mirror of
https://github.com/emsesp/EMS-ESP32.git
synced 2026-10-28 11:14:58 +00:00
Jaano RosinandClaude Opus 5
5cc45b97bc
The heat limit registers on heat pumps using EMS_DEVICE_FLAG_HEATPUMP
(product 172/173) are bytes 2/3/4 of telegram 0x0492, read as a direct
index into enum_maxHeat. That table has only six entries, so any unit
whose auxiliary electric heater goes above 9 kW reports an index the
table cannot resolve.
Nothing bounds-checks the raw byte on the way in, and every render path
guards on `value < options_size`, so an out-of-range index is dropped
silently: no value is published to MQTT, the API omits the field, Home
Assistant shows `unknown`, and nothing appears in the log. Helpers::
value2enum stops at the same boundary, so the value cannot be written
back from EMS-ESP either, leaving the entity permanently stuck.
Measured on a Bosch Compress 7000i AW (CS7000iAW 13 OR-T, product 172)
with a 15 kW auxiliary heater, by setting each limit from the unit's own
display and reading telegram 0x0492 back:
display 12 / 9 / 6 kW -> 0x0492 data: 03 00 06 05 04
raw kW note
0 0 agrees with the existing table
1 2 not offered by this heater
2 3 not offered by this heater
3 4 not offered by this heater
4 6 agrees with the existing table
5 9 agrees with the existing table
6 12 new
7 15 new
Indices 0, 4 and 5 match what EMS-ESP already decodes, which confirms the
existing entries and their ordering; the table was correct, just short.
The 2 kW and 4 kW entries belong to the 4-stufig (2/4/6/9 kW) heater
variant described in the HPC 410 service manual section 4.2.2, so a
3 kW-stepped heater simply skips them and walks 0, 3, 6, 9, 12, 15 kW,
i.e. raw 0, 2, 4, 5, 6, 7. The same sparse pattern is already encoded for
CS6800 devices in Boiler::process_HpHeaterConfig, which maps raw
{0, 2, 4, 5} onto {0, 3, 6, 9} kW.
Only devices carrying EMS_DEVICE_FLAG_HEATPUMP are affected; CS6800
devices use enum_maxHeat1/enum_maxHeat2 and are unchanged. Verified with
the standalone build: `test entity_dump` differs from the committed
docs/dump_entities.csv in exactly the six maxheat rows of products 172
and 173, and nowhere else.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
429 lines
18 KiB
C
429 lines
18 KiB
C
/*
|
|
* EMS-ESP - https://github.com/emsesp/EMS-ESP
|
|
* Copyright 2020-2025 emsesp.org
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
#pragma GCC diagnostic push
|
|
#pragma GCC diagnostic ignored "-Wunused-variable"
|
|
|
|
// clang-format off
|
|
|
|
/*
|
|
* THIS FILE CONTAINS STANDARD STRING LITERALS THAT DON'T NEED LANGUAGE TRANSLATIONS
|
|
*/
|
|
|
|
// common words
|
|
MAKE_WORD(exit)
|
|
MAKE_WORD(help)
|
|
MAKE_WORD(log)
|
|
MAKE_WORD(set)
