diff --git a/Modbus-Entity-Registers.md b/Modbus-Entity-Registers.md
deleted file mode 100644
index 16fd715c7..000000000
--- a/Modbus-Entity-Registers.md
+++ /dev/null
@@ -1,8512 +0,0 @@
----
-id: Modbus-Entity-Registers
----
-# Modbus Entity/Register Mapping
-
-:::warning
-This file has been auto-generated. Do not modify.
-:::
-
-## Devices of type \_boiler
-
-### CS5800i, CS6800i, WLW176i, WLW186i
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| mandefrost | manual defrost | cmd |   | true | DEVICE_DATA | 88 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-| dhw.nrg | energy | uint24 | kWh | false | DHW | 0 | 2 | 1/100 |
-| nrgheat | energy heating | uint24 | kWh | false | DEVICE_DATA | 91 | 2 | 1/100 |
-| nrgcool | energy cooling | uint24 | kWh | false | DEVICE_DATA | 93 | 2 | 1/100 |
-| metertotal | meter total | uint24 | kWh | false | DEVICE_DATA | 95 | 2 | 1/100 |
-| metercomp | meter compressor | uint24 | kWh | false | DEVICE_DATA | 97 | 2 | 1/100 |
-| metereheat | meter e-heater | uint24 | kWh | false | DEVICE_DATA | 99 | 2 | 1/100 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/100 |
-| metercool | meter cooling | uint24 | kWh | false | DEVICE_DATA | 103 | 2 | 1/100 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/100 |
-| uptimetotal | heatpump total uptime | time | minutes | false | DEVICE_DATA | 105 | 2 | 1/60 |
-| uptimecontrol | total operating time heat | time | minutes | false | DEVICE_DATA | 107 | 2 | 1/60 |
-| uptimecompheating | operating time compressor heating | time | minutes | false | DEVICE_DATA | 109 | 2 | 1/60 |
-| uptimecompcooling | operating time compressor cooling | time | minutes | false | DEVICE_DATA | 111 | 2 | 1/60 |
-| dhw.uptimecomp | operating time compressor | time | minutes | false | DHW | 4 | 2 | 1/60 |
-| uptimecomppool | operating time compressor pool | time | minutes | false | DEVICE_DATA | 113 | 2 | 1/60 |
-| totalcompstarts | total compressor control starts | uint24 |   | false | DEVICE_DATA | 115 | 2 | 1 |
-| heatingstarts | heating control starts | uint24 |   | false | DEVICE_DATA | 117 | 2 | 1 |
-| coolingstarts | cooling control starts | uint24 |   | false | DEVICE_DATA | 119 | 2 | 1 |
-| dhw.startshp | starts hp | uint24 |   | false | DHW | 6 | 2 | 1 |
-| poolstarts | pool control starts | uint24 |   | false | DEVICE_DATA | 121 | 2 | 1 |
-| nrgconstotal | total energy consumption | uint24 | kWh | false | DEVICE_DATA | 123 | 2 | 1 |
-| nrgconscomptotal | total energy consumption compressor | uint24 | kWh | false | DEVICE_DATA | 125 | 2 | 1 |
-| nrgconscompheating | energy consumption compressor heating | uint24 | kWh | false | DEVICE_DATA | 127 | 2 | 1 |
-| dhw.nrgconscomp | energy consumption compressor | uint24 | kWh | false | DHW | 8 | 2 | 1 |
-| nrgconscompcooling | energy consumption compressor cooling | uint24 | kWh | false | DEVICE_DATA | 129 | 2 | 1 |
-| nrgconscomppool | energy consumption compressor pool | uint24 | kWh | false | DEVICE_DATA | 131 | 2 | 1 |
-| auxelecheatnrgconstotal | total aux elec. heater energy consumption | uint24 | kWh | false | DEVICE_DATA | 133 | 2 | 1 |
-| auxelecheatnrgconsheating | aux elec. heater energy consumption heating | uint24 | kWh | false | DEVICE_DATA | 135 | 2 | 1 |
-| dhw.auxelecheatnrgcons | aux elec. heater energy consumption | uint24 | kWh | false | DHW | 10 | 2 | 1 |
-| auxelecheatnrgconspool | aux elec. heater energy consumption pool | uint24 | kWh | false | DEVICE_DATA | 137 | 2 | 1 |
-| nrgsupptotal | total energy supplied | uint24 | kWh | false | DEVICE_DATA | 139 | 2 | 1 |
-| nrgsuppheating | total energy supplied heating | uint24 | kWh | false | DEVICE_DATA | 141 | 2 | 1 |
-| dhw.nrgsupp | total energy warm supplied | uint24 | kWh | false | DHW | 12 | 2 | 1 |
-| nrgsuppcooling | total energy supplied cooling | uint24 | kWh | false | DEVICE_DATA | 143 | 2 | 1 |
-| nrgsupppool | total energy supplied pool | uint24 | kWh | false | DEVICE_DATA | 145 | 2 | 1 |
-| hppower | compressor power output | uint16 | kW | false | DEVICE_DATA | 147 | 1 | 1/10 |
-uint8
-| hpmaxpower | compressor max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 148 | 1 | 1 |
-uint8
-| pvmaxcomp | pv compressor max power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 149 | 1 | 1/10 |
-uint8
-| powerreduction | power reduction | uint8 (>=30<=60) | % | true | DEVICE_DATA | 150 | 1 | 10 |
-uint8
-| hpsetdiffpress | set differential pressure | uint8 (>=150<=750) | mbar | true | DEVICE_DATA | 151 | 1 | 50 |
-| hpcompon | hp compressor | boolean |   | false | DEVICE_DATA | 152 | 1 | 1 |
-| hpactivity | compressor activity | enum |   | false | DEVICE_DATA | 153 | 1 | 1 |
-| hppoolon | hp pool | boolean |   | false | DEVICE_DATA | 154 | 1 | 1 |
-| hpbrinepumpspd | brine pump speed | uint8 | % | false | DEVICE_DATA | 155 | 1 | 1 |
-| hpswitchvalve | switch valve | boolean |   | false | DEVICE_DATA | 156 | 1 | 1 |
-| hpcompspd | compressor speed | uint8 | % | false | DEVICE_DATA | 157 | 1 | 1 |
-| hptargetspd | compressor target speed | uint8 | % | false | DEVICE_DATA | 158 | 1 | 1 |
-| hpcircspd | circulation pump speed | uint8 | % | false | DEVICE_DATA | 159 | 1 | 1 |
-| recvalve | receiver valve VR0 | uint8 | % | false | DEVICE_DATA | 160 | 1 | 1 |
-| expvalve | expansion valve VR1 | uint8 | % | false | DEVICE_DATA | 161 | 1 | 1 |
-| hpbrinein | brine in/evaporator | int16 | C | false | DEVICE_DATA | 162 | 1 | 1/10 |
-| hpbrineout | brine out/condenser | int16 | C | false | DEVICE_DATA | 163 | 1 | 1/10 |
-| hptc0 | heat carrier return (TC0) | int16 | C | false | DEVICE_DATA | 164 | 1 | 1/10 |
-| hptc1 | heat carrier forward (TC1) | int16 | C | false | DEVICE_DATA | 165 | 1 | 1/10 |
-| hptc3 | condenser temperature (TC3) | int16 | C | false | DEVICE_DATA | 166 | 1 | 1/10 |
-| hptr1 | compressor temperature (TR1) | int16 | C | false | DEVICE_DATA | 167 | 1 | 1/10 |
-| hptr3 | refrigerant temperature liquid side (condenser output) (TR3) | int16 | C | false | DEVICE_DATA | 168 | 1 | 1/10 |
-| hptr4 | evaporator inlet temperature (TR4) | int16 | C | false | DEVICE_DATA | 169 | 1 | 1/10 |
-| hptr5 | compressor inlet temperature (TR5) | int16 | C | false | DEVICE_DATA | 170 | 1 | 1/10 |
-| hptr6 | compressor outlet temperature (TR6) | int16 | C | false | DEVICE_DATA | 171 | 1 | 1/10 |
-| hptr7 | refrigerant temperature gas side (condenser input) (TR7) | int16 | C | false | DEVICE_DATA | 172 | 1 | 1/10 |
-| hptl2 | air inlet temperature (TL2) | int16 | C | false | DEVICE_DATA | 173 | 1 | 1/10 |
-| hppl1 | low pressure side temperature (PL1) | int16 | C | false | DEVICE_DATA | 174 | 1 | 1/10 |
-| hpph1 | high pressure side temperature (PH1) | int16 | C | false | DEVICE_DATA | 175 | 1 | 1/10 |
-| hpta4 | drain pan temp (TA4) | int16 | C | false | DEVICE_DATA | 176 | 1 | 1/10 |
-| hptw1 | reservoir temp (TW1) | int16 | C | false | DEVICE_DATA | 177 | 1 | 1/10 |
-| poolon | pool on | boolean |   | true | DEVICE_DATA | 178 | 1 | 1 |
-uint8
-| poolsettemp | pool setpoint | uint8 (>=0<=0) | C | true | DEVICE_DATA | 179 | 1 | 1/2 |
-| hp4way | 4-way valve (VR4) | boolean |   | false | DEVICE_DATA | 180 | 1 | 1 |
-| hpin1 | input 1 state | boolean |   | false | DEVICE_DATA | 181 | 1 | 1 |
-| hpin1opt | input 1 options | string |   | true | DEVICE_DATA | 182 | 8 | 1 |
-| hpin2 | input 2 state | boolean |   | false | DEVICE_DATA | 190 | 1 | 1 |
-| hpin2opt | input 2 options | string |   | true | DEVICE_DATA | 191 | 8 | 1 |
-| hpin3 | input 3 state | boolean |   | false | DEVICE_DATA | 199 | 1 | 1 |
-| hpin3opt | input 3 options | string |   | true | DEVICE_DATA | 200 | 8 | 1 |
-| hpin4 | input 4 state | boolean |   | false | DEVICE_DATA | 208 | 1 | 1 |
-| hpin4opt | input 4 options | string |   | true | DEVICE_DATA | 209 | 8 | 1 |
-| maxheatcomp | heat limit compressor | enum |   | true | DEVICE_DATA | 217 | 1 | 1 |
-| maxheatheat | heat limit heating | enum |   | true | DEVICE_DATA | 218 | 1 | 1 |
-| dhw.maxheat | heat limit | enum |   | true | DHW | 14 | 1 | 1 |
-| auxheatersource | aux heater source | enum |   | true | DEVICE_DATA | 219 | 1 | 1 |
-| pvcooling | cooling only with PV | boolean |   | true | DEVICE_DATA | 220 | 1 | 1 |
-| auxheateronly | aux heater only | boolean |   | true | DEVICE_DATA | 221 | 1 | 1 |
-| auxheateroff | disable aux heater | boolean |   | true | DEVICE_DATA | 222 | 1 | 1 |
-| auxheaterstatus | aux heater status | enum |   | false | DEVICE_DATA | 223 | 1 | 1 |
-| auxheaterlevel | aux heater level | uint8 | % | false | DEVICE_DATA | 224 | 1 | 1 |
-uint16
-| auxheaterdelay | aux heater on delay | uint16 (>=10<=1000) | K*min | true | DEVICE_DATA | 225 | 1 | 10 |
-uint8
-| auxmaxlimit | aux heater max limit | uint8 (>=0<=10) | K | true | DEVICE_DATA | 226 | 1 | 1/10 |
-uint8
-| auxlimitstart | aux heater limit start | uint8 (>=0<=10) | K | true | DEVICE_DATA | 227 | 1 | 1/10 |
-| auxheatrmode | aux heater mode | enum |   | true | DEVICE_DATA | 228 | 1 | 1 |
-uint16
-| hphystheat | on/off hyst heat | uint16 (>=50<=1500) | K*min | true | DEVICE_DATA | 229 | 1 | 5 |
-uint16
-| hphystcool | on/off hyst cool | uint16 (>=50<=1500) | K*min | true | DEVICE_DATA | 230 | 1 | 5 |
-uint16
-| hphystpool | on/off hyst pool | uint16 (>=50<=1500) | K*min | true | DEVICE_DATA | 231 | 1 | 5 |
-| silentmode | silent mode | enum |   | true | DEVICE_DATA | 232 | 1 | 1 |
-uint8
-| silentfrom | silent mode from | uint8 (>=0<=0) | minutes | true | DEVICE_DATA | 233 | 1 | 15 |
-uint8
-| silentto | silent mode to | uint8 (>=0<=0) | minutes | true | DEVICE_DATA | 234 | 1 | 15 |
-int8
-| mintempsilent | min outside temp for silent mode | int8 (>=0<=0) | C | true | DEVICE_DATA | 235 | 1 | 1 |
-int8
-| tempparmode | outside temp parallel mode | int8 (>=0<=0) | C | true | DEVICE_DATA | 236 | 1 | 1 |
-| auxheatmix | aux heater mixing valve | int8 | % | false | DEVICE_DATA | 237 | 1 | 1 |
-uint8
-| tempdiffheat | temp diff TC3/TC0 heat | uint8 (>=2<=10) | K | true | DEVICE_DATA | 238 | 1 | 1/10 |
-uint8
-| tempdiffcool | temp diff TC3/TC0 cool | uint8 (>=2<=10) | K | true | DEVICE_DATA | 239 | 1 | 1/10 |
-| vpcooling | valve/pump cooling | boolean |   | true | DEVICE_DATA | 240 | 1 | 1 |
-| heatcable | heating cable | boolean |   | true | DEVICE_DATA | 241 | 1 | 1 |
-| vc0valve | VC0 valve | boolean |   | true | DEVICE_DATA | 242 | 1 | 1 |
-| primepump | primary heatpump | boolean |   | true | DEVICE_DATA | 243 | 1 | 1 |
-uint8
-| primepumpmod | primary heatpump modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 244 | 1 | 1 |
-| hp3way | 3-way valve | boolean |   | true | DEVICE_DATA | 245 | 1 | 1 |
-| elheatstep1 | el. heater step 1 | boolean |   | true | DEVICE_DATA | 246 | 1 | 1 |
-| elheatstep2 | el. heater step 2 | boolean |   | true | DEVICE_DATA | 247 | 1 | 1 |
-| elheatstep3 | el. heater step 3 | boolean |   | true | DEVICE_DATA | 248 | 1 | 1 |
-| hpea0 | condensate reservoir heating (EA0) | boolean |   | false | DEVICE_DATA | 249 | 1 | 1 |
-| hppumpmode | primary heatpump mode | enum |   | true | DEVICE_DATA | 250 | 1 | 1 |
-uint8
-| fan | fan | uint8 (>=20<=100) | % | true | DEVICE_DATA | 251 | 1 | 1 |
-| fanspd | fan speed | uint8 | % | false | DEVICE_DATA | 252 | 1 | 1 |
-| shutdown | shutdown | cmd |   | true | DEVICE_DATA | 253 | 1 | 1 |
-| hpcurrpower | compressor current power | uint16 | W | false | DEVICE_DATA | 254 | 1 | 1 |
-uint16
-| hppowerlimit | power limit | uint16 (>=0<=0) | W | true | DEVICE_DATA | 255 | 1 | 1 |
-| dhw.alternatingop | alternating operation | boolean |   | true | DHW | 15 | 1 | 1 |
-uint8
-| dhw.altopprioheat | prioritise heating during dhw | uint8 (>=20<=120) | minutes | true | DHW | 16 | 1 | 1 |
-uint8
-| dhw.altopprio | prioritise dhw during heating | uint8 (>=30<=120) | minutes | true | DHW | 17 | 1 | 1 |
-uint8
-| dhw.comfoff | comfort switch off | uint8 (>=15<=65) | C | true | DHW | 18 | 1 | 1 |
-uint8
-| dhw.ecooff | eco switch off | uint8 (>=15<=65) | C | true | DHW | 19 | 1 | 1 |
-uint8
-| dhw.ecoplusoff | eco+ switch off | uint8 (>=48<=63) | C | true | DHW | 20 | 1 | 1 |
-uint8
-| dhw.comfdiff | comfort diff | uint8 (>=4<=18) | K | true | DHW | 21 | 1 | 1 |
-uint8
-| dhw.ecodiff | eco diff | uint8 (>=4<=18) | K | true | DHW | 22 | 1 | 1 |
-uint8
-| dhw.ecoplusdiff | eco+ diff | uint8 (>=4<=15) | K | true | DHW | 23 | 1 | 1 |
-uint8
-| dhw.comfstop | comfort stop temp | uint8 (>=0<=0) | C | true | DHW | 24 | 1 | 1 |
-uint8
-| dhw.ecostop | eco stop temp | uint8 (>=0<=0) | C | true | DHW | 25 | 1 | 1 |
-uint8
-| dhw.ecoplusstop | eco+ stop temp | uint8 (>=0<=0) | C | true | DHW | 26 | 1 | 1 |
-| dhw.hpcircpump | circulation pump available during dhw | boolean |   | true | DHW | 27 | 1 | 1 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-uint8
-| dhw.disinfectduration | disinfection duration | uint8 (>=120<=240) | minutes | true | DHW | 48 | 1 | 10 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-
-### Greenstar 2000
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### C1200W
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### CS5800iG
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### BK13/BK15, Smartline, GB1*2
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Logano GB1*5, Logamatic MC10
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Cascade CM10
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Logamax Plus GB022
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Condens, Logamax/Logomatic, Cerapur Top, Greenstar, Generic HT3
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Topline, GB162
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Cascade MCM10
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Proline
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### GB*72, Trendline, Cerapur, Greenstar Si
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### GB212
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### GC7000F
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Logano GB125/KB195i, Logamatic MC110
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Greenstar 30Ri Compact
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Suprapur-o
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Cerapur Aero
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Hybrid Heatpump
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Logano GB212
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Enviline, Compress 6000AW, Hybrid 3000-7000iAW, SupraEco/Geo 5xx, WLW196i/WSW196i
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| mandefrost | manual defrost | cmd |   | true | DEVICE_DATA | 88 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-| dhw.nrg | energy | uint24 | kWh | false | DHW | 0 | 2 | 1/100 |
-| nrgheat | energy heating | uint24 | kWh | false | DEVICE_DATA | 91 | 2 | 1/100 |
-| nrgcool | energy cooling | uint24 | kWh | false | DEVICE_DATA | 93 | 2 | 1/100 |
-| metertotal | meter total | uint24 | kWh | false | DEVICE_DATA | 95 | 2 | 1/100 |
-| metercomp | meter compressor | uint24 | kWh | false | DEVICE_DATA | 97 | 2 | 1/100 |
-| metereheat | meter e-heater | uint24 | kWh | false | DEVICE_DATA | 99 | 2 | 1/100 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/100 |
-| metercool | meter cooling | uint24 | kWh | false | DEVICE_DATA | 103 | 2 | 1/100 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/100 |
-| uptimetotal | heatpump total uptime | time | minutes | false | DEVICE_DATA | 105 | 2 | 1/60 |
-| uptimecontrol | total operating time heat | time | minutes | false | DEVICE_DATA | 107 | 2 | 1/60 |
-| uptimecompheating | operating time compressor heating | time | minutes | false | DEVICE_DATA | 109 | 2 | 1/60 |
-| uptimecompcooling | operating time compressor cooling | time | minutes | false | DEVICE_DATA | 111 | 2 | 1/60 |
-| dhw.uptimecomp | operating time compressor | time | minutes | false | DHW | 4 | 2 | 1/60 |
-| uptimecomppool | operating time compressor pool | time | minutes | false | DEVICE_DATA | 113 | 2 | 1/60 |
-| totalcompstarts | total compressor control starts | uint24 |   | false | DEVICE_DATA | 115 | 2 | 1 |
-| heatingstarts | heating control starts | uint24 |   | false | DEVICE_DATA | 117 | 2 | 1 |
-| coolingstarts | cooling control starts | uint24 |   | false | DEVICE_DATA | 119 | 2 | 1 |
-| dhw.startshp | starts hp | uint24 |   | false | DHW | 6 | 2 | 1 |
-| poolstarts | pool control starts | uint24 |   | false | DEVICE_DATA | 121 | 2 | 1 |
-| nrgconstotal | total energy consumption | uint24 | kWh | false | DEVICE_DATA | 123 | 2 | 1 |
-| nrgconscomptotal | total energy consumption compressor | uint24 | kWh | false | DEVICE_DATA | 125 | 2 | 1 |
-| nrgconscompheating | energy consumption compressor heating | uint24 | kWh | false | DEVICE_DATA | 127 | 2 | 1 |
-| dhw.nrgconscomp | energy consumption compressor | uint24 | kWh | false | DHW | 8 | 2 | 1 |
-| nrgconscompcooling | energy consumption compressor cooling | uint24 | kWh | false | DEVICE_DATA | 129 | 2 | 1 |
-| nrgconscomppool | energy consumption compressor pool | uint24 | kWh | false | DEVICE_DATA | 131 | 2 | 1 |
-| auxelecheatnrgconstotal | total aux elec. heater energy consumption | uint24 | kWh | false | DEVICE_DATA | 133 | 2 | 1 |
-| auxelecheatnrgconsheating | aux elec. heater energy consumption heating | uint24 | kWh | false | DEVICE_DATA | 135 | 2 | 1 |
-| dhw.auxelecheatnrgcons | aux elec. heater energy consumption | uint24 | kWh | false | DHW | 10 | 2 | 1 |
-| auxelecheatnrgconspool | aux elec. heater energy consumption pool | uint24 | kWh | false | DEVICE_DATA | 137 | 2 | 1 |
-| nrgsupptotal | total energy supplied | uint24 | kWh | false | DEVICE_DATA | 139 | 2 | 1 |
-| nrgsuppheating | total energy supplied heating | uint24 | kWh | false | DEVICE_DATA | 141 | 2 | 1 |
-| dhw.nrgsupp | total energy warm supplied | uint24 | kWh | false | DHW | 12 | 2 | 1 |
-| nrgsuppcooling | total energy supplied cooling | uint24 | kWh | false | DEVICE_DATA | 143 | 2 | 1 |
-| nrgsupppool | total energy supplied pool | uint24 | kWh | false | DEVICE_DATA | 145 | 2 | 1 |
-| hppower | compressor power output | uint16 | kW | false | DEVICE_DATA | 147 | 1 | 1/10 |
-uint8
-| hpmaxpower | compressor max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 148 | 1 | 1 |
-uint8
-| pvmaxcomp | pv compressor max power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 149 | 1 | 1/10 |
-uint8
-| powerreduction | power reduction | uint8 (>=30<=60) | % | true | DEVICE_DATA | 150 | 1 | 10 |
-uint8
-| hpsetdiffpress | set differential pressure | uint8 (>=150<=750) | mbar | true | DEVICE_DATA | 151 | 1 | 50 |
-| hpcompon | hp compressor | boolean |   | false | DEVICE_DATA | 152 | 1 | 1 |
-| hpactivity | compressor activity | enum |   | false | DEVICE_DATA | 153 | 1 | 1 |
-| hppoolon | hp pool | boolean |   | false | DEVICE_DATA | 154 | 1 | 1 |
-| hpbrinepumpspd | brine pump speed | uint8 | % | false | DEVICE_DATA | 155 | 1 | 1 |
-| hpswitchvalve | switch valve | boolean |   | false | DEVICE_DATA | 156 | 1 | 1 |
-| hpcompspd | compressor speed | uint8 | % | false | DEVICE_DATA | 157 | 1 | 1 |
-| hptargetspd | compressor target speed | uint8 | % | false | DEVICE_DATA | 158 | 1 | 1 |
-| hpcircspd | circulation pump speed | uint8 | % | false | DEVICE_DATA | 159 | 1 | 1 |
-| recvalve | receiver valve VR0 | uint8 | % | false | DEVICE_DATA | 160 | 1 | 1 |
-| expvalve | expansion valve VR1 | uint8 | % | false | DEVICE_DATA | 161 | 1 | 1 |
-| hpbrinein | brine in/evaporator | int16 | C | false | DEVICE_DATA | 162 | 1 | 1/10 |
-| hpbrineout | brine out/condenser | int16 | C | false | DEVICE_DATA | 163 | 1 | 1/10 |
-| hptc0 | heat carrier return (TC0) | int16 | C | false | DEVICE_DATA | 164 | 1 | 1/10 |
-| hptc1 | heat carrier forward (TC1) | int16 | C | false | DEVICE_DATA | 165 | 1 | 1/10 |
-| hptc3 | condenser temperature (TC3) | int16 | C | false | DEVICE_DATA | 166 | 1 | 1/10 |
-| hptr1 | compressor temperature (TR1) | int16 | C | false | DEVICE_DATA | 167 | 1 | 1/10 |
-| hptr3 | refrigerant temperature liquid side (condenser output) (TR3) | int16 | C | false | DEVICE_DATA | 168 | 1 | 1/10 |
-| hptr4 | evaporator inlet temperature (TR4) | int16 | C | false | DEVICE_DATA | 169 | 1 | 1/10 |
-| hptr5 | compressor inlet temperature (TR5) | int16 | C | false | DEVICE_DATA | 170 | 1 | 1/10 |
-| hptr6 | compressor outlet temperature (TR6) | int16 | C | false | DEVICE_DATA | 171 | 1 | 1/10 |
-| hptr7 | refrigerant temperature gas side (condenser input) (TR7) | int16 | C | false | DEVICE_DATA | 172 | 1 | 1/10 |
-| hptl2 | air inlet temperature (TL2) | int16 | C | false | DEVICE_DATA | 173 | 1 | 1/10 |
-| hppl1 | low pressure side temperature (PL1) | int16 | C | false | DEVICE_DATA | 174 | 1 | 1/10 |
-| hpph1 | high pressure side temperature (PH1) | int16 | C | false | DEVICE_DATA | 175 | 1 | 1/10 |
-| hpta4 | drain pan temp (TA4) | int16 | C | false | DEVICE_DATA | 176 | 1 | 1/10 |
-| hptw1 | reservoir temp (TW1) | int16 | C | false | DEVICE_DATA | 177 | 1 | 1/10 |
-| poolon | pool on | boolean |   | true | DEVICE_DATA | 178 | 1 | 1 |
-uint8
-| poolsettemp | pool setpoint | uint8 (>=0<=0) | C | true | DEVICE_DATA | 179 | 1 | 1/2 |
-| hp4way | 4-way valve (VR4) | boolean |   | false | DEVICE_DATA | 180 | 1 | 1 |
-| hpin1 | input 1 state | boolean |   | false | DEVICE_DATA | 181 | 1 | 1 |
-| hpin1opt | input 1 options | string |   | true | DEVICE_DATA | 182 | 8 | 1 |
-| hpin2 | input 2 state | boolean |   | false | DEVICE_DATA | 190 | 1 | 1 |
-| hpin2opt | input 2 options | string |   | true | DEVICE_DATA | 191 | 8 | 1 |
-| hpin3 | input 3 state | boolean |   | false | DEVICE_DATA | 199 | 1 | 1 |
