS_Mixing.hc[hc_num - 1].valveStatus);
             }
         }
+        for (uint8_t wwc_num = 1; wwc_num <= EMS_THERMOSTAT_MAXWWC; wwc_num++) {
+            if (EMS_Mixing.wwc[wwc_num - 1].active) {
+                myDebug_P(PSTR("  Warm Water Buffer %d"), wwc_num);
+                if (EMS_Mixing.wwc[wwc_num - 1].flowTemp < EMS_VALUE_USHORT_NOTSET)
+                    _renderUShortValue(" Current warm water temperature", "C", EMS_Mixing.wwc[wwc_num - 1].flowTemp);
+                if (EMS_Mixing.wwc[wwc_num - 1].pumpMod != EMS_VALUE_INT_NOTSET)
+                    _renderIntValue(" Current pump status", "", EMS_Mixing.wwc[wwc_num - 1].pumpMod);
+                if (EMS_Mixing.wwc[wwc_num - 1].tempStatus != EMS_VALUE_INT_NOTSET)
+                    _renderIntValue(" Current temp status", "", EMS_Mixing.wwc[wwc_num - 1].tempStatus);
+            }
+        }
     }
 
     // Dallas external temp sensors
@@ -777,7 +791,6 @@ void publishEMSValues(bool force) {
                 strlcpy(hc, THERMOSTAT_HC, sizeof(hc));
                 strlcat(hc, _int_to_char(s, mixing->hc), sizeof(hc));
                 JsonObject dataMixing = rootMixing.createNestedObject(hc);
-
                 if (mixing->flowTemp < EMS_VALUE_USHORT_NOTSET)
                     dataMixing["flowTemp"] = (float)mixing->flowTemp / 10;
                 if (mixing->flowSetTemp != EMS_VALUE_INT_NOTSET)
@@ -788,6 +801,23 @@ void publishEMSValues(bool force) {
                     dataMixing["valveStatus"] = mixing->valveStatus;
             }
         }
+        for (uint8_t wwc_v = 1; wwc_v <= EMS_THERMOSTAT_MAXWWC; wwc_v++) {
+            _EMS_Mixing_WWC * mixing = &EMS_Mixing.wwc[wwc_v - 1];
+            // only send if we have an active Warm water Circuit with real data
+            if (mixing->active) {
+                // build new json object
+                char wwc[10]; // wc{1-2}
+                strlcpy(wwc, "wwc", sizeof(wwc));
+                strlcat(wwc, _int_to_char(s, mixing->wwc), sizeof(wwc));
+                JsonObject dataMixing = rootMixing.createNestedObject(wwc);
+                if (mixing->flowTemp < EMS_VALUE_USHORT_NOTSET)
+                    dataMixing["wwTemp"] = (float)mixing->flowTemp / 10;
+                if (mixing->pumpMod != EMS_VALUE_INT_NOTSET)
+                    dataMixing["pumpStatus"] = mixing->pumpMod;
+                if (mixing->tempStatus != EMS_VALUE_INT_NOTSET)
+                    dataMixing["tempStatus"] = mixing->tempStatus;
+            }
+        }
 
         data[0] = '\0'; // reset data for next package
         serializeJson(doc, data, sizeof(data));
@@ -1276,6 +1306,9 @@ void TelnetCommandCallback(uint8_t wc, const char * commandLine) {
         } else if ((strcmp(second_cmd, "w") == 0) && (wc == 3)) {
             ems_setLogging(EMS_SYS_LOGGING_WATCH, _readHexNumber()); // get type_id
             ok = true;
+        } else if ((strcmp(second_cmd, "d") == 0) && (wc == 3)) {
+            ems_setLogging(EMS_SYS_LOGGING_DEVICE, _readHexNumber()); // get device_id
+            ok = true;
         }
     }
 
