EMS-ESP32/CHANGELOG_LATEST.md

Changelog

Important Breaking Changes

• 3.0.0b2 uses a new filesystem. During upgrading all settings will be erased and not migrated.

Added

• power settings, disabling BLE and turning off Wifi sleep
• Rx and Tx counts to Heartbeat MQTT payload
• ethernet support
• id to info command to show only a heatingcircuit
• add sending devices that are not listed to 0x07
• extra MQTT boolean option for "ON" and "OFF"
• support for chunked MQTT payloads to allow large data sets > 2kb
• external Button support (#708) for resetting to factory defaults and other actions
• new console set command in system, set ethernet <profile> for quickly enabling cabled ethernet connections without using the captive wifi portal
• added in MQTT nested mode, for thermostat and mixer, like we had back in v2
• cascade MC400 (product-id 210) (3.0.0b6), power values for heating sources (3.0.1b1)
• values for wwMaxPower, wwFlowtempOffset
• RC300 thermostat temp -1 to clear temporary setpoint in auto mode
• syslog port selectable (#744)
• individual mqtt commands (#31)
• board Profiles (#11)

Fixed

• telegrams matched to masterthermostat 0x18
• multiple roomcontrollers
• readback after write with delay (give ems-devices time to set the value)
• thermostat ES72/RC20 device 66 to command-set RC20_2
• MQTT payloads not adding to queue when MQTT is re-connecting (fixes #369)
• fix for HA topics with invalid command formats (#728)
• wrong position of values #723, #732
• OTA Upload via Web on OSX
• Rx and Tx quality % would sometimes show > 100

Changed

• changed how telegram parameters are rendered for mqtt, console and web (#632)
• split show values in smaller packages (edited)
• extended length of IP/hostname from 32 to 48 chars (#676)
• check flowsensor for tap_water_active
• mqtt prefixed with Base
• count Dallas sensor fails
• switch from SPIFFS to LITTLEFS
• added ID to MQTT payloads which is the Device's product ID and used in HA to identify a unique HA device
• increased MQTT buffer and reduced wait time between publishes
• updated to the latest ArduinoJson library
• some names of mqtt-tags like in v2.2.1
• new ESP32 partition side to allow for smoother OTA and fallback
• network Gateway IP is optional (#682)emsesp/EMS-ESP
• moved to a new GitHub repo https://github.com/emsesp/EMS-ESP32
• invert LED changed to Hide LED. Default is off.
• renamed Scan Network to Scan WiFi Network
• added version to cmd=settings
• Allow both WiFi and Ethernet together

Removed

• Shower Alert (disabled for now)