-| hpin3opt | input 3 options | string |   | true | DEVICE_DATA | 200 | 8 | 1 |
-| hpin4 | input 4 state | boolean |   | false | DEVICE_DATA | 208 | 1 | 1 |
-| hpin4opt | input 4 options | string |   | true | DEVICE_DATA | 209 | 8 | 1 |
-| maxheatcomp | heat limit compressor | enum |   | true | DEVICE_DATA | 217 | 1 | 1 |
-| maxheatheat | heat limit heating | enum |   | true | DEVICE_DATA | 218 | 1 | 1 |
-| dhw.maxheat | heat limit | enum |   | true | DHW | 14 | 1 | 1 |
-| auxheatersource | aux heater source | enum |   | true | DEVICE_DATA | 219 | 1 | 1 |
-| pvcooling | cooling only with PV | boolean |   | true | DEVICE_DATA | 220 | 1 | 1 |
-| auxheateronly | aux heater only | boolean |   | true | DEVICE_DATA | 221 | 1 | 1 |
-| auxheateroff | disable aux heater | boolean |   | true | DEVICE_DATA | 222 | 1 | 1 |
-| auxheaterstatus | aux heater status | enum |   | false | DEVICE_DATA | 223 | 1 | 1 |
-| auxheaterlevel | aux heater level | uint8 | % | false | DEVICE_DATA | 224 | 1 | 1 |
-uint16
-| auxheaterdelay | aux heater on delay | uint16 (>=10<=1000) | K*min | true | DEVICE_DATA | 225 | 1 | 10 |
-uint8
-| auxmaxlimit | aux heater max limit | uint8 (>=0<=10) | K | true | DEVICE_DATA | 226 | 1 | 1/10 |
-uint8
-| auxlimitstart | aux heater limit start | uint8 (>=0<=10) | K | true | DEVICE_DATA | 227 | 1 | 1/10 |
-| auxheatrmode | aux heater mode | enum |   | true | DEVICE_DATA | 228 | 1 | 1 |
-uint16
-| hphystheat | on/off hyst heat | uint16 (>=50<=1500) | K*min | true | DEVICE_DATA | 229 | 1 | 5 |
-uint16
-| hphystcool | on/off hyst cool | uint16 (>=50<=1500) | K*min | true | DEVICE_DATA | 230 | 1 | 5 |
-uint16
-| hphystpool | on/off hyst pool | uint16 (>=50<=1500) | K*min | true | DEVICE_DATA | 231 | 1 | 5 |
-| silentmode | silent mode | enum |   | true | DEVICE_DATA | 232 | 1 | 1 |
-uint8
-| silentfrom | silent mode from | uint8 (>=0<=0) | minutes | true | DEVICE_DATA | 233 | 1 | 15 |
-uint8
-| silentto | silent mode to | uint8 (>=0<=0) | minutes | true | DEVICE_DATA | 234 | 1 | 15 |
-int8
-| mintempsilent | min outside temp for silent mode | int8 (>=0<=0) | C | true | DEVICE_DATA | 235 | 1 | 1 |
-int8
-| tempparmode | outside temp parallel mode | int8 (>=0<=0) | C | true | DEVICE_DATA | 236 | 1 | 1 |
-| auxheatmix | aux heater mixing valve | int8 | % | false | DEVICE_DATA | 237 | 1 | 1 |
-uint8
-| tempdiffheat | temp diff TC3/TC0 heat | uint8 (>=2<=10) | K | true | DEVICE_DATA | 238 | 1 | 1/10 |
-uint8
-| tempdiffcool | temp diff TC3/TC0 cool | uint8 (>=2<=10) | K | true | DEVICE_DATA | 239 | 1 | 1/10 |
-| vpcooling | valve/pump cooling | boolean |   | true | DEVICE_DATA | 240 | 1 | 1 |
-| heatcable | heating cable | boolean |   | true | DEVICE_DATA | 241 | 1 | 1 |
-| vc0valve | VC0 valve | boolean |   | true | DEVICE_DATA | 242 | 1 | 1 |
-| primepump | primary heatpump | boolean |   | true | DEVICE_DATA | 243 | 1 | 1 |
-uint8
-| primepumpmod | primary heatpump modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 244 | 1 | 1 |
-| hp3way | 3-way valve | boolean |   | true | DEVICE_DATA | 245 | 1 | 1 |
-| elheatstep1 | el. heater step 1 | boolean |   | true | DEVICE_DATA | 246 | 1 | 1 |
-| elheatstep2 | el. heater step 2 | boolean |   | true | DEVICE_DATA | 247 | 1 | 1 |
-| elheatstep3 | el. heater step 3 | boolean |   | true | DEVICE_DATA | 248 | 1 | 1 |
-| hpea0 | condensate reservoir heating (EA0) | boolean |   | false | DEVICE_DATA | 249 | 1 | 1 |
-| hppumpmode | primary heatpump mode | enum |   | true | DEVICE_DATA | 250 | 1 | 1 |
-uint8
-| fan | fan | uint8 (>=20<=100) | % | true | DEVICE_DATA | 251 | 1 | 1 |
-| fanspd | fan speed | uint8 | % | false | DEVICE_DATA | 252 | 1 | 1 |
-| shutdown | shutdown | cmd |   | true | DEVICE_DATA | 253 | 1 | 1 |
-| hpcurrpower | compressor current power | uint16 | W | false | DEVICE_DATA | 254 | 1 | 1 |
-uint16
-| hppowerlimit | power limit | uint16 (>=0<=0) | W | true | DEVICE_DATA | 255 | 1 | 1 |
-| dhw.alternatingop | alternating operation | boolean |   | true | DHW | 15 | 1 | 1 |
-uint8
-| dhw.altopprioheat | prioritise heating during dhw | uint8 (>=20<=120) | minutes | true | DHW | 16 | 1 | 1 |
-uint8
-| dhw.altopprio | prioritise dhw during heating | uint8 (>=30<=120) | minutes | true | DHW | 17 | 1 | 1 |
-uint8
-| dhw.comfoff | comfort switch off | uint8 (>=15<=65) | C | true | DHW | 18 | 1 | 1 |
-uint8
-| dhw.ecooff | eco switch off | uint8 (>=15<=65) | C | true | DHW | 19 | 1 | 1 |
-uint8
-| dhw.ecoplusoff | eco+ switch off | uint8 (>=48<=63) | C | true | DHW | 20 | 1 | 1 |
-uint8
-| dhw.comfdiff | comfort diff | uint8 (>=4<=18) | K | true | DHW | 21 | 1 | 1 |
-uint8
-| dhw.ecodiff | eco diff | uint8 (>=4<=18) | K | true | DHW | 22 | 1 | 1 |
-uint8
-| dhw.ecoplusdiff | eco+ diff | uint8 (>=4<=15) | K | true | DHW | 23 | 1 | 1 |
-uint8
-| dhw.comfstop | comfort stop temp | uint8 (>=0<=0) | C | true | DHW | 24 | 1 | 1 |
-uint8
-| dhw.ecostop | eco stop temp | uint8 (>=0<=0) | C | true | DHW | 25 | 1 | 1 |
-uint8
-| dhw.ecoplusstop | eco+ stop temp | uint8 (>=0<=0) | C | true | DHW | 26 | 1 | 1 |
-| dhw.hpcircpump | circulation pump available during dhw | boolean |   | true | DHW | 27 | 1 | 1 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-uint8
-| dhw.disinfectduration | disinfection duration | uint8 (>=120<=240) | minutes | true | DHW | 48 | 1 | 10 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-
-### Geo 5xx
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| mandefrost | manual defrost | cmd |   | true | DEVICE_DATA | 88 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-| dhw.nrg | energy | uint24 | kWh | false | DHW | 0 | 2 | 1/100 |
-| nrgheat | energy heating | uint24 | kWh | false | DEVICE_DATA | 91 | 2 | 1/100 |
-| nrgcool | energy cooling | uint24 | kWh | false | DEVICE_DATA | 93 | 2 | 1/100 |
-| metertotal | meter total | uint24 | kWh | false | DEVICE_DATA | 95 | 2 | 1/100 |
-| metercomp | meter compressor | uint24 | kWh | false | DEVICE_DATA | 97 | 2 | 1/100 |
-| metereheat | meter e-heater | uint24 | kWh | false | DEVICE_DATA | 99 | 2 | 1/100 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/100 |
-| metercool | meter cooling | uint24 | kWh | false | DEVICE_DATA | 103 | 2 | 1/100 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/100 |
-| uptimetotal | heatpump total uptime | time | minutes | false | DEVICE_DATA | 105 | 2 | 1/60 |
-| uptimecontrol | total operating time heat | time | minutes | false | DEVICE_DATA | 107 | 2 | 1/60 |
-| uptimecompheating | operating time compressor heating | time | minutes | false | DEVICE_DATA | 109 | 2 | 1/60 |
-| uptimecompcooling | operating time compressor cooling | time | minutes | false | DEVICE_DATA | 111 | 2 | 1/60 |
-| dhw.uptimecomp | operating time compressor | time | minutes | false | DHW | 4 | 2 | 1/60 |
-| uptimecomppool | operating time compressor pool | time | minutes | false | DEVICE_DATA | 113 | 2 | 1/60 |
-| totalcompstarts | total compressor control starts | uint24 |   | false | DEVICE_DATA | 115 | 2 | 1 |
-| heatingstarts | heating control starts | uint24 |   | false | DEVICE_DATA | 117 | 2 | 1 |
-| coolingstarts | cooling control starts | uint24 |   | false | DEVICE_DATA | 119 | 2 | 1 |
-| dhw.startshp | starts hp | uint24 |   | false | DHW | 6 | 2 | 1 |
-| poolstarts | pool control starts | uint24 |   | false | DEVICE_DATA | 121 | 2 | 1 |
-| nrgconstotal | total energy consumption | uint24 | kWh | false | DEVICE_DATA | 123 | 2 | 1 |
-| nrgconscomptotal | total energy consumption compressor | uint24 | kWh | false | DEVICE_DATA | 125 | 2 | 1 |
-| nrgconscompheating | energy consumption compressor heating | uint24 | kWh | false | DEVICE_DATA | 127 | 2 | 1 |
-| dhw.nrgconscomp | energy consumption compressor | uint24 | kWh | false | DHW | 8 | 2 | 1 |
-| nrgconscompcooling | energy consumption compressor cooling | uint24 | kWh | false | DEVICE_DATA | 129 | 2 | 1 |
-| nrgconscomppool | energy consumption compressor pool | uint24 | kWh | false | DEVICE_DATA | 131 | 2 | 1 |
-| auxelecheatnrgconstotal | total aux elec. heater energy consumption | uint24 | kWh | false | DEVICE_DATA | 133 | 2 | 1 |
-| auxelecheatnrgconsheating | aux elec. heater energy consumption heating | uint24 | kWh | false | DEVICE_DATA | 135 | 2 | 1 |
-| dhw.auxelecheatnrgcons | aux elec. heater energy consumption | uint24 | kWh | false | DHW | 10 | 2 | 1 |
-| auxelecheatnrgconspool | aux elec. heater energy consumption pool | uint24 | kWh | false | DEVICE_DATA | 137 | 2 | 1 |
-| nrgsupptotal | total energy supplied | uint24 | kWh | false | DEVICE_DATA | 139 | 2 | 1 |
-| nrgsuppheating | total energy supplied heating | uint24 | kWh | false | DEVICE_DATA | 141 | 2 | 1 |
-| dhw.nrgsupp | total energy warm supplied | uint24 | kWh | false | DHW | 12 | 2 | 1 |
-| nrgsuppcooling | total energy supplied cooling | uint24 | kWh | false | DEVICE_DATA | 143 | 2 | 1 |
-| nrgsupppool | total energy supplied pool | uint24 | kWh | false | DEVICE_DATA | 145 | 2 | 1 |
-| hppower | compressor power output | uint16 | kW | false | DEVICE_DATA | 147 | 1 | 1/10 |
-uint8
-| hpmaxpower | compressor max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 148 | 1 | 1 |
-uint8
-| pvmaxcomp | pv compressor max power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 149 | 1 | 1/10 |
-uint8
-| powerreduction | power reduction | uint8 (>=30<=60) | % | true | DEVICE_DATA | 150 | 1 | 10 |
-uint8
-| hpsetdiffpress | set differential pressure | uint8 (>=150<=750) | mbar | true | DEVICE_DATA | 151 | 1 | 50 |
-| hpcompon | hp compressor | boolean |   | false | DEVICE_DATA | 152 | 1 | 1 |
-| hpactivity | compressor activity | enum |   | false | DEVICE_DATA | 153 | 1 | 1 |
-| hppoolon | hp pool | boolean |   | false | DEVICE_DATA | 154 | 1 | 1 |
-| hpbrinepumpspd | brine pump speed | uint8 | % | false | DEVICE_DATA | 155 | 1 | 1 |
-| hpswitchvalve | switch valve | boolean |   | false | DEVICE_DATA | 156 | 1 | 1 |
-| hpcompspd | compressor speed | uint8 | % | false | DEVICE_DATA | 157 | 1 | 1 |
-| hptargetspd | compressor target speed | uint8 | % | false | DEVICE_DATA | 158 | 1 | 1 |
-| hpcircspd | circulation pump speed | uint8 | % | false | DEVICE_DATA | 159 | 1 | 1 |
-| recvalve | receiver valve VR0 | uint8 | % | false | DEVICE_DATA | 160 | 1 | 1 |
-| expvalve | expansion valve VR1 | uint8 | % | false | DEVICE_DATA | 161 | 1 | 1 |
-| hpbrinein | brine in/evaporator | int16 | C | false | DEVICE_DATA | 162 | 1 | 1/10 |
-| hpbrineout | brine out/condenser | int16 | C | false | DEVICE_DATA | 163 | 1 | 1/10 |
-| hptc0 | heat carrier return (TC0) | int16 | C | false | DEVICE_DATA | 164 | 1 | 1/10 |
-| hptc1 | heat carrier forward (TC1) | int16 | C | false | DEVICE_DATA | 165 | 1 | 1/10 |
-| hptc3 | condenser temperature (TC3) | int16 | C | false | DEVICE_DATA | 166 | 1 | 1/10 |
-| hptr1 | compressor temperature (TR1) | int16 | C | false | DEVICE_DATA | 167 | 1 | 1/10 |
-| hptr3 | refrigerant temperature liquid side (condenser output) (TR3) | int16 | C | false | DEVICE_DATA | 168 | 1 | 1/10 |
-| hptr4 | evaporator inlet temperature (TR4) | int16 | C | false | DEVICE_DATA | 169 | 1 | 1/10 |
-| hptr5 | compressor inlet temperature (TR5) | int16 | C | false | DEVICE_DATA | 170 | 1 | 1/10 |
-| hptr6 | compressor outlet temperature (TR6) | int16 | C | false | DEVICE_DATA | 171 | 1 | 1/10 |
-| hptr7 | refrigerant temperature gas side (condenser input) (TR7) | int16 | C | false | DEVICE_DATA | 172 | 1 | 1/10 |
-| hptl2 | air inlet temperature (TL2) | int16 | C | false | DEVICE_DATA | 173 | 1 | 1/10 |
-| hppl1 | low pressure side temperature (PL1) | int16 | C | false | DEVICE_DATA | 174 | 1 | 1/10 |
-| hpph1 | high pressure side temperature (PH1) | int16 | C | false | DEVICE_DATA | 175 | 1 | 1/10 |
-| hpta4 | drain pan temp (TA4) | int16 | C | false | DEVICE_DATA | 176 | 1 | 1/10 |
-| hptw1 | reservoir temp (TW1) | int16 | C | false | DEVICE_DATA | 177 | 1 | 1/10 |
-| poolon | pool on | boolean |   | true | DEVICE_DATA | 178 | 1 | 1 |
-uint8
-| poolsettemp | pool setpoint | uint8 (>=0<=0) | C | true | DEVICE_DATA | 179 | 1 | 1/2 |
-| hp4way | 4-way valve (VR4) | boolean |   | false | DEVICE_DATA | 180 | 1 | 1 |
-| hpin1 | input 1 state | boolean |   | false | DEVICE_DATA | 181 | 1 | 1 |
-| hpin1opt | input 1 options | string |   | true | DEVICE_DATA | 182 | 8 | 1 |
-| hpin2 | input 2 state | boolean |   | false | DEVICE_DATA | 190 | 1 | 1 |
-| hpin2opt | input 2 options | string |   | true | DEVICE_DATA | 191 | 8 | 1 |
-| hpin3 | input 3 state | boolean |   | false | DEVICE_DATA | 199 | 1 | 1 |
-| hpin3opt | input 3 options | string |   | true | DEVICE_DATA | 200 | 8 | 1 |
-| hpin4 | input 4 state | boolean |   | false | DEVICE_DATA | 208 | 1 | 1 |
-| hpin4opt | input 4 options | string |   | true | DEVICE_DATA | 209 | 8 | 1 |
-| maxheatcomp | heat limit compressor | enum |   | true | DEVICE_DATA | 217 | 1 | 1 |
-| maxheatheat | heat limit heating | enum |   | true | DEVICE_DATA | 218 | 1 | 1 |
-| dhw.maxheat | heat limit | enum |   | true | DHW | 14 | 1 | 1 |
-| auxheatersource | aux heater source | enum |   | true | DEVICE_DATA | 219 | 1 | 1 |
-| pvcooling | cooling only with PV | boolean |   | true | DEVICE_DATA | 220 | 1 | 1 |
-| auxheateronly | aux heater only | boolean |   | true | DEVICE_DATA | 221 | 1 | 1 |
-| auxheateroff | disable aux heater | boolean |   | true | DEVICE_DATA | 222 | 1 | 1 |
-| auxheaterstatus | aux heater status | enum |   | false | DEVICE_DATA | 223 | 1 | 1 |
-| auxheaterlevel | aux heater level | uint8 | % | false | DEVICE_DATA | 224 | 1 | 1 |
-uint16
-| auxheaterdelay | aux heater on delay | uint16 (>=10<=1000) | K*min | true | DEVICE_DATA | 225 | 1 | 10 |
-uint8
-| auxmaxlimit | aux heater max limit | uint8 (>=0<=10) | K | true | DEVICE_DATA | 226 | 1 | 1/10 |
-uint8
-| auxlimitstart | aux heater limit start | uint8 (>=0<=10) | K | true | DEVICE_DATA | 227 | 1 | 1/10 |
-| auxheatrmode | aux heater mode | enum |   | true | DEVICE_DATA | 228 | 1 | 1 |
-uint16
-| hphystheat | on/off hyst heat | uint16 (>=50<=1500) | K*min | true | DEVICE_DATA | 229 | 1 | 5 |
-uint16
-| hphystcool | on/off hyst cool | uint16 (>=50<=1500) | K*min | true | DEVICE_DATA | 230 | 1 | 5 |
-uint16
-| hphystpool | on/off hyst pool | uint16 (>=50<=1500) | K*min | true | DEVICE_DATA | 231 | 1 | 5 |
-| silentmode | silent mode | enum |   | true | DEVICE_DATA | 232 | 1 | 1 |
-uint8
-| silentfrom | silent mode from | uint8 (>=0<=0) | minutes | true | DEVICE_DATA | 233 | 1 | 15 |
-uint8
-| silentto | silent mode to | uint8 (>=0<=0) | minutes | true | DEVICE_DATA | 234 | 1 | 15 |
-int8
-| mintempsilent | min outside temp for silent mode | int8 (>=0<=0) | C | true | DEVICE_DATA | 235 | 1 | 1 |
-int8
-| tempparmode | outside temp parallel mode | int8 (>=0<=0) | C | true | DEVICE_DATA | 236 | 1 | 1 |
-| auxheatmix | aux heater mixing valve | int8 | % | false | DEVICE_DATA | 237 | 1 | 1 |
-uint8
-| tempdiffheat | temp diff TC3/TC0 heat | uint8 (>=2<=10) | K | true | DEVICE_DATA | 238 | 1 | 1/10 |
-uint8
-| tempdiffcool | temp diff TC3/TC0 cool | uint8 (>=2<=10) | K | true | DEVICE_DATA | 239 | 1 | 1/10 |
-| vpcooling | valve/pump cooling | boolean |   | true | DEVICE_DATA | 240 | 1 | 1 |
-| heatcable | heating cable | boolean |   | true | DEVICE_DATA | 241 | 1 | 1 |
-| vc0valve | VC0 valve | boolean |   | true | DEVICE_DATA | 242 | 1 | 1 |
-| primepump | primary heatpump | boolean |   | true | DEVICE_DATA | 243 | 1 | 1 |
-uint8
-| primepumpmod | primary heatpump modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 244 | 1 | 1 |
-| hp3way | 3-way valve | boolean |   | true | DEVICE_DATA | 245 | 1 | 1 |
-| elheatstep1 | el. heater step 1 | boolean |   | true | DEVICE_DATA | 246 | 1 | 1 |
-| elheatstep2 | el. heater step 2 | boolean |   | true | DEVICE_DATA | 247 | 1 | 1 |
-| elheatstep3 | el. heater step 3 | boolean |   | true | DEVICE_DATA | 248 | 1 | 1 |
-| hpea0 | condensate reservoir heating (EA0) | boolean |   | false | DEVICE_DATA | 249 | 1 | 1 |
-| hppumpmode | primary heatpump mode | enum |   | true | DEVICE_DATA | 250 | 1 | 1 |
-uint8
-| fan | fan | uint8 (>=20<=100) | % | true | DEVICE_DATA | 251 | 1 | 1 |
-| fanspd | fan speed | uint8 | % | false | DEVICE_DATA | 252 | 1 | 1 |
-| shutdown | shutdown | cmd |   | true | DEVICE_DATA | 253 | 1 | 1 |
-| hpcurrpower | compressor current power | uint16 | W | false | DEVICE_DATA | 254 | 1 | 1 |
-uint16
-| hppowerlimit | power limit | uint16 (>=0<=0) | W | true | DEVICE_DATA | 255 | 1 | 1 |
-| dhw.alternatingop | alternating operation | boolean |   | true | DHW | 15 | 1 | 1 |
-uint8
-| dhw.altopprioheat | prioritise heating during dhw | uint8 (>=20<=120) | minutes | true | DHW | 16 | 1 | 1 |
-uint8
-| dhw.altopprio | prioritise dhw during heating | uint8 (>=30<=120) | minutes | true | DHW | 17 | 1 | 1 |
-uint8
-| dhw.comfoff | comfort switch off | uint8 (>=15<=65) | C | true | DHW | 18 | 1 | 1 |
-uint8
-| dhw.ecooff | eco switch off | uint8 (>=15<=65) | C | true | DHW | 19 | 1 | 1 |
-uint8
-| dhw.ecoplusoff | eco+ switch off | uint8 (>=48<=63) | C | true | DHW | 20 | 1 | 1 |
-uint8
-| dhw.comfdiff | comfort diff | uint8 (>=4<=18) | K | true | DHW | 21 | 1 | 1 |
-uint8
-| dhw.ecodiff | eco diff | uint8 (>=4<=18) | K | true | DHW | 22 | 1 | 1 |
-uint8
-| dhw.ecoplusdiff | eco+ diff | uint8 (>=4<=15) | K | true | DHW | 23 | 1 | 1 |
-uint8
-| dhw.comfstop | comfort stop temp | uint8 (>=0<=0) | C | true | DHW | 24 | 1 | 1 |
-uint8
-| dhw.ecostop | eco stop temp | uint8 (>=0<=0) | C | true | DHW | 25 | 1 | 1 |
-uint8
-| dhw.ecoplusstop | eco+ stop temp | uint8 (>=0<=0) | C | true | DHW | 26 | 1 | 1 |
-| dhw.hpcircpump | circulation pump available during dhw | boolean |   | true | DHW | 27 | 1 | 1 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-uint8
-| dhw.disinfectduration | disinfection duration | uint8 (>=120<=240) | minutes | true | DHW | 48 | 1 | 10 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-
-### Condens 5000i, Greenstar 8000/GC9800IW, GB192i*2
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Logamax U122, Cerapur
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Ecomline Excellent
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Logamax Plus, GB192, Condens GC9000, Greenstar ErP
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Cascade MC400
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### EasyControl Adapter
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-### Greenstar HIU, Logamax kompakt WS170
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| netflowtemp | heat network flow temp | uint16 | C | false | DEVICE_DATA | 283 | 1 | 1/10 |
-| heatvalve | heating valve | uint8 | % | false | DEVICE_DATA | 284 | 1 | 1 |
-| dhw.dhwvalve | valve | uint8 | % | false | DHW | 76 | 1 | 1 |
-uint8
-| keepwarmtemp | keep warm temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 285 | 1 | 1 |
-uint8
-| setreturntemp | set temp return | uint8 (>=0<=0) | C | true | DEVICE_DATA | 286 | 1 | 1 |
-| heating | heating | boolean |   | false | DEVICE_DATA | 287 | 1 | 1 |
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-
-### Logamax Plus GB122, Condense 2300, Junkers Cerapur GC2200W
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| reset | reset | cmd |   | true | DEVICE_DATA | 0 | 1 | 1 |
-| chimneysweeper | chimney sweeper | cmd |   | true | DEVICE_DATA | 1 | 1 | 1 |
-| heatingoff | force heating off | boolean |   | true | DEVICE_DATA | 2 | 1 | 1 |
-| heatingactive | heating active | boolean |   | false | DEVICE_DATA | 3 | 1 | 1 |
-| tapwateractive | tapwater active | boolean |   | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| selflowtemp | selected flow temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 6 | 1 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| curflowtemp | current flow temperature | uint16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| rettemp | return temperature | uint16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| switchtemp | mixing switch temperature | uint16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| syspress | system pressure | uint8 | bar | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| boiltemp | actual boiler temperature | uint16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| headertemp | low loss header | uint16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| exhausttemp | exhaust temperature | uint16 | C | false | DEVICE_DATA | 256 | 1 | 1/10 |
-| burngas | gas | boolean |   | false | DEVICE_DATA | 257 | 1 | 1 |
-| burngas2 | gas stage 2 | boolean |   | false | DEVICE_DATA | 258 | 1 | 1 |
-| flamecurr | flame current | uint16 | µA | false | DEVICE_DATA | 259 | 1 | 1/10 |
-| fanwork | fan | boolean |   | false | DEVICE_DATA | 260 | 1 | 1 |
-| ignwork | ignition | boolean |   | false | DEVICE_DATA | 261 | 1 | 1 |
-| oilpreheat | oil preheating | boolean |   | false | DEVICE_DATA | 262 | 1 | 1 |
-uint8
-| burnminpower | burner min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 263 | 1 | 1 |
-uint8
-| burnmaxpower | burner max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 264 | 1 | 1 |
-uint8
-| burnminperiod | burner min period | uint8 (>=0<=120) | minutes | true | DEVICE_DATA | 265 | 1 | 1 |
-| absburnpow | burner current power (absolute) | uint8 | % | false | DEVICE_DATA | 266 | 1 | 1 |
-| heatblock | Heatblock temperature | uint16 | C | false | DEVICE_DATA | 267 | 1 | 1/10 |
-int8
-| boilhyston | hysteresis on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 268 | 1 | 1 |
-int8
-| boilhystoff | hysteresis off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 269 | 1 | 1 |
-int8