@@ -1335,6 +1368,15 @@ void TelnetCommandCallback(uint8_t wc, const char * commandLine) {
         } else if (strcmp(second_cmd, "flowtemp") == 0) {
             ems_setFlowTemp(_readIntNumber());
             ok = true;
+        } else if (strcmp(second_cmd, "wwactive") == 0) {
+            char * third_cmd = _readWord();
+            if (strcmp(third_cmd, "on") == 0) {
+                ems_setWarmWaterActivated(true);
+                ok = true;
+            } else if (strcmp(third_cmd, "off") == 0) {
+                ems_setWarmWaterActivated(false);
+                ok = true;
+            }
         }
     }
 
@@ -1403,13 +1445,16 @@ void MQTTCallback(unsigned int type, const char * topic, const char * message) {
         char topic_s[50];
         char buffer[4];
         for (uint8_t hc = 1; hc <= EMS_THERMOSTAT_MAXHC; hc++) {
-            strlcpy(topic_s, TOPIC_THERMOSTAT_CMD_TEMP_HA, sizeof(topic_s));
+            // subscribe onlyto active hc
-            strlcat(topic_s, itoa(hc, buffer, 10), sizeof(topic_s));
+            if(EMS_Thermostat.hc[hc - 1].active) {
-            myESP.mqttSubscribe(topic_s);
+                strlcpy(topic_s, TOPIC_THERMOSTAT_CMD_TEMP_HA, sizeof(topic_s));
+                strlcat(topic_s, itoa(hc, buffer, 10), sizeof(topic_s));
+                myESP.mqttSubscribe(topic_s);
 
-            strlcpy(topic_s, TOPIC_THERMOSTAT_CMD_MODE_HA, sizeof(topic_s));
+                strlcpy(topic_s, TOPIC_THERMOSTAT_CMD_MODE_HA, sizeof(topic_s));
-            strlcat(topic_s, itoa(hc, buffer, 10), sizeof(topic_s));
+                strlcat(topic_s, itoa(hc, buffer, 10), sizeof(topic_s));
-            myESP.mqttSubscribe(topic_s);
+                myESP.mqttSubscribe(topic_s);
+            }
         }
 
         // generic incoming MQTT command for Thermostat
@@ -1574,7 +1619,7 @@ void MQTTCallback(unsigned int type, const char * topic, const char * message) {
     uint8_t hc;
     // thermostat temp changes
     hc = _hasHCspecified(TOPIC_THERMOSTAT_CMD_TEMP_HA, topic);
-    if (hc) {
+    if (hc && EMS_Thermostat.hc[hc - 1].active) {
         float f = strtof((char *)message, 0);
         ems_setThermostatTemp(f, hc);
         publishEMSValues(true); // publish back immediately
@@ -1583,7 +1628,7 @@ void MQTTCallback(unsigned int type, const char * topic, const char * message) {
 
     // thermostat mode changes
     hc = _hasHCspecified(TOPIC_THERMOSTAT_CMD_MODE_HA, topic);
-    if (hc) {
+    if (hc && EMS_Thermostat.hc[hc - 1].active) {
         if (strncmp(message, "auto", 4) == 0) {
             ems_setThermostatMode(2, hc);
         } else if ((strncmp(message, "day", 4) == 0) || (strncmp(message, "manual", 6) == 0) || (strncmp(message, "heat", 4) == 0)) {
@@ -1607,7 +1652,7 @@ void MQTTCallback(unsigned int type, const char * topic, const char * message) {
 
         // thermostat temp changes
         hc = _hasHCspecified(TOPIC_THERMOSTAT_CMD_TEMP, command);
-        if (hc) {
+        if (hc && EMS_Thermostat.hc[hc - 1].active) {
             float f = doc["data"];
             ems_setThermostatTemp(f, hc);
             publishEMSValues(true); // publish back immediately
@@ -1616,7 +1661,7 @@ void MQTTCallback(unsigned int type, const char * topic, const char * message) {
 