|
|
MAKE_WORD(show)
|
|
MAKE_WORD(su)
|
|
MAKE_WORD(scan)
|
|
MAKE_WORD(password)
|
|
MAKE_WORD(admin)
|
|
MAKE_WORD(read)
|
|
MAKE_WORD(values)
|
|
MAKE_WORD(system)
|
|
MAKE_WORD(fetch)
|
|
MAKE_WORD(restart)
|
|
MAKE_WORD(format)
|
|
MAKE_WORD(txpause)
|
|
MAKE_WORD(led)
|
|
MAKE_WORD(raw)
|
|
MAKE_WORD(watch)
|
|
MAKE_WORD(syslog)
|
|
MAKE_WORD(send)
|
|
MAKE_WORD(sendmail)
|
|
MAKE_WORD(telegram)
|
|
MAKE_WORD(bus_id)
|
|
MAKE_WORD(tx_mode)
|
|
MAKE_WORD(showertimer)
|
|
MAKE_WORD(showeralert)
|
|
MAKE_WORD(ems)
|
|
MAKE_WORD(devices)
|
|
MAKE_WORD(shower)
|
|
MAKE_WORD(mqtt)
|
|
MAKE_WORD(gpio)
|
|
MAKE_WORD(modbus)
|
|
MAKE_WORD(emsesp)
|
|
MAKE_WORD(network)
|
|
MAKE_WORD(connected)
|
|
MAKE_WORD(disconnected)
|
|
MAKE_WORD(passwd)
|
|
MAKE_WORD(hostname)
|
|
MAKE_WORD(wifi)
|
|
MAKE_WORD(reconnect)
|
|
MAKE_WORD(ssid)
|
|
MAKE_WORD(heartbeat)
|
|
MAKE_WORD(users)
|
|
MAKE_WORD(publish)
|
|
MAKE_WORD(board_profile)
|
|
MAKE_WORD(setvalue)
|
|
MAKE_WORD(service)
|
|
MAKE_WORD(message)
|
|
|
|
// for commands
|
|
MAKE_WORD(call)
|
|
MAKE_WORD(cmd)
|
|
MAKE_WORD(id)
|
|
MAKE_WORD(hc)
|
|
MAKE_WORD(dhw)
|
|
MAKE_WORD(device)
|
|
MAKE_WORD(data)
|
|
MAKE_WORD(command)
|
|
MAKE_WORD(commands)
|
|
MAKE_WORD(info)
|
|
MAKE_WORD(settings)
|
|
MAKE_WORD(value)
|
|
MAKE_WORD(entities)
|
|
MAKE_WORD(metrics)
|
|
MAKE_WORD(coldshot)
|
|
|
|
// device types - lowercase, used in MQTT
|
|
MAKE_WORD(boiler)
|
|
MAKE_WORD(thermostat)
|
|
MAKE_WORD_CUSTOM(switcher, "switch")
|
|
MAKE_WORD(solar)
|
|
MAKE_WORD(mixer)
|
|
MAKE_WORD(gateway)
|
|
MAKE_WORD(controller)
|
|
MAKE_WORD(connect)
|
|
MAKE_WORD(heatpump)
|
|
MAKE_WORD(generic)
|
|
MAKE_WORD(analogsensor)
|
|
MAKE_WORD(temperaturesensor)
|
|
MAKE_WORD(alert)
|
|
MAKE_WORD(pump)
|
|
MAKE_WORD(extension)
|
|
MAKE_WORD(heatsource)
|
|
MAKE_WORD(scheduler)
|
|
MAKE_WORD(custom)
|
|
MAKE_WORD(ventilation)
|
|
MAKE_WORD(water)
|
|
MAKE_WORD(pool)
|
|
|
|
// brands
|
|
MAKE_WORD_CUSTOM(bosch, "Bosch")
|
|
MAKE_WORD_CUSTOM(junkers, "Junkers")
|
|
MAKE_WORD_CUSTOM(buderus, "Buderus")
|
|
MAKE_WORD_CUSTOM(nefit, "Nefit")
|
|
MAKE_WORD_CUSTOM(sieger, "Sieger")
|
|
MAKE_WORD_CUSTOM(worcester, "Worcester")
|
|
MAKE_WORD_CUSTOM(ivt, "IVT")
|
|
MAKE_WORD_CUSTOM(no_brand, "")
|
|
|
|
// types
|
|
MAKE_WORD_CUSTOM(number, "number")
|
|
MAKE_WORD_CUSTOM(enum, "enum")
|
|
MAKE_WORD_CUSTOM(text, "text")
|
|
|
|
// Console
|
|
MAKE_WORD_CUSTOM(EMSESP, "EMS-ESP")
|
|
MAKE_WORD_CUSTOM(host_fmt, "Host: %s")
|
|
MAKE_WORD_CUSTOM(port_fmt, "Port: %d")
|
|
MAKE_WORD_CUSTOM(hostname_fmt, "Hostname: %s")
|
|
MAKE_WORD_CUSTOM(mark_interval_fmt, "Mark interval: %lus")
|
|
MAKE_WORD_CUSTOM(wifi_ssid_fmt, "WiFi SSID: %s")
|
|
