andry/EMS-ESP32
1
0
Fork 0
mirror of https://github.com/emsesp/EMS-ESP32.git synced 2025-12-08 16:59:50 +03:00
Code Issues Packages Projects Releases Wiki Activity

set EMSUART_TX_TIMEOUT to 256 so tx_mode 1 works again - #398

Browse Source
This commit is contained in:
proddy
2020-06-18 12:18:21 +02:00
parent fdd1c117d6
commit eae1137670
2 changed files with 20 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
src/uart/emsuart_esp8266.cpp
View File

@@ -35,7 +35,6 @@ uint8_t emsTxBufIdx;
uint8_t emsTxBufLen;
uint32_t emsTxWait;
//
// Main interrupt handler
// Important: must not use ICACHE_FLASH_ATTR
@@ -107,6 +106,7 @@ void ICACHE_RAM_ATTR EMSuart::emsuart_tx_timer_intr_handler() {
USC0(EMSUART_UART) |= (1 << UCBRK); // set <BRK>
}
}
/*
* init UART0 driver
*/
@@ -177,7 +177,6 @@ void ICACHE_FLASH_ATTR EMSuart::start(uint8_t tx_mode) {
ETS_UART_INTR_ATTACH(emsuart_rx_intr_handler, nullptr);
ETS_UART_INTR_ENABLE();
drop_next_rx = true;
// LOG_INFO(F("UART service for Rx/Tx started"));
// for sending with large delay in EMS+ mode we use a timer interrupt
timer1_attachInterrupt(emsuart_tx_timer_intr_handler); // Add ISR Function
@@ -212,7 +211,6 @@ void ICACHE_FLASH_ATTR EMSuart::restart() {
* Which is a 11-bit set of zero's (11 cycles)
*/
void ICACHE_FLASH_ATTR EMSuart::tx_brk() {
// make sure Tx FIFO is empty
while (((USS(EMSUART_UART) >> USTXC) & 0xFF)) {
}
@@ -253,11 +251,13 @@ void EMSuart::send_poll(uint8_t data) {
USF(EMSUART_UART) = data;
delayMicroseconds(EMSUART_TX_WAIT_PLUS);
tx_brk(); // send <BRK>
} else { // EMS1.0, same logic as in transmit
} else {
// tx_mode 1
// EMS1.0, same logic as in transmit
ETS_UART_INTR_DISABLE();
volatile uint8_t _usrxc = (USS(EMSUART_UART) >> USRXC) & 0xFF;
USF(EMSUART_UART) = data;
uint8_t timeoutcnt = EMSUART_TX_TIMEOUT;
uint16_t timeoutcnt = EMSUART_TX_TIMEOUT;
while ((((USS(EMSUART_UART) >> USRXC) & 0xFF) == _usrxc) && (--timeoutcnt > 0)) {
delayMicroseconds(EMSUART_TX_BUSY_WAIT); // burn CPU cycles...
}
@@ -306,7 +306,7 @@ uint16_t ICACHE_FLASH_ATTR EMSuart::transmit(uint8_t * buf, uint8_t len) {
}
// EMS+ https://github.com/proddy/EMS-ESP/issues/23#
if (tx_mode_ == EMS_TXMODE_EMSPLUS) { // With extra tx delay for EMS+
if (tx_mode_ == EMS_TXMODE_EMSPLUS) { // tx_mode 2, With extra tx delay for EMS+
for (uint8_t i = 0; i < len; i++) {
USF(EMSUART_UART) = buf[i];
delayMicroseconds(EMSUART_TX_WAIT_PLUS); // 2070
@@ -315,7 +315,7 @@ uint16_t ICACHE_FLASH_ATTR EMSuart::transmit(uint8_t * buf, uint8_t len) {
return EMS_TX_STATUS_OK;
}
// Junkers logic by @philrich
// Junkers logic by @philrich, tx_mode 3
if (tx_mode_ == EMS_TXMODE_HT3) {
for (uint8_t i = 0; i < len; i++) {
USF(EMSUART_UART) = buf[i];
@@ -362,7 +362,7 @@ uint16_t ICACHE_FLASH_ATTR EMSuart::transmit(uint8_t * buf, uint8_t len) {
// send the bytes along the serial line
for (uint8_t i = 0; i < len; i++) {
volatile uint8_t _usrxc = (USS(EMSUART_UART) >> USRXC) & 0xFF;
uint8_t timeoutcnt = EMSUART_TX_TIMEOUT;
uint16_t timeoutcnt = EMSUART_TX_TIMEOUT;
USF(EMSUART_UART) = buf[i]; // send each Tx byte
// wait for echo
while ((((USS(EMSUART_UART) >> USRXC) & 0xFF) == _usrxc) && (--timeoutcnt > 0)) {
@@ -378,7 +378,7 @@ uint16_t ICACHE_FLASH_ATTR EMSuart::transmit(uint8_t * buf, uint8_t len) {
if (!(USIS(EMSUART_UART) & (1 << UIBD))) {
// no bus collision - send terminating BRK signal
USC0(EMSUART_UART) |= (1 << UCBRK); // set <BRK>
uint8_t timeoutcnt = EMSUART_TX_TIMEOUT;
uint16_t timeoutcnt = EMSUART_TX_TIMEOUT;
// wait until BRK detected...
while (!(USIR(EMSUART_UART) & (1 << UIBD)) && (--timeoutcnt > 0)) {
delayMicroseconds(EMSUART_TX_BUSY_WAIT);

4
src/uart/emsuart_esp8266.h
View File

@@ -23,7 +23,6 @@
#include <Arduino.h>
#include <user_interface.h>
#include <uuid/log.h>
#define EMSUART_UART 0 // UART 0
#define EMSUART_CONFIG 0x1C // 8N1 (8 bits, no parity, 1 stop bit)
@@ -46,7 +45,8 @@
// EMS 1.0
#define EMSUART_TX_BUSY_WAIT (EMSUART_TX_BIT_TIME / 8) // 13
#define EMSUART_TX_TIMEOUT (22 * EMSUART_TX_BIT_TIME / EMSUART_TX_BUSY_WAIT) // 176
// #define EMSUART_TX_TIMEOUT (22 * EMSUART_TX_BIT_TIME / EMSUART_TX_BUSY_WAIT) // 176
#define EMSUART_TX_TIMEOUT (42 * 8) // 256 for tx_mode 1
// HT3/Junkers - Time to send one Byte (8 Bits, 1 Start Bit, 1 Stop Bit) plus 7 bit delay. The -8 is for lag compensation.
// since we use a faster processor the lag is negligible