#3275

CHANGELOG_LATEST.md

@@ -20,6 +20,9 @@ This release is based on the latest Espressif/Arduino core version 3. It brings
 - new Application Setting "Automatically check for firmware updates", off by default. When enabled EMS-ESP asks emsesp.org for the latest version once a day on its own, otherwise it only asks when the WebUI wants to show it, so an unattended system never contacts emsesp.org
 - Automatically check and convert older 3.8.x filesystem to the new 3.9.0 format
 - heatpump pool: `poolon` (switch, 0x48A), `hppoolon` (pool heating active, 0x488), MP100 `poolshuntset` (0x5C4) and `poolrequest` (0x5BA), shorter pool names
+- `s_16M_P_custom` PlatformIO env that HybridCompiles Arduino/IDF with a trimmed sdkconfig (no Bluetooth, PPP/modem, IP forward/NAPT, ULP, SPI Ethernet, GDBSTUB, FreeRTOS trace, mDNS browse/CLI) and places the UART ISR in IRAM
+- 16MB builds use EMS-ESP's own Arduino/IDF libs from [esp32-arduino-lib-builder](https://github.com/emsesp/esp32-arduino-lib-builder) (`0910-1604-5.5.5`) instead of Tasmota's prebuilt cores
+- optional `ccache` wrapping when it is installed (`scripts/enable_ccache.py`)
 
 ## Fixed
 
@@ -45,6 +48,9 @@ This release is based on the latest Espressif/Arduino core version 3. It brings
 - add 0kW to heat limits [#3262](https://github.com/emsesp/EMS-ESP32/issues/3262), [#3265](https://github.com/emsesp/EMS-ESP32/issues/3265)
 - show temperature value for sensor 0x40 [#3272](https://github.com/emsesp/EMS-ESP32/issues/3272)
 - no EMS bus on custom boards whose interface relies on a pull-up on the Rx line. The newer ESP-IDF no longer enables the internal pull-up on the UART Rx pin, so it is now set explicitly as it was in 3.8 [#3258](https://github.com/emsesp/EMS-ESP32/discussions/3258)
+- Guru Meditation (cache error) on HybridCompile builds when the EMS or console UART ISR ran from flash during a SPI flash read (WiFi power-down, mDNS, NVS). The UART ISR and ringbuf ISR helpers are now in IRAM
+- compile errors against Arduino 3.3.12 from Tasmota/Arduino headers named `console.h`, `network.h` and `httpClient.h`. Those EMS-ESP headers are now `emsesp_console.h`, `emsesp_network.h` and `emsesp_http_client.h`
+- HTTP OTA from WSL/mDNS stalled on IPv6 and used tiny write chunks. Uploads now resolve IPv4 and stream in 64 KB blocks (`scripts/upload.py`, `scripts/upload_cli.py`)
 
 ## Changed
 
@@ -63,3 +69,5 @@ This release is based on the latest Espressif/Arduino core version 3. It brings
 - failed versions.json fetches back off from 5 up to 160 minutes instead of retrying every 5 minutes, as each attempt blocks the main loop for as long as the DNS, connect and read timeouts allow
 - optimized the LED library to support WS2812B V5 and the newer V6 RGB LEDs
 - hold Tx while a K30RF/KM200 gateway is syncing [#3094](https://github.com/emsesp/EMS-ESP32/issues/3094)
+- Tasmota platform 2026.05.50 (Arduino 3.3.8 / IDF 5.5.4) to 2026.09.50 (Arduino 3.3.12 / IDF 5.5.5)
+- CI dev-release firmware jobs run in parallel (webUI, firmware targets, standalone) instead of one serial job

interface/package.json

@@ -45,7 +45,7 @@
     "@types/node": "^26.6.4",
     "@types/react": "^19.3.0",
     "@types/react-dom": "^19.3.0",
-    "concurrently": "^10.0.5",
+    "concurrently": "^10.0.6",
     "eslint": "^10.12.0",
     "eslint-config-prettier": "^10.1.8",
     "etag": "^1.8.1",
@@ -55,7 +55,7 @@
     "terser": "^5.51.2",
     "typescript": "^6.0.3",
     "typescript-eslint": "^8.71.1",
-    "vite": "^8.3.3",
+    "vite": "^8.3.4",
     "vite-plugin-imagemin": "^0.6.1"
   },
   "packageManager": "pnpm@12.10.1"