MAKE_WORD_CUSTOM(wifi_password_fmt, "WiFi Password: %S")
|
|
MAKE_WORD_CUSTOM(tx_mode_fmt, "Tx mode: %d")
|
|
MAKE_WORD_CUSTOM(bus_id_fmt, "Bus ID: %02X")
|
|
MAKE_WORD_CUSTOM(log_level_fmt, "Log level: %s")
|
|
MAKE_WORD_CUSTOM(cmd_optional, "[cmd]")
|
|
MAKE_WORD_CUSTOM(ha_optional, "[ha]")
|
|
MAKE_WORD_CUSTOM(deep_optional, "[deep]")
|
|
MAKE_WORD_CUSTOM(watchid_optional, "[ID]")
|
|
MAKE_WORD_CUSTOM(watch_format_optional, "[off | on | raw | unknown]")
|
|
MAKE_WORD_CUSTOM(invalid_watch, "Invalid watch type")
|
|
MAKE_WORD_CUSTOM(data_mandatory, "\"XX XX ...\"")
|
|
MAKE_WORD_CUSTOM(asterisks, "********")
|
|
MAKE_WORD_CUSTOM(n_mandatory, "<n>")
|
|
MAKE_WORD_CUSTOM(sensorid_optional, "[sensor ID]")
|
|
MAKE_WORD_CUSTOM(id_optional, "[id|hc]")
|
|
MAKE_WORD_CUSTOM(partitionname_optional, "[partitionname]")
|
|
MAKE_WORD_CUSTOM(data_optional, "[data]")
|
|
MAKE_WORD_CUSTOM(offset_optional, "[offset]")
|
|
MAKE_WORD_CUSTOM(length_optional, "[length]")
|
|
MAKE_WORD_CUSTOM(typeid_mandatory, "<type ID>")
|
|
MAKE_WORD_CUSTOM(deviceid_mandatory, "<deviceID>")
|
|
MAKE_WORD_CUSTOM(device_type_optional, "[device]")
|
|
MAKE_WORD_CUSTOM(invalid_log_level, "Invalid log level")
|
|
MAKE_WORD_CUSTOM(log_level_optional, "[level]")
|
|
MAKE_WORD_CUSTOM(show_commands, "[system | users | devices | log | ems | values | mqtt | commands]")
|
|
MAKE_WORD_CUSTOM(name_mandatory, "<name>")
|
|
MAKE_WORD_CUSTOM(name_optional, "[name]")
|
|
MAKE_WORD_CUSTOM(new_password_prompt1, "Enter new password: ")
|
|
MAKE_WORD_CUSTOM(new_password_prompt2, "Retype new password: ")
|
|
MAKE_WORD_CUSTOM(password_prompt, "Password: ")
|
|
MAKE_WORD_CUSTOM(unset, "<unset>")
|
|
MAKE_WORD_CUSTOM(enable_mandatory, "<enable | disable>")
|
|
MAKE_WORD_CUSTOM(service_mandatory, "<ap | mqtt | ntp>")
|
|
|
|
// more common names that don't need translations
|
|
MAKE_NOTRANSLATION(1x3min, "1x3min")
|
|
MAKE_NOTRANSLATION(2x3min, "2x3min")
|
|
MAKE_NOTRANSLATION(3x3min, "3x3min")
|
|
MAKE_NOTRANSLATION(4x3min, "4x3min")
|
|
MAKE_NOTRANSLATION(5x3min, "5x3min")
|
|
MAKE_NOTRANSLATION(6x3min, "6x3min")
|
|
MAKE_NOTRANSLATION(auto, "auto")
|
|
MAKE_NOTRANSLATION(rc3x, "RC3x")
|
|
MAKE_NOTRANSLATION(rc20, "RC20")
|
|
MAKE_NOTRANSLATION(fb10, "FB10")
|
|
MAKE_NOTRANSLATION(fb100, "FB100")
|
|
MAKE_NOTRANSLATION(rc310, "RC310")
|
|
MAKE_NOTRANSLATION(rc200, "RC200")
|
|
MAKE_NOTRANSLATION(rc100, "RC100")
|
|
MAKE_NOTRANSLATION(rc100h, "RC100H")
|
|
MAKE_NOTRANSLATION(tc100, "TC100")
|
|
MAKE_NOTRANSLATION(rc120rf, "RC120RF")
|
|
MAKE_NOTRANSLATION(rc220, "RC220")
|
|
MAKE_NOTRANSLATION(rt800, "RT800")
|
|
MAKE_NOTRANSLATION(cr10, "CR10")
|
|
MAKE_NOTRANSLATION(cr10h, "CR10H")
|
|
