pre-release, save2flash, mdns bugs, dmx, .....

build-flags/build_flags_lighthub21

@@ -12,3 +12,15 @@
 -DARDUINO_OTA_MDNS_DISABLE
 -DMDNS_ENABLE
 -DTIMER_INT
+
+#Put modbus exchange in debug hex dump 
+#-DMODBUS_DEBUG
+
+#Uncomment next 3 lines  (or add it to custom build flags) to use Native USB port for debug/CLI instead Serial
+#-DdebugSerialPort=SerialUSB
+#-DSerialPortType=Serial_
+#-DSERIAL_BAUD=0
+
+#Default SerialDebug settings
+#-DSERIAL_BAUD=115200
+#-DdebugSerialPort=Serial

build-flags/build_flags_stm32

@@ -10,3 +10,14 @@
 -DAC_DISABLE
 -DPID_DISABLE
 -DdebugSerialPort=SerialUSB
+-DSerialPortType=USBSerial
+-DSERIAL_BAUD=0
+
+-DPIO_FRAMEWORK_ARDUINO_ENABLE_CDC
+-DUSBCON
+#-DUSBD_VID=0x0483
+#-DUSBD_PID=0x5740
+#-DUSB_MANUFACTURER="Unknown"
+#-DUSB_PRODUCT="\"BLUEPILL_F103C8\""
+#-DHAL_PCD_MODULE_ENABLED
+#-D USBD_USE_CDC

compiled/stm32/upload.sh

@@ -0,0 +1 @@
+dfu-util -D firmware.bin -a 1 

lighthub/bright.cpp

@@ -10,10 +10,10 @@ uint8_t getBright255(uint8_t percent255)
   /*
   int val = stepvar[index];
   if (val>255) val=255;
-  Serial.print(F("Bright:"));
+  debugSerialPort.print(F("Bright:"));
-  Serial.print(percent);
+  debugSerialPort.print(percent);
-  Serial.print(F("->"));
+  debugSerialPort.print(F("->"));
-  Serial.println(val);
+  debugSerialPort.println(val);
   return val;*/
   #endif
 }

lighthub/config.cpp

@@ -1,49 +1,5 @@
 #include "config.h"
 
-//#if defined(ARDUINO_ARCH_AVR)
-//#include <EEPROM.h>
-//#endif
-
-/*
-void saveFlash(short n, char *str) {
-    short len=strlen(str);
-    if (len>MAXFLASHSTR-1) len=MAXFLASHSTR-1;
-    for(int i=0;i<len;i++) EEPROM.write(n+i,str[i]);
-    EEPROM.write(n+len,0);
-
-   #if defined(ARDUINO_ARCH_ESP8266)
-  // write the data to EEPROM
-   short res  = EEPROM.commitReset();
-  Serial.println((res) ? "EEPROM Commit OK" : "Commit failed");
-  #endif
-}
-
-
-int loadFlash(short n, char *str, short l) {
-    short i;
-    uint8_t ch = EEPROM.read(n);
-    if (!ch || (ch == 0xff)) return 0;
-    for (i=0;i<l-1 && (str[i] = EEPROM.read(n++));i++);
-    str[i]=0;
-    return 1;
-}
-
-void saveFlash(short n, IPAddress& ip) {
-    for(int i=0;i<4;i++) EEPROM.write(n++,ip[i]);
-
-    #if defined(ARDUINO_ARCH_ESP8266)
-   // write the data to EEPROM
-    short res  = EEPROM.commitReset();
-   Serial.println((res) ? "EEPROM Commit OK" : "Commit failed");
-   #endif
-}
-
-int ipLoadFromFlash(short n, IPAddress &ip) {
-    for (int i = 0; i < 4; i++)
-        ip[i] = EEPROM.read(n++);
-    return (ip[0] && ((ip[0] != 0xff) || (ip[1] != 0xff) || (ip[2] != 0xff) || (ip[3] != 0xff)));
-}
-*/
 
 bool             systemConfig::isValidSysConf()
 {    
@@ -75,7 +31,7 @@ bool             systemConfig::isValidSysConf()
  {
    if (!stream || !isValidSysConf()) return false;    
    stream->seek(offsetof(systemConfigData,mac));
-   ///stream->write ((const uint8_t *)&_mac,sizeof(_mac));
+   stream->write ((const uint8_t *)&_mac,sizeof(_mac));
    memcpy(mac, _mac, sizeof(mac));
 
   return true;
@@ -85,16 +41,21 @@ bool             systemConfig::isValidSysConf()
  {
     if (!stream || !isValidSysConf()) return NULL; 
     stream->seek(offsetof(systemConfigData,MQTTpwd));   
-    if (stream->readBytesUntil(0,buffer,bufLen)) return buffer;
+     short bytes=stream->readBytesUntil(0,buffer,bufLen-1);
+    if (bytes) 
+            {
+            buffer[bytes]=0;  
+            return buffer;
+            }
     return NULL;
  }
  
  bool             systemConfig::setMQTTpwd(char * pwd)
  {
-    if (!stream || !isValidSysConf()) return false; 
+    if (!stream || !isValidSysConf() || (strlen(pwd)>=sizeof(systemConfigData::MQTTpwd))) return false; 
     stream->seek(offsetof(systemConfigData,MQTTpwd));   
     stream->print(pwd);   
-    return stream->write(0);
+    return stream->write((uint8_t)'\0');
  }
 