         // thermostat mode changes
         hc = _hasHCspecified(TOPIC_THERMOSTAT_CMD_MODE, command);
-        if (hc) {
+        if (hc && EMS_Thermostat.hc[hc - 1].active) {
             const char * data_cmd = doc["data"];
             if (strncmp(data_cmd, "auto", 4) == 0) {
                 ems_setThermostatMode(2, hc);
@@ -1630,7 +1675,7 @@ void MQTTCallback(unsigned int type, const char * topic, const char * message) {
 
         // set night temp value
         hc = _hasHCspecified(TOPIC_THERMOSTAT_CMD_NIGHTTEMP, command);
-        if (hc) {
+        if (hc && EMS_Thermostat.hc[hc - 1].active) {
             float f = doc["data"];
             ems_setThermostatTemp(f, hc, 1); // night
             return;
@@ -1638,7 +1683,7 @@ void MQTTCallback(unsigned int type, const char * topic, const char * message) {
 
         // set daytemp value
         hc = _hasHCspecified(TOPIC_THERMOSTAT_CMD_DAYTEMP, command);
-        if (hc) {
+        if (hc && EMS_Thermostat.hc[hc - 1].active) {
             float f = doc["data"];
             ems_setThermostatTemp(f, hc, 2); // day
             return;
@@ -1646,7 +1691,7 @@ void MQTTCallback(unsigned int type, const char * topic, const char * message) {
 
         // set holiday value
         hc = _hasHCspecified(TOPIC_THERMOSTAT_CMD_HOLIDAYTEMP, command);
-        if (hc) {
+        if (hc && EMS_Thermostat.hc[hc - 1].active) {
             float f = doc["data"];
             ems_setThermostatTemp(f, hc, 3); // holiday
             return;
@@ -1727,7 +1772,7 @@ void WebCallback(JsonObject root) {
 
         uint8_t hc_num = 1; // default to HC1
         uint8_t model  = ems_getThermostatModel();
-        while (hc_num <= EMS_THERMOSTAT_MAXHC && !EMS_Thermostat.hc[hc_num - 1].active) hc_num++;
+        while (hc_num < EMS_THERMOSTAT_MAXHC && !EMS_Thermostat.hc[hc_num - 1].active) hc_num++; // first active hc
         // Render Current & Setpoint Room Temperature
         if (model == EMS_DEVICE_FLAG_EASY) {
             if (EMS_Thermostat.hc[hc_num - 1].setpoint_roomTemp > EMS_VALUE_SHORT_NOTSET)

src/ems.cpp

@@ -128,6 +128,12 @@ void ems_init() {
         EMS_Mixing.hc[i].valveStatus = EMS_VALUE_INT_NOTSET;
         EMS_Mixing.hc[i].flowSetTemp = EMS_VALUE_INT_NOTSET;
     }
+    for (uint8_t i = 0; i < EMS_THERMOSTAT_MAXWWC; i++) {
+        EMS_Mixing.wwc[i].wwc          = i + 1;
+        EMS_Mixing.wwc[i].flowTemp    = EMS_VALUE_USHORT_NOTSET;
+        EMS_Mixing.wwc[i].pumpMod     = EMS_VALUE_INT_NOTSET;
+        EMS_Mixing.wwc[i].tempStatus  = EMS_VALUE_INT_NOTSET;
+    }
 
     // UBAParameterWW
     EMS_Boiler.wWActivated     = EMS_VALUE_BOOL_NOTSET; // Warm Water activated
@@ -281,9 +287,9 @@ _EMS_SYS_LOGGING ems_getLogging() {
     return EMS_Sys_Status.emsLogging;
 }
 
