mirror of
https://github.com/emsesp/EMS-ESP32.git
synced 2025-12-06 07:49:52 +03:00
70 lines
2.8 KiB
Plaintext
70 lines
2.8 KiB
Plaintext
; example custom platformio ini file for EMS-ESP
|
|
|
|
[common]
|
|
; custom build flags to use in my_build_flags
|
|
; -DEMSESP_UART_DEBUG ; debugging UART
|
|
; -DEMSESP_DEBUG ; enables DEBUG to the log. Will generate a lot of extra traffic on Console and Syslog
|
|
; -DEMSESP_DEFAULT_BOARD_PROFILE=\"NODEMCU\" ; hard code the default board name
|
|
; -DEMSESP_DEBUG_SENSOR ; additional debug for the sensors
|
|
; -DCORE_DEBUG_LEVEL=5 ; verbose core level debugging 5=verbose, 4=debug, 3=info
|
|
; -DEMSESP_TEST ; enable the tests. EN language only
|
|
; -DEMSESP_DE_ONLY ; only DE translated entity names
|
|
; -DEMSESP_EN_ONLY ; only EN translated entity names
|
|
; -DEMSESP_PINGTEST ; send log message every 1/2 second
|
|
|
|
; my_build_flags = -DEMSESP_TEST -DEMSESP_DEBUG
|
|
; my_build_flags = -DEMSESP_DEBUG -DEMSESP_TEST -DEMSESP_PINGTEST
|
|
; my_build_flags = -DEMSESP_DEBUG -DCORE_DEBUG_LEVEL=5
|
|
; my_build_flags = -DEMSESP_EN_ONLY -DEMSESP_TEST -DCORE_DEBUG_LEVEL=5 -DARDUINO_USB_CDC_ON_BOOT=1
|
|
my_build_flags =
|
|
|
|
[platformio]
|
|
default_envs = s_16M_P ; BBQKees E32V2
|
|
; default_envs = s3_16M_P ; BBQKees S3
|
|
; default_envs = s_4M ; BBQKees older S32, 4MB no psram
|
|
; default_envs = s_16M ; BBQKees newer S32 V2, 16MB no psram
|
|
; default_envs = c6 ; XIAO ESP32C
|
|
; default_envs = debug
|
|
|
|
[env]
|
|
|
|
extra_scripts =
|
|
pre:scripts/build_interface.py ; builds the WebUI
|
|
scripts/rename_fw.py ; renames the firmware .bin file - comment out if not needed
|
|
scripts/upload.py ; optionally upload the firmware via OTA (must have upload_protocol = custom)
|
|
|
|
; set the username and password for the admin account (default password is admin)
|
|
custom_username = admin
|
|
custom_password = admin
|
|
|
|
; ** upload settings **
|
|
; for direct USB, which is the default you can set an optional port for example:
|
|
; upload_port = /dev/ttyUSB0 or COM3
|
|
;
|
|
; for direct via HTTP (OTA) set:
|
|
; upload_protocol = custom
|
|
; custom_emsesp_ip = <ip address> or ems-esp.local
|
|
|
|
; ** debug settings **
|
|
; to be used with an ESP32-S3 which has an onboard JTAG, connect the OTG USB port to the PC
|
|
; if using an external JTAG board like the ESP-PROG set debug_tool = esp-prog, and use zadig to set the correct driver for the USB port
|
|
; see https://docs.platformio.org/en/stable/projectconf/sections/env/options/debug/debug_init_break.html for settings
|
|
; use with my_build_flags = -DEMSESP_EN_ONLY -DEMSESP_TEST -DCORE_DEBUG_LEVEL=5 -DARDUINO_USB_CDC_ON_BOOT=1
|
|
[env:debug]
|
|
board = esp32-s3-devkitc-1
|
|
framework = arduino
|
|
platform = espressif32@6.12.0 ; Arduino Core v2.0.17 / IDF v4.4.7
|
|
board_build.partitions = partitions/esp32_partition_16M.csv
|
|
board_upload.flash_size = 16MB
|
|
board_build.app_partition_name = app0
|
|
board_build.filesystem = littlefs
|
|
upload_protocol = esptool
|
|
build_type = debug
|
|
monitor_raw = no
|
|
monitor_filters = colorize, esp32_exception_decoder
|
|
debug_tool = esp-builtin
|
|
debug_init_break =
|
|
upload_speed = 2000000
|
|
monitor_speed = 115200
|
|
extra_scripts =
|
|
; debug_build_flags = -Og -g2 -ggdb2 |