andry/EMS-ESP32
1
0
Fork 0
mirror of https://github.com/emsesp/EMS-ESP32.git synced 2025-12-07 16:29:51 +03:00
Code Issues Packages Projects Releases Wiki Activity

tx logic "take two"

Browse Source
This commit is contained in:
proddy
2019-05-24 11:39:38 +02:00
parent b394940e21
commit df34e296a3
4 changed files with 5 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
src/ems-esp.cpp
View File

@@ -1539,7 +1539,7 @@ void WIFICallback() {
// This is done after we have a WiFi signal to avoid any resource conflicts
if (myESP.getUseSerial()) {
myDebug_P(PSTR("Warning! EMS bus disabled when in Serial mode. Use 'set serial off' to start EMS."));
myDebug_P(PSTR("Warning! EMS bus communication disabled when Serial mode enabled. Use 'set serial off' to start communication."));
} else {
emsuart_init();
myDebug_P(PSTR("[UART] Opened Rx/Tx connection"));

1
src/ems.cpp
View File

@@ -331,7 +331,6 @@ bool ems_getPoll() {
void ems_setTxDelay(uint8_t delay) {
EMS_Sys_Status.emsTxDelay = delay;
myDebug_P(PSTR("EMS Tx delay is %d"), EMS_Sys_Status.emsTxDelay);
}
uint8_t ems_getTxDelay() {

16
src/emsuart.cpp
View File

@@ -119,7 +119,7 @@ void ICACHE_FLASH_ATTR emsuart_init() {
USC1(EMSUART_UART) = (EMS_MAX_TELEGRAM_LENGTH << UCFFT) | (0x02 << UCTOT) | (1 << UCTOE); // enable interupts
// set interrupts for triggers
USIC(EMSUART_UART) = 0xffff; // clear all interupts
USIC(EMSUART_UART) = 0xFFFF; // clear all interupts
USIE(EMSUART_UART) = 0; // disable all interrupts
// enable rx break, fifo full and timeout.
@@ -143,15 +143,10 @@ void ICACHE_FLASH_ATTR emsuart_init() {
/*
* stop UART0 driver
* This is called prior to an OTA upload and also before a save to SPIFFS to prevent conflicts
*/
void ICACHE_FLASH_ATTR emsuart_stop() {
ETS_UART_INTR_DISABLE();
ETS_UART_INTR_ATTACH(NULL, NULL);
noInterrupts();
#ifndef NO_UART_SWAP
//detachInterrupt(digitalPinToInterrupt(D7));
system_uart_swap(); // to be sure, swap Tx/Rx back.
#endif
}
/*
@@ -169,7 +164,7 @@ void ICACHE_FLASH_ATTR emsuart_tx_brk() {
uint32_t tmp;
// must make sure Tx FIFO is empty
while (((USS(EMSUART_UART) >> USTXC) & 0xff) != 0)
while (((USS(EMSUART_UART) >> USTXC) & 0xFF) != 0)
;
tmp = ((1 << UCRXRST) | (1 << UCTXRST)); // bit mask
@@ -198,7 +193,6 @@ static inline void ICACHE_FLASH_ATTR emsuart_loopback(bool enable) {
* Send to Tx, ending with a <BRK>
*/
void ICACHE_FLASH_ATTR emsuart_tx_buffer(uint8_t * buf, uint8_t len) {
uint32_t tmp;
// backwards compatibility
if (EMS_Sys_Status.emsTxDelay < 2) {
@@ -222,8 +216,6 @@ void ICACHE_FLASH_ATTR emsuart_tx_buffer(uint8_t * buf, uint8_t len) {
* At end of receive we re-enable Rx-INT and send a Tx-BRK in loopback mode.
*/
/* COMMENTED OUT - NOT WORKING
ETS_UART_INTR_DISABLE(); // disable rx interrupt
emsuart_flush_fifos();
@@ -253,10 +245,8 @@ void ICACHE_FLASH_ATTR emsuart_tx_buffer(uint8_t * buf, uint8_t len) {
emsuart_loopback(false); // disable loopback mode
}
ETS_UART_INTR_ENABLE(); // receive anything from FIFO...
*/
}
}

2
src/version.h
View File

@@ -6,5 +6,5 @@
#pragma once
#define APP_NAME "EMS-ESP"
#define APP_VERSION "1.8.0b2"
#define APP_VERSION "1.8.0b3"
#define APP_HOSTNAME "ems-esp"