andry/lighthub
1
0
Fork 0
mirror of https://github.com/anklimov/lighthub synced 2025-12-06 11:49:51 +03:00
Code Issues Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Andrey Klimov
2019-03-29 12:49:48 +03:00
committed by GitHub
parent 8aac733cd1
commit 3216131e96
1 changed files with 18 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

31
README.md
View File

@@ -1,14 +1,15 @@
# LightHub
is Flexible, Arduino-Mega/Arduino DUE/ESP8266 open-software and open-hardware SmartHome controller. [RU](https://geektimes.ru/post/295109/) [HOME-site RU](http://lazyhome.ru)
is Flexible, Arduino-Mega/Arduino DUE/ESP8266/ESP32 open-software and open-hardware SmartHome controller. [RU](https://geektimes.ru/post/295109/) [HOME-site RU](http://lazyhome.ru)
It may operate both:
* On [especially designed hardware board](http://www.lazyhome.ru/index.php/featurerequest) with 16 optocoupled digital inputs, 16 ESD protected digital/analog Inputs/outputs, 8 open-collector outputs (up to 0.5A/50V), DMX IN/OUT, MODBUS RTU and hardware 1-wire support circuit.
* On plain Arduino MEGA 2560, Arduino DUE, ESP8266 and even on [Controllino](http://controllino.biz/)
(Controllino and ESP8266 is not tested enough and in experimental stage yet)
* On plain Arduino MEGA 2560, Arduino DUE, ESP8266, ESP32 and even on [Controllino](http://controllino.biz/)
(Controllino is not tested enough)
Lighthub allows connecting together:
* Contact sensors (switches, buttons etc)
* Analog sensors (Leak detectors, Knobs etc)
* 1-Wire temperature sensors (up to 20 on single bus)
* Temperature/Humidity/CO2 sensors: DHT22, CS811, HDC1080
* Standard nonexpensive Relay board with TTL inputs, [like this](http://ali.pub/2zlosh) to control AC powered lamps, floor heaters, boilers etc
* [Standard nonexpensive LED dimmers](http://ali.pub/2zlokp) and [AC DMX-512 dimmers](http://ali.pub/2zlont)
* Modbus RTU devices (Currently, are deployed two types of Modbus devices: AC Dimmer and Ventilation set (Based on [Vacon 10 controller](http://files.danfoss.com/download/Drives/Vacon-10-Quick-Guide-DPD00714F1-UK.pdf))
@@ -51,12 +52,13 @@ Scalability of Lighthub is virtually unlimited: Setup so many controllers you ne
* WIZNET 5100 and 5500 Ethernets are supported
* Modbus on USART2
**ESP8266**: (Developed, working, but not tested in production)
**ESP8266, ESP32**: (Tested)
* DMX-OUT on USART1 TX
* DMX-IN - disabled - not possible to deploy in ESP8266
* Modbus - disabled. Might be configured in future on USART0 instead CLI/DEBUG
* Uses Wifi interface instead wired connection
**ESP32**, **NRF52840** : Still early development stage
**NRF52840** : Still early development stage
# Custom build flags
@@ -78,35 +80,38 @@ Scalability of Lighthub is virtually unlimited: Setup so many controllers you ne
* ESP_WIFI_AP=MYAP // esp wifi access point name
* ESP_WIFI_PWD=MYPWD // esp wifi access point password
* WIFI_MANAGER_DISABLE //Disable wifi manager for esp8266
* DHT_COUNTER_DISABLE //disable DHT, Counter, Uptime input support (for RAM savings on mega2560)
* COUNTER_DISABLE //disable Counter, Uptime input support (for RAM savings on mega2560)
* DHT_DISABLE //disable DHT input support (for RAM savings on mega2560)
* RESTART_LAN_ON_MQTT_ERRORS //reinit LAN if many mqtt errors occured
* DEVICE_NAME short handy device name which is used instead of mac for download config http://{MY_CONFIG_SERVER}/{DEVICE_NAME}_config.json
* SYSLOG_ENABLE enable UDP SYSLOG support feature(under DEVELOPMENT) that must be configured through config file
* WITH_PRINTEX_LIB use PrintEx library (develop experimental feature)
* CSSHDC_DISABLE //Disable CS811 and HDC1080 sensors support
# Default compilation behavior:
* Config server: lazyhome.ru
* Config server: lazyhome.ru (hosting of config files available for all registred users of portal - see MyDevices tab)
* Watchdog enabled
* 1-Wire communication with DS2482-100 I2C driver
* No SD
* Serial speed 115200
* Wiznet 5100 (for MEGA & DUE)
* Free Ram printing enabled
* de:ad:be:ef:fe:ff default MAC address
* de:ad:be:ef:fe:ff default MAC address for MEGA (on ESPx, DUE - using hardware defined MAC by default)
* DMX support enabled
* Modbus support enabled
* OneWire support enabled
* Artnet disabled
* LAN_INIT_DELAY=500 //ms
* Defailt MQTT input topic: /myhome/in
* Default MQTT topic to publish device status: /myhome/s_out
* Default Alarm output topic /alarm
* Defailt MQTT broadcast input topic: myhome/in
* Default MQTT topic to publish device status: myhome/s_out
* Default Alarm output topic: alarm
* DHT, Counter, Uptime support enabled
* Wifi manager for esp8266 enabled
* Wifi manager for esp8266/esp32 enabled
* RESTART_LAN_ON_MQTT_ERRORS disabled
* DEVICE_NAME disabled
* SYSLOG_ENABLE disabled
* WITH_PRINTEX_LIB diabled, using Streaming library
* WITH_PRINTEX_LIB disabled, using Streaming library
* CS811 and HDC1080 sensors support are enabled