Merge pull request #2651 from MichaelDvP/dev

add SRC tags,no remote for Junkers_old

.github/workflows/dev_release.yml

@@ -1,53 +1,60 @@
-name: 'pre-release'
+name: 'Build dev release'
 
 on:
   workflow_dispatch:
   push:
+    paths:
+      - 'src/emsesp_version.h'
     branches:
       - 'dev'
 
+permissions:
+  contents: write
+
 jobs:
   pre-release:
-    name: 'Automatic pre-release build'
+    name: 'Build Dev Release'
     runs-on: ubuntu-latest
     steps:
+        
+      - name: Install python 3.13
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.13'
+
+      - name: Install Node.js 22
+        uses: actions/setup-node@v4
+        with:
+          node-version: 22
+
       - name: Checkout repository
         uses: actions/checkout@v4
   
       - name: Enable Corepack
-        run: corepack enable
+        run: corepack enable pnpm
 
-      - name: Install python 3.11
-        uses: actions/setup-python@v5
-        with:
-          python-version: '3.11'
-
-      - name: Install Node.js 20
-        uses: actions/setup-node@v4
-        with:
-          node-version: '20.x'
-
-      - name: Get EMS-ESP version
+      - name: Get the EMS-ESP version
         id: build_info
         run: |
-          version=`grep -E '^#define EMSESP_APP_VERSION' ./src/version.h | awk -F'"' '{print $2}'`
+          version=`grep -E '^#define EMSESP_APP_VERSION' ./src/emsesp_version.h | awk -F'"' '{print $2}'`
           echo "VERSION=$version" >> $GITHUB_OUTPUT
 
       - name: Install PlatformIO
         run: |
           python -m pip install --upgrade pip
           pip install -U platformio
+          python -m pip install intelhex
 
-      - name: Build WebUI
+      - name: Build the WebUI
         run: |
           cd interface
-          yarn install
-          yarn typesafe-i18n --no-watch
+          pnpm install
+          pnpm typesafe-i18n --no-watch
           sed -i "s/= 'pl'/= 'en'/" ./src/i18n/i18n-util.ts
-          yarn build
-          yarn webUI
+          pnpm build
+          pnpm webUI
 
-      - name: Build all PIO target environments from default_envs
+      - name: Build all PIO target environments
         run: |
           platformio run
         env:

.github/workflows/github-releases-to-discord.yml

@@ -1,7 +1,6 @@
-name: 'github-releases-to-discord'
+name: 'Publish releases to discord'
 
 on:
-  workflow_dispatch:
   release:
     types: [published]
 

.github/workflows/pr_check.yml

@@ -1,4 +1,4 @@
-name: 'pr_check'
+name: 'Pre-check on PR'
 
 on:
   workflow_dispatch:

.github/workflows/sonar_check.yml

@@ -20,15 +20,12 @@ jobs:
         uses: actions/checkout@v4
         with:
           fetch-depth: 0
-
-      - name: Install sonar-scanner and build-wrapper
-        uses: SonarSource/sonarcloud-github-c-cpp@v2
-
-      - name: Run build-wrapper
-        run:  build-wrapper-linux-x86-64 --out-dir ${{ env.BUILD_WRAPPER_OUT_DIR }} make all
-
-      - name: Run sonar-scanner
+      - name: Install Build Wrapper
+        uses: SonarSource/sonarqube-scan-action/install-build-wrapper@master
+      - name: Run Build Wrapper
+        run: build-wrapper-linux-x86-64 --out-dir ${{ env.BUILD_WRAPPER_OUT_DIR }} make all
+      - name: SonarQube Scan
+        uses: SonarSource/sonarqube-scan-action@master
         env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
           SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }}
-        run: sonar-scanner --define sonar.cfamily.compile-commands="${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json"
+            

.github/workflows/stable_release.yml

@@ -1,4 +1,7 @@
-name: 'tagged-release'
+name: 'Build stable release'
+
+permissions:
+  contents: write
 
 on:
   workflow_dispatch:
@@ -8,40 +11,42 @@ on:
 
 jobs:
   tagged-release:
-    name: 'Tagged Release'
+    name: 'Build Stable Release'
     runs-on: ubuntu-latest
     steps:
+
+      - name: Install python 3.13
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.13'
+
+      - name: Install Node.js 22
+        uses: actions/setup-node@v4
+        with:
+          node-version: 22
+
       - name: Checkout repository
         uses: actions/checkout@v4
   
       - name: Enable Corepack
-        run: corepack enable
-
-      - name: Install python 3.11
-        uses: actions/setup-python@v5
-        with:
-          python-version: '3.11'
-
-      - name: Install Node.js 20
-        uses: actions/setup-node@v4
-        with:
-          node-version: '20.x'
+        run: corepack enable pnpm
 
       - name: Install PlatformIO
         run: |
           python -m pip install --upgrade pip
           pip install -U platformio
+          python -m pip install intelhex
 
-      - name: Build WebUI
+      - name: Build the WebUI
         run: |
           cd interface
-          yarn install
-          yarn typesafe-i18n --no-watch
+          pnpm install
+          pnpm typesafe-i18n --no-watch
           sed -i "s/= 'pl'/= 'en'/" ./src/i18n/i18n-util.ts
-          yarn build
-          yarn webUI
+          pnpm build
+          pnpm webUI
 
-      - name: Build all PIO target environments from default_envs
+      - name: Build all PIO target environments
         run: |
           platformio run
         env:

.github/workflows/stale_issues.yml

@@ -0,0 +1,23 @@
+name: "Mark or close stale issues and PRs"
+ 
+on:
+  schedule:
+    - cron: "30 1 * * *"
+
+jobs:
+  stale:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/stale@v9
+        with:
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          days-before-stale: 30
+          days-before-close: 5
+          stale-issue-message: "This issue is stale because it has been open 30 days with no activity. Remove stale label or comment otherwise this will be closed in 5 days."
+          stale-pr-message: "This PR has been automatically marked as stale because there has been no activity in last 30 days. It will be closed if no further activity occurs. Thank you for your contributions."
+          close-issue-message: "This issue was closed because it has been stalled for 5 days with no activity."
+          close-pr-message: "This PR was automatically closed because of being stale."
+          stale-pr-label: "stale"
+          stale-issue-label: "stale"
+          exempt-issue-labels: "bug,enhancement,pinned,security"
+          exempt-pr-labels: "bug,enhancement,pinned,security"

.github/workflows/test_release.yml

@@ -1,4 +1,4 @@
-name: 'test-release'
+name: 'Build test release'
 
 on:
   workflow_dispatch:
@@ -6,46 +6,55 @@ on:
     branches:
       - 'dev2'
 
+permissions:
+  contents: read
+
 jobs:
   pre-release:
-    name: 'Automatic test-release build'
+    name: 'Build Test Release'
     runs-on: ubuntu-latest
+    permissions:
+      contents: write
     steps:
-      - uses: actions/checkout@v4
 
-      - name: Enable Corepack
-        run: corepack enable
-
-      - uses: actions/setup-python@v5
+      - name: Install python 3.13
+        uses: actions/setup-python@v5
         with:
-          python-version: '3.11'
+          python-version: '3.13'
 
-      - name: Use Node.js 20.x
+      - name: Install Node.js 22
         uses: actions/setup-node@v4
         with:
-          node-version: '20.x'
+          node-version: 22
 
-      - name: Get EMS-ESP source code and version
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      - name: Enable Corepack
+        run: corepack enable pnpm
+
+      - name: Get the EMS-ESP version
         id: build_info
         run: |
-          version=`grep -E '^#define EMSESP_APP_VERSION' ./src/version.h | awk -F'"' '{print $2}'`
+          version=`grep -E '^#define EMSESP_APP_VERSION' ./src/emsesp_version.h | awk -F'"' '{print $2}'`
           echo "VERSION=$version" >> $GITHUB_OUTPUT
 
       - name: Install PlatformIO
         run: |
           python -m pip install --upgrade pip
           pip install -U platformio
+          python -m pip install intelhex
 
-      - name: Build WebUI
+      - name: Build the WebUI
         run: |
           cd interface
-          yarn install
-          yarn typesafe-i18n --no-watch
+          pnpm install
+          pnpm typesafe-i18n --no-watch
           sed -i "s/= 'pl'/= 'en'/" ./src/i18n/i18n-util.ts
-          yarn build
-          yarn webUI
+          pnpm build
+          pnpm webUI
 
-      - name: Build all target environments from default_envs
+      - name: Build all target environments
         run: |
           platformio run
         env:

.gitignore

@@ -28,14 +28,10 @@ stats.html
 *.sln
 *.sw?
 .pnp.*
-*/.yarn/cache/*
-*/.yarn/install-state.gz
 analyse.html
 interface/vite.config.ts.timestamp*
 *.local
 src/ESP32React/WWWData.h
-.yarn/*
-.yarnrc.yml
 
 # i18n generated files
 interface/src/i18n/i18n-react.tsx

CHANGELOG.md

@@ -217,7 +217,7 @@ For more details go to [docs.emsesp.org](https://docs.emsesp.org/).
 
 ## **IMPORTANT! BREAKING CHANGES**
 
-Writeable Text entities have moved from type `sensor` to `text` in Home Assistant to make them also editable within an HA dashboard. Examples are `datetime`, `holidays`, `switchtime`, `vacations`, `maintenancedate`. You will need to manually remove any old discovery topics from your MQTT broker using an application like MQTT Explorer.
+Writeable Text entities have moved from type `sensor` to `text` in Home Assistant to make them also editable within an HA dashboard. Examples are `datetime`, `holidays`, `switchtime`, `vacations`, `maintenancedate`... You will need to manually remove any old discovery topics from your MQTT broker using an application like MQTT Explorer.
 
 ## Added
 

CHANGELOG_LATEST.md

@@ -1 +1,55 @@
 # Changelog
+
+For more details go to [docs.emsesp.org](https://docs.emsesp.org/).
+
+## [3.7.3]
+
+## Added
+
+- analogsensor types: NTC and RGB-Led
+- Flag for HMC310 [#2465](https://github.com/emsesp/EMS-ESP32/issues/2465)
+- boiler auxheatersource [#2489](https://github.com/emsesp/EMS-ESP32/discussions/2489)
+- thermostat last error for RC100/300 [#2501](https://github.com/emsesp/EMS-ESP32/issues/2501)
+- boiler 0xC6 telegram [#1963](https://github.com/emsesp/EMS-ESP32/issues/1963)
+- CS6800i changes [#2448](https://github.com/emsesp/EMS-ESP32/issues/2448), [#2449](https://github.com/emsesp/EMS-ESP32/issues/2449)
+- charging pump [#2544](https://github.com/emsesp/EMS-ESP32/issues/2544)
+- hybrid CSH5800iG [#2569](https://github.com/emsesp/EMS-ESP32/issues/2569)
+- add EMS Device details to Home Assistant MQTT Discovery
+- disinfection command [#2601](https://github.com/emsesp/EMS-ESP32/issues/2601)
+- added new board profile for upcoming BBQKees E32V2.2
+- set differential pressure entity in Mixer device
+- set set climate action cooling/heating in HA [#2583](https://github.com/emsesp/EMS-ESP32/issues/2583)
+- Internal sensors of E32V2_2
+- FW200 display options [#2610](https://github.com/emsesp/EMS-ESP32/discussions/2610)
+- CR11 mode settings OFF/MANUAL depends on selTemp [#2437](https://github.com/emsesp/EMS-ESP32/issues/2437)
+- Fuse settings for BBQKees boards
+- Analogsensors for pulse output [#2624](https://github.com/emsesp/EMS-ESP32/discussions/2624)
+- Analogsensors frequency input [#2631](https://github.com/emsesp/EMS-ESP32/discussions/2631)
+- SRC plus thermostats [#2636](https://github.com/emsesp/EMS-ESP32/issues/2636)
+- Greenstar 2000 [#2645](https://github.com/emsesp/EMS-ESP32/issues/2645)
+
+## Fixed
+
+- dhw/switchtime [#2490](https://github.com/emsesp/EMS-ESP32/issues/2490)
+- switch to secure mqtt [#2492](https://github.com/emsesp/EMS-ESP32/issues/2492)
+- update link buttons [#2497](https://github.com/emsesp/EMS-ESP32/issues/2497)
+- refresh scheduler states [#2502](https://github.com/emsesp/EMS-ESP32/discussions/2502)
+- also rebuild HA config on mqtt connect for scheduler, custom and shower
+- FB100 controls the hc, not the master [#2510](https://github.com/emsesp/EMS-ESP32/issues/2510)
+- IPM DHW module, [#2524](https://github.com/emsesp/EMS-ESP32/issues/2524)
+- charge optimization [#2543](https://github.com/emsesp/EMS-ESP32/issues/2543)
+- shower active state retained, shows correctly in HA
+- MQTT Command Topic with slashes [#2571](https://github.com/emsesp/EMS-ESP32/issues/2571)
+- Add pulsed water meter input to V1.3 gateway with Lilygo S3 [#2550](https://github.com/emsesp/EMS-ESP32/issues/2550)
+- fix missing long 10-second press of Button to perform a factory reset
+- fix wwMaxPower on Junkers ZBS14 [#2609](https://github.com/emsesp/EMS-ESP32/issues/2609)
+- ventilation bypass state from telegram 0x55C [#1197](https://github.com/emsesp/EMS-ESP32/issues/1197)
+- set selflowtemp for ems+ boilers [#2641](https://github.com/emsesp/EMS-ESP32/discussions/2641)
+
+## Changed
+
+- show console log with ISO date/time [#2533](https://github.com/emsesp/EMS-ESP32/discussions/2533)
+- remove ESP32 CPU temperature
+- updated core libraries like AsyncTCP, AsyncWebServer and Modbus
+- remove command `scan deep`
+- ignore repeated `forceheatingoff` commands [#2641](https://github.com/emsesp/EMS-ESP32/discussions/2641)

Makefile

@@ -98,13 +98,10 @@ CXX := /usr/bin/g++
 # LDFLAGS   Linker Flags
 #----------------------------------------------------------------------
 CPPFLAGS  += $(DEFINES) $(DEFAULTS) $(INCLUDE)
-CPPFLAGS  += -ggdb -g3 -O3
-CPPFLAGS  += -MMD
+CPPFLAGS  += -ggdb -g3 -MMD
 CPPFLAGS  += -flto=auto -fno-lto
-CPPFLAGS  += -Wall -Wextra -Werror
-CPPFLAGS  += -Wswitch-enum
-CPPFLAGS  += -Wno-unused-parameter
-CPPFLAGS  += -Wno-missing-braces
+CPPFLAGS  += -Wall -Wextra -Werror -Wswitch-enum
+CPPFLAGS  += -Wno-unused-parameter -Wno-missing-braces -Wno-vla-cxx-extension
 
 CPPFLAGS  += $(EXTRA_CPPFLAGS)
 

README.md

@@ -60,7 +60,7 @@ It requires a small circuit to interface with the EMS bus which can be purchased
 
 ## 🚀  **Installing**
 
-Head over to [download.emsesp.org](https://download.emsesp.org) for instructions on how to install EMS-ESP. There is also further details on which boards are supported in [this section](https://docs.emsesp.org/Getting-Started/#first-time-install) of the documentation.
+Head over to [download.emsesp.org](https://download.emsesp.org) for instructions on how to install EMS-ESP. There is also further details on which boards are supported in [this section](https://docs.emsesp.org/Installing/) of the documentation.
 
 ## 📋  **Documentation**
 
@@ -88,7 +88,7 @@ If you like **EMS-ESP**, please give it a ✨ on GitHub, or even better fork it
 - [uuid-\*](https://github.com/nomis/mcu-uuid-console) from @nomis. The console, syslog, telnet and logging are based off these awesome open source libraries
 - [ArduinoJson](https://github.com/bblanchon/ArduinoJson) for all the JSON processing
 - [espMqttClient](https://github.com/bertmelis/espMqttClient) for the MQTT client
-- ESPAsyncWebServer and AsyncTCP for the Web server and TCP backends, with custom modifications for performance
+- [ESPAsyncWebServer](https://github.com/ESP32Async/ESPAsyncWebServer) and [AsyncTCP](https://github.com/ESP32Async/AsyncTCP) for the Web server and TCP backends
 
 ## 📜  **License**
 

boards/seeed_xiao_esp32c6.json

@@ -0,0 +1,48 @@
+{
+  "build": {
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_XIAO_ESP32C6",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_CDC_ON_BOOT=1"
+    ],
+    "f_cpu": "160000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      [
+        "0x2886",
+        "0x0046"
+      ],
+      [
+        "0x303a",
+        "0x1001"
+      ]
+    ],
+    "mcu": "esp32c6",
+    "variant": "XIAO_ESP32C6"
+  },
+  "connectivity": [
+    "wifi",
+    "bluetooth",
+    "zigbee",
+    "thread"
+  ],
+  "debug": {
+    "openocd_target": "esp32c6.cfg"
+  },
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "Seeed Studio XIAO ESP32C6",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://wiki.seeedstudio.com/XIAO_ESP32C6_Getting_Started/",
+  "vendor": "Seeed Studio"
+}

cspell.json

@@ -32,6 +32,7 @@
     "**/*.json",
     "src/core/modbus_entity_parameters.hpp",
     "sdkconfig.*",
-    "managed_components/**"
+    "managed_components/**",
+    "pnpm-*.yaml"
   ]
   }

docs/dump_telegrams.csv

@@ -13,9 +13,9 @@ telegram_type_id,name,is_fetched
 0x19,UBAMonitorSlow, 
 0x1A,UBASetPoints, 
 0x1C,UBAMaintenanceStatus, 
-0x1E,WM10TempMessage, 
+0x1E,HydrTemp, 
 0x23,JunkersSetMixer,fetched
-0x26,UBASettingsWW,fetched
+0x27,UBASettingsWW,fetched
 0x28,WeatherComp,fetched
 0x2A,MC110Status, 
 0x2E,Meters, 
@@ -62,7 +62,9 @@ telegram_type_id,name,is_fetched
 0xB1,RC10Monitor, 
 0xBB,HybridSettings,fetched
 0xBF,ErrorMessage, 
+0xC0,RCErrorMessage, 
 0xC2,UBAErrorMessage3, 
+0xC6,UBAErrorMessage3, 
 0xD1,UBAOutdoorTemp, 
 0xE3,UBAMonitorSlowPlus2, 
 0xE4,UBAMonitorFastPlus, 
@@ -74,7 +76,7 @@ telegram_type_id,name,is_fetched
 0x0103,ISM1StatusMessage,fetched
 0x0104,ISM2StatusMessage, 
 0x010C,IPMStatusMessage, 
-0x011E,IPMTempMessage, 
+0x011E,JunkersDisp,fetched
 0x012E,HPEnergy1, 
 0x013B,HPEnergy2, 
 0x0165,JunkersSet, 
@@ -109,9 +111,9 @@ telegram_type_id,name,is_fetched
 0x02A0,RC300Curves, 
 0x02A1,RC300Curves, 
 0x02A2,RC300Curves, 
-0x02A5,RC300Monitor,fetched
+0x02A5,RC300Monitor, 
 0x02A6,RC300Monitor, 
-0x02A7,CRFMonitor, 
+0x02A7,RC300Monitor, 
 0x02A8,RC300Monitor, 
 0x02A9,RC300Monitor, 
 0x02AA,RC300Monitor, 
@@ -140,6 +142,7 @@ telegram_type_id,name,is_fetched
 0x02D2,RC300Set2, 
 0x02D6,HPPump2,fetched
 0x02D7,MMPLUSStatusMessage, 
+0x02E0,UBASetPoints, 
 0x02F5,RC300WWmode,fetched
 0x02F6,RC300WW2mode,fetched
 0x0313,MMPLUSConfigMessage_WWC,fetched
@@ -196,6 +199,7 @@ telegram_type_id,name,is_fetched
 0x04AA,HPPower2,fetched
 0x04AE,HPEnergy,fetched
 0x04AF,HPMeters,fetched
+0x055C,VentilationSet,fetched
 0x056B,VentilationMode,fetched
 0x0583,VentilationMonitor, 
 0x0585,Blowerspeed, 

interface/.gitattributes

@@ -1,4 +0,0 @@
-/.yarn/**            linguist-vendored
-/.yarn/releases/*    binary
-/.yarn/plugins/**/*  binary
-/.pnp.*              binary linguist-generated

interface/.prettierignore

@@ -4,5 +4,4 @@ dist/
 src/i18n/*
 
 .prettierrc
-.yarn/
 .typesafe-i18n.json

interface/.yarnrc.yml

@@ -1,3 +0,0 @@
-nodeLinker: node-modules
-
-yarnPath: .yarn/releases/yarn-4.7.0.cjs

interface/package.json

@@ -8,59 +8,60 @@
   "private": true,
   "type": "module",
   "scripts": {
+    "preinstall": "npx only-allow pnpm",
     "dev": "vite dev",
     "build": "vite build",
     "preview": "vite preview",
-    "build-hosted": "typesafe-i18n --no-watch && vite build --mode hosted",
-    "preview-standalone": "typesafe-i18n --no-watch && vite build && concurrently -c \"auto\" \"yarn:mock-rest\" \"vite preview\"",
-    "mock-rest": "bun --watch ../mock-api/rest_server.ts",
-    "standalone": "concurrently -c \"auto\" \"typesafe-i18n\" \"yarn:mock-rest\" \"vite\"",
+    "build-hosted": "typesafe-i18n && vite build --mode hosted",
+    "preview-standalone": "typesafe-i18n --no-watch && vite build && concurrently -c \"auto\" \"pnpm:mock-rest\" \"vite preview\"",
+    "mock-rest": "bun --watch ../mock-api/restServer.ts",
+    "standalone": "concurrently -c \"auto\" \"typesafe-i18n\" \"pnpm:mock-rest\" \"vite\"",
     "typesafe-i18n": "typesafe-i18n --no-watch",
     "webUI": "node progmem-generator.js",
     "format": "prettier -l -w '**/*.{ts,tsx,js,css,json,md}'",
     "lint": "eslint . --fix"
   },
   "dependencies": {
-    "@alova/adapter-xhr": "2.1.1",
+    "@alova/adapter-xhr": "2.2.1",
     "@emotion/react": "^11.14.0",
-    "@emotion/styled": "^11.14.0",
-    "@mui/icons-material": "^6.4.8",
-    "@mui/material": "^6.4.8",
-    "@table-library/react-table-library": "4.1.12",
-    "alova": "3.2.10",
+    "@emotion/styled": "^11.14.1",
+    "@mui/icons-material": "^7.3.4",
+    "@mui/material": "^7.3.4",
+    "@table-library/react-table-library": "4.1.15",
+    "alova": "3.3.4",
     "async-validator": "^4.2.5",
+    "formidable": "^3.5.4",
     "jwt-decode": "^4.0.0",
-    "mime-types": "^2.1.35",
-    "preact": "^10.26.4",
-    "react": "^19.0.0",
-    "react-dom": "^19.0.0",
+    "magic-string": "^0.30.19",
+    "mime-types": "^3.0.1",
+    "preact": "^10.27.2",
+    "react": "^19.2.0",
+    "react-dom": "^19.2.0",
     "react-icons": "^5.5.0",
-    "react-router": "^7.4.0",
+    "react-router": "^7.9.3",
     "react-toastify": "^11.0.5",
     "typesafe-i18n": "^5.26.2",
-    "typescript": "^5.8.2"
+    "typescript": "^5.9.3"
   },
   "devDependencies": {
-    "@babel/core": "^7.26.10",
-    "@eslint/js": "^9.23.0",
+    "@babel/core": "^7.28.4",
+    "@eslint/js": "^9.37.0",
     "@preact/compat": "^18.3.1",
-    "@preact/preset-vite": "^2.10.1",
+    "@preact/preset-vite": "^2.10.2",
     "@trivago/prettier-plugin-sort-imports": "^5.2.2",
-    "@types/formidable": "^3",
-    "@types/node": "^22.13.11",
-    "@types/react": "^19.0.12",
-    "@types/react-dom": "^19.0.4",
-    "concurrently": "^9.1.2",
-    "eslint": "^9.23.0",
-    "eslint-config-prettier": "^10.1.1",
-    "formidable": "^3.5.2",
-    "prettier": "^3.5.3",
-    "rollup-plugin-visualizer": "^5.14.0",
-    "terser": "^5.39.0",
-    "typescript-eslint": "8.27.0",
-    "vite": "^6.2.2",
+    "@types/node": "^24.7.0",
+    "@types/react": "^19.2.2",
+    "@types/react-dom": "^19.2.1",
+    "concurrently": "^9.2.1",
+    "eslint": "^9.37.0",
+    "eslint-config-prettier": "^10.1.8",
+    "prettier": "^3.6.2",
+    "rollup-plugin-visualizer": "^6.0.4",
+    "terser": "^5.44.0",
+    "typescript-eslint": "^8.46.0",
+    "vite": "^7.1.9",
     "vite-plugin-imagemin": "^0.6.1",
     "vite-tsconfig-paths": "^5.1.4"
   },
-  "packageManager": "yarn@4.7.0"
+  "packageManager": "pnpm@10.18.1+sha512.77a884a165cbba2d8d1c19e3b4880eee6d2fcabd0d879121e282196b80042351d5eb3ca0935fa599da1dc51265cc68816ad2bddd2a2de5ea9fdf92adbec7cd34"
 }

interface/pnpm-workspace.yaml

@@ -0,0 +1,8 @@
+onlyBuiltDependencies:
+  - cwebp-bin
+  - esbuild
+  - gifsicle
+  - jpegtran-bin
+  - mozjpeg
+  - optipng-bin
+  - pngquant-bin

interface/src/api/app.ts

@@ -143,7 +143,8 @@ export const readCustomEntities = () =>
         o_name: ei.name,
         o_writeable: ei.writeable,
         o_value: ei.value,
-        o_deleted: ei.deleted
+        o_deleted: ei.deleted,
+        o_hide: ei.hide
       }));
     }
   });

interface/src/app/main/CustomEntities.tsx

@@ -76,6 +76,7 @@ const CustomEntities = () => {
       ei.factor !== ei.o_factor ||
       ei.value_type !== ei.o_value_type ||
       ei.writeable !== ei.o_writeable ||
+      ei.hide !== ei.o_hide ||
       ei.deleted !== ei.o_deleted ||
       (ei.value || '') !== (ei.o_value || '')
     );
@@ -147,6 +148,7 @@ const CustomEntities = () => {
           factor: condensed_ei.factor,
           uom: condensed_ei.uom,
           writeable: condensed_ei.writeable,
+          hide: condensed_ei.hide,
           value_type: condensed_ei.value_type,
           value: condensed_ei.value
         }))
@@ -209,6 +211,7 @@ const CustomEntities = () => {
       value_type: item.value_type,
       writeable: item.writeable,
       deleted: false,
+      hide: item.hide,
       value: item.value
     });
     setDialogOpen(true);

interface/src/app/main/CustomEntitiesDialog.tsx

@@ -2,7 +2,11 @@ import { useEffect, useState } from 'react';
 