 
@@ -102,87 +63,112 @@ bool             systemConfig::isValidSysConf()
  {
     if (!stream || !isValidSysConf()) return NULL; 
     stream->seek(offsetof(systemConfigData,OTApwd));   
-    if (stream->readBytesUntil(0,buffer,bufLen)) return buffer;
+    short bytes=stream->readBytesUntil(0,buffer,bufLen-1);
+    if (bytes) 
+            {
+            buffer[bytes]=0;  
+            return buffer;
+            }
     return NULL;
  }
  
  bool             systemConfig::setOTApwd(char * pwd)
  {
-     if (!stream || !isValidSysConf()) return false; 
+     if (!stream || !isValidSysConf() || (strlen(pwd)>=sizeof(systemConfigData::OTApwd))) return false; 
     stream->seek(offsetof(systemConfigData,OTApwd));   
     stream->print(pwd);   
-    return stream->write(0);
+    return stream->write((uint8_t)'\0');
  }
  
 
-  char *             systemConfig::getServer(char * buffer, uint16_t bufLen)
+  char *          systemConfig::getServer(char * buffer, uint16_t bufLen)
  {
   if (!stream || !isValidSysConf()) return NULL; 
     stream->seek(offsetof(systemConfigData,configURL));   
-    if (stream->readBytesUntil(0,buffer,bufLen)) return buffer;
+    short bytes=stream->readBytesUntil(0,buffer,bufLen-1);
+    if (bytes) 
+            {
+            buffer[bytes]=0;  
+            return buffer;
+            }
     return NULL;
  }
  
  bool             systemConfig::setServer(char* url)
  {
-  if (!stream || !isValidSysConf()) return false; 
+  if (!stream || !isValidSysConf() || (strlen(url)>=sizeof(systemConfigData::configURL))) return false; 
-    stream->seek(offsetof(systemConfigData,OTApwd));   
+    stream->seek(offsetof(systemConfigData,configURL));   
     stream->print(url);   
-    return stream->write(0);
+    return stream->write((uint8_t)'\0');
-
  }
   
 
  bool             systemConfig::getIP(IPAddress& ip)
  {
+    uint32_t addr;
     if (!stream || !isValidSysConf()) return false; 
     stream->seek(offsetof(systemConfigData,ip));   
-    stream->readBytes((char *)&ip,sizeof(ip));
+    stream->readBytes((uint8_t *) &addr,4);
-    return ip;
+    ip=addr;
-
+    return (ip[0] && ((ip[0] != 0xff) || (ip[1] != 0xff) || (ip[2] != 0xff) || (ip[3] != 0xff)));
  }
  
  bool             systemConfig::getMask(IPAddress& mask)
  {
-  return 0;
+     uint32_t addr;
-
+    if (!stream || !isValidSysConf()) return false; 
+    stream->seek(offsetof(systemConfigData,mask));   
+    stream->readBytes((uint8_t *) &addr,4);
+    mask=addr;
+    return (mask[0] && ((mask[0] != 0xff) || (mask[1] != 0xff) || (mask[2] != 0xff) || (mask[3] != 0xff)));
  }
  
  bool             systemConfig::getDNS(IPAddress& dns)
- {
+ {   uint32_t addr;
-  return 0;
+    if (!stream || !isValidSysConf()) return false; 
-
+    stream->seek(offsetof(systemConfigData,dns));   
+    stream->readBytes((uint8_t *) &addr,4);
+    dns = addr;
+    return (dns[0] && ((dns[0] != 0xff) || (dns[1] != 0xff) || (dns[2] != 0xff) || (dns[3] != 0xff)));
  }
  
  bool             systemConfig::getGW(IPAddress& gw)
- {
+ {   uint32_t addr;
-      return 0;
+    if (!stream || !isValidSysConf()) return false; 
-  
+    stream->seek(offsetof(systemConfigData,gw));   
-         }
+    stream->readBytes((uint8_t *) &addr,4);
+    gw=addr;
+    return (gw[0] && ((gw[0] != 0xff) || (gw[1] != 0xff) || (gw[2] != 0xff) || (gw[3] != 0xff)));  
+}
  
 
  bool             systemConfig::setIP(IPAddress& ip)
- {
+ {  uint32_t addr=ip;
-  return 0;
+  if (!stream || !isValidSysConf()) return false; 
-
+    stream->seek(offsetof(systemConfigData,ip));   
+    return stream->write((uint8_t *) &addr, 4);   
  }
  
  bool             systemConfig::setMask(IPAddress& mask)
- {
+ {  uint32_t addr = mask;
-  return 0;
+  if (!stream || !isValidSysConf()) return false; 
-
+    stream->seek(offsetof(systemConfigData,mask));   
+    return stream->write((uint8_t *) &addr, 4);   
  }
  
  bool             systemConfig::setDNS(IPAddress& dns)
- {
+ {  uint32_t addr = dns;
-  return 0;
+  if (!stream || !isValidSysConf()) return false; 
+    stream->seek(offsetof(systemConfigData,dns));   
+    return stream->write((uint8_t *) &addr, 4);  
 