interface/pnpm-lock.yaml

@@ -214,7 +214,7 @@ importers:
         version: 10.0.1(eslint@10.12.0(supports-color@10.2.2))
       '@preact/preset-vite':
         specifier: ^2.10.6
-        version: 2.10.6(@babel/core@7.29.7(supports-color@10.2.2))(preact@11.0.1)(supports-color@10.2.2)(vite@8.3.3(@types/node@26.6.4)(terser@5.51.2))
+        version: 2.10.6(@babel/core@7.29.7(supports-color@10.2.2))(preact@11.0.1)(supports-color@10.2.2)(vite@8.3.4(@types/node@26.6.4)(terser@5.51.2))
       '@trivago/prettier-plugin-sort-imports':
         specifier: ^6.0.2
         version: 6.0.2(prettier@3.9.9)(supports-color@10.2.2)
@@ -228,8 +228,8 @@ importers:
         specifier: ^19.3.0
         version: 19.3.0(@types/react@19.3.0)
       concurrently:
-        specifier: ^10.0.5
+        specifier: ^10.0.6
-        version: 10.0.5
+        version: 10.0.6
       eslint:
         specifier: ^10.12.0
         version: 10.12.0(supports-color@10.2.2)
@@ -258,11 +258,11 @@ importers:
         specifier: ^8.71.1
         version: 8.71.1(eslint@10.12.0(supports-color@10.2.2))(supports-color@10.2.2)(typescript@6.0.3)
       vite:
-        specifier: ^8.3.3
+        specifier: ^8.3.4
-        version: 8.3.3(@types/node@26.6.4)(terser@5.51.2)
+        version: 8.3.4(@types/node@26.6.4)(terser@5.51.2)
       vite-plugin-imagemin:
         specifier: ^0.6.1
-        version: 0.6.1(supports-color@10.2.2)(vite@8.3.3(@types/node@26.6.4)(terser@5.51.2))
+        version: 0.6.1(supports-color@10.2.2)(vite@8.3.4(@types/node@26.6.4)(terser@5.51.2))
 
 packages:
 
@@ -1004,8 +1004,8 @@ packages:
   base64-js@1.5.1:
     resolution: {integrity: sha512-AKpaYlHn8t4SVbOHCy+b5+KKgvR4vrsD8vbvrbiQJps7fKDTkjkDry6ji0rUJjC0kzbNePLwzxq8iypo41qeWA==}
 
-  baseline-browser-mapping@2.11.27:
+  baseline-browser-mapping@2.11.28:
-    resolution: {integrity: sha512-ElY12DaROGuan+lMmZ8Cvo/ZUbXPe7Enc/9VU/b1T3Kp4dwytRcNdR8DoSJN5SNJT/CuvcCA0DHDVmMOCePdRQ==}
+    resolution: {integrity: sha512-br0LOmjJqr6Rt4AEkadbcNf67Zpo7EPwKsWbjnRrJIa1QYFHQBqM4C7F2WTbV8ahTEcg1Eo+Y0aWjjORInYFyA==}
     engines: {node: '>=6.0.0'}
     hasBin: true
 
@@ -1157,8 +1157,8 @@ packages:
   concat-map@0.0.1:
     resolution: {integrity: sha512-/Srv4dswyQNBfohGpz9o6Yb3Gz3SrUDqBH5rTuhGR7ahtlbYKnVxw2bCFMRljaA7EXHaXZ8wsHdodFvbkhKmqg==}
 
-  concurrently@10.0.5:
+  concurrently@10.0.6:
-    resolution: {integrity: sha512-JaP/CoftUrCcAFW/g//RbgEGwlelnEae6cfBLgH6ZdO6s8jPkn6p9SB9u6pdVxYXoiSnFqseOlHfrEfF82TVOg==}
+    resolution: {integrity: sha512-qgICXXFp2/3nAebRLmxcINKEXM1mLK3ij/y31P02VTs/KIkddIeC05n73DxOXsXMB9LFSqNU1/na3lDlOhcbIw==}
     engines: {node: '>=22'}
     hasBin: true
 