-void ems_setLogging(_EMS_SYS_LOGGING loglevel, uint16_t type_id) {
+void ems_setLogging(_EMS_SYS_LOGGING loglevel, uint16_t id) {
-    EMS_Sys_Status.emsLogging_typeID = type_id;
+    EMS_Sys_Status.emsLogging_ID = id;
-    ems_setLogging(EMS_SYS_LOGGING_WATCH, false);
+    ems_setLogging(loglevel, false);
 }
 
 void ems_setLogging(_EMS_SYS_LOGGING loglevel, bool quiet) {
@@ -309,6 +315,8 @@ void ems_setLogging(_EMS_SYS_LOGGING loglevel, bool quiet) {
         myDebug_P(PSTR("System Logging set to Jabber mode"));
     } else if (loglevel == EMS_SYS_LOGGING_WATCH) {
         myDebug_P(PSTR("System Logging set to Watch mode"));
+    } else if (loglevel == EMS_SYS_LOGGING_DEVICE) {
+        myDebug_P(PSTR("System Logging set to Device mode"));
     }
 }
 
@@ -850,8 +858,11 @@ void ems_parseTelegram(uint8_t * telegram, uint8_t length) {
     // but still continue to process it
     if ((EMS_Sys_Status.emsLogging == EMS_SYS_LOGGING_RAW)) {
         _debugPrintTelegram("", &EMS_RxTelegram, COLOR_WHITE, true);
-    } else if ((EMS_Sys_Status.emsLogging == EMS_SYS_LOGGING_WATCH) && (EMS_RxTelegram.type == EMS_Sys_Status.emsLogging_typeID)) {
+    } else if ((EMS_Sys_Status.emsLogging == EMS_SYS_LOGGING_WATCH) && (EMS_RxTelegram.type == EMS_Sys_Status.emsLogging_ID)) {
         _debugPrintTelegram("", &EMS_RxTelegram, COLOR_WHITE, true);
+	// raw printout for log d [id] disabled, moved to _printMessage()   
+//    } else if ((EMS_Sys_Status.emsLogging == EMS_SYS_LOGGING_DEVICE) && ((EMS_RxTelegram.src == EMS_Sys_Status.emsLogging_ID) || (EMS_RxTelegram.dest == EMS_Sys_Status.emsLogging_ID))) {
+//        _debugPrintTelegram("", &EMS_RxTelegram, COLOR_WHITE, true);
     }
 
     // Assume at this point we have something that vaguely resembles a telegram in the format [src] [dest] [type] [offset] [data] [crc]
@@ -929,6 +940,11 @@ void _printMessage(_EMS_RxTelegram * EMS_RxTelegram) {
         if ((src == EMS_SolarModule.device_id) || (dest == EMS_SolarModule.device_id)) {
             _debugPrintTelegram(output_str, EMS_RxTelegram, color_s);
         }
+    } else if (EMS_Sys_Status.emsLogging == EMS_SYS_LOGGING_DEVICE) {
+        // only print ones to/from DeviceID 
+        if ((src == EMS_Sys_Status.emsLogging_ID) || (dest == EMS_Sys_Status.emsLogging_ID)) {
+            _debugPrintTelegram(output_str, EMS_RxTelegram, color_s);
+        }
     } else {
         // always print
         _debugPrintTelegram(output_str, EMS_RxTelegram, color_s);
@@ -1269,6 +1285,19 @@ void _process_MMPLUSStatusMessage(_EMS_RxTelegram * EMS_RxTelegram) {
     _setValue(EMS_RxTelegram, &EMS_Mixing.hc[hc].pumpMod, EMS_OFFSET_MMPLUSStatusMessage_pump_mod);
     _setValue(EMS_RxTelegram, &EMS_Mixing.hc[hc].valveStatus, EMS_OFFSET_MMPLUSStatusMessage_valve_status);
 }
+// Mixer warm water loading - 0x0231, 0x0232
+
+void _process_MMPLUSStatusMessageWW(_EMS_RxTelegram * EMS_RxTelegram) {
+    uint8_t wwc = (EMS_RxTelegram->type - EMS_TYPE_MMPLUSStatusMessage_WWC1); // 0 to 3
+    if (wwc >= EMS_THERMOSTAT_MAXWWC) {
+        return; // invalid type
+    }
+    EMS_Mixing.wwc[wwc].active = true;
+
+    _setValue(EMS_RxTelegram, &EMS_Mixing.wwc[wwc].flowTemp, EMS_OFFSET_MMPLUSStatusMessage_WW_flow_temp);
+    _setValue(EMS_RxTelegram, &EMS_Mixing.wwc[wwc].pumpMod, EMS_OFFSET_MMPLUSStatusMessage_WW_pump_mod);
+    _setValue(EMS_RxTelegram, &EMS_Mixing.wwc[wwc].tempStatus, EMS_OFFSET_MMPLUSStatusMessage_WW_temp_status);
+}
 
