1.2.4

CHANGELOG.md

@@ -5,6 +5,13 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## [1.2.4] 2019-01-03
+
+### Fixed
+
+- RC35 fetching current temp
+- MQTT data max set to 600 and resolved a memory issue
+
 ## [1.2.3] 2019-01-03
 
 ### Fixed

lib/myESP/MyESP.cpp

@@ -193,7 +193,7 @@ void MyESP::mqttUnsubscribe(const char * topic) {
 
 // MQTT Publish
 void MyESP::mqttPublish(const char * topic, const char * payload) {
-    char s[600];
+    char s[MQTT_MAX_SIZE];
     snprintf(s, sizeof(s), "%s%s/%s", MQTT_BASE, _app_hostname, topic);
     // myDebug_P(PSTR("[MQTT] Sending pubish to %s with payload %s"), s, payload);
     mqttClient.publish(s, MQTT_QOS, false, payload);

lib/myESP/MyESP.h

@@ -42,6 +42,7 @@
 #define MQTT_RECONNECT_DELAY_MIN 5000   // Try to reconnect in 5 seconds upon disconnection
 #define MQTT_RECONNECT_DELAY_STEP 5000  // Increase the reconnect delay in 5 seconds after each failed attempt
 #define MQTT_RECONNECT_DELAY_MAX 120000 // Set reconnect time to 2 minutes at most
+#define MQTT_MAX_SIZE 600               // max length of MQTT message
 // Internal MQTT events
 #define MQTT_CONNECT_EVENT 0
 #define MQTT_DISCONNECT_EVENT 1

src/boiler.ino

@@ -100,7 +100,7 @@ command_t PROGMEM project_cmds[] = {
     {"h", "list supported EMS telegram type IDs"},
     {"M", "publish to MQTT"},
     {"Q", "print Tx Queue"},
-    {"U [n]", "do a deep scan of all thermostat messages types, start at n"},
+    {"U [n]", "do a deep scan of all thermostat message types, starting at n"},
     {"P", "toggle EMS Poll response on/off"},
     {"X", "toggle EMS Tx transmission on/off"},
     {"S", "toggle Shower timer on/off"},
@@ -411,10 +411,8 @@ void showInfo() {
 // CRC check is done to see if there are changes in the values since the last send to avoid too much wifi traffic
 void publishValues(bool force) {
     char                  s[20] = {0}; // for formatting strings
-
-    // Boiler values as one JSON object
     StaticJsonBuffer<512> jsonBuffer;
-    char                  data[512];
+    char                  data[MQTT_MAX_SIZE] = {0};
     JsonObject &          rootBoiler          = jsonBuffer.createObject();
     size_t                rlen;
     CRC32                 crc;
@@ -481,6 +479,7 @@ void publishValues(bool force) {
         rootThermostat[THERMOSTAT_CURRTEMP] = _float_to_char(s, EMS_Thermostat.curr_roomTemp);
         rootThermostat[THERMOSTAT_SELTEMP]  = _float_to_char(s, EMS_Thermostat.setpoint_roomTemp);
 
+        // RC20 has different mode settings
         if (ems_getThermostatModel() == EMS_MODEL_RC20) {
             if (EMS_Thermostat.mode == 0) {
                 rootThermostat[THERMOSTAT_MODE] = "low";
@@ -499,6 +498,7 @@ void publishValues(bool force) {
             }
         }
 
+        data[0] = '\0'; // reset data for next package
         rlen    = rootThermostat.measureLength();
         rootThermostat.printTo(data, rlen + 1); // form the json string
 
@@ -619,7 +619,7 @@ void myDebugCallback() {
         systemCheckTimer.detach();
         regularUpdatesTimer.detach();
         scanThermostat_count = (uint8_t)strtol(&cmd[2], 0, 16);
-        myDebug("Doing a deep scan on all message types to the thermometer start at 0x%02. Reboot ESP when finished.", scanThermostat_count);
+        myDebug("Starting a deep message scan on thermometer");
         scanThermostat.attach(SCANTHERMOSTAT_TIME, do_scanThermostat);
         break;
     default:

src/ems.cpp

@@ -993,9 +993,7 @@ void _process_RC30StatusMessage(uint8_t * data, uint8_t length) {
  */
 void _process_RC35StatusMessage(uint8_t * data, uint8_t length) {
     EMS_Thermostat.setpoint_roomTemp = ((float)data[EMS_TYPE_RC35StatusMessage_setpoint]) / (float)2;
-
-    // There is no current room temperature sensor in this telegram
-    EMS_Thermostat.curr_roomTemp = EMS_VALUE_FLOAT_NOTSET;
+    EMS_Thermostat.curr_roomTemp     = _toFloat(EMS_TYPE_RC35StatusMessage_curr, data);
 
     EMS_Sys_Status.emsRefreshed = true; // triggers a send the values back to Home Assistant via MQTT
 }
@@ -1097,7 +1095,6 @@ void _process_Version(uint8_t * data, uint8_t length) {
 
         // if we don't have a thermostat set, use this one
         if (!ems_getThermostatEnabled()) {
-            myDebug("Setting the Thermostat to this one.");
             // set its capabilities
             EMS_Thermostat.model_id        = Model_Types[i].model_id;
             EMS_Thermostat.type_id         = Model_Types[i].type_id;
@@ -1118,7 +1115,6 @@ void _process_Version(uint8_t * data, uint8_t length) {
         }
 
         if (!ems_getBoilerEnabled()) {
-            myDebug("Setting the Boiler to this one.");
             EMS_Boiler.type_id  = Model_Types[i].type_id;
             EMS_Boiler.model_id = Model_Types[i].model_id;
             strlcpy(EMS_Boiler.version, version, sizeof(EMS_Boiler.version));

src/ems.h

@@ -76,6 +76,7 @@
 // RC35 specific
 #define EMS_TYPE_RC35StatusMessage 0x3E       // is an automatic thermostat broadcast giving us temps
 #define EMS_TYPE_RC35StatusMessage_setpoint 2 // desired temp
+#define EMS_TYPE_RC35StatusMessage_curr 3     // current temp
 #define EMS_TYPE_RC35Set 0x3D                 // for setting values like temp and mode (Working mode HC1)
 #define EMS_OFFSET_RC35Set_mode 7             // position of thermostat mode
 #define EMS_OFFSET_RC35Set_temp_day 2         // position of thermostat setpoint temperature for day time

src/version.h

@@ -1,5 +1,5 @@
 #pragma once
 
 #define APP_NAME "EMS-ESP-Boiler"
-#define APP_VERSION "1.2.3"
+#define APP_VERSION "1.2.4"
 #define APP_HOSTNAME "boiler"