templates, I2C/1Wire reset tune, bins

lighthub/owTerm.cpp

@@ -127,8 +127,8 @@ int owSetup() {
     if (oneWire) return true;    // Already initialized
 #ifdef DS2482_100_I2C_TO_1W_BRIDGE
 
-    debugSerial<<F("DS2482_100_I2C_TO_1W_BRIDGE init")<<endl;
-    debugSerial<<F("Free:")<<freeRam()<<endl;
+    debugSerial<<F("1WT: DS2482_100_I2C_TO_1W_BRIDGE init")<<endl;
+    //debugSerial<<F("Free:")<<freeRam()<<endl;
     oneWire = new OneWire;
 #else
     debugSerial.print(F("One wire setup on PIN:"));
@@ -146,7 +146,7 @@ if (!oneWire)
 #ifdef DS2482_100_I2C_TO_1W_BRIDGE
     Wire.begin();
     if (oneWire->checkPresence()) {
-        infoSerial.println(F("1WT: DS2482-100 present"));
+        infoSerial.println(F("1WT: DS2482-100 present, reset"));
         oneWire->deviceReset();
 #ifdef APU_OFF
         debugSerial.println(F("APU off"));
@@ -154,11 +154,11 @@ if (!oneWire)
         oneWire->setActivePullup();
 #endif
 
-        debugSerial.println(F("\tChecking for 1-Wire devices..."));
+       // debugSerial.println(F("\tChecking for 1-Wire devices..."));
         if (oneWire->wireReset())
-            debugSerial.println(F("\tReset done"));
+            debugSerial.println(F("1WT: Bus Reset done"));
         else 
-            debugSerial.println(F("\tDS2482 reset error"));    
+            debugSerial.println(F("1WT: Bus reset error"));    
         //return true;
     }   
         else 
@@ -229,22 +229,22 @@ int sensors_loop(void) {
         i2cReset();
         break;
 
-        case  DS2482_ERROR_TIMEOUT:
-        errorSerial<<F("1WT: timeout")<<endl;
-        oneWire->wireReset();
-        return INTERVAL_1W;
+        case  DS2482_ERROR_TIMEOUT: //Busy over time
+        errorSerial<<F("1WT: BUSY timeout")<<endl;
+        i2cReset();
+        break;
 
         default:
-        errorSerial<<F("1WT: error")<<endl;
-        oneWire->wireReset();
-        return INTERVAL_1W;
+        break;
     }
+    /*
     if (!oneWire->checkPresence()) 
     {
         infoSerial.println(F("1WT: lost DS2482-100"));
         i2cReset();
     }   
-            
+
+  */          
        
 #endif
 

lighthub/templateStr.h

@@ -2,6 +2,8 @@
 #define _TEMPLATE_STREAM_H_
 
 #include <Stream.h>
+#include <aJSON.h>
+#include <streamlog.h>
 //#define KEYLEN 8
 extern aJsonObject * topics;
 
@@ -30,6 +32,7 @@ public:
                         { 
                          str[pos+2+i]='\0';
                          val=resolveKey(str+pos+2);
+                         valpos=0;
                          str[pos+2+i]='}';
                          pos+=3+i;
                         }
@@ -83,8 +86,9 @@ public:
                  if (valObj->type == aJson_String) return valObj->valuestring;
 
                 }
-             if (suffix && (suffix<=suffixNum) && !strcmp(key,"sfx"))  
+             if (suffix && (suffix<suffixNum) && !strcmp(key,"sfx"))  
                             {
+                            //debugSerial<<F("Template: Suffix=")<<suffix<<endl;    
                             buffer[0]='/';       
                             strncpy_P(buffer+1,suffix_P[suffix],sizeof(buffer)-2);    
                             return buffer;

lighthub/utils.cpp

@@ -701,6 +701,11 @@ switch (cmdType)
     //        dict = aJson.createObject();
     //        aJson.addStringToObject(dict, "sfx", )
             suffix=_itemCmd.getSuffix();
+            if (!suffix)
+            {
+             if (_itemCmd.isCommand()) suffix=S_CMD;
+                else if (_itemCmd.isValue()) suffix = S_SET; 
+            }
             }
 
     //debugSerial << F("IN:") << (pin) << F(" : ") <<endl;
@@ -720,7 +725,7 @@ switch (cmdType)
     char addrstr[MQTT_TOPIC_LENGTH];
     //ts.setTimeout(0);
     addrstr[ts.readBytesUntil('\0',addrstr,sizeof(addrstr))]='\0';
-    debugSerial << F("Emit: ")<<emit->valuestring<<" "<<addrstr<< F(" -> ")<<emitCommand<<endl;    
+    debugSerial << F("Emit: <")<<emit->valuestring<<"> "<<addrstr<< F(" -> ")<<emitCommand<<endl;    
     /*
     TODO implement
     #ifdef WITH_DOMOTICZ
@@ -895,7 +900,7 @@ bool checkToken(char * token, char * data)
 
 
 bool i2cReset(){
-debugSerial.println("I2C Reset");
+debugSerial.println(F("I2C Reset"));
 
 Wire.endTransmission(true);
 #if  !defined(ARDUINO_ARCH_ESP8266)
@@ -911,19 +916,22 @@ pinMode(SDA,INPUT);
         pulse=!pulse;
         delay(10);//10us мкс
   }
+
+delay(20);
 Wire.begin();
 
 #ifdef DS2482_100_I2C_TO_1W_BRIDGE
 if (oneWire && oneWire->checkPresence())
 {        
         oneWire->deviceReset();
+        debugSerial.println(F("1WT: DS2482 present, reset"));  
 #ifndef APU_OFF
         oneWire->setActivePullup();
 #endif
         if (oneWire->wireReset())
-            debugSerial.println(F("\tReset done"));
+            debugSerial.println(F("1WT: Bus Reset done"));
         else 
-            debugSerial.println(F("\tDS2482 reset error"));   
+            debugSerial.println(F("1WT: Bus reset error"));   
 }
 #endif