mirror of
https://github.com/emsesp/EMS-ESP32.git
synced 2025-12-06 07:49:52 +03:00
83 lines
3.3 KiB
Plaintext
83 lines
3.3 KiB
Plaintext
; example custom platformio ini file for EMS-ESP
|
|
|
|
[common]
|
|
; custom build flags to use in my_build_flags
|
|
; -DEMSESP_UART_DEBUG ; debugging UART
|
|
; -DEMSESP_DEBUG ; enables DEBUG to the log. Will generate a lot of extra traffic on Console and Syslog
|
|
; -DEMSESP_DEFAULT_BOARD_PROFILE=\"NODEMCU\" ; hard code the default board name
|
|
; -DEMSESP_DEBUG_SENSOR ; additional debug for the sensors
|
|
; -DCORE_DEBUG_LEVEL=5 ; verbose core level debugging 5=verbose, 4=debug, 3=info
|
|
; -DEMSESP_TEST ; enable the tests. EN language only
|
|
; -DEMSESP_DE_ONLY ; only DE translated entity names
|
|
; -DEMSESP_EN_ONLY ; only EN translated entity names
|
|
; -DEMSESP_PINGTEST ; send log message every 1/2 second
|
|
|
|
; my_build_flags = -DEMSESP_TEST -DEMSESP_DEBUG
|
|
; my_build_flags = -DEMSESP_DEBUG -DEMSESP_TEST -DEMSESP_PINGTEST
|
|
; my_build_flags = -DEMSESP_DEBUG -DCORE_DEBUG_LEVEL=5
|
|
my_build_flags =
|
|
|
|
[platformio]
|
|
; default_envs = s_16M_P ; BBQKees E32V2
|
|
; default_envs = s3_16M_P ; BBQKees S3
|
|
; default_envs = s_4M ; BBQKees older S32, 4MB no psram
|
|
default_envs = s_16M ; BBQKees newer S32 V2, 16MB no psram
|
|
|
|
[env]
|
|
|
|
; uncomment this section to enable extra debug
|
|
; build_type = debug
|
|
; monitor_filters = colorize, esp32_exception_decoder
|
|
|
|
; uncomment if you want to upload the firmware via OTA (must have upload_protocol = custom)
|
|
; extra_scripts =
|
|
; pre:scripts/build_interface.py ; builds the WebUI (unless NO_BUILD_WEBUI is set) - comment out if you don't want to build each time
|
|
; scripts/rename_fw.py ; renames the firmware .bin file - comment out if not needed
|
|
; scripts/upload.py ; optionally upload the firmware via OTA (must have upload_protocol = custom)
|
|
|
|
; set the username and password for the admin account (default password is admin)
|
|
custom_username = admin
|
|
custom_password = admin
|
|
|
|
; ** upload settings **
|
|
; for direct USB, which is the default you can set an optional port for example:
|
|
; upload_port = /dev/ttyUSB0 or COM3
|
|
;
|
|
; for direct via HTTP (OTA) set:
|
|
; upload_protocol = custom
|
|
; custom_emsesp_ip = <ip address> or ems-esp.local
|
|
|
|
; upload_protocol = custom
|
|
; custom_emsesp_ip = 10.10.10.93
|
|
|
|
; example override for lib_deps and using locally built modules
|
|
; lib_deps =
|
|
; bblanchon/ArduinoJson @ 7.4.1
|
|
; ESP32Async/AsyncTCP @ 3.4.3
|
|
; ESP32Async/ESPAsyncWebServer @ 3.7.7
|
|
; file://${PROJECT_DIR}/../modules/EMS-ESP-Modules
|
|
; ; https://github.com/emsesp/EMS-ESP-Modules.git @ 1.0.7
|
|
|
|
; ** debug settings **
|
|
; to be used with esp-prog/JTAG hardware device like https://docs.espressif.com/projects/esp-dev-kits/en/latest/other/esp-prog/user_guide.html
|
|
; pio run -e debug
|
|
; add to build_flags these additional options: EMSESP_DEBUG EMSESP_UART_DEBUG EMSESP_DEBUG_SENSOR
|
|
[env:debug]
|
|
board = esp32dev
|
|
framework = arduino
|
|
platform = espressif32
|
|
board_build.partitions = partitions/esp32_partition_debug.csv
|
|
board_upload.flash_size = 4MB
|
|
board_build.filesystem = littlefs
|
|
upload_protocol = esptool
|
|
build_type = debug
|
|
monitor_raw = no
|
|
monitor_filters = esp32_exception_decoder
|
|
debug_tool = esp-prog
|
|
debug_init_break = tbreak setup
|
|
build_flags = ${factory_settings.build_flags} -DEMSESP_EN_ONLY -DCORE_DEBUG_LEVEL=5 -DONEWIRE_CRC16=0 -DNO_GLOBAL_ARDUINOOTA -DARDUINOJSON_ENABLE_STD_STRING=1 -DESP32=1 -DARDUINO_ARCH_ESP32=1
|
|
upload_port = /dev/ttyUSB0
|
|
extra_scripts =
|
|
scripts/rename_fw.py
|
|
post:scripts/app-tls-size.py
|