 import AddIcon from '@mui/icons-material/Add';
 import CancelIcon from '@mui/icons-material/Cancel';
+import CommentsDisabledOutlinedIcon from '@mui/icons-material/CommentsDisabledOutlined';
 import DoneIcon from '@mui/icons-material/Done';
+import EditOffOutlinedIcon from '@mui/icons-material/EditOffOutlined';
+import EditOutlinedIcon from '@mui/icons-material/EditOutlined';
+import InsertCommentOutlinedIcon from '@mui/icons-material/InsertCommentOutlined';
 import RemoveIcon from '@mui/icons-material/RemoveCircleOutline';
 import {
   Box,
@@ -12,7 +16,7 @@ import {
   DialogActions,
   DialogContent,
   DialogTitle,
-  Grid2 as Grid,
+  Grid,
   InputAdornment,
   MenuItem,
   TextField
@@ -128,6 +132,20 @@ const CustomEntitiesDialog = ({
               onChange={updateFormValue}
             />
           </Grid>
+          <Grid mt={3}>
+            <BlockFormControlLabel
+              control={
+                <Checkbox
+                  icon={<InsertCommentOutlinedIcon htmlColor="white" />}
+                  checkedIcon={<CommentsDisabledOutlinedIcon color="primary" />}
+                  checked={editItem.hide}
+                  onChange={updateFormValue}
+                  name="hide"
+                />
+              }
+              label="API/MQTT"
+            />
+          </Grid>
           <Grid>
             <TextField
               name="ram"
@@ -177,10 +195,12 @@ const CustomEntitiesDialog = ({
           )}
           {editItem.ram === 0 && (
             <>
-              <Grid mt={3} size={9}>
+              <Grid mt={3}>
                 <BlockFormControlLabel
                   control={
                     <Checkbox
+                      icon={<EditOffOutlinedIcon color="primary" />}
+                      checkedIcon={<EditOutlinedIcon htmlColor="white" />}
                       checked={editItem.writeable}
                       onChange={updateFormValue}
                       name="writeable"

interface/src/app/main/Customizations.tsx

@@ -16,7 +16,7 @@ import {
   DialogActions,
   DialogContent,
   DialogTitle,
-  Grid2 as Grid,
+  Grid,
   InputAdornment,
   Link,
   MenuItem,
@@ -306,7 +306,7 @@ const Customizations = () => {
 
   const filter_entity = (de: DeviceEntity) =>
     (de.m & selectedFilters || !selectedFilters) &&
-    formatName(de, true).includes(search);
+    formatName(de, true).toLowerCase().includes(search.toLowerCase());
 
   const maskDisabled = (set: boolean) => {
     setDeviceEntities(

interface/src/app/main/CustomizationsDialog.tsx

@@ -10,7 +10,7 @@ import {
   DialogActions,
   DialogContent,
   DialogTitle,
-  Grid2 as Grid,
+  Grid,
   TextField,
   Typography
 } from '@mui/material';

interface/src/app/main/Devices.tsx

@@ -31,7 +31,7 @@ import {
   DialogActions,
   DialogContent,
   DialogTitle,
-  Grid2 as Grid,
+  Grid,
   IconButton,
   InputAdornment,
   List,
@@ -600,9 +600,11 @@ const Devices = () => {
       ? deviceData.nodes.filter(
           (dv) =>
             hasMask(dv.id, DeviceEntityMask.DV_FAVORITE) &&
-            dv.id.slice(2).includes(search)
+            dv.id.slice(2).toLowerCase().includes(search.toLowerCase())
         )
-      : deviceData.nodes.filter((dv) => dv.id.slice(2).includes(search));
+      : deviceData.nodes.filter((dv) =>
+          dv.id.slice(2).toLowerCase().includes(search.toLowerCase())
+        );
 
     const deviceIndex = coreData.devices.findIndex(
       (d) => d.id === device_select.state.id

interface/src/app/main/DevicesDialog.tsx

@@ -11,7 +11,7 @@ import {
   DialogContent,
   DialogTitle,
   FormHelperText,
-  Grid2 as Grid,
+  Grid,
   InputAdornment,
   MenuItem,
   TextField,

interface/src/app/main/Help.tsx

@@ -41,7 +41,8 @@ const Help = () => {
 
   useRequest(() => callAction({ action: 'getCustomSupport' })).onSuccess((event) => {
     if (event && event.data && Object.keys(event.data).length !== 0) {
-      const data = event.data.Support;
+      const data = (event.data as { Support: { img_url?: string; html?: string[] } })
+        .Support;
       if (data.img_url) {
         setCustomSupportIMG(data.img_url);
       }
@@ -59,7 +60,7 @@ const Help = () => {
       toast.info(LL.DOWNLOAD_SUCCESSFUL());
     })
     .onError((error) => {
-      toast.error(error.message);
+      toast.error(String(error.error?.message || 'An error occurred'));
     });
 
   return (

interface/src/app/main/ModulesDialog.tsx

@@ -10,7 +10,7 @@ import {
   DialogActions,
   DialogContent,
   DialogTitle,
-  Grid2 as Grid,
+  Grid,
   TextField
 } from '@mui/material';
 

interface/src/app/main/Scheduler.tsx

@@ -27,6 +27,7 @@ import {
   useLayoutTitle
 } from 'components';
 import { useI18nContext } from 'i18n/i18n-react';
+import { useInterval } from 'utils';
 
 import { readSchedule, writeSchedule } from '../../api/app';
 import SettingsSchedulerDialog from './SchedulerDialog';
@@ -73,6 +74,12 @@ const Scheduler = () => {
     );
   }
 
+  useInterval(() => {
+    if (numChanges === 0) {
+      void fetchSchedule();
+    }
+  });
+
   useEffect(() => {
     const formatter = new Intl.DateTimeFormat(locale, {
       weekday: 'short',

interface/src/app/main/SchedulerDialog.tsx

@@ -13,7 +13,7 @@ import {
   DialogActions,
   DialogContent,
   DialogTitle,
-  Grid2 as Grid,
+  Grid,
   TextField,
   ToggleButton,
   ToggleButtonGroup,

interface/src/app/main/Sensors.tsx

@@ -439,7 +439,8 @@ const Sensors = () => {
                 <Cell>{a.n}</Cell>
                 <Cell stiff>{AnalogTypeNames[a.t]} </Cell>
                 {(a.t === AnalogType.DIGITAL_OUT && a.g !== 25 && a.g !== 26) ||
-                a.t === AnalogType.DIGITAL_IN ? (
+                a.t === AnalogType.DIGITAL_IN ||
+                a.t === AnalogType.PULSE ? (
                   <Cell stiff>{a.v ? LL.ON() : LL.OFF()}</Cell>
                 ) : (
                   <Cell stiff>{a.t ? formatValue(a.v, a.u) : ''}</Cell>

interface/src/app/main/SensorsAnalogDialog.tsx

@@ -10,7 +10,7 @@ import {
   DialogActions,
   DialogContent,
   DialogTitle,
-  Grid2 as Grid,
+  Grid,
   InputAdornment,
   MenuItem,
   TextField,
@@ -132,7 +132,9 @@ const SensorsAnalogDialog = ({
               ))}
             </TextField>
           </Grid>
-          {editItem.t >= AnalogType.COUNTER && editItem.t <= AnalogType.RATE && (
+          {((editItem.t >= AnalogType.COUNTER && editItem.t <= AnalogType.RATE) ||
+            (editItem.t >= AnalogType.FREQ_0 &&
+              editItem.t <= AnalogType.FREQ_2)) && (
             <Grid>
               <TextField
                 name="u"
@@ -171,6 +173,27 @@ const SensorsAnalogDialog = ({
               />
             </Grid>
           )}
+          {editItem.t === AnalogType.NTC && (
+            <Grid>
+              <TextField
+                name="o"
+                label={LL.OFFSET()}
+                value={numberValue(editItem.o)}
+                sx={{ width: '11ch' }}
+                type="number"
+                variant="outlined"
+                onChange={updateFormValue}
+                slotProps={{
+                  input: {
+                    startAdornment: (
+                      <InputAdornment position="start">°C</InputAdornment>
+                    )
+                  },
+                  htmlInput: { min: '-20', max: '20', step: '0.1' }
+                }}
+              />
+            </Grid>
+          )}
           {editItem.t === AnalogType.COUNTER && (
             <Grid>
               <TextField
@@ -187,6 +210,19 @@ const SensorsAnalogDialog = ({
               />
             </Grid>
           )}
+          {editItem.t === AnalogType.RGB && (
+            <Grid>
+              <TextField
+                name="o"
+                label={'RGB ' + LL.VALUE(0)}
+                value={numberValue(editItem.o)}
+                type="number"
+                sx={{ width: '11ch' }}
+                variant="outlined"
+                onChange={updateFormValue}
+              />
+            </Grid>
+          )}
           {editItem.t >= AnalogType.COUNTER && editItem.t <= AnalogType.RATE && (
             <Grid>
               <TextField
@@ -314,6 +350,42 @@ const SensorsAnalogDialog = ({
               </Grid>
             </>
           )}
+          {editItem.t === AnalogType.PULSE && (
+            <>
+              <Grid>
+                <TextField
+                  name="o"
+                  label={LL.POLARITY()}
+                  value={editItem.o}
+                  sx={{ width: '11ch' }}
+                  select
+                  onChange={updateFormValue}
+                >
+                  <MenuItem value={0}>{LL.ACTIVEHIGH()}</MenuItem>
+                  <MenuItem value={1}>{LL.ACTIVELOW()}</MenuItem>
+                </TextField>
+              </Grid>
+              <Grid>
+                <TextField
+                  name="f"
+                  label="Pulse"
+                  value={numberValue(editItem.f)}
+                  type="number"
+                  sx={{ width: '15ch' }}
+                  variant="outlined"
+                  onChange={updateFormValue}
+                  slotProps={{
+                    input: {
+                      startAdornment: (
+                        <InputAdornment position="start">s</InputAdornment>
+                      )
+                    },
+                    htmlInput: { min: '0', max: '10000', step: '0.1' }
+                  }}
+                />
+              </Grid>
+            </>
+          )}
         </Grid>
       </DialogContent>
       <DialogActions>

interface/src/app/main/SensorsTemperatureDialog.tsx

@@ -9,7 +9,7 @@ import {
   DialogActions,
   DialogContent,
   DialogTitle,
-  Grid2 as Grid,
+  Grid,
   InputAdornment,
   TextField,
   Typography

interface/src/app/main/types.ts

@@ -188,7 +188,8 @@ export enum DeviceValueUOM {
   VOLTS,
   MBAR,
   LH,
-  CTKWH
+  CTKWH,
+  HZ
 }
 
 export const DeviceValueUOM_s = [
@@ -218,7 +219,8 @@ export const DeviceValueUOM_s = [
   'V',
   'mbar',
   'l/h',
-  'ct/kWh'
+  'ct/kWh',
+  'Hz'
 ];
 
 export enum AnalogType {
@@ -232,20 +234,32 @@ export enum AnalogType {
   DIGITAL_OUT = 6,
   PWM_0 = 7,
   PWM_1 = 8,
-  PWM_2 = 9
+  PWM_2 = 9,
+  NTC = 10,
+  RGB = 11,
+  PULSE = 12,
+  FREQ_0 = 13,
+  FREQ_1 = 14,
+  FREQ_2 = 15
 }
 
 export const AnalogTypeNames = [
   '(disabled)',
   'Digital In',
   'Counter',
-  'ADC',
+  'ADC In',
   'Timer',
   'Rate',
   'Digital Out',
   'PWM 0',
   'PWM 1',
-  'PWM 2'
+  'PWM 2',
+  'NTC Temp.',
+  'RGB Led',
+  'Pulse',
+  'Freq 0',
+  'Freq 1',
+  'Freq 2'
 ];
 
 type BoardProfiles = Record<string, string>;
@@ -255,6 +269,7 @@ export const BOARD_PROFILES: BoardProfiles = {
   S32S3: 'BBQKees Gateway S3',
   E32: 'BBQKees Gateway E32',
   E32V2: 'BBQKees Gateway E32 V2',
+  E32V2_2: 'BBQKees Gateway E32 V2.2',
   NODEMCU: 'NodeMCU 32S',
   'MH-ET': 'MH-ET Live D1 Mini',
   LOLIN: 'Lolin D32',
@@ -380,6 +395,7 @@ export interface EntityItem {
   value_type: number;
   value?: unknown;
   writeable: boolean;
+  hide: boolean;
   deleted?: boolean;
   o_id?: number;
   o_ram?: number;
@@ -393,6 +409,7 @@ export interface EntityItem {
   o_deleted?: boolean;
   o_writeable?: boolean;
   o_value?: unknown;
+  o_hide?: boolean;
 }
 
 export interface Entities {

interface/src/app/settings/ApplicationSettings.tsx

@@ -9,7 +9,7 @@ import {
   Button,
   Checkbox,
   Divider,
-  Grid2 as Grid,
+  Grid,
   InputAdornment,
   MenuItem,
   TextField,
@@ -554,7 +554,7 @@ const ApplicationSettings = () => {
                 <Grid>
                   <TextField
                     name="led_type"
-                    label={'LED ' + LL.TYPE()}
+                    label={'LED ' + LL.TYPE(0)}
                     value={data.led_type}
                     fullWidth
                     variant="outlined"

interface/src/app/settings/DownloadUpload.tsx

@@ -2,7 +2,7 @@ import { useState } from 'react';
 import { toast } from 'react-toastify';
 
 import DownloadIcon from '@mui/icons-material/GetApp';
-import { Box, Button, Grid2 as Grid, Typography } from '@mui/material';
+import { Box, Button, Grid, Typography } from '@mui/material';
 
 import * as SystemApi from 'api/system';
 import { API, callAction } from 'api/app';
@@ -35,7 +35,7 @@ const DownloadUpload = () => {
       toast.info(LL.DOWNLOAD_SUCCESSFUL());
     })
     .onError((error) => {
-      toast.error(error.message);
+      toast.error(String(error.error?.message || 'An error occurred'));
     });
 
   const { send: sendAPI } = useRequest((data: APIcall) => API(data), {

interface/src/app/settings/MqttSettings.tsx

@@ -5,7 +5,7 @@ import WarningIcon from '@mui/icons-material/Warning';
 import {
   Button,
   Checkbox,
-  Grid2 as Grid,
+  Grid,
   InputAdornment,
   MenuItem,
   TextField,
@@ -254,102 +254,100 @@ const MqttSettings = () => {
           }
           label={LL.MQTT_RESPONSE()}
         />
-        {!data.ha_enabled && (
-          <Grid container spacing={2} rowSpacing={0}>
+        <Grid container spacing={2} rowSpacing={0}>
+          <Grid>
+            <BlockFormControlLabel
+              control={
+                <Checkbox
+                  name="publish_single"
+                  checked={data.publish_single}
+                  onChange={updateFormValue}
+                  disabled={data.ha_enabled}
+                />
+              }
+              label={LL.MQTT_PUBLISH_TEXT_1()}
+            />
+          </Grid>
+          {data.publish_single && (
             <Grid>
               <BlockFormControlLabel
                 control={
                   <Checkbox
-                    name="publish_single"
-                    checked={data.publish_single}
+                    name="publish_single2cmd"
+                    checked={data.publish_single2cmd}
                     onChange={updateFormValue}
                   />
                 }
-                label={LL.MQTT_PUBLISH_TEXT_1()}
+                label={LL.MQTT_PUBLISH_TEXT_2()}
               />
             </Grid>
-            {data.publish_single && (
+          )}
+        </Grid>
+        <Grid container spacing={2} rowSpacing={0}>
+          <Grid>
+            <BlockFormControlLabel
+              control={
+                <Checkbox
+                  name="ha_enabled"
+                  checked={data.ha_enabled}
+                  onChange={updateFormValue}
+                  disabled={data.publish_single}
+                />
+              }
+              label={LL.MQTT_PUBLISH_TEXT_3()}
+            />
+          </Grid>
+          {data.ha_enabled && (
+            <Grid container spacing={2} rowSpacing={0}>
               <Grid>
-                <BlockFormControlLabel
-                  control={
-                    <Checkbox
-                      name="publish_single2cmd"
-                      checked={data.publish_single2cmd}
-                      onChange={updateFormValue}
-                    />
-                  }
-                  label={LL.MQTT_PUBLISH_TEXT_2()}
+                <TextField
+                  name="discovery_type"
+                  label={LL.MQTT_PUBLISH_TEXT_5()}
+                  value={data.discovery_type}
+                  variant="outlined"
+                  onChange={updateFormValue}
+                  margin="normal"
+                  select
+                >
+                  <MenuItem value={0}>Home Assistant</MenuItem>
+                  <MenuItem value={1}>Domoticz</MenuItem>
+                  <MenuItem value={2}>Domoticz (latest)</MenuItem>
+                </TextField>
+              </Grid>
+              <Grid>
+                <TextField
+                  name="discovery_prefix"
+                  label={LL.MQTT_PUBLISH_TEXT_4()}
+                  variant="outlined"
+                  value={data.discovery_prefix}
+                  onChange={updateFormValue}
+                  margin="normal"
                 />
               </Grid>
-            )}
-          </Grid>
-        )}
-        {!data.publish_single && (
-          <Grid container spacing={2} rowSpacing={0}>
-            <Grid>
-              <BlockFormControlLabel
-                control={
-                  <Checkbox
-                    name="ha_enabled"
-                    checked={data.ha_enabled}
-                    onChange={updateFormValue}
-                  />
-                }
-                label={LL.MQTT_PUBLISH_TEXT_3()}
-              />
-            </Grid>
-            {data.ha_enabled && (
-              <Grid container spacing={2} rowSpacing={0}>
-                <Grid>
-                  <TextField
-                    name="discovery_type"
-                    label={LL.MQTT_PUBLISH_TEXT_5()}
-                    value={data.discovery_type}
-                    variant="outlined"
-                    onChange={updateFormValue}
-                    margin="normal"
-                    select
-                  >
-                    <MenuItem value={0}>Home Assistant</MenuItem>
-                    <MenuItem value={1}>Domoticz</MenuItem>
-                    <MenuItem value={2}>Domoticz (latest)</MenuItem>
-                  </TextField>
-                </Grid>
-                <Grid>
-                  <TextField
-                    name="discovery_prefix"
-                    label={LL.MQTT_PUBLISH_TEXT_4()}
-                    variant="outlined"
-                    value={data.discovery_prefix}
-                    onChange={updateFormValue}
-                    margin="normal"
-                  />
-                </Grid>
-                <Grid>
-                  <TextField
-                    name="entity_format"
-                    label={LL.MQTT_ENTITY_FORMAT()}
-                    value={data.entity_format}
-                    variant="outlined"
-                    onChange={updateFormValue}
-                    margin="normal"
-                    select
-                  >
-                    <MenuItem value={0}>{LL.MQTT_ENTITY_FORMAT_0()}</MenuItem>
-                    <MenuItem value={3}>
-                      {LL.MQTT_ENTITY_FORMAT_1()}&nbsp;(v3.6)
-                    </MenuItem>
-                    <MenuItem value={4}>
-                      {LL.MQTT_ENTITY_FORMAT_2()}&nbsp;(v3.6)
-                    </MenuItem>
-                    <MenuItem value={1}>{LL.MQTT_ENTITY_FORMAT_1()}</MenuItem>
-                    <MenuItem value={2}>{LL.MQTT_ENTITY_FORMAT_2()}</MenuItem>
-                  </TextField>
-                </Grid>
+              <Grid>
+                <TextField
+                  name="entity_format"
+                  label={LL.MQTT_ENTITY_FORMAT()}
+                  value={data.entity_format}
+                  variant="outlined"
+                  onChange={updateFormValue}
+                  margin="normal"
+                  select
+                >
+                  <MenuItem value={0}>{LL.MQTT_ENTITY_FORMAT_0()}</MenuItem>
+                  <MenuItem value={3}>
+                    {LL.MQTT_ENTITY_FORMAT_1()}&nbsp;(v3.6)
+                  </MenuItem>
+                  <MenuItem value={4}>
+                    {LL.MQTT_ENTITY_FORMAT_2()}&nbsp;(v3.6)
+                  </MenuItem>
+                  <MenuItem value={1}>{LL.MQTT_ENTITY_FORMAT_1()}</MenuItem>
+                  <MenuItem value={2}>{LL.MQTT_ENTITY_FORMAT_2()}</MenuItem>
+                </TextField>
               </Grid>
-            )}
-          </Grid>
-        )}
+            </Grid>
+          )}
+        </Grid>
         <Typography sx={{ pt: 2 }} variant="h6" color="primary">
           {LL.MQTT_PUBLISH_INTERVALS()}&nbsp;(0=auto)
         </Typography>
@@ -442,7 +440,7 @@ const MqttSettings = () => {
           <Grid>
             <TextField
               name="publish_time_sensor"
-              label={LL.TEMP_SENSORS()}
+              label={LL.SENSORS()}
               variant="outlined"
               value={numberValue(data.publish_time_sensor)}
               type="number"

interface/src/app/settings/NTPSettings.tsx

@@ -1,12 +1,27 @@
 import { useState } from 'react';
+import { toast } from 'react-toastify';
 
+import AccessTimeIcon from '@mui/icons-material/AccessTime';
 import CancelIcon from '@mui/icons-material/Cancel';
 import WarningIcon from '@mui/icons-material/Warning';
-import { Button, Checkbox, MenuItem } from '@mui/material';
+import {
+  Box,
+  Button,
+  Checkbox,
+  Dialog,
+  DialogActions,
+  DialogContent,
+  DialogTitle,
+  MenuItem,
+  TextField,
+  Typography
+} from '@mui/material';
 
 import * as NTPApi from 'api/ntp';
 import { readNTPSettings } from 'api/ntp';
 
+import { dialogStyle } from 'CustomTheme';
+import { useRequest } from 'alova/client';
 import { updateState } from 'alova/client';
 import type { ValidateFieldsError } from 'async-validator';
 import {
@@ -19,8 +34,8 @@ import {
   useLayoutTitle
 } from 'components';
 import { useI18nContext } from 'i18n/i18n-react';
-import type { NTPSettingsType } from 'types';
-import { updateValueDirty, useRest } from 'utils';
+import type { NTPSettingsType, Time } from 'types';
+import { formatLocalDateTime, updateValueDirty, useRest } from 'utils';
 import { validate } from 'validators';
 import { NTP_SETTINGS_VALIDATOR } from 'validators/ntp';
 
@@ -46,6 +61,17 @@ const NTPSettings = () => {
   const { LL } = useI18nContext();
   useLayoutTitle('NTP');
 
+  const [localTime, setLocalTime] = useState<string>('');
+  const [settingTime, setSettingTime] = useState<boolean>(false);
+  const [processing, setProcessing] = useState<boolean>(false);
+
+  const { send: updateTime } = useRequest(
+    (local_time: Time) => NTPApi.updateTime(local_time),
+    {
+      immediate: false
+    }
+  );
+
   const updateFormValue = updateValueDirty(
     origData,
     dirtyFlags,
@@ -55,6 +81,78 @@ const NTPSettings = () => {
 
   const [fieldErrors, setFieldErrors] = useState<ValidateFieldsError>();
 
+  const updateLocalTime = (event: React.ChangeEvent<HTMLInputElement>) =>
+    setLocalTime(event.target.value);
+
+  const openSetTime = () => {
+    setLocalTime(formatLocalDateTime(new Date()));
+    setSettingTime(true);
+  };
+
+  const configureTime = async () => {
+    setProcessing(true);
+
+    await updateTime({ local_time: formatLocalDateTime(new Date(localTime)) })
+      .then(async () => {
+        toast.success(LL.TIME_SET());
+        setSettingTime(false);
+        await loadData();
+      })
+      .catch(() => {
+        toast.error(LL.PROBLEM_UPDATING());
+      })
+      .finally(() => {
+        setProcessing(false);
+      });
+  };
+
+  const renderSetTimeDialog = () => (
+    <Dialog
+      sx={dialogStyle}
+      open={settingTime}
+      onClose={() => setSettingTime(false)}
+    >
+      <DialogTitle>{LL.SET_TIME(1)}</DialogTitle>
+      <DialogContent dividers>
+        <Box color="warning.main" p={0} pl={0} pr={0} mt={0} mb={2}>
+          <Typography variant="body2">{LL.SET_TIME_TEXT()}</Typography>
+        </Box>
+        <TextField
+          label={LL.LOCAL_TIME(0)}
+          type="datetime-local"
+          value={localTime}
+          onChange={updateLocalTime}
+          disabled={processing}
+          fullWidth
+          slotProps={{
+            inputLabel: {
+              shrink: true
+            }
+          }}
+        />
+      </DialogContent>
+      <DialogActions>
+        <Button
+          startIcon={<CancelIcon />}
+          variant="outlined"
+          onClick={() => setSettingTime(false)}
+          color="secondary"
+        >
+          {LL.CANCEL()}
+        </Button>
+        <Button
+          startIcon={<AccessTimeIcon />}
+          variant="outlined"
+          onClick={configureTime}
+          disabled={processing}
+          color="primary"
+        >
+          {LL.UPDATE()}
+        </Button>
+      </DialogActions>
+    </Dialog>
+  );
+
   const content = () => {
     if (!data) {
       return <FormLoader onRetry={loadData} errorMessage={errorMessage} />;
@@ -115,6 +213,25 @@ const NTPSettings = () => {
           <MenuItem disabled>{LL.TIME_ZONE()}...</MenuItem>
           {timeZoneSelectItems()}
         </ValidatedTextField>
+
+        <Box display="flex" flexWrap="wrap">
+          {!data.enabled && !dirtyFlags.length && (
+            <Box flexWrap="nowrap" whiteSpace="nowrap">
+              <ButtonRow>
+                <Button
+                  onClick={openSetTime}
+                  variant="outlined"
+                  color="primary"
+                  startIcon={<AccessTimeIcon />}
+                >
+                  {LL.SET_TIME(0)}
+                </Button>
+              </ButtonRow>
+            </Box>
+          )}
+        </Box>
+        {renderSetTimeDialog()}
+
         {dirtyFlags && dirtyFlags.length !== 0 && (
           <ButtonRow>
             <Button

interface/src/app/status/NTPStatus.tsx

@@ -1,40 +1,27 @@
-import { useState } from 'react';
-import { toast } from 'react-toastify';
-
 import AccessTimeIcon from '@mui/icons-material/AccessTime';
-import CancelIcon from '@mui/icons-material/Cancel';
 import DnsIcon from '@mui/icons-material/Dns';
 import SwapVerticalCircleIcon from '@mui/icons-material/SwapVerticalCircle';
 import UpdateIcon from '@mui/icons-material/Update';
 import {
   Avatar,
-  Box,
-  Button,
-  Dialog,
-  DialogActions,
-  DialogContent,
-  DialogTitle,
   Divider,
   List,
   ListItem,
   ListItemAvatar,
   ListItemText,
-  TextField,
-  Typography,
   useTheme
 } from '@mui/material';
 import type { Theme } from '@mui/material';
 
 import * as NTPApi from 'api/ntp';
 
-import { dialogStyle } from 'CustomTheme';
 import { useRequest } from 'alova/client';
-import { ButtonRow, FormLoader, SectionContent, useLayoutTitle } from 'components';
+import { FormLoader, SectionContent, useLayoutTitle } from 'components';
 import { useI18nContext } from 'i18n/i18n-react';
-import type { NTPStatusType, Time } from 'types';
+import type { NTPStatusType } from 'types';
 import { NTPSyncStatus } from 'types';
 import { useInterval } from 'utils';
-import { formatDateTime, formatLocalDateTime } from 'utils';
+import { formatDateTime } from 'utils';
 
 const NTPStatus = () => {
   const { data, send: loadData, error } = useRequest(NTPApi.readNTPStatus);
@@ -43,24 +30,11 @@ const NTPStatus = () => {
     void loadData();
   });
 