-| boil2hyston | hysteresis stage 2 on temperature | int8 (>=-20<=0) | C | true | DEVICE_DATA | 270 | 1 | 1 |
-int8
-| boil2hystoff | hysteresis stage 2 off temperature | int8 (>=0<=20) | C | true | DEVICE_DATA | 271 | 1 | 1 |
-| curveon | heatingcurve on | boolean |   | true | DEVICE_DATA | 272 | 1 | 1 |
-uint8
-| curvebase | heatingcurve base | uint8 (>=20<=90) | C | true | DEVICE_DATA | 273 | 1 | 1 |
-uint8
-| curveend | heatingcurve end | uint8 (>=20<=90) | C | true | DEVICE_DATA | 274 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=0<=45) | C | true | DEVICE_DATA | 275 | 1 | 1 |
-| nofrostmode | nofrost mode | boolean |   | true | DEVICE_DATA | 276 | 1 | 1 |
-uint8
-| nofrosttemp | nofrost temperature | uint8 (>=0<=10) | C | true | DEVICE_DATA | 277 | 1 | 1 |
-| heatingactivated | heating activated | boolean |   | true | DEVICE_DATA | 14 | 1 | 1 |
-uint8
-| heatingtemp | heating temperature | uint8 (>=0<=90) | C | true | DEVICE_DATA | 15 | 1 | 1 |
-| heatingpump | heating pump | boolean |   | false | DEVICE_DATA | 16 | 1 | 1 |
-uint8
-| pumpmodmax | boiler pump max power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 17 | 1 | 1 |
-uint8
-| pumpmodmin | boiler pump min power | uint8 (>=0<=0) | % | true | DEVICE_DATA | 18 | 1 | 1 |
-| pumpmode | boiler pump mode | enum |   | true | DEVICE_DATA | 19 | 1 | 1 |
-| pumpcharacter | boiler pump characteristic | enum |   | true | DEVICE_DATA | 20 | 1 | 1 |
-uint8
-| pumpdelay | pump delay | uint8 (>=0<=60) | minutes | true | DEVICE_DATA | 21 | 1 | 1 |
-uint8
-| pumpontemp | pump logic temperature | uint8 (>=0<=60) | C | true | DEVICE_DATA | 22 | 1 | 1 |
-uint8
-| selburnpow | burner selected max power | uint8 (>=0<=254) | % | true | DEVICE_DATA | 23 | 1 | 1 |
-| curburnpow | burner current power | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| burnstarts | burner starts | uint24 |   | false | DEVICE_DATA | 25 | 2 | 1 |
-| burnworkmin | total burner operating time | time | minutes | false | DEVICE_DATA | 27 | 2 | 1 |
-| burn2workmin | burner stage 2 operating time | time | minutes | false | DEVICE_DATA | 29 | 2 | 1 |
-| heatworkmin | total heat operating time | time | minutes | false | DEVICE_DATA | 31 | 2 | 1 |
-| heatstarts | burner starts heating | uint24 |   | false | DEVICE_DATA | 33 | 2 | 1 |
-| ubauptime | total UBA operating time | time | minutes | false | DEVICE_DATA | 35 | 2 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 37 | 28 | 1 |
-| servicecode | service code | string |   | false | DEVICE_DATA | 65 | 2 | 1 |
-| servicecodenumber | service code number | uint16 |   | false | DEVICE_DATA | 67 | 1 | 1 |
-| maintenancemessage | maintenance message | string |   | false | DEVICE_DATA | 68 | 2 | 1 |
-| maintenance | maintenance scheduled | enum |   | true | DEVICE_DATA | 70 | 1 | 1 |
-uint16
-| maintenancetime | time to next maintenance | uint16 (>=0<=0) | hours | true | DEVICE_DATA | 71 | 1 | 1 |
-| maintenancedate | next maintenance date | string |   | true | DEVICE_DATA | 72 | 6 | 1 |
-| emergencyops | emergency operation | boolean |   | true | DEVICE_DATA | 78 | 1 | 1 |
-uint8
-| emergencytemp | emergency temperature | uint8 (>=15<=70) | C | true | DEVICE_DATA | 79 | 1 | 1 |
-| pc0lpm | Flow PC0 | uint16 | l/min | false | DEVICE_DATA | 80 | 1 | 1/10 |
-| pc0flow | Flow PC0 | uint16 | l/h | false | DEVICE_DATA | 81 | 1 | 1 |
-| pc1flow | Flow PC1 | uint16 | l/h | false | DEVICE_DATA | 82 | 1 | 1 |
-| pc1on | PC1 | boolean |   | false | DEVICE_DATA | 83 | 1 | 1 |
-| pc1rate | PC1 rate | uint8 | % | false | DEVICE_DATA | 84 | 1 | 1 |
-uint8
-| pumpkickhour | pump kick hour | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 85 | 1 | 1 |
-| pumpkickday | pump kick day | enum |   | true | DEVICE_DATA | 86 | 1 | 1 |
-uint16
-| pumpkickdelay | pump kick delay | uint16 (>=0<=32767) | minutes | true | DEVICE_DATA | 87 | 1 | 1 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 101 | 2 | 1/10 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 2 | 2 | 1/10 |
-| gasmeterheat | gas meter heating | uint24 | kWh | false | DEVICE_DATA | 278 | 2 | 1/10 |
-| dhw.gasmeter | gas meter | uint24 | kWh | false | DHW | 72 | 2 | 1/10 |
-| nrgheat2 | energy heating 2 | uint24 | kWh | false | DEVICE_DATA | 280 | 2 | 1/10 |
-| dhw.nrg2 | energy 2 | uint24 | kWh | false | DHW | 74 | 2 | 1/10 |
-| dhw.tapactivated | turn on/off | boolean |   | true | DHW | 28 | 1 | 1 |
-| dhw.settemp | set temperature | uint8 | C | false | DHW | 29 | 1 | 1 |
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 30 | 1 | 1 |
-uint8
-| dhw.seltemplow | selected lower temperature | uint8 (>=0<=0) | C | true | DHW | 31 | 1 | 1 |
-uint8
-| dhw.tempecoplus | selected eco+ temperature | uint8 (>=0<=0) | C | true | DHW | 32 | 1 | 1 |
-| dhw.seltempoff | selected temperature for off | uint8 | C | false | DHW | 33 | 1 | 1 |
-uint8
-| dhw.seltempsingle | single charge temperature | uint8 (>=0<=0) | C | true | DHW | 34 | 1 | 1 |
-| dhw.solartemp | solar boiler temperature | uint16 | C | false | DHW | 35 | 1 | 1/10 |
-| dhw.type | type | enum |   | false | DHW | 36 | 1 | 1 |
-| dhw.comfort | comfort | enum |   | true | DHW | 37 | 1 | 1 |
-| dhw.comfort1 | comfort mode | enum |   | true | DHW | 38 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=100) | C | true | DHW | 39 | 1 | 1 |
-| dhw.chargeoptimization | charge optimization | boolean |   | true | DHW | 40 | 1 | 1 |
-uint8
-| dhw.maxpower | max power | uint8 (>=0<=254) | % | true | DHW | 41 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=80) | C | true | DHW | 42 | 1 | 1 |
-| dhw.circpump | circulation pump available | boolean |   | true | DHW | 43 | 1 | 1 |
-| dhw.chargetype | charging type | enum |   | false | DHW | 44 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 45 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 46 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=60<=80) | C | true | DHW | 47 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 49 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 50 | 1 | 1 |
-| dhw.curtemp | current intern temperature | uint16 | C | false | DHW | 51 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 52 | 1 | 1/10 |
-| dhw.curflow | current tap water flow | uint8 | l/min | false | DHW | 53 | 1 | 1/10 |
-| dhw.storagetemp1 | storage intern temperature | uint16 | C | false | DHW | 54 | 1 | 1/10 |
-| dhw.storagetemp2 | storage extern temperature | uint16 | C | false | DHW | 55 | 1 | 1/10 |
-| dhw.activated | activated | boolean |   | true | DHW | 56 | 1 | 1 |
-| dhw.onetime | one time charging | boolean |   | true | DHW | 57 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 58 | 1 | 1 |
-| dhw.charging | charging | boolean |   | false | DHW | 59 | 1 | 1 |
-| dhw.recharging | recharging | boolean |   | false | DHW | 60 | 1 | 1 |
-| dhw.tempok | temperature ok | boolean |   | false | DHW | 61 | 1 | 1 |
-| dhw.active | active | boolean |   | false | DHW | 62 | 1 | 1 |
-| dhw.3wayvalve | 3-way valve active | boolean |   | false | DHW | 63 | 1 | 1 |
-| dhw.chargepump | charge pump | boolean |   | false | DHW | 64 | 1 | 1 |
-| dhw.mixertemp | mixer temperature | uint16 | C | false | DHW | 65 | 1 | 1/10 |
-| dhw.cylmiddletemp | cylinder middle temperature (TS3) | uint16 | C | false | DHW | 66 | 1 | 1/10 |
-| dhw.dhwprio | dhw priority | boolean |   | true | DHW | 67 | 1 | 1 |
-| dhw.starts | starts | uint24 |   | false | DHW | 68 | 2 | 1 |
-| dhw.workm | active time | time | minutes | false | DHW | 70 | 2 | 1 |
-uint8
-| nompower | nominal Power | uint8 (>=0<=0) | kW | true | DEVICE_DATA | 282 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 89 | 2 | 1/100 |
-uint24
-| nrgheat | energy heating | uint24 (>=0<=10000000) | kWh | true | DEVICE_DATA | 91 | 2 | 1/100 |
-uint24
-| dhw.nrg | energy | uint24 (>=0<=10000000) | kWh | true | DHW | 0 | 2 | 1/100 |
-
-## Devices of type \_thermostat
-
-### Logamatic TC100, Moduline Easy
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-| hc1.seltemp | selected room temperature | int16 | C | false | HC | 0 | 1 | 1/100 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/100 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-
-### EasyControl, CT200
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-| hc1.seltemp | selected room temperature | int16 | C | false | HC | 0 | 1 | 1/100 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/100 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-
-### UI800, BC400
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=0<=0) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-| floordry | floor drying | enum |   | false | DEVICE_DATA | 47 | 1 | 1 |
-| dampedoutdoortemp | damped outdoor temperature | int16 | C | false | DEVICE_DATA | 48 | 1 | 1/10 |
-| floordrytemp | floor drying temperature | uint8 | C | false | DEVICE_DATA | 49 | 1 | 1 |
-| building | building type | enum |   | true | DEVICE_DATA | 50 | 1 | 1 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| damping | damping outdoor temperature | boolean |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| solar | solar | boolean |   | true | DEVICE_DATA | 53 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-| pvenabledhw | enable raise dhw | boolean |   | true | DEVICE_DATA | 61 | 1 | 1 |
-int8
-| pvraiseheat | raise heating with PV | int8 (>=0<=5) | K | true | DEVICE_DATA | 62 | 1 | 1 |
-int8
-| pvlowercool | lower cooling with PV | int8 (>=-5<=0) | K | true | DEVICE_DATA | 63 | 1 | 1 |
-| absent | absent | boolean |   | true | DEVICE_DATA | 64 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-uint8
-| hc1.manualtemp | manual temperature | uint8 (>=0<=0) | C | true | HC | 6 | 1 | 1/2 |
-uint8
-| hc1.comforttemp | comfort temperature | uint8 (>=0<=0) | C | true | HC | 7 | 1 | 1/2 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=10<=30) | C | true | HC | 8 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=0<=0) | C | true | HC | 9 | 1 | 1 |
-int8
-| hc1.offsettemp | offset temperature | int8 (>=0<=0) | C | true | HC | 10 | 1 | 1 |
-uint8
-| hc1.baseflowtemp | base flow temperature | uint8 (>=0<=0) | C | true | HC | 11 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=0<=0) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=0<=0) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.roominfluence | room influence | uint8 (>=0<=0) | C | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) |   | true | HC | 15 | 1 | 1/10 |
-| hc1.curroominfl | current room influence | int16 | C | false | HC | 16 | 1 | 1/10 |
-| hc1.nofrostmode | nofrost mode | enum |   | true | HC | 17 | 1 | 1 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.summersetmode | set summer mode | enum |   | true | HC | 21 | 1 | 1 |
-| hc1.hpoperatingmode | heatpump operating mode | enum |   | true | HC | 22 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-| hc1.hpoperatingstate | heatpump operating state | enum |   | false | HC | 24 | 1 | 1 |
-| hc1.vacationmode | vacation mode | boolean |   | false | HC | 25 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-int8
-| hc1.tempautotemp | temporary set temperature automode | int8 (>=-1<=30) | C | true | HC | 28 | 1 | 1/2 |
-int8
-| hc1.cooltemp | cooling temperature | int8 (>=-1<=30) | C | true | HC | 29 | 1 | 1/2 |
-uint8
-| hc1.fastheatup | fast heatup | uint8 (>=0<=0) | % | true | HC | 30 | 1 | 1 |
-uint8
-| hc1.comfoffset | comfort point offset | uint8 (>=0<=10) | C | true | HC | 31 | 1 | 1 |
-int8
-| hc1.comftemp | comfort point temperature | int8 (>=-5<=15) | C | true | HC | 32 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.reducemode | reduce mode | enum |   | true | HC | 34 | 1 | 1 |
-int8
-| hc1.noreducetemp | no reduce below temperature | int8 (>=0<=0) | C | true | HC | 35 | 1 | 1 |
-int8
-| hc1.reducetemp | off/reduce switch temperature | int8 (>=0<=0) | C | true | HC | 36 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 37 | 1 | 1 |
-| hc1.hpcooling | hp cooling | boolean |   | true | HC | 38 | 1 | 1 |
-| hc1.coolingon | cooling on | boolean |   | false | HC | 39 | 1 | 1 |
-| hc1.hpmode | HP Mode | enum |   | true | HC | 40 | 1 | 1 |
-uint8
-| hc1.dewoffset | dew point offset | uint8 (>=2<=10) | K | true | HC | 41 | 1 | 1 |
-uint8
-| hc1.roomtempdiff | room temp difference | uint8 (>=0<=0) | K | true | HC | 42 | 1 | 1 |
-uint8
-| hc1.hpminflowtemp | HP min. flow temp. | uint8 (>=0<=0) | C | true | HC | 43 | 1 | 1 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.remotehum | room humidity from remote | cmd | % | true | HC | 46 | 1 | 1 |
-uint8
-| hc1.heatondelay | heat-on delay | uint8 (>=1<=48) | hours | true | HC | 47 | 1 | 1 |
-uint8
-| hc1.heatoffdelay | heat-off delay | uint8 (>=1<=48) | hours | true | HC | 48 | 1 | 1 |
-uint8
-| hc1.coolondelay | cooling on delay | uint8 (>=1<=48) | hours | true | HC | 49 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (>=1<=48) | hours | true | HC | 50 | 1 | 1 |
-uint8
-| hc1.instantstart | instant start | uint8 (>=1<=10) | K | true | HC | 51 | 1 | 1 |
-uint8
-| hc1.coolstart | cooling starttemp | uint8 (>=20<=35) | C | true | HC | 52 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.boosttime | boost time | uint8 (>=0<=0) | hours | true | HC | 54 | 1 | 1 |
-| hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
-int8
-| hc1.redthreshold | reduction threshold | int8 (>=12<=22) | C | true | HC | 56 | 1 | 1/2 |
-int8
-| hc1.solarinfl | solar influence | int8 (>=-5<=0) | C | true | HC | 57 | 1 | 1 |
-| hc1.currsolarinfl | current solar influence | int8 | C | false | HC | 58 | 1 | 1/10 |
-| hc1.heatingpid | heating PID | enum |   | true | HC | 59 | 1 | 1 |
-| hc1.pumpopt | pump optimization | boolean |   | true | HC | 60 | 1 | 1 |
-uint8
-| hc1.inttimefloor | integral time floor | uint8 (>=160<=320) | minutes | true | HC | 61 | 1 | 10 |
-uint8
-| hc1.inttime | integral time | uint8 (>=3<=80) | minutes | true | HC | 62 | 1 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| dhw.modetype | mode type | enum |   | false | DHW | 1 | 1 | 1 |
-uint8
-| dhw.settemp | set temperature | uint8 (>=0<=0) | C | true | DHW | 2 | 1 | 1 |
-uint8
-| dhw.settemplow | set low temperature | uint8 (>=0<=0) | C | true | DHW | 3 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 4 | 1 | 1 |
-uint8
-| dhw.chargeduration | charge duration | uint8 (>=0<=0) | minutes | true | DHW | 5 | 1 | 15 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-| dhw.extra | extra | boolean |   | false | DHW | 7 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 8 | 1 | 1 |
-| dhw.disinfectday | disinfection day | enum |   | true | DHW | 9 | 1 | 1 |
-uint8
-| dhw.disinfecttime | disinfection time | uint8 (>=0<=1431) | minutes | true | DHW | 10 | 1 | 15 |
-| dhw.dailyheating | daily heating | boolean |   | true | DHW | 11 | 1 | 1 |
-uint8
-| dhw.dailyheattime | daily heating time | uint8 (>=0<=1431) | minutes | true | DHW | 12 | 1 | 15 |
-
-### CR11
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-
-### RC10
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=0<=0) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=0<=0) | C | true | HC | 64 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=0<=0) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=0<=0) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.tempautotemp | temporary set temperature automode | uint8 (>=0<=0) | C | true | HC | 28 | 1 | 1/2 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=10<=30) | C | true | HC | 8 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-
-### RC30
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-| display | display | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| language | language | enum |   | false | DEVICE_DATA | 66 | 1 | 1 |
-int8
-| clockoffset | clock offset | int8 (>=0<=0) | seconds | true | DEVICE_DATA | 67 | 1 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=0<=0) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| inttemp1 | temperature sensor 1 | int16 | C | false | DEVICE_DATA | 68 | 1 | 1/10 |
-| inttemp2 | temperature sensor 2 | int16 | C | false | DEVICE_DATA | 69 | 1 | 1/10 |
-| damping | damping outdoor temperature | boolean |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| dampedoutdoortemp | damped outdoor temperature | int8 | C | false | DEVICE_DATA | 48 | 1 | 1 |
-| building | building type | enum |   | true | DEVICE_DATA | 50 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=10<=30) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=10<=30) | C | true | HC | 64 | 1 | 1/2 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-int8
-| hc1.offsettemp | offset temperature | int8 (>=-5<=5) | C | true | HC | 10 | 1 | 1/2 |
-uint8
-| hc1.holidaytemp | holiday temperature | uint8 (>=5<=30) | C | true | HC | 65 | 1 | 1/2 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-| hc1.holidaymode | holiday mode | boolean |   | false | HC | 66 | 1 | 1 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=-20<=10) | C | true | HC | 18 | 1 | 1 |
-| hc1.nofrostmode | nofrost mode | enum |   | true | HC | 17 | 1 | 1 |
-uint8
-| hc1.roominfluence | room influence | uint8 (>=0<=10) | C | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.flowtempoffset | flow temperature offset for mixer | uint8 (>=0<=20) | C | true | HC | 67 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.reducemode | reduce mode | enum |   | true | HC | 34 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
-| hc1.holidays | holiday dates | string |   | true | HC | 68 | 13 | 1 |
-| hc1.vacations | vacation dates | string |   | true | HC | 81 | 13 | 1 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-uint8
-| hc1.pause | pause time | uint8 (>=0<=99) | hours | true | HC | 94 | 1 | 1 |
-uint8
-| hc1.party | party time | uint8 (>=0<=99) | hours | true | HC | 95 | 1 | 1 |
-uint8
-| hc1.tempautotemp | temporary set temperature automode | uint8 (>=0<=30) | C | true | HC | 28 | 1 | 1/2 |
-int8
-| hc1.noreducetemp | no reduce below temperature | int8 (>=-31<=10) | C | true | HC | 35 | 1 | 1 |
-int8
-| hc1.reducetemp | off/reduce switch temperature | int8 (>=-20<=10) | C | true | HC | 36 | 1 | 1 |
-int8
-| hc1.vacreducetemp | vacations off/reduce switch temperature | int8 (>=-20<=10) | C | true | HC | 96 | 1 | 1 |
-| hc1.vacreducemode | vacations reduce mode | enum |   | true | HC | 97 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 37 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.switchtime1 | own1 program switchtime | string |   | true | HC | 98 | 8 | 1 |
-| hc1.switchtime2 | own2 program switchtime | string |   | true | HC | 106 | 8 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 4 | 1 | 1 |
-| dhw.progmode | program | enum |   | true | DHW | 13 | 1 | 1 |
-| dhw.circprog | circulation program | enum |   | true | DHW | 14 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 8 | 1 | 1 |
-| dhw.disinfectday | disinfection day | enum |   | true | DHW | 9 | 1 | 1 |
-uint8
-| dhw.disinfecthour | disinfection hour | uint8 (>=0<=23) |   | true | DHW | 15 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=0) | C | true | DHW | 16 | 1 | 1 |
-| dhw.onetimekey | one time key function | boolean |   | true | DHW | 17 | 1 | 1 |
-| dhw.switchtime | program switchtime | string |   | true | DHW | 18 | 8 | 1 |
-| dhw.circswitchtime | circulation program switchtime | string |   | true | DHW | 26 | 8 | 1 |
-| dhw.holidays | holiday dates | string |   | true | DHW | 34 | 13 | 1 |
-| dhw.vacations | vacation dates | string |   | true | DHW | 47 | 13 | 1 |
-
-### RC20, Moduline 300
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-uint8
-| hc1.manualtemp | manual temperature | uint8 (>=0<=0) | C | true | HC | 6 | 1 | 1/2 |
-uint8
-| hc1.offtemp | temperature when mode is off | uint8 (>=0<=0) | C | true | HC | 114 | 1 | 1/2 |
-uint8
-| hc1.daytemp2 | day temperature T2 | uint8 (>=0<=0) | C | true | HC | 115 | 1 | 1/2 |
-uint8
-| hc1.daytemp3 | day temperature T3 | uint8 (>=0<=0) | C | true | HC | 116 | 1 | 1/2 |
-uint8
-| hc1.daytemp4 | day temperature T4 | uint8 (>=0<=0) | C | true | HC | 117 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature T1 | uint8 (>=0<=0) | C | true | HC | 64 | 1 | 1/2 |
-| hc1.switchtime | program switchtime | string |   | true | HC | 118 | 8 | 1 |
-
-### Moduline 400
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| clockoffset | clock offset | int8 (>=0<=0) | seconds | true | DEVICE_DATA | 67 | 1 | 1 |
-| autodst | automatic change daylight saving time | boolean |   | true | DEVICE_DATA | 70 | 1 | 1 |
-| language | language | enum |   | true | DEVICE_DATA | 66 | 1 | 1 |
-| backlight | key backlight | boolean |   | true | DEVICE_DATA | 71 | 1 | 1 |
-int8
-| brightness | screen brightness | int8 (>=-15<=15) |   | true | DEVICE_DATA | 72 | 1 | 1 |
-uint8
-| mixingvalves | mixing valves | uint8 (>=0<=2) |   | true | DEVICE_DATA | 73 | 1 | 1 |
-| building | building type | enum |   | true | DEVICE_DATA | 50 | 1 | 1 |
-| heatingpid | heating PID | enum |   | true | DEVICE_DATA | 74 | 1 | 1 |
-| preheating | preheating in the clock program | boolean |   | true | DEVICE_DATA | 75 | 1 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=0<=0) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-uint8
-| hc1.pause | pause time | uint8 (>=0<=0) | hours | true | HC | 94 | 1 | 1 |
-uint8
-| hc1.party | party time | uint8 (>=0<=0) | hours | true | HC | 95 | 1 | 1 |
-| hc1.vacations1 | vacation dates 1 | string |   | true | HC | 126 | 11 | 1 |
-| hc1.vacations2 | vacation dates 2 | string |   | true | HC | 137 | 11 | 1 |
-| hc1.vacations3 | vacation dates 3 | string |   | true | HC | 148 | 11 | 1 |