@@ -2318,8 +2318,8 @@ packages:
   node-html-parser@6.1.13:
     resolution: {integrity: sha512-qIsTMOY4C/dAa5Q5vsobRpOOvPfC4pB61UVW2uSwZNUp0QU/jCekTal1vMmbO0DgdHeLUJpv/ARmDqErVxA3Sg==}
 
-  node-releases@2.0.57:
+  node-releases@2.0.58:
-    resolution: {integrity: sha512-kQK9LGGFiHtrWiNhZtA7Qbw17AQz+dmsEKODRIVTXA9+e5MS/2gZEBhYJt13GrAz5/IOZKddH/0Z3TP/Zgo+yw==}
+    resolution: {integrity: sha512-BdiKAgbfRlvfMq/XzO/AF9NPmaA8a+YpLAyAFTVFBj3gARrAIfWvNq7Q7NE4se3KgFu0KkrvQMxTS0XVnsGzHg==}
     engines: {node: '>=18'}
 
   normalize-package-data@2.5.0:
@@ -2768,8 +2768,8 @@ packages:
     resolution: {integrity: sha512-7++dFhtcx3353uBaq8DDR4NuxBetBzC7ZQOhmTQInHEd6bSrXdiEyzCvG07Z44UYdLShWUyXt5M/yhz8ekcb1A==}
     engines: {node: '>=8'}
 
-  shell-quote@1.9.0:
+  shell-quote@1.12.0:
-    resolution: {integrity: sha512-Iov+JwFv/2HcTpcwNMKd8+IWNb8tboQJNQTkAY/LLVK7gGH9jy+LGkVqPxfekHl+yMmiqXszdGWXgkfml7hjqA==}
+    resolution: {integrity: sha512-PcByqNyT/38F2kDNi006HAMRJaULuBzq/FOsw3qdZvX/GA9W/jamDaRskgHjubHiftXK5sIFxLNkvrXUwcof6Q==}
     engines: {node: '>= 0.4'}
 
   signal-exit@3.0.7:
@@ -3057,8 +3057,8 @@ packages:
     peerDependencies:
       vite: 5.x || 6.x || 7.x || 8.x
 
-  vite@8.3.3:
+  vite@8.3.4:
-    resolution: {integrity: sha512-cTAldKPImjg6c+gk48U19POPn3GCBzZwpdsN8ZMEEcbpes+6/wvfqUd0C2y3qYY4wsj8PwgFwrZ/1jBPVttMSg==}
+    resolution: {integrity: sha512-IftLE8phJhdNRIGNEV4JCCvfNScoZQVfcXaN8TQropWGJtOHcu+iAB9pHcuGvmEb/kddw0LBe/jS8ztdC6xdiQ==}
     engines: {node: ^20.19.0 || >=22.12.0}
     hasBin: true
     peerDependencies:
@@ -3591,19 +3591,19 @@ snapshots:
 
   '@popperjs/core@2.11.8': {}
 
-  '@preact/preset-vite@2.10.6(@babel/core@7.29.7(supports-color@10.2.2))(preact@11.0.1)(supports-color@10.2.2)(vite@8.3.3(@types/node@26.6.4)(terser@5.51.2))':
+  '@preact/preset-vite@2.10.6(@babel/core@7.29.7(supports-color@10.2.2))(preact@11.0.1)(supports-color@10.2.2)(vite@8.3.4(@types/node@26.6.4)(terser@5.51.2))':
     dependencies:
       '@babel/core': 7.29.7(supports-color@10.2.2)
       '@babel/plugin-transform-react-jsx': 7.29.7(@babel/core@7.29.7(supports-color@10.2.2))(supports-color@10.2.2)
       '@babel/plugin-transform-react-jsx-development': 7.29.7(@babel/core@7.29.7(supports-color@10.2.2))(supports-color@10.2.2)
-      '@prefresh/vite': 2.4.12(preact@11.0.1)(supports-color@10.2.2)(vite@8.3.3(@types/node@26.6.4)(terser@5.51.2))
+      '@prefresh/vite': 2.4.12(preact@11.0.1)(supports-color@10.2.2)(vite@8.3.4(@types/node@26.6.4)(terser@5.51.2))
       '@rollup/pluginutils': 5.4.0
       babel-plugin-transform-hook-names: 1.0.2(@babel/core@7.29.7(supports-color@10.2.2))
       debug: 4.4.3(supports-color@10.2.2)
       magic-string: 0.30.21
       picocolors: 1.1.1
-      vite: 8.3.3(@types/node@26.6.4)(terser@5.51.2)
+      vite: 8.3.4(@types/node@26.6.4)(terser@5.51.2)
-      vite-prerender-plugin: 0.5.14(vite@8.3.3(@types/node@26.6.4)(terser@5.51.2))
+      vite-prerender-plugin: 0.5.14(vite@8.3.4(@types/node@26.6.4)(terser@5.51.2))
       zimmerframe: 1.1.5
     transitivePeerDependencies:
       - preact
@@ -3620,7 +3620,7 @@ snapshots:
 