  }
  
  bool             systemConfig::setGW(IPAddress& gw)
- {
+ { uint32_t addr = gw;
-  return 0;
+  if (!stream || !isValidSysConf()) return false; 
-
+    stream->seek(offsetof(systemConfigData,gw));   
+    return stream->write((uint8_t *) &addr, 4);   
  }
  
 
@@ -191,7 +177,7 @@ bool             systemConfig::isValidSysConf()
    if (!stream) return ; 
     stream->seek(0);
      for (unsigned int i = 0; i < stream->getSize(); i++) {
-        stream->write(0);
+        stream->write((uint8_t)'\0');
     }
      stream->seek(offsetof(systemConfigData,signature));
      for (unsigned int i=0;i<sizeof(systemConfigData::signature);i++)
@@ -199,9 +185,49 @@ bool             systemConfig::isValidSysConf()
     stream->flush();
  }
  
+///
  bool             systemConfig::getSaveSuccedConfig()
  {
     return false;
  }
 
+  bool             systemConfig::setSaveSuccedConfig(bool)
+ {
+    return false;
+ }
+
+///
+ 
+bool             systemConfig::setSerialDebuglevel(short level)
+{
+return false;
+}
+
+bool             systemConfig::setUdpDebuglevel(short level)
+{
+return false;
+}
+
+
+uint8_t           systemConfig::getSerialDebuglevel()
+{
+return 7;
+}
+
+uint8_t           systemConfig::getUdpDebuglevel()
+{
+return 7;   
+}
+
+//
+bool             systemConfig::setLoadHTTPConfig(bool load)
+{
+return false;
+}
+
+bool             systemConfig::getLoadHTTPConfig()
+{
+return false;
+}
+
 

lighthub/config.h

@@ -28,22 +28,26 @@ const char EEPROM_signature[] = EEPROM_SIGNATURE;
  typedef struct
       { 
         char    signature[4];  
-        macAddress  mac;
+        macAddress  mac;  //6 bytes
+        union {
+                uint16_t configFlags;
+                struct
+                      { 
+                        uint8_t  serialDebugLevel:4; 
+                        uint8_t  syslogDebugLevel:4; 
+                        uint8_t  notGetConfigFromHTTP:1;
+                        uint8_t  saveToFlash:1;
+                      };
+              };  
         uint32_t ip;
         uint32_t dns;
         uint32_t gw;
         uint32_t mask;
-        union {
+
-                uint8_t configFlags;
-                struct
-                      { uint8_t  notGetConfigFromHTTP:1;
-                        uint8_t  saveToFlash:1;
-                      };
-              };  
         flashstr configURL;
         flashpwd MQTTpwd;
         flashpwd OTApwd;
-        uint8_t  serialDebugLevel; 
+
         uint16_t sysConfigHash;
         uint16_t JSONHash;
             
@@ -82,8 +86,15 @@ class systemConfig {
  bool             setDNS(IPAddress& dns);
  bool             setGW(IPAddress& gw);
 
+ bool             setSerialDebuglevel(short);
+ bool             setUdpDebuglevel(short);
+ uint8_t          getSerialDebuglevel();
+ uint8_t          getUdpDebuglevel();
+
  void             clear();
  bool             getSaveSuccedConfig();
+ bool             setSaveSuccedConfig(bool);
  bool             getLoadHTTPConfig();
+ bool             setLoadHTTPConfig(bool);
  //bool             Save();  
 };

lighthub/dmx.cpp

@@ -39,14 +39,14 @@ DMXESPSerial dmxout;
 uint8_t * DMXin = NULL;
 
 #ifdef DMX_SMOOTH
-uint8_t * DMXinterimBuf = NULL;
+volatile uint8_t * DMXinterimBuf = NULL;
-uint16_t DMXOUT_Channels=0;
+volatile uint16_t DMXOUT_Channels=0;
-uint32_t checkTimestamp=0L;
+volatile uint32_t checkTimestamp=0L;
 #endif
 
-int D_State=0;
+volatile uint32_t D_State=0;
 
-unsigned long D_checkT=0;
+volatile unsigned long D_checkT=0;
 
 #ifdef _artnet
 #include <Artnet.h>
@@ -123,6 +123,7 @@ void DMXSemiImmediateUpdate(short tch,short trh, int val)
 
 void DMXput(void)
 {
+if (!DMXin) return;  
 for (short tch=0; tch<=3 ; tch++)
     {
     short base = tch*4;
@@ -130,34 +131,44 @@ for (short tch=0; tch<=3 ; tch++)
     }
 };
 
