andry/EMS-ESP32
1
0
Fork 0
mirror of https://github.com/emsesp/EMS-ESP32.git synced 2025-12-07 16:29:51 +03:00
Code Issues Packages Projects Releases Wiki Activity

version 1.2.0. See ChangeLog

Browse Source
This commit is contained in:
proddy
2019-01-02 00:14:36 +01:00
parent aaa8505402
commit e14c2c658c
21 changed files with 3057 additions and 2009 deletions
Download Patch File Download Diff File Expand all files Collapse all files

44
src/my_config.h
View File

@@ -9,31 +9,25 @@
// these are set as -D build flags during compilation
// they can be set in platformio.ini or alternatively hard coded here
/*
#define WIFI_SSID "<my_ssid>"
#define WIFI_PASSWORD "<my_password>"
#define MQTT_IP "<broker_ip>"
#define MQTT_USER "<broker_username>"
#define MQTT_PASS "<broker_password>"
*/
// WIFI settings
//#define WIFI_SSID "<my_ssid>"
//#define WIFI_PASSWORD "<my_password>"
// MQTT settings
// Note port is the default 1883
//#define MQTT_IP "<broker_ip>"
//#define MQTT_USER "<broker_username>"
//#define MQTT_PASS "<broker_password>"
// default values
#define BOILER_THERMOSTAT_ENABLED 1 // thermostat support is enabled (1)
#define BOILER_SHOWER_TIMER 1 // monitors how long a shower has taken
#define BOILER_SHOWER_ALERT 0 // send alert if showetime exceeded
// define here the Thermostat type. see ems.h for the supported types
#define EMS_ID_THERMOSTAT EMS_ID_THERMOSTAT_RC20
//#define EMS_ID_THERMOSTAT EMS_ID_THERMOSTAT_RC30
//#define EMS_ID_THERMOSTAT EMS_ID_THERMOSTAT_EASY
// default values for shower logic on/off
#define BOILER_SHOWER_TIMER 1 // monitors how long a shower has taken
#define BOILER_SHOWER_ALERT 0 // send alert if showetime exceeded
// trigger settings to determine if hot tap water or the heating is active
#define EMS_BOILER_BURNPOWER_TAPWATER 100
#define EMS_BOILER_SELFLOWTEMP_HEATING 70
//define maximum settable tapwater temperature, not every installation supports 90 degrees
#define EMS_BOILER_TAPWATER_TEMPERATURE_MAX 60
// if using the shower timer, change these settings
#define SHOWER_PAUSE_TIME 15000 // in ms. 15 seconds, max time if water is switched off & on during a shower
#define SHOWER_MIN_DURATION 120000 // in ms. 2 minutes, before recognizing its a shower
@@ -41,8 +35,10 @@
#define SHOWER_OFFSET_TIME 5000 // in ms. 5 seconds grace time, to calibrate actual time under the shower
#define SHOWER_COLDSHOT_DURATION 10 // in seconds. 10 seconds for cold water before turning back hot water
// if using LEDs to show traffic, configure the GPIOs here
// only works if -DUSE_LED is set in platformio.ini
#define LED_RX D1 // GPIO5
#define LED_TX D2 // GPIO4
#define LED_ERR D3 // GPIO0
// The LED for showing connection errors, either onboard or via an external pull-up LED
// can be disabled using -DNO_LED build flag in platformio.ini
#define BOILER_LED LED_BUILTIN // LED_BULLETIN for onboard LED
//#define BOILER_LED D1 // for external LED like on the latest bbqkees boards
// set this if using an external temperature sensor like a DS18B20
#define TEMPERATURE_SENSOR_PIN D7