-| hc1.vacations4 | vacation dates 4 | string |   | true | HC | 159 | 11 | 1 |
-| hc1.vacations5 | vacation dates 5 | string |   | true | HC | 170 | 11 | 1 |
-| hc1.vacations6 | vacation dates 6 | string |   | true | HC | 181 | 11 | 1 |
-| hc1.vacations7 | vacation dates 7 | string |   | true | HC | 192 | 11 | 1 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.switchtime1 | own1 program switchtime | string |   | true | HC | 98 | 8 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-uint8
-| hc1.holidaytemp | holiday temperature | uint8 (>=0<=0) | C | true | HC | 65 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature T1 | uint8 (>=0<=0) | C | true | HC | 64 | 1 | 1/2 |
-uint8
-| hc1.daytemp2 | day temperature T2 | uint8 (>=0<=0) | C | true | HC | 115 | 1 | 1/2 |
-uint8
-| hc1.daytemp3 | day temperature T3 | uint8 (>=0<=0) | C | true | HC | 116 | 1 | 1/2 |
-uint8
-| hc1.daytemp4 | day temperature T4 | uint8 (>=0<=0) | C | true | HC | 117 | 1 | 1/2 |
-uint8
-| hc1.manualtemp | manual temperature | uint8 (>=0<=0) | C | true | HC | 6 | 1 | 1/2 |
-uint8
-| hc1.offtemp | temperature when mode is off | uint8 (>=0<=0) | C | true | HC | 114 | 1 | 1/2 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| dhw.whenmodeoff | when thermostat mode off | boolean |   | true | DHW | 60 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 8 | 1 | 1 |
-| dhw.disinfectday | disinfection day | enum |   | true | DHW | 9 | 1 | 1 |
-uint8
-| dhw.disinfecthour | disinfection hour | uint8 (>=0<=23) |   | true | DHW | 15 | 1 | 1 |
-
-### RC10, Moduline 100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=0<=0) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-| heatingpid | heating PID | enum |   | true | DEVICE_DATA | 74 | 1 | 1 |
-| backlight | key backlight | boolean |   | true | DEVICE_DATA | 71 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=0<=0) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=0<=0) | C | true | HC | 64 | 1 | 1/2 |
-uint8
-| hc1.reducehours | duration for nighttemp | uint8 (>=0<=0) | hours | true | HC | 203 | 1 | 1 |
-| hc1.reduceminutes | remaining time for nightmode | uint16 | minutes | false | HC | 204 | 1 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=0<=0) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=0<=0) | C | true | HC | 64 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=0<=0) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=0<=0) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.tempautotemp | temporary set temperature automode | uint8 (>=0<=0) | C | true | HC | 28 | 1 | 1/2 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=10<=30) | C | true | HC | 8 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-
-### Moduline 200
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=0<=0) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-| heatingpid | heating PID | enum |   | true | DEVICE_DATA | 74 | 1 | 1 |
-| backlight | key backlight | boolean |   | true | DEVICE_DATA | 71 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=0<=0) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=0<=0) | C | true | HC | 64 | 1 | 1/2 |
-uint8
-| hc1.reducehours | duration for nighttemp | uint8 (>=0<=0) | hours | true | HC | 203 | 1 | 1 |
-| hc1.reduceminutes | remaining time for nightmode | uint16 | minutes | false | HC | 204 | 1 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-
-### RC35
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=-5<=5) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=-30<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| inttemp1 | temperature sensor 1 | int16 | C | false | DEVICE_DATA | 68 | 1 | 1/10 |
-| inttemp2 | temperature sensor 2 | int16 | C | false | DEVICE_DATA | 69 | 1 | 1/10 |
-| damping | damping outdoor temperature | boolean |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| dampedoutdoortemp | damped outdoor temperature | int8 | C | false | DEVICE_DATA | 48 | 1 | 1 |
-| building | building type | enum |   | true | DEVICE_DATA | 50 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=10<=30) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=10<=30) | C | true | HC | 64 | 1 | 1/2 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-int8
-| hc1.offsettemp | offset temperature | int8 (>=-5<=5) | C | true | HC | 10 | 1 | 1/2 |
-uint8
-| hc1.holidaytemp | holiday temperature | uint8 (>=5<=30) | C | true | HC | 65 | 1 | 1/2 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-| hc1.holidaymode | holiday mode | boolean |   | false | HC | 66 | 1 | 1 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=-20<=10) | C | true | HC | 18 | 1 | 1 |
-| hc1.nofrostmode | nofrost mode | enum |   | true | HC | 17 | 1 | 1 |
-uint8
-| hc1.roominfluence | room influence | uint8 (>=0<=10) | C | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.flowtempoffset | flow temperature offset for mixer | uint8 (>=0<=20) | C | true | HC | 67 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.reducemode | reduce mode | enum |   | true | HC | 34 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
-| hc1.holidays | holiday dates | string |   | true | HC | 68 | 13 | 1 |
-| hc1.vacations | vacation dates | string |   | true | HC | 81 | 13 | 1 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-uint8
-| hc1.pause | pause time | uint8 (>=0<=99) | hours | true | HC | 94 | 1 | 1 |
-uint8
-| hc1.party | party time | uint8 (>=0<=99) | hours | true | HC | 95 | 1 | 1 |
-uint8
-| hc1.tempautotemp | temporary set temperature automode | uint8 (>=0<=30) | C | true | HC | 28 | 1 | 1/2 |
-int8
-| hc1.noreducetemp | no reduce below temperature | int8 (>=-31<=10) | C | true | HC | 35 | 1 | 1 |
-int8
-| hc1.reducetemp | off/reduce switch temperature | int8 (>=-20<=10) | C | true | HC | 36 | 1 | 1 |
-int8
-| hc1.vacreducetemp | vacations off/reduce switch temperature | int8 (>=-20<=10) | C | true | HC | 96 | 1 | 1 |
-| hc1.vacreducemode | vacations reduce mode | enum |   | true | HC | 97 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 37 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.switchtime1 | own1 program switchtime | string |   | true | HC | 98 | 8 | 1 |
-| hc1.switchtime2 | own2 program switchtime | string |   | true | HC | 106 | 8 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 4 | 1 | 1 |
-| dhw.progmode | program | enum |   | true | DHW | 13 | 1 | 1 |
-| dhw.circprog | circulation program | enum |   | true | DHW | 14 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 8 | 1 | 1 |
-| dhw.disinfectday | disinfection day | enum |   | true | DHW | 9 | 1 | 1 |
-uint8
-| dhw.disinfecthour | disinfection hour | uint8 (>=0<=23) |   | true | DHW | 15 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=60<=80) | C | true | DHW | 16 | 1 | 1 |
-| dhw.onetimekey | one time key function | boolean |   | true | DHW | 17 | 1 | 1 |
-| dhw.switchtime | program switchtime | string |   | true | DHW | 18 | 8 | 1 |
-| dhw.circswitchtime | circulation program switchtime | string |   | true | DHW | 26 | 8 | 1 |
-| dhw.holidays | holiday dates | string |   | true | DHW | 34 | 13 | 1 |
-| dhw.vacations | vacation dates | string |   | true | DHW | 47 | 13 | 1 |
-
-### RC20RF
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-uint8
-| hc1.manualtemp | manual temperature | uint8 (>=0<=0) | C | true | HC | 6 | 1 | 1/2 |
-uint8
-| hc1.offtemp | temperature when mode is off | uint8 (>=0<=0) | C | true | HC | 114 | 1 | 1/2 |
-uint8
-| hc1.daytemp2 | day temperature T2 | uint8 (>=0<=0) | C | true | HC | 115 | 1 | 1/2 |
-uint8
-| hc1.daytemp3 | day temperature T3 | uint8 (>=0<=0) | C | true | HC | 116 | 1 | 1/2 |
-uint8
-| hc1.daytemp4 | day temperature T4 | uint8 (>=0<=0) | C | true | HC | 117 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature T1 | uint8 (>=0<=0) | C | true | HC | 64 | 1 | 1/2 |
-| hc1.switchtime | program switchtime | string |   | true | HC | 118 | 8 | 1 |
-
-### RFM20 Remote
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-
-### RC25
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=0<=0) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=0<=0) | C | true | HC | 64 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=0<=0) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=0<=0) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.tempautotemp | temporary set temperature automode | uint8 (>=0<=0) | C | true | HC | 28 | 1 | 1/2 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-
-### RC200, CW100, CR120, CR50
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=0<=0) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-| floordry | floor drying | enum |   | false | DEVICE_DATA | 47 | 1 | 1 |
-| dampedoutdoortemp | damped outdoor temperature | int16 | C | false | DEVICE_DATA | 48 | 1 | 1/10 |
-| floordrytemp | floor drying temperature | uint8 | C | false | DEVICE_DATA | 49 | 1 | 1 |
-| building | building type | enum |   | true | DEVICE_DATA | 50 | 1 | 1 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| damping | damping outdoor temperature | boolean |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| solar | solar | boolean |   | true | DEVICE_DATA | 53 | 1 | 1 |
-| vacations | vacation dates | string |   | true | DEVICE_DATA | 76 | 13 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-| pvenabledhw | enable raise dhw | boolean |   | true | DEVICE_DATA | 61 | 1 | 1 |
-int8
-| pvraiseheat | raise heating with PV | int8 (>=0<=5) | K | true | DEVICE_DATA | 62 | 1 | 1 |
-int8
-| pvlowercool | lower cooling with PV | int8 (>=-5<=0) | K | true | DEVICE_DATA | 63 | 1 | 1 |
-| absent | absent | boolean |   | true | DEVICE_DATA | 64 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-uint8
-| hc1.manualtemp | manual temperature | uint8 (>=0<=0) | C | true | HC | 6 | 1 | 1/2 |
-uint8
-| hc1.comforttemp | comfort temperature | uint8 (>=0<=0) | C | true | HC | 7 | 1 | 1/2 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=10<=30) | C | true | HC | 8 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=0<=0) | C | true | HC | 9 | 1 | 1 |
-int8
-| hc1.offsettemp | offset temperature | int8 (>=0<=0) | C | true | HC | 10 | 1 | 1 |
-uint8
-| hc1.baseflowtemp | base flow temperature | uint8 (>=0<=0) | C | true | HC | 11 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=0<=0) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=0<=0) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.roominfluence | room influence | uint8 (>=0<=0) | C | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) |   | true | HC | 15 | 1 | 1/10 |
-| hc1.curroominfl | current room influence | int16 | C | false | HC | 16 | 1 | 1/10 |
-| hc1.nofrostmode | nofrost mode | enum |   | true | HC | 17 | 1 | 1 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.summersetmode | set summer mode | enum |   | true | HC | 21 | 1 | 1 |
-| hc1.hpoperatingmode | heatpump operating mode | enum |   | true | HC | 22 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-| hc1.hpoperatingstate | heatpump operating state | enum |   | false | HC | 24 | 1 | 1 |
-| hc1.vacationmode | vacation mode | boolean |   | false | HC | 25 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-int8
-| hc1.tempautotemp | temporary set temperature automode | int8 (>=-1<=30) | C | true | HC | 28 | 1 | 1/2 |
-int8
-| hc1.cooltemp | cooling temperature | int8 (>=-1<=30) | C | true | HC | 29 | 1 | 1/2 |
-uint8
-| hc1.fastheatup | fast heatup | uint8 (>=0<=0) | % | true | HC | 30 | 1 | 1 |
-uint8
-| hc1.comfoffset | comfort point offset | uint8 (>=0<=10) | C | true | HC | 31 | 1 | 1 |
-int8
-| hc1.comftemp | comfort point temperature | int8 (>=-5<=15) | C | true | HC | 32 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.reducemode | reduce mode | enum |   | true | HC | 34 | 1 | 1 |
-int8
-| hc1.noreducetemp | no reduce below temperature | int8 (>=0<=0) | C | true | HC | 35 | 1 | 1 |
-int8
-| hc1.reducetemp | off/reduce switch temperature | int8 (>=0<=0) | C | true | HC | 36 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 37 | 1 | 1 |
-| hc1.hpcooling | hp cooling | boolean |   | true | HC | 38 | 1 | 1 |
-| hc1.coolingon | cooling on | boolean |   | false | HC | 39 | 1 | 1 |
-| hc1.hpmode | HP Mode | enum |   | true | HC | 40 | 1 | 1 |
-uint8
-| hc1.dewoffset | dew point offset | uint8 (>=2<=10) | K | true | HC | 41 | 1 | 1 |
-uint8
-| hc1.roomtempdiff | room temp difference | uint8 (>=0<=0) | K | true | HC | 42 | 1 | 1 |
-uint8
-| hc1.hpminflowtemp | HP min. flow temp. | uint8 (>=0<=0) | C | true | HC | 43 | 1 | 1 |
-uint8
-| hc1.heatondelay | heat-on delay | uint8 (>=1<=48) | hours | true | HC | 47 | 1 | 1 |
-uint8
-| hc1.heatoffdelay | heat-off delay | uint8 (>=1<=48) | hours | true | HC | 48 | 1 | 1 |
-uint8
-| hc1.coolondelay | cooling on delay | uint8 (>=1<=48) | hours | true | HC | 49 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (>=1<=48) | hours | true | HC | 50 | 1 | 1 |
-uint8
-| hc1.instantstart | instant start | uint8 (>=1<=10) | K | true | HC | 51 | 1 | 1 |
-uint8
-| hc1.coolstart | cooling starttemp | uint8 (>=20<=35) | C | true | HC | 52 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.boosttime | boost time | uint8 (>=0<=0) | hours | true | HC | 54 | 1 | 1 |
-| hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
-int8
-| hc1.redthreshold | reduction threshold | int8 (>=12<=22) | C | true | HC | 56 | 1 | 1/2 |
-int8
-| hc1.solarinfl | solar influence | int8 (>=-5<=0) | C | true | HC | 57 | 1 | 1 |
-| hc1.currsolarinfl | current solar influence | int8 | C | false | HC | 58 | 1 | 1/10 |
-| hc1.heatingpid | heating PID | enum |   | true | HC | 59 | 1 | 1 |
-| hc1.pumpopt | pump optimization | boolean |   | true | HC | 60 | 1 | 1 |
-uint8
-| hc1.inttimefloor | integral time floor | uint8 (>=160<=320) | minutes | true | HC | 61 | 1 | 10 |
-uint8
-| hc1.inttime | integral time | uint8 (>=3<=80) | minutes | true | HC | 62 | 1 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| dhw.modetype | mode type | enum |   | false | DHW | 1 | 1 | 1 |
-uint8
-| dhw.settemp | set temperature | uint8 (>=0<=0) | C | true | DHW | 2 | 1 | 1 |
-uint8
-| dhw.settemplow | set low temperature | uint8 (>=0<=0) | C | true | DHW | 3 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 4 | 1 | 1 |
-uint8
-| dhw.chargeduration | charge duration | uint8 (>=0<=0) | minutes | true | DHW | 5 | 1 | 15 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-| dhw.extra | extra | boolean |   | false | DHW | 7 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 8 | 1 | 1 |
-| dhw.disinfectday | disinfection day | enum |   | true | DHW | 9 | 1 | 1 |
-uint8
-| dhw.disinfecttime | disinfection time | uint8 (>=0<=1431) | minutes | true | DHW | 10 | 1 | 15 |
-| dhw.dailyheating | daily heating | boolean |   | true | DHW | 11 | 1 | 1 |
-uint8
-| dhw.dailyheattime | daily heating time | uint8 (>=0<=1431) | minutes | true | DHW | 12 | 1 | 15 |
-
-### RC3*0, Moduline 3000/1010H, CW400, Sense II, HPC410
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=0<=0) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-| floordry | floor drying | enum |   | false | DEVICE_DATA | 47 | 1 | 1 |
-| dampedoutdoortemp | damped outdoor temperature | int16 | C | false | DEVICE_DATA | 48 | 1 | 1/10 |
-| floordrytemp | floor drying temperature | uint8 | C | false | DEVICE_DATA | 49 | 1 | 1 |
-| building | building type | enum |   | true | DEVICE_DATA | 50 | 1 | 1 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| damping | damping outdoor temperature | boolean |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| solar | solar | boolean |   | true | DEVICE_DATA | 53 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-| pvenabledhw | enable raise dhw | boolean |   | true | DEVICE_DATA | 61 | 1 | 1 |
-int8
-| pvraiseheat | raise heating with PV | int8 (>=0<=5) | K | true | DEVICE_DATA | 62 | 1 | 1 |
-int8
-| pvlowercool | lower cooling with PV | int8 (>=-5<=0) | K | true | DEVICE_DATA | 63 | 1 | 1 |
-| absent | absent | boolean |   | true | DEVICE_DATA | 64 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-uint8
-| hc1.manualtemp | manual temperature | uint8 (>=0<=0) | C | true | HC | 6 | 1 | 1/2 |
-uint8
-| hc1.comforttemp | comfort temperature | uint8 (>=0<=0) | C | true | HC | 7 | 1 | 1/2 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=10<=30) | C | true | HC | 8 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=0<=0) | C | true | HC | 9 | 1 | 1 |
-int8
-| hc1.offsettemp | offset temperature | int8 (>=0<=0) | C | true | HC | 10 | 1 | 1 |
-uint8
-| hc1.baseflowtemp | base flow temperature | uint8 (>=0<=0) | C | true | HC | 11 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=0<=0) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=0<=0) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.roominfluence | room influence | uint8 (>=0<=0) | C | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) |   | true | HC | 15 | 1 | 1/10 |
-| hc1.curroominfl | current room influence | int16 | C | false | HC | 16 | 1 | 1/10 |
-| hc1.nofrostmode | nofrost mode | enum |   | true | HC | 17 | 1 | 1 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.summersetmode | set summer mode | enum |   | true | HC | 21 | 1 | 1 |
-| hc1.hpoperatingmode | heatpump operating mode | enum |   | true | HC | 22 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-| hc1.hpoperatingstate | heatpump operating state | enum |   | false | HC | 24 | 1 | 1 |
-| hc1.vacationmode | vacation mode | boolean |   | false | HC | 25 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-int8
-| hc1.tempautotemp | temporary set temperature automode | int8 (>=-1<=30) | C | true | HC | 28 | 1 | 1/2 |
-int8
-| hc1.cooltemp | cooling temperature | int8 (>=-1<=30) | C | true | HC | 29 | 1 | 1/2 |
-uint8
-| hc1.fastheatup | fast heatup | uint8 (>=0<=0) | % | true | HC | 30 | 1 | 1 |
-uint8
-| hc1.comfoffset | comfort point offset | uint8 (>=0<=10) | C | true | HC | 31 | 1 | 1 |
-int8
-| hc1.comftemp | comfort point temperature | int8 (>=-5<=15) | C | true | HC | 32 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.reducemode | reduce mode | enum |   | true | HC | 34 | 1 | 1 |
-int8
-| hc1.noreducetemp | no reduce below temperature | int8 (>=0<=0) | C | true | HC | 35 | 1 | 1 |
-int8
-| hc1.reducetemp | off/reduce switch temperature | int8 (>=0<=0) | C | true | HC | 36 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 37 | 1 | 1 |
-| hc1.hpcooling | hp cooling | boolean |   | true | HC | 38 | 1 | 1 |
-| hc1.coolingon | cooling on | boolean |   | false | HC | 39 | 1 | 1 |
-| hc1.hpmode | HP Mode | enum |   | true | HC | 40 | 1 | 1 |
-uint8
-| hc1.dewoffset | dew point offset | uint8 (>=2<=10) | K | true | HC | 41 | 1 | 1 |
-uint8
-| hc1.roomtempdiff | room temp difference | uint8 (>=0<=0) | K | true | HC | 42 | 1 | 1 |
-uint8
-| hc1.hpminflowtemp | HP min. flow temp. | uint8 (>=0<=0) | C | true | HC | 43 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.remotehum | room humidity from remote | cmd | % | true | HC | 46 | 1 | 1 |
-uint8
-| hc1.heatondelay | heat-on delay | uint8 (>=1<=48) | hours | true | HC | 47 | 1 | 1 |
-uint8
-| hc1.heatoffdelay | heat-off delay | uint8 (>=1<=48) | hours | true | HC | 48 | 1 | 1 |
-uint8
-| hc1.coolondelay | cooling on delay | uint8 (>=1<=48) | hours | true | HC | 49 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (>=1<=48) | hours | true | HC | 50 | 1 | 1 |
-uint8
-| hc1.instantstart | instant start | uint8 (>=1<=10) | K | true | HC | 51 | 1 | 1 |
-uint8
-| hc1.coolstart | cooling starttemp | uint8 (>=20<=35) | C | true | HC | 52 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.boosttime | boost time | uint8 (>=0<=0) | hours | true | HC | 54 | 1 | 1 |
-| hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
-int8
-| hc1.redthreshold | reduction threshold | int8 (>=12<=22) | C | true | HC | 56 | 1 | 1/2 |
-int8
-| hc1.solarinfl | solar influence | int8 (>=-5<=0) | C | true | HC | 57 | 1 | 1 |
-| hc1.currsolarinfl | current solar influence | int8 | C | false | HC | 58 | 1 | 1/10 |
-| hc1.heatingpid | heating PID | enum |   | true | HC | 59 | 1 | 1 |
-| hc1.pumpopt | pump optimization | boolean |   | true | HC | 60 | 1 | 1 |
-uint8
-| hc1.inttimefloor | integral time floor | uint8 (>=160<=320) | minutes | true | HC | 61 | 1 | 10 |
-uint8
-| hc1.inttime | integral time | uint8 (>=3<=80) | minutes | true | HC | 62 | 1 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| dhw.modetype | mode type | enum |   | false | DHW | 1 | 1 | 1 |
-uint8
-| dhw.settemp | set temperature | uint8 (>=0<=0) | C | true | DHW | 2 | 1 | 1 |
-uint8
-| dhw.settemplow | set low temperature | uint8 (>=0<=0) | C | true | DHW | 3 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 4 | 1 | 1 |
-uint8
-| dhw.chargeduration | charge duration | uint8 (>=0<=0) | minutes | true | DHW | 5 | 1 | 15 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-| dhw.extra | extra | boolean |   | false | DHW | 7 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 8 | 1 | 1 |
-| dhw.disinfectday | disinfection day | enum |   | true | DHW | 9 | 1 | 1 |
-uint8
-| dhw.disinfecttime | disinfection time | uint8 (>=0<=1431) | minutes | true | DHW | 10 | 1 | 15 |
-| dhw.dailyheating | daily heating | boolean |   | true | DHW | 11 | 1 | 1 |
-uint8
-| dhw.dailyheattime | daily heating time | uint8 (>=0<=1431) | minutes | true | DHW | 12 | 1 | 15 |
-
-### RC100, CR10, Moduline 1000/1010
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-
-### Rego 2000/3000