+extern volatile uint8_t timerHandlerBusy;
+volatile int DMXinDoublecheck=0;
 
 void DMXUpdate(void)
 {
 #if defined(_dmxin)
 int t;
 if(!DMXin) return;
+
 #if defined(__SAM3X8E__)
 if (dmxin.getRxLength()<16) return;
 #endif
 for (short tch=0; tch<=3 ; tch++)
     {
     short base = tch*4;
-    bool updated = 0;
+    bool updated   = 0;
+    bool confirmed = 0;
 
     for (short trh=0; trh<4 ; trh++)
-    if ((t=dmxin.read(base+trh+1)) != DMXin[base+trh])
+    if (((t=dmxin.read(base+trh+1)) != DMXin[base+trh]))
       {
-        D_State |= (1<<tch);
         updated=1;
-        //Serial.print("onContactChanged :"); Serial.print(DMXin[tch*4+trh]); Serial.print(" => "); Serial.print(t);Serial.println();
+         if (DMXinDoublecheck>2)
-        DMXin[base+trh]=t;
+           {
-        //DMXImmediateUpdate(tch,trh,t);
+            D_State |= (1<<tch);
-        //break;
+            DMXin[base+trh]=t;
+            confirmed = 1;
+           }
       } 
 
-     if (updated)
+    if (updated) DMXinDoublecheck++; else DMXinDoublecheck=0;
+
+
+     if (confirmed)
         {
+
         DMXImmediateUpdate(tch,DMXin[base],DMXin[base+1],DMXin[base+2],DMXin[base+3]);
+        //for (int i=1; i<17; i++) {debugSerial.print(dmxin.read(i));debugSerial.print("-");};debugSerial.print("|");
         D_checkT=millisNZ();
         }
     }
@@ -191,11 +202,14 @@ D_checkT=0;
 
 // Here code for network update
 //int ch = 0;
+
 DMXput();
+
 #ifdef _dmxout
-for (int i=1; i<17; i++) {Serial.print(dmxin.read(i));Serial.print(";");}
+for (int i=1; i<17; i++) {debugSerial.print(dmxin.read(i));debugSerial.print(";");}
+debugSerial.println();
 #endif
-       Serial.println();
+
 #endif
 }
 
@@ -221,7 +235,7 @@ void DMXinSetup(int channels)
    DMXin = new uint8_t [channels];
 #if defined(ARDUINO_ARCH_AVR)
    DMXSerial.init(DMXReceiver,0,channels);
-    if (DMXSerial.getBuffer()) {Serial.print(F("Init in ch:"));Serial.println(channels);} else Serial.println(F("DMXin Buffer alloc err"));
+    if (DMXSerial.getBuffer()) {debugSerial.print(F("Init in ch:"));debugSerial.println(channels);} else debugSerial.println(F("DMXin Buffer alloc err"));
    //DMXSerial.maxChannel(channels);
    DMXSerial.attachOnUpdate(&DMXUpdate);
 #endif
@@ -271,36 +285,41 @@ debugSerial<<F("DMXInterim. Free:")<<freeRam()<<endl;
 #endif
 }
 
+volatile int8_t propagateBusy = 0;
 void DMXOUT_propagate()
 {
   #ifdef DMX_SMOOTH
+  if (propagateBusy) return;
+  propagateBusy++;
   uint32_t now = millis();
   //if (now<checkTimestamp) return;
-  if (!isTimeOver(checkTimestamp,now,DMX_SMOOTH_DELAY)) return;
+  if (isTimeOver(checkTimestamp,now,DMX_SMOOTH_DELAY)) 
-
-  for(int i=1;i<=DMXOUT_Channels;i++)
   {
-  uint8_t currLevel=dmxout.getTx(i);
+      for(int i=1;i<=DMXOUT_Channels;i++)
-  int32_t delta = currLevel-DMXinterimBuf[i-1];
+      {
-  if (delta)
+      uint8_t currLevel=dmxout.getTx(i);
-        {
+      int32_t delta = currLevel-DMXinterimBuf[i-1];
-        uint16_t step  = abs(delta) >> 4;
+      if (delta)
-        if (!step) step=1;
+            {
+            uint16_t step  = abs(delta) >> 4;
+            if (!step) step=1;
 
-        if (delta<0)
+            if (delta<0)
-                        {
+                            {
-                          DmxWrite2(i,currLevel+step);
+                              DmxWrite2(i,currLevel+step);
-                          //debugSerial<<"<";
+                              //debugSerial<<"<";
-                          }
+                              }
 
-        if (delta>0)
+            if (delta>0)
-                        {
+                            {
-                          DmxWrite2(i,currLevel-step);
+                              DmxWrite2(i,currLevel-step);
-                          //debugSerial<<">";
+                              //debugSerial<<">";
-                          }
+                              }
-        }
+            }
+      }
+      checkTimestamp=now;
   }
-  checkTimestamp=now;
+  propagateBusy--;
   #endif
 }
 