MAKE_NOTRANSLATION(cr20rf, "CR20RF")
|
|
MAKE_NOTRANSLATION(single, "single")
|
|
MAKE_NOTRANSLATION(dash, "-")
|
|
MAKE_NOTRANSLATION(BLANK, "")
|
|
MAKE_NOTRANSLATION(pwm, "pwm")
|
|
MAKE_NOTRANSLATION(pwm_invers, "pwm inverse")
|
|
MAKE_NOTRANSLATION(mpc, "mpc")
|
|
MAKE_NOTRANSLATION(tempauto, "temp auto")
|
|
MAKE_NOTRANSLATION(bypass, "bypass")
|
|
MAKE_NOTRANSLATION(mixer, "mixer")
|
|
MAKE_NOTRANSLATION(monovalent, "monovalent")
|
|
MAKE_NOTRANSLATION(bivalent, "bivalent")
|
|
MAKE_NOTRANSLATION(n_o, "n_o")
|
|
MAKE_NOTRANSLATION(n_c, "n_c")
|
|
MAKE_NOTRANSLATION(prog1, "prog 1")
|
|
MAKE_NOTRANSLATION(prog2, "prog 2")
|
|
MAKE_NOTRANSLATION(proga, "prog a")
|
|
MAKE_NOTRANSLATION(progb, "prog b")
|
|
MAKE_NOTRANSLATION(progc, "prog c")
|
|
MAKE_NOTRANSLATION(progd, "prog d")
|
|
MAKE_NOTRANSLATION(proge, "prog e")
|
|
MAKE_NOTRANSLATION(progf, "prog f")
|
|
MAKE_NOTRANSLATION(rc35, "RC35")
|
|
MAKE_NOTRANSLATION(0kW, "0 kW")
|
|
MAKE_NOTRANSLATION(2kW, "2 kW")
|
|
MAKE_NOTRANSLATION(3kW, "3 kW")
|
|
MAKE_NOTRANSLATION(4kW, "4 kW")
|
|
MAKE_NOTRANSLATION(6kW, "6 kW")
|
|
MAKE_NOTRANSLATION(9kW, "9 kW")
|
|
MAKE_NOTRANSLATION(12kW, "12 kW")
|
|
MAKE_NOTRANSLATION(15kW, "15 kW")
|
|
MAKE_NOTRANSLATION(L1, "L1")
|
|
MAKE_NOTRANSLATION(L2, "L2")
|
|
MAKE_NOTRANSLATION(L3, "L3")
|
|
MAKE_NOTRANSLATION(L4, "L4")
|
|
|
|
// templates - this are not translated and will be saved under options_single
|
|
MAKE_NOTRANSLATION(tpl_datetime, "NTP | dd.mm.yyyy-hh:mm:ss-day(0-6)-dst(0/1)")
|
|
MAKE_NOTRANSLATION(tpl_switchtime, "<nn> [ not_set | day hh:mm on|off ]")
|
|
MAKE_NOTRANSLATION(tpl_switchtime1, "<nn> [ not_set | day hh:mm Tn ]")
|
|
MAKE_NOTRANSLATION(tpl_holidays, "dd.mm.yyyy-dd.mm.yyyy")
|
|
MAKE_NOTRANSLATION(tpl_date, "dd.mm.yyyy")
|
|
MAKE_NOTRANSLATION(tpl_input, "<inv>[<evu1><evu2><evu3><comp><aux><cool><heat><dhw><pv>]")
|
|
MAKE_NOTRANSLATION(tpl_input4, "<inv>[<comp><aux><cool><heat><dhw><pv>]")
|
|
|
|
#if defined(EMSESP_TEST)
|
|
MAKE_NOTRANSLATION(test_cmd, "run a test")
|
|
#endif
|
|
|
|
// TAG mapping - maps to DeviceValueTAG_s in emsdevicevalue.cpp
|
|
// use empty string if want to suppress showing tags
|
|
// mqtt tags must not have spaces
|
|
MAKE_NOTRANSLATION(tag_none, "")
|
|
MAKE_NOTRANSLATION(tag_heartbeat, "")
|
|
MAKE_NOTRANSLATION(tag_device_data, "")
|
|
|
|
// Unit Of Measurement mapping - maps to DeviceValueUOM_s in emsdevice.cpp
|
|
// Translating hours/minute/seconds are done in emsdevice.cpp (uom_to_string())
|
|
// to keep to some form of consistency, all UOMs follow Home Assistant naming conventions - https://developers.home-assistant.io/docs/core/entity/sensor/#available-device-classes
|
|
MAKE_WORD_CUSTOM(uom_blank, " ")