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=0<=0) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-| floordry | floor drying | enum |   | false | DEVICE_DATA | 47 | 1 | 1 |
-| dampedoutdoortemp | damped outdoor temperature | int16 | C | false | DEVICE_DATA | 48 | 1 | 1/10 |
-| floordrytemp | floor drying temperature | uint8 | C | false | DEVICE_DATA | 49 | 1 | 1 |
-| building | building type | enum |   | true | DEVICE_DATA | 50 | 1 | 1 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| damping | damping outdoor temperature | boolean |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| solar | solar | boolean |   | true | DEVICE_DATA | 53 | 1 | 1 |
-| vacations | vacation dates | string |   | true | DEVICE_DATA | 76 | 13 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-| pvenabledhw | enable raise dhw | boolean |   | true | DEVICE_DATA | 61 | 1 | 1 |
-int8
-| pvraiseheat | raise heating with PV | int8 (>=0<=5) | K | true | DEVICE_DATA | 62 | 1 | 1 |
-int8
-| pvlowercool | lower cooling with PV | int8 (>=-5<=0) | K | true | DEVICE_DATA | 63 | 1 | 1 |
-| absent | absent | boolean |   | true | DEVICE_DATA | 64 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-uint8
-| hc1.manualtemp | manual temperature | uint8 (>=0<=0) | C | true | HC | 6 | 1 | 1/2 |
-uint8
-| hc1.comforttemp | comfort temperature | uint8 (>=0<=0) | C | true | HC | 7 | 1 | 1/2 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=10<=30) | C | true | HC | 8 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=0<=0) | C | true | HC | 9 | 1 | 1 |
-int8
-| hc1.offsettemp | offset temperature | int8 (>=0<=0) | C | true | HC | 10 | 1 | 1 |
-uint8
-| hc1.baseflowtemp | base flow temperature | uint8 (>=0<=0) | C | true | HC | 11 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=0<=0) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=0<=0) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.roominfluence | room influence | uint8 (>=0<=0) | C | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) |   | true | HC | 15 | 1 | 1/10 |
-| hc1.curroominfl | current room influence | int16 | C | false | HC | 16 | 1 | 1/10 |
-| hc1.nofrostmode | nofrost mode | enum |   | true | HC | 17 | 1 | 1 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.summersetmode | set summer mode | enum |   | true | HC | 21 | 1 | 1 |
-| hc1.hpoperatingmode | heatpump operating mode | enum |   | true | HC | 22 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-| hc1.hpoperatingstate | heatpump operating state | enum |   | false | HC | 24 | 1 | 1 |
-| hc1.vacationmode | vacation mode | boolean |   | false | HC | 25 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-int8
-| hc1.tempautotemp | temporary set temperature automode | int8 (>=-1<=30) | C | true | HC | 28 | 1 | 1/2 |
-int8
-| hc1.cooltemp | cooling temperature | int8 (>=-1<=30) | C | true | HC | 29 | 1 | 1/2 |
-uint8
-| hc1.fastheatup | fast heatup | uint8 (>=0<=0) | % | true | HC | 30 | 1 | 1 |
-uint8
-| hc1.comfoffset | comfort point offset | uint8 (>=0<=10) | C | true | HC | 31 | 1 | 1 |
-int8
-| hc1.comftemp | comfort point temperature | int8 (>=-5<=15) | C | true | HC | 32 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.reducemode | reduce mode | enum |   | true | HC | 34 | 1 | 1 |
-int8
-| hc1.noreducetemp | no reduce below temperature | int8 (>=0<=0) | C | true | HC | 35 | 1 | 1 |
-int8
-| hc1.reducetemp | off/reduce switch temperature | int8 (>=0<=0) | C | true | HC | 36 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 37 | 1 | 1 |
-| hc1.hpcooling | hp cooling | boolean |   | true | HC | 38 | 1 | 1 |
-| hc1.coolingon | cooling on | boolean |   | false | HC | 39 | 1 | 1 |
-| hc1.hpmode | HP Mode | enum |   | true | HC | 40 | 1 | 1 |
-uint8
-| hc1.dewoffset | dew point offset | uint8 (>=2<=10) | K | true | HC | 41 | 1 | 1 |
-uint8
-| hc1.roomtempdiff | room temp difference | uint8 (>=0<=0) | K | true | HC | 42 | 1 | 1 |
-uint8
-| hc1.hpminflowtemp | HP min. flow temp. | uint8 (>=0<=0) | C | true | HC | 43 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.remotehum | room humidity from remote | cmd | % | true | HC | 46 | 1 | 1 |
-uint8
-| hc1.heatondelay | heat-on delay | uint8 (>=1<=48) | hours | true | HC | 47 | 1 | 1 |
-uint8
-| hc1.heatoffdelay | heat-off delay | uint8 (>=1<=48) | hours | true | HC | 48 | 1 | 1 |
-uint8
-| hc1.coolondelay | cooling on delay | uint8 (>=1<=48) | hours | true | HC | 49 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (>=1<=48) | hours | true | HC | 50 | 1 | 1 |
-uint8
-| hc1.instantstart | instant start | uint8 (>=1<=10) | K | true | HC | 51 | 1 | 1 |
-uint8
-| hc1.coolstart | cooling starttemp | uint8 (>=20<=35) | C | true | HC | 52 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.boosttime | boost time | uint8 (>=0<=0) | hours | true | HC | 54 | 1 | 1 |
-| hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
-int8
-| hc1.redthreshold | reduction threshold | int8 (>=12<=22) | C | true | HC | 56 | 1 | 1/2 |
-int8
-| hc1.solarinfl | solar influence | int8 (>=-5<=0) | C | true | HC | 57 | 1 | 1 |
-| hc1.currsolarinfl | current solar influence | int8 | C | false | HC | 58 | 1 | 1/10 |
-| hc1.heatingpid | heating PID | enum |   | true | HC | 59 | 1 | 1 |
-| hc1.pumpopt | pump optimization | boolean |   | true | HC | 60 | 1 | 1 |
-uint8
-| hc1.inttimefloor | integral time floor | uint8 (>=160<=320) | minutes | true | HC | 61 | 1 | 10 |
-uint8
-| hc1.inttime | integral time | uint8 (>=3<=80) | minutes | true | HC | 62 | 1 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| dhw.modetype | mode type | enum |   | false | DHW | 1 | 1 | 1 |
-uint8
-| dhw.settemp | set temperature | uint8 (>=0<=0) | C | true | DHW | 2 | 1 | 1 |
-uint8
-| dhw.settemplow | set low temperature | uint8 (>=0<=0) | C | true | DHW | 3 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 4 | 1 | 1 |
-uint8
-| dhw.chargeduration | charge duration | uint8 (>=0<=0) | minutes | true | DHW | 5 | 1 | 15 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-| dhw.extra | extra | boolean |   | false | DHW | 7 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 8 | 1 | 1 |
-| dhw.disinfectday | disinfection day | enum |   | true | DHW | 9 | 1 | 1 |
-uint8
-| dhw.disinfecttime | disinfection time | uint8 (>=0<=1431) | minutes | true | DHW | 10 | 1 | 15 |
-| dhw.dailyheating | daily heating | boolean |   | true | DHW | 11 | 1 | 1 |
-uint8
-| dhw.dailyheattime | daily heating time | uint8 (>=0<=1431) | minutes | true | DHW | 12 | 1 | 15 |
-
-### Comfort RF
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-| hc1.seltemp | selected room temperature | int16 | C | false | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | false | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-
-### CRF200S
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-| hc1.seltemp | selected room temperature | int16 | C | false | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | false | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-
-### Comfort+2RF
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-| hc1.seltemp | selected room temperature | int16 | C | false | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | false | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-
-### Rego 3000, UI800, Logamatic BC400
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=0<=0) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-| floordry | floor drying | enum |   | false | DEVICE_DATA | 47 | 1 | 1 |
-| dampedoutdoortemp | damped outdoor temperature | int16 | C | false | DEVICE_DATA | 48 | 1 | 1/10 |
-| floordrytemp | floor drying temperature | uint8 | C | false | DEVICE_DATA | 49 | 1 | 1 |
-| building | building type | enum |   | true | DEVICE_DATA | 50 | 1 | 1 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| damping | damping outdoor temperature | boolean |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| solar | solar | boolean |   | true | DEVICE_DATA | 53 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-| pvenabledhw | enable raise dhw | boolean |   | true | DEVICE_DATA | 61 | 1 | 1 |
-int8
-| pvraiseheat | raise heating with PV | int8 (>=0<=5) | K | true | DEVICE_DATA | 62 | 1 | 1 |
-int8
-| pvlowercool | lower cooling with PV | int8 (>=-5<=0) | K | true | DEVICE_DATA | 63 | 1 | 1 |
-| absent | absent | boolean |   | true | DEVICE_DATA | 64 | 1 | 1 |
-| hpoperatingmode | heatpump operating mode | enum |   | true | DEVICE_DATA | 89 | 1 | 1 |
-uint8
-| summertemp | summer temperature | uint8 (>=10<=30) | C | true | DEVICE_DATA | 90 | 1 | 1 |
-uint8
-| instantstart | instant start | uint8 (>=1<=10) | K | true | DEVICE_DATA | 91 | 1 | 1 |
-uint8
-| coolstart | cooling starttemp | uint8 (>=24<=35) | C | true | DEVICE_DATA | 92 | 1 | 1 |
-uint8
-| heatondelay | heat-on delay | uint8 (>=1<=48) | hours | true | DEVICE_DATA | 93 | 1 | 1/4 |
-uint8
-| heatoffdelay | heat-off delay | uint8 (>=1<=48) | hours | true | DEVICE_DATA | 94 | 1 | 1/4 |
-uint8
-| coolondelay | cooling on delay | uint8 (>=1<=48) | hours | true | DEVICE_DATA | 95 | 1 | 1/4 |
-uint8
-| cooloffdelay | cooling off delay | uint8 (>=1<=48) | hours | true | DEVICE_DATA | 96 | 1 | 1/4 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-uint8
-| hc1.manualtemp | manual temperature | uint8 (>=0<=0) | C | true | HC | 6 | 1 | 1/2 |
-uint8
-| hc1.comforttemp | comfort temperature | uint8 (>=0<=0) | C | true | HC | 7 | 1 | 1/2 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=10<=30) | C | true | HC | 8 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=0<=0) | C | true | HC | 9 | 1 | 1 |
-int8
-| hc1.offsettemp | offset temperature | int8 (>=0<=0) | C | true | HC | 10 | 1 | 1 |
-uint8
-| hc1.baseflowtemp | base flow temperature | uint8 (>=0<=0) | C | true | HC | 11 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=0<=0) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=0<=0) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.roominfluence | room influence | uint8 (>=0<=0) | C | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) |   | true | HC | 15 | 1 | 1/10 |
-| hc1.curroominfl | current room influence | int16 | C | false | HC | 16 | 1 | 1/10 |
-| hc1.nofrostmode | nofrost mode | enum |   | true | HC | 17 | 1 | 1 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.summersetmode | set summer mode | enum |   | true | HC | 21 | 1 | 1 |
-| hc1.hpoperatingmode | heatpump operating mode | enum |   | true | HC | 22 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-| hc1.hpoperatingstate | heatpump operating state | enum |   | false | HC | 24 | 1 | 1 |
-| hc1.vacationmode | vacation mode | boolean |   | false | HC | 25 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-int8
-| hc1.tempautotemp | temporary set temperature automode | int8 (>=-1<=30) | C | true | HC | 28 | 1 | 1/2 |
-int8
-| hc1.cooltemp | cooling temperature | int8 (>=-1<=30) | C | true | HC | 29 | 1 | 1/2 |
-uint8
-| hc1.fastheatup | fast heatup | uint8 (>=0<=0) | % | true | HC | 30 | 1 | 1 |
-uint8
-| hc1.comfoffset | comfort point offset | uint8 (>=0<=10) | C | true | HC | 31 | 1 | 1 |
-int8
-| hc1.comftemp | comfort point temperature | int8 (>=-5<=15) | C | true | HC | 32 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.reducemode | reduce mode | enum |   | true | HC | 34 | 1 | 1 |
-int8
-| hc1.noreducetemp | no reduce below temperature | int8 (>=0<=0) | C | true | HC | 35 | 1 | 1 |
-int8
-| hc1.reducetemp | off/reduce switch temperature | int8 (>=0<=0) | C | true | HC | 36 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 37 | 1 | 1 |
-| hc1.hpcooling | hp cooling | boolean |   | true | HC | 38 | 1 | 1 |
-| hc1.coolingon | cooling on | boolean |   | false | HC | 39 | 1 | 1 |
-| hc1.hpmode | HP Mode | enum |   | true | HC | 40 | 1 | 1 |
-uint8
-| hc1.dewoffset | dew point offset | uint8 (>=2<=10) | K | true | HC | 41 | 1 | 1 |
-uint8
-| hc1.roomtempdiff | room temp difference | uint8 (>=0<=0) | K | true | HC | 42 | 1 | 1 |
-uint8
-| hc1.hpminflowtemp | HP min. flow temp. | uint8 (>=0<=0) | C | true | HC | 43 | 1 | 1 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.remotehum | room humidity from remote | cmd | % | true | HC | 46 | 1 | 1 |
-uint8
-| hc1.heatondelay | heat-on delay | uint8 (>=1<=48) | hours | true | HC | 47 | 1 | 1 |
-uint8
-| hc1.heatoffdelay | heat-off delay | uint8 (>=1<=48) | hours | true | HC | 48 | 1 | 1 |
-uint8
-| hc1.coolondelay | cooling on delay | uint8 (>=1<=48) | hours | true | HC | 49 | 1 | 1 |
-uint8
-| hc1.cooloffdelay | cooling off delay | uint8 (>=1<=48) | hours | true | HC | 50 | 1 | 1 |
-uint8
-| hc1.instantstart | instant start | uint8 (>=1<=10) | K | true | HC | 51 | 1 | 1 |
-uint8
-| hc1.coolstart | cooling starttemp | uint8 (>=20<=35) | C | true | HC | 52 | 1 | 1 |
-| hc1.boost | boost mode | boolean |   | true | HC | 53 | 1 | 1 |
-uint8
-| hc1.boosttime | boost time | uint8 (>=0<=0) | hours | true | HC | 54 | 1 | 1 |
-| hc1.switchprogmode | switch program mode | enum |   | true | HC | 55 | 1 | 1 |
-int8
-| hc1.redthreshold | reduction threshold | int8 (>=12<=22) | C | true | HC | 56 | 1 | 1/2 |
-int8
-| hc1.solarinfl | solar influence | int8 (>=-5<=0) | C | true | HC | 57 | 1 | 1 |
-| hc1.currsolarinfl | current solar influence | int8 | C | false | HC | 58 | 1 | 1/10 |
-| hc1.heatingpid | heating PID | enum |   | true | HC | 59 | 1 | 1 |
-| hc1.pumpopt | pump optimization | boolean |   | true | HC | 60 | 1 | 1 |
-uint8
-| hc1.inttimefloor | integral time floor | uint8 (>=160<=320) | minutes | true | HC | 61 | 1 | 10 |
-uint8
-| hc1.inttime | integral time | uint8 (>=3<=80) | minutes | true | HC | 62 | 1 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| dhw.modetype | mode type | enum |   | false | DHW | 1 | 1 | 1 |
-uint8
-| dhw.settemp | set temperature | uint8 (>=0<=0) | C | true | DHW | 2 | 1 | 1 |
-uint8
-| dhw.settemplow | set low temperature | uint8 (>=0<=0) | C | true | DHW | 3 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 4 | 1 | 1 |
-uint8
-| dhw.chargeduration | charge duration | uint8 (>=0<=0) | minutes | true | DHW | 5 | 1 | 15 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-| dhw.extra | extra | boolean |   | false | DHW | 7 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 8 | 1 | 1 |
-| dhw.disinfectday | disinfection day | enum |   | true | DHW | 9 | 1 | 1 |
-uint8
-| dhw.disinfecttime | disinfection time | uint8 (>=0<=1431) | minutes | true | DHW | 10 | 1 | 15 |
-| dhw.dailyheating | daily heating | boolean |   | true | DHW | 11 | 1 | 1 |
-uint8
-| dhw.dailyheattime | daily heating time | uint8 (>=0<=1431) | minutes | true | DHW | 12 | 1 | 15 |
-
-### ES72, RC20
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=0<=0) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=0<=0) | C | true | HC | 64 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=0<=0) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=0<=0) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.tempautotemp | temporary set temperature automode | uint8 (>=0<=0) | C | true | HC | 28 | 1 | 1/2 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=10<=30) | C | true | HC | 8 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=0<=0) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=0<=0) | C | true | HC | 64 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=0<=0) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=0<=0) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.tempautotemp | temporary set temperature automode | uint8 (>=0<=0) | C | true | HC | 28 | 1 | 1/2 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=10<=30) | C | true | HC | 8 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-
-### ES73
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-| display | display | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| language | language | enum |   | false | DEVICE_DATA | 66 | 1 | 1 |
-int8
-| clockoffset | clock offset | int8 (>=0<=0) | seconds | true | DEVICE_DATA | 67 | 1 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=0<=0) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| inttemp1 | temperature sensor 1 | int16 | C | false | DEVICE_DATA | 68 | 1 | 1/10 |
-| inttemp2 | temperature sensor 2 | int16 | C | false | DEVICE_DATA | 69 | 1 | 1/10 |
-| damping | damping outdoor temperature | boolean |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| dampedoutdoortemp | damped outdoor temperature | int8 | C | false | DEVICE_DATA | 48 | 1 | 1 |
-| building | building type | enum |   | true | DEVICE_DATA | 50 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=10<=30) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=10<=30) | C | true | HC | 64 | 1 | 1/2 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-int8
-| hc1.offsettemp | offset temperature | int8 (>=-5<=5) | C | true | HC | 10 | 1 | 1/2 |
-uint8
-| hc1.holidaytemp | holiday temperature | uint8 (>=5<=30) | C | true | HC | 65 | 1 | 1/2 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-| hc1.holidaymode | holiday mode | boolean |   | false | HC | 66 | 1 | 1 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=-20<=10) | C | true | HC | 18 | 1 | 1 |
-| hc1.nofrostmode | nofrost mode | enum |   | true | HC | 17 | 1 | 1 |
-uint8
-| hc1.roominfluence | room influence | uint8 (>=0<=10) | C | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.flowtempoffset | flow temperature offset for mixer | uint8 (>=0<=20) | C | true | HC | 67 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.reducemode | reduce mode | enum |   | true | HC | 34 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
-| hc1.holidays | holiday dates | string |   | true | HC | 68 | 13 | 1 |
-| hc1.vacations | vacation dates | string |   | true | HC | 81 | 13 | 1 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-uint8
-| hc1.pause | pause time | uint8 (>=0<=99) | hours | true | HC | 94 | 1 | 1 |
-uint8
-| hc1.party | party time | uint8 (>=0<=99) | hours | true | HC | 95 | 1 | 1 |
-uint8
-| hc1.tempautotemp | temporary set temperature automode | uint8 (>=0<=30) | C | true | HC | 28 | 1 | 1/2 |
-int8
-| hc1.noreducetemp | no reduce below temperature | int8 (>=-31<=10) | C | true | HC | 35 | 1 | 1 |
-int8
-| hc1.reducetemp | off/reduce switch temperature | int8 (>=-20<=10) | C | true | HC | 36 | 1 | 1 |
-int8
-| hc1.vacreducetemp | vacations off/reduce switch temperature | int8 (>=-20<=10) | C | true | HC | 96 | 1 | 1 |
-| hc1.vacreducemode | vacations reduce mode | enum |   | true | HC | 97 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 37 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.switchtime1 | own1 program switchtime | string |   | true | HC | 98 | 8 | 1 |
-| hc1.switchtime2 | own2 program switchtime | string |   | true | HC | 106 | 8 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 4 | 1 | 1 |
-| dhw.progmode | program | enum |   | true | DHW | 13 | 1 | 1 |
-| dhw.circprog | circulation program | enum |   | true | DHW | 14 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 8 | 1 | 1 |
-| dhw.disinfectday | disinfection day | enum |   | true | DHW | 9 | 1 | 1 |
-uint8
-| dhw.disinfecthour | disinfection hour | uint8 (>=0<=23) |   | true | DHW | 15 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=0) | C | true | DHW | 16 | 1 | 1 |
-| dhw.onetimekey | one time key function | boolean |   | true | DHW | 17 | 1 | 1 |
-| dhw.switchtime | program switchtime | string |   | true | DHW | 18 | 8 | 1 |
-| dhw.circswitchtime | circulation program switchtime | string |   | true | DHW | 26 | 8 | 1 |
-| dhw.holidays | holiday dates | string |   | true | DHW | 34 | 13 | 1 |
-| dhw.vacations | vacation dates | string |   | true | DHW | 47 | 13 | 1 |
-
-### ES79
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-int8
-| intoffset | internal temperature offset | int8 (>=-5<=5) | C | true | DEVICE_DATA | 46 | 1 | 1/10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=-30<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| inttemp1 | temperature sensor 1 | int16 | C | false | DEVICE_DATA | 68 | 1 | 1/10 |
-| inttemp2 | temperature sensor 2 | int16 | C | false | DEVICE_DATA | 69 | 1 | 1/10 |
-| damping | damping outdoor temperature | boolean |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| dampedoutdoortemp | damped outdoor temperature | int8 | C | false | DEVICE_DATA | 48 | 1 | 1 |
-| building | building type | enum |   | true | DEVICE_DATA | 50 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.daytemp | day temperature | uint8 (>=10<=30) | C | true | HC | 63 | 1 | 1/2 |
-uint8
-| hc1.nighttemp | night temperature | uint8 (>=10<=30) | C | true | HC | 64 | 1 | 1/2 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-int8
-| hc1.offsettemp | offset temperature | int8 (>=-5<=5) | C | true | HC | 10 | 1 | 1/2 |
-uint8
-| hc1.holidaytemp | holiday temperature | uint8 (>=5<=30) | C | true | HC | 65 | 1 | 1/2 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1 |
-| hc1.summermode | summer mode | enum |   | false | HC | 23 | 1 | 1 |
-| hc1.holidaymode | holiday mode | boolean |   | false | HC | 66 | 1 | 1 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=-20<=10) | C | true | HC | 18 | 1 | 1 |
-| hc1.nofrostmode | nofrost mode | enum |   | true | HC | 17 | 1 | 1 |
-uint8
-| hc1.roominfluence | room influence | uint8 (>=0<=10) | C | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.flowtempoffset | flow temperature offset for mixer | uint8 (>=0<=20) | C | true | HC | 67 | 1 | 1 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.reducemode | reduce mode | enum |   | true | HC | 34 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| hc1.control | control device | enum |   | true | HC | 44 | 1 | 1 |