 // Mixer - 0xAB
 void _process_MMStatusMessage(_EMS_RxTelegram * EMS_RxTelegram) {
@@ -2859,6 +2888,10 @@ const _EMS_Type EMS_Types[] = {
     // Mixing devices MM10 - MM400
     {EMS_DEVICE_UPDATE_FLAG_MIXING, EMS_TYPE_MMPLUSStatusMessage_HC1, "MMPLUSStatusMessage_HC1", _process_MMPLUSStatusMessage},
     {EMS_DEVICE_UPDATE_FLAG_MIXING, EMS_TYPE_MMPLUSStatusMessage_HC2, "MMPLUSStatusMessage_HC2", _process_MMPLUSStatusMessage},
+    {EMS_DEVICE_UPDATE_FLAG_MIXING, EMS_TYPE_MMPLUSStatusMessage_HC3, "MMPLUSStatusMessage_HC3", _process_MMPLUSStatusMessage},
+    {EMS_DEVICE_UPDATE_FLAG_MIXING, EMS_TYPE_MMPLUSStatusMessage_HC4, "MMPLUSStatusMessage_HC4", _process_MMPLUSStatusMessage},
+    {EMS_DEVICE_UPDATE_FLAG_MIXING, EMS_TYPE_MMPLUSStatusMessage_WWC1, "MMPLUSStatusMessage_WWC1", _process_MMPLUSStatusMessageWW},
+    {EMS_DEVICE_UPDATE_FLAG_MIXING, EMS_TYPE_MMPLUSStatusMessage_WWC2, "MMPLUSStatusMessage_WWC2", _process_MMPLUSStatusMessageWW},
     {EMS_DEVICE_UPDATE_FLAG_MIXING, EMS_TYPE_MMStatusMessage, "MMStatusMessage", _process_MMStatusMessage}
 };
 

src/ems.h

@@ -34,6 +34,7 @@
 
 // thermostat specific
 #define EMS_THERMOSTAT_MAXHC 4     // max number of heating circuits
+#define EMS_THERMOSTAT_MAXWWC 2     // max number of warm water circuits
 #define EMS_THERMOSTAT_DEFAULTHC 1 // default heating circuit is 1
 #define EMS_THERMOSTAT_WRITE_YES true
 #define EMS_THERMOSTAT_WRITE_NO false
@@ -112,9 +113,10 @@ typedef enum {
     EMS_SYS_LOGGING_WATCH,       // watch a specific type ID
     EMS_SYS_LOGGING_BASIC,       // only basic read/write messages
     EMS_SYS_LOGGING_THERMOSTAT,  // only telegrams sent from thermostat
-    EMS_SYS_LOGGING_SOLARMODULE, // only telegrams sent from thermostat
+    EMS_SYS_LOGGING_SOLARMODULE, // only telegrams sent from solarmodule
     EMS_SYS_LOGGING_VERBOSE,     // everything
-    EMS_SYS_LOGGING_JABBER       // lots of debug output...
+    EMS_SYS_LOGGING_JABBER,      // lots of debug output...
+    EMS_SYS_LOGGING_DEVICE       // watch the device ID
 } _EMS_SYS_LOGGING;
 