|
|
MAKE_WORD_CUSTOM(uom_percent, "%")
|
|
MAKE_WORD_CUSTOM(uom_degrees, "°C")
|
|
MAKE_WORD_CUSTOM(uom_kwh, "kWh")
|
|
MAKE_WORD_CUSTOM(uom_wh, "Wh")
|
|
MAKE_WORD_CUSTOM(uom_bar, "bar")
|
|
MAKE_WORD_CUSTOM(uom_ua, "µA")
|
|
MAKE_WORD_CUSTOM(uom_lmin, "l/min")
|
|
MAKE_WORD_CUSTOM(uom_kw, "kW")
|
|
MAKE_WORD_CUSTOM(uom_w, "W")
|
|
MAKE_WORD_CUSTOM(uom_kb, "KB")
|
|
MAKE_WORD_CUSTOM(uom_dbm, "dBm")
|
|
MAKE_WORD_CUSTOM(uom_fahrenheit, "°F")
|
|
MAKE_WORD_CUSTOM(uom_mv, "mV")
|
|
MAKE_WORD_CUSTOM(uom_sqm, "m²")
|
|
MAKE_WORD_CUSTOM(uom_m3, "m³")
|
|
MAKE_WORD_CUSTOM(uom_l, "l")
|
|
MAKE_WORD_CUSTOM(uom_kmin, "K*min")
|
|
MAKE_WORD_CUSTOM(uom_k, "K")
|
|
MAKE_WORD_CUSTOM(uom_volts, "V")
|
|
MAKE_WORD_CUSTOM(uom_connectivity, "connectivity")
|
|
MAKE_WORD_CUSTOM(uom_timestamp, "timestamp")
|
|
MAKE_WORD_CUSTOM(uom_mbar, "mbar")
|
|
MAKE_WORD_CUSTOM(uom_lh, "l/h")
|
|
MAKE_WORD_CUSTOM(uom_ctkwh, "ct/kWh")
|
|
MAKE_WORD_CUSTOM(uom_hz, "Hz")
|
|
|
|
// MQTT topics and prefixes
|
|
MAKE_WORD_CUSTOM(heating_active, "heating_active")
|
|
MAKE_WORD_CUSTOM(tapwater_active, "tapwater_active")
|
|
MAKE_WORD_CUSTOM(response, "response")
|
|
|
|
// syslog
|
|
MAKE_ENUM_FIXED(list_syslog_level, "off", "emerg", "alert", "crit", "error", "warn", "notice", "info", "debug", "trace", "all")
|
|
|
|
// sensors
|
|
MAKE_ENUM_FIXED(counter, "counter")
|
|
MAKE_ENUM_FIXED(digital_out, "digital_out")
|
|
MAKE_ENUM_FIXED(RGB, "RGB")
|
|
MAKE_ENUM_FIXED(pulse, "pulse")
|
|
MAKE_ENUM_FIXED(list_sensortype, "disabled", "digital in", "counter", "adc", "timer", "rate", "digital out", "pwm 0", "pwm 1", "pwm 2", "NTC Temp", "RGB Led", "pulse", "freq 0", "freq 1", "freq 2")
|
|
|
|
// watch
|
|
MAKE_ENUM_FIXED(list_watch, "off", "on", "raw", "unknown")
|
|
|
|
/*
|
|
* The rest below are Enums and generated from translations lists
|
|
*/
|
|
MAKE_ENUM(enum_cylprio, FL_(cyl1), FL_(cyl2))
|
|
MAKE_ENUM(enum_progMode, FL_(prog1), FL_(prog2))
|
|
MAKE_ENUM(enum_progMode4, FL_(proga), FL_(progb), FL_(progc), FL_(progd), FL_(proge), FL_(progf))
|
|
MAKE_ENUM(enum_climate, FL_(seltemp), FL_(roomtemp))
|
|
MAKE_ENUM(enum_charge, FL_(chargepump), FL_(3wayvalve))
|
|
MAKE_ENUM(enum_freq, FL_(off), FL_(1x3min), FL_(2x3min), FL_(3x3min), FL_(4x3min), FL_(5x3min), FL_(6x3min), FL_(continuous))
|
|
MAKE_ENUM(enum_off_time_date_manual, FL_(off), FL_(time), FL_(date), FL_(manual))
|
|
MAKE_ENUM(enum_comfort, FL_(hot), FL_(eco), FL_(intelligent))
|
|
MAKE_ENUM(enum_comfort1, FL_(high_comfort), FL_(eco))
|
|
MAKE_ENUM(enum_comfort2, FL_(eco), FL_(high_comfort))
|
|
MAKE_ENUM(enum_flow, FL_(off), FL_(flow), FL_(bufferedflow), FL_(buffer), FL_(layeredbuffer))
|
|