lighthub/error!.txt

@@ -1,369 +0,0 @@
-help
-
-Lazyhome.ru LightHub controller 473256d_2021-05-16 C++ version:201103L
-
-(+)WATCHDOG
-Config server:lazyhome.ru
-Firmware MAC Address CUSTOM_FIRMWARE_MAC
-(+)FreeRam printing
-(+)DS2482-100
-(+)Wiznet5x00
-(+)DMX
-(+)ADAFRUIT LED
-(+)MODBUS
-(+)OWIRE
-(+)DHT
-(+)COUNTER
-(-)HARDRESET, using soft
-(-)RESTART_LAN_ON_MQTT_ERRORS
-(+)CCS811 & HDC1080
-(+)AC HAIER
-(+)MOTOR CTR
-(+)SPI LED
-(+)OTA
-(+)ARTNET
-(+)MCP23017
-(+)PID
-(+)SYSLOG
-Reading 128 bits unique identifier
-ID: 51203120383830503130313232313035
-Current LAN config(ip,dns,gw,subnet):192.168.11.172, 192.168.11.1, 255.255.255.0, 
-Use these commands: 'help' - this text
-'mac de:ad:be:ef:fe:00' set and store MAC-address in EEPROM
-'ip [ip[,dns[,gw[,subnet]]]]' - set static IP
-'save' - save config in NVRAM
-'get' [config addr]' - get config from pre-configured URL and store addr
-'load' - load config from NVRAM
-'pwd' - define MQTT password
-'kill' - test watchdog
-'clear' - clear EEPROM
-'reboot' - reboot controller
->> 
-
-
-thermostat inactive  Set:33.00 Cur:0.00 cmd:2 Expired
-
-RAM=41128 thermostat inactive  Set:33.00 Cur:0.00 cmd:2 Expired
-
-RAM=41128 load
-Loading Config from EEPROM
-No stored config
-
->> 
-thermostat inactive  Set:33.00 Cur:0.00 cmd:2 Expired
-
-RAM=41128 get
- Default config server used: lazyhome.ru
-Config URI: http://lazyhome.ru/cnf/de-71-d1-a2-92-96.config.json
-HTTP Status code: 200
-GET Response: {
-"mqtt":["edem3","192.168.88.2"],
-"syslog":["192.168.88.2"],
-  "dmx":[3,80],
-  "topics":{"root":"edem"},
-"items":
-      {
-      "lightall":[7,[
-                      "lampbedr3",
-                      "lampcab31",
-                      "lampcab32",
-                      "lampsauna3",
-                      "lampbath33",
-                      "lampktc3",
-                      "lampwc3",
-                      "lamp4",
-                      "lampext4",
-                      "lamphall3",
-                      "lampstw3",
-                      "fasadeast",
-                      "bra31",
-                      "lampgst3",
-                      "lampkln3",
-                      "lampbalk3",
-                      "fasadsouth",
-                      "bra32"]],
-      "gr_hall3":[7,["lamphall3","lampstw3","lampwc3"]],
-      "gr_gost3":[7,["lampgst3","lampktc3"]],
-      "gr_kab3":[7,["lampcab31","lampcab32"]],
-      "relays":[7,["pout0","thermostat","pout2","pout3","pout4","pout5","pout6"]],
-                  "uouts":[7,["unprot0","unprot1","unprot2","unprot3","unprot4","unprot5","unprot6","unprot7"]],
-  
-                "mb1":[44,[1,0,3,100]],
-      "mb2":[44,[1,1,3,100]],
-      "mb3":[44,[1,2,3,100]],
-      "mb4":[44,[1,3,3,100]],
-      "mba":[44,[96,0,0]],
-      
-      "lampbedr3":[0,3],
-      "lampcab31":[0,9],
-      "lampcab32":[0,4],
-      
-      "lampsauna3":[0,11],
-      "lampbath3":[0,5],
-      "lampwc3":[0,2],
-      
-      "lampktc3":[0,7],
-      "lamp4":[0,8],
-      "lamphall3":[0,1],
-      
-      "lampext4":[0,10],
-      "lampstw3":[0,6],
-      "fasadeast":[0,12],
-      
-      "lampgst3":[0,13],
-      "bra31":[0,14],
-      "bra32":[0,15],
-
-      "lampbalk3":[0,16],
-      "fasadsouth":[0,17],
-      "lampkln3":[0,18],
-      "lampbar3":[0,21],
-      
-      "ledbedr3":[1,22],
-      "ledcab31":[1,26],
-      "ledcab32":[1,30],
-      "ledkab":[7,["ledcab31","ledcab32"]],
-      "ledsauna31":[1,34],
-      "ledsauna32":[1,38],
-      "ledsauna":[7,["ledsauna31","ledsauna32"]],
-      "led4":[1,42],
-      
-      "ledktc31":[1,48],
-      "ledktc31w":[0,52],
-      "ledktc32":[1,53],
-      "ledktc32w":[0,57],
-      "ledgst31":[1,58],
-      "ledgst31w":[0,62],
-      "ledgst32":[1,63],
-      "ledgst32w":[0,67],
-      "ledktc3w":[7,["ledktc31w","ledktc32w","ledgst31w","ledgst32w"]],
-      "ledktc3":[7,["ledktc31","ledktc32","ledgst31","ledgst32"]],      
-      
-      "fanbath3":[0,68],
-      "fanwc3":[0,69],
-      
-      "pout0":[6,22],
-      "thermostat":[5,23,33],
-      "pout2":[6,24],
-      "water3":[6,25],
-      "pout4":[3,9],
-      "pout5":[3,8],
-      "pout6":[3,11],
-      "pout7":[6,12],
-      
-      
-      "pwm0" :[3,4],
-      "pwm1" :[3,5],
-      "pwm2" :[3,6],
-      "pwm3" :[3,7],
-      "pwm10":[3,10],
-      
-  
-                "unprot0":[6,33],
-                "unprot1":[6,32],
-                "unprot2":[6,31],
-                "unprot3":[6,30],
-                "unprot4":[6,29],
-                "unprot5":[6,28],
-                "unprot6":[6,27],
