DMX Modbus OneWire support now can be disabled

README.md

@@ -125,6 +125,9 @@ platformio device monitor -b 115200
 * Wiz5500 //Use Wiznet 5500 library instead Wiznet 5100
 * DISABLE_FREERAM_PRINT // disable printing free Ram in bytes
 * CUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:00 //set firmware macaddress
+* DMX_DISABLE //disable DMX support
+* MODBUS_DISABLE // disable Modbus support
+* OWIRE_DISABLE // disable OneWire support
 
 Look at build_flags_template.sh for customizing.
 
@@ -137,3 +140,6 @@ Look at build_flags_template.sh for customizing.
 * Wiznet 5100 (for MEGA & DUE)
 * Free Ram printing enabled
 * de:ad:be:ef:fe:00
+* DMX support enabled
+* Modbus support enabled
+* OneWire support enabled

build_flags_template.sh

@@ -14,5 +14,8 @@
  export FLAGS="$FLAGS -DWiz5500"
  export FLAGS="$FLAGS -DDISABLE_FREERAM_PRINT"
  export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:00"
+ export FLAGS="$FLAGS -DDMX_DISABLE"
+ export FLAGS="$FLAGS -DMODBUS_DISABLE"
+ export FLAGS="$FLAGS -DOWIRE_DISABLE"
  export PLATFORMIO_BUILD_FLAGS="$FLAGS"
  unset FLAGS

lighthub/main.cpp

@@ -122,9 +122,10 @@ DueFlashStorage EEPROM;
 #define wdt_en()
 #define wdt_dis()
 
-
 #else
 
+#include "Dhcp.h"
+
 #ifdef Wiz5500
 #include <Ethernet2.h>
 #else
@@ -447,31 +448,24 @@ if((wifiMulti.run() == WL_CONNECTED)) lanStatus=1;
         wdt_dis();
         if (lanStatus > 0)
             switch (Ethernet.maintain()) {
-                case 1:
+                case DHCP_CHECK_RENEW_FAIL:
                     //renewed fail
                     Serial.println(F("Error: renewed fail"));
                     lanStatus = -10;
                     break;
 
-                case 2:
-                    //renewed success
+                case DHCP_CHECK_RENEW_OK:
                     Serial.println(F("Renewed success"));
-
-                    //print your local IP address:
                     printIPAddress();
                     break;
 
-                case 3:
-                    //rebind fail
+                case DHCP_CHECK_REBIND_FAIL:
                     Serial.println(F("Error: rebind fail"));
                     lanStatus = -10;
                     break;
 
-                case 4:
-                    //rebind success
+                case DHCP_CHECK_REBIND_OK:
                     Serial.println(F("Rebind success"));
-
-                    //print your local IP address:
                     printIPAddress();
                     break;
 

lighthub/options.h

@@ -1,8 +1,17 @@
 // Configuration of drivers enabled
+#ifndef DMX_DISABLE
 #define _dmxin
 #define _dmxout
+#endif
+
+#ifndef OWIRE_DISABLE
 #define _owire
+#endif
+
+#ifndef MODBUS_DISABLE
 #define _modbus
+#endif
+
 #define _artnet
 
 #if defined(ESP8266)

lighthub/utils.cpp

@@ -19,6 +19,7 @@ e-mail    anklimov@gmail.com
 */
 
 #include "utils.h"
+
 #if defined(__SAM3X8E__)
 #include <malloc.h>
 #endif
@@ -29,53 +30,52 @@ extern "C" {
 }
 #endif
 
-void PrintBytes(uint8_t* addr, uint8_t count, bool newline) {
-  for (uint8_t i = 0; i < count; i++) {
-    Serial.print(addr[i]>>4, HEX);
-    Serial.print(addr[i]&0x0f, HEX);
-  }
-  if (newline)
-    Serial.println();
+void PrintBytes(uint8_t *addr, uint8_t count, bool newline) {
+    for (uint8_t i = 0; i < count; i++) {
+        Serial.print(addr[i] >> 4, HEX);
+        Serial.print(addr[i] & 0x0f, HEX);
+    }
+    if (newline)
+        Serial.println();
 }
 
-const char HEXSTR[]="0123456789ABCDEF";
+const char HEXSTR[] = "0123456789ABCDEF";
 
