/*
 * EMS-ESP - https://github.com/proddy/EMS-ESP
 * Copyright 2019  Paul Derbyshire
 * 
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "shower.h"

MAKE_PSTR(logger_name, "shower")

namespace emsesp {

uuid::log::Logger Shower::logger_{F_(logger_name), uuid::log::Facility::CONSOLE};

void Shower::start() {
    Settings settings;

    shower_timer_ = settings.shower_timer();
    shower_alert_ = settings.shower_alert();
}

void Shower::loop() {
    if (!shower_timer_) {
        return;
    }

    uint32_t time_now = millis();
    // if already in cold mode, ignore all this logic until we're out of the cold blast
    if (!doing_cold_shot_) {
        // is the hot water running?
        if (EMSESP::tap_water_active()) {
            // if heater was previously off, start the timer
            if (timer_start_ == 0) {
                // hot water just started...
                timer_start_     = time_now;
                timer_pause_     = 0; // remove any last pauses
                doing_cold_shot_ = false;
                duration_        = 0;
                shower_on_       = false;
            } else {
                // hot water has been  on for a while
                // first check to see if hot water has been on long enough to be recognized as a Shower/Bath
                if (!shower_on_ && (time_now - timer_start_) > SHOWER_MIN_DURATION) {
                    shower_on_ = true;
                    Mqtt::publish("shower_active", (bool)true);
                    DEBUG_LOG(F("[Shower] hot water still running, starting shower timer"));
                }
                // check if the shower has been on too long
                else if ((((time_now - timer_start_) > SHOWER_MAX_DURATION) && !doing_cold_shot_) && shower_alert_) {
                    shower_alert_start();
                }
            }
        } else { // hot water is off
            // if it just turned off, record the time as it could be a short pause
            if ((timer_start_) && (timer_pause_ == 0)) {
                timer_pause_ = time_now;
            }

            // if shower has been off for longer than the wait time
            if ((timer_pause_) && ((time_now - timer_pause_) > SHOWER_PAUSE_TIME)) {
                // it is over the wait period, so assume that the shower has finished and calculate the total time and publish
                // because its unsigned long, can't have negative so check if length is less than OFFSET_TIME
                if ((timer_pause_ - timer_start_) > SHOWER_OFFSET_TIME) {
                    duration_ = (timer_pause_ - timer_start_ - SHOWER_OFFSET_TIME);
                    if (duration_ > SHOWER_MIN_DURATION) {
                        Mqtt::publish("shower_active", (bool)false);
                        DEBUG_LOG(F("[Shower] finished with duration %d"), duration_);
                        publish_values();
                    }
                }

                // reset everything
                timer_start_ = 0;
                timer_pause_ = 0;
                shower_on_   = false;
                shower_alert_stop();
            }
        }
    }
}

// turn back on the hot water for the shower
void Shower::shower_alert_stop() {
    if (doing_cold_shot_) {
        DEBUG_LOG(F("Shower Alert stopped"));
        // Boiler::set_tapwarmwater_activated(true);
        doing_cold_shot_ = false;
        // showerColdShotStopTimer.detach(); // disable the timer
    }
}

// turn off hot water to send a shot of cold
void Shower::shower_alert_start() {
    if (shower_alert_) {
        DEBUG_LOG(F("Shower Alert started!"));
        // Boiler::set_tapwarmwater_activated(false);
        doing_cold_shot_ = true;
        // start the timer for n seconds which will reset the water back to hot
        // showerColdShotStopTimer.attach(SHOWER_COLDSHOT_DURATION, _showerColdShotStop);
    }
}

// Publish shower data
// returns true if added to MQTT queue went ok
void Shower::publish_values() {
    StaticJsonDocument<90> doc;
    doc["shower_timer"] = shower_timer_ ? "1" : "0";
    doc["shower_alert"] = shower_alert_ ? "1" : "0";

    // only publish shower duration if there is a value
    char s[50];
    if (duration_ > SHOWER_MIN_DURATION) {
        char buffer[16] = {0};
        strlcpy(s, Helpers::itoa(buffer, (uint8_t)((duration_ / (1000 * 60)) % 60), 10), 50);
        strlcat(s, " minutes and ", 50);
        strlcat(s, Helpers::itoa(buffer, (uint8_t)((duration_ / 1000) % 60), 10), 50);
        strlcat(s, " seconds", 50);
        doc["duration"] = s;
    }

    Mqtt::publish("shower_data", doc);
}

} // namespace emsesp