-                "unprot7":[6,26]
-      },
-      
-"in":
-      [   {"#":42,"emit":"power3","item":"fanwc3"},
-          {"#":44,"emit":"in1"},
-          {"#":46,"emit":"in2"},
-                {"#":49,"emit":"in3"},
-                {"#":43,"emit":"in4"},
-          {"#":45,"emit":"in5"},
-          {"#":47,"emit":"in6"},
-          {"#":48,"emit":"in7"},
-                {"#":34,"emit":"in8"},
-          {"#":36,"emit":"in9"},
-          
-          {"#":38,"T":0,        
-                  "click":{"item":"gr_hall3","icmd":"80"},
-                  "dclick":{"item":"lampbedr3","icmd":"ON"}, 
-                  "tclick":{"item":"lightall","icmd":"REST"}, 
-                  "rpcmd":{"item":"gr_hall3","icmd":"%+2"}
-                },
-          {"#":40,"T":0, 
-                  "click":{"item":"gr_hall3","icmd":"OFF"},
-                  "dclick":{"item":"lampbedr3","icmd":"OFF"}, 
-                  "tclick":{"item":"lightall","icmd":"HALT"}, 
-                  "rpcmd":{"item":"gr_hall3","icmd":"%-2"}
-                },
-          {"#":35,"T":0,        
-                  "click":{"item":"gr_gost3","icmd":"ON"},
-                  "dclick":{"item":"gr_kab3","icmd":"ON"}, 
-                  "tclick":{"item":"lampbath3","icmd":"ON"}, 
-                  "rpcmd":{"item":"gr_gost3","icmd":"%+2"}
-                },
-          {"#":37,"T":0, 
-                  "click":{"item":"gr_gost3","icmd":"OFF"},
-                  "dclick":{"item":"gr_kab3","icmd":"OFF"}, 
-                  "tclick":{"item":"lampbath3","icmd":"OFF"}, 
-                  "rpcmd":{"item":"gr_gost3","icmd":"%-2"}
-                },                
-
-          {"#":39,"emit":"in14"},
-          {"#":41,"emit":"in15"},  
-    
-          {"#":54,"T":0,"act":
-                [
-                           {
-                            "map":[128,640],
-                            "click":{"item":"gr_gost3","icmd":"ON"},
-                            "dclick":{"item":"gr_kab3","icmd":"ON"}, 
-                            "tclick":{"item":"lampbath3","icmd":"ON"}, 
-                            "rpcmd":{"item":"gr_gost3","icmd":"%+2"}
-                           },
-                           {
-                            "map":[641,1024],
-                            "click":{"item":"gr_gost3","icmd":"OFF"},
-                            "dclick":{"item":"gr_kab3","icmd":"OFF"}, 
-                            "tclick":{"item":"lampbath3","icmd":"OFF"}, 
-                            "rpcmd":{"item":"gr_gost3","icmd":"%-2"}
-                           }
-                ]},         
-          {"#":55,"T":66,"emit":"a01","map":[0,1024,0,1024,10]},
-          
-          {"#":56,"T":66,"emit":"a02","map":[0,1024,0,1024,10]},
-          {"#":57,"T":66,"emit":"a03","map":[0,1024,0,1024,10]},
-          
-          {"#":58,"T":66,"emit":"a04","map":[0,1024,0,1024,10]},
-          {"#":59,"T":66,"emit":"a05","map":[0,1024,0,1024,10]},
-          
-          {"#":60,"T":0,"act":
-                [
-                           {
-                            "map":[128,640],
-                            "click":{"item":"gr_hall3","icmd":"50"},
-                            "dclick":{"item":"lampbedr3","icmd":"ON"}, 
-                            "tclick":{"item":"lightall","icmd":"REST"}, 
-                            "rpcmd":{"item":"gr_hall3","icmd":"%+2"}
-                           },
-                           {
-                            "map":[641,1024],
-                            "click":{"item":"gr_hall3","icmd":"OFF"},
-                            "dclick":{"item":"lampbedr3","icmd":"OFF"}, 
-                            "tclick":{"item":"lightall","icmd":"HALT"}, 
-                            "rpcmd":{"item":"gr_hall3","icmd":"%-2"}
-                                    }
-                ]}, 
-          {"#":61,"T":0,"act":
-                [
-                           {
-                            "map":[128,640],
-                            "click":{"item":"gr_gost3","icmd":"ON"},
-                            "dclick":{"item":"gr_kab3","icmd":"ON"}, 
-                            "tclick":{"item":"lampbath3","icmd":"ON"}, 
-                            "rpcmd":{"item":"gr_gost3","icmd":"%+2"}
-                           },
-                           {
-                            "map":[641,1024],
-                            "click":{"item":"gr_gost3","icmd":"OFF"},
-                            "dclick":{"item":"gr_kab3","icmd":"OFF"}, 
-                            "tclick":{"item":"lampbath3","icmd":"OFF"}, 