-  const [localTime, setLocalTime] = useState<string>('');
-  const [settingTime, setSettingTime] = useState<boolean>(false);
-  const [processing, setProcessing] = useState<boolean>(false);
-
   const { LL } = useI18nContext();
   useLayoutTitle('NTP');
 
-  const { send: updateTime } = useRequest(
-    (local_time: Time) => NTPApi.updateTime(local_time),
-    {
-      immediate: false
-    }
-  );
-
   NTPApi.updateTime;
 
-  const isNtpActive = ({ status }: NTPStatusType) =>
-    status === NTPSyncStatus.NTP_ACTIVE;
   const isNtpEnabled = ({ status }: NTPStatusType) =>
     status !== NTPSyncStatus.NTP_DISABLED;
 
@@ -77,14 +51,6 @@ const NTPStatus = () => {
     }
   };
 
-  const updateLocalTime = (event: React.ChangeEvent<HTMLInputElement>) =>
-    setLocalTime(event.target.value);
-
-  const openSetTime = () => {
-    setLocalTime(formatLocalDateTime(new Date()));
-    setSettingTime(true);
-  };
-
   const theme = useTheme();
 
   const ntpStatus = ({ status }: NTPStatusType) => {
@@ -100,70 +66,6 @@ const NTPStatus = () => {
     }
   };
 
-  const configureTime = async () => {
-    setProcessing(true);
-
-    await updateTime({ local_time: formatLocalDateTime(new Date(localTime)) })
-      .then(async () => {
-        toast.success(LL.TIME_SET());
-        setSettingTime(false);
-        await loadData();
-      })
-      .catch(() => {
-        toast.error(LL.PROBLEM_UPDATING());
-      })
-      .finally(() => {
-        setProcessing(false);
-      });
-  };
-
-  const renderSetTimeDialog = () => (
-    <Dialog
-      sx={dialogStyle}
-      open={settingTime}
-      onClose={() => setSettingTime(false)}
-    >
-      <DialogTitle>{LL.SET_TIME(1)}</DialogTitle>
-      <DialogContent dividers>
-        <Box color="warning.main" p={0} pl={0} pr={0} mt={0} mb={2}>
-          <Typography variant="body2">{LL.SET_TIME_TEXT()}</Typography>
-        </Box>
-        <TextField
-          label={LL.LOCAL_TIME(0)}
-          type="datetime-local"
-          value={localTime}
-          onChange={updateLocalTime}
-          disabled={processing}
-          fullWidth
-          slotProps={{
-            inputLabel: {
-              shrink: true
-            }
-          }}
-        />
-      </DialogContent>
-      <DialogActions>
-        <Button
-          startIcon={<CancelIcon />}
-          variant="outlined"
-          onClick={() => setSettingTime(false)}
-          color="secondary"
-        >
-          {LL.CANCEL()}
-        </Button>
-        <Button
-          startIcon={<AccessTimeIcon />}
-          variant="outlined"
-          onClick={configureTime}
-          disabled={processing}
-          color="primary"
-        >
-          {LL.UPDATE()}
-        </Button>
-      </DialogActions>
-    </Dialog>
-  );
-
   const content = () => {
     if (!data) {
       return <FormLoader onRetry={loadData} errorMessage={error?.message} />;
@@ -219,23 +121,6 @@ const NTPStatus = () => {
           </ListItem>
           <Divider variant="inset" component="li" />
         </List>
-        <Box display="flex" flexWrap="wrap">
-          {data && !isNtpActive(data) && (
-            <Box flexWrap="nowrap" whiteSpace="nowrap">
-              <ButtonRow>
-                <Button
-                  onClick={openSetTime}
-                  variant="outlined"
-                  color="primary"
-                  startIcon={<AccessTimeIcon />}
-                >
-                  {LL.SET_TIME(0)}
-                </Button>
-              </ButtonRow>
-            </Box>
-          )}
-        </Box>
-        {renderSetTimeDialog()}
       </>
     );
   };

interface/src/app/status/SystemLog.tsx

@@ -8,7 +8,7 @@ import {
   Box,
   Button,
   Checkbox,
-  Grid2 as Grid,
+  Grid,
   IconButton,
   MenuItem,
   TextField,

interface/src/app/status/SystemMonitor.tsx

@@ -51,7 +51,7 @@ const SystemMonitor = () => {
       }
     })
     .onError((error) => {
-      setErrorMessage(error.message);
+      setErrorMessage(String(error.error?.message || 'An error occurred'));
     });
 
   useInterval(() => {
@@ -97,7 +97,7 @@ const SystemMonitor = () => {
                 color="error"
                 onClick={onCancel}
               >
-                {LL.RESET(0)}
+                {LL.RESTART()}
               </Button>
             </MessageBox>
           ) : (

interface/src/app/status/Version.tsx

@@ -2,9 +2,9 @@ import { useContext, useEffect, useState } from 'react';
 import { toast } from 'react-toastify';
 
 import CancelIcon from '@mui/icons-material/Cancel';
+import CloseIcon from '@mui/icons-material/Close';
 import CheckIcon from '@mui/icons-material/Done';
 import DownloadIcon from '@mui/icons-material/GetApp';
-import InfoOutlinedIcon from '@mui/icons-material/InfoOutlined';
 import WarningIcon from '@mui/icons-material/Warning';
 import {
   Box,
@@ -15,7 +15,7 @@ import {
   DialogContent,
   DialogTitle,
   FormControlLabel,
-  Grid2 as Grid,
+  Grid,
   Link,
   Typography
 } from '@mui/material';
@@ -44,7 +44,10 @@ const Version = () => {
   const [restarting, setRestarting] = useState<boolean>(false);
   const [openInstallDialog, setOpenInstallDialog] = useState<boolean>(false);
   const [usingDevVersion, setUsingDevVersion] = useState<boolean>(false);
-  const [upgradeAvailable, setUpgradeAvailable] = useState<boolean>(false);
+  const [fetchDevVersion, setFetchDevVersion] = useState<boolean>(false);
+  const [devUpgradeAvailable, setDevUpgradeAvailable] = useState<boolean>(false);
+  const [stableUpgradeAvailable, setStableUpgradeAvailable] =
+    useState<boolean>(false);
   const [internetLive, setInternetLive] = useState<boolean>(false);
   const [downloadOnly, setDownloadOnly] = useState<boolean>(false);
 
@@ -62,8 +65,13 @@ const Version = () => {
       immediate: false
     }
   ).onSuccess((event) => {
-    const data = event.data as { emsesp_version: string; upgradeable: boolean };
-    setUpgradeAvailable(data.upgradeable);
+    const data = event.data as {
+      emsesp_version: string;
+      dev_upgradeable: boolean;
+      stable_upgradeable: boolean;
+    };
+    setDevUpgradeAvailable(data.dev_upgradeable);
+    setStableUpgradeAvailable(data.stable_upgradeable);
   });
 
   const {
@@ -71,7 +79,7 @@ const Version = () => {
     send: loadData,
     error
   } = useRequest(SystemApi.readSystemStatus).onSuccess((event) => {
-    // older version of EMS-ESP on 4MB boards, can't use OTA because of SSL support in HttpClient
+    // older version of EMS-ESP using ESP32 (not S3) and no PSRAM, can't use OTA because of SSL support in HttpClient
     if (event.data.arduino_version.startsWith('Tasmota')) {
       setDownloadOnly(true);
     }
@@ -138,20 +146,21 @@ const Version = () => {
     );
   };
 
-  const getBinURL = () => {
+  const getBinURL = (showingDev: boolean) => {
     if (!internetLive) {
       return '';
     }
+
     const filename =
       'EMS-ESP-' +
-      (usingDevVersion ? latestDevVersion.name : latestVersion.name).replaceAll(
+      (showingDev ? latestDevVersion.name : latestVersion.name).replaceAll(
         '.',
         '_'
       ) +
       '-' +
       getPlatform() +
       '.bin';
-    return usingDevVersion
+    return showingDev
       ? DEV_URL + filename
       : STABLE_URL + 'v' + latestVersion.name + '/' + filename;
   };
@@ -172,100 +181,112 @@ const Version = () => {
 
   useLayoutTitle('EMS-ESP Firmware');
 
-  const renderInstallDialog = () => (
-    <Dialog
-      sx={dialogStyle}
-      open={openInstallDialog}
-      onClose={() => closeInstallDialog()}
-    >
-      <DialogTitle>
-        {LL.INSTALL() +
-          ' ' +
-          (usingDevVersion ? LL.DEVELOPMENT() : LL.STABLE()) +
-          ' Firmware'}
-      </DialogTitle>
-      <DialogContent dividers>
-        <Typography mb={2}>
-          {LL.INSTALL_VERSION(
-            usingDevVersion ? latestDevVersion?.name : latestVersion?.name
-          )}
-        </Typography>
-      </DialogContent>
-      <DialogActions>
-        <Button
-          startIcon={<CancelIcon />}
-          variant="outlined"
-          onClick={() => closeInstallDialog()}
-          color="secondary"
-        >
-          {LL.CANCEL()}
-        </Button>
-        <Button
-          startIcon={<DownloadIcon />}
-          variant="outlined"
-          onClick={() => closeInstallDialog()}
-          color="primary"
-        >
-          <Link underline="none" target="_blank" href={getBinURL()} color="primary">
-            {LL.DOWNLOAD(1)}
-          </Link>
-        </Button>
-        <Button
-          startIcon={<WarningIcon color="warning" />}
-          variant="outlined"
-          onClick={() => installFirmwareURL(getBinURL())}
-          color="primary"
-        >
-          {LL.INSTALL()}
-        </Button>
-      </DialogActions>
-    </Dialog>
-  );
+  const renderInstallDialog = () => {
+    const binURL = getBinURL(fetchDevVersion);
 
-  const showFirmwareDialog = (useDevVersion?: boolean) => {
-    setUsingDevVersion(useDevVersion || usingDevVersion);
+    return (
+      <Dialog
+        sx={dialogStyle}
+        open={openInstallDialog}
+        onClose={() => closeInstallDialog()}
+      >
+        <DialogTitle>
+          {LL.UPDATE() +
+            ' ' +
+            (fetchDevVersion ? LL.DEVELOPMENT() : LL.STABLE()) +
+            ' Firmware'}
+        </DialogTitle>
+        <DialogContent dividers>
+          <Typography mb={2}>
+            {LL.INSTALL_VERSION(
+              downloadOnly ? LL.DOWNLOAD(1) : LL.INSTALL(),
+              fetchDevVersion ? latestDevVersion?.name : latestVersion?.name
+            )}
+          </Typography>
+        </DialogContent>
+        <DialogActions>
+          <Button
+            startIcon={<CancelIcon />}
+            variant="outlined"
+            onClick={() => closeInstallDialog()}
+            color="secondary"
+          >
+            {LL.CANCEL()}
+          </Button>
+          <Button
+            startIcon={<DownloadIcon />}
+            variant="outlined"
+            onClick={() => closeInstallDialog()}
+            color="primary"
+          >
+            <Link underline="none" target="_blank" href={binURL} color="primary">
+              {LL.DOWNLOAD(0)}
+            </Link>
+          </Button>
+          {!downloadOnly && (
+            <Button
+              startIcon={<WarningIcon color="warning" />}
+              variant="outlined"
+              onClick={() => installFirmwareURL(binURL)}
+              color="primary"
+            >
+              {LL.INSTALL()}
+            </Button>
+          )}
+        </DialogActions>
+      </Dialog>
+    );
+  };
+
+  const showFirmwareDialog = (useDevVersion: boolean) => {
+    setFetchDevVersion(useDevVersion);
     setOpenInstallDialog(true);
   };
 
   const closeInstallDialog = () => {
     setOpenInstallDialog(false);
-    setUsingDevVersion(data.emsesp_version.includes('dev'));
   };
 
-  const showButtons = (showDev?: boolean) => {
-    if (!me.admin) {
-      return;
+  const showButtons = (showingDev: boolean) => {
+    const choice = showingDev
+      ? !usingDevVersion
+        ? LL.SWITCH_RELEASE_TYPE(LL.DEVELOPMENT())
+        : devUpgradeAvailable
+          ? LL.UPDATE_AVAILABLE()
+          : undefined
+      : usingDevVersion
+        ? LL.SWITCH_RELEASE_TYPE(LL.STABLE())
+        : stableUpgradeAvailable
+          ? LL.UPDATE_AVAILABLE()
+          : undefined;
+
+    if (!choice) {
+      return (
+        <>
+          <CheckIcon
+            color="success"
+            sx={{ verticalAlign: 'middle', ml: 0.5, mr: 0.5 }}
+          />
+          <span style={{ color: '#66bb6a', fontSize: '0.8em' }}>
+            {LL.LATEST_VERSION(usingDevVersion ? LL.DEVELOPMENT() : LL.STABLE())}
+          </span>
+        </>
+      );
     }
 
-    if (downloadOnly) {
-      return (
-        <Button
-          sx={{ ml: 2 }}
-          startIcon={<DownloadIcon />}
-          variant="outlined"
-          onClick={() => setOpenInstallDialog(false)}
-          color="warning"
-          size="small"
-        >
-          <Link underline="none" target="_blank" href={getBinURL()} color="warning">
-            {LL.DOWNLOAD(1)}
-          </Link>
-        </Button>
-      );
+    if (!me.admin) {
+      return;
     }
 
     return (
       <Button
         sx={{ ml: 2 }}
         variant="outlined"
-        color="warning"
+        color={choice === LL.UPDATE_AVAILABLE() ? 'success' : 'warning'}
         size="small"
-        onClick={() => showFirmwareDialog()}
+        onClick={() => showFirmwareDialog(showingDev)}
       >
-        {upgradeAvailable || (!usingDevVersion && showDev)
-          ? LL.UPGRADE()
-          : LL.REINSTALL()}
-        &hellip;
+        {choice}
       </Button>
     );
   };
@@ -314,7 +335,25 @@ const Version = () => {
               <Typography>
                 {getPlatform()}
                 <Typography variant="caption">
-                  &nbsp; &#40;{data.psram ? '+PSRAM' : '-PSRAM'}&#41;
+                  &nbsp; &#40;
+                  {data.psram ? (
+                    <CheckIcon
+                      color="success"
+                      sx={{
+                        fontSize: '1.5em',
+                        verticalAlign: 'middle'
+                      }}
+                    />
+                  ) : (
+                    <CloseIcon
+                      color="error"
+                      sx={{
+                        fontSize: '1.5em',
+                        verticalAlign: 'middle'
+                      }}
+                    />
+                  )}
+                  PSRAM&#41;
                 </Typography>
               </Typography>
             </Grid>
@@ -395,7 +434,7 @@ const Version = () => {
                         {formatTimeAgo(new Date(latestVersion.published_at))})
                       </Typography>
                     )}
-                    {!usingDevVersion && showButtons(false)}
+                    {showButtons(false)}
                   </Typography>
                 </Grid>
 
@@ -417,24 +456,6 @@ const Version = () => {
                   </Typography>
                 </Grid>
               </Grid>
-
-              {upgradeAvailable ? (
-                <Typography mt={2} color="warning">
-                  <InfoOutlinedIcon
-                    color="warning"
-                    sx={{ verticalAlign: 'middle', mr: 2 }}
-                  />
-                  {LL.UPGRADE_AVAILABLE()}
-                </Typography>
-              ) : (
-                <Typography mt={2} color="success">
-                  <CheckIcon
-                    color="success"
-                    sx={{ verticalAlign: 'middle', mr: 2 }}
-                  />
-                  {LL.LATEST_VERSION()}
-                </Typography>
-              )}
             </>
           ) : (
             <Typography mt={2} color="warning">

interface/src/components/routing/authentication.ts

@@ -20,8 +20,8 @@ export function getStorage() {
 
 export function storeLoginRedirect(location?: H.Location) {
   if (location) {
-    getStorage().setItem(SIGN_IN_PATHNAME, location.pathname);
-    getStorage().setItem(SIGN_IN_SEARCH, location.search);
+    getStorage().setItem(SIGN_IN_PATHNAME, location.pathname as string);
+    getStorage().setItem(SIGN_IN_SEARCH, location.search as string);
   }
 }
 

interface/src/i18n/cz/index.ts

@@ -187,7 +187,7 @@ const cz: Translation = {
   COMPACT: 'Kompaktní',
   DOWNLOAD_SETTINGS_TEXT: 'Vytvořte zálohu svého nastavení a konfigurace',
   UPLOAD_TEXT: 'Nahrajte nový soubor firmwaru (.bin) nebo záložní soubor (.json)',
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here', // TODO translate
+  UPLOAD_DROP_TEXT: 'Přetáhněte soubor sem nebo klikněte pro výběr',
   ERROR: 'Neočekávaná chyba, zkuste to prosím znovu',
   TIME_SET: 'Čas nastaven',
   MANAGE_USERS: 'Spravovat uživatele',
@@ -331,28 +331,27 @@ const cz: Translation = {
   ALLVALUES: 'Všechny hodnoty',
   SPECIAL_FUNCTIONS: 'Speciální funkce',
   WAIT_FIRMWARE: 'Firmware se nahrává a instaluje',
-  INSTALL_VERSION: 'Tímto se instalovat verze {0}. Jste si jistí?',
-  UPGRADE_AVAILABLE: 'Je k dispozici aktualizace firmwaru!',
-  LATEST_VERSION: 'Používáte nejnovější verzi firmwaru',
+  INSTALL_VERSION: 'Tímto se {0} verze {1}. Jste si jistí?',
+  UPDATE_AVAILABLE: 'aktualizace dostupná',
+  LATEST_VERSION: 'Používáte nejnovější verzi {0}firmwaru',
   PLEASE_WAIT: 'Prosím čekejte',
   RESTARTING_PRE: 'Inicializace',
   RESTARTING_POST: 'Příprava',
   AUTO_SCROLL: 'Automatické rolování',
   DASHBOARD: 'Dashboard',
   DEVELOPER_MODE: 'Režim vývojáře',
-  BYTES: 'Bytes', // TODO translate
-  BITMASK: 'Bit Mask',// TODO translate
+  BYTES: 'Bajty',
+  BITMASK: 'Bit Mask',
   DUPLICATE: 'Duplikát',
-  UPGRADE: 'Upgrade',
   DASHBOARD_1: 'Všechny aktivní entity EMS jsou označené jako oblíbené. Všechny vlastní entity, harmonogramy a externí sensory jsou zobrazeny níže.',
-  NO_DATA_1: 'Nebyly nalezeny žádné oblíbené entity. Použijte',
-  NO_DATA_2: 'modul sloužící k jejich výběru.',
-  NO_DATA_3: 'Pro zobrazení všech dostupných entit navštivte',
+  NO_DATA_1: 'Nebyly nalezeny žádné oblíbené entity. Použijte modul',
+  NO_DATA_2: 'pro jejich výběr.',
+  NO_DATA_3: 'Pro zobrazení všech dostupných entit navštivte stránku',
   THIS_VERSION: 'Tato verze',
   PLATFORM: 'Platforma',
   RELEASE_TYPE: 'Typ sestavení',
-  REINSTALL: 'Přeinstalovat',
   INTERNET_CONNECTION_REQUIRED: 'Pro automatickou kontrolu a instalaci aktualizací je třeba internetové připojení',
+  SWITCH_RELEASE_TYPE: 'Přepnout na {0} verzi'
 };
 
 export default cz;

interface/src/i18n/de/index.ts

@@ -42,7 +42,7 @@ const de: Translation = {
   CANCEL: 'Abbrechen',
   RESET: 'Zurücksetzen',
   APPLY_CHANGES: 'Änderungen anwenden ({0})',
-  UPDATE: 'Update',
+  UPDATE: 'Aktualisieren',
   EXECUTE: 'Ausführen',
   REMOVE: 'Entfernen',
   PROBLEM_UPDATING: 'Problem beim Aktualisieren',
@@ -160,7 +160,7 @@ const de: Translation = {
   HELP_INFORMATION_3: 'Um neue Funktionen anzufragen oder Fehler zu melden, eröffnen Sie ein Issue auf GitHub',
   HELP_INFORMATION_4: 'Bitte laden Sie die Systemdetails und hängen Sie sie an das Support-Issue an',
   UPLOAD: 'Hochladen',
-  DOWNLOAD: '{{H|h|h}}erunterladen',
+  DOWNLOAD: '{{Herunterladen|heruntergeladen|}}',
   INSTALL: 'Installieren',
   ABORTED: 'abgebrochen',
   FAILED: 'gescheitert',
@@ -331,9 +331,9 @@ const de: Translation = {
   ALLVALUES: 'Alle Werte',
   SPECIAL_FUNCTIONS: 'Sonderfunktionen',
   WAIT_FIRMWARE: 'Die Firmware wird hochgeladen und installiert.',
-  INSTALL_VERSION: 'Dadurch wird die Version {0} heruntergeladen. Sind Sie sicher?',
-  UPGRADE_AVAILABLE: 'Es ist ein Firmware-Upgrade verfügbar.',
-  LATEST_VERSION: 'Sie verwenden die neueste Firmware-Version',
+  INSTALL_VERSION: 'Dadurch wird die Version {1} {0}. Sind Sie sicher?',
+  UPDATE_AVAILABLE: 'Firmware-Update verfügbar',
+  LATEST_VERSION: 'Sie verwenden die neueste {0} Firmware-Version',
   PLEASE_WAIT: 'Bitte warten',
   RESTARTING_PRE: 'Initialisierung',
   RESTARTING_POST: 'Vorbereitung',
@@ -343,7 +343,6 @@ const de: Translation = {
   BYTES: 'Bytes',
   BITMASK: 'Bit Maske',
   DUPLICATE: 'Kopieren',
-  UPGRADE: 'Aktualisieren',
   DASHBOARD_1: 'Alle EMS-Entitäten, die aktiv und als Favorit markiert sind, sowie alle benutzerdefinierten Entitäten, Zeitpläne und externen Sensordaten werden unten angezeigt.',
   NO_DATA_1: 'Keine favorisierten EMS-Entitäten gefunden! Verwenden Sie das Modul',
   NO_DATA_2: ', um sie zu markieren.',
@@ -351,8 +350,8 @@ const de: Translation = {
   THIS_VERSION: 'Diese Version',
   PLATFORM: 'Plattform',
   RELEASE_TYPE: 'Release Typ',
-  REINSTALL: 'Neu installieren',
-  INTERNET_CONNECTION_REQUIRED: 'Internetverbindung erforderlich für automatische Version-Überprüfung und -Aktualisierung',
+  INTERNET_CONNECTION_REQUIRED: 'Für die automatische Versionsprüfung und Aktualisierung ist eine Internetverbindung erforderlich',
+  SWITCH_RELEASE_TYPE: 'Zum {0}-Release wechseln'
 };
 
 export default de;

interface/src/i18n/en/index.ts

@@ -331,9 +331,9 @@ const en: Translation = {
   ALLVALUES: 'All Values',
   SPECIAL_FUNCTIONS: 'Special Functions',
   WAIT_FIRMWARE: 'Firmware is uploading and installing',
-  INSTALL_VERSION: 'This will install version {0}. Are you sure?',
-  UPGRADE_AVAILABLE: 'There is a firmware upgrade available!',
-  LATEST_VERSION: 'You are using the latest firmware version',
+  INSTALL_VERSION: 'This will {0} version {1}. Are you sure?',
+  UPDATE_AVAILABLE: 'update available',
+  LATEST_VERSION: 'You are using the latest {0} firmware version',
   PLEASE_WAIT: 'Please wait',
   RESTARTING_PRE: 'Initializing',
   RESTARTING_POST: 'Preparing',
@@ -344,15 +344,14 @@ const en: Translation = {
   BYTES: 'Bytes',
   BITMASK: 'Bit Mask',
   DUPLICATE: 'Duplicate',
-  UPGRADE: 'Upgrade',
   NO_DATA_1: 'No favorite EMS entities found yet. Use the',
   NO_DATA_2: 'module to mark them.',
   NO_DATA_3: 'To see all available entities go to',
   THIS_VERSION: 'This Version',
   PLATFORM: 'Platform',
   RELEASE_TYPE: 'Release Type',
-  REINSTALL: 'Re-install',
   INTERNET_CONNECTION_REQUIRED: 'Internet connection required for automatic version checking and upgrading',
+  SWITCH_RELEASE_TYPE: 'Switch to {0} release'
 };
 
 export default en;

