# Changelog All notable changes to this project will be documented in this file. The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html). # [3.1.1] June 26 2021 ## Changed - new command called `commands` which lists all available commands. `ems-esp/api/{device}/commands` - More Home Assistant icons to match the UOMs - new API. Using secure access tokens and OpenAPI standard. See `doc/EMS-ESP32 API.md` and [#50](https://github.com/emsesp/EMS-ESP32/issues/50) - show log messages in Web UI [#71](https://github.com/emsesp/EMS-ESP32/issues/71) ## Fixed - HA thermostat mode was not in sync with actual mode [#66](https://github.com/emsesp/EMS-ESP32/issues/66) - Don't publish rssi if Wifi is disabled and ethernet is being used - Booleans are shown as true/false in API GETs ## Changed - `info` command always shows full names in API. For short names query the device or name directly, e.g. `http://ems-esp/api/boiler` - free memory is shown in kilobytes - boiler's warm water entities have ww added to the Home Assistant entity name [#67](https://github.com/emsesp/EMS-ESP32/issues/67) - improved layout and rendering of device values in the WebUI, also the edit value screen # [3.1.0] May 4 2021 ## Changed - Mock API to simulate an ESP, for testing web - Able to write values from the Web UI - check values with `"cmd":` and data empty or `?` - set hc for values and commands by id or prefix `hc`+separator, separator can be any char ## Fixed - Don't create Home Assistant MQTT discovery entries for device values that don't exists (#756 on EMS-ESP repo) - Update shower MQTT when a shower start is detected - S32 board profile ## Changed - Icon for Network - MQTT Formatting payload (nested vs single) is a pull-down option - moved mqtt-topics and texts to local_EN, all topics lower case - Re-enabled Shower Alert (still experimental) - lowercased Flow temp in commands - system console commands to main # [3.0.1] March 30 2021 ## Added - power settings, disabling BLE and turning off Wifi sleep - Rx and Tx counts to Heartbeat MQTT payload - ethernet support - id to info command to show only a heatingcircuit - add sending devices that are not listed to 0x07 - extra MQTT boolean option for "ON" and "OFF" - support for chunked MQTT payloads to allow large data sets > 2kb - external Button support (#708) for resetting to factory defaults and other actions - new console set command in `system`, `set board_profile ` for quickly enabling cabled ethernet connections without using the captive wifi portal - added in MQTT nested mode, for thermostat and mixer, like we had back in v2 - cascade MC400 (product-id 210) (3.0.0b6), power values for heating sources (3.0.1b1) - values for wwMaxPower, wwFlowtempOffset - RC300 `thermostat temp -1` to clear temporary setpoint in auto mode - syslog port selectable (#744) - individual mqtt commands (#31) - board Profiles (#11) ## Fixed - telegrams matched to masterthermostat 0x18 - multiple roomcontrollers - readback after write with delay (give ems-devices time to set the value) - thermostat ES72/RC20 device 66 to command-set RC20_2 - MQTT payloads not adding to queue when MQTT is re-connecting (fixes #369) - fix for HA topics with invalid command formats (#728) - wrong position of values #723, #732 - OTA Upload via Web on OSX - Rx and Tx quality % would sometimes show > 100 ## Changed - changed how telegram parameters are rendered for mqtt, console and web (#632) - split `show values` in smaller packages (edited) - extended length of IP/hostname from 32 to 48 chars (#676) - check flowsensor for `tap_water_active` - mqtt prefixed with `Base` - count Dallas sensor fails - switch from SPIFFS to LITTLEFS - added ID to MQTT payloads which is the Device's product ID and used in HA to identify a unique HA device - increased MQTT buffer and reduced wait time between publishes - updated to the latest ArduinoJson library - some names of mqtt-tags like in v2.2.1 - new ESP32 partition side to allow for smoother OTA and fallback - network Gateway IP is optional (#682)emsesp/EMS-ESP - moved to a new GitHub repo https://github.com/emsesp/EMS-ESP32 - invert LED changed to Hide LED. Default is off. - renamed Scan Network to Scan WiFi Network - added version to cmd=settings - Allow both WiFi and Ethernet together, fall back to AP when Ethernet disconnects ## Removed - Shower Alert (disabled for now) # [3.0.0] March 18 2021 ## Added - Power settings, disabling BLE and turning off Wifi sleep - Rx and Tx counts to Heartbeat MQTT payload - Ethernet support - id to info command to show only a heatingcircuit - add sending devices that are not listed to 0x07 - extra MQTT boolean option for "ON" and "OFF" - Support for chunked MQTT payloads to allow large data sets > 2kb - External Button support (#708) for resetting to factory defaults and other actions - new console set command in `system`, `set ethernet ` for quickly enabling cabled ethernet connections without using the captive wifi portal - Added in MQTT nested mode, for thermostat and mixer, like we had back in v2 - Cascade MC400 (product-id 210) (3.0.0b6) - values for wwMaxPower, wwFlowtempOffset - RC300 `thermostat temp -1` to clear temporary setpoint in auto mode - Syslog port selectable (#744) ## Fixed - telegrams matched to masterthermostat 0x18 - multiple roomcontrollers - readback after write with delay (give ems-devices time to set the value) - Thermostat ES72/RC20 device 66 to command-set RC20_2 - MQTT payloads not adding to queue when MQTT is re-connecting (fixes #369) - fix for HA topics with invalid command formats (#728) - wrong position of values #723, #732 - OTA Upload via Web on OSX ## Changed - changed how telegram parameters are rendered for mqtt, console and web (#632) - split `show values` in smaller packages (edited) - extended length of IP/hostname from 32 to 48 chars (#676) - check flowsensor for `tap_water_active` - mqtt prefixed with `Base` - count Dallas sensor fails - switch from SPIFFS to LITTLEFS - Added ID to MQTT payloads which is the Device's product ID and used in HA to identify a unique HA device - Increased MQTT buffer and reduced wait time between publishes - Updated to the latest ArduinoJson library - some names of mqtt-tags like in v2.2.1 - new ESP32 partition side to allow for smoother OTA and fallback - Network Gateway IP is optional (#682)emsesp/EMS-ESP - moved to a new GitHub repo https://github.com/emsesp/EMS-ESP32