-| hc1.holidays | holiday dates | string |   | true | HC | 68 | 13 | 1 |
-| hc1.vacations | vacation dates | string |   | true | HC | 81 | 13 | 1 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-uint8
-| hc1.pause | pause time | uint8 (>=0<=99) | hours | true | HC | 94 | 1 | 1 |
-uint8
-| hc1.party | party time | uint8 (>=0<=99) | hours | true | HC | 95 | 1 | 1 |
-uint8
-| hc1.tempautotemp | temporary set temperature automode | uint8 (>=0<=30) | C | true | HC | 28 | 1 | 1/2 |
-int8
-| hc1.noreducetemp | no reduce below temperature | int8 (>=-31<=10) | C | true | HC | 35 | 1 | 1 |
-int8
-| hc1.reducetemp | off/reduce switch temperature | int8 (>=-20<=10) | C | true | HC | 36 | 1 | 1 |
-int8
-| hc1.vacreducetemp | vacations off/reduce switch temperature | int8 (>=-20<=10) | C | true | HC | 96 | 1 | 1 |
-| hc1.vacreducemode | vacations reduce mode | enum |   | true | HC | 97 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 37 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.switchtime1 | own1 program switchtime | string |   | true | HC | 98 | 8 | 1 |
-| hc1.switchtime2 | own2 program switchtime | string |   | true | HC | 106 | 8 | 1 |
-| dhw.mode | operating mode | enum |   | true | DHW | 0 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 4 | 1 | 1 |
-| dhw.progmode | program | enum |   | true | DHW | 13 | 1 | 1 |
-| dhw.circprog | circulation program | enum |   | true | DHW | 14 | 1 | 1 |
-| dhw.disinfecting | disinfecting | boolean |   | true | DHW | 8 | 1 | 1 |
-| dhw.disinfectday | disinfection day | enum |   | true | DHW | 9 | 1 | 1 |
-uint8
-| dhw.disinfecthour | disinfection hour | uint8 (>=0<=23) |   | true | DHW | 15 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=60<=80) | C | true | DHW | 16 | 1 | 1 |
-| dhw.onetimekey | one time key function | boolean |   | true | DHW | 17 | 1 | 1 |
-| dhw.switchtime | program switchtime | string |   | true | DHW | 18 | 8 | 1 |
-| dhw.circswitchtime | circulation program switchtime | string |   | true | DHW | 26 | 8 | 1 |
-| dhw.holidays | holiday dates | string |   | true | DHW | 34 | 13 | 1 |
-| dhw.vacations | vacation dates | string |   | true | DHW | 47 | 13 | 1 |
-
-### FW100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-| display | display | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| language | language | enum |   | true | DEVICE_DATA | 66 | 1 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### FW200
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-| display | display | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| language | language | enum |   | true | DEVICE_DATA | 66 | 1 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### FR100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### FR110
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### FB10
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-| display | display | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| language | language | enum |   | true | DEVICE_DATA | 66 | 1 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### FB100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-| display | display | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| language | language | enum |   | true | DEVICE_DATA | 66 | 1 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### FR10
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### FW500
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-| display | display | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| language | language | enum |   | true | DEVICE_DATA | 66 | 1 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### FR50
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### FR120
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### FW120
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | true | DEVICE_DATA | 33 | 13 | 1 |
-| display | display | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| language | language | enum |   | true | DEVICE_DATA | 66 | 1 | 1 |
-uint8
-| building | building type | uint8 (>=0<=0) | % | true | DEVICE_DATA | 50 | 1 | 10 |
-int8
-| minexttemp | minimal external temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 51 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 54 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=-20<=20) | C | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| energycostratio | energy cost ratio | uint8 (>=0<=20) |   | true | DEVICE_DATA | 56 | 1 | 1/10 |
-uint8
-| fossilefactor | fossile energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| electricfactor | electric energy factor | uint8 (>=0<=5) |   | true | DEVICE_DATA | 58 | 1 | 1/10 |
-uint8
-| delayboiler | delay boiler support | uint8 (>=5<=120) | minutes | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| tempdiffboiler | temp diff boiler support | uint8 (>=1<=99) | C | true | DEVICE_DATA | 60 | 1 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/10 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-| hc1.mode | operating mode | enum |   | true | HC | 3 | 1 | 1 |
-| hc1.modetype | mode type | enum |   | false | HC | 4 | 1 | 1 |
-uint8
-| hc1.heattemp | heat temperature | uint8 (>=0<=0) | C | true | HC | 205 | 1 | 1/2 |
-uint8
-| hc1.ecotemp | eco temperature | uint8 (>=0<=0) | C | true | HC | 5 | 1 | 1/2 |
-int8
-| hc1.nofrosttemp | nofrost temperature | int8 (>=0<=0) | C | true | HC | 18 | 1 | 1/2 |
-| hc1.program | program | enum |   | true | HC | 27 | 1 | 1 |
-| hc1.remotetemp | room temperature from remote | cmd | C | true | HC | 45 | 1 | 1/10 |
-| hc1.targetflowtemp | target flow temperature | uint8 | C | false | HC | 19 | 1 | 1 |
-uint8
-| hc1.summertemp | summer temperature | uint8 (>=9<=25) | C | true | HC | 8 | 1 | 1/2 |
-| hc1.roomsensor | room sensor | enum |   | true | HC | 206 | 1 | 1 |
-| hc1.holidaymode | holiday mode | enum |   | true | HC | 66 | 1 | 1 |
-| hc1.switchonoptimization | switch-on optimization | boolean |   | true | HC | 33 | 1 | 1 |
-| hc1.heatup | heatup | enum |   | true | HC | 207 | 1 | 1 |
-uint8
-| hc1.minflowtemp | min flow temperature | uint8 (>=5<=70) | C | true | HC | 12 | 1 | 1 |
-uint8
-| hc1.maxflowtemp | max flow temperature | uint8 (>=30<=90) | C | true | HC | 13 | 1 | 1 |
-uint8
-| hc1.designtemp | design temperature | uint8 (>=30<=90) | C | true | HC | 9 | 1 | 1 |
-| hc1.roominfluence | room influence | enum |   | true | HC | 14 | 1 | 1 |
-uint8
-| hc1.roominflfactor | room influence factor | uint8 (>=0<=0) | % | true | HC | 15 | 1 | 10 |
-| hc1.heatingtype | heating type | enum |   | true | HC | 20 | 1 | 1 |
-| hc1.controlmode | control mode | enum |   | true | HC | 26 | 1 | 1 |
-| dhw.charge | charge | boolean |   | true | DHW | 6 | 1 | 1 |
-
-### RT800, RC220
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-
-### RC100H, CR10H
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-
-### RC120RF, TR120RF, CR20RF
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| errorcode | error code | string |   | false | DEVICE_DATA | 0 | 8 | 1 |
-| lastcode | last error code | string |   | false | DEVICE_DATA | 8 | 25 | 1 |
-| datetime | date/time | string |   | false | DEVICE_DATA | 33 | 13 | 1 |
-int16
-| hc1.seltemp | selected room temperature | int16 (>=0<=30) | C | true | HC | 0 | 1 | 1/2 |
-| hc1.currtemp | current room temperature | int16 | C | false | HC | 1 | 1 | 1/10 |
-| hc1.haclimate | mqtt discovery current room temperature | enum |   | false | HC | 2 | 1 | 1 |
-
-## Devices of type \_mixer
-
-### XCUMixer
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| hc1.flowtemphc | flow temperature (TC1) | uint16 | C | false | HC | 0 | 1 | 1/10 |
-| hc1.valvestatus | mixing valve actuator (VC1) | uint8 | % | false | HC | 1 | 1 | 1 |
-uint8
-| hc1.flowsettemp | setpoint flow temperature | uint8 (>=0<=0) | C | true | HC | 2 | 1 | 1 |
-| hc1.pumpstatus | pump status (PC1) | boolean |   | true | HC | 3 | 1 | 1 |
-| hc1.activated | activated | boolean |   | true | HC | 4 | 1 | 1 |
-| hc1.flow | Durchfluss | uint16 | l/h | false | HC | 5 | 1 | 1 |
-uint8
-| hc1.setdiffpress | set differential pressure | uint8 (>=0<=0) | mbar | true | HC | 6 | 1 | 50 |
-uint8
-| hc1.valvesettime | time to set valve | uint8 (>=10<=600) | seconds | true | HC | 7 | 1 | 10 |
-uint8
-| hc1.flowtempoffset | flow temperature offset for mixer | uint8 (>=0<=20) | K | true | HC | 8 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 9 | 1 | 1 |
-
-### MM10
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| hc1.flowtemphc | flow temperature (TC1) | uint16 | C | false | HC | 0 | 1 | 1/10 |
-| hc1.valvestatus | mixing valve actuator (VC1) | int8 | % | false | HC | 1 | 1 | 1 |
-uint8
-| hc1.flowsettemp | setpoint flow temperature | uint8 (>=0<=0) | C | true | HC | 2 | 1 | 1 |
-| hc1.pumpstatus | pump status (PC1) | boolean |   | true | HC | 3 | 1 | 1 |
-| hc1.activated | activated | boolean |   | true | HC | 4 | 1 | 1 |
-uint8
-| hc1.valvesettime | time to set valve | uint8 (>=10<=600) | seconds | true | HC | 7 | 1 | 10 |
-
-### IPM
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| hc1.flowtemphc | flow temperature (TC1) | uint16 | C | false | HC | 0 | 1 | 1/10 |
-| hc1.valvestatus | mixing valve actuator (VC1) | uint8 | % | false | HC | 1 | 1 | 1 |
-uint8
-| hc1.flowsettemp | setpoint flow temperature | uint8 (>=0<=0) | C | true | HC | 2 | 1 | 1 |
-| hc1.pumpstatus | pump status (PC1) | boolean |   | true | HC | 3 | 1 | 1 |
-| hc1.flowtempvf | flow temperature in header (T0/Vf) | uint16 | C | false | HC | 10 | 1 | 1/10 |
-
-### IPM2
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| hc1.flowtemphc | flow temperature (TC1) | uint16 | C | false | HC | 0 | 1 | 1/10 |
-| hc1.valvestatus | mixing valve actuator (VC1) | uint8 | % | false | HC | 1 | 1 | 1 |
-uint8
-| hc1.flowsettemp | setpoint flow temperature | uint8 (>=0<=0) | C | true | HC | 2 | 1 | 1 |
-| hc1.pumpstatus | pump status (PC1) | boolean |   | true | HC | 3 | 1 | 1 |
-| hc1.flowtempvf | flow temperature in header (T0/Vf) | uint16 | C | false | HC | 10 | 1 | 1/10 |
-
-### MM50
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| hc1.flowtemphc | flow temperature (TC1) | uint16 | C | false | HC | 0 | 1 | 1/10 |
-| hc1.valvestatus | mixing valve actuator (VC1) | uint8 | % | false | HC | 1 | 1 | 1 |
-uint8
-| hc1.flowsettemp | setpoint flow temperature | uint8 (>=0<=0) | C | true | HC | 2 | 1 | 1 |
-| hc1.pumpstatus | pump status (PC1) | boolean |   | true | HC | 3 | 1 | 1 |
-| hc1.activated | activated | boolean |   | true | HC | 4 | 1 | 1 |
-| hc1.flow | Durchfluss | uint16 | l/h | false | HC | 5 | 1 | 1 |
-uint8
-| hc1.setdiffpress | set differential pressure | uint8 (>=0<=0) | mbar | true | HC | 6 | 1 | 50 |
-uint8
-| hc1.valvesettime | time to set valve | uint8 (>=10<=600) | seconds | true | HC | 7 | 1 | 10 |
-uint8
-| hc1.flowtempoffset | flow temperature offset for mixer | uint8 (>=0<=20) | K | true | HC | 8 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 9 | 1 | 1 |
-
-### MM100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| hc1.flowtemphc | flow temperature (TC1) | uint16 | C | false | HC | 0 | 1 | 1/10 |
-| hc1.valvestatus | mixing valve actuator (VC1) | uint8 | % | false | HC | 1 | 1 | 1 |
-uint8
-| hc1.flowsettemp | setpoint flow temperature | uint8 (>=0<=0) | C | true | HC | 2 | 1 | 1 |
-| hc1.pumpstatus | pump status (PC1) | boolean |   | true | HC | 3 | 1 | 1 |
-| hc1.activated | activated | boolean |   | true | HC | 4 | 1 | 1 |
-| hc1.flow | Durchfluss | uint16 | l/h | false | HC | 5 | 1 | 1 |
-uint8
-| hc1.setdiffpress | set differential pressure | uint8 (>=0<=0) | mbar | true | HC | 6 | 1 | 50 |
-uint8
-| hc1.valvesettime | time to set valve | uint8 (>=10<=600) | seconds | true | HC | 7 | 1 | 10 |
-uint8
-| hc1.flowtempoffset | flow temperature offset for mixer | uint8 (>=0<=20) | K | true | HC | 8 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 9 | 1 | 1 |
-
-### MM200
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| hc1.flowtemphc | flow temperature (TC1) | uint16 | C | false | HC | 0 | 1 | 1/10 |
-| hc1.valvestatus | mixing valve actuator (VC1) | uint8 | % | false | HC | 1 | 1 | 1 |
-uint8
-| hc1.flowsettemp | setpoint flow temperature | uint8 (>=0<=0) | C | true | HC | 2 | 1 | 1 |
-| hc1.pumpstatus | pump status (PC1) | boolean |   | true | HC | 3 | 1 | 1 |
-| hc1.activated | activated | boolean |   | true | HC | 4 | 1 | 1 |
-| hc1.flow | Durchfluss | uint16 | l/h | false | HC | 5 | 1 | 1 |
-uint8
-| hc1.setdiffpress | set differential pressure | uint8 (>=0<=0) | mbar | true | HC | 6 | 1 | 50 |
-uint8
-| hc1.valvesettime | time to set valve | uint8 (>=10<=600) | seconds | true | HC | 7 | 1 | 10 |
-uint8
-| hc1.flowtempoffset | flow temperature offset for mixer | uint8 (>=0<=20) | K | true | HC | 8 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 9 | 1 | 1 |
-
-### MZ100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| hc1.flowtemphc | flow temperature (TC1) | uint16 | C | false | HC | 0 | 1 | 1/10 |
-| hc1.valvestatus | mixing valve actuator (VC1) | uint8 | % | false | HC | 1 | 1 | 1 |
-uint8
-| hc1.flowsettemp | setpoint flow temperature | uint8 (>=0<=0) | C | true | HC | 2 | 1 | 1 |
-| hc1.pumpstatus | pump status (PC1) | boolean |   | true | HC | 3 | 1 | 1 |
-| hc1.activated | activated | boolean |   | true | HC | 4 | 1 | 1 |
-| hc1.flow | Durchfluss | uint16 | l/h | false | HC | 5 | 1 | 1 |
-uint8
-| hc1.setdiffpress | set differential pressure | uint8 (>=0<=0) | mbar | true | HC | 6 | 1 | 50 |
-uint8
-| hc1.valvesettime | time to set valve | uint8 (>=10<=600) | seconds | true | HC | 7 | 1 | 10 |
-uint8
-| hc1.flowtempoffset | flow temperature offset for mixer | uint8 (>=0<=20) | K | true | HC | 8 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 9 | 1 | 1 |
-
-### HM210
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| hc1.flowtemphc | flow temperature (TC1) | uint16 | C | false | HC | 0 | 1 | 1/10 |
-| hc1.valvestatus | mixing valve actuator (VC1) | uint8 | % | false | HC | 1 | 1 | 1 |
-uint8
-| hc1.flowsettemp | setpoint flow temperature | uint8 (>=0<=0) | C | true | HC | 2 | 1 | 1 |
-| hc1.pumpstatus | pump status (PC1) | boolean |   | true | HC | 3 | 1 | 1 |
-| hc1.activated | activated | boolean |   | true | HC | 4 | 1 | 1 |
-| hc1.flow | Durchfluss | uint16 | l/h | false | HC | 5 | 1 | 1 |
-uint8
-| hc1.setdiffpress | set differential pressure | uint8 (>=0<=0) | mbar | true | HC | 6 | 1 | 50 |
-uint8
-| hc1.valvesettime | time to set valve | uint8 (>=10<=600) | seconds | true | HC | 7 | 1 | 10 |
-uint8
-| hc1.flowtempoffset | flow temperature offset for mixer | uint8 (>=0<=20) | K | true | HC | 8 | 1 | 1 |
-| hc1.dhwprio | dhw priority | boolean |   | true | HC | 9 | 1 | 1 |
-
-## Devices of type \_solar
-
-### SM10
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| collectortemp | collector temperature (TS1) | int16 | C | false | DEVICE_DATA | 0 | 1 | 1/10 |
-| cylbottomtemp | cylinder bottom temperature (TS2) | int16 | C | false | DEVICE_DATA | 1 | 1 | 1/10 |
-| solarpump | pump (PS1) | boolean |   | false | DEVICE_DATA | 2 | 1 | 1 |
-| pumpworktime | pump working time | time | minutes | false | DEVICE_DATA | 3 | 2 | 1 |
-uint8
-| cylmaxtemp | maximum cylinder temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| collectorshutdown | collector shutdown | boolean |   | false | DEVICE_DATA | 6 | 1 | 1 |
-| cylheated | cyl heated | boolean |   | false | DEVICE_DATA | 7 | 1 | 1 |
-| solarpumpmod | pump modulation (PS1) | uint8 | % | false | DEVICE_DATA | 8 | 1 | 1 |
-uint8
-| pumpminmod | minimum pump modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 9 | 1 | 1 |
-uint8
-| turnondiff | pump turn on difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 10 | 1 | 1 |
-uint8
-| turnoffdiff | pump turn off difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 11 | 1 | 1 |
-| solarpower | actual solar power | int16 | W | false | DEVICE_DATA | 12 | 1 | 1 |
-| energylasthour | energy last hour | uint24 | Wh | false | DEVICE_DATA | 13 | 2 | 1/10 |
-uint8
-| maxflow | maximum solar flow | uint8 (>=0<=0) | l/min | true | DEVICE_DATA | 15 | 1 | 1/10 |
-uint8
-| dhw.mintemp | minimum temperature | uint8 (>=0<=0) | C | true | DHW | 0 | 1 | 1 |
-| solarenabled | solarmodule enabled | boolean |   | true | DEVICE_DATA | 16 | 1 | 1 |
-
-### ISM1
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| collectortemp | collector temperature (TS1) | int16 | C | false | DEVICE_DATA | 0 | 1 | 1/10 |
-| cylbottomtemp | cylinder bottom temperature (TS2) | int16 | C | false | DEVICE_DATA | 1 | 1 | 1/10 |
-| solarpump | pump (PS1) | boolean |   | false | DEVICE_DATA | 2 | 1 | 1 |
-| pumpworktime | pump working time | time | minutes | false | DEVICE_DATA | 3 | 2 | 1 |
-uint8
-| cylmaxtemp | maximum cylinder temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| collectorshutdown | collector shutdown | boolean |   | false | DEVICE_DATA | 6 | 1 | 1 |
-| cylheated | cyl heated | boolean |   | false | DEVICE_DATA | 7 | 1 | 1 |
-| cylmiddletemp | cylinder middle temperature (TS14) | int16 | C | false | DEVICE_DATA | 17 | 1 | 1/10 |
-| retheatassist | return temperature heat assistance (TS4) | int16 | C | false | DEVICE_DATA | 18 | 1 | 1/10 |
-| heatassistvalve | heat assistance valve (M1) | boolean |   | false | DEVICE_DATA | 19 | 1 | 1 |
-| energylasthour | energy last hour | uint24 | Wh | false | DEVICE_DATA | 13 | 2 | 1/10 |
-
-### ISM2
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| collectortemp | collector temperature (TS1) | int16 | C | false | DEVICE_DATA | 0 | 1 | 1/10 |
-| cylbottomtemp | cylinder bottom temperature (TS2) | int16 | C | false | DEVICE_DATA | 1 | 1 | 1/10 |
-| solarpump | pump (PS1) | boolean |   | false | DEVICE_DATA | 2 | 1 | 1 |
-| pumpworktime | pump working time | time | minutes | false | DEVICE_DATA | 3 | 2 | 1 |
-uint8
-| cylmaxtemp | maximum cylinder temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| collectorshutdown | collector shutdown | boolean |   | false | DEVICE_DATA | 6 | 1 | 1 |
-| cylheated | cyl heated | boolean |   | false | DEVICE_DATA | 7 | 1 | 1 |
-| cylmiddletemp | cylinder middle temperature (TS14) | int16 | C | false | DEVICE_DATA | 17 | 1 | 1/10 |
-| retheatassist | return temperature heat assistance (TS4) | int16 | C | false | DEVICE_DATA | 18 | 1 | 1/10 |
-| heatassistvalve | heat assistance valve (M1) | boolean |   | false | DEVICE_DATA | 19 | 1 | 1 |
-| energylasthour | energy last hour | uint24 | Wh | false | DEVICE_DATA | 13 | 2 | 1/10 |
-
-### SM50
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| collectortemp | collector temperature (TS1) | int16 | C | false | DEVICE_DATA | 0 | 1 | 1/10 |
-| cylbottomtemp | cylinder bottom temperature (TS2) | int16 | C | false | DEVICE_DATA | 1 | 1 | 1/10 |
-| solarpump | pump (PS1) | boolean |   | false | DEVICE_DATA | 2 | 1 | 1 |
-| pumpworktime | pump working time | time | minutes | false | DEVICE_DATA | 3 | 2 | 1 |
-uint8
-| cylmaxtemp | maximum cylinder temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| collectorshutdown | collector shutdown | boolean |   | false | DEVICE_DATA | 6 | 1 | 1 |
-| cylheated | cyl heated | boolean |   | false | DEVICE_DATA | 7 | 1 | 1 |
-| solarpumpmod | pump modulation (PS1) | uint8 | % | false | DEVICE_DATA | 8 | 1 | 1 |
-uint8
-| pumpminmod | minimum pump modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 9 | 1 | 5 |
-uint8
-| turnondiff | pump turn on difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 10 | 1 | 1/10 |
-uint8
-| turnoffdiff | pump turn off difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 11 | 1 | 1/10 |
-| collector2temp | collector 2 temperature (TS7) | int16 | C | false | DEVICE_DATA | 20 | 1 | 1/10 |
-| cylmiddletemp | cylinder middle temperature (TS14) | int16 | C | false | DEVICE_DATA | 17 | 1 | 1/10 |
-| ts3 | cylinder middle temperature (TS3) | int16 | C | false | DEVICE_DATA | 21 | 1 | 1/10 |
-| retheatassist | return temperature heat assistance (TS4) | int16 | C | false | DEVICE_DATA | 18 | 1 | 1/10 |
-| ts8 | (TS8) | int16 | C | false | DEVICE_DATA | 22 | 1 | 1/10 |
-| ts16 | (TS16) | int16 | C | false | DEVICE_DATA | 23 | 1 | 1/10 |
-| heatassistvalve | heat assistance valve (M1) | boolean |   | false | DEVICE_DATA | 19 | 1 | 1 |
-| heatassistpower | heat assistance valve power (M1) | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| solarpump2 | pump 2 (PS4) | boolean |   | false | DEVICE_DATA | 25 | 1 | 1 |
-| solarpump2mod | pump 2 modulation (PS4) | uint8 | % | false | DEVICE_DATA | 26 | 1 | 1 |
-| cyl2bottomtemp | second cylinder bottom temperature (TS5) | int16 | C | false | DEVICE_DATA | 27 | 1 | 1/10 |
-| cyl3bottomtemp | third cylinder bottom temperature (TS11) | int16 | C | false | DEVICE_DATA | 28 | 1 | 1/10 |
-| cyltoptemp | cylinder top temperature (TS10) | int16 | C | false | DEVICE_DATA | 29 | 1 | 1/10 |
-| heatexchangertemp | heat exchanger temperature (TS6) | int16 | C | false | DEVICE_DATA | 30 | 1 | 1/10 |
-| cylpumpmod | cylinder pump modulation (PS5) | uint8 | % | false | DEVICE_DATA | 31 | 1 | 1 |
-| valvestatus | valve status | boolean |   | false | DEVICE_DATA | 32 | 1 | 1 |
-| vs1status | valve status VS1 | boolean |   | false | DEVICE_DATA | 33 | 1 | 1 |
-| vs3status | valve status VS3 | boolean |   | false | DEVICE_DATA | 34 | 1 | 1 |
-| transferpump | transfer pump | boolean |   | false | DEVICE_DATA | 35 | 1 | 1 |
-| transferpumpmod | transfer pump modulation | uint8 | % | false | DEVICE_DATA | 36 | 1 | 1 |
-uint8