interface/src/i18n/fr/index.ts

@@ -41,9 +41,9 @@ const fr: Translation = {
   CHANGE_VALUE: 'Changer la valeur',
   CANCEL: 'Annuler',
   RESET: 'Réinitialiser',
-  APPLY_CHANGES: 'Apply Changes ({0})', // TODO translate
-  UPDATE: 'Update', // TODO translate
-  EXECUTE: 'Execute', // TODO translate
+  APPLY_CHANGES: 'Appliquer les changements ({0})',
+  UPDATE: 'Update',
+  EXECUTE: 'Execute',
   REMOVE: 'Enlever',
   PROBLEM_UPDATING: 'Problème lors de la mise à jour',
   PROBLEM_LOADING: 'Problème lors du chargement',
@@ -66,13 +66,13 @@ const fr: Translation = {
   TEMP_SENSOR: 'Capteur de température',
   TEMP_SENSORS: 'Capteurs de température',
   WRITE_CMD_SENT: 'Envoyer la commande sent',
-  EMS_BUS_WARNING:  'Bus EMS déconnecté. Si ce message persiste après quelques secondes, vérifiez les paramètres et la configuration de la carte.',
+  EMS_BUS_WARNING: 'Bus EMS déconnecté. Si ce message persiste après quelques secondes, vérifiez les paramètres et la configuration de la carte.',
   EMS_BUS_SCANNING: 'Scan des appareils EMS...',
   CONNECTED: 'Connecté',
   TX_ISSUES: 'Problèmes de transmission (Tx) - Essayez un autre mode Tx',
   DISCONNECTED: 'Déconnecté',
   EMS_SCAN: 'Etes-vous sûr de vouloir lancer un scan complet du bus EMS ?',
-  DATA_TRAFFIC: 'Data Traffic', // TODO translate
+  DATA_TRAFFIC: 'Traffic des données',
   EMS_DEVICE: 'Appareils EMS',
   SUCCESS: 'SUCCÈS',
   FAIL: 'ÉCHEC',
@@ -114,9 +114,9 @@ const fr: Translation = {
   BYPASS_TOKEN: "Contourner l'autorisation du jeton d'accès sur les appels API",
   READONLY: 'Activer le mode lecture uniquement (bloque toutes les commandes EMS sortantes en écriture Tx)',
   UNDERCLOCK_CPU: 'Underclock du CPU',
-  HEATINGOFF: 'Start boiler with forced heating off', // TODO translate
+  HEATINGOFF: 'Démarrer le chauffage avec le chauffage forcé éteint',
   REMOTE_TIMEOUT: 'Remote timeout',
-  REMOTE_TIMEOUT_EN: 'Disable remote on missing room temperature', // TODO translate
+  REMOTE_TIMEOUT_EN: 'Disable remote on missing room temperature',
   MIN_DURATION: 'Wait time',
   ENABLE_SHOWER_TIMER: 'Activer la minuterie de la douche',
   ENABLE_SHOWER_ALERT: 'Activer les alertes de durée de douche',
@@ -148,7 +148,7 @@ const fr: Translation = {
   CUSTOMIZATIONS_HELP_3: "désactiver l'action d'écriture",
   CUSTOMIZATIONS_HELP_4: "exclure de MQTT et de l'API",
   CUSTOMIZATIONS_HELP_5: 'cacher des appareils',
-  CUSTOMIZATIONS_HELP_6: 'remove from memory', // TODO translate
+  CUSTOMIZATIONS_HELP_6: 'supprimer de la mémoire',
   SELECT_DEVICE: 'Sélectionnez un appareil',
   SET_ALL: 'tout régler',
   OPTIONS: 'Options',
@@ -168,14 +168,14 @@ const fr: Translation = {
   SYSTEM: 'Système',
   LOG_OF: '{0} Log',
   STATUS_OF: 'Statut {0}',
-  DOWNLOAD_UPLOAD: 'Download/Upload', // TODO translate
+  DOWNLOAD_UPLOAD: 'Télécharger/Mettre à jour',
   CLOSE: 'Fermer',
   USE: 'Utiliser',
   FACTORY_RESET: 'Réinitialisation',
   SYSTEM_FACTORY_TEXT: "L'appareil a été réinitialisé et va maintenant redémarrer",
   SYSTEM_FACTORY_TEXT_DIALOG: "Êtes-vous sûr de vouloir réinitialiser l'appareil à ses paramètres d'usine ?",
-  AVAILABLE_VERSION: 'Latest Available Versions', // TODO translate
-  STABLE: 'Stable', // TODO translate
+  AVAILABLE_VERSION: 'Versions disponibles',
+  STABLE: 'Stable',
   DEVELOPMENT: 'Développement',
   UPTIME: 'Durée de fonctionnement du système',
   FREE_MEMORY: 'Libre Memory',
@@ -185,9 +185,9 @@ const fr: Translation = {
   FILESYSTEM: 'File System (Utilisée / Libre)',
   BUFFER_SIZE: 'Max taille du buffer',
   COMPACT: 'Compact',
-  DOWNLOAD_SETTINGS_TEXT: 'Create a backup of your configuration and settings', // TODO translate
-  UPLOAD_TEXT: 'Upload a new firmware file (.bin) or a backup file (.json)', // TODO translate
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here', // TODO translate
+  DOWNLOAD_SETTINGS_TEXT: 'Créer une sauvegarde de vos paramètres et configurations',
+  UPLOAD_TEXT: 'Télécharger un nouveau fichier firmware (.bin) ou une sauvegarde (.json)',
+  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here',
   ERROR: 'Erreur inattendue, veuillez réessayer',
   TIME_SET: 'Time set',
   MANAGE_USERS: 'Gérer les utilisateurs',
@@ -217,7 +217,7 @@ const fr: Translation = {
   MQTT_PUBLISH_TEXT_2: 'Publier vers des topics de commande (ioBroker)',
   MQTT_PUBLISH_TEXT_3: 'Activer la découverte MQTT',
   MQTT_PUBLISH_TEXT_4: 'Préfixe pour les topics découverte',
-  MQTT_PUBLISH_TEXT_5: 'Discovery type', // TODO translate
+  MQTT_PUBLISH_TEXT_5: 'Type de découverte',
   MQTT_PUBLISH_INTERVALS: 'Intervalles de publication',
   MQTT_INT_BOILER: 'Chaudières et pompes à chaleur',
   MQTT_INT_THERMOSTATS: 'Thermostats',
@@ -226,10 +226,10 @@ const fr: Translation = {
   MQTT_INT_WATER: 'Modules eau',
   MQTT_QUEUE: 'Queue MQTT',
   DEFAULT: 'Défaut',
-  MQTT_ENTITY_FORMAT: 'Entity ID format', // TODO translate
-  MQTT_ENTITY_FORMAT_0: 'Single instance, long name (v3.4)', // TODO translate
-  MQTT_ENTITY_FORMAT_1: 'Single instance, short name', // TODO translate
-  MQTT_ENTITY_FORMAT_2: 'Multiple instances, short name', // TODO translate
+  MQTT_ENTITY_FORMAT: 'Format de l\'ID de l\'entité',
+  MQTT_ENTITY_FORMAT_0: 'Instance unique, nom long (v3.4)',
+  MQTT_ENTITY_FORMAT_1: 'Instance unique, nom court',
+  MQTT_ENTITY_FORMAT_2: 'Instances multiples, nom court',
   MQTT_CLEAN_SESSION: 'Flag Clean Session',
   MQTT_RETAIN_FLAG: 'Toujours activer le Retain Flag',
   INACTIVE: 'Inactif',
@@ -260,7 +260,7 @@ const fr: Translation = {
   NETWORK_SCANNER: 'Scan réseau',
   NETWORK_NO_WIFI: 'Pas de réseau WiFi trouvé',
   NETWORK_BLANK_SSID: 'laisser vide pour désactiver le WiFi',
-  NETWORK_BLANK_BSSID: 'leave blank to use only SSID', // TODO translate
+  NETWORK_BLANK_BSSID: 'laisser vide pour utiliser uniquement le SSID',
   TX_POWER: 'Puissance Tx',
   HOSTNAME: "Nom d'hôte",
   NETWORK_DISABLE_SLEEP: 'Désactiver le mode veille du WiFi',
@@ -280,79 +280,78 @@ const fr: Translation = {
   ENTITY: 'entité',
   MIN: 'min',
   MAX: 'max',
-  BLOCK_NAVIGATE_1: 'You have unsaved changes', // TODO translate
-  BLOCK_NAVIGATE_2: 'If you navigate to a different page, your unsaved changes will be lost. Are you sure you want to leave this page?', // TODO translate
-  STAY: 'Stay', // TODO translate
-  LEAVE: 'Leave', // TODO translate
-  SCHEDULER: 'Scheduler', // TODO translate
-  SCHEDULER_HELP_1: 'Automate commands by adding scheduled events below. Set a unique Name to enable/disable activation via API/MQTT', // TODO translate
-  SCHEDULER_HELP_2: 'Use 00:00 to trigger once on start-up', // TODO translate
-  SCHEDULE: 'Schedule', // TODO translate
-  TIME: 'Time', // TODO translate
-  TIMER: 'Timer', // TODO translate
-  ONCHANGE: 'Sur le changement', // TODO translate
-  CONDITION: 'Condition', // TODO translate
-  IMMEDIATE: 'Immédiate', // TODO translate
-  SCHEDULE_UPDATED: 'Schedule updated', // TODO translate
-  SCHEDULE_TIMER_1: 'on startup', // TODO translate
-  SCHEDULE_TIMER_2: 'every minute', // TODO translate
-  SCHEDULE_TIMER_3: 'every hour', // TODO translate
-  CUSTOM_ENTITIES: 'Custom Entities', // TODO translate
-  ENTITIES_HELP_1: 'Fetch custom entities from the EMS bus', // TODO translate
-  ENTITIES_UPDATED: 'Entities Updated', // TODO translate
-  WRITEABLE: 'Writeable', // TODO translate
-  SHOWING: 'Showing', // TODO translate
-  SEARCH: 'Search', // TODO translate
-  CERT: 'TLS root certificate (leave blank for insecure)', // TODO translate
+  BLOCK_NAVIGATE_1: 'Vous avez des modifications non enregistrées',
+  BLOCK_NAVIGATE_2: 'Si vous naviguez vers une autre page, vos modifications non enregistrées seront perdues. Êtes-vous sûr de vouloir quitter cette page ?',
+  STAY: 'Rester',
+  LEAVE: 'Quitter',
+  SCHEDULER: 'Scheduler',
+  SCHEDULER_HELP_1: 'Automatiser les commandes en ajoutant des événements programmés ci-dessous. Définissez un nom unique pour activer/désactiver l\'activation via API/MQTT',
+  SCHEDULER_HELP_2: 'Utiliser 00:00 pour déclencher une fois au démarrage',
+  SCHEDULE: 'Programme',
+  TIME: 'Temps',
+  TIMER: 'Minuteur',
+  ONCHANGE: 'Sur le changement',
+  CONDITION: 'Condition',
+  IMMEDIATE: 'Immédiat',
+  SCHEDULE_UPDATED: 'Programme mis à jour',
+  SCHEDULE_TIMER_1: 'au démarrage',
+  SCHEDULE_TIMER_2: 'toutes les minutes',
+  SCHEDULE_TIMER_3: 'toutes les heures',
+  CUSTOM_ENTITIES: 'Entités personnalisées',
+  ENTITIES_HELP_1: 'Récupérer les entités personnalisées du bus EMS',
+  ENTITIES_UPDATED: 'Entités mises à jour',
+  WRITEABLE: 'Écriture',
+  SHOWING: 'Affichage',
+  SEARCH: 'Rechercher',
+  CERT: 'Certificat racine TLS (laisser vide pour l\'insecurité)',
   ENABLE_TLS: 'Activer TLS',
-  ON: 'On', // TODO translate
-  OFF: 'Off', // TODO translate
-  POLARITY: 'Polarity', // TODO translate
-  ACTIVEHIGH: 'Active High', // TODO translate
-  ACTIVELOW: 'Active Low', // TODO translate
-  UNCHANGED: 'Unchanged', // TODO translate
-  ALWAYS: 'Always', // TODO translate
-  ACTIVITY: 'Activity', // TODO translate
-  CONFIGURE: 'Configure {0}', // TODO translate
-  SYSTEM_MEMORY: 'System Memory', // TODO translate
-  APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings', // TODO translate
-  SECURITY_1: 'Add or remove users', // TODO translate
-  DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware', // TODO translate
-  MODULES: 'Module', // TODO translate
+  ON: 'On',
+  OFF: 'Off',
+  POLARITY: 'Polarity',
+  ACTIVEHIGH: 'Actif haut',
+  ACTIVELOW: 'Actif bas',
+  UNCHANGED: 'Inchangé',
+  ALWAYS: 'Toujours',
+  ACTIVITY: 'Activité',
+  CONFIGURE: 'Configurer {0}',
+  SYSTEM_MEMORY: 'Mémoire système',
+  APPLICATION_SETTINGS_1: 'Modifier les paramètres de l\'application EMS-ESP',
+  SECURITY_1: 'Ajouter ou supprimer des utilisateurs',
+  DOWNLOAD_UPLOAD_1: 'Télécharger et mettre à jour les paramètres et le firmware',
+  MODULES: 'Module',
   MODULES_1: 'Activer ou désactiver les modules externes',
-  MODULES_UPDATED: 'Modules updated', // TODO translate
-  MODULES_DESCRIPTION: 'Click on the Module to activate or de-activate EMS-ESP library modules', // TODO translate
-  MODULES_NONE: 'No external modules detected', // TODO translate
-  RENAME: 'Rename', // TODO translate
+  MODULES_UPDATED: 'Modules mis à jour',
+  MODULES_DESCRIPTION: 'Cliquer sur le module pour activer ou désactiver les modules EMS-ESP',
+  MODULES_NONE: 'Aucun module externe détecté',
+  RENAME: 'Renommer',
   ENABLE_MODBUS: 'Activer Modbus',
-  VIEW_LOG: 'View log to diagnose issues', // TODO translate
-  UPLOAD_DRAG: 'drag and drop a file here or click to select one', // TODO translate
-  SERVICES: 'Services', // TODO translate
-  ALLVALUES: 'All Values', // TODO translate
-  SPECIAL_FUNCTIONS: 'Special Functions',
-  WAIT_FIRMWARE: 'Firmware is uploading and installing', // TODO translate
-  INSTALL_VERSION: 'This will install version {0}. Are you sure?', // TODO translate
-  UPGRADE_AVAILABLE: 'There is a firmware upgrade available!', // TODO translate
-  LATEST_VERSION: 'You are using the latest firmware version', // TODO translate
-  PLEASE_WAIT: 'Please wait', // TODO translate
-  RESTARTING_PRE: 'Initializing', // TODO translate
-  RESTARTING_POST: 'Preparing', // TODO translate
-  AUTO_SCROLL: 'Auto Scroll', // TODO translate
-  DASHBOARD: 'Dashboard', // TODO translate
-  DEVELOPER_MODE: 'Developer Mode', // TODO translate
-  BYTES: 'Bytes', // TODO translate
-  BITMASK: 'Bit Mask',// TODO translate
-  DUPLICATE: 'Duplicate', // TODO translate
-  UPGRADE: 'Upgrade', // TODO translate
-  DASHBOARD_1: 'All EMS entities that are active and marked as Favorite, plus all Custom Entities, Schedules and external Sensors data are displayed below.', // TODO translate
-  NO_DATA_1: 'No favorite EMS entities found yet. Use the', // TODO translate
-  NO_DATA_2: 'module to mark them.', // TODO translate
-  NO_DATA_3: 'To see all available entities go to', // TODO translate
-  THIS_VERSION: 'This Version', // TODO translate
-  PLATFORM: 'Platform', // TODO translate
-  RELEASE_TYPE: 'Release Type', // TODO translate
-  REINSTALL: 'Re-install', // TODO translate
-  INTERNET_CONNECTION_REQUIRED: 'Internet connection required for automatic version checking and upgrading',
+  VIEW_LOG: 'Voir le journal pour diagnostiquer les problèmes',
+  UPLOAD_DRAG: 'glisser-déposer un fichier ici ou cliquer pour en sélectionner un',
+  SERVICES: 'Services',
+  ALLVALUES: 'Toutes les valeurs',
+  SPECIAL_FUNCTIONS: 'Fonctions spéciales',
+  WAIT_FIRMWARE: 'Firmware en cours de téléchargement et d\'installation',
+  INSTALL_VERSION: 'Cela va {0} la version {1}. Êtes-vous sûr ?',
+  UPDATE_AVAILABLE: 'mise à jour disponible',
+  LATEST_VERSION: 'Vous utilisez la dernière version {0} du firmware',
+  PLEASE_WAIT: 'Veuillez patienter',
+  RESTARTING_PRE: 'Initialisation',
+  RESTARTING_POST: 'Préparation',
+  AUTO_SCROLL: 'Défilement automatique',
+  DASHBOARD: 'Tableau de bord',
+  DEVELOPER_MODE: 'Mode développeur',
+  BYTES: 'Octets',
+  BITMASK: 'Masque de bits',
+  DUPLICATE: 'Dupliquer',
+  DASHBOARD_1: 'Toutes les entités EMS actives et marquées comme favoris, plus toutes les entités personnalisées, les programmes et les données des capteurs externes sont affichées ci-dessous.',
+  NO_DATA_1: 'Aucune entité EMS favorite trouvée. Utilisez le',
+  NO_DATA_2: 'module pour les marquer.',
+  NO_DATA_3: 'Pour voir toutes les entités disponibles, aller à',
+  THIS_VERSION: 'Cette version',
+  PLATFORM: 'Plateforme',
+  RELEASE_TYPE: 'Type de version',
+  INTERNET_CONNECTION_REQUIRED: 'Connexion Internet requise pour la vérification automatique des versions et la mise à niveau',
+  SWITCH_RELEASE_TYPE: 'Passer à la version {0}'
 };
 
 export default fr;

interface/src/i18n/it/index.ts

@@ -72,7 +72,7 @@ const it: Translation = {
   TX_ISSUES: 'Problema di Tx - prova una modalità differente',
   DISCONNECTED: 'Disconnesso',
   EMS_SCAN: 'Sei sicuro di voler iniziare una scansione completa del bus EMS ?',
-  DATA_TRAFFIC: 'Data Traffic', // TODO translate
+  DATA_TRAFFIC: 'Traffico dati',
   EMS_DEVICE: 'Dispositivo EMS ',
   SUCCESS: 'SUCCESSO',
   FAIL: 'FALLITO',
@@ -115,7 +115,7 @@ const it: Translation = {
   READONLY: 'Abilita modalità sola-lettura (blocca tutti i comandi di scrittura EMS Tx in uscita)',
   UNDERCLOCK_CPU: 'Abbassa velocità della CPU',
   REMOTE_TIMEOUT: 'Remote timeout',
-  REMOTE_TIMEOUT_EN: 'Disable remote on missing room temperature', // TODO translate
+  REMOTE_TIMEOUT_EN: 'Disabilitare il telecomando in caso di temperatura ambiente mancante',
   HEATINGOFF: 'Avviamento caldaia con riscaldamento forzato spento',
   MIN_DURATION: 'Wait time',
   ENABLE_SHOWER_TIMER: 'Abilita timer doccia',
@@ -174,8 +174,8 @@ const it: Translation = {
   FACTORY_RESET: 'Impostazioni di fabbrica',
   SYSTEM_FACTORY_TEXT: 'Il dispositivo è stato ripristinato alle impostazioni di fabbrica e ora verrà riavviato',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Sei sicuro di voler ripristinare il dispositivo alle impostazioni di fabbrica??',
-  AVAILABLE_VERSION: 'Latest Available Versions', // TODO translate
-  STABLE: 'Stable', // TODO translate
+  AVAILABLE_VERSION: 'Versioni disponibili',
+  STABLE: 'Stabile',
   DEVELOPMENT: 'Sviluppo',
   UPTIME: 'Tempo di attività del sistema',
   FREE_MEMORY: 'Free Memory',
@@ -184,10 +184,10 @@ const it: Translation = {
   APPSIZE: 'Applicazione (Partizione: Usata / Libera)',
   FILESYSTEM: 'Memoria Sistema (Usata / Libera)',
   BUFFER_SIZE: 'Max Buffer Size',
-  COMPACT: 'Compact',
-  DOWNLOAD_SETTINGS_TEXT: 'Create a backup of your configuration and settings', // TODO translate
-  UPLOAD_TEXT: 'Upload a new firmware file (.bin) or a backup file (.json)', // TODO translate
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here', // TODO translate
+  COMPACT: 'Compatto',
+  DOWNLOAD_SETTINGS_TEXT: 'Create a backup of your configuration and settings',
+  UPLOAD_TEXT: 'Upload a new firmware file (.bin) or a backup file (.json)',
+  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here',
   ERROR: 'Errore Inaspettato, prego tenta ancora',
   TIME_SET: 'Imposta Ora',
   MANAGE_USERS: 'Gestione Utenti',
@@ -260,7 +260,7 @@ const it: Translation = {
   NETWORK_SCANNER: 'Scansione Rete',
   NETWORK_NO_WIFI: 'Nessuana rete WiFi trovata',
   NETWORK_BLANK_SSID: 'lasciare vuoto per disattivare WiFi',
-  NETWORK_BLANK_BSSID: 'leave blank to use only SSID', // TODO translate
+  NETWORK_BLANK_BSSID: 'lasciare vuoto per usare solo SSID',
   TX_POWER: 'Potenza Tx',
   HOSTNAME: 'Nome ospite',
   NETWORK_DISABLE_SLEEP: 'Disabilita la modalità sospensione Wi-Fi',
@@ -303,56 +303,55 @@ const it: Translation = {
   WRITEABLE: 'Scrivibile',
   SHOWING: 'Visualizza',
   SEARCH: 'Ricerca',
-  CERT: 'TLS root certificate (leave blank for insecure)', // TODO translate
+  CERT: 'Certificato radice TLS (lasciare vuoto per l\'insecure)',
   ENABLE_TLS: 'Abilita TLS',
-  ON: 'On', // TODO translate
-  OFF: 'Off', // TODO translate
-  POLARITY: 'Polarity', // TODO translate
-  ACTIVEHIGH: 'Active High', // TODO translate
-  ACTIVELOW: 'Active Low', // TODO translate
-  UNCHANGED: 'Unchanged', // TODO translate
-  ALWAYS: 'Always', // TODO translate
-  ACTIVITY: 'Activity', // TODO translate
-  CONFIGURE: 'Configure {0}', // TODO translate
-  SYSTEM_MEMORY: 'System Memory', // TODO translate
-  APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings', // TODO translate
-  SECURITY_1: 'Add or remove users', // TODO translate
-  DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware', // TODO translate
-  MODULES: 'Module', // TODO translate
-  MODULES_1: 'Attiva o disattiva i moduli esterni', // TODO translate
-  MODULES_UPDATED: 'Modules updated', // TODO translate
-  MODULES_DESCRIPTION: 'Click on the Module to activate or de-activate EMS-ESP library modules', // TODO translate
-  MODULES_NONE: 'No external modules detected', // TODO translate
-  RENAME: 'Rename', // TODO translate  
+  ON: 'On',
+  OFF: 'Off',
+  POLARITY: 'Polarity',
+  ACTIVEHIGH: 'Active High',
+  ACTIVELOW: 'Active Low',
+  UNCHANGED: 'Unchanged',
+  ALWAYS: 'Always',
+  ACTIVITY: 'Activity',
+  CONFIGURE: 'Configure {0}',
+  SYSTEM_MEMORY: 'System Memory',
+  APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings',
+  SECURITY_1: 'Add or remove users',
+  DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware',
+  MODULES: 'Module',
+  MODULES_1: 'Attiva o disattiva i moduli esterni',
+  MODULES_UPDATED: 'Modules updated',
+  MODULES_DESCRIPTION: 'Click on the Module to activate or de-activate EMS-ESP library modules',
+  MODULES_NONE: 'No external modules detected',
+  RENAME: 'Rename',
   ENABLE_MODBUS: 'Abilita Modbus',
-  VIEW_LOG: 'View log to diagnose issues', // TODO translate
-  UPLOAD_DRAG: 'drag and drop a file here or click to select one', // TODO translate
-  SERVICES: 'Services', // TODO translate
-  ALLVALUES: 'All Values', // TODO translate
-  SPECIAL_FUNCTIONS: 'Special Functions', // TODO translate
-  WAIT_FIRMWARE: 'Firmware is uploading and installing', // TODO translate
-  INSTALL_VERSION: 'This will install version {0}. Are you sure?', // TODO translate
-  UPGRADE_AVAILABLE: 'There is a firmware upgrade available!', // TODO translate
-  LATEST_VERSION: 'You are using the latest firmware version', // TODO translate
-  PLEASE_WAIT: 'Please wait', // TODO translate
-  RESTARTING_PRE: 'Initializing', // TODO translate
-  RESTARTING_POST: 'Preparing', // TODO translate
-  AUTO_SCROLL: 'Auto Scroll', // TODO translate
-  DASHBOARD: 'Dashboard', // TODO translate
-  DEVELOPER_MODE: 'Developer Mode', // TODO translate
-  BYTES: 'Bytes', // TODO translate
-  BITMASK: 'Bit Mask',// TODO translate
-  DUPLICATE: 'Duplicate', // TODO translate
-  UPGRADE: 'Upgrade', // TODO translate
-  DASHBOARD_1: 'All EMS entities that are active and marked as Favorite, plus all Custom Entities, Schedules and external Sensors data are displayed below.', // TODO translate
-  NO_DATA_1: 'No favorite EMS entities found yet. Use the', // TODO translate
-  NO_DATA_2: 'module to mark them.', // TODO translate
-  NO_DATA_3: 'To see all available entities go to', // TODO translate
-  THIS_VERSION: 'This Version', // TODO translate
-  PLATFORM: 'Platform', // TODO translate
-  RELEASE_TYPE: 'Release Type', // TODO translate
-  REINSTALL: 'Re-install', // TODO translate
-  INTERNET_CONNECTION_REQUIRED: 'Internet connection required for automatic version checking and upgrading',
+  VIEW_LOG: 'Visualizza log per diagnosticare problemi',
+  UPLOAD_DRAG: 'trascina e rilascia un file qui o clicca per selezionare uno',
+  SERVICES: 'Servizi',
+  ALLVALUES: 'Tutti i valori',
+  SPECIAL_FUNCTIONS: 'Funzioni speciali',
+  WAIT_FIRMWARE: 'Firmware è in upload e installazione',
+  INSTALL_VERSION: 'Questo installerà la versione {1} {0}. Sei sicuro?',
+  UPDATE_AVAILABLE: 'aggiornamento disponibile',
+  LATEST_VERSION: 'Stai usando la versione più recente del firmware {0}',
+  PLEASE_WAIT: 'Attendere',
+  RESTARTING_PRE: 'Inizializzazione',
+  RESTARTING_POST: 'Preparazione',
+  AUTO_SCROLL: 'Scorrimento automatico',
+  DASHBOARD: 'Pannello di controllo',
+  DEVELOPER_MODE: 'Modalità sviluppatore',
+  BYTES: 'Byte',
+  BITMASK: 'Bitmask',
+  DUPLICATE: 'Duplicato',
+  DASHBOARD_1: 'Tutte le entità EMS che sono attive e marcate come preferite, più tutte le entità personalizzate, piani di programmazione e dati dei sensori esterni sono visualizzati di seguito.',
+  NO_DATA_1: 'Nessuna entità EMS preferita trovata. Usa il',
+  NO_DATA_2: 'modulo per marcarle.',
+  NO_DATA_3: 'Per vedere tutte le entità disponibili vai a',
+  THIS_VERSION: 'Questa versione',
+  PLATFORM: 'Piattaforma',
+  RELEASE_TYPE: 'Tipo di rilascio',
+  INTERNET_CONNECTION_REQUIRED: 'Connessione internet richiesta per il controllo automatico delle versioni e l\'aggiornamento',
+  SWITCH_RELEASE_TYPE: 'Cambia in {0} rilascio'
 };
 
 export default it;

interface/src/i18n/nl/index.ts

@@ -331,19 +331,18 @@ const nl: Translation = {
   ALLVALUES: 'All waarden',
   SPECIAL_FUNCTIONS: 'Speciale functies',
   WAIT_FIRMWARE: 'Firmware wordt geüpload en geïnstalleerd',
-  INSTALL_VERSION: 'Hiermee wordt versie {0} geïnstalleerd. Weet je het zeker?',
-  UPGRADE_AVAILABLE: 'Er is een firmware-upgrade beschikbaar!',
-  LATEST_VERSION: 'U gebruikt de nieuwste firmwareversie',
+  INSTALL_VERSION: 'Hiermee wordt versie {1} {0}. Weet je het zeker?',
+  UPDATE_AVAILABLE: 'update beschikbaar',
+  LATEST_VERSION: 'U gebruikt de nieuwste {0} firmwareversie',
   PLEASE_WAIT: 'Een ogenblik geduld',
   RESTARTING_PRE: 'Initialiseren',
   RESTARTING_POST: 'Voorbereiding',
   AUTO_SCROLL: 'Automatisch Scrollen',
   DASHBOARD: 'Dashboard',
   DEVELOPER_MODE: 'Ontwikkelaarsmodus',
-  BYTES: 'Bytes', // TODO translate
-  BITMASK: 'Bit Mask',// TODO translate
+  BYTES: 'Bytes',
+  BITMASK: 'Bit Mask',
   DUPLICATE: 'Duplicaat',
-  UPGRADE: 'Upgraden',
   DASHBOARD_1: 'Alle EMS-entiteiten die actief zijn en als favoriet zijn gemarkeerd, plus alle aangepaste entiteiten en externe sensorgegevens worden hieronder weergegeven.',
   NO_DATA_1: 'Er zijn nog geen favoriete EMS-entiteiten gevonden. Gebruik de',
   NO_DATA_2: 'module om ze te markeren.',
@@ -351,8 +350,8 @@ const nl: Translation = {
   THIS_VERSION: 'Deze Versie',
   PLATFORM: 'Platform',
   RELEASE_TYPE: 'Release Typ',
-  REINSTALL: 'Opnieuw Installeren',
   INTERNET_CONNECTION_REQUIRED: 'Internetverbinding vereist voor automatische versiecontrole en -upgrade',
+  SWITCH_RELEASE_TYPE: 'Switch naar {0} release'
 };
 