MAKE_ENUM(enum_reset, FL_(dash), FL_(maintenance), FL_(error), FL_(history), FL_(message), FL_(hp_error), FL_(burn_starts), FL_(factory))
|
|
MAKE_ENUM(enum_maxHeat, FL_(0kW), FL_(2kW), FL_(3kW), FL_(4kW), FL_(6kW), FL_(9kW), FL_(12kW), FL_(15kW))
|
|
MAKE_ENUM(enum_maxHeat1, FL_(0kW), FL_(3kW), FL_(6kW), FL_(9kW))
|
|
MAKE_ENUM(enum_maxHeat2, FL_(3kW), FL_(6kW), FL_(9kW))
|
|
MAKE_ENUM(enum_pumpMode, FL_(proportional), FL_(deltaP1), FL_(deltaP2), FL_(deltaP3), FL_(deltaP4))
|
|
MAKE_ENUM(enum_pumpCharacter, FL_(proportional), FL_(pressure1), FL_(pressure2), FL_(pressure3), FL_(pressure4), FL_(pressure5), FL_(pressure6))
|
|
MAKE_ENUM(enum_hpPumpMode, FL_(auto), FL_(continuous))
|
|
MAKE_ENUM(enum_pumpMode2, FL_(pumpstep), FL_(consthigh), FL_(constmed), FL_(constlow), FL_(prophigh), FL_(proplow))
|
|
|
|
// thermostat lists
|
|
MAKE_ENUM(enum_ibaMainDisplay, FL_(internal_temperature), FL_(internal_setpoint), FL_(external_temperature), FL_(burner_temperature), FL_(ww_temperature), FL_(functioning_mode), FL_(time), FL_(date), FL_(smoke_temperature))
|
|
MAKE_ENUM(enum_ibaMainDisplayJ, FL_(ww_temperature), FL_(date), FL_(external_temperature))
|
|
MAKE_ENUM(enum_ibaLanguage, FL_(german), FL_(dutch), FL_(french), FL_(italian))
|
|
MAKE_ENUM(enum_ibaLanguageJ, FL_(german), FL_(italian), FL_(french), FL_(dutch))
|
|
MAKE_ENUM(enum_ibaLanguage_RC30, FL_(german), FL_(dutch))
|
|
MAKE_ENUM(enum_floordrystatus, FL_(off), FL_(start), FL_(heat), FL_(hold), FL_(cool), FL_(end))
|
|
MAKE_ENUM(enum_ibaBuildingType, FL_(light), FL_(medium), FL_(heavy))
|
|
MAKE_ENUM(enum_PID, FL_(fast), FL_(medium), FL_(slow))
|
|
MAKE_ENUM(enum_heatup, FL_(slow), FL_(medium), FL_(fast))
|
|
MAKE_ENUM(enum_wwMode, FL_(off), FL_(normal), FL_(comfort), FL_(auto), FL_(own_prog))
|
|
MAKE_ENUM(enum_wwCircMode, FL_(off), FL_(on), FL_(auto), FL_(own_prog))
|
|
MAKE_ENUM(enum_wwMode2, FL_(off), FL_(on), FL_(auto))
|
|
MAKE_ENUM(enum_wwMode3, FL_(on), FL_(off), FL_(auto))
|
|
MAKE_ENUM(enum_wwMode4, FL_(off), FL_(ecoplus), FL_(eco), FL_(comfort), FL_(auto))
|
|
MAKE_ENUM(enum_wwMode5, FL_(normal), FL_(comfort), FL_(ecoplus)) // Rego3000
|
|
MAKE_ENUM(enum_wwMode6, FL_(off), FL_(comfort), FL_(auto)) // CR120
|
|
MAKE_ENUM(enum_wwModeType, FL_(off), FL_(eco), FL_(comfort), FL_(ecoplus))
|
|
MAKE_ENUM(enum_heatingtype, FL_(off), FL_(radiator), FL_(convector), FL_(floor))
|
|
MAKE_ENUM(enum_heatingtype1, FL_(off), FL_(curve), FL_(radiator), FL_(convector), FL_(floor))
|
|
MAKE_ENUM(enum_heatingtype2, FL_(off), FL_(radiator), FL_(convector), FL_(floor), FL_(roomflow), FL_(roomload))
|
|
MAKE_ENUM(enum_summermode, FL_(summer), FL_(auto), FL_(winter))
|
|
MAKE_ENUM(enum_hpoperatingmode, FL_(off), FL_(auto), FL_(heating), FL_(cooling))
