mem debugging

platformio.ini

@@ -3,7 +3,8 @@
 ;
 
 [platformio]
-default_envs = release
+;default_envs = release
+default_envs = debug
 
 [common]
 ; custom build options are:
@@ -15,7 +16,8 @@ default_envs = release
 custom_flags =
 
 ;general_flags = -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH -DVTABLES_IN_FLASH
-general_flags = -fno-exceptions -lstdc++ -DNO_GLOBAL_EEPROM -O2 -DBEARSSL_SSL_BASIC 
+;general_flags = -fno-exceptions -lstdc++ -DNO_GLOBAL_EEPROM -O2 -DBEARSSL_SSL_BASIC 
+general_flags =
 
 [env]
 framework = arduino
@@ -42,6 +44,9 @@ monitor_speed = 115200
 upload_protocol = espota
 upload_port = ems-esp.local
 
+# These following targets are used by TravisCI to build the firmware versions on Release
+# Do not modify
+
 [env:travis]
 board = esp12e
 build_flags = ${common.general_flags}
@@ -67,6 +72,8 @@ board = nodemcu
 build_flags = ${common.general_flags}
 extra_scripts = scripts/main_script.py
 
+# These two targets (release and debug) can be modified
+
 [env:debug]
 board = d1_mini
 build_type = debug

src/ems.cpp

@@ -711,16 +711,17 @@ void _createValidate() {
     // copy old Write record
     new_EMS_TxTelegram.type_validate      = EMS_TxTelegram.type;          // save the original type in the type_validate, increase we need to re-try
     new_EMS_TxTelegram.type               = EMS_TxTelegram.type_validate; // new type is the validate type
-
     new_EMS_TxTelegram.dest               = EMS_TxTelegram.dest;
     new_EMS_TxTelegram.comparisonValue    = EMS_TxTelegram.comparisonValue;
     new_EMS_TxTelegram.comparisonPostRead = EMS_TxTelegram.comparisonPostRead;
     new_EMS_TxTelegram.comparisonOffset   = EMS_TxTelegram.comparisonOffset;
+    new_EMS_TxTelegram.forceRefresh       = EMS_TxTelegram.forceRefresh;
 
     // this is what is different
     new_EMS_TxTelegram.offset    = EMS_TxTelegram.comparisonOffset; // location of byte to fetch
     new_EMS_TxTelegram.dataValue = 1;                               // fetch single byte
     new_EMS_TxTelegram.length    = EMS_MIN_TELEGRAM_LENGTH;         // is always 6 bytes long (including CRC at end)
+    new_EMS_TxTelegram.timestamp = millis();
 
     // remove old telegram from queue and add this new read one
     EMS_TxQueue.shift();                     // remove from queue

src/ems.h

@@ -247,7 +247,7 @@ const _EMS_Device_Types EMS_Devices_Types[] = {
 // for storing all recognised EMS devices
 typedef struct {
     _EMS_DEVICE_TYPE device_type;  // type
-    uint8_t          product_id;   // product id for looking up details in _EMS_Devices
+    uint8_t          product_id;   // product id for looking up details in EMS_Devices
     uint8_t          device_id;    // the device_id
     uint8_t          device_index; // where it is in the EMS_Devices table
     char             version[10];  // the version number XX.XX
@@ -255,11 +255,10 @@ typedef struct {
 } _Detected_Device;
 
 #define EMS_DEVICE_FLAG_NONE 0   // no flags set
+#define EMS_DEVICE_FLAG_SM10 10  // solar module1
+#define EMS_DEVICE_FLAG_SM100 11 // solar module2
 
-#define EMS_DEVICE_FLAG_SM10 10
-#define EMS_DEVICE_FLAG_SM100 11
-
-// group flags for thermostats
+// group flags specific for thermostats
 #define EMS_DEVICE_FLAG_NO_WRITE 0x80 // top bit set if can't write yet
 #define EMS_DEVICE_FLAG_EASY 1
 #define EMS_DEVICE_FLAG_RC10 2