/*
 * EMS-ESP - https://github.com/proddy/EMS-ESP
 * Copyright 2019  Paul Derbyshire
 * 
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
#if defined(ESP8266)

#ifndef EMSESP_EMSUART_H
#define EMSESP_EMSUART_H

#include <Arduino.h>

#include <user_interface.h>
#include <uuid/log.h>

#define EMSUART_UART 0      // UART 0
#define EMSUART_CONFIG 0x1C // 8N1 (8 bits, no stop bits, 1 parity)
#define EMSUART_BAUD 9600   // uart baud rate for the EMS circuit

#define EMS_MAXBUFFERS 3     // buffers for circular filling to avoid collisions
#define EMS_MAXBUFFERSIZE 33 // max size of the buffer. EMS packets are max 32 bytes, plus extra 2 for BRKs

#define EMSUART_recvTaskPrio 2      // 0, 1 or 2. 0 being the lowest
#define EMSUART_recvTaskQueueLen 10 // number of queued Rx triggers

#define EMS_TXMODE_DEFAULT 1
#define EMS_TXMODE_EMSPLUS 2
#define EMS_TXMODE_HT3 3
#define EMS_TXMODE_NEW 4 // for michael's testing

// LEGACY
#define EMSUART_TX_BIT_TIME 104  // bit time @9600 baud
#define EMSUART_TX_BRK_WAIT 2070 // the BRK from Boiler master is roughly 1.039ms, so accounting for hardware lag using around 2078 (for half-duplex) - 8 (lag)

// EMS 1.0
#define EMSUART_TX_BUSY_WAIT (EMSUART_TX_BIT_TIME / 8) // 13

// HT3/Junkers - Time to send one Byte (8 Bits, 1 Start Bit, 1 Stop Bit). The -8 is for lag compensation.
#define EMSUART_TX_BRK_WAIT_HT3 (EMSUART_TX_BIT_TIME * 11) - 8 // 1136

namespace emsesp {

#define EMS_TX_STATUS_ERR 0
#define EMS_TX_STATUS_OK 1

class EMSuart {
  public:
    EMSuart()  = default;
    ~EMSuart() = default;

    static void ICACHE_FLASH_ATTR     start(uint8_t tx_mode);
    static void ICACHE_FLASH_ATTR     stop();
    static void ICACHE_FLASH_ATTR     restart();
    static void ICACHE_FLASH_ATTR     send_poll(uint8_t data);
    static uint16_t ICACHE_FLASH_ATTR transmit(uint8_t * buf, uint8_t len);

    typedef struct {
        uint8_t length;
        uint8_t buffer[EMS_MAXBUFFERSIZE];
    } EMSRxBuf_t;

  private:
    // static constexpr uint32_t     EMS_RX_TO_TX_TIMEOUT = 20;
    static uuid::log::Logger      logger_;
    static void ICACHE_RAM_ATTR   emsuart_rx_intr_handler(void * para);
    static void ICACHE_FLASH_ATTR emsuart_recvTask(os_event_t * events);
    static void ICACHE_FLASH_ATTR emsuart_flush_fifos();
    static void ICACHE_FLASH_ATTR tx_brk();
    static void ICACHE_RAM_ATTR   emsuart_tx_timer_intr_handler();
};

} // namespace emsesp

#endif
#endif