Continue modbus developing, DMXbuf corruption fix

lighthub/dmx.cpp

@@ -260,12 +260,13 @@ dmxout.setTxMaxChannels(channels);
 #ifndef DMX_DISABLE
 for (int i=1;i<=channels;i++) DmxWrite(i,0);
 #endif
-
+debugSerial<<F("DMXOut. Free:")<<freeRam()<<endl;
 #ifdef DMX_SMOOTH
 if (DMXinterimBuf) delete DMXinterimBuf;
-DMXinterimBuf = new uint8_t [channels];
+DMXinterimBuf = new uint8_t [channels+1];
 DMXOUT_Channels=channels;
 for (int i=1;i<=channels;i++) DMXinterimBuf[i]=0;
+debugSerial<<F("DMXInterim. Free:")<<freeRam()<<endl;
 #endif
 }
 

lighthub/itemCmd.cpp

@@ -822,6 +822,16 @@ return false;
 
   }
 
+int itemCmd::doMappingCmd(aJsonObject *mappingData)
+  {
+
+
+  }
+  int itemCmd::doReverseMappingCmd (aJsonObject *mappingData)
+
+  {
+
+  }
 
 char * itemCmd::toString(char * Buffer, int bufLen, int sendFlags )
      {

lighthub/itemCmd.h

@@ -230,6 +230,8 @@ public:
 
   int doMapping(aJsonObject *mappingData);
   int doReverseMapping (aJsonObject *mappingData);
+  int doMappingCmd(aJsonObject *mappingData);
+  int doReverseMappingCmd (aJsonObject *mappingData);
 
 
   };

lighthub/main.cpp

@@ -1033,6 +1033,7 @@ setupSyslog();
     if (dmxoutArr &&  (numParams=aJson.getArraySize(dmxoutArr)) >=1 ) {
         DMXoutSetup(maxChannels = aJson.getArrayItem(dmxoutArr, numParams-1)->valueint);
         infoSerial<<F("DMX out started. Channels: ")<<maxChannels<<endl;
+        debugSerial<<F("Free:")<<freeRam()<<endl;
     }
 #endif
 #ifdef _modbus
@@ -1467,17 +1468,21 @@ lan_status loadConfigFromHttp(int arg_cnt, char **args)
     htclient.stop();
     wdt_res();
     infoSerial<<F("HTTP Status code: ")<<responseStatusCode<<endl;
-    //debugSerial<<"GET Response: ");
+    
 //delay(1000);
     if (responseStatusCode == 200) {
+        debugSerial<<F("GET Response: ")<<response<<endl;
+        debugSerial<<F("Free:")<<freeRam()<<endl;
         cleanConf();
         debugSerial<<F("Configuration cleaned")<<endl;
+        debugSerial<<F("Free:")<<freeRam()<<endl;
         root = aJson.parse((char *) response.c_str());
 
         if (!root) {
             errorSerial<<F("Config parsing failed\n");
             return READ_RE_CONFIG;//-11; //Load from NVRAM
         } else {
+            debugSerial<<F("Parsed. Free:")<<freeRam()<<endl;
             //debugSerial<<response;
             applyConfig();
             infoSerial<<F("Done.\n");

lighthub/modules/out_modbus.cpp

@@ -374,6 +374,11 @@ int out_Modbus::getChanType()
 }
 
 
+//!Control unified Modbus item  
+// Priority of selection sub-items control to:
+// 1. if defined standard suffix Code inside cmd
+// 2. custom textual subItem
+// 3. non-standard numeric  suffix Code equal param id
 
