From fc604553adb46f95127aa12123d9aa3d585486aa Mon Sep 17 00:00:00 2001 From: proddy Date: Sun, 24 Feb 2019 18:27:25 +0100 Subject: [PATCH] mention about erasing SPIFFs --- README.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index d4d4865a7..91d757e92 100644 --- a/README.md +++ b/README.md @@ -324,7 +324,9 @@ The ESP8266 will start in Access Point (AP) mode. Connect via WiFi to the SSID * When flashing for the first time the Serial port is enabled by default with baud 115200. You can then use a PC with USB to the ESP8266 to set the settings like wifi, mqtt etc and also monitor the boot up procedure. Remember to disable the serial (`set serial off`) when connecting to the EMS lines. -The onboard LED will flash if there is no connection with the EMS bus. You can disable LED support by the 'set led' command from the telnet client +The onboard LED will flash if there is no connection with the EMS bus. You can disable LED support by the 'set led' command from the telnet client. + +If you want to completely erase the ESP and rebuild the firmware then do a `pio run -t erase` which will wipe the onboard flash including the SPIFFs where all the settings are stored. ## Known Issues