-                            "rpcmd":{"item":"gr_gost3","icmd":"%-2"}
-                          }
-                ]}, 
-          
-          {"#":62,"T":66,"emit":"a08","map":[0,1024,0,1024,10]},
-          {"#":63,"T":66,"emit":"a09","map":[0,1024,0,1024,10]},
-          
-          {"#":64,"T":66,"emit":"a10","map":[0,1024,0,1024,10]},
-          {"#":65,"T":66,"emit":"a11","map":[0,1024,0,1024,10]},
-          {"#":66,"T":0,"emit":"leak31","item":"water3","scmd":"OFF","rcmd":"ON"},
-          {"#":67,"T":2,"emit":"leak32","item":"water3","scmd":"OFF","rcmd":"ON"},
-          {"#":68,"T":0,"emit":"leak33","item":"water3","scmd":"OFF","rcmd":"ON"},
-          {"#":69,"T":0,"emit":"a15"}
-      ],      
-      
-"in2":
-      {   "42":{"emit":"power3","item":"fanwc3"},
-                "44":{"emit":"in1"},
-                "46":{"emit":"in2"},
-                "49":{"emit":"in3"},
-                "43":{"emit":"in4"},
-          "45":{"emit":"in5"},
-          "47":{"emit":"in6"},
-          "48":{"emit":"in7"},
-                "34":{"emit":"in8"},
-          "36":{"emit":"in9"},
-          
-          "38":{"T":0,        
-                  "click":{"item":"gr_hall3","icmd":"ON"},
-                  "dclick":{"item":"lampbedr3","icmd":"ON"}, 
-                  "tclick":{"item":"lightall","icmd":"REST"}, 
-                  "rpcmd":{"item":"gr_hall3","icmd":"%+2"}
-                },
-          "40":{"T":0, 
-                  "click":{"item":"gr_hall3","icmd":"OFF"},
-                  "dclick":{"item":"lampbedr3","icmd":"OFF"}, 
-                  "tclick":{"item":"lightall","icmd":"HALT"}, 
-                  "rpcmd":{"item":"gr_hall3","icmd":"%-2"}
-                },
-          "35":{"T":0,        
-                  "click":{"item":"gr_gost3","icmd":"ON"},
-                  "dclick":{"item":"lampwc3","icmd":"ON"}, 
-                  "tclick":{"item":"lampbath3","icmd":"ON"}, 
-                  "rpcmd":{"item":"gr_gost3","icmd":"%+2"}
-                },
-          "37":{"T":0, 
-                  "click":{"item":"gr_gost3","icmd":"OFF"},
-                  "dclick":{"item":"lampwc3","icmd":"OFF"}, 
-                  "tclick":{"item":"lampbath3","icmd":"OFF"}, 
-                  "rpcmd":{"item":"gr_gost3","icmd":"%-2"}
-                },                
-
-          "39":{"emit":"in14"},
-          "41":{"emit":"in15"},  
-    
-          "54":{"addr":54,"T":0,"act":
-                [
-                           {
-                            "map":[128,640],
-                            "click":{"item":"gr_gost3","icmd":"ON"},
-                            "dclick":{"item":"lampwc3","icmd":"ON"}, 
-                            "tclick":{"item":"lampbath3","icmd":"ON"}, 
-                            "rpcmd":{"item":"gr_gost3","icmd":"%+2"}
-                           },
-                           {
-                            "map":[641,1024],
-                            "click":{"item":"gr_gost3","icmd":"OFF"},
-                            "dclick":{"item":"lampwc3","icmd":"OFF"}, 
-                            "tclick":{"item":"lampbath3","icmd":"OFF"}, 
-                            "rpcmd":{"item":"gr_gost3","icmd":"%-2"}
-                           }
-                ]},         
-          "55":{"T":66,"emit":"a01","map":[0,1024,0,1024,10]},
-          
-          "56":{"T":66,"emit":"a02","map":[0,1024,0,1024,10]},
-          "57":{"T":66,"emit":"a03","map":[0,1024,0,1024,10]},
-          
-          "58":{"T":66,"emit":"a04","map":[0,1024,0,1024,10]},
-          "59":{"T":66,"emit":"a05","map":[0,1024,0,1024,10]},
-          
-          "60":{"T":66,"emit":"a06","map":[0,1024,0,1024,10]},
-          "61":{"T":66,"emit":"a07","map":[0,1024,0,1024,10]},
-          
-          "62":{"T":66,"emit":"a08","map":[0,1024,0,1024,10]},
-          "63":{"T":66,"emit":"a09","map":[0,1024,0,1024,10]},
-          
-          "64":{"T":66,"emit":"a10","map":[0,1024,0,1024,10]},
-          "65":{"T":66,"emit":"a11","map":[0,1024,0,1024,10]},
-          "66":{"T":0,"emit":"leak31","item":"water3","scmd":"OFF","rcmd":"ON"},
-          "67":{"T":2,"emit":"leak32","item":"water3","scmd":"OFF","rcmd":"ON"},
-          "68":{"T":0,"emit":"leak33","item":"water3","scmd":"OFF","rcmd":"ON"}
-      }
-}
-Free:29320
-Unlocking config ...
-
- Default config server used: lazyhome.ru
-Config URI: http://lazyhome.ru/cnf/de-71-d1-a2-92-96.config.json
-HTTP Status code>>>
-Lazyhome.ru LightHub controller 473256d_2021-05-16 C++ version:201103L
-
-(+)WATCHDOG