   '@prefresh/utils@1.2.1': {}
 
-  '@prefresh/vite@2.4.12(preact@11.0.1)(supports-color@10.2.2)(vite@8.3.3(@types/node@26.6.4)(terser@5.51.2))':
+  '@prefresh/vite@2.4.12(preact@11.0.1)(supports-color@10.2.2)(vite@8.3.4(@types/node@26.6.4)(terser@5.51.2))':
     dependencies:
       '@babel/core': 7.29.7(supports-color@10.2.2)
       '@prefresh/babel-plugin': 0.5.4(@babel/core@7.29.7(supports-color@10.2.2))
@@ -3628,7 +3628,7 @@ snapshots:
       '@prefresh/utils': 1.2.1
       '@rollup/pluginutils': 4.2.1
       preact: 11.0.1
-      vite: 8.3.3(@types/node@26.6.4)(terser@5.51.2)
+      vite: 8.3.4(@types/node@26.6.4)(terser@5.51.2)
     transitivePeerDependencies:
       - supports-color
 
@@ -3942,7 +3942,7 @@ snapshots:
 
   base64-js@1.5.1: {}
 
-  baseline-browser-mapping@2.11.27: {}
+  baseline-browser-mapping@2.11.28: {}
 
   bin-build@3.0.0:
     dependencies:
@@ -4003,10 +4003,10 @@ snapshots:
 
   browserslist@4.29.3:
     dependencies:
-      baseline-browser-mapping: 2.11.27
+      baseline-browser-mapping: 2.11.28
       caniuse-lite: 1.0.30001815
       electron-to-chromium: 1.5.451
-      node-releases: 2.0.57
+      node-releases: 2.0.58
       update-browserslist-db: 1.3.4(browserslist@4.29.3)
 
   buffer-alloc-unsafe@1.1.0: {}
@@ -4125,11 +4125,11 @@ snapshots:
 
   concat-map@0.0.1: {}
 
-  concurrently@10.0.5:
+  concurrently@10.0.6:
     dependencies:
       chalk: 5.6.2
       rxjs: 7.8.2
-      shell-quote: 1.9.0
+      shell-quote: 1.12.0
       supports-color: 10.2.2
       tree-kill: 1.2.2
       yargs: 18.0.0
@@ -5307,7 +5307,7 @@ snapshots:
       css-select: 5.2.2
       he: 1.2.0
 
-  node-releases@2.0.57: {}
+  node-releases@2.0.58: {}
 
   normalize-package-data@2.5.0:
     dependencies:
@@ -5724,7 +5724,7 @@ snapshots:
 
   shebang-regex@3.0.0: {}
 
-  shell-quote@1.9.0: {}
+  shell-quote@1.12.0: {}
 
   signal-exit@3.0.7: {}
 
@@ -5982,7 +5982,7 @@ snapshots:
       spdx-correct: 3.2.0
       spdx-expression-parse: 3.0.1
 
-  vite-plugin-imagemin@0.6.1(supports-color@10.2.2)(vite@8.3.3(@types/node@26.6.4)(terser@5.51.2)):
+  vite-plugin-imagemin@0.6.1(supports-color@10.2.2)(vite@8.3.4(@types/node@26.6.4)(terser@5.51.2)):
     dependencies:
       '@types/imagemin': 7.0.1
       '@types/imagemin-gifsicle': 7.0.4
@@ -6007,11 +6007,11 @@ snapshots:
       imagemin-webp: 6.1.0
       jpegtran-bin: 6.0.1
       pathe: 0.2.0
-      vite: 8.3.3(@types/node@26.6.4)(terser@5.51.2)
+      vite: 8.3.4(@types/node@26.6.4)(terser@5.51.2)
     transitivePeerDependencies:
       - supports-color
 
