andry/EMS-ESP32
1
0
Fork 0
mirror of https://github.com/emsesp/EMS-ESP32.git synced 2025-12-09 01:09:51 +03:00
Code Issues Packages Projects Releases Wiki Activity
514 Commits 5 Branches 25 Tags
f8aabd9bf80e021db1cb4b78c147aece4781f143
Commit Graph

48 Commits

Author SHA1 Message Date
Paul
f8aabd9bf8 merged in https://github.com/proddy/EMS-ESP/pull/154 from @susisstrolch 2019-07-20 10:22:47 +02:00
Paul
3ba81d4e76 delay uart swap until after wifi connected 2019-07-19 16:12:40 +02:00
Susis Strolch
5587b9d267 reworks because of 'tx_mode 2' and protocol issues 
° added markers (GIO12, GPIO14) for logic analyzer debugging

° change UART initialisation
  - set RxFIFO full to 1 char, so we can detect active telegram on EMS-Bus
  - set RxTOT to 1 char for the same reason

° in ems_parseTelegram: ignore telegram if  emsRxStatus != EMS_RX_STATUS_IDLE
  because we missed to respond in a timely manner

° ems_tx_buffer is not void anymore, instead we return the Tx status
° extended the emsTxStatus
  - EMS_TX_WTD_TIMEOUT: timeout while waiting for echo of last Tx byte
    out telegram was ignored by the bus master, so the byte wasn't echoed
  - EMS_TX_BRK_DETECT:  BRK detected while sending the telegram
    bus master send us a break because of protocol violation

° add burnStarts, burnWorkMin and heatWorkMin to MQTT boiler message

TODO:
  + take care of ems_tx_buffer return code
  + accept direct telegram in ems_parse_telegram and do a proper acknowledge
  + split the heartbeat in static (version, IP-address) and dynamic (RSS etc)
  + change the hearbeat to a JSON structure so we can easier pick the uptime
 2019-07-19 13:16:23 +02:00
Susis Strolch
7d361061c6 add marker pins (GPIO12, GPIO14) for logic analyser 
° use faster macros for LA markers
 2019-07-18 11:26:43 +02:00
Paul
74abec2591 https://github.com/proddy/EMS-ESP/issues/143 2019-07-01 09:15:06 +02:00
Paul
4e50d13bd1 add tx_mode back as new tx code can cause resets 2019-06-26 22:02:16 +02:00
Paul
4b28a1d9b5 add check for max telegram length 2019-06-23 23:55:16 +02:00
Paul
3766780cab version 1.8.0 final 2019-06-15 15:24:56 +02:00
Paul
40659df6be optimize Tx to handle phantom brk 2019-06-11 22:27:46 +02:00
Paul
4ee2cc0f6c improved crash detection 2019-06-09 22:12:38 +02:00
Paul
b3bdcd2228 merged Junkers FW100 & ISM1 2019-06-08 17:22:22 +02:00
Paul
4b7db73e74 cosemtic changes 2019-06-08 17:18:38 +02:00
proddy
16fc383a40 fix to tx_mode 2019-05-27 14:40:26 +02:00
Susis Strolch
fdebf6bbdf tx_mode=2: compensate phantom BRK 2019-05-27 12:47:06 +02:00
Susis Strolch
5479313e53 smart-tx - tx_mode 2 solved 
after sending the byte we wait until we receive the busmaster response.
sending the BRK is done in loopback mode.
Only caveat: we will get a phantom \0 in Rx FIFO
 2019-05-27 10:08:01 +02:00
proddy
4651987da8 tx_mode = tx_delay 2019-05-26 15:56:00 +02:00
proddy
1d7310411f merge Junkers Tx logic 2019-05-26 12:23:50 +02:00
proddy
6995516ce0 fixed trailing ; in Tx 2019-05-25 10:24:11 +02:00
proddy
9cdd9c403c https://github.com/proddy/EMS-ESP/issues/103#issuecomment-495605798 2019-05-24 15:30:21 +02:00
proddy
1a638d2611 tx logic 2019-05-24 15:08:56 +02:00
proddy
c6a6dca81a empty rx fifo after Tx BRK 2019-05-24 12:28:23 +02:00
proddy
df34e296a3 tx logic "take two" 2019-05-24 11:39:38 +02:00
proddy
a555641ba3 EMS Tx del 2019-05-24 10:06:42 +02:00
proddy
dfbb804887 disabled tx code for mode 2 until we've fixed it 2019-05-24 09:23:18 +02:00
proddy
66ec810ea1 susisstrolch's Tx "take two" mod 2019-05-23 14:52:34 +02:00
proddy
57442db11c small changes 2019-05-22 18:48:27 +02:00
proddy
f9c5cb9dca merged Tx Delay https://github.com/proddy/EMS-ESP/pull/113 2019-05-21 23:50:47 +02:00
Susis Strolch
93b6b1ea4c smart tx - try to fix Tx problems 
- fix typo - replace emsaurt_tx_poll by emsuart_tx_poll
- smart tx - enabled by EMS_Sys_Status.emsTxDelay == 2
  use loopback to send in burst mode
- change emsuart_tx_poll to use emsuart_tx_buffer
- encapsulate uart_swap in #ifndef NO_UART_SWAP (private use)
 2019-05-21 22:50:26 +02:00
proddy
788441b2df improvements to raw mode 2019-05-07 21:26:50 +02:00
proddy
8814c2a504 more ems+ optimizations 2019-04-19 17:11:36 +02:00
proddy
3322f0af4f added 'autodetect deep' for a full scan 2019-04-15 19:28:33 +02:00
proddy
dc1d797d75 added tx_delay 2019-04-14 13:17:48 +02:00
proddy
b31f3118d1 prepare for ems plujs updates 2019-04-04 21:02:20 +02:00
proddy
8b0d91a9b8 ignore null telegrams 2019-03-24 19:45:59 +01:00
proddy
578783382a length is single byte as buffer should not exceed 32 2019-03-24 15:55:20 +01:00
proddy
7eaab743bf mem optimizatons 2019-03-20 21:55:40 +01:00
proddy
c3204783bc cleanup 2019-03-18 22:32:09 +01:00
proddy
4a559866c7 1.6.0 b2 2019-03-17 14:59:37 +01:00
proddy
9cbdc2ef70 minor updates from Simon Arlott 2019-03-15 19:45:31 +01:00
proddy
8342947cee swap uart back during ota upload 2019-03-14 08:36:53 +01:00
proddy
8e62a99417 1.5.7b 2019-03-10 15:09:51 +01:00
proddy
7957f781b2 minor comment change 2018-12-01 09:48:36 +01:00
proddy
e1b06328ad added new Version type 2018-05-29 21:20:34 +02:00
proddy
91473eb7ea small updates 2018-05-27 11:51:05 +02:00
proddy
643815bdc9 updated pics 2018-05-20 22:24:12 +02:00
proddy
615c5417de cleanup 2018-05-17 21:57:46 +02:00
proddy
37c2797d1a smaller images 2018-05-15 14:01:50 +02:00
proddy
4ab7bb6835 first commit 2018-05-14 23:16:06 +02:00