 export default nl;

interface/src/i18n/no/index.ts

@@ -43,7 +43,7 @@ const no: Translation = {
   RESET: 'Nullstill',
   APPLY_CHANGES: 'Utfør endringer({0})',
   UPDATE: 'Oppdater',
-  EXECUTE: 'Execute', // TODO translate
+  EXECUTE: 'Utfør',
   REMOVE: 'Fjern',
   PROBLEM_UPDATING: 'Problem med oppdatering',
   PROBLEM_LOADING: 'Problem med opplasting',
@@ -72,7 +72,7 @@ const no: Translation = {
   TX_ISSUES: 'Tx problemer - prøv en annen Tx Modus',
   DISCONNECTED: 'Frakoblet',
   EMS_SCAN: 'Er du sikker på du vil starte full søking av EMS bussen?',
-  DATA_TRAFFIC: 'Data Traffic', // TODO translate
+  DATA_TRAFFIC: 'Data trafikk',
   EMS_DEVICE: 'EMS Enhet',
   SUCCESS: 'VELLYKKET',
   FAIL: 'MISLYKKET',
@@ -115,9 +115,9 @@ const no: Translation = {
   READONLY: 'Aktiver read-only modus (blokker all EMS Tx Skriving)',
   UNDERCLOCK_CPU: 'Underklokking av prosessorhastighet',
   REMOTE_TIMEOUT: 'Remote timeout',
-  REMOTE_TIMEOUT_EN: 'Disable remote control on missing room temperature', // TODO translate
-  HEATINGOFF: 'Start boiler with forced heating off', // TODO translate
-  MIN_DURATION: 'Wait time',
+  REMOTE_TIMEOUT_EN: 'Deaktiver fjernstyring på manglende romtemperatur',
+  HEATINGOFF: 'Start kjele med tvingt oppvarming av',
+  MIN_DURATION: 'Ventetid',
   ENABLE_SHOWER_TIMER: 'Aktiver Dusjtimer',
   ENABLE_SHOWER_ALERT: 'Aktiver Dusj-varsling',
   TRIGGER_TIME: 'Aktiveringstid',
@@ -174,9 +174,9 @@ const no: Translation = {
   FACTORY_RESET: 'Sett tilbake til fabrikkinstilling',
   SYSTEM_FACTORY_TEXT: 'Enhet har blitt satt tilbake til fabrikkinstilling og vil restarte',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Er du sikker på at du vil resette enheten til fabrikkinstillinger?',
-  AVAILABLE_VERSION: 'Latest Available Versions', // TODO translate
-  STABLE: 'Stable', // TODO translate
-  DEVELOPMENT: 'Development',
+  AVAILABLE_VERSION: 'Tilgjengelige versjoner',
+  STABLE: 'Stabil',
+  DEVELOPMENT: 'Utvikling',
   UPTIME: 'System Oppetid',
   FREE_MEMORY: 'Ledig Memory',
   PSRAM: 'PSRAM (Størrelse / Ledig)',
@@ -185,9 +185,9 @@ const no: Translation = {
   FILESYSTEM: 'File System (Brukt / Ledig)',
   BUFFER_SIZE: 'Max Buffer Størrelse',
   COMPACT: 'Komprimere',
-  DOWNLOAD_SETTINGS_TEXT: 'Create a backup of your configuration and settings', // TODO translate
-  UPLOAD_TEXT: 'Upload a new firmware file (.bin) or a backup file (.json)', // TODO translate
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here', // TODO translate
+  DOWNLOAD_SETTINGS_TEXT: 'Lag en sikkerhetskopi av dine konfigurasjon og innstillinger',
+  UPLOAD_TEXT: 'Last opp en ny firmware fil (.bin) eller en sikkerhetskopi fil (.json)',
+  UPLOAD_DROP_TEXT: 'Dropp en firmware fil (.bin) eller klikk her',
   ERROR: 'Ukjent feil, prøv igjen',
   TIME_SET: 'Still in tid',
   MANAGE_USERS: 'Administrer Brukere',
@@ -223,7 +223,7 @@ const no: Translation = {
   MQTT_INT_THERMOSTATS: 'Termostat',
   MQTT_INT_SOLAR: 'Solpaneler',
   MQTT_INT_MIXER: 'Blandeventil',
-  MQTT_INT_WATER: 'Water Modules', // TODO translate
+  MQTT_INT_WATER: 'Vannmoduler',
   MQTT_QUEUE: 'MQTT Queue',
   DEFAULT: 'Standard',
   MQTT_ENTITY_FORMAT: 'Enhets ID format',
@@ -260,7 +260,7 @@ const no: Translation = {
   NETWORK_SCANNER: 'Nettverk Scanner',
   NETWORK_NO_WIFI: 'Ingen trådløse nett funnet',
   NETWORK_BLANK_SSID: 'la feltet være blankt for å deaktivisere trådløst nettverk',
-  NETWORK_BLANK_BSSID: 'leave blank to use only SSID', // TODO translate
+  NETWORK_BLANK_BSSID: 'la feltet være blankt for å bruke kun SSID',
   TX_POWER: 'Tx Effekt',
   HOSTNAME: 'Hostname',
   NETWORK_DISABLE_SLEEP: 'Hindre at trådløst nettverk går i Sleep Mode',
@@ -297,62 +297,61 @@ const no: Translation = {
   SCHEDULE_TIMER_1: 'ved oppstart',
   SCHEDULE_TIMER_2: 'hvert minutt',
   SCHEDULE_TIMER_3: 'hver time',
-  CUSTOM_ENTITIES: 'Custom Entities', // TODO translate
-  ENTITIES_HELP_1: 'Fetch custom entities from the EMS bus', // TODO translate
-  ENTITIES_UPDATED: 'Entities Updated', // TODO translate
-  WRITEABLE: 'Writeable', // TODO translate
-  SHOWING: 'Showing', // TODO translate
-  SEARCH: 'Search', // TODO translate
-  CERT: 'TLS root certificate (leave blank for insecure)', // TODO translate
+  CUSTOM_ENTITIES: 'Personlige entiteter',
+  ENTITIES_HELP_1: 'Hent personlige entiteter fra EMS bussen',
+  ENTITIES_UPDATED: 'Entiteter oppdatert',
+  WRITEABLE: 'Skrivbar',
+  SHOWING: 'Viser',
+  SEARCH: 'Søk',
+  CERT: 'TLS rot sertifikat (la feltet stå blankt for usikkert)',
   ENABLE_TLS: 'Aktiviser TLS',
-  ON: 'On', // TODO translate
-  OFF: 'Off', // TODO translate
-  POLARITY: 'Polarity', // TODO translate
-  ACTIVEHIGH: 'Active High', // TODO translate
-  ACTIVELOW: 'Active Low', // TODO translate
-  UNCHANGED: 'Unchanged', // TODO translate
-  ALWAYS: 'Always', // TODO translate
-  ACTIVITY: 'Activity', // TODO translate
-  CONFIGURE: 'Configure {0}', // TODO translate
-  SYSTEM_MEMORY: 'System Memory', // TODO translate
-  APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings', // TODO translate
-  SECURITY_1: 'Add or remove users', // TODO translate
-  DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware', // TODO translate
-  MODULES: 'Module', // TODO translate
+  ON: 'På',
+  OFF: 'Av',
+  POLARITY: 'Polarity',
+  ACTIVEHIGH: 'Active High',
+  ACTIVELOW: 'Active Low',
+  UNCHANGED: 'Unchanged',
+  ALWAYS: 'Always',
+  ACTIVITY: 'Aktivitet',
+  CONFIGURE: 'Konfigurer {0}',
+  SYSTEM_MEMORY: 'System Memory',
+  APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings',
+  SECURITY_1: 'Add or remove users',
+  DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware',
+  MODULES: 'Modul',
   MODULES_1: 'Aktiver eller deaktiver eksterne moduler',
-  MODULES_UPDATED: 'Modules updated', // TODO translate
-  MODULES_DESCRIPTION: 'Click on the Module to activate or de-activate EMS-ESP library modules', // TODO translate
-  MODULES_NONE: 'No external modules detected', // TODO translate
-  RENAME: 'Rename', // TODO translate 
+  MODULES_UPDATED: 'Moduler oppdatert',
+  MODULES_DESCRIPTION: 'Klikk på modulen for å aktivere eller deaktivere EMS-ESP biblioteksmoduler',
+  MODULES_NONE: 'Ingen eksterne moduler funnet',
+  RENAME: 'Gi nytt navn',
   ENABLE_MODBUS: 'Aktiver Modbus',
-  VIEW_LOG: 'View log to diagnose issues', // TODO translate
-  UPLOAD_DRAG: 'drag and drop a file here or click to select one', // TODO translate
-  SERVICES: 'Services', // TODO translate
-  ALLVALUES: 'All Values', // TODO translate
-  SPECIAL_FUNCTIONS: 'Special Functions', // TODO translate
-  WAIT_FIRMWARE: 'Firmware is uploading and installing', // TODO translate
-  INSTALL_VERSION: 'This will install version {0}. Are you sure?', // TODO translate
-  UPGRADE_AVAILABLE: 'There is a firmware upgrade available!', // TODO translate
-  LATEST_VERSION: 'You are using the latest firmware version', // TODO translate
-  PLEASE_WAIT: 'Please wait', // TODO translate
-  RESTARTING_PRE: 'Initializing', // TODO translate
-  RESTARTING_POST: 'Preparing', // TODO translate
-  AUTO_SCROLL: 'Auto Scroll', // TODO translate
-  DASHBOARD: 'Dashboard', // TODO translate
-  DEVELOPER_MODE: 'Developer Mode', // TODO translate
-  BYTES: 'Bytes', // TODO translate
-  BITMASK: 'Bit Mask',// TODO translate
-  DUPLICATE: 'Duplicate', // TODO translate
-  UPGRADE: 'Upgrade', // TODO translate
-  DASHBOARD_1: 'All EMS entities that are active and marked as Favorite, plus all Custom Entities, Schedules and external Sensors data are displayed below.', // TODO translate
-  NO_DATA_1: 'No favorite EMS entities found yet. Use the', // TODO translate
-  NO_DATA_2: 'module to mark them.', // TODO translate
-  NO_DATA_3: 'To see all available entities go to', // TODO translate
-  THIS_VERSION: 'This Version', // TODO translate
-  PLATFORM: 'Platform', // TODO translate
-  RELEASE_TYPE: 'Release Type', // TODO translate
-  REINSTALL: 'Re-install', // TODO translate
-  INTERNET_CONNECTION_REQUIRED: 'Internet connection required for automatic version checking and upgrading',
+  VIEW_LOG: 'Se logg for å diagnostisere problemer',
+  UPLOAD_DRAG: 'dra og slippe en fil her eller klikk for å velge en',
+  SERVICES: 'Tjenester',
+  ALLVALUES: 'Alle verdier',
+  SPECIAL_FUNCTIONS: 'Spesielle funksjoner',
+  WAIT_FIRMWARE: 'Firmware er i opplasting og installasjon',
+  INSTALL_VERSION: 'Dette vil {0} versjon {1}. Er du sikker?',
+  UPDATE_AVAILABLE: 'oppdatering tilgjengelig',
+  LATEST_VERSION: 'Du bruker den nyeste {0} firmware versjonen',
+  PLEASE_WAIT: 'Vennligst vent',
+  RESTARTING_PRE: 'Initialiserer',
+  RESTARTING_POST: 'Forbereder',
+  AUTO_SCROLL: 'Automatisk rulling',
+  DASHBOARD: 'Dashboard',
+  DEVELOPER_MODE: 'Utvikler modus',
+  BYTES: 'Bytes',
+  BITMASK: 'Bitmask',
+  DUPLICATE: 'Duplikat',
+  DASHBOARD_1: 'Alle EMS enheter som er aktive og merket som favoritt, pluss alle personlige enheter, planlegg og eksterne sensor data er vist nedenfor.',
+  NO_DATA_1: 'Ingen favoritte EMS enheter funnet enda. Bruk',
+  NO_DATA_2: 'modul for å markere dem.',
+  NO_DATA_3: 'For å se alle tilgjengelige enheter, gå til',
+  THIS_VERSION: 'Denne versjonen',
+  PLATFORM: 'Plattform',
+  RELEASE_TYPE: 'Utgivelses type',
+  INTERNET_CONNECTION_REQUIRED: 'Internettilkobling kreves for automatisk versjonskontroll og oppgradering',
+  SWITCH_RELEASE_TYPE: 'Bytt til {0} utgivelse'
 };
 
 export default no;

interface/src/i18n/pl/index.ts

@@ -72,7 +72,7 @@ const pl: BaseTranslation = {
   TX_ISSUES: 'problem z zapisem na magistralę EMS, spróbuj wybrać inny "Tryb transmisji (Tx)"',
   DISCONNECTED: 'brak połączenia',
   EMS_SCAN: 'Czy na pewno wykonać pełne skanowanie magistrali EMS?',
-  DATA_TRAFFIC: 'Data Traffic', // TODO translate
+  DATA_TRAFFIC: 'Ruch Danych',
   EMS_DEVICE: 'Urządzenie EMS',
   SUCCESS: 'Udane',
   FAIL: 'Nieudane',
@@ -115,7 +115,7 @@ const pl: BaseTranslation = {
   READONLY: 'Tryb pracy "tylko do odczytu" (blokuje wszystkie komendy zapisu na magistralę EMS)',
   UNDERCLOCK_CPU: 'Obniż taktowanie CPU',
   REMOTE_TIMEOUT: 'Remote timeout',
-  REMOTE_TIMEOUT_EN: 'Disable remote control on missing room temperature', // TODO translate
+  REMOTE_TIMEOUT_EN: 'Wyłącz kontrolę zdalną przy braku temperatury pomieszczenia',
   HEATINGOFF: 'Uruchom kocioł z wymuszonym wyłączonym grzaniem',
   MIN_DURATION: 'Wait time',
   ENABLE_SHOWER_TIMER: 'Aktywuj minutnik prysznica',
@@ -174,9 +174,9 @@ const pl: BaseTranslation = {
   FACTORY_RESET: 'Ustawienia fabryczne',
   SYSTEM_FACTORY_TEXT: 'Interfejs EMS-ESP został przywrócony do ustawień fabrycznych i zostanie teraz ponownie uruchomiony.',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Na pewno chcesz przywrócić ustawienia fabryczne interfejsu EMS-ESP?',
-  AVAILABLE_VERSION: 'Latest Available Versions', // TODO translate
-  STABLE: 'Stable', // TODO translate
-  DEVELOPMENT: 'Testowe',
+  AVAILABLE_VERSION: 'Najnowsze dostępne wersje',
+  STABLE: 'Stabilna',
+  DEVELOPMENT: 'Testowa',
   UPTIME: 'Czas działania systemu',
   FREE_MEMORY: 'Wolne Memory',
   PSRAM: 'PSRAM (rozmiar / wolne)',
@@ -185,9 +185,9 @@ const pl: BaseTranslation = {
   FILESYSTEM: 'System plików (wykorzystane / wolne)',
   BUFFER_SIZE: 'Maksymalna pojemność bufora (ilość wpisów)',
   COMPACT: 'Kompaktowy',
-  DOWNLOAD_SETTINGS_TEXT: 'Create a backup of your configuration and settings', // TODO translate
-  UPLOAD_TEXT: 'Upload a new firmware file (.bin) or a backup file (.json)', // TODO translate
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here', // TODO translate
+  DOWNLOAD_SETTINGS_TEXT: 'Utwórz kopię swoich ustawień i konfiguracji',
+  UPLOAD_TEXT: 'Wgraj nowy plik firmware (.bin) lub kopię ustawień (.json)',
+  UPLOAD_DROP_TEXT: 'Upuść plik firmware .bin lub kliknij tutaj',
   ERROR: 'Nieoczekiwany błąd, spróbuj ponownie!',
   TIME_SET: 'Zegar został ustawiony.',
   MANAGE_USERS: 'Zarządzanie użytkownikami',
@@ -318,41 +318,40 @@ const pl: BaseTranslation = {
   APPLICATION_SETTINGS_1: 'Modyfikacja ustawień aplikacji EMS-ESP',
   SECURITY_1: 'Dodawanie i usuwanie użytkowników',
   DOWNLOAD_UPLOAD_1: 'Pobieranie/wysyłanie ustawień i firmware',
-  MODULES: 'Module', // TODO translate
+  MODULES: 'Moduł',
   MODULES_1: 'Aktywuj lub dezaktywuj moduły zewnętrzne',
-  MODULES_UPDATED: 'Modules updated', // TODO translate
-  MODULES_DESCRIPTION: 'Click on the Module to activate or de-activate EMS-ESP library modules', // TODO translate
-  MODULES_NONE: 'No external modules detected', // TODO translate
-  RENAME: 'Rename', // TODO translate 
+  MODULES_UPDATED: 'Zaktualizowano moduły',
+  MODULES_DESCRIPTION: 'Kliknij na moduł aby aktywować lub dezaktywować bibliotekę modułów EMS-ESP',
+  MODULES_NONE: 'Brak wykrytych modułów zewnętrznych',
+  RENAME: 'Zmień nazwę',
   ENABLE_MODBUS: 'Aktywuj Modbus',
-  VIEW_LOG: 'View log to diagnose issues', // TODO translate
-  UPLOAD_DRAG: 'drag and drop a file here or click to select one', // TODO translate
-  SERVICES: 'Services', // TODO translate
-  ALLVALUES: 'All Values', // TODO translate
-  SPECIAL_FUNCTIONS: 'Special Functions', // TODO translate
-  WAIT_FIRMWARE: 'Firmware is uploading and installing', // TODO translate
-  INSTALL_VERSION: 'This will install version {0}. Are you sure?', // TODO translate
-  UPGRADE_AVAILABLE: 'There is a firmware upgrade available!', // TODO translate
-  LATEST_VERSION: 'You are using the latest firmware version', // TODO translate
-  PLEASE_WAIT: 'Please wait', // TODO translate
-  RESTARTING_PRE: 'Initializing', // TODO translate
-  RESTARTING_POST: 'Preparing', // TODO translate
-  AUTO_SCROLL: 'Auto Scroll', // TODO translate
-  DASHBOARD: 'Dashboard', // TODO translate
-  DEVELOPER_MODE: 'Developer Mode', // TODO translate
-  BYTES: 'Bytes', // TODO translate
-  BITMASK: 'Bit Mask',// TODO translate
-  DUPLICATE: 'Duplicate', // TODO translate
-  UPGRADE: 'Upgrade', // TODO translate
-  DASHBOARD_1: 'All EMS entities that are active and marked as Favorite, plus all Custom Entities, Schedules and external Sensors data are displayed below.', // TODO translate
-  NO_DATA_1: 'No favorite EMS entities found yet. Use the', // TODO translate
-  NO_DATA_2: 'module to mark them.', // TODO translate
-  NO_DATA_3: 'To see all available entities go to', // TODO translate
-  THIS_VERSION: 'This Version', // TODO translate
-  PLATFORM: 'Platform', // TODO translate
-  RELEASE_TYPE: 'Release Type', // TODO translate
-  REINSTALL: 'Re-install', // TODO translate
-  INTERNET_CONNECTION_REQUIRED: 'Internet connection required for automatic version checking and upgrading', // TODO translate
+  VIEW_LOG: 'Zdiagnozuj problemy',
+  UPLOAD_DRAG: 'przeciągnij i upuść plik lub kliknij tutaj',
+  SERVICES: 'Usługi',
+  ALLVALUES: 'Wszystkie wartości',
+  SPECIAL_FUNCTIONS: 'Specjalne funkcje',
+  WAIT_FIRMWARE: 'Firma jest wysyłana i instaluje się',
+  INSTALL_VERSION: 'To zainstaluje wersję {1} {0}. Jesteś pewny?',
+  UPDATE_AVAILABLE: 'aktualizacja dostępna',
+  LATEST_VERSION: 'Jesteś używając najnowszej wersji firmware {0}',
+  PLEASE_WAIT: 'Proszę czekać',
+  RESTARTING_PRE: 'Inicjalizacja',
+  RESTARTING_POST: 'Przygotowanie',
+  AUTO_SCROLL: 'Auto Scroll',
+  DASHBOARD: 'Pulpit',
+  DEVELOPER_MODE: 'Tryb programisty',
+  BYTES: 'Bajty',
+  BITMASK: 'Bit Mask',
+  DUPLICATE: 'Duplicate',
+  DASHBOARD_1: 'All EMS entities that are active and marked as Favorite, plus all Custom Entities, Schedules and external Sensors data are displayed below.',
+  NO_DATA_1: 'Brak ulubionych encji EMS. Użyj',
+  NO_DATA_2: 'moduł do ich oznaczenia.',
+  NO_DATA_3: 'Aby zobaczyć wszystkie dostępne encje przejdź do',
+  THIS_VERSION: 'Ta wersja',
+  PLATFORM: 'Platforma',
+  RELEASE_TYPE: 'Typ wydania',
+  INTERNET_CONNECTION_REQUIRED: 'Połączenie internetowe jest wymagane do automatycznej kontroli wersji i aktualizacji',
+  SWITCH_RELEASE_TYPE: 'Zmień na {0} wydanie'
 };
 
 export default pl;

interface/src/i18n/sk/index.ts

@@ -155,7 +155,7 @@ const sk: Translation = {
   NAME: 'Názov',
   CUSTOMIZATIONS_RESET: 'Naozaj chcete odstrániť všetky prispôsobenia vrátane vlastných nastavení snímačov teploty a analógových snímačov?',
   SUPPORT_INFORMATION: 'Informácie pre podporu',
-  HELP_INFORMATION_1:  'Navštívte online wiki, kde nájdete pokyny na konfiguráciu EMS-ESP',
+  HELP_INFORMATION_1: 'Navštívte online wiki, kde nájdete pokyny na konfiguráciu EMS-ESP',
   HELP_INFORMATION_2: 'Pre živý komunitný chat sa pripojte na náš Discord server',
   HELP_INFORMATION_3: 'Ak chcete požiadať o funkciu alebo nahlásiť chybu',
   HELP_INFORMATION_4: 'nezabudnite si stiahnuť a pripojiť informácie o vašom systéme, aby ste mohli rýchlejšie reagovať pri nahlasovaní problému',
@@ -187,7 +187,7 @@ const sk: Translation = {
   COMPACT: 'Kompaktné',
   DOWNLOAD_SETTINGS_TEXT: 'Vytvorte zálohu svojej konfigurácie a nastavení',
   UPLOAD_TEXT: 'Nahrajte nový súbor firmvéru (.bin) alebo súbor zálohy (.json)',
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here', // TODO translate
+  UPLOAD_DROP_TEXT: 'Presuňte súbor .bin firmvéru alebo kliknite sem',
   ERROR: 'Neočakávaná chyba, prosím skúste to znova',
   TIME_SET: 'Nastavený čas',
   MANAGE_USERS: 'Správa používateľov',
@@ -331,19 +331,18 @@ const sk: Translation = {
   ALLVALUES: 'Všetky hodnoty',
   SPECIAL_FUNCTIONS: 'Špeciálne funkcie',
   WAIT_FIRMWARE: 'Firmvér sa nahráva a inštaluje',
-  INSTALL_VERSION: 'Týmto sa inštalovať verzia {0}. Si si istý?',
-  UPGRADE_AVAILABLE: 'K dispozícii je aktualizácia firmvéru!',
-  LATEST_VERSION: 'Používate poslednú verziu firmvéru',
+  INSTALL_VERSION: 'Týmto sa {0} verzia {1}. Si si istý?',
+  UPDATE_AVAILABLE: 'dostupná aktualizácia',
+  LATEST_VERSION: 'Používate poslednú {0} verziu firmvéru',
   PLEASE_WAIT: 'Čakajte prosím',
   RESTARTING_PRE: 'Prebieha inicializácia',
   RESTARTING_POST: 'Príprava',
   AUTO_SCROLL: 'Automatické rolovanie',
   DASHBOARD: 'Panel',
   DEVELOPER_MODE: 'Režim vývojára',
-  BYTES: 'Bytes', // TODO translate
-  BITMASK: 'Bit Mask',// TODO translate
+  BYTES: 'Bytov',
+  BITMASK: 'Bitová maska',
   DUPLICATE: 'Duplicitné',
-  UPGRADE: 'Inovovať',
   DASHBOARD_1: 'Všetky entity EMS, ktoré sú aktívne a označené ako obľúbené, plus všetky vlastné entity, plány a údaje externých senzorov sú zobrazené nižšie.',
   NO_DATA_1: 'Nenašli sa žiadne obľúbené entity EMS. Použite',
   NO_DATA_2: 'modul na ich označenie.',
@@ -351,8 +350,8 @@ const sk: Translation = {
   THIS_VERSION: 'Táto verzia',
   PLATFORM: 'Platforma',
   RELEASE_TYPE: 'Typ vydania',
-  REINSTALL: 'Preinštalovať',
   INTERNET_CONNECTION_REQUIRED: 'Internetové pripojenie je potrebné pre automatickú kontrolu a aktualizáciu',
+  SWITCH_RELEASE_TYPE: 'Prepnúť na {0} verziu'
 };
 
 export default sk;

interface/src/i18n/sv/index.ts

@@ -187,7 +187,7 @@ const sv: Translation = {
   COMPACT: 'Komprimerad',
   DOWNLOAD_SETTINGS_TEXT: 'Skapa en säkerhetskopia av din konfiguration och inställningar',
   UPLOAD_TEXT: 'Ladda upp en ny firmwarefil (.bin) eller en säkerhetskopiafil (.json)',
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here', // TODO translate
+  UPLOAD_DROP_TEXT: 'Droppa en firmware .bin fil eller klicka här',
   ERROR: 'Okänt fel, var god försök igen',
   TIME_SET: 'Ställ in tid',
   MANAGE_USERS: 'Användare',
@@ -331,28 +331,27 @@ const sv: Translation = {
   ALLVALUES: 'Alla värden',
   SPECIAL_FUNCTIONS: 'Specialfunktioner',
   WAIT_FIRMWARE: 'Firmware laddas upp och installeras',
-  INSTALL_VERSION: 'Det här kommer installera version {0}. Är du säker?',
-  UPGRADE_AVAILABLE: 'Det finns en tillgänglig firmwareupgradering!',
-  LATEST_VERSION: 'Du använder den senaste firmwareversionen.',
+  INSTALL_VERSION: 'Det här kommer {0} version {1}. Är du säker?',
+  UPDATE_AVAILABLE: 'uppdatering tillgänglig',
+  LATEST_VERSION: 'Du använder den senaste {0} firmwareversionen.',
   PLEASE_WAIT: 'Var god vänta',
   RESTARTING_PRE: 'Initialiserar',
   RESTARTING_POST: 'Förbereder',
   AUTO_SCROLL: 'Autoskrolla',
   DASHBOARD: 'Kontrollpanel',
   DEVELOPER_MODE: 'Utvecklarläge',
-  BYTES: 'Bytes', // TODO translate
-  BITMASK: 'Bit Mask',// TODO translate
+  BYTES: 'Bytes',
+  BITMASK: 'Bitmask',
   DUPLICATE: 'Dublett',
-  UPGRADE: 'Uppgradera',
-  DASHBOARD_1: 'All EMS entities that are active and marked as Favorite, plus all Custom Entities, Schedules and external Sensors data are displayed below.', // TODO translate
-  NO_DATA_1: 'No favorite EMS entities found yet. Use the', // TODO translate
-  NO_DATA_2: 'module to mark them.', // TODO translate
-  NO_DATA_3: 'To see all available entities go to', // TODO translate
-  THIS_VERSION: 'This Version', // TODO translate
-  PLATFORM: 'Platform', // TODO translate
-  RELEASE_TYPE: 'Release Type', // TODO translate
-  REINSTALL: 'Re-install', // TODO translate
+  DASHBOARD_1: 'Alla EMS-enheter som är aktiva och markerade som favorit, plus alla anpassade entiteter, scheman och externa sensor-data visas nedan.',
+  NO_DATA_1: 'Inga favorit EMS enheter hittade än. Använd',
+  NO_DATA_2: 'modul för att markera dem.',
+  NO_DATA_3: 'För att se alla tillgängliga enheter, gå till',
+  THIS_VERSION: 'Denna version',
+  PLATFORM: 'Plattform',
+  RELEASE_TYPE: 'Utgivelsestyp',
   INTERNET_CONNECTION_REQUIRED: 'Internetanslutning krävs för automatisk version kontroll och uppdatering',
+  SWITCH_RELEASE_TYPE: 'Byt till {0} utgåva'
 };
 