 int out_Modbus::Ctrl(itemCmd cmd,   char* subItem, bool toExecute)
 {
@@ -381,6 +386,37 @@ int out_Modbus::Ctrl(itemCmd cmd,   char* subItem, bool toExecute)
 //bool toExecute = (chActive>0);
 //itemCmd st(ST_UINT32,CMD_VOID);
 int suffixCode = cmd.getSuffix();
+aJsonObject *templateParamObj = NULL;
+short mappedCmdVal = 0;
+
+// trying to find parameter in template with name == subItem (NB!! standard suffixes dint working here)
+if (subItem && strlen (subItem)) templateParamObj = aJson.getObjectItem(store->parameters, subItem);
+
+if (!templateParamObj)
+{
+  // Trying to find template parameter where id == suffixCode
+ templateParamObj = store->parameters->child;
+
+  while (templateParamObj)
+          {
+            //aJsonObject *regObj = aJson.getObjectItem(paramObj, "reg");
+            aJsonObject *idObj = aJson.getObjectItem(templateParamObj, "id");
+            if (idObj->type==aJson_Int && idObj->valueint == suffixCode) break;
+
+            aJsonObject *mapObj = aJson.getObjectItem(templateParamObj, "mapcmd");
+            if (mapObj && (mappedCmdVal = cmd.doReverseMappingCmd(mapObj))) break;
+
+            templateParamObj=templateParamObj->next;                       
+          }
+}
+
+
+//                    aJsonObject *typeObj = aJson.getObjectItem(paramObj, "type");
+//                    aJsonObject *mapObj = aJson.getObjectItem(paramObj, "map");
+//                    aJsonObject * itemParametersObj = aJson.getArrayItem(item->itemArg, 2);
+//                    uint16_t data = node.getResponseBuffer(posInBuffer);
+
+
 
 if (cmd.isCommand() && !suffixCode) suffixCode=S_CMD; //if some known command find, but w/o correct suffix - got it
 

lighthub/owTerm.cpp

@@ -95,6 +95,7 @@ int owSetup(owChangedType owCh) {
     if (oneWire) return true;    // Already initialized
 #ifdef DS2482_100_I2C_TO_1W_BRIDGE
     debugSerial<<F("DS2482_100_I2C_TO_1W_BRIDGE init")<<endl;
+    debugSerial<<F("Free:")<<freeRam()<<endl;
     oneWire = new OneWire;
 #else
     debugSerial.print(F("One wire setup on PIN:"));
@@ -102,12 +103,25 @@ int owSetup(owChangedType owCh) {
     oneWire = new OneWire (USE_1W_PIN);
 #endif
 
+if (!oneWire)
+                {
+                    errorSerial<<F("Error 1-w init #1")<<endl;
+                    return false;
+                }
 // Pass our oneWire reference to Dallas Temperature.
 //    sensors = new DallasTemperature(oneWire);
 
     term = new DeviceAddress[t_max];
+    debugSerial<<F("Term. Free:")<<freeRam()<<endl;
 //regs = new    int [t_max];
     wstat = new uint16_t[t_max];
+    debugSerial<<F("wstat. Free:")<<freeRam()<<endl;
+if (!term || ! wstat)
+                {
+                    errorSerial<<F("Error 1-w init #2 Free:")<<freeRam()<<endl;
+                    return false;
+                }
+
     owChanged = owCh;
 
 #ifdef DS2482_100_I2C_TO_1W_BRIDGE

lighthub/utils.cpp

@@ -550,6 +550,9 @@ switch (cmd->type)
   break;
   case aJson_Object:
 {
+aJsonObject *act = aJson.getObjectItem(cmd, "act");            
+if (act) return executeCommand(act,toggle,_itemCmd);
+
 aJsonObject *item = aJson.getObjectItem(cmd, "item");
 aJsonObject *emit = aJson.getObjectItem(cmd, "emit");
 aJsonObject *icmd = NULL;

platformio.ini

@@ -23,13 +23,13 @@ default_envs =
 ;    mega2560-5500
 
 ; LightHub controller HW revision 2.1 and above (Wiznet 5500 CS on pin 53)
-;    lighthub21
+    lighthub21
 
 ; Arduino DUE  + Ethernet shield Wiznet 5100
 ;    due-5100
 
 ; Generic DUE
-     due
+;     due
 ; Arduino DUE + Ethernet shield Wiznet 5500
 ;   due-5500
 