-  vite-prerender-plugin@0.5.14(vite@8.3.3(@types/node@26.6.4)(terser@5.51.2)):
+  vite-prerender-plugin@0.5.14(vite@8.3.4(@types/node@26.6.4)(terser@5.51.2)):
     dependencies:
       kolorist: 1.8.0
       magic-string: 0.30.21
@@ -6019,9 +6019,9 @@ snapshots:
       simple-code-frame: 1.3.0
       source-map: 0.7.6
       stack-trace: 1.0.0
-      vite: 8.3.3(@types/node@26.6.4)(terser@5.51.2)
+      vite: 8.3.4(@types/node@26.6.4)(terser@5.51.2)
 
-  vite@8.3.3(@types/node@26.6.4)(terser@5.51.2):
+  vite@8.3.4(@types/node@26.6.4)(terser@5.51.2):
     dependencies:
       lightningcss: 1.33.0
       picomatch: 4.0.7

platformio.ini

@@ -65,15 +65,15 @@ framework = arduino
 board_build.partitions = partitions/esp32_partition_4M.csv
 board_upload.flash_size = 4MB
 board_build.app_partition_name = app0
-platform = https://github.com/tasmota/platform-espressif32/releases/download/2026.09.50/platform-espressif32.zip ; Tasmota Arduino Core 3.3.12 based on IDF 5.5.5
+platform = https://github.com/tasmota/platform-espressif32/releases/download/2026.09.50/platform-espressif32.zip ; Arduino Core 3.3.12 based on IDF 5.5.5
 
-; 16MB Flash variants - using EMS-ESP Arduino/IDF libs (not Tasmota)
+; 16MB Flash variants
 [espressif32_base_16M]
 framework = arduino
 board_build.partitions = partitions/esp32_partition_16M.csv
 board_upload.flash_size = 16MB
 board_build.app_partition_name = app0
-platform = https://github.com/tasmota/platform-espressif32/releases/download/2026.09.50/platform-espressif32.zip ; Tasmota Arduino Core 3.3.12 based on IDF 5.5.5
+platform = https://github.com/tasmota/platform-espressif32/releases/download/2026.09.50/platform-espressif32.zip ; Arduino Core 3.3.12 based on IDF 5.5.5
 platform_packages = framework-arduinoespressif32 @ https://github.com/emsesp/esp32-arduino-lib-builder/releases/download/0910-1604-5.5.5/framework-arduinoespressif32-v5.5.5-a63b839f.tar.xz
 
 ; 32MB Flash variants
@@ -82,7 +82,7 @@ framework = arduino
 board_build.partitions = partitions/esp32_partition_32M.csv
 board_upload.flash_size = 32MB
 board_build.app_partition_name = app0
-platform = https://github.com/tasmota/platform-espressif32/releases/download/2026.09.50/platform-espressif32.zip ; Tasmota Arduino Core 3.3.12 based on IDF 5.5.5
+platform = https://github.com/tasmota/platform-espressif32/releases/download/2026.09.50/platform-espressif32.zip ; Arduino Core 3.3.12 based on IDF 5.5.5
 
 [env]
 build_flags =
@@ -155,9 +155,6 @@ custom_sdkconfig =
   '# CONFIG_MDNS_ENABLE_CONSOLE_CLI is not set'
   '# CONFIG_MDNS_ENABLE_BROWSE is not set'
   '# CONFIG_I2S_ISR_IRAM_SAFE is not set'
-  ; UART ISR must live in IRAM. Tasmota puts ringbuf ISRs in flash, which
-  ; forces CONFIG_UART_ISR_IN_IRAM=n and panics (Cache error) when the EMS
-  ; or console UART fires during a flash read (WiFi stop / mDNS / NVS).
   '# CONFIG_RINGBUF_PLACE_ISR_FUNCTIONS_INTO_FLASH is not set'
   'CONFIG_UART_ISR_IN_IRAM=y'