force v16 of nodejs

Add global names to Dallas sensors to avoid ugly <unknown> and other …

.github/workflows/tagged_release.yml

@@ -12,26 +12,24 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - name: Checkout source code
-        uses: actions/checkout@v2
 
-      - name: Compile locally
-        run: make
+      - uses: actions/checkout@v2
+      - uses: actions/setup-python@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: '16'
 
-      - name: Setup Python
-        uses: actions/setup-python@v2
-
-      - name: Install pio
+      - name: Install PlatformIO
         run: |
           python -m pip install --upgrade pip
           pip install -U platformio
           platformio upgrade
           platformio update
 
-      - name: Build web
+      - name: Build WebUI
         run: |
           cd interface
-          npm install
+          npm ci
           npm run build
 
       - name: Build firmware

.gitignore

@@ -1,5 +1,7 @@
 # vscode
 .vscode
+.directory
+workspace.code-workspace
 
 # build
 build/

CHANGELOG.md

@@ -5,7 +5,31 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## [3.1.0] May 4 2021
+# [3.1.1] June 26 2021
+
+## Changed
+
+- new command called `commands` which lists all available commands. `ems-esp/api/{device}/commands`
+- More Home Assistant icons to match the UOMs
+- new API. Using secure access tokens and OpenAPI standard. See `doc/EMS-ESP32 API.md` and [#50](https://github.com/emsesp/EMS-ESP32/issues/50)
+- show log messages in Web UI [#71](https://github.com/emsesp/EMS-ESP32/issues/71)
+
+## Fixed
+
+- HA thermostat mode was not in sync with actual mode [#66](https://github.com/emsesp/EMS-ESP32/issues/66)
+- Don't publish rssi if Wifi is disabled and ethernet is being used
+- Booleans are shown as true/false in API GETs
+
+## Changed
+
+- `info` command always shows full names in API. For short names query the device or name directly, e.g. `http://ems-esp/api/boiler`
+- free memory is shown in kilobytes
+- boiler's warm water entities have ww added to the Home Assistant entity name [#67](https://github.com/emsesp/EMS-ESP32/issues/67)
+- improved layout and rendering of device values in the WebUI, also the edit value screen
+
+# [3.1.0] May 4 2021
+
+## Changed
 
 - Mock API to simulate an ESP, for testing web
 - Able to write values from the Web UI
@@ -27,9 +51,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - lowercased Flow temp in commands
 - system console commands to main
 
-## Removed
-
-## [3.0.1] March 30 2021
+# [3.0.1] March 30 2021
 
 ## Added
 
@@ -87,9 +109,9 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 - Shower Alert (disabled for now)
 
-## [3.0.0] March 18 2021
+# [3.0.0] March 18 2021
 
-### Added
+## Added
 
 - Power settings, disabling BLE and turning off Wifi sleep
 - Rx and Tx counts to Heartbeat MQTT payload
@@ -106,7 +128,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - RC300 `thermostat temp -1` to clear temporary setpoint in auto mode
 - Syslog port selectable (#744)
 
-### Fixed
+## Fixed
 
 - telegrams matched to masterthermostat 0x18
 - multiple roomcontrollers
@@ -117,7 +139,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - wrong position of values #723, #732
 - OTA Upload via Web on OSX
 
-### Changed
+## Changed
 
 - changed how telegram parameters are rendered for mqtt, console and web (#632)
 - split `show values` in smaller packages (edited)

CHANGELOG_LATEST.md

@@ -2,22 +2,8 @@
 
 ## Added
 
-- new command called `commands` which lists all available commands. `ems-esp/api/{device}/commands`
-- More Home Assistant icons to match the UOMs
-- new API. Using secure access tokens and OpenAPI standard. See `doc/EMS-ESP32 API.md` and [#50](https://github.com/emsesp/EMS-ESP32/issues/50)
-- show log messages in Web UI [#71](https://github.com/emsesp/EMS-ESP32/issues/71)
-
 ## Fixed
 
-- HA thermostat mode was not in sync with actual mode [#66](https://github.com/emsesp/EMS-ESP32/issues/66)
-- Don't publish rssi if Wifi is disabled and ethernet is being used
-- Booleans are shown as true/false in API GETs
-
 ## Changed
 
-- `info` command always shows full names in API. For short names query the device or name directly, e.g. `http://ems-esp/api/boiler`
-- free memory is shown in kilobytes
-- boiler's warm water entities have ww added to the Home Assistant entity name [#67](https://github.com/emsesp/EMS-ESP32/issues/67)
-- improved layout and rendering of device values in the WebUI, also the edit value screen
-
 ## Removed

src/dallassensor.cpp

@@ -414,8 +414,11 @@ void DallasSensor::publish_values(const bool force) {
                 config["uniq_id"] = str;
 
                 JsonObject dev = config.createNestedObject("dev");
+                dev["name"]    = FJSON("EMS-ESP Dallas");               // Global name for device (all Dallas sensors, avoids using the very first name for the group)
+                dev["mf"]      = FJSON("Dallas");                       // Manufacturer (avoids the ugly <unknown> in HA)
+                dev["mdl"]     = FJSON("1Wire");                        // Model (avoids the ugly <unknown> in HA)
                 JsonArray  ids = dev.createNestedArray("ids");
-                ids.add("ems-esp");
+                ids.add("ems-esp-dallas");                              // Different ids as the other portions of the EMS-ESP
 
                 char topic[Mqtt::MQTT_TOPIC_MAX_SIZE];
                 if (dallas_format == Mqtt::Dallas_Format::SENSORID) {

src/version.h

@@ -1 +1 @@
-#define EMSESP_APP_VERSION "3.1.1b8"
+#define EMSESP_APP_VERSION "3.1.1"