@@ -56,6 +56,7 @@ default_envs =
 [env:nrf52840-5500]
 platform = nordicnrf52
 board = nrf52840_dk
+monitor_baud = 115200
 ;board_build.variant = breakout
 ;upload_protocol = mbed
 ;upload_port = /dev/cu.SLAB_USBtoUART
@@ -118,6 +119,7 @@ lib_deps =
 [env:m5stack]
 platform = espressif32
 board = m5stack-core-esp32
+monitor_baud = 115200
 framework = arduino
 upload_speed = 921600
 build_flags = !python get_build_flags.py m5stack
@@ -170,6 +172,7 @@ lib_deps =
 [env:esp32-wifi]
 platform = espressif32
 framework = arduino
+monitor_baud = 115200
 monitor_filters = esp32_exception_decoder
 build_type = debug
 ;board = pico32
@@ -227,6 +230,7 @@ lib_deps =
 platform = atmelsam
 framework = arduino
 board = due
+monitor_baud = 115200
 build_flags = !python get_build_flags.py due-5100
 lib_ignore =
         ;DS2482_OneWire   //UNCOMMENT for software 1-wire driver
@@ -276,6 +280,7 @@ lib_deps =
 platform = atmelsam
 framework = arduino
 board = due
+monitor_baud = 115200
 build_flags = !python get_build_flags.py due
 ; Need to place arduinoOTA utility from Arduino IDE distribution to folder in your PATH
 ;fix address and password
@@ -330,6 +335,7 @@ lib_deps =
 [env:mega2560slim-5100]
 platform = atmelavr
 board = megaatmega2560
+monitor_baud = 115200
 ;upload_port = net:192.168.88.31:23
 upload_port = net:192.168.88.2:23000
 framework = arduino
@@ -376,6 +382,7 @@ lib_deps =
 [env:mega2560-5500]
 platform = atmelavr
 board = megaatmega2560
+monitor_baud = 115200
 framework = arduino
 build_flags = !python get_build_flags.py mega2560-5500
 lib_ignore =
@@ -421,6 +428,7 @@ lib_deps =
 platform = espressif8266
 framework = arduino
 board = nodemcuv2
+monitor_baud = 115200
 upload_protocol = esptool
 
 ;upload_protocol = espota
@@ -482,6 +490,7 @@ lib_deps =
 [env:mega2560-5100]
 platform = atmelavr
 board = megaatmega2560
+monitor_baud = 115200
 framework = arduino
 upload_port = net:192.168.88.2:23000
 build_flags = !python get_build_flags.py mega2560-5100
@@ -528,6 +537,7 @@ lib_deps =
 platform = atmelsam
 framework = arduino
 board = due
+monitor_baud = 115200
 ;build_flags = !bash check_custom_build_flags_due-5500.sh
 build_flags = !python get_build_flags.py due-5500
 lib_ignore =
@@ -579,10 +589,11 @@ lib_deps =
 platform = atmelsam
 framework = arduino
 board = due
+monitor_baud = 115200
 build_flags = !python get_build_flags.py lighthub21
 ;upload_command = arduinoOTA -address 192.168.11.172 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE
-upload_command = arduinoOTA -address 192.168.88.28 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE
-upload_protocol = custom
+;upload_command = arduinoOTA -address 192.168.88.28 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE
+;upload_protocol = custom
 lib_ignore =
        ;DS2482_OneWire   //UNCOMMENT for software 1-wire driver
         DHT sensor library for ESPx
@@ -634,6 +645,7 @@ lib_deps =
 [env:controllino]
 platform = atmelavr
 board = megaatmega2560
+monitor_baud = 115200
 framework = arduino
 build_flags = !python get_build_flags.py controllino
 lib_ignore =
@@ -680,6 +692,7 @@ lib_deps =
 platform = ststm32
 framework = arduino
 board = nucleo_f103rb
+monitor_baud = 115200
 upload_protocol = stlink
 debug_tool = stlink
 build_flags = !python get_build_flags.py stm32-enc2860