 export default sv;

interface/src/i18n/tr/index.ts

@@ -43,7 +43,7 @@ const tr: Translation = {
   RESET: 'Reset',
   APPLY_CHANGES: 'Apply Changes ({0})',
   UPDATE: 'Update',
-  EXECUTE: 'Execute', // TODO translate
+  EXECUTE: 'Uygulamak',
   REMOVE: 'Kaldır',
   PROBLEM_UPDATING: 'Güncelleme Sorunu',
   PROBLEM_LOADING: 'Yükleme Sorunu',
@@ -72,7 +72,7 @@ const tr: Translation = {
   TX_ISSUES: 'Tx sorunu - başka bir Tx Modu deneyin',
   DISCONNECTED: 'Bağlantı kesildi',
   EMS_SCAN: 'EMS Hattında tam bir cihaz taraması başlatmak istediğinizden emin misiniz?',
-  DATA_TRAFFIC: 'Data Traffic', // TODO translate
+  DATA_TRAFFIC: 'Veri trafiği',
   EMS_DEVICE: 'EMS Cihazı',
   SUCCESS: 'BAŞARILI',
   FAIL: 'HATA',
@@ -115,8 +115,8 @@ const tr: Translation = {
   READONLY: 'Salt okunur modu devreye al (bütün giden EMS Tx Yazma komutlarını engeller)',
   UNDERCLOCK_CPU: 'İşlemci hızını düşür',
   REMOTE_TIMEOUT: 'Remote timeout',
-  REMOTE_TIMEOUT_EN: 'Disable remote on missing room temperature', // TODO translate
-  HEATINGOFF: 'Start boiler with forced heating off', // TODO translate
+  REMOTE_TIMEOUT_EN: 'Disable remote on missing room temperature',
+  HEATINGOFF: 'Start boiler with forced heating off',
   MIN_DURATION: 'Wait time',
   ENABLE_SHOWER_TIMER: 'Duş Sayacını Devreye Al',
   ENABLE_SHOWER_ALERT: 'Duş Alarmını Devreye Al',
@@ -174,8 +174,8 @@ const tr: Translation = {
   FACTORY_RESET: 'Fabrika ayarına dönme',
   SYSTEM_FACTORY_TEXT: 'Cihaz fabrika ayarlarına döndü ve şimdi yendiden başlatılacak',
   SYSTEM_FACTORY_TEXT_DIALOG: 'Cihazı fabrika ayarlarına döndürmek istediğinize emin misiniz?',
-  AVAILABLE_VERSION: 'Latest Available Versions', // TODO translate
-  STABLE: 'Stable', // TODO translate
+  AVAILABLE_VERSION: 'En son kullanılabilir sürümler',
+  STABLE: 'Kararlı',
   DEVELOPMENT: 'Geliştirme',
   UPTIME: 'Sistem Çalışma Süresi',
   FREE_MEMORY: 'Yığın Memory',
@@ -185,9 +185,9 @@ const tr: Translation = {
   FILESYSTEM: 'Dosya Sistemi (Kullanılmış / Boş)',
   BUFFER_SIZE: 'En fazla bellek boyutu',
   COMPACT: 'Sıkışık',
-  DOWNLOAD_SETTINGS_TEXT: 'Create a backup of your configuration and settings', // TODO translate
-  UPLOAD_TEXT: 'Upload a new firmware file (.bin) or a backup file (.json)', // TODO translate
-  UPLOAD_DROP_TEXT: 'Drop a firmware .bin file or click here', // TODO translate
+  DOWNLOAD_SETTINGS_TEXT: 'Yapılandırma ve ayarlarınızın yedekleme yapın',
+  UPLOAD_TEXT: 'Yeni bir firmware dosyası (.bin) veya yedek dosyası (.json) yükle',
+  UPLOAD_DROP_TEXT: 'Bir firmware .bin dosyası veya buraya tıklayın',
   ERROR: 'Beklenemedik hata, lütfen tekrar deneyin.',
   TIME_SET: 'Zaman ayarı',
   MANAGE_USERS: 'Kullanıcıları yönet',
@@ -223,7 +223,7 @@ const tr: Translation = {
   MQTT_INT_THERMOSTATS: 'Termostatlar',
   MQTT_INT_SOLAR: 'Güneş Enerjisi Modülleri',
   MQTT_INT_MIXER: 'Karışım Modülleri',
-  MQTT_INT_WATER: 'Water Modules', // TODO translate
+  MQTT_INT_WATER: 'Su Modülleri',
   MQTT_QUEUE: 'MQTT Sırası',
   DEFAULT: 'Varsayılan',
   MQTT_ENTITY_FORMAT: 'Varlık Kimlik biçimi',
@@ -260,7 +260,7 @@ const tr: Translation = {
   NETWORK_SCANNER: 'Ağ Tarayıcısı',
   NETWORK_NO_WIFI: 'Hiçbir Kablosuz Ağ bulunamadı',
   NETWORK_BLANK_SSID: 'Kablosuz ağı devre dışı bırakmak için boş bırakın',
-  NETWORK_BLANK_BSSID: 'leave blank to use only SSID', // TODO translate
+  NETWORK_BLANK_BSSID: 'sadece SSID kullanmak için boş bırakın',
   TX_POWER: 'Aktarım gücü',
   HOSTNAME: 'Ana Makine Adı',
   NETWORK_DISABLE_SLEEP: 'Kablosuz uyku modunu devre dışına al',
@@ -280,79 +280,78 @@ const tr: Translation = {
   ENTITY: 'varlık',
   MIN: 'min',
   MAX: 'maks',
-  BLOCK_NAVIGATE_1: 'You have unsaved changes', // TODO translate
-  BLOCK_NAVIGATE_2: 'If you navigate to a different page, your unsaved changes will be lost. Are you sure you want to leave this page?', // TODO translate
-  STAY: 'Stay', // TODO translate
-  LEAVE: 'Leave', // TODO translate
-  SCHEDULER: 'Scheduler', // TODO translate
-  SCHEDULER_HELP_1: 'Automate commands by adding scheduled events below. Set a unique Name to enable/disable activation via API/MQTT', // TODO translate
-  SCHEDULER_HELP_2: 'Use 00:00 to trigger once on start-up', // TODO translate
-  SCHEDULE: 'Schedule', // TODO translate
-  TIME: 'Time', // TODO translate
-  TIMER: 'Timer', // TODO translate
+  BLOCK_NAVIGATE_1: 'Değiştirilmişleriniz var',
+  BLOCK_NAVIGATE_2: 'Farklı bir sayfaya geçerseniz değiştirilmişleriniz kaybolacak. Bu sayfadan çıkmak istediğinize emin misiniz?',
+  STAY: 'Kal',
+  LEAVE: 'Çık',
+  SCHEDULER: 'Zamanlayıcı',
+  SCHEDULER_HELP_1: 'Komutları zamanlayarak otomatikleştirin. Benzersiz bir ad belirtin API/MQTT aracılığıyla etkinleştirmek/devre dışı bırakma',
+  SCHEDULER_HELP_2: 'Başlangıçta bir kere tetiklemek için 00:00 kullanın',
+  SCHEDULE: 'Zamanlama',
+  TIME: 'Zaman',
+  TIMER: 'Zamanlayıcı',
   ONCHANGE: 'Değişimde',
-  CONDITION: 'Durum', // TODO translate
-  IMMEDIATE: 'hemen', // TODO translate
-  SCHEDULE_UPDATED: 'Schedule updated', // TODO translate
-  SCHEDULE_TIMER_1: 'on startup', // TODO translate
-  SCHEDULE_TIMER_2: 'every minute', // TODO translate
-  SCHEDULE_TIMER_3: 'every hour', // TODO translate
-  CUSTOM_ENTITIES: 'Custom Entities', // TODO translate
-  ENTITIES_HELP_1: 'Fetch custom entities from the EMS bus', // TODO translate
-  ENTITIES_UPDATED: 'Entities Updated', // TODO translate
-  WRITEABLE: 'Writeable', // TODO translate
-  SHOWING: 'Showing', // TODO translate
-  SEARCH: 'Search', // TODO translate
-  CERT: 'TLS root certificate (leave blank for insecure)',
+  CONDITION: 'Durum',
+  IMMEDIATE: 'hemen',
+  SCHEDULE_UPDATED: 'Zamanlama güncellendi',
+  SCHEDULE_TIMER_1: 'Başlangıçta',
+  SCHEDULE_TIMER_2: 'her dakikada',
+  SCHEDULE_TIMER_3: 'her saatte',
+  CUSTOM_ENTITIES: 'Özel Varlıklar',
+  ENTITIES_HELP_1: 'Özel varlıkları EMS hattından alın',
+  ENTITIES_UPDATED: 'Varlıklar güncellendi',
+  WRITEABLE: 'Yazılabilir',
+  SHOWING: 'Görüntüleniyor',
+  SEARCH: 'Ara',
+  CERT: 'TLS kök sertifikası (güvenli olmayan için boş bırakın)',
   ENABLE_TLS: 'TLS deveye al',
-  ON: 'On', // TODO translate
-  OFF: 'Off', // TODO translate
-  POLARITY: 'Polarity', // TODO translate
-  ACTIVEHIGH: 'Active High', // TODO translate
-  ACTIVELOW: 'Active Low', // TODO translate
-  UNCHANGED: 'Unchanged', // TODO translate
-  ALWAYS: 'Always', // TODO translate
-  ACTIVITY: 'Activity', // TODO translate
-  CONFIGURE: 'Configure {0}', // TODO translate
-  SYSTEM_MEMORY: 'System Memory', // TODO translate
-  APPLICATION_SETTINGS_1: 'Modify EMS-ESP Application Settings', // TODO translate
-  SECURITY_1: 'Add or remove users', // TODO translate
-  DOWNLOAD_UPLOAD_1: 'Download and Upload Settings and Firmware', // TODO translate
-  MODULES: 'Module', // TODO translate
+  ON: 'On',
+  OFF: 'Off',
+  POLARITY: 'Polarity',
+  ACTIVEHIGH: 'Aktif Yüksek',
+  ACTIVELOW: 'Aktif Düşük',
+  UNCHANGED: 'Değiştirilmedi',
+  ALWAYS: 'Her zaman',
+  ACTIVITY: 'Faaliyet',
+  CONFIGURE: 'Yapılandır {0}',
+  SYSTEM_MEMORY: 'Sistem Belleği',
+  APPLICATION_SETTINGS_1: 'EMS-ESP Uygulama Ayarlarını Değiştir',
+  SECURITY_1: 'Kullanıcıları ekle veya kaldır',
+  DOWNLOAD_UPLOAD_1: 'Ayarları ve firmware dosyasını indir ve yükle',
+  MODULES: 'Modül',
   MODULES_1: 'Harici modülleri etkinleştirin veya devre dışı bırakın',
-  MODULES_UPDATED: 'Modules updated', // TODO translate
-  MODULES_DESCRIPTION: 'Click on the Module to activate or de-activate EMS-ESP library modules', // TODO translate
-  MODULES_NONE: 'No external modules detected', // TODO translate
-  RENAME: 'Rename', // TODO translate 
-  ENABLE_MODBUS: 'Enable Modbus', // TODO translate
-  VIEW_LOG: 'View log to diagnose issues', // TODO translate
-  UPLOAD_DRAG: 'drag and drop a file here or click to select one', // TODO translate
-  SERVICES: 'Services', // TODO translate
-  ALLVALUES: 'All Values', // TODO translate
-  SPECIAL_FUNCTIONS: 'Special Functions', // TODO translate
-  WAIT_FIRMWARE: 'Firmware is uploading and installing', // TODO translate
-  INSTALL_VERSION: 'This will install version {0}. Are you sure?', // TODO translate
-  UPGRADE_AVAILABLE: 'There is a firmware upgrade available!', // TODO translate
-  LATEST_VERSION: 'You are using the latest firmware version.', // TODO translate
-  PLEASE_WAIT: 'Please wait', // TODO translate
-  RESTARTING_PRE: 'Initializing', // TODO translate
-  RESTARTING_POST: 'Preparing', // TODO translate
-  AUTO_SCROLL: 'Auto Scroll', // TODO translate
-  DASHBOARD: 'Dashboard', // TODO translate
-  DEVELOPER_MODE: 'Developer Mode', // TODO translate
-  BYTES: 'Bytes', // TODO translate
-  BITMASK: 'Bit Mask',// TODO translate
-  DUPLICATE: 'Duplicate', // TODO translate
-  UPGRADE: 'Upgrade', // TODO translate
-  DASHBOARD_1: 'All EMS entities that are active and marked as Favorite, plus all Custom Entities, Schedules and external Sensors data are displayed below.', // TODO translate
-  NO_DATA_1: 'No favorite EMS entities found yet. Use the', // TODO translate
-  NO_DATA_2: 'module to mark them.', // TODO translate
-  NO_DATA_3: 'To see all available entities go to', // TODO translate
-  THIS_VERSION: 'This Version', // TODO translate
-  PLATFORM: 'Platform', // TODO translate
-  RELEASE_TYPE: 'Release Type', // TODO translate
-  REINSTALL: 'Re-install', // TODO translate
-  INTERNET_CONNECTION_REQUIRED: 'Internet connection required for automatic version checking and upgrading', // TODO translate
+  MODULES_UPDATED: 'Modülleri güncellendi',
+  MODULES_DESCRIPTION: 'Modüle tıklayarak etkinleştirin veya devre dışı bırakın EMS-ESP kütüphane modülleri',
+  MODULES_NONE: 'Hiçbir harici modül tespit edilmedi',
+  RENAME: 'Yeniden Adlandır',
+  ENABLE_MODBUS: 'Modbus\'ı etkinleştir',
+  VIEW_LOG: 'Sorunu tanımlamak için günlüğü görüntüleyin',
+  UPLOAD_DRAG: 'Bir dosya buraya sürükleyip bırakın veya seçmek için tıklayın',
+  SERVICES: 'Hizmetler',
+  ALLVALUES: 'Tüm Değerler',
+  SPECIAL_FUNCTIONS: 'Özel Fonksiyonlar',
+  WAIT_FIRMWARE: 'Firmware yükleniyor ve yükleniyor',
+  INSTALL_VERSION: 'Bu {0} sürümü {1} yükleyecek. Emin misiniz?',
+  UPDATE_AVAILABLE: 'güncellendi!',
+  LATEST_VERSION: 'En son {0} firmware sürümünü kullanıyorsunuz.',
+  PLEASE_WAIT: 'Lütfen bekleyin',
+  RESTARTING_PRE: 'Başlatılıyor',
+  RESTARTING_POST: 'Hazırlanıyor',
+  AUTO_SCROLL: 'Otomatik kaydırma',
+  DASHBOARD: 'Kontrol Paneli',
+  DEVELOPER_MODE: 'Geliştirici Modu',
+  BYTES: 'Bayt',
+  BITMASK: 'Bit Maskesi',
+  DUPLICATE: 'Çift',
+  DASHBOARD_1: 'Tüm aktif ve Favori olarak işaretlenmiş EMS varlıkları, artı tüm özel varlıklar, zamanlayıcılar ve harici sensör verileri aşağıda görüntüleniyor.',
+  NO_DATA_1: 'Henüz bir favori EMS varlığı bulunamadı. Kullanın',
+  NO_DATA_2: 'modülünü kullanın.',
+  NO_DATA_3: 'Tüm kullanılabilir varlıkları görmek için git',
+  THIS_VERSION: 'Bu Sürüm',
+  PLATFORM: 'Platforma',
+  RELEASE_TYPE: 'Sürüm Tipi',
+  INTERNET_CONNECTION_REQUIRED: 'Otomatik sürüm kontrolü ve güncelleme için internet bağlantısı gereklidir',
+  SWITCH_RELEASE_TYPE: '{0} sürümüne geç'
 };
 
 export default tr;

interface/vite.config.ts

@@ -1,7 +1,7 @@
 import preact from '@preact/preset-vite';
 import { visualizer } from 'rollup-plugin-visualizer';
 import { defineConfig } from 'vite';
-import viteImagemin from 'vite-plugin-imagemin';
+// import viteImagemin from 'vite-plugin-imagemin';
 import viteTsconfigPaths from 'vite-tsconfig-paths';
 
 import mockServer from '../mock-api/mockServer.js';
@@ -43,37 +43,37 @@ export default defineConfig(({ command, mode }) => {
     plugins: [
       preact(),
       viteTsconfigPaths(),
-      {
-        ...viteImagemin({
-          verbose: false,
-          gifsicle: {
-            optimizationLevel: 7,
-            interlaced: false
-          },
-          optipng: {
-            optimizationLevel: 7
-          },
-          mozjpeg: {
-            quality: 20
-          },
-          pngquant: {
-            quality: [0.8, 0.9],
-            speed: 4
-          },
-          svgo: {
-            plugins: [
-              {
-                name: 'removeViewBox'
-              },
-              {
-                name: 'removeEmptyAttrs',
-                active: false
-              }
-            ]
-          }
-        }),
-        enforce: 'pre'
-      },
+      // {
+      //   ...viteImagemin({
+      //     verbose: false,
+      //     gifsicle: {
+      //       optimizationLevel: 7,
+      //       interlaced: false
+      //     },
+      //     optipng: {
+      //       optimizationLevel: 7
+      //     },
+      //     mozjpeg: {
+      //       quality: 20
+      //     },
+      //     pngquant: {
+      //       quality: [0.8, 0.9],
+      //       speed: 4
+      //     },
+      //     svgo: {
+      //       plugins: [
+      //         {
+      //           name: 'removeViewBox'
+      //         },
+      //         {
+      //           name: 'removeEmptyAttrs',
+      //           active: false
+      //         }
+      //       ]
+      //     }
+      //   }),
+      //   enforce: 'pre'
+      // },
       visualizer({
         template: 'treemap', // or sunburst
         open: false,
@@ -108,7 +108,6 @@ export default defineConfig(({ command, mode }) => {
         keep_fnames: false,
         ie8: false,
         module: false,
-        nameCache: null,
         safari10: false,
         toplevel: false
       },

lib/PButton/PButon.cpp

@@ -54,7 +54,15 @@ bool PButton::init(uint8_t pin, bool pullMode) {
     pullMode_ = pullMode; // 1=HIGH (pullup) 0=LOW (pulldown)
 
 #if defined(ESP32)
+#if CONFIG_IDF_TARGET_ESP32
+    if (pin_ == 34 || pin_ == 35 || pin_ == 36 || pin_ == 39) {
+        pinMode(pin_, INPUT);
+    } else {
+        pinMode(pin_, pullMode ? INPUT_PULLUP : INPUT_PULLDOWN);
+    }
+#else
     pinMode(pin_, pullMode ? INPUT_PULLUP : INPUT_PULLDOWN);
+#endif
 #else // esp8266 and standalone
     pinMode(pin_, pullMode ? INPUT_PULLUP : INPUT);
 #endif
@@ -93,7 +101,15 @@ bool PButton::check(void) {
 
     // make sure the pin is still input
 #if defined(ESP32)
+#if CONFIG_IDF_TARGET_ESP32
+    if (pin_ == 34 || pin_ == 35 || pin_ == 36 || pin_ == 39) {
+        pinMode(pin_, INPUT);
+    } else {
+        pinMode(pin_, pullMode_ ? INPUT_PULLUP : INPUT_PULLDOWN);
+    }
+#else
     pinMode(pin_, pullMode_ ? INPUT_PULLUP : INPUT_PULLDOWN);
+#endif
 #else // esp8266 and standalone
     pinMode(pin_, pullMode_ ? INPUT_PULLUP : INPUT);
 #endif

lib/eModbus/library.properties

@@ -0,0 +1,9 @@
+name=eModbus
+version=1.7.4
+author=bertmelis,Miq1 <miq1@gmx.de>
+maintainer=Miq1 <miq1@gmx.de>
+sentence=eModbus provides Modbus RTU, ASCII and TCP functions for ESP32.
+paragraph=This library is non-blocking for the program using it. Modbus requests and responses will be returned to user-supplied callback functions. All Modbus function codes are supported implicitly, the codes specified by the Modbus specs are parameter-checked.
+category=Communication
+url=https://github.com/eModbus/eModbus
+architectures=esp32,FreeRTOS

lib/eModbus/src/CoilData.cpp

@@ -47,6 +47,8 @@ CoilData::~CoilData() {
 
 // Assignment operator
 CoilData& CoilData::operator=(const CoilData& m) {
+  // Avoid self-assignment
+  if (this == &m) return *this;
   // Remove old data
   if (CDbuffer) {
     delete CDbuffer;

lib/eModbus/src/ModbusBridgeTemp.h

@@ -8,6 +8,7 @@
 #include <map>
 #include <functional>
 #include "ModbusClient.h"
+#include "ModbusServer.h"
 #include "ModbusClientTCP.h"  // Needed for client.setTarget()
 #include "RTUutils.h"  // Needed for RTScallback
 
@@ -29,7 +30,7 @@ public:
   ModbusBridge();
 
   // Constructors for the RTU variant. Parameters as are for ModbusServerRTU
-  ModbusBridge(uint32_t timeout, int rtsPin = -1);
+  explicit ModbusBridge(uint32_t timeout, int rtsPin = -1);
   ModbusBridge(uint32_t timeout, RTScallback rts);
 
   // Destructor
@@ -230,42 +231,56 @@ ModbusMessage ModbusBridge<SERVERCLASS>::bridgeWorker(ModbusMessage msg) {
   uint8_t aliasID = msg.getServerID();
   uint8_t functionCode = msg.getFunctionCode();
   ModbusMessage response;
+  bool foundServer = false;
+  uint8_t usableID = 255;
 
   // Find the (alias) serverID
   if (servers.find(aliasID) != servers.end()) {
+    foundServer = true;
+    usableID = aliasID;
+  } else {
+    if (servers.find(ANY_SERVER) != servers.end()) {
+      foundServer = true;
+      usableID = ANY_SERVER;
+    }
+  }
+  if (foundServer) {
     // Found it. We may use servers[aliasID] now without allocating a new map slot
 
     // Request filter hook to be called here
-    if (servers[aliasID]->requestFilter) {
+    if (servers[usableID]->requestFilter) {
       LOG_D("Calling request filter\n");
-      msg = servers[aliasID]->requestFilter(msg);
+      msg = servers[usableID]->requestFilter(msg);
     }
 
     // Set real target server ID
-    msg.setServerID(servers[aliasID]->serverID);
-
-    // Issue the request
-    LOG_D("Request (%02X/%02X) sent\n", servers[aliasID]->serverID, msg.getFunctionCode());
-    // TCP servers have a target host/port that needs to be set in the client
-    if (servers[aliasID]->serverType == TCP_SERVER) {
-      response = reinterpret_cast<ModbusClientTCP *>(servers[aliasID]->client)->syncRequestMT(msg, (uint32_t)millis(), servers[aliasID]->host, servers[aliasID]->port);
-    } else {
-      response = servers[aliasID]->client->syncRequestM(msg, (uint32_t)millis());
+    if (servers[usableID]->serverID != ANY_SERVER) {
+      msg.setServerID(servers[usableID]->serverID);
     }
 
-    // Response filter hook to be called here
-    if (servers[aliasID]->responseFilter) {
-      LOG_D("Calling response filter\n");
-      response = servers[aliasID]->responseFilter(response);
+    // Issue the request
+    LOG_D("Request (%02X/%02X) sent\n", servers[usableID]->serverID, msg.getFunctionCode());
+    // TCP servers have a target host/port that needs to be set in the client
+    if (servers[usableID]->serverType == TCP_SERVER) {
+      response = reinterpret_cast<ModbusClientTCP *>(servers[usableID]->client)->syncRequestMT(msg, (uint32_t)micros(), servers[usableID]->host, servers[usableID]->port);
+    } else {
+      response = servers[usableID]->client->syncRequestM(msg, (uint32_t)micros());
     }
 
     // Re-set the requested server ID and function code (may have been modified by filters)
     response.setServerID(aliasID);
+
     if (response.getError() != SUCCESS) {
       response.setFunctionCode(functionCode | 0x80);
     } else {
       response.setFunctionCode(functionCode);
     }
+
+    // Response filter hook to be called here
+    if (servers[usableID]->responseFilter) {
+      LOG_D("Calling response filter\n");
+      response = servers[usableID]->responseFilter(response);
+    }
   } else {
     // If we get here, something has gone wrong internally. We send back an error response anyway.
     response.setError(aliasID, functionCode, INVALID_SERVER);

lib/eModbus/src/ModbusClient.cpp

@@ -21,6 +21,13 @@ ModbusClient::ModbusClient() :
   onError(nullptr),
   onResponse(nullptr) { instanceCounter++; }
 
+// Default destructor: reduce number of clients by one
+ModbusClient::~ModbusClient() {
+  if (instanceCounter) {
+    instanceCounter--;
+  }
+}
+
 // onDataHandler: register callback for data responses
 bool ModbusClient::onDataHandler(MBOnData handler) {
   if (onData) {

lib/eModbus/src/ModbusClient.h

@@ -37,8 +37,8 @@ public:
   uint32_t getMessageCount();             // Informative: return number of messages created
   uint32_t getErrorCount();              // Informative: return number of errors received
   void resetCounts();                    // Set both message and error counts to zero
-  inline Error addRequest(ModbusMessage m, uint32_t token) { return addRequestM(m, token); }
-  inline ModbusMessage syncRequest(ModbusMessage m, uint32_t token) { return syncRequestM(m, token); }
+  inline Error addRequest(const ModbusMessage& m, uint32_t token) { return addRequestM(m, token); }
+  inline ModbusMessage syncRequest(const ModbusMessage& m, uint32_t token) { return syncRequestM(m, token); }
 