|
|
MAKE_ENUM(enum_summer, FL_(winter), FL_(summer))
|
|
MAKE_ENUM(enum_operatingstate, FL_(heating), FL_(off), FL_(cooling))
|
|
MAKE_ENUM(enum_hpmode, FL_(heating), FL_(cooling), FL_(heatandcool))
|
|
|
|
MAKE_ENUM(enum_mode, FL_(manual), FL_(auto)) // RC100, RC300, RC310
|
|
MAKE_ENUM(enum_mode2, FL_(off), FL_(manual), FL_(auto)) // RC20, RC30, BC400
|
|
MAKE_ENUM(enum_mode3, FL_(night), FL_(day), FL_(auto)) // RC35, RC30_N, RC25, RC20_N
|
|
MAKE_ENUM(enum_mode4, FL_(nofrost), FL_(eco), FL_(heat), FL_(auto)) // JUNKERS
|
|
MAKE_ENUM(enum_mode5, FL_(auto), FL_(off)) // CRF
|
|
MAKE_ENUM(enum_mode6, FL_(nofrost), FL_(night), FL_(day)) // RC10
|
|
MAKE_ENUM(enum_mode7, FL_(off), FL_(manual)) // CR11
|
|
MAKE_ENUM(enum_mode8, FL_(auto), FL_(heat), FL_(cool), FL_(off)) // SRC room thermostats
|
|
MAKE_ENUM(enum_mode_ha, FL_(off), FL_(heat), FL_(auto)) // HA climate
|
|
|
|
MAKE_ENUM(enum_modetype, FL_(eco), FL_(comfort))
|
|
MAKE_ENUM(enum_modetype3, FL_(night), FL_(day))
|
|
MAKE_ENUM(enum_modetype4, FL_(nofrost), FL_(eco), FL_(heat))
|
|
MAKE_ENUM(enum_modetype5, FL_(off), FL_(on))
|
|
|
|
MAKE_ENUM(enum_reducemode, FL_(nofrost), FL_(reduce), FL_(room), FL_(outdoor))
|
|
MAKE_ENUM(enum_reducemode1, FL_(outdoor), FL_(room), FL_(reduce)) // RC310 values: 1-3
|
|
MAKE_ENUM(enum_nofrostmode, FL_(off), FL_(outdoor), FL_(room))
|
|
MAKE_ENUM(enum_nofrostmode1, FL_(room), FL_(outdoor), FL_(room_outdoor))
|
|
|
|
MAKE_ENUM(enum_controlmode, FL_(optimized), FL_(simple), FL_(na), FL_(room), FL_(power))
|
|
MAKE_ENUM(enum_controlmode1, FL_(weather_compensated), FL_(outside_basepoint), FL_(na), FL_(room), FL_(power), FL_(constant)) // RC310 1-4
|
|
MAKE_ENUM(enum_controlmode2, FL_(outdoor), FL_(room))
|
|
MAKE_ENUM(enum_controlmode3, FL_(off), FL_(unmixed), FL_(unmixedIPM), FL_(mixed))
|
|
MAKE_ENUM(enum_control, FL_(off), FL_(rc20), FL_(rc3x))
|
|
MAKE_ENUM(enum_j_control, FL_(off), FL_(fb10), FL_(fb100))
|
|
MAKE_ENUM(enum_roomsensor, FL_(extern), FL_(intern), FL_(auto))
|
|
MAKE_ENUM(enum_roominfluence, FL_(off), FL_(intern), FL_(extern), FL_(auto))
|
|
MAKE_ENUM(enum_control1, FL_(rc310), FL_(rc200), FL_(rc100), FL_(rc100h), FL_(tc100))
|
|
MAKE_ENUM(enum_control2, FL_(off), FL_(dash), FL_(rc100), FL_(rc100h), FL_(dash), FL_(rc120rf), FL_(rc220), FL_(single)) // BC400
|
|
MAKE_ENUM(enum_control3, FL_(off), FL_(dash), FL_(cr10), FL_(cr10h), FL_(dash), FL_(cr20rf), FL_(rt800), FL_(single)) // UI800
|
|
|
|
MAKE_ENUM(enum_switchmode, FL_(off), FL_(eco), FL_(comfort), FL_(heat))
|
|
MAKE_ENUM(enum_switchProgMode, FL_(level), FL_(absolute))
|
|
|
|
MAKE_ENUM(enum_dayOfWeek, FL_(day_mo), FL_(day_tu), FL_(day_we), FL_(day_th), FL_(day_fr), FL_(day_sa), FL_(day_su), FL_(all))
