andry/lighthub
1
0
Fork 0
mirror of https://github.com/anklimov/lighthub synced 2025-12-06 03:39:49 +03:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #19 from livello/patch

Browse Source 
clear EEPROM, laninit delay, clean platformio.ini
This commit is contained in:
Andrey Klimov
2018-05-19 15:09:30 +03:00
committed by GitHub
parent d1cab710ea dc110e0b79
commit 2b56dcd8dd
9 changed files with 7278 additions and 7300 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
README.md
View File

@@ -13,7 +13,7 @@ Lighthub allows connecting together:
* Modbus RTU devices (Currently, are deployed two types of Modbus devices: AC Dimmer and Ventilation set (Based on [Vacon 10 controller](http://files.danfoss.com/download/Drives/Vacon-10-Quick-Guide-DPD00714F1-UK.pdf))
* Simple DMX wall sensor panel [like this](https://aliexpress.com/item/New-Ltech-D8-LED-rgb-RGBW-touch-panel-controller-DMX512-controller-DC12-24V-4-zones-4/32800199589.html)
![alt text](LightHub.png "LightHub application diagram")
![alt text](docs/LightHubAppDiagram.png "LightHub application diagram")
Where is possible both, to configure local control/mapping between inputs and outputs (light, floor heating thermostats) and remote control from MQTT enabled software. At the moment, LightHub tested with following set of complementary free software:
* [Openhab or Openhab2 Smarthome software](http://www.openhab.org/)
@@ -116,7 +116,6 @@ cp build_flags_template.sh my_build_flags.sh
```
then edit, change or comment unnecessary sections and source it
```bash
nano my_build_flags.sh
source my_build_flags.sh
```
build and upload firmware for due|megaatmega2560|esp8266 board
@@ -146,7 +145,10 @@ platformio device monitor -b 115200
* MODBUS_DISABLE // disable Modbus support
* OWIRE_DISABLE // disable OneWire support
* ARTNET_ENABLE //Enable Artnet protocol support
* AVR_DMXOUT_PIN=18 // Set Pin for DMXOUT on megaatmega2560
* CONTROLLINO //Change Modbus port, direction pins and Wiznet SS pins to be working on [Controllino](http://controllino.biz/)
* LAN_INIT_DELAY=2000 // set lan init delay for Wiznet ethernet shield
# Default compilation behavior:
@@ -162,6 +164,7 @@ platformio device monitor -b 115200
* Modbus support enabled
* OneWire support enabled
* Artnet disabled
* LAN_INIT_DELAY=500 //ms
* Defailt MQTT input topic: /myhome/in
* Default MQTT topic to publish device status: /myhome/s_out
* Default Alarm output topic /alarm