   // Template function to generate syncRequest functions as long as there is a 
   // matching ModbusMessage::setMessage() call
@@ -85,7 +85,7 @@ public:
 
 protected:
   ModbusClient();             // Default constructor
-  virtual void isInstance() = 0;   // Make class abstract
+  virtual ~ModbusClient();            // Destructor
   ModbusMessage waitSync(uint8_t serverID, uint8_t functionCode, uint32_t token); // wait for syncRequest response to arrive
   // Virtual addRequest variant needed internally. All others done by template!
   virtual Error addRequestM(ModbusMessage msg, uint32_t token) = 0;

lib/eModbus/src/ModbusClientRTU.cpp

@@ -86,7 +86,7 @@ void ModbusClientRTU::doBegin(uint32_t baudRate, int coreID, uint32_t userInterv
   char taskName[18];
   snprintf(taskName, 18, "Modbus%02XRTU", instanceCounter);
   // Start task to handle the queue
-  xTaskCreatePinnedToCore((TaskFunction_t)&handleConnection, taskName, CLIENT_TASK_STACK, this, 6, &worker, coreID >= 0 ? coreID : NULL);
+  xTaskCreatePinnedToCore((TaskFunction_t)&handleConnection, taskName, CLIENT_TASK_STACK, this, 6, &worker, coreID >= 0 ? coreID : tskNO_AFFINITY);
 
   LOG_D("Client task %d started. Interval=%d\n", (uint32_t)worker, MR_interval);
 }
@@ -151,6 +151,7 @@ void ModbusClientRTU::clearQueue()
 {
   std::queue<RequestEntry> empty;
   LOCK_GUARD(lockGuard, qLock);
+  // Empty queue
   std::swap(requests, empty);
 }
 
@@ -342,8 +343,11 @@ void ModbusClientRTU::handleConnection(ModbusClientRTU *instance) {
       {
         // Safely lock the queue
         LOCK_GUARD(lockGuard, instance->qLock);
-        // Remove the front queue entry
-        instance->requests.pop();
+        
+        // Remove the front queue entry if the queue is not empty
+        if (!instance->requests.empty()) { 
+          instance->requests.pop();
+        }
       }
     } else {
       delay(1);

lib/eModbus/src/ModbusClientRTU.h

@@ -67,15 +67,15 @@ protected:
     uint32_t token;
     ModbusMessage msg;
     bool isSyncRequest;
-    RequestEntry(uint32_t t, ModbusMessage m, bool syncReq = false) :
+    RequestEntry(uint32_t t, const ModbusMessage& m, bool syncReq = false) :
       token(t),
       msg(m),
       isSyncRequest(syncReq) {}
   };
 
   // Base addRequest and syncRequest must be present
-  Error addRequestM(ModbusMessage msg, uint32_t token);
-  ModbusMessage syncRequestM(ModbusMessage msg, uint32_t token);
+  Error addRequestM(ModbusMessage msg, uint32_t token) override;
+  ModbusMessage syncRequestM(ModbusMessage msg, uint32_t token) override;
 
   // addToQueue: send freshly created request to queue
   bool addToQueue(uint32_t token, ModbusMessage msg, bool syncReq = false);
@@ -89,7 +89,6 @@ protected:
   // start background task
   void doBegin(uint32_t baudRate, int coreID, uint32_t userInterval);
 
-  void isInstance() { return; }   // make class instantiable
   queue<RequestEntry> requests;   // Queue to hold requests to be processed
   #if USE_MUTEX
   mutex qLock;                    // Mutex to protect queue

lib/eModbus/src/ModbusClientTCP.cpp

@@ -18,7 +18,8 @@ ModbusClientTCP::ModbusClientTCP(Client& client, uint16_t queueLimit) :
   MT_target(IPAddress(0, 0, 0, 0), 0, DEFAULTTIMEOUT, TARGETHOSTINTERVAL),
   MT_defaultTimeout(DEFAULTTIMEOUT),
   MT_defaultInterval(TARGETHOSTINTERVAL),
-  MT_qLimit(queueLimit)
+  MT_qLimit(queueLimit),
+  MT_timeoutsToClose(0)
   { }
 
 // Alternative Constructor takes reference to Client (EthernetClient or WiFiClient) plus initial target host
@@ -29,7 +30,8 @@ ModbusClientTCP::ModbusClientTCP(Client& client, IPAddress host, uint16_t port,
   MT_target(host, port, DEFAULTTIMEOUT, TARGETHOSTINTERVAL),
   MT_defaultTimeout(DEFAULTTIMEOUT),
   MT_defaultInterval(TARGETHOSTINTERVAL),
-  MT_qLimit(queueLimit)
+  MT_qLimit(queueLimit),
+  MT_timeoutsToClose(0)
   { }
 
 // Destructor: clean up queue, task etc.
@@ -64,7 +66,7 @@ void ModbusClientTCP::end() {
 // begin: start worker task
 #if IS_LINUX
 void *ModbusClientTCP::pHandle(void *p) {
-  handleConnection((ModbusClientTCP *)p);
+  handleConnection(static_cast<ModbusClientTCP *>(p));
   return nullptr;
 }
 #endif
@@ -84,7 +86,7 @@ void ModbusClientTCP::begin(int coreID) {
     char taskName[18];
     snprintf(taskName, 18, "Modbus%02XTCP", instanceCounter);
     // Start task to handle the queue
-    xTaskCreatePinnedToCore((TaskFunction_t)&handleConnection, taskName, CLIENT_TASK_STACK, this, 5, &worker, coreID >= 0 ? coreID : NULL);
+    xTaskCreatePinnedToCore((TaskFunction_t)&handleConnection, taskName, CLIENT_TASK_STACK, this, 5, &worker, coreID >= 0 ? coreID : tskNO_AFFINITY);
     LOG_D("TCP client worker %s started\n", taskName);
 #endif
   } else {
@@ -119,9 +121,25 @@ uint32_t ModbusClientTCP::pendingRequests() {
 void ModbusClientTCP::clearQueue() {
   std::queue<RequestEntry *> empty;
   LOCK_GUARD(lockGuard, qLock);
+  // Delete queue entries if still on the queue
+  while (!requests.empty()) {
+    RequestEntry *re = requests.front();
+    delete re;
+    requests.pop();
+  }
+  // Now flush the queue
   std::swap(requests, empty);
 }
 
+// Set number of timeouts to tolerate before a connection is forcibly closed.
+// 0: never, 1..255: desired number
+// Returns previous value.
+uint8_t ModbusClientTCP::closeConnectionOnTimeouts(uint8_t n) {
+  uint8_t oldValue = MT_timeoutsToClose;
+  MT_timeoutsToClose = n;
+  return oldValue;
+}
+
 // Base addRequest for preformatted ModbusMessage and last set target
 Error ModbusClientTCP::addRequestM(ModbusMessage msg, uint32_t token) {
   Error rc = SUCCESS;        // Return value
@@ -225,6 +243,7 @@ bool ModbusClientTCP::addToQueue(uint32_t token, ModbusMessage request, TargetHo
 void ModbusClientTCP::handleConnection(ModbusClientTCP *instance) {
   bool doNotPop;
   unsigned long lastRequest = millis();
+  uint16_t timeoutCount = 0;       // Run time counter of consecutive timeouts.
 
   // Loop forever - or until task is killed
   while (1) {
@@ -273,6 +292,8 @@ void ModbusClientTCP::handleConnection(ModbusClientTCP *instance) {
         // Did we get a normal response?
         if (response.getError()==SUCCESS) {
           LOG_D("Data response.\n");
+          // Reset timeout counter 
+          timeoutCount = 0;
           // Yes. Is it a synchronous request?
           if (request->isSyncRequest) {
             // Yes. Put the response into the response map
@@ -299,6 +320,25 @@ void ModbusClientTCP::handleConnection(ModbusClientTCP *instance) {
             LOCK_GUARD(responseCnt, instance->countAccessM);
             instance->errorCount++;
           }
+          // Is it a TIMEOUT and do we need to track it?
+          if (response.getError()==TIMEOUT && instance->MT_timeoutsToClose) {
+            LOG_D("Checking timeout sequence\n");
+            // Yes. First count timeout conter up
+            timeoutCount++;
+            // Is the count above the limit?
+            if (timeoutCount > instance->MT_timeoutsToClose) {
+              LOG_D("Timeouts: %d exceeding limit (%d), closing connection\n", 
+                timeoutCount, instance->MT_timeoutsToClose);
+              // Yes. We need to cut the connection
+              instance->MT_client.stop();
+              delay(1);
+              // reset timeout count
+              timeoutCount = 0;
+            }
+          } else {
+            // No TIMEOUT or no limit: reset timeout count
+            timeoutCount = 0;
+          }
           // Is it a synchronous request?
           if (request->isSyncRequest) {
             // Yes. Put the response into the response map
@@ -345,8 +385,11 @@ void ModbusClientTCP::handleConnection(ModbusClientTCP *instance) {
       {
         // Safely lock the queue
         LOCK_GUARD(lockGuard, instance->qLock);
-        // Remove the front queue entry
-        instance->requests.pop();
+
+        // Remove the front queue entry if the queue is not empty
+        if (!instance->requests.empty()) {
+          instance->requests.pop();
+        }
         // Delete request
         delete request;
         LOG_D("Request popped from queue.\n");

lib/eModbus/src/ModbusClientTCP.h

@@ -50,6 +50,11 @@ public:
   // Remove all pending request from queue
   void clearQueue();
 
+  // Set number of timeouts to tolerate before a connection is forcibly closed.
+  // 0: never, 1..255: desired number
+  // Returns previous value.
+  uint8_t closeConnectionOnTimeouts(uint8_t n=3);
+
 protected:
   // class describing a target server
   struct TargetHost {
@@ -58,7 +63,7 @@ protected:
     uint32_t      timeout;      // Time in ms waiting for a response
     uint32_t      interval;     // Time in ms to wait between requests
     
-    inline TargetHost& operator=(TargetHost& t) {
+    inline TargetHost& operator=(const TargetHost& t) {
       host = t.host;
       port = t.port;
       timeout = t.timeout;
@@ -66,7 +71,7 @@ protected:
       return *this;
     }
     
-    inline TargetHost(TargetHost& t) :
+    inline TargetHost(const TargetHost& t) :
       host(t.host),
       port(t.port),
       timeout(t.timeout),
@@ -86,13 +91,13 @@ protected:
       interval(interval)
     { }
 
-    inline bool operator==(TargetHost& t) {
+    inline bool operator==(const TargetHost& t) {
       if (host != t.host) return false;
       if (port != t.port) return false;
       return true;
     }
 
-    inline bool operator!=(TargetHost& t) {
+    inline bool operator!=(const TargetHost& t) {
       if (host != t.host) return true;
       if (port != t.port) return true;
       return false;
@@ -135,7 +140,7 @@ protected:
     }
 
   protected:
-    uint8_t headRoom[6];        // Buffer to hold MSB-first TCP header
+    uint8_t headRoom[6] = {0,0,0,0,0,0};        // Buffer to hold MSB-first TCP header
   };
 
   struct RequestEntry {
@@ -144,7 +149,7 @@ protected:
     TargetHost target;
     ModbusTCPhead head;
     bool isSyncRequest;
-    RequestEntry(uint32_t t, ModbusMessage m, TargetHost tg, bool syncReq = false) :
+    RequestEntry(uint32_t t, const ModbusMessage& m, TargetHost tg, bool syncReq = false) :
       token(t),
       msg(m),
       target(tg),
@@ -153,8 +158,8 @@ protected:
   };
 
   // Base addRequest and syncRequest must be present
-  Error addRequestM(ModbusMessage msg, uint32_t token);
-  ModbusMessage syncRequestM(ModbusMessage msg, uint32_t token);
+  Error addRequestM(ModbusMessage msg, uint32_t token) override;
+  ModbusMessage syncRequestM(ModbusMessage msg, uint32_t token) override;
   // TCP-specific addition "...MT()" including adhoc target - used by bridge 
   Error addRequestMT(ModbusMessage msg, uint32_t token, IPAddress targetHost, uint16_t targetPort);
   ModbusMessage syncRequestMT(ModbusMessage msg, uint32_t token, IPAddress targetHost, uint16_t targetPort);
@@ -174,7 +179,6 @@ protected:
   // receive: get response via Client connection
   ModbusMessage receive(RequestEntry *request);
 
-  void isInstance() { return; }   // make class instantiable
   queue<RequestEntry *> requests;   // Queue to hold requests to be processed
   #if USE_MUTEX
   mutex qLock;                    // Mutex to protect queue
@@ -185,6 +189,8 @@ protected:
   uint32_t MT_defaultTimeout;     // Standard timeout value taken if no dedicated was set
   uint32_t MT_defaultInterval;    // Standard interval value taken if no dedicated was set
   uint16_t MT_qLimit;             // Maximum number of requests to accept in queue
+  uint8_t MT_timeoutsToClose;     // 0: disregard, 1-255: number of timeouts to tolerate before
+                                  //    forcibly closing a connection.
 
   // Let any ModbusBridge class use protected members
   template<typename SERVERCLASS> friend class ModbusBridge;

lib/eModbus/src/ModbusClientTCPasync.cpp

@@ -223,19 +223,17 @@ void onAck(size_t len, uint32_t time) {
 }
 */
 void ModbusClientTCPasync::onPacket(uint8_t* data, size_t length) {
-  LOG_D("packet received (len:%d)\n", length);
+  LOG_D("packet received (len:%u)\n", length);
   // reset idle timeout
   MTA_lastActivity = millis();
 
   if (length) {
-    LOG_D("parsing (len:%d)\n", length + 1);
+    LOG_D("parsing (len:%u)\n", length + 1);
   }
   while (length > 0) {
     RequestEntry* request = nullptr;
     ModbusMessage* response = nullptr;
     uint16_t transactionID = 0;
-    uint16_t protocolID = 0;
-    uint16_t messageLength = 0;
     bool isOkay = false;
 
     // 1. Check for valid modbus message
@@ -244,8 +242,8 @@ void ModbusClientTCPasync::onPacket(uint8_t* data, size_t length) {
     // total message should fit MBAP plus remaining bytes (in data[4], data[5])
     if (length > 6) {
       transactionID = (data[0] << 8) | data[1];
-      protocolID = (data[2] << 8) | data[3];
-      messageLength = (data[4] << 8) | data[5];
+      uint16_t protocolID = (data[2] << 8) | data[3];
+      uint16_t messageLength = (data[4] << 8) | data[5];
       if (protocolID == 0 &&
         length >= (uint32_t)messageLength + 6 &&
         messageLength < 256) {

lib/eModbus/src/ModbusClientTCPasync.h

@@ -83,7 +83,7 @@ protected:
       return headRoom;
     }
 
-    inline ModbusTCPhead& operator= (ModbusTCPhead& t) {
+    inline ModbusTCPhead& operator= (const ModbusTCPhead& t) {
       transactionID = t.transactionID;
       protocolID    = t.protocolID;
       len           = t.len;
@@ -91,7 +91,7 @@ protected:
     }
 
   protected:
-    uint8_t headRoom[6];        // Buffer to hold MSB-first TCP header
+    uint8_t headRoom[6] = {0,0,0,0,0,0};        // Buffer to hold MSB-first TCP header
   };
 
   struct RequestEntry {
@@ -100,7 +100,7 @@ protected:
     ModbusTCPhead head;
     uint32_t sentTime;
     bool isSyncRequest;
-    RequestEntry(uint32_t t, ModbusMessage m, bool syncReq = false) :
+    RequestEntry(uint32_t t, const ModbusMessage& m, bool syncReq = false) :
       token(t),
       msg(m),
       head(ModbusTCPhead()),
@@ -109,8 +109,8 @@ protected:
   };
 
   // Base addRequest and syncRequest both must be present
-  Error addRequestM(ModbusMessage msg, uint32_t token);
-  ModbusMessage syncRequestM(ModbusMessage msg, uint32_t token);
+  Error addRequestM(ModbusMessage msg, uint32_t token) override;
+  ModbusMessage syncRequestM(ModbusMessage msg, uint32_t token) override;
 
   // addToQueue: send freshly created request to queue
   bool addToQueue(int32_t token, ModbusMessage request, bool syncReq = false);
@@ -121,8 +121,6 @@ protected:
   // receive: get response via Client connection
   // TCPResponse* receive(uint8_t* data, size_t length);
 
-  void isInstance() { return; }     // make class instantiable
-
   // TCP handling code, all static taking a class instancs as param
   void onConnected();
   void onDisconnected();

lib/eModbus/src/ModbusMessage.cpp

@@ -6,6 +6,7 @@
 #undef LOCAL_LOG_LEVEL
 // #define LOCAL_LOG_LEVEL LOG_LEVEL_ERROR
 #include "Logging.h"
+#include <algorithm>
 
 // Default Constructor - takes optional size of MM_data to allocate memory
 ModbusMessage::ModbusMessage(uint16_t dataLen) {
@@ -146,21 +147,19 @@ void    ModbusMessage::setServerID(uint8_t serverID) {
 }
 
 void    ModbusMessage::setFunctionCode(uint8_t FC) {
-  // We accept here that [0], [1] may allocate bytes!
-  if (MM_data.empty()) {
-    MM_data.reserve(3);  // At least an error message should fit
+   if (MM_data.size() < 2) {
+    MM_data.resize(2);    // Resize to at least 2 to ensure indices 0 and 1 are valid
+    MM_data[0] = 0;       // Optional:  Invalid server ID as a placeholder
   }
-  // No serverID set yet? use a 0 to initialize it to an error-generating value
-  if (MM_data.size() < 2) MM_data[0] = 0; // intentional invalid server ID!
-  MM_data[1] = FC;
+  MM_data[1] = FC;        // Safely set the function code
 }
 
 // add() variant to copy a buffer into MM_data. Returns updated size
 uint16_t ModbusMessage::add(const uint8_t *arrayOfBytes, uint16_t count) {
+  uint16_t originalSize = MM_data.size();
+  MM_data.resize(originalSize + count);
   // Copy it
-  while (count--) {
-    MM_data.push_back(*arrayOfBytes++);
-  }
+  std::copy(arrayOfBytes, arrayOfBytes + count, MM_data.begin() + originalSize);
   // Return updated size (logical length of message so far)
   return MM_data.size();
 }
@@ -181,7 +180,7 @@ uint8_t ModbusMessage::determineFloatOrder() {
     uint32_t i = 77230;                             // int value to go into a float without rounding error
     float f = i;                                    // assign it
     uint8_t *b = (uint8_t *)&f;                     // Pointer to bytes of f
-    uint8_t expect[floatSize] = { 0x47, 0x96, 0xd7, 0x00 }; // IEEE754 representation 
+    const uint8_t expect[floatSize] = { 0x47, 0x96, 0xd7, 0x00 }; // IEEE754 representation 
     uint8_t matches = 0;                            // number of bytes successfully matched
      
     // Loop over the bytes of the expected sequence
@@ -225,7 +224,7 @@ uint8_t ModbusMessage::determineDoubleOrder() {
     uint64_t i = 5791007487489389;                  // int64 value to go into a double without rounding error
     double f = i;                                   // assign it
     uint8_t *b = (uint8_t *)&f;                     // Pointer to bytes of f
-    uint8_t expect[doubleSize] = { 0x43, 0x34, 0x92, 0xE4, 0x00, 0x2E, 0xF5, 0x6D }; // IEEE754 representation 
+    const uint8_t expect[doubleSize] = { 0x43, 0x34, 0x92, 0xE4, 0x00, 0x2E, 0xF5, 0x6D }; // IEEE754 representation 
     uint8_t matches = 0;                            // number of bytes successfully matched
      
     // Loop over the bytes of the expected sequence
@@ -306,10 +305,7 @@ double ModbusMessage::swapDouble(double& f, int swapRule) {
 
 // add() variant for a vector of uint8_t
 uint16_t ModbusMessage::add(vector<uint8_t> v) {
-  for (auto& b: v) {
-    MM_data.push_back(b);
-  }
-  return MM_data.size();
+  return add(v.data(), v.size());
 }
 
 // add() variants for float and double values

lib/eModbus/src/ModbusServer.cpp

@@ -30,7 +30,6 @@ MBSworker ModbusServer::getWorker(uint8_t serverID, uint8_t functionCode) {
     svmap = workerMap.find(ANY_SERVER);
     if (svmap != workerMap.end()) {
       serverFound = true;
-      serverID = ANY_SERVER;
     }
   }
   // Did we find a serverID?
@@ -49,7 +48,6 @@ MBSworker ModbusServer::getWorker(uint8_t serverID, uint8_t functionCode) {
       if (fcmap != svmap->second.end()) {
         // Yes. Return the function pointer for it.
         functionCodeFound = true;
-        functionCode = ANY_FUNCTION_CODE;
       }
     }
     if (functionCodeFound) {
@@ -104,6 +102,11 @@ bool ModbusServer::isServerFor(uint8_t serverID) {
   // Is there one?
   if (svmap != workerMap.end()) {
     return true;
+  } else {
+    svmap = workerMap.find(ANY_SERVER);
+    if (svmap != workerMap.end()) {
+      return true;
+    }
   }
   return false;
 }

lib/eModbus/src/ModbusServer.h

@@ -68,15 +68,12 @@ protected:
   ModbusServer();
 
   // Destructor
-  ~ModbusServer();
+  virtual ~ModbusServer();
 
   // Prevent copy construction or assignment
   ModbusServer(ModbusServer& other) = delete;
   ModbusServer& operator=(ModbusServer& other) = delete;
 
-  // Virtual function to prevent this class being instantiated
-  virtual void isInstance() = 0;
-
   std::map<uint8_t, std::map<uint8_t, MBSworker>> workerMap;      // map on serverID->functionCode->worker function
   uint32_t messageCount;         // Number of Requests processed
   uint32_t errorCount;           // Number of errors responded

lib/eModbus/src/ModbusServerEthernet.h

@@ -15,8 +15,8 @@
 // Create own non-virtual EthernetServer class
 class EthernetServerEM : public EthernetServer {
 public:
-  EthernetServerEM(uint16_t port) : EthernetServer(port) { }
-  void begin(uint16_t port = 0) { }
+  explicit EthernetServerEM(uint16_t port) : EthernetServer(port) { }
+  void begin(uint16_t port = 0) override { }
 };
 
 #include "ModbusServerTCPtemp.h"

lib/eModbus/src/ModbusServerRTU.cpp

@@ -94,7 +94,7 @@ void ModbusServerRTU::doBegin(uint32_t baudRate, int coreID, uint32_t userInterv
   snprintf(taskName, 18, "MBsrv%02XRTU", instanceCounter);
 
   // Start task to handle the client
-  xTaskCreatePinnedToCore((TaskFunction_t)&serve, taskName, SERVER_TASK_STACK, this, 8, &serverTask, coreID >= 0 ? coreID : NULL);
+  xTaskCreatePinnedToCore((TaskFunction_t)&serve, taskName, SERVER_TASK_STACK, this, 8, &serverTask, coreID >= 0 ? coreID : tskNO_AFFINITY);
 
   LOG_D("Server task %d started. Interval=%d\n", (uint32_t)serverTask, MSRinterval);
 }
@@ -126,6 +126,12 @@ bool ModbusServerRTU::isModbusASCII() {
   return MSRuseASCII;
 }
 
+// set timeout
+void ModbusServerRTU::setModbusTimeout(unsigned long timeout)
+{
+  serverTimeout = timeout;
+}
+
 // Toggle skipping of leading 0x00 byte
 void ModbusServerRTU::skipLeading0x00(bool onOff) {
   MSRskipLeadingZeroByte = onOff;
@@ -231,8 +237,8 @@ void ModbusServerRTU::serve(ModbusServerRTU *myServer) {
             response = m;
           }
         } else {
-          // No callback. Is at least the serverID valid and no broadcast?
-          if (myServer->isServerFor(request[0]) && request[0] != 0x00) {
+          // No callback. Is at least the serverID valid?
+          if (myServer->isServerFor(request[0])) {
             // Yes. Send back a ILLEGAL_FUNCTION error
             response.setError(request.getServerID(), request.getFunctionCode(), ILLEGAL_FUNCTION);
           }

lib/eModbus/src/ModbusServerRTU.h

@@ -47,6 +47,9 @@ public:
   // Inquire protocol mode
   bool isModbusASCII();
 
+  // set timeout
+  void setModbusTimeout(unsigned long timeout);
+
   // Toggle skipping of leading 0x00 byte
   void skipLeading0x00(bool onOff = true);
 
@@ -61,8 +64,6 @@ protected:
   ModbusServerRTU(ModbusServerRTU& m) = delete;
   ModbusServerRTU& operator=(ModbusServerRTU& m) = delete;
 
-  inline void isInstance() { }           // Make class instantiable
-
   // internal common begin function
   void doBegin(uint32_t baudRate, int coreID, uint32_t userInterval);
 

lib/eModbus/src/ModbusServerTCPasync.cpp

@@ -32,7 +32,7 @@ ModbusServerTCPasync::mb_client::~mb_client() {
 
 void ModbusServerTCPasync::mb_client::onData(uint8_t* data, size_t len) {
   lastActiveTime = millis();
-  LOG_D("data len %d\n", len);
+  LOG_D("data len %u\n", len);
 
   Error error = SUCCESS;
   size_t i = 0;
@@ -250,7 +250,7 @@ void ModbusServerTCPasync::onClientConnect(AsyncClient* client) {
   LOCK_GUARD(lock1, cListLock);
   if (clients.size() < maxNoClients) {
     clients.emplace_back(new mb_client(this, client));
-    LOG_D("nr clients: %d\n", clients.size());
+    LOG_D("nr clients: %u\n", clients.size());
   } else {
     LOG_D("max number of clients reached, closing new\n");
     client->close(true);
@@ -264,5 +264,5 @@ void ModbusServerTCPasync::onClientDisconnect(mb_client* client) {
   clients.remove_if([client](mb_client* i) { return i->client == client->client; });
   // delete client itself
   delete client;
-  LOG_D("nr clients: %d\n", clients.size());
+  LOG_D("nr clients: %u\n", clients.size());
 }

lib/eModbus/src/ModbusServerTCPasync.h

@@ -76,7 +76,6 @@ class ModbusServerTCPasync : public ModbusServer {
   bool isRunning();
 
  protected:
-  inline void isInstance() { }
   void onClientConnect(AsyncClient* client);
   void onClientDisconnect(mb_client* client);
 

lib/eModbus/src/ModbusServerTCPtemp.h

@@ -44,8 +44,6 @@ protected:
   ModbusServerTCP(ModbusServerTCP& m) = delete;
   ModbusServerTCP& operator=(ModbusServerTCP& m) = delete;
 
-  inline void isInstance() { }
-
   uint8_t numClients;
   TaskHandle_t serverTask;
   uint16_t serverPort;
@@ -159,7 +157,7 @@ template <typename ST, typename CT>
     snprintf(taskName, 18, "MBserve%04X", port);
 
     // Start task to handle the client
-    xTaskCreatePinnedToCore((TaskFunction_t)&serve, taskName, SERVER_TASK_STACK, this, 5, &serverTask, coreID >= 0 ? coreID : NULL);
+    xTaskCreatePinnedToCore((TaskFunction_t)&serve, taskName, SERVER_TASK_STACK, this, 5, &serverTask, coreID >= 0 ? coreID : tskNO_AFFINITY);
     LOG_D("Server task %s started (%d).\n", taskName, (uint32_t)serverTask);
 