 // status/counters since last power on
@@ -126,7 +128,7 @@ typedef struct {
     uint16_t         emxCrcErr;                              // CRC errors
     bool             emsPollEnabled;                         // flag enable the response to poll messages
     _EMS_SYS_LOGGING emsLogging;                             // logging
-    uint16_t         emsLogging_typeID;                      // the typeID to watch
+    uint16_t         emsLogging_ID;                          // the type or device ID to watch
     uint8_t          emsRefreshedFlags;                      // fresh data, needs to be pushed out to MQTT
     bool             emsBusConnected;                        // is there an active bus
     uint32_t         emsRxTimestamp;                         // timestamp of last EMS message received
@@ -344,6 +346,15 @@ typedef struct {
     uint8_t  flowSetTemp;
 } _EMS_Mixing_HC;
 
+// Mixing Module per WWC
+typedef struct {
+    uint8_t  wwc;     // warm water circuit 1, 2
+    bool     active; // true if there is data for this WWC
+    uint16_t flowTemp;
+    uint8_t  pumpMod;
+    uint8_t  tempStatus;
+} _EMS_Mixing_WWC;
+
 // Mixer data
 typedef struct {
     uint8_t        device_id;
@@ -353,6 +364,7 @@ typedef struct {
     char           version[10];
     bool           detected;
     _EMS_Mixing_HC hc[EMS_THERMOSTAT_MAXHC]; // array for the 4 heating circuits
+    _EMS_Mixing_WWC wwc[EMS_THERMOSTAT_MAXWWC]; // array for the 2 ww circuits 
 } _EMS_Mixing;
 
 // Solar Module - SM10/SM100/SM200/ISM1

src/ems_devices.h

@@ -46,7 +46,7 @@
 #define EMS_OFFSET_UBAParameterWW_wwtemp 2                  // WW Temperature
 #define EMS_OFFSET_UBAParameterWW_wwactivated 1             // WW Activated
 #define EMS_OFFSET_UBAParameterWW_wwOneTime 0x00            // WW OneTime loading
-#define EMS_OFFSET_UBAParameterWW_wwCirulation 1             // WW circulation
+#define EMS_OFFSET_UBAParameterWW_wwCirulation 1            // WW circulation
 #define EMS_OFFSET_UBAParameterWW_wwComfort 9               // WW is in comfort or eco mode
 #define EMS_VALUE_UBAParameterWW_wwComfort_Hot 0x00         // the value for hot
 #define EMS_VALUE_UBAParameterWW_wwComfort_Eco 0xD8         // the value for eco
@@ -176,9 +176,14 @@
 #define EMS_TYPE_MMPLUSStatusMessage_HC2 0x01D8       // mixer status HC2
 #define EMS_TYPE_MMPLUSStatusMessage_HC3 0x01D9       // mixer status HC3
 #define EMS_TYPE_MMPLUSStatusMessage_HC4 0x01DA       // mixer status HC4
+#define EMS_TYPE_MMPLUSStatusMessage_WWC1 0x0231      // mixer status WWC1
+#define EMS_TYPE_MMPLUSStatusMessage_WWC2 0x0232      // mixer status WWC2
 #define EMS_OFFSET_MMPLUSStatusMessage_flow_temp 3    // flow temperature
 #define EMS_OFFSET_MMPLUSStatusMessage_pump_mod 5     // pump modulation
 #define EMS_OFFSET_MMPLUSStatusMessage_valve_status 2 // valve in percent
+#define EMS_OFFSET_MMPLUSStatusMessage_WW_flow_temp 0    // flow temperature
+#define EMS_OFFSET_MMPLUSStatusMessage_WW_pump_mod 2     // pump on 6, off 0
+#define EMS_OFFSET_MMPLUSStatusMessage_WW_temp_status 11 // 0,1,2
 
 // MM10
 #define EMS_TYPE_MMStatusMessage 0xAB             // mixer status

src/version.h

@@ -1 +1 @@
-#define APP_VERSION "1.9.5b17"
+#define APP_VERSION "1.9.5b17m"