-void SetBytes(uint8_t* addr, uint8_t count, char * out) {
- // Serial.println("SB:");
-  for (uint8_t i = 0; i < count; i++) {
-    *(out++)=HEXSTR[(addr[i]>>4)];
-    *(out++)=HEXSTR[(addr[i]&0x0f)];
-  }
-  *out=0;
+void SetBytes(uint8_t *addr, uint8_t count, char *out) {
+    // Serial.println("SB:");
+    for (uint8_t i = 0; i < count; i++) {
+        *(out++) = HEXSTR[(addr[i] >> 4)];
+        *(out++) = HEXSTR[(addr[i] & 0x0f)];
+    }
+    *out = 0;
 
 }
 
 
-byte HEX2DEC(char i)
-{ byte v;  
-if      ('a' <= i && i <='f') { v=i-97+10; }
-        else if ('A' <= i && i <='F') { v=i-65+10; }
-        else if ('0' <= i && i <='9') { v=i-48;    }
-  return v;
-  }
+byte HEX2DEC(char i) {
+    byte v;
+    if ('a' <= i && i <= 'f') { v = i - 97 + 10; }
+    else if ('A' <= i && i <= 'F') { v = i - 65 + 10; }
+    else if ('0' <= i && i <= '9') { v = i - 48; }
+    return v;
+}
 
-void SetAddr(char * out,  uint8_t* addr) {
+void SetAddr(char *out, uint8_t *addr) {
 
-  for (uint8_t i = 0; i < 8; i++) {
-    *addr=HEX2DEC(*out++)<<4;
-    *addr++|=HEX2DEC(*out++);
-     }
+    for (uint8_t i = 0; i < 8; i++) {
+        *addr = HEX2DEC(*out++) << 4;
+        *addr++ |= HEX2DEC(*out++);
+    }
 }
 
 
-int getInt(char ** chan)
-{
-  int ch = atoi(*chan);
-  *chan=strchr(*chan,',');
+int getInt(char **chan) {
+    int ch = atoi(*chan);
+    *chan = strchr(*chan, ',');
 
-  if (*chan) *chan+=1;
-  //Serial.print(F("Par:")); Serial.println(ch);
-  return ch;
+    if (*chan) *chan += 1;
+    //Serial.print(F("Par:")); Serial.println(ch);
+    return ch;
 
 }
 
@@ -98,25 +98,25 @@ unsigned long freeRam ()
 extern char _end;
 extern "C" char *sbrk(int i);
 
-unsigned long freeRam()
-{
-  char *ramstart = (char *) 0x20070000;
-  char *ramend = (char *) 0x20088000;
-  char *heapend = sbrk(0);
-  register char * stack_ptr asm( "sp" );
-  struct mallinfo mi = mallinfo();
+unsigned long freeRam() {
+    char *ramstart = (char *) 0x20070000;
+    char *ramend = (char *) 0x20088000;
+    char *heapend = sbrk(0);
+    register char *stack_ptr asm( "sp" );
+    struct mallinfo mi = mallinfo();
 
-  return stack_ptr - heapend + mi.fordblks; 
+    return stack_ptr - heapend + mi.fordblks;
 }
- #endif
 
-void parseBytes(const char* str, char separator, byte* bytes, int maxBytes, int base) {
-  for (int i = 0; i < maxBytes; i++) {
-    bytes[i] = strtoul(str, NULL, base);  // Convert byte
-    str = strchr(str, separator);               // Find next separator
-    if (str == NULL || *str == '\0') {
-      break;                            // No more separators, exit
+#endif
+
+void parseBytes(const char *str, char separator, byte *bytes, int maxBytes, int base) {
+    for (int i = 0; i < maxBytes; i++) {
+        bytes[i] = strtoul(str, NULL, base);  // Convert byte
+        str = strchr(str, separator);               // Find next separator
+        if (str == NULL || *str == '\0') {
+            break;                            // No more separators, exit
+        }
+        str++;                                // Point to next character after separator
     }
-    str++;                                // Point to next character after separator
-  }
 }

platformio.ini

@@ -10,8 +10,8 @@
 [platformio]
 src_dir = lighthub
 env_default =
-          megaatmega2560
-;         due
+;          megaatmega2560
+         due
 ;         esp8266
 
 [env:due]