|
|
MAKE_ENUM(enum_progMode2, FL_(own_1), FL_(family), FL_(morning), FL_(evening), FL_(am), FL_(pm), FL_(midday), FL_(singles), FL_(seniors), FL_(new), FL_(own_2))
|
|
MAKE_ENUM(enum_progMode3, FL_(family), FL_(morning), FL_(evening), FL_(am), FL_(pm), FL_(midday), FL_(singles), FL_(seniors))
|
|
MAKE_ENUM(enum_hybridStrategy, FL_(co2_optimized), FL_(cost_optimized), FL_(outside_temp_switched), FL_(co2_cost_mix))
|
|
MAKE_ENUM(enum_hybridStrategy1, FL_(cost_optimized), FL_(co2_optimized), FL_(outside_temp_alt), FL_(outside_temp_par), FL_(hp_preferred), FL_(boiler_only))
|
|
MAKE_ENUM(enum_lowNoiseMode, FL_(off), FL_(reduced_output), FL_(switchoff), FL_(perm))
|
|
|
|
// heat pump
|
|
MAKE_ENUM(enum_hpactivity, FL_(off), FL_(heating), FL_(cooling), FL_(hot_water), FL_(pool), FL_(pool_heating), FL_(defrost), FL_(compressor_alarm)) // BV name COMPRESSOR_E21_STATUS
|
|
MAKE_ENUM(enum_hpactivity1, FL_(off), FL_(heating), FL_(hot_water), FL_(defrost), FL_(compressor_alarm))
|
|
MAKE_ENUM(enum_silentMode, FL_(off), FL_(auto), FL_(on))
|
|
MAKE_ENUM(enum_4way, FL_(cool_defrost), FL_(heat_ww))
|
|
MAKE_ENUM(enum_auxHeaterSource, FL_(not_installed), FL_(el_heater), FL_(exclusive), FL_(parallel), FL_(hybrid))
|
|
|
|
// solar
|
|
MAKE_ENUM(enum_solarmode, FL_(constant), FL_(pwm), FL_(analog))
|
|
MAKE_ENUM(enum_collectortype, FL_(flat), FL_(vacuum))
|
|
MAKE_ENUM(enum_wwStatus2, FL_(BLANK), FL_(BLANK), FL_(BLANK), FL_(no_heat), FL_(BLANK), FL_(BLANK), FL_(heatrequest), FL_(BLANK), FL_(disinfecting), FL_(hold))
|
|
|
|
// mixer
|
|
MAKE_ENUM(enum_shunt, FL_(stopped), FL_(opening), FL_(closing), FL_(open), FL_(close))
|
|
MAKE_ENUM(enum_wwProgMode, FL_(std_prog), FL_(own_prog))
|
|
|
|
// AM200 lists
|
|
MAKE_ENUM(enum_vr2Config, FL_(off), FL_(bypass))
|
|
MAKE_ENUM(enum_aPumpSignal, FL_(off), FL_(pwm), FL_(pwm_invers))
|
|
MAKE_ENUM(enum_bufBypass, FL_(no), FL_(mixer), FL_(valve))
|
|
MAKE_ENUM(enum_blockMode, FL_(off), FL_(auto), FL_(blocking))
|
|
MAKE_ENUM(enum_bufConfig, FL_(off), FL_(monovalent), FL_(bivalent))
|
|
MAKE_ENUM(enum_blockTerm, FL_(n_o), FL_(n_c))
|
|
|
|
// Ventilation
|
|
MAKE_ENUM(enum_ventMode, FL_(auto), FL_(off), FL_(L1), FL_(L2), FL_(L3), FL_(L4), FL_(demand), FL_(sleep), FL_(intense), FL_(bypass), FL_(partymode), FL_(fireplace))
|
|
|
|
// water
|
|
MAKE_ENUM(enum_errorDisp, FL_(off), FL_(normal), FL_(inverted))
|
|
|
|
// SRC plus
|
|
MAKE_ENUM(enum_icons, FL_(none), FL_(chefhat), FL_(sofasingle), FL_(bowlmix), FL_(bedsingle), FL_(beddouble), FL_(teddybear), FL_(shower), FL_(laptop), FL_(door), FL_(palette), FL_(washingmachine), FL_(bookshelf))
|
|
|
|
#pragma GCC diagnostic pop
|
|
|
|
// clang-format on
|