     // Wait two seconds for it to establish
@@ -206,7 +204,7 @@ bool ModbusServerTCP<ST, CT>::accept(CT& client, uint32_t timeout, int coreID) {
       snprintf(taskName, 18, "MBsrv%02Xclnt", i);
 
       // Start task to handle the client
-      xTaskCreatePinnedToCore((TaskFunction_t)&worker, taskName, SERVER_TASK_STACK, clients[i], 5, &clients[i]->task, coreID >= 0 ? coreID : NULL);
+      xTaskCreatePinnedToCore((TaskFunction_t)&worker, taskName, SERVER_TASK_STACK, clients[i], 5, &clients[i]->task, coreID >= 0 ? coreID : tskNO_AFFINITY);
       LOG_D("Started client %d task %d\n", i, (uint32_t)(clients[i]->task));
 
       return true;

lib/eModbus/src/ModbusTypeDefs.h

@@ -109,8 +109,8 @@ const uint8_t swapTables[8][8] = {
 enum FCType : uint8_t {
   FC01_TYPE,         // Two uint16_t parameters (FC 0x01, 0x02, 0x03, 0x04, 0x05, 0x06)
   FC07_TYPE,         // no additional parameter (FCs 0x07, 0x0b, 0x0c, 0x11)
-  FC0F_TYPE,         // two uint16_t parameters, a uint8_t length byte and a uint16_t* pointer to array of bytes (FC 0x0f)
-  FC10_TYPE,         // two uint16_t parameters, a uint8_t length byte and a uint8_t* pointer to array of words (FC 0x10)
+  FC0F_TYPE,         // two uint16_t parameters, a uint8_t length byte and a uint8_t* pointer to array of bytes (FC 0x0f)
+  FC10_TYPE,         // two uint16_t parameters, a uint8_t length byte and a uint16_t* pointer to array of words (FC 0x10)
   FC16_TYPE,         // three uint16_t parameters (FC 0x16)
   FC18_TYPE,         // one uint16_t parameter (FC 0x18)
   FCGENERIC,         // for FCs not yet explicitly coded (or too complex)

lib/eModbus/src/RTUutils.cpp

@@ -3,13 +3,13 @@
 //               MIT license - see license.md for details
 // =================================================================================================
 #include "options.h"
+#if HAS_FREERTOS
 #include "ModbusMessage.h"
 #include "RTUutils.h"
 #undef LOCAL_LOG_LEVEL
 // #define LOCAL_LOG_LEVEL LOG_LEVEL_VERBOSE
 #include "Logging.h"
 
-#if HAS_FREERTOS
 // calcCRC: calculate Modbus CRC16 on a given array of bytes
 uint16_t RTUutils::calcCRC(const uint8_t *data, uint16_t len) {
   // CRC16 pre-calculated tables
@@ -57,10 +57,9 @@ uint16_t RTUutils::calcCRC(const uint8_t *data, uint16_t len) {
 
   uint8_t crcHi = 0xFF;
   uint8_t crcLo = 0xFF;
-  uint8_t index;
 
   while (len--) {
-    index = crcLo ^ *data++;
+    uint8_t index = crcLo ^ *data++;
     crcLo = crcHi ^ crcHiTable[index];
     crcHi = crcLoTable[index];
   }
@@ -464,4 +463,5 @@ const char RTUutils::ASCIIread[] = {
 const char RTUutils::ASCIIwrite[] = { 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 
                                       0x38, 0x39, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46 
 };
+
 #endif

lib/eModbus/src/RTUutils.h

@@ -5,9 +5,6 @@
 #ifndef _RTU_UTILS_H
 #define _RTU_UTILS_H
 #include <stdint.h>
-#if NEED_UART_PATCH
-#include <soc/uart_struct.h>
-#endif
 #include <vector>
 #include "Stream.h"
 #include "ModbusTypeDefs.h"
@@ -52,11 +49,13 @@ public:
 // RTSauto: dummy callback for auto half duplex RS485 boards
   inline static void RTSauto(bool level) { return; } // NOLINT
 
+#if HAS_FREERTOS
 // Necessary preparations for a HardwareSerial
 static void prepareHardwareSerial(HardwareSerial& s, uint16_t bufferSize = 260) {
   s.setRxBufferSize(bufferSize);
   s.setTxBufferSize(bufferSize);
 }
+#endif
 
 protected:
 // Printable characters for ASCII protocol: 012345678ABCDEF

lib/eModbus/src/options.h

@@ -12,7 +12,6 @@
 #define HAS_FREERTOS 1
 #define HAS_ETHERNET 1
 #define IS_LINUX 0
-#define NEED_UART_PATCH 1
 const unsigned int SERVER_TASK_STACK = 4096;
 const unsigned int CLIENT_TASK_STACK = 4096;
 
@@ -23,7 +22,6 @@ const unsigned int CLIENT_TASK_STACK = 4096;
 #define HAS_FREERTOS 0
 #define HAS_ETHERNET 0
 #define IS_LINUX 0
-#define NEED_UART_PATCH 0
 
 /* === LINUX DEFINITIONS AND MACROS === */
 #elif defined(__linux__)
@@ -31,7 +29,6 @@ const unsigned int CLIENT_TASK_STACK = 4096;
 #define HAS_FREERTOS 0
 #define HAS_ETHERNET 0
 #define IS_LINUX 1
-#define NEED_UART_PATCH 0
 #include <cstdio>  // for printf()
 #include <cstring> // for memcpy(), strlen() etc.
 #include <cinttypes> // for uint32_t etc.

lib/espMqttClient/src/MqttClient.cpp

@@ -74,7 +74,7 @@ MqttClient::MqttClient(espMqttClientTypes::UseInternalTask useInternalTask, uint
 
 MqttClient::~MqttClient() {
   disconnect(true);
-  _clearQueue(2);
+  clearQueue(true);
 #if defined(ARDUINO_ARCH_ESP32)
   vSemaphoreDelete(_xSemaphore);
   if (_useInternalTask == espMqttClientTypes::UseInternalTask::YES) {

lib/uuid-console/src/shell_log.cpp

@@ -106,7 +106,15 @@ void Shell::output_logs() {
     }
 
     while (1) {
-        print(uuid::log::format_timestamp_ms(message.content_->uptime_ms, 3));
+        time_t offset = time(nullptr) - uuid::get_uptime_sec();
+        if (offset < 1500000000L) {
+            print(uuid::log::format_timestamp_ms(message.content_->uptime_ms, 3));
+        } else {
+            time_t t1 = offset + (time_t)(message.content_->uptime_ms / 1000);
+            char   timestr[25];
+            strftime(timestr, 25, "%FT%T", localtime(&t1));
+            printf("%s.%03d", timestr, (uint16_t)(message.content_->uptime_ms % 1000));
+        }
         printf(" %c %lu: [%s] ", uuid::log::format_level_char(message.content_->level), message.id_, message.content_->name);
 
         if ((message.content_->level == uuid::log::Level::ERR) || (message.content_->level == uuid::log::Level::WARNING)) {

lib/uuid-syslog/src/syslog.cpp

@@ -122,7 +122,6 @@ void SyslogService::remove_queued_messages(uuid::log::Level level) {
     }
 
     log_message_id_ -= offset;
-    log_message_fails_ += offset;
 }
 
 void SyslogService::log_level(uuid::log::Level level) {

lib_standalone/Arduino.cpp

@@ -147,5 +147,6 @@ double ledcSetup(uint8_t chan, double freq, uint8_t bit_num) {
 void ledcAttachPin(uint8_t pin, uint8_t chan) {};
 void ledcWrite(uint8_t chan, uint32_t duty) {};
 void neopixelWrite(uint8_t pin, uint8_t red_val, uint8_t green_val, uint8_t blue_val) {};
+void rgbLedWrite(uint8_t pin, uint8_t red_val, uint8_t green_val, uint8_t blue_val) {};
 
 #endif

lib_standalone/Arduino.h

@@ -72,6 +72,7 @@ double ledcSetup(uint8_t chan, double freq, uint8_t bit_num);
 void   ledcAttachPin(uint8_t pin, uint8_t chan);
 void   ledcWrite(uint8_t chan, uint32_t duty);
 void   neopixelWrite(uint8_t pin, uint8_t red_val, uint8_t green_val, uint8_t blue_val);
+void   rgbLedWrite(uint8_t pin, uint8_t red_val, uint8_t green_val, uint8_t blue_val);
 
 #define PROGMEM
 #define PGM_P const char *

lib_standalone/ESP32React.h

@@ -75,8 +75,8 @@ class DummySettings {
     uint8_t  provisionMode      = 0;
     uint32_t publish_time_water = 0;
 
-    static void read(DummySettings & settings, JsonObject root) {};
-    static void read(DummySettings & settings) {};
+    static void read(DummySettings & settings, JsonObject root){};
+    static void read(DummySettings & settings){};
 
     static StateUpdateResult update(JsonObject root, DummySettings & settings) {
         return StateUpdateResult::CHANGED;
@@ -85,7 +85,7 @@ class DummySettings {
 
 class DummySettingsService : public StatefulService<DummySettings> {
   public:
-    DummySettingsService(AsyncWebServer * server, FS * fs, SecurityManager * securityManager) {};
+    DummySettingsService(AsyncWebServer * server, FS * fs, SecurityManager * securityManager){};
 
     void begin();
     void loop();
@@ -101,12 +101,12 @@ class ESP32React {
   public:
     ESP32React(AsyncWebServer * server, FS * fs)
         : _settings(server, fs, nullptr)
-        , _securitySettingsService(server, fs) {};
+        , _securitySettingsService(server, fs){};
 
     void begin() {
         _mqttClient = new espMqttClient();
     };
-    void loop() {};
+    void loop(){};
 
     SecurityManager * getSecurityManager() {
         return &_securitySettingsService;

lib_standalone/ESPAsyncWebServer.h

@@ -243,6 +243,9 @@ class AsyncWebServer {
     void on(const char * uri, WebRequestMethodComposite method, ArRequestHandlerFunction onRequest) {};
 };
 
+#ifndef SSE_MAX_QUEUED_MESSAGES
+#define SSE_MAX_QUEUED_MESSAGES 32
+#endif
 
 class AsyncEventSource : public AsyncWebHandler {
   public:
@@ -252,6 +255,9 @@ class AsyncEventSource : public AsyncWebHandler {
     size_t count() const {
         return 1;
     }
+    size_t avgPacketsWaiting() const {
+        return 0;
+    };
 
     void send(const char * message, const char * event = NULL, uint32_t id = 0, uint32_t reconnect = 0) {};
 };

mock-api/.gitattributes

@@ -1,4 +0,0 @@
-/.yarn/**            linguist-vendored
-/.yarn/releases/*    binary
-/.yarn/plugins/**/*  binary
-/.pnp.*              binary linguist-generated

mock-api/.yarnrc.yml

@@ -1,3 +0,0 @@
-nodeLinker: node-modules
-
-yarnPath: .yarn/releases/yarn-4.7.0.cjs

mock-api/README.md

@@ -3,10 +3,11 @@ When developing and testing the web interface, it's handy not to bother with re-
 # prerequisites
 
 - Install the latest LTS of NodeJS
-- Install yarn (`npm install -g yarn`)
+- install corepack `npm install -g corepack@latest` and `orepack enable`
+- Install pnpm (`corepack use pnpm@latest-10` on linux or `winget install -e --id pnpm.pnpm` on windows). See <https://pnpm.io/installation>
 - Install bun (<https://bun.sh/docs/installation>)
-- type `yarn` from this `mock-api` folder to build
+- type `pnpm install` from this `mock-api` folder to build
 
 # To run
 
-- `yarn standalone` from the main `interface` folder and then navigate to <http://localhost:3000>
+- `pnpm standalone` from the main `interface` folder and then navigate to <http://localhost:3000>

mock-api/package.json

@@ -5,15 +5,15 @@
   "author": "proddy, emsesp.org",
   "license": "MIT",
   "scripts": {
-    "mock-rest": "bun --watch rest_server.ts",
+    "mock-rest": "bun --watch restServer.ts",
     "format": "prettier -l -w '**/*.{ts,tsx,js,css,json,md}'"
   },
   "dependencies": {
-    "@msgpack/msgpack": "^3.1.1",
+    "@msgpack/msgpack": "^3.1.2",
     "@trivago/prettier-plugin-sort-imports": "^5.2.2",
-    "formidable": "^3.5.2",
-    "itty-router": "^5.0.18",
-    "prettier": "^3.5.3"
+    "formidable": "^3.5.4",
+    "itty-router": "^5.0.22",
+    "prettier": "^3.6.2"
   },
-  "packageManager": "yarn@4.7.0"
+  "packageManager": "pnpm@10.18.1+sha512.77a884a165cbba2d8d1c19e3b4880eee6d2fcabd0d879121e282196b80042351d5eb3ca0935fa599da1dc51265cc68816ad2bddd2a2de5ea9fdf92adbec7cd34"
 }

mock-api/pnpm-lock.yaml

@@ -0,0 +1,279 @@
+lockfileVersion: '9.0'
+
+settings:
+  autoInstallPeers: true
+  excludeLinksFromLockfile: false
+
+importers:
+
+  .:
+    dependencies:
+      '@msgpack/msgpack':
+        specifier: ^3.1.2
+        version: 3.1.2
+      '@trivago/prettier-plugin-sort-imports':
+        specifier: ^5.2.2
+        version: 5.2.2(prettier@3.6.2)
+      formidable:
+        specifier: ^3.5.4
+        version: 3.5.4
+      itty-router:
+        specifier: ^5.0.22
+        version: 5.0.22
+      prettier:
+        specifier: ^3.6.2
+        version: 3.6.2
+
+packages:
+
+  '@babel/code-frame@7.27.1':
+    resolution: {integrity: sha512-cjQ7ZlQ0Mv3b47hABuTevyTuYN4i+loJKGeV9flcCgIK37cCXRh+L1bd3iBHlynerhQ7BhCkn2BPbQUL+rGqFg==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/generator@7.28.3':
+    resolution: {integrity: sha512-3lSpxGgvnmZznmBkCRnVREPUFJv2wrv9iAoFDvADJc0ypmdOxdUtcLeBgBJ6zE0PMeTKnxeQzyk0xTBq4Ep7zw==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/helper-globals@7.28.0':
+    resolution: {integrity: sha512-+W6cISkXFa1jXsDEdYA8HeevQT/FULhxzR99pxphltZcVaugps53THCeiWA8SguxxpSp3gKPiuYfSWopkLQ4hw==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/helper-string-parser@7.27.1':
+    resolution: {integrity: sha512-qMlSxKbpRlAridDExk92nSobyDdpPijUq2DW6oDnUqd0iOGxmQjyqhMIihI9+zv4LPyZdRje2cavWPbCbWm3eA==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/helper-validator-identifier@7.27.1':
+    resolution: {integrity: sha512-D2hP9eA+Sqx1kBZgzxZh0y1trbuU+JoDkiEwqhQ36nodYqJwyEIhPSdMNd7lOm/4io72luTPWH20Yda0xOuUow==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/parser@7.28.4':
+    resolution: {integrity: sha512-yZbBqeM6TkpP9du/I2pUZnJsRMGGvOuIrhjzC1AwHwW+6he4mni6Bp/m8ijn0iOuZuPI2BfkCoSRunpyjnrQKg==}
+    engines: {node: '>=6.0.0'}
+    hasBin: true
+
+  '@babel/template@7.27.2':
+    resolution: {integrity: sha512-LPDZ85aEJyYSd18/DkjNh4/y1ntkE5KwUHWTiqgRxruuZL2F1yuHligVHLvcHY2vMHXttKFpJn6LwfI7cw7ODw==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/traverse@7.28.4':
+    resolution: {integrity: sha512-YEzuboP2qvQavAcjgQNVgsvHIDv6ZpwXvcvjmyySP2DIMuByS/6ioU5G9pYrWHM6T2YDfc7xga9iNzYOs12CFQ==}
+    engines: {node: '>=6.9.0'}
+
+  '@babel/types@7.28.4':
+    resolution: {integrity: sha512-bkFqkLhh3pMBUQQkpVgWDWq/lqzc2678eUyDlTBhRqhCHFguYYGM0Efga7tYk4TogG/3x0EEl66/OQ+WGbWB/Q==}
+    engines: {node: '>=6.9.0'}
+
+  '@jridgewell/gen-mapping@0.3.13':
+    resolution: {integrity: sha512-2kkt/7niJ6MgEPxF0bYdQ6etZaA+fQvDcLKckhy1yIQOzaoKjBBjSj63/aLVjYE3qhRt5dvM+uUyfCg6UKCBbA==}
+
+  '@jridgewell/resolve-uri@3.1.2':
+    resolution: {integrity: sha512-bRISgCIjP20/tbWSPWMEi54QVPRZExkuD9lJL+UIxUKtwVJA8wW1Trb1jMs1RFXo1CBTNZ/5hpC9QvmKWdopKw==}
+    engines: {node: '>=6.0.0'}
+
+  '@jridgewell/sourcemap-codec@1.5.5':
+    resolution: {integrity: sha512-cYQ9310grqxueWbl+WuIUIaiUaDcj7WOq5fVhEljNVgRfOUhY9fy2zTvfoqWsnebh8Sl70VScFbICvJnLKB0Og==}
+
+  '@jridgewell/trace-mapping@0.3.31':
+    resolution: {integrity: sha512-zzNR+SdQSDJzc8joaeP8QQoCQr8NuYx2dIIytl1QeBEZHJ9uW6hebsrYgbz8hJwUQao3TWCMtmfV8Nu1twOLAw==}
+
+  '@msgpack/msgpack@3.1.2':
+    resolution: {integrity: sha512-JEW4DEtBzfe8HvUYecLU9e6+XJnKDlUAIve8FvPzF3Kzs6Xo/KuZkZJsDH0wJXl/qEZbeeE7edxDNY3kMs39hQ==}
+    engines: {node: '>= 18'}
+
+  '@noble/hashes@1.8.0':
+    resolution: {integrity: sha512-jCs9ldd7NwzpgXDIf6P3+NrHh9/sD6CQdxHyjQI+h/6rDNo88ypBxxz45UDuZHz9r3tNz7N/VInSVoVdtXEI4A==}
+    engines: {node: ^14.21.3 || >=16}
+
+  '@paralleldrive/cuid2@2.2.2':
+    resolution: {integrity: sha512-ZOBkgDwEdoYVlSeRbYYXs0S9MejQofiVYoTbKzy/6GQa39/q5tQU2IX46+shYnUkpEl3wc+J6wRlar7r2EK2xA==}
+
+  '@trivago/prettier-plugin-sort-imports@5.2.2':
+    resolution: {integrity: sha512-fYDQA9e6yTNmA13TLVSA+WMQRc5Bn/c0EUBditUHNfMMxN7M82c38b1kEggVE3pLpZ0FwkwJkUEKMiOi52JXFA==}
+    engines: {node: '>18.12'}
+    peerDependencies:
+      '@vue/compiler-sfc': 3.x
+      prettier: 2.x - 3.x
+      prettier-plugin-svelte: 3.x
+      svelte: 4.x || 5.x
+    peerDependenciesMeta:
+      '@vue/compiler-sfc':
+        optional: true
+      prettier-plugin-svelte:
+        optional: true
+      svelte:
+        optional: true
+
+  asap@2.0.6:
+    resolution: {integrity: sha512-BSHWgDSAiKs50o2Re8ppvp3seVHXSRM44cdSsT9FfNEUUZLOGWVCsiWaRPWM1Znn+mqZ1OfVZ3z3DWEzSp7hRA==}
+
+  debug@4.4.3:
+    resolution: {integrity: sha512-RGwwWnwQvkVfavKVt22FGLw+xYSdzARwm0ru6DhTVA3umU5hZc28V3kO4stgYryrTlLpuvgI9GiijltAjNbcqA==}
+    engines: {node: '>=6.0'}
+    peerDependencies:
+      supports-color: '*'
+    peerDependenciesMeta:
+      supports-color:
+        optional: true
+
+  dezalgo@1.0.4:
+    resolution: {integrity: sha512-rXSP0bf+5n0Qonsb+SVVfNfIsimO4HEtmnIpPHY8Q1UCzKlQrDMfdobr8nJOOsRgWCyMRqeSBQzmWUMq7zvVig==}
+
+  formidable@3.5.4:
+    resolution: {integrity: sha512-YikH+7CUTOtP44ZTnUhR7Ic2UASBPOqmaRkRKxRbywPTe5VxF7RRCck4af9wutiZ/QKM5nME9Bie2fFaPz5Gug==}
+    engines: {node: '>=14.0.0'}
+
+  itty-router@5.0.22:
+    resolution: {integrity: sha512-9hmdGErWdYDOurGYxSbqLhy4EFReIwk71hMZTJ5b+zfa2zjMNV1ftFno2b8VjAQvX615gNB8Qxbl9JMRqHnIVA==}
+
+  javascript-natural-sort@0.7.1:
+    resolution: {integrity: sha512-nO6jcEfZWQXDhOiBtG2KvKyEptz7RVbpGP4vTD2hLBdmNQSsCiicO2Ioinv6UI4y9ukqnBpy+XZ9H6uLNgJTlw==}
+
+  js-tokens@4.0.0:
+    resolution: {integrity: sha512-RdJUflcE3cUzKiMqQgsCu06FPu9UdIJO0beYbPhHN4k6apgJtifcoCtT9bcxOpYBtpD2kCM6Sbzg4CausW/PKQ==}
+
+  jsesc@3.1.0:
+    resolution: {integrity: sha512-/sM3dO2FOzXjKQhJuo0Q173wf2KOo8t4I8vHy6lF9poUp7bKT0/NHE8fPX23PwfhnykfqnC2xRxOnVw5XuGIaA==}
+    engines: {node: '>=6'}
+    hasBin: true
+
+  lodash@4.17.21:
+    resolution: {integrity: sha512-v2kDEe57lecTulaDIuNTPy3Ry4gLGJ6Z1O3vE1krgXZNrsQ+LFTGHVxVjcXPs17LhbZVGedAJv8XZ1tvj5FvSg==}
+
+  ms@2.1.3:
+    resolution: {integrity: sha512-6FlzubTLZG3J2a/NVCAleEhjzq5oxgHyaCU9yYXvcLsvoVaHJq/s5xXI6/XXP6tz7R9xAOtHnSO/tXtF3WRTlA==}
+
+  once@1.4.0:
+    resolution: {integrity: sha512-lNaJgI+2Q5URQBkccEKHTQOPaXdUxnZZElQTZY0MFUAuaEqe1E+Nyvgdz/aIyNi6Z9MzO5dv1H8n58/GELp3+w==}
+
+  picocolors@1.1.1:
+    resolution: {integrity: sha512-xceH2snhtb5M9liqDsmEw56le376mTZkEX/jEb/RxNFyegNul7eNslCXP9FDj/Lcu0X8KEyMceP2ntpaHrDEVA==}
+
+  prettier@3.6.2:
+    resolution: {integrity: sha512-I7AIg5boAr5R0FFtJ6rCfD+LFsWHp81dolrFD8S79U9tb8Az2nGrJncnMSnys+bpQJfRUzqs9hnA81OAA3hCuQ==}
+    engines: {node: '>=14'}
+    hasBin: true
+
+  wrappy@1.0.2:
+    resolution: {integrity: sha512-l4Sp/DRseor9wL6EvV2+TuQn63dMkPjZ/sp9XkghTEbV9KlPS1xUsZ3u7/IQO4wxtcFB4bgpQPRcR3QCvezPcQ==}
+
+snapshots:
+
+  '@babel/code-frame@7.27.1':
+    dependencies:
+      '@babel/helper-validator-identifier': 7.27.1
+      js-tokens: 4.0.0
+      picocolors: 1.1.1
+
+  '@babel/generator@7.28.3':
+    dependencies:
+      '@babel/parser': 7.28.4
+      '@babel/types': 7.28.4
+      '@jridgewell/gen-mapping': 0.3.13
+      '@jridgewell/trace-mapping': 0.3.31
+      jsesc: 3.1.0
+
+  '@babel/helper-globals@7.28.0': {}
+
+  '@babel/helper-string-parser@7.27.1': {}
+
+  '@babel/helper-validator-identifier@7.27.1': {}
+
+  '@babel/parser@7.28.4':
+    dependencies:
+      '@babel/types': 7.28.4
+
+  '@babel/template@7.27.2':
+    dependencies:
+      '@babel/code-frame': 7.27.1
+      '@babel/parser': 7.28.4
+      '@babel/types': 7.28.4
+
+  '@babel/traverse@7.28.4':
+    dependencies:
+      '@babel/code-frame': 7.27.1
+      '@babel/generator': 7.28.3
+      '@babel/helper-globals': 7.28.0
+      '@babel/parser': 7.28.4
+      '@babel/template': 7.27.2
+      '@babel/types': 7.28.4
+      debug: 4.4.3
+    transitivePeerDependencies:
+      - supports-color
+
+  '@babel/types@7.28.4':
+    dependencies:
+      '@babel/helper-string-parser': 7.27.1
+      '@babel/helper-validator-identifier': 7.27.1
+
+  '@jridgewell/gen-mapping@0.3.13':
+    dependencies:
+      '@jridgewell/sourcemap-codec': 1.5.5
+      '@jridgewell/trace-mapping': 0.3.31
+
+  '@jridgewell/resolve-uri@3.1.2': {}
+
+  '@jridgewell/sourcemap-codec@1.5.5': {}
+
+  '@jridgewell/trace-mapping@0.3.31':
+    dependencies:
+      '@jridgewell/resolve-uri': 3.1.2
+      '@jridgewell/sourcemap-codec': 1.5.5
+
+  '@msgpack/msgpack@3.1.2': {}
+
+  '@noble/hashes@1.8.0': {}
+
+  '@paralleldrive/cuid2@2.2.2':
+    dependencies:
+      '@noble/hashes': 1.8.0
+
+  '@trivago/prettier-plugin-sort-imports@5.2.2(prettier@3.6.2)':
+    dependencies:
+      '@babel/generator': 7.28.3
+      '@babel/parser': 7.28.4
+      '@babel/traverse': 7.28.4
+      '@babel/types': 7.28.4
+      javascript-natural-sort: 0.7.1
+      lodash: 4.17.21
+      prettier: 3.6.2
+    transitivePeerDependencies:
+      - supports-color
+
+  asap@2.0.6: {}
+
+  debug@4.4.3:
+    dependencies:
+      ms: 2.1.3
+
+  dezalgo@1.0.4:
+    dependencies:
+      asap: 2.0.6
+      wrappy: 1.0.2
+
+  formidable@3.5.4:
+    dependencies:
+      '@paralleldrive/cuid2': 2.2.2
+      dezalgo: 1.0.4
+      once: 1.4.0
+
+  itty-router@5.0.22: {}
+
+  javascript-natural-sort@0.7.1: {}
+
+  js-tokens@4.0.0: {}
+
+  jsesc@3.1.0: {}
+
+  lodash@4.17.21: {}
+
+  ms@2.1.3: {}
+
+  once@1.4.0:
+    dependencies:
+      wrappy: 1.0.2
+
+  picocolors@1.1.1: {}
+
+  prettier@3.6.2: {}
+
+  wrappy@1.0.2: {}