-| collectormaxtemp | maximum collector temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 37 | 1 | 1 |
-uint8
-| collectormintemp | minimum collector temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 38 | 1 | 1 |
-| energylasthour | energy last hour | uint24 | Wh | false | DEVICE_DATA | 13 | 2 | 1/10 |
-| energytoday | total energy today | uint24 | Wh | false | DEVICE_DATA | 39 | 2 | 1 |
-| energytotal | total energy | uint24 | kWh | false | DEVICE_DATA | 41 | 2 | 1/10 |
-| pump2worktime | pump 2 working time | time | minutes | false | DEVICE_DATA | 43 | 2 | 1 |
-| m1worktime | differential control working time | time | minutes | false | DEVICE_DATA | 45 | 2 | 1 |
-| heattransfersystem | heattransfer system | boolean |   | true | DEVICE_DATA | 47 | 1 | 1 |
-| externalcyl | external cylinder | boolean |   | true | DEVICE_DATA | 48 | 1 | 1 |
-| thermaldisinfect | thermal disinfection | boolean |   | true | DEVICE_DATA | 49 | 1 | 1 |
-| heatmetering | heatmetering | boolean |   | true | DEVICE_DATA | 50 | 1 | 1 |
-| activated | activated | boolean |   | true | DEVICE_DATA | 51 | 1 | 1 |
-| solarpumpmode | solar pump mode | enum |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| solarpumpkick | solar pump kick | boolean |   | true | DEVICE_DATA | 53 | 1 | 1 |
-| plainwatermode | plain water mode | boolean |   | true | DEVICE_DATA | 54 | 1 | 1 |
-| doublematchflow | doublematchflow | boolean |   | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| pump2minmod | minimum pump 2 modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 56 | 1 | 1 |
-uint8
-| turnondiff2 | pump 2 turn on difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| turnoffdiff2 | pump 2 turn off difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 58 | 1 | 1/10 |
-| pump2kick | pump kick 2 | boolean |   | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| climatezone | climate zone | uint8 (>=0<=0) |   | true | DEVICE_DATA | 60 | 1 | 1 |
-uint16
-| collector1area | collector 1 area | uint16 (>=0<=0) | m² | true | DEVICE_DATA | 61 | 1 | 1/10 |
-| collector1type | collector 1 type | enum |   | true | DEVICE_DATA | 62 | 1 | 1 |
-uint16
-| collector2area | collector 2 area | uint16 (>=0<=0) | m² | true | DEVICE_DATA | 63 | 1 | 1/10 |
-| collector2type | collector 2 type | enum |   | true | DEVICE_DATA | 64 | 1 | 1 |
-| cylpriority | cylinder priority | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| heatcntflowtemp | heat counter flow temperature | uint16 | C | false | DEVICE_DATA | 66 | 1 | 1/10 |
-| heatcntrettemp | heat counter return temperature | uint16 | C | false | DEVICE_DATA | 67 | 1 | 1/10 |
-| heatcnt | heat counter impulses | uint8 |   | false | DEVICE_DATA | 68 | 1 | 1 |
-| swapflowtemp | swap flow temperature (TS14) | uint16 | C | false | DEVICE_DATA | 69 | 1 | 1/10 |
-| swaprettemp | swap return temperature (TS15) | uint16 | C | false | DEVICE_DATA | 70 | 1 | 1/10 |
-int8
-| heatassiston | heat assistance on | int8 (>=0<=0) | K | true | DEVICE_DATA | 71 | 1 | 1/10 |
-int8
-| heatassistoff | heat assistance off | int8 (>=0<=0) | K | true | DEVICE_DATA | 72 | 1 | 1/10 |
-
-### SM100, MS100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| collectortemp | collector temperature (TS1) | int16 | C | false | DEVICE_DATA | 0 | 1 | 1/10 |
-| cylbottomtemp | cylinder bottom temperature (TS2) | int16 | C | false | DEVICE_DATA | 1 | 1 | 1/10 |
-| solarpump | pump (PS1) | boolean |   | false | DEVICE_DATA | 2 | 1 | 1 |
-| pumpworktime | pump working time | time | minutes | false | DEVICE_DATA | 3 | 2 | 1 |
-uint8
-| cylmaxtemp | maximum cylinder temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| collectorshutdown | collector shutdown | boolean |   | false | DEVICE_DATA | 6 | 1 | 1 |
-| cylheated | cyl heated | boolean |   | false | DEVICE_DATA | 7 | 1 | 1 |
-| solarpumpmod | pump modulation (PS1) | uint8 | % | false | DEVICE_DATA | 8 | 1 | 1 |
-uint8
-| pumpminmod | minimum pump modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 9 | 1 | 5 |
-uint8
-| turnondiff | pump turn on difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 10 | 1 | 1/10 |
-uint8
-| turnoffdiff | pump turn off difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 11 | 1 | 1/10 |
-| collector2temp | collector 2 temperature (TS7) | int16 | C | false | DEVICE_DATA | 20 | 1 | 1/10 |
-| cylmiddletemp | cylinder middle temperature (TS14) | int16 | C | false | DEVICE_DATA | 17 | 1 | 1/10 |
-| ts3 | cylinder middle temperature (TS3) | int16 | C | false | DEVICE_DATA | 21 | 1 | 1/10 |
-| retheatassist | return temperature heat assistance (TS4) | int16 | C | false | DEVICE_DATA | 18 | 1 | 1/10 |
-| ts8 | (TS8) | int16 | C | false | DEVICE_DATA | 22 | 1 | 1/10 |
-| ts16 | (TS16) | int16 | C | false | DEVICE_DATA | 23 | 1 | 1/10 |
-| heatassistvalve | heat assistance valve (M1) | boolean |   | false | DEVICE_DATA | 19 | 1 | 1 |
-| heatassistpower | heat assistance valve power (M1) | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| solarpump2 | pump 2 (PS4) | boolean |   | false | DEVICE_DATA | 25 | 1 | 1 |
-| solarpump2mod | pump 2 modulation (PS4) | uint8 | % | false | DEVICE_DATA | 26 | 1 | 1 |
-| cyl2bottomtemp | second cylinder bottom temperature (TS5) | int16 | C | false | DEVICE_DATA | 27 | 1 | 1/10 |
-| cyl3bottomtemp | third cylinder bottom temperature (TS11) | int16 | C | false | DEVICE_DATA | 28 | 1 | 1/10 |
-| cyltoptemp | cylinder top temperature (TS10) | int16 | C | false | DEVICE_DATA | 29 | 1 | 1/10 |
-| heatexchangertemp | heat exchanger temperature (TS6) | int16 | C | false | DEVICE_DATA | 30 | 1 | 1/10 |
-| cylpumpmod | cylinder pump modulation (PS5) | uint8 | % | false | DEVICE_DATA | 31 | 1 | 1 |
-| valvestatus | valve status | boolean |   | false | DEVICE_DATA | 32 | 1 | 1 |
-| vs1status | valve status VS1 | boolean |   | false | DEVICE_DATA | 33 | 1 | 1 |
-| vs3status | valve status VS3 | boolean |   | false | DEVICE_DATA | 34 | 1 | 1 |
-| transferpump | transfer pump | boolean |   | false | DEVICE_DATA | 35 | 1 | 1 |
-| transferpumpmod | transfer pump modulation | uint8 | % | false | DEVICE_DATA | 36 | 1 | 1 |
-uint8
-| collectormaxtemp | maximum collector temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 37 | 1 | 1 |
-uint8
-| collectormintemp | minimum collector temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 38 | 1 | 1 |
-| energylasthour | energy last hour | uint24 | Wh | false | DEVICE_DATA | 13 | 2 | 1/10 |
-| energytoday | total energy today | uint24 | Wh | false | DEVICE_DATA | 39 | 2 | 1 |
-| energytotal | total energy | uint24 | kWh | false | DEVICE_DATA | 41 | 2 | 1/10 |
-| pump2worktime | pump 2 working time | time | minutes | false | DEVICE_DATA | 43 | 2 | 1 |
-| m1worktime | differential control working time | time | minutes | false | DEVICE_DATA | 45 | 2 | 1 |
-| heattransfersystem | heattransfer system | boolean |   | true | DEVICE_DATA | 47 | 1 | 1 |
-| externalcyl | external cylinder | boolean |   | true | DEVICE_DATA | 48 | 1 | 1 |
-| thermaldisinfect | thermal disinfection | boolean |   | true | DEVICE_DATA | 49 | 1 | 1 |
-| heatmetering | heatmetering | boolean |   | true | DEVICE_DATA | 50 | 1 | 1 |
-| activated | activated | boolean |   | true | DEVICE_DATA | 51 | 1 | 1 |
-| solarpumpmode | solar pump mode | enum |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| solarpumpkick | solar pump kick | boolean |   | true | DEVICE_DATA | 53 | 1 | 1 |
-| plainwatermode | plain water mode | boolean |   | true | DEVICE_DATA | 54 | 1 | 1 |
-| doublematchflow | doublematchflow | boolean |   | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| pump2minmod | minimum pump 2 modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 56 | 1 | 1 |
-uint8
-| turnondiff2 | pump 2 turn on difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| turnoffdiff2 | pump 2 turn off difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 58 | 1 | 1/10 |
-| pump2kick | pump kick 2 | boolean |   | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| climatezone | climate zone | uint8 (>=0<=0) |   | true | DEVICE_DATA | 60 | 1 | 1 |
-uint16
-| collector1area | collector 1 area | uint16 (>=0<=0) | m² | true | DEVICE_DATA | 61 | 1 | 1/10 |
-| collector1type | collector 1 type | enum |   | true | DEVICE_DATA | 62 | 1 | 1 |
-uint16
-| collector2area | collector 2 area | uint16 (>=0<=0) | m² | true | DEVICE_DATA | 63 | 1 | 1/10 |
-| collector2type | collector 2 type | enum |   | true | DEVICE_DATA | 64 | 1 | 1 |
-| cylpriority | cylinder priority | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| heatcntflowtemp | heat counter flow temperature | uint16 | C | false | DEVICE_DATA | 66 | 1 | 1/10 |
-| heatcntrettemp | heat counter return temperature | uint16 | C | false | DEVICE_DATA | 67 | 1 | 1/10 |
-| heatcnt | heat counter impulses | uint8 |   | false | DEVICE_DATA | 68 | 1 | 1 |
-| swapflowtemp | swap flow temperature (TS14) | uint16 | C | false | DEVICE_DATA | 69 | 1 | 1/10 |
-| swaprettemp | swap return temperature (TS15) | uint16 | C | false | DEVICE_DATA | 70 | 1 | 1/10 |
-int8
-| heatassiston | heat assistance on | int8 (>=0<=0) | K | true | DEVICE_DATA | 71 | 1 | 1/10 |
-int8
-| heatassistoff | heat assistance off | int8 (>=0<=0) | K | true | DEVICE_DATA | 72 | 1 | 1/10 |
-
-### SM200, MS200
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| collectortemp | collector temperature (TS1) | int16 | C | false | DEVICE_DATA | 0 | 1 | 1/10 |
-| cylbottomtemp | cylinder bottom temperature (TS2) | int16 | C | false | DEVICE_DATA | 1 | 1 | 1/10 |
-| solarpump | pump (PS1) | boolean |   | false | DEVICE_DATA | 2 | 1 | 1 |
-| pumpworktime | pump working time | time | minutes | false | DEVICE_DATA | 3 | 2 | 1 |
-uint8
-| cylmaxtemp | maximum cylinder temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 5 | 1 | 1 |
-| collectorshutdown | collector shutdown | boolean |   | false | DEVICE_DATA | 6 | 1 | 1 |
-| cylheated | cyl heated | boolean |   | false | DEVICE_DATA | 7 | 1 | 1 |
-| solarpumpmod | pump modulation (PS1) | uint8 | % | false | DEVICE_DATA | 8 | 1 | 1 |
-uint8
-| pumpminmod | minimum pump modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 9 | 1 | 5 |
-uint8
-| turnondiff | pump turn on difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 10 | 1 | 1/10 |
-uint8
-| turnoffdiff | pump turn off difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 11 | 1 | 1/10 |
-| collector2temp | collector 2 temperature (TS7) | int16 | C | false | DEVICE_DATA | 20 | 1 | 1/10 |
-| cylmiddletemp | cylinder middle temperature (TS14) | int16 | C | false | DEVICE_DATA | 17 | 1 | 1/10 |
-| ts3 | cylinder middle temperature (TS3) | int16 | C | false | DEVICE_DATA | 21 | 1 | 1/10 |
-| retheatassist | return temperature heat assistance (TS4) | int16 | C | false | DEVICE_DATA | 18 | 1 | 1/10 |
-| ts8 | (TS8) | int16 | C | false | DEVICE_DATA | 22 | 1 | 1/10 |
-| ts16 | (TS16) | int16 | C | false | DEVICE_DATA | 23 | 1 | 1/10 |
-| heatassistvalve | heat assistance valve (M1) | boolean |   | false | DEVICE_DATA | 19 | 1 | 1 |
-| heatassistpower | heat assistance valve power (M1) | uint8 | % | false | DEVICE_DATA | 24 | 1 | 1 |
-| solarpump2 | pump 2 (PS4) | boolean |   | false | DEVICE_DATA | 25 | 1 | 1 |
-| solarpump2mod | pump 2 modulation (PS4) | uint8 | % | false | DEVICE_DATA | 26 | 1 | 1 |
-| cyl2bottomtemp | second cylinder bottom temperature (TS5) | int16 | C | false | DEVICE_DATA | 27 | 1 | 1/10 |
-| cyl3bottomtemp | third cylinder bottom temperature (TS11) | int16 | C | false | DEVICE_DATA | 28 | 1 | 1/10 |
-| cyltoptemp | cylinder top temperature (TS10) | int16 | C | false | DEVICE_DATA | 29 | 1 | 1/10 |
-| heatexchangertemp | heat exchanger temperature (TS6) | int16 | C | false | DEVICE_DATA | 30 | 1 | 1/10 |
-| cylpumpmod | cylinder pump modulation (PS5) | uint8 | % | false | DEVICE_DATA | 31 | 1 | 1 |
-| valvestatus | valve status | boolean |   | false | DEVICE_DATA | 32 | 1 | 1 |
-| vs1status | valve status VS1 | boolean |   | false | DEVICE_DATA | 33 | 1 | 1 |
-| vs3status | valve status VS3 | boolean |   | false | DEVICE_DATA | 34 | 1 | 1 |
-| transferpump | transfer pump | boolean |   | false | DEVICE_DATA | 35 | 1 | 1 |
-| transferpumpmod | transfer pump modulation | uint8 | % | false | DEVICE_DATA | 36 | 1 | 1 |
-uint8
-| collectormaxtemp | maximum collector temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 37 | 1 | 1 |
-uint8
-| collectormintemp | minimum collector temperature | uint8 (>=0<=0) | C | true | DEVICE_DATA | 38 | 1 | 1 |
-| energylasthour | energy last hour | uint24 | Wh | false | DEVICE_DATA | 13 | 2 | 1/10 |
-| energytoday | total energy today | uint24 | Wh | false | DEVICE_DATA | 39 | 2 | 1 |
-| energytotal | total energy | uint24 | kWh | false | DEVICE_DATA | 41 | 2 | 1/10 |
-| pump2worktime | pump 2 working time | time | minutes | false | DEVICE_DATA | 43 | 2 | 1 |
-| m1worktime | differential control working time | time | minutes | false | DEVICE_DATA | 45 | 2 | 1 |
-| heattransfersystem | heattransfer system | boolean |   | true | DEVICE_DATA | 47 | 1 | 1 |
-| externalcyl | external cylinder | boolean |   | true | DEVICE_DATA | 48 | 1 | 1 |
-| thermaldisinfect | thermal disinfection | boolean |   | true | DEVICE_DATA | 49 | 1 | 1 |
-| heatmetering | heatmetering | boolean |   | true | DEVICE_DATA | 50 | 1 | 1 |
-| activated | activated | boolean |   | true | DEVICE_DATA | 51 | 1 | 1 |
-| solarpumpmode | solar pump mode | enum |   | true | DEVICE_DATA | 52 | 1 | 1 |
-| solarpumpkick | solar pump kick | boolean |   | true | DEVICE_DATA | 53 | 1 | 1 |
-| plainwatermode | plain water mode | boolean |   | true | DEVICE_DATA | 54 | 1 | 1 |
-| doublematchflow | doublematchflow | boolean |   | true | DEVICE_DATA | 55 | 1 | 1 |
-uint8
-| pump2minmod | minimum pump 2 modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 56 | 1 | 1 |
-uint8
-| turnondiff2 | pump 2 turn on difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 57 | 1 | 1/10 |
-uint8
-| turnoffdiff2 | pump 2 turn off difference | uint8 (>=0<=0) | C | true | DEVICE_DATA | 58 | 1 | 1/10 |
-| pump2kick | pump kick 2 | boolean |   | true | DEVICE_DATA | 59 | 1 | 1 |
-uint8
-| climatezone | climate zone | uint8 (>=0<=0) |   | true | DEVICE_DATA | 60 | 1 | 1 |
-uint16
-| collector1area | collector 1 area | uint16 (>=0<=0) | m² | true | DEVICE_DATA | 61 | 1 | 1/10 |
-| collector1type | collector 1 type | enum |   | true | DEVICE_DATA | 62 | 1 | 1 |
-uint16
-| collector2area | collector 2 area | uint16 (>=0<=0) | m² | true | DEVICE_DATA | 63 | 1 | 1/10 |
-| collector2type | collector 2 type | enum |   | true | DEVICE_DATA | 64 | 1 | 1 |
-| cylpriority | cylinder priority | enum |   | true | DEVICE_DATA | 65 | 1 | 1 |
-| heatcntflowtemp | heat counter flow temperature | uint16 | C | false | DEVICE_DATA | 66 | 1 | 1/10 |
-| heatcntrettemp | heat counter return temperature | uint16 | C | false | DEVICE_DATA | 67 | 1 | 1/10 |
-| heatcnt | heat counter impulses | uint8 |   | false | DEVICE_DATA | 68 | 1 | 1 |
-| swapflowtemp | swap flow temperature (TS14) | uint16 | C | false | DEVICE_DATA | 69 | 1 | 1/10 |
-| swaprettemp | swap return temperature (TS15) | uint16 | C | false | DEVICE_DATA | 70 | 1 | 1/10 |
-int8
-| heatassiston | heat assistance on | int8 (>=0<=0) | K | true | DEVICE_DATA | 71 | 1 | 1/10 |
-int8
-| heatassistoff | heat assistance off | int8 (>=0<=0) | K | true | DEVICE_DATA | 72 | 1 | 1/10 |
-
-## Devices of type \_heatpump
-
-### HP Module
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| airhumidity | relative air humidity | uint8 | % | false | DEVICE_DATA | 0 | 1 | 1 |
-| dewtemperature | dew point temperature | uint8 | C | false | DEVICE_DATA | 1 | 1 | 1 |
-| curflowtemp | current flow temperature | int16 | C | false | DEVICE_DATA | 2 | 1 | 1/10 |
-| rettemp | return temperature | int16 | C | false | DEVICE_DATA | 3 | 1 | 1/10 |
-| sysrettemp | system return temperature | int16 | C | false | DEVICE_DATA | 4 | 1 | 1/10 |
-| hpta4 | drain pan temp (TA4) | int16 | C | false | DEVICE_DATA | 5 | 1 | 1/10 |
-| hptr1 | compressor temperature (TR1) | int16 | C | false | DEVICE_DATA | 6 | 1 | 1/10 |
-| hptr3 | refrigerant temperature liquid side (condenser output) (TR3) | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| hptr4 | evaporator inlet temperature (TR4) | int16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| hptr5 | compressor inlet temperature (TR5) | int16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| hptr6 | compressor outlet temperature (TR6) | int16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| hptl2 | air inlet temperature (TL2) | int16 | C | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| hppl1 | low pressure side temperature (PL1) | int16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| hpph1 | high pressure side temperature (PH1) | int16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 14 | 1 | 1 |
-| hpcompspd | compressor speed | uint8 | % | false | DEVICE_DATA | 15 | 1 | 1 |
-| hpactivity | compressor activity | enum |   | false | DEVICE_DATA | 16 | 1 | 1 |
-| hppower | compressor power output | uint16 | W | false | DEVICE_DATA | 17 | 1 | 1 |
-| hpcurrpower | compressor current power | uint16 | W | false | DEVICE_DATA | 18 | 1 | 1 |
-| hppumpflow | volume flow | uint16 | l/h | false | DEVICE_DATA | 19 | 1 | 10 |
-| hpcompspder1 | compressor speed ER1 | uint8 | % | false | DEVICE_DATA | 20 | 1 | 1 |
-| hpSpeedSetpoint | speed setpoint | uint8 | % | false | DEVICE_DATA | 21 | 1 | 1 |
-| smartgridmode | smart grid mode | uint8 |   | false | DEVICE_DATA | 22 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 23 | 1 | 1 |
-| lownoisemode | low noise mode | enum |   | true | DEVICE_DATA | 24 | 1 | 1 |
-uint8
-| lownoisestart | low noise starttime | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 25 | 1 | 1 |
-uint8
-| lownoisestop | low noise stoptime | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 26 | 1 | 1 |
-| dhw.hybriddhw | hybrid DHW | enum |   | true | DHW | 0 | 1 | 1 |
-uint8
-| energypricegas | energy price gas | uint8 (>=0<=0) | ct/kWh | true | DEVICE_DATA | 27 | 1 | 1 |
-uint8
-| energypriceel | energy price electric | uint8 (>=0<=0) | ct/kWh | true | DEVICE_DATA | 28 | 1 | 1 |
-uint8
-| energyfeedpv | feed in PV | uint8 (>=0<=0) | ct/kWh | true | DEVICE_DATA | 29 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 30 | 1 | 1 |
-| airpurgemode | air purge mode | boolean |   | true | DEVICE_DATA | 31 | 1 | 1 |
-uint8
-| heatpumpoutput | heatpump output | uint8 (>=0<=0) | % | true | DEVICE_DATA | 32 | 1 | 1 |
-| coolingcircuit | cooling circuit | boolean |   | true | DEVICE_DATA | 33 | 1 | 1 |
-uint8
-| compstartmod | compressor start modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 34 | 1 | 1 |
-| heatdrainpan | heat drain pan | boolean |   | true | DEVICE_DATA | 35 | 1 | 1 |
-| heatcable | heating cable | boolean |   | true | DEVICE_DATA | 36 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 37 | 2 | 1/100 |
-| dhw.nrg | energy | uint24 | kWh | false | DHW | 1 | 2 | 1/100 |
-| nrgheat | energy heating | uint24 | kWh | false | DEVICE_DATA | 39 | 2 | 1/100 |
-| metertotal | meter total | uint24 | kWh | false | DEVICE_DATA | 41 | 2 | 1/100 |
-| metercomp | meter compressor | uint24 | kWh | false | DEVICE_DATA | 43 | 2 | 1/100 |
-| metereheat | meter e-heater | uint24 | kWh | false | DEVICE_DATA | 45 | 2 | 1/100 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 47 | 2 | 1/100 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 3 | 2 | 1/100 |
-| heatingstarts | heating control starts | uint24 |   | false | DEVICE_DATA | 49 | 2 | 1 |
-| dhw.startshp | starts hp | uint24 |   | false | DHW | 5 | 2 | 1 |
-| fuelheat | fuel consumption heating | uint32 | kWh | false | DEVICE_DATA | 51 | 2 | 1/10 |
-| dhw.fueldhw | fuel consumption | uint32 | kWh | false | DHW | 7 | 2 | 1/10 |
-| elheat | el. consumption heating | uint32 | kWh | false | DEVICE_DATA | 53 | 2 | 1/10 |
-| dhw.eldhw | el. consumption | uint32 | kWh | false | DHW | 9 | 2 | 1/10 |
-| elgenheat | el. generation heating | uint32 | kWh | false | DEVICE_DATA | 55 | 2 | 1/10 |
-| dhw.elgendhw | el generation | uint32 | kWh | false | DHW | 11 | 2 | 1/10 |
-
-### Hybrid Manager HM200
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| airhumidity | relative air humidity | uint8 | % | false | DEVICE_DATA | 0 | 1 | 1 |
-| dewtemperature | dew point temperature | uint8 | C | false | DEVICE_DATA | 1 | 1 | 1 |
-| curflowtemp | current flow temperature | int16 | C | false | DEVICE_DATA | 2 | 1 | 1/10 |
-| rettemp | return temperature | int16 | C | false | DEVICE_DATA | 3 | 1 | 1/10 |
-| sysrettemp | system return temperature | int16 | C | false | DEVICE_DATA | 4 | 1 | 1/10 |
-| hpta4 | drain pan temp (TA4) | int16 | C | false | DEVICE_DATA | 5 | 1 | 1/10 |
-| hptr1 | compressor temperature (TR1) | int16 | C | false | DEVICE_DATA | 6 | 1 | 1/10 |
-| hptr3 | refrigerant temperature liquid side (condenser output) (TR3) | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| hptr4 | evaporator inlet temperature (TR4) | int16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| hptr5 | compressor inlet temperature (TR5) | int16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| hptr6 | compressor outlet temperature (TR6) | int16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| hptl2 | air inlet temperature (TL2) | int16 | C | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| hppl1 | low pressure side temperature (PL1) | int16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| hpph1 | high pressure side temperature (PH1) | int16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 14 | 1 | 1 |
