mirror of
https://github.com/emsesp/EMS-ESP32.git
synced 2025-12-09 17:29:50 +03:00
52 lines
3.3 KiB
Markdown
52 lines
3.3 KiB
Markdown
# Changelog
|
|
|
|
# [3.3.0]
|
|
|
|
## Added
|
|
|
|
- Add system commands for syslog level and watch [#98](https://github.com/emsesp/EMS-ESP32/issues/98)
|
|
- Added pool data to telegrams 0x494 & 0x495 #102 [#102](https://github.com/emsesp/EMS-ESP32/issues/102) (@Sunbuzz)
|
|
- Add RC300 second summermode telegram [#108](https://github.com/emsesp/EMS-ESP32/issues/108)
|
|
- Add support for the RC25 thermostat [#106](https://github.com/emsesp/EMS-ESP32/issues/106)
|
|
- Add new command 'entities' for a device, e.g. http://ems-esp/api/boiler/entities to show the shortname, description and HA Entity name (if HA enabled) [#116](https://github.com/emsesp/EMS-ESP32/issues/116)
|
|
- Support for Junkers program and remote (fb10/fb110) temperature
|
|
- Home Assistant `state_class` attribute for Wh, kWh, W and KW [#129](https://github.com/emsesp/EMS-ESP32/issues/129)
|
|
- Add current room influence for RC300[#136]
|
|
- Added Home Assistant device_class to sensor entities
|
|
- Added another Buderus RC10 thermostat with Product ID 65 [#160](https://github.com/emsesp/EMS-ESP32/issues/160)
|
|
- Added support for mDNS [#161](https://github.com/emsesp/EMS-ESP32/issues/161)
|
|
- Added last system ESP32 reset code to log (and `system info` output)
|
|
- Firmware Checker in WebUI [#168](https://github.com/emsesp/EMS-ESP32/issues/168)
|
|
- Added new MQTT setting for enabling 'response' topic
|
|
- Support for non-standard Thermostats like Tado [#174](https://github.com/emsesp/EMS-ESP32/issues/174)
|
|
|
|
## Fixed
|
|
|
|
- MQTT reconnecting after WiFi reconnect [#99](https://github.com/emsesp/EMS-ESP32/issues/99)
|
|
- Manually Controlling Solar Circuit [#107](https://github.com/emsesp/EMS-ESP32/issues/107)
|
|
- Fix thermostat commands not defaulting to the master thermostat [#110](https://github.com/emsesp/EMS-ESP32/issues/110)
|
|
- Enlarge parse-buffer for long names like `cylinderpumpmodulation`
|
|
- MQTT not subscribing to all device entities [#166](https://github.com/emsesp/EMS-ESP32/issues/166)
|
|
- Help fix issues with WebUI unable to fully load UI over Ethernet [#177](https://github.com/emsesp/EMS-ESP32/issues/177)
|
|
|
|
## Changed
|
|
|
|
- Syslog BOM only for utf-8 messages [#91](https://github.com/emsesp/EMS-ESP32/issues/91)
|
|
- Check for KM200 by device-id 0x48, remove tx-delay [#90](https://github.com/emsesp/EMS-ESP32/issues/90)
|
|
- rename `fastheatupfactor` to `fastheatup` and add percent [#122]
|
|
- "unit" renamed to "uom" in API call to recall a Device Value
|
|
- initial backend React changes to replace the class components (HOCs) with React Hooks
|
|
- Use program-names instead of numbers
|
|
- Boiler's maintenancemessage always published in MQTT (to prevent HA missing entity)
|
|
- Unit of Measure 'times' added to MQTT Fails, Rx fails, Rx received, Tx fails, Tx reads & Tx writes
|
|
- Improved API. Restful HTTP API works in the same way as MQTT calls
|
|
- Removed settings for MQTT subscribe format [#173](https://github.com/emsesp/EMS-ESP32/issues/173)
|
|
|
|
## **BREAKING CHANGES**
|
|
|
|
- API: "unit" renamed to "uom" in API call to recall a Device Value
|
|
- HA: `sensor.boiler_boiler_temperature` renamed to `sensor.actual_boiler_temperature`
|
|
- HA: `binary_sensor.boiler_ww_disinfecting` renamed to `binary_sensor.boiler_ww_disinfection`
|
|
- HA: # removed from counts in MQTT Fails, Rx fails, Rx received, Tx fails, Tx reads & Tx writes
|
|
- `txread` renamed to `txreads` and `txwrite` renamed to `txwrites` in MQTT heartbeat payload
|