-| hpcompspd | compressor speed | uint8 | % | false | DEVICE_DATA | 15 | 1 | 1 |
-| hpactivity | compressor activity | enum |   | false | DEVICE_DATA | 16 | 1 | 1 |
-| hppower | compressor power output | uint16 | W | false | DEVICE_DATA | 17 | 1 | 1 |
-| hpcurrpower | compressor current power | uint16 | W | false | DEVICE_DATA | 18 | 1 | 1 |
-| hppumpflow | volume flow | uint16 | l/h | false | DEVICE_DATA | 19 | 1 | 10 |
-| hpcompspder1 | compressor speed ER1 | uint8 | % | false | DEVICE_DATA | 20 | 1 | 1 |
-| hpSpeedSetpoint | speed setpoint | uint8 | % | false | DEVICE_DATA | 21 | 1 | 1 |
-| smartgridmode | smart grid mode | uint8 |   | false | DEVICE_DATA | 22 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 23 | 1 | 1 |
-| lownoisemode | low noise mode | enum |   | true | DEVICE_DATA | 24 | 1 | 1 |
-uint8
-| lownoisestart | low noise starttime | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 25 | 1 | 1 |
-uint8
-| lownoisestop | low noise stoptime | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 26 | 1 | 1 |
-| dhw.hybriddhw | hybrid DHW | enum |   | true | DHW | 0 | 1 | 1 |
-uint8
-| energypricegas | energy price gas | uint8 (>=0<=0) | ct/kWh | true | DEVICE_DATA | 27 | 1 | 1 |
-uint8
-| energypriceel | energy price electric | uint8 (>=0<=0) | ct/kWh | true | DEVICE_DATA | 28 | 1 | 1 |
-uint8
-| energyfeedpv | feed in PV | uint8 (>=0<=0) | ct/kWh | true | DEVICE_DATA | 29 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 30 | 1 | 1 |
-| airpurgemode | air purge mode | boolean |   | true | DEVICE_DATA | 31 | 1 | 1 |
-uint8
-| heatpumpoutput | heatpump output | uint8 (>=0<=0) | % | true | DEVICE_DATA | 32 | 1 | 1 |
-| coolingcircuit | cooling circuit | boolean |   | true | DEVICE_DATA | 33 | 1 | 1 |
-uint8
-| compstartmod | compressor start modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 34 | 1 | 1 |
-| heatdrainpan | heat drain pan | boolean |   | true | DEVICE_DATA | 35 | 1 | 1 |
-| heatcable | heating cable | boolean |   | true | DEVICE_DATA | 36 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 37 | 2 | 1/100 |
-| dhw.nrg | energy | uint24 | kWh | false | DHW | 1 | 2 | 1/100 |
-| nrgheat | energy heating | uint24 | kWh | false | DEVICE_DATA | 39 | 2 | 1/100 |
-| metertotal | meter total | uint24 | kWh | false | DEVICE_DATA | 41 | 2 | 1/100 |
-| metercomp | meter compressor | uint24 | kWh | false | DEVICE_DATA | 43 | 2 | 1/100 |
-| metereheat | meter e-heater | uint24 | kWh | false | DEVICE_DATA | 45 | 2 | 1/100 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 47 | 2 | 1/100 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 3 | 2 | 1/100 |
-| heatingstarts | heating control starts | uint24 |   | false | DEVICE_DATA | 49 | 2 | 1 |
-| dhw.startshp | starts hp | uint24 |   | false | DHW | 5 | 2 | 1 |
-| fuelheat | fuel consumption heating | uint32 | kWh | false | DEVICE_DATA | 51 | 2 | 1/10 |
-| dhw.fueldhw | fuel consumption | uint32 | kWh | false | DHW | 7 | 2 | 1/10 |
-| elheat | el. consumption heating | uint32 | kWh | false | DEVICE_DATA | 53 | 2 | 1/10 |
-| dhw.eldhw | el. consumption | uint32 | kWh | false | DHW | 9 | 2 | 1/10 |
-| elgenheat | el. generation heating | uint32 | kWh | false | DEVICE_DATA | 55 | 2 | 1/10 |
-| dhw.elgendhw | el generation | uint32 | kWh | false | DHW | 11 | 2 | 1/10 |
-
-### CSH5800iG
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| airhumidity | relative air humidity | uint8 | % | false | DEVICE_DATA | 0 | 1 | 1 |
-| dewtemperature | dew point temperature | uint8 | C | false | DEVICE_DATA | 1 | 1 | 1 |
-| curflowtemp | current flow temperature | int16 | C | false | DEVICE_DATA | 2 | 1 | 1/10 |
-| rettemp | return temperature | int16 | C | false | DEVICE_DATA | 3 | 1 | 1/10 |
-| sysrettemp | system return temperature | int16 | C | false | DEVICE_DATA | 4 | 1 | 1/10 |
-| hpta4 | drain pan temp (TA4) | int16 | C | false | DEVICE_DATA | 5 | 1 | 1/10 |
-| hptr1 | compressor temperature (TR1) | int16 | C | false | DEVICE_DATA | 6 | 1 | 1/10 |
-| hptr3 | refrigerant temperature liquid side (condenser output) (TR3) | int16 | C | false | DEVICE_DATA | 7 | 1 | 1/10 |
-| hptr4 | evaporator inlet temperature (TR4) | int16 | C | false | DEVICE_DATA | 8 | 1 | 1/10 |
-| hptr5 | compressor inlet temperature (TR5) | int16 | C | false | DEVICE_DATA | 9 | 1 | 1/10 |
-| hptr6 | compressor outlet temperature (TR6) | int16 | C | false | DEVICE_DATA | 10 | 1 | 1/10 |
-| hptl2 | air inlet temperature (TL2) | int16 | C | false | DEVICE_DATA | 11 | 1 | 1/10 |
-| hppl1 | low pressure side temperature (PL1) | int16 | C | false | DEVICE_DATA | 12 | 1 | 1/10 |
-| hpph1 | high pressure side temperature (PH1) | int16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| heatingpumpmod | heating pump modulation | uint8 | % | false | DEVICE_DATA | 14 | 1 | 1 |
-| hpcompspd | compressor speed | uint8 | % | false | DEVICE_DATA | 15 | 1 | 1 |
-| hpactivity | compressor activity | enum |   | false | DEVICE_DATA | 16 | 1 | 1 |
-| hppower | compressor power output | uint16 | W | false | DEVICE_DATA | 17 | 1 | 1 |
-| hpcurrpower | compressor current power | uint16 | W | false | DEVICE_DATA | 18 | 1 | 1 |
-| hppumpflow | volume flow | uint16 | l/h | false | DEVICE_DATA | 19 | 1 | 10 |
-| hpcompspder1 | compressor speed ER1 | uint8 | % | false | DEVICE_DATA | 20 | 1 | 1 |
-| hpSpeedSetpoint | speed setpoint | uint8 | % | false | DEVICE_DATA | 21 | 1 | 1 |
-| smartgridmode | smart grid mode | uint8 |   | false | DEVICE_DATA | 22 | 1 | 1 |
-| hybridstrategy | hybrid control strategy | enum |   | true | DEVICE_DATA | 23 | 1 | 1 |
-| lownoisemode | low noise mode | enum |   | true | DEVICE_DATA | 24 | 1 | 1 |
-uint8
-| lownoisestart | low noise starttime | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 25 | 1 | 1 |
-uint8
-| lownoisestop | low noise stoptime | uint8 (>=0<=23) | hours | true | DEVICE_DATA | 26 | 1 | 1 |
-| dhw.hybriddhw | hybrid DHW | enum |   | true | DHW | 0 | 1 | 1 |
-uint8
-| energypricegas | energy price gas | uint8 (>=0<=0) | ct/kWh | true | DEVICE_DATA | 27 | 1 | 1 |
-uint8
-| energypriceel | energy price electric | uint8 (>=0<=0) | ct/kWh | true | DEVICE_DATA | 28 | 1 | 1 |
-uint8
-| energyfeedpv | feed in PV | uint8 (>=0<=0) | ct/kWh | true | DEVICE_DATA | 29 | 1 | 1 |
-int8
-| switchovertemp | outside switchover temperature | int8 (>=0<=0) | C | true | DEVICE_DATA | 30 | 1 | 1 |
-| airpurgemode | air purge mode | boolean |   | true | DEVICE_DATA | 31 | 1 | 1 |
-uint8
-| heatpumpoutput | heatpump output | uint8 (>=0<=0) | % | true | DEVICE_DATA | 32 | 1 | 1 |
-| coolingcircuit | cooling circuit | boolean |   | true | DEVICE_DATA | 33 | 1 | 1 |
-uint8
-| compstartmod | compressor start modulation | uint8 (>=0<=0) | % | true | DEVICE_DATA | 34 | 1 | 1 |
-| heatdrainpan | heat drain pan | boolean |   | true | DEVICE_DATA | 35 | 1 | 1 |
-| heatcable | heating cable | boolean |   | true | DEVICE_DATA | 36 | 1 | 1 |
-| nrgtotal | total energy | uint24 | kWh | false | DEVICE_DATA | 37 | 2 | 1/100 |
-| dhw.nrg | energy | uint24 | kWh | false | DHW | 1 | 2 | 1/100 |
-| nrgheat | energy heating | uint24 | kWh | false | DEVICE_DATA | 39 | 2 | 1/100 |
-| metertotal | meter total | uint24 | kWh | false | DEVICE_DATA | 41 | 2 | 1/100 |
-| metercomp | meter compressor | uint24 | kWh | false | DEVICE_DATA | 43 | 2 | 1/100 |
-| metereheat | meter e-heater | uint24 | kWh | false | DEVICE_DATA | 45 | 2 | 1/100 |
-| meterheat | meter heating | uint24 | kWh | false | DEVICE_DATA | 47 | 2 | 1/100 |
-| dhw.meter | meter | uint24 | kWh | false | DHW | 3 | 2 | 1/100 |
-| heatingstarts | heating control starts | uint24 |   | false | DEVICE_DATA | 49 | 2 | 1 |
-| dhw.startshp | starts hp | uint24 |   | false | DHW | 5 | 2 | 1 |
-| fuelheat | fuel consumption heating | uint32 | kWh | false | DEVICE_DATA | 51 | 2 | 1/10 |
-| dhw.fueldhw | fuel consumption | uint32 | kWh | false | DHW | 7 | 2 | 1/10 |
-| elheat | el. consumption heating | uint32 | kWh | false | DEVICE_DATA | 53 | 2 | 1/10 |
-| dhw.eldhw | el. consumption | uint32 | kWh | false | DHW | 9 | 2 | 1/10 |
-| elgenheat | el. generation heating | uint32 | kWh | false | DEVICE_DATA | 55 | 2 | 1/10 |
-| dhw.elgendhw | el generation | uint32 | kWh | false | DHW | 11 | 2 | 1/10 |
-
-## Devices of type \_switch
-
-### WM10
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| activated | activated | boolean |   | false | DEVICE_DATA | 0 | 1 | 1 |
-| flowtemphc | flow temperature (TC1) | uint16 | C | false | DEVICE_DATA | 1 | 1 | 1/10 |
-| status | status | int8 |   | false | DEVICE_DATA | 2 | 1 | 1 |
-
-## Devices of type \_controller
-
-### Rego 3000
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| datetime | date/time | string |   | false | DEVICE_DATA | 0 | 13 | 1 |
-
-## Devices of type \_connect
-
-### MX400
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| datetime | date/time | string |   | false | DEVICE_DATA | 0 | 13 | 1 |
-| outdoortemp | outside temperature | int16 | C | false | DEVICE_DATA | 13 | 1 | 1/10 |
-| src1.currtemp | current room temperature | int16 | C | false | SRC | 0 | 1 | 1/10 |
-| src1.airhumidity | relative air humidity | uint8 | % | false | SRC | 1 | 1 | 1 |
-| src1.dewtemperature | dew point temperature | int16 | C | false | SRC | 2 | 1 | 1/10 |
-uint8
-| src1.seltemp | selected room temperature | uint8 (>=5<=30) | C | true | SRC | 3 | 1 | 1/2 |
-| src1.mode | operating mode | enum |   | true | SRC | 4 | 1 | 1 |
-| src1.name | name | string |   | true | SRC | 5 | 26 | 1 |
-| src1.childlock | child lock | boolean |   | true | SRC | 31 | 1 | 1 |
-| src1.icon | icon | enum |   | true | SRC | 32 | 1 | 1 |
-
-## Devices of type \_alert
-
-### EM10
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| setflowtemp | set flow temperature | uint8 | C | false | DEVICE_DATA | 0 | 1 | 1 |
-| setburnpow | burner set power | uint8 | % | false | DEVICE_DATA | 1 | 1 | 1 |
-
-## Devices of type \_extension
-
-### EM10, EM100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| flowtempvf | flow temperature in header (T0/Vf) | int16 | C | false | DEVICE_DATA | 0 | 1 | 1/10 |
-| input | input | uint8 | V | false | DEVICE_DATA | 1 | 1 | 1/10 |
-| outpow | output IO1 | uint8 | % | false | DEVICE_DATA | 2 | 1 | 1 |
-| setpower | request power | uint8 | % | false | DEVICE_DATA | 3 | 1 | 1 |
-| setpoint | set temp. | uint8 | C | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| minv | min volt. | uint8 (>=0<=0) | V | true | DEVICE_DATA | 5 | 1 | 1/10 |
-uint8
-| maxv | max volt. | uint8 (>=0<=0) | V | true | DEVICE_DATA | 6 | 1 | 1/10 |
-uint8
-| mint | min temp. | uint8 (>=0<=0) | C | true | DEVICE_DATA | 7 | 1 | 1 |
-uint8
-| maxt | max temp. | uint8 (>=0<=0) | C | true | DEVICE_DATA | 8 | 1 | 1 |
-| mode | operating mode | uint8 |   | false | DEVICE_DATA | 9 | 1 | 1 |
-
-### T1RF
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| flowtempvf | flow temperature in header (T0/Vf) | int16 | C | false | DEVICE_DATA | 0 | 1 | 1/10 |
-| input | input | uint8 | V | false | DEVICE_DATA | 1 | 1 | 1/10 |
-| outpow | output IO1 | uint8 | % | false | DEVICE_DATA | 2 | 1 | 1 |
-| setpower | request power | uint8 | % | false | DEVICE_DATA | 3 | 1 | 1 |
-| setpoint | set temp. | uint8 | C | false | DEVICE_DATA | 4 | 1 | 1 |
-uint8
-| minv | min volt. | uint8 (>=0<=0) | V | true | DEVICE_DATA | 5 | 1 | 1/10 |
-uint8
-| maxv | max volt. | uint8 (>=0<=0) | V | true | DEVICE_DATA | 6 | 1 | 1/10 |
-uint8
-| mint | min temp. | uint8 (>=0<=0) | C | true | DEVICE_DATA | 7 | 1 | 1 |
-uint8
-| maxt | max temp. | uint8 (>=0<=0) | C | true | DEVICE_DATA | 8 | 1 | 1 |
-| mode | operating mode | uint8 |   | false | DEVICE_DATA | 9 | 1 | 1 |
-
-## Devices of type \_heatsource
-
-### AM200
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| ahs1.sysflowtemp | system flow temperature | int16 | C | false | AHS | 0 | 1 | 1/10 |
-| ahs1.sysrettemp | system return temperature | int16 | C | false | AHS | 1 | 1 | 1/10 |
-| ahs1.altflowtemp | alternative hs flow temperature | int16 | C | false | AHS | 2 | 1 | 1/10 |
-| ahs1.altrettemp | alternative hs return temperature | int16 | C | false | AHS | 3 | 1 | 1/10 |
-| ahs1.cyltoptemp | cylinder top temperature | int16 | C | false | AHS | 4 | 1 | 1/10 |
-| ahs1.cylcentertemp | cylinder center temperature | int16 | C | false | AHS | 5 | 1 | 1/10 |
-| ahs1.cylbottomtemp | cylinder bottom temperature | int16 | C | false | AHS | 6 | 1 | 1/10 |
-| ahs1.fluegastemp | flue gas temperature | int16 | C | false | AHS | 7 | 1 | 1/10 |
-| ahs1.valvebuffer | buffer valve | uint8 | % | false | AHS | 8 | 1 | 1 |
-| ahs1.valvereturn | return valve | uint8 | % | false | AHS | 9 | 1 | 1 |
-| ahs1.apumpmod | alternative hs pump modulation | uint8 | % | false | AHS | 10 | 1 | 1 |
-| ahs1.vr2config | vr2 configuration | enum |   | true | AHS | 11 | 1 | 1 |
-| ahs1.ahsactivated | alternate heat source activation | boolean |   | true | AHS | 12 | 1 | 1 |
-| ahs1.apumpconfig | primary pump config | boolean |   | true | AHS | 13 | 1 | 1 |
-| ahs1.apumpsignal | output for pr1 pump | enum |   | true | AHS | 14 | 1 | 1 |
-uint8
-| ahs1.apumpmin | min output pump pr1 | uint8 (>=12<=50) | % | true | AHS | 15 | 1 | 1 |
-| ahs1.temprise | ahs return temp rise | boolean |   | true | AHS | 16 | 1 | 1 |
-uint8
-| ahs1.setreturntemp | set temp return | uint8 (>=40<=75) | C | true | AHS | 17 | 1 | 1 |
-uint16
-| ahs1.mixruntime | mixer run time | uint16 (>=0<=600) | seconds | true | AHS | 18 | 1 | 1 |
-uint8
-| ahs1.setflowtemp | set flow temperature | uint8 (>=40<=75) | C | true | AHS | 19 | 1 | 1 |
-| ahs1.bufbypass | buffer bypass config | enum |   | true | AHS | 20 | 1 | 1 |
-uint16
-| ahs1.bufmixruntime | bypass mixer run time | uint16 (>=0<=600) | seconds | true | AHS | 21 | 1 | 1 |
-| ahs1.bufconfig | dhw buffer config | enum |   | true | AHS | 22 | 1 | 1 |
-| ahs1.blockmode | config htg. blocking mode | enum |   | true | AHS | 23 | 1 | 1 |
-| ahs1.blockterm | config of block terminal | enum |   | true | AHS | 24 | 1 | 1 |
-int8
-| ahs1.blockhyst | hyst. for boiler block | int8 (>=0<=50) | C | true | AHS | 25 | 1 | 1 |
-uint8
-| ahs1.releasewait | boiler release wait time | uint8 (>=0<=240) | minutes | true | AHS | 26 | 1 | 1 |
-| ahs1.burner | burner | boolean |   | false | AHS | 27 | 1 | 1 |
-| ahs1.apump | alternative hs pump | boolean |   | false | AHS | 28 | 1 | 1 |
-| ahs1.heatrequest | heat request | uint8 | % | false | AHS | 29 | 1 | 1 |
-| ahs1.blockremain | remaining blocktime | uint8 | minutes | false | AHS | 30 | 1 | 1 |
-| ahs1.blockremaindhw | remaining blocktime dhw | uint8 | minutes | false | AHS | 31 | 1 | 1 |
-
-## Devices of type \_ventilation
-
-### HRV176, HRV156, 5000c, MV200
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| outfresh | outdoor fresh air | int16 | C | false | DEVICE_DATA | 0 | 1 | 1/10 |
-| infresh | indoor fresh air | int16 | C | false | DEVICE_DATA | 1 | 1 | 1/10 |
-| outexhaust | outdoor exhaust air | int16 | C | false | DEVICE_DATA | 2 | 1 | 1/10 |
-| inexhaust | indoor exhaust air | int16 | C | false | DEVICE_DATA | 3 | 1 | 1/10 |
-| ventinspeed | in blower speed | uint8 | % | false | DEVICE_DATA | 4 | 1 | 1 |
-| ventoutspeed | out blower speed | uint8 | % | false | DEVICE_DATA | 5 | 1 | 1 |
-| ventmode | ventilation mode | enum |   | true | DEVICE_DATA | 6 | 1 | 1 |
-| airquality | air quality (voc) | uint16 |   | false | DEVICE_DATA | 7 | 1 | 1 |
-| airhumidity | relative air humidity | uint8 | % | false | DEVICE_DATA | 8 | 1 | 1 |
-| bypass | bypass | boolean |   | true | DEVICE_DATA | 9 | 1 | 1 |
-
-## Devices of type \_water
-
-### IPM
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 0 | 1 | 1 |
-| dhw.temp | current temperature | uint16 | C | false | DHW | 1 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 2 | 1 | 1/10 |
-| dhw.hydrTemp | hydraulic header temperature | uint16 | C | false | DHW | 3 | 1 | 1/10 |
-| dhw.pump | pump | boolean |   | false | DHW | 4 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=0) | C | true | DHW | 5 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 6 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 7 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=0<=0) | C | true | DHW | 8 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 9 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 10 | 1 | 1 |
-
-### IPM2
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-uint8
-| dhw.seltemp | selected temperature | uint8 (>=0<=0) | C | true | DHW | 0 | 1 | 1 |
-| dhw.temp | current temperature | uint16 | C | false | DHW | 1 | 1 | 1/10 |
-| dhw.curtemp2 | current extern temperature | uint16 | C | false | DHW | 2 | 1 | 1/10 |
-| dhw.hydrTemp | hydraulic header temperature | uint16 | C | false | DHW | 3 | 1 | 1/10 |
-| dhw.pump | pump | boolean |   | false | DHW | 4 | 1 | 1 |
-uint8
-| dhw.flowtempoffset | flow temperature offset | uint8 (>=0<=0) | C | true | DHW | 5 | 1 | 1 |
-int8
-| dhw.hyston | hysteresis on temperature | int8 (>=0<=0) | C | true | DHW | 6 | 1 | 1 |
-int8
-| dhw.hystoff | hysteresis off temperature | int8 (>=0<=0) | C | true | DHW | 7 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=0<=0) | C | true | DHW | 8 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 9 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 10 | 1 | 1 |
-
-### MM100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| dhw.temp | current temperature | uint16 | C | false | DHW | 1 | 1 | 1/10 |
-| dhw.tempstatus | temperature switch in assigned dhw (MC1) | int8 |   | false | DHW | 11 | 1 | 1 |
-| dhw.pump | pump | boolean |   | false | DHW | 4 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=0) | C | true | DHW | 12 | 1 | 1 |
-int8
-| dhw.difftemp | start differential temperature | int8 (>=0<=0) | C | true | DHW | 13 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=0<=0) | C | true | DHW | 8 | 1 | 1 |
-uint8
-| dhw.redtemp | reduced temperature | uint8 (>=0<=0) | C | true | DHW | 14 | 1 | 1 |
-uint8
-| dhw.requiredtemp | required temperature | uint8 (>=0<=0) | C | true | DHW | 15 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 9 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 10 | 1 | 1 |
-
-### MM200
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| dhw.temp | current temperature | uint16 | C | false | DHW | 1 | 1 | 1/10 |
-| dhw.tempstatus | temperature switch in assigned dhw (MC1) | int8 |   | false | DHW | 11 | 1 | 1 |
-| dhw.pump | pump | boolean |   | false | DHW | 4 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=0) | C | true | DHW | 12 | 1 | 1 |
-int8
-| dhw.difftemp | start differential temperature | int8 (>=0<=0) | C | true | DHW | 13 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=0<=0) | C | true | DHW | 8 | 1 | 1 |
-uint8
-| dhw.redtemp | reduced temperature | uint8 (>=0<=0) | C | true | DHW | 14 | 1 | 1 |
-uint8
-| dhw.requiredtemp | required temperature | uint8 (>=0<=0) | C | true | DHW | 15 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 9 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 10 | 1 | 1 |
-
-### SM100, MS100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| dhw.temp | current temperature | uint16 | C | false | DHW | 1 | 1 | 1/10 |
-| dhw.tempstatus | temperature switch in assigned dhw (MC1) | int8 |   | false | DHW | 11 | 1 | 1 |
-| dhw.pump | pump | boolean |   | false | DHW | 4 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=0) | C | true | DHW | 12 | 1 | 1 |
-int8
-| dhw.difftemp | start differential temperature | int8 (>=0<=0) | C | true | DHW | 13 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=0<=0) | C | true | DHW | 8 | 1 | 1 |
-uint8
-| dhw.redtemp | reduced temperature | uint8 (>=0<=0) | C | true | DHW | 14 | 1 | 1 |
-uint8
-| dhw.requiredtemp | required temperature | uint8 (>=0<=0) | C | true | DHW | 15 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 9 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 10 | 1 | 1 |
-
-### SM200, MS200
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| dhw.temp | current temperature | uint16 | C | false | DHW | 1 | 1 | 1/10 |
-| dhw.tempstatus | temperature switch in assigned dhw (MC1) | int8 |   | false | DHW | 11 | 1 | 1 |
-| dhw.pump | pump | boolean |   | false | DHW | 4 | 1 | 1 |
-uint8
-| dhw.maxtemp | maximum temperature | uint8 (>=0<=0) | C | true | DHW | 12 | 1 | 1 |
-int8
-| dhw.difftemp | start differential temperature | int8 (>=0<=0) | C | true | DHW | 13 | 1 | 1 |
-uint8
-| dhw.disinfectiontemp | disinfection temperature | uint8 (>=0<=0) | C | true | DHW | 8 | 1 | 1 |
-uint8
-| dhw.redtemp | reduced temperature | uint8 (>=0<=0) | C | true | DHW | 14 | 1 | 1 |
-uint8
-| dhw.requiredtemp | required temperature | uint8 (>=0<=0) | C | true | DHW | 15 | 1 | 1 |
-| dhw.circ | circulation active | boolean |   | true | DHW | 9 | 1 | 1 |
-| dhw.circmode | circulation pump mode | enum |   | true | DHW | 10 | 1 | 1 |
-
-## Devices of type \_pool
-
-### MP100
-
-| shortname | fullname | type | uom | writeable | tag type | register offset | register count | scale factor |
-|-|-|-|-|-|-|-|-|-|
-| pooltemp | pool temperature | int16 | C | false | DEVICE_DATA | -1 | 1 | 1/10 |
-| poolshuntstatus | valve status | enum |   | false | DEVICE_DATA | -1 | 1 | 1 |
-| poolshunt | valve actual | uint8 | % | false | DEVICE_DATA | -1 | 1 | 1 |
-| poolshuntset | valve setpoint | uint8 | % | false | DEVICE_DATA | -1 | 1 | 1 |
-| poolrequest | pool request | boolean |   | false | DEVICE_DATA | -1 | 1 | 1 |
-