lighthub/esp.cpp

@@ -1,54 +0,0 @@
-#include "options.h"
-#ifdef __ESP__
-#include "esp.h"
-
-ESP8266WiFiMulti wifiMulti;
-WiFiClient ethClient;
-
-char mqtt_password[16];
-
-//default custom static IP
-//char static_ip[16] = "10.0.1.56";
-//char static_gw[16] = "10.0.1.1";
-//char static_sn[16] = "255.255.255.0"; 
-
-//flag for saving data
-bool shouldSaveConfig = false;
-
-//callback notifying us of the need to save config
-void saveConfigCallback () {
-  Serial.println(F("Should save config"));
-  shouldSaveConfig = true;
-}
-
-
-void espSetup () {
-  Serial.println(F("Setting up Wifi"));
-  shouldSaveConfig = true;
- //WiFiManager
-
-  WiFiManagerParameter custom_mqtt_password("", "mqtt password", mqtt_password, 16);
-  //Local intialization. Once its business is done, there is no need to keep it around
-  WiFiManager wifiManager;
-
-  wifiManager.setSaveConfigCallback(saveConfigCallback);
-
-  wifiManager.addParameter(&custom_mqtt_password);
-  wifiManager.setMinimumSignalQuality();
-     
-if (!wifiManager.autoConnect()) {
-    Serial.println(F("failed to connect and hit timeout"));
-    delay(3000);
-    //reset and try again, or maybe put it to deep sleep
-    ESP.reset();
-    delay(5000);
-  }
-
-  //if you get here you have connected to the WiFi
-  Serial.println(F("connected...yeey :)"));
-
-  //read updated parameters
-  strcpy(mqtt_password, custom_mqtt_password.getValue());
-
-}
-#endif

lighthub/esp.h

@@ -1,24 +0,0 @@
-#include <ESP8266WiFi.h> 
-//needed for library
-#include <DNSServer.h>
-#include <ESP8266WebServer.h>
-#include <WiFiManager.h>          //https://github.com/tzapu/WiFiManager
-#include <ESP8266WiFiMulti.h>
- 
-extern ESP8266WiFiMulti wifiMulti;
-extern WiFiClient ethClient;
-//WiFiManager wifiManager; 
-
-//define your default values here, if there are different values in config.json, they are overwritten.
-//length should be max size + 1 
-extern char mqtt_password[16];
-
-//default custom static IP
-//char static_ip[16] = "10.0.1.56";
-//char static_gw[16] = "10.0.1.1";
-//char static_sn[16] = "255.255.255.0"; 
-
-//flag for saving data
-extern bool shouldSaveConfig;
-
-void espSetup (); 

lighthub/flashstream.h

@@ -68,6 +68,7 @@ flashStream(String _filename):seekableStream(65535)
    virtual unsigned int seek(unsigned int _pos = 0){return fs.seek(_pos,SeekSet);};         
    virtual void flush() {return fs.flush();};
    virtual size_t write(uint8_t ch) {return fs.write(ch);};
+   using Print::write;
    void putEOF(){write (255);};
 virtual ~flashStream () {if (fs) fs.close();} ;
 };
@@ -95,7 +96,7 @@ flashStream(unsigned int _startPos=0, unsigned int _size=4096 ):seekableStream(_
 
     virtual unsigned int seek(unsigned int _pos = 0) 
         {   pos=min(startPos+_pos, startPos+streamSize);
-            debugSerial<<F("Seek:")<<pos<<endl;
+            //debugSerial<<F("Seek:")<<pos<<endl;
             return pos;
         };
     virtual int available() { return (pos<streamSize);};
@@ -117,19 +118,9 @@ flashStream(unsigned int _startPos=0, unsigned int _size=4096 ):seekableStream(_
         #endif
    };
           
-   #if defined(__SAM3X8E__)
-   virtual size_t write(const uint8_t *buffer, size_t size) override
-            {     
-                  debugSerial<<("Write from:")<<pos<<" "<<size<<" bytes"<<endl;    
-                  EEPROM.write(pos,(byte*)buffer,size);
-                  pos+=size;
-                return size;          
-            };
-   #endif            
    virtual size_t write(uint8_t ch) 
             {
                 #if defined(__AVR__)
-                //Serial.print (ch);
                   EEPROM.update(pos++,(char)ch);
                   return 1;
                 #endif   
@@ -139,6 +130,18 @@ flashStream(unsigned int _startPos=0, unsigned int _size=4096 ):seekableStream(_
                 #endif   
             return 0;                
             };
+    
+   #if defined(__SAM3X8E__)
+   virtual size_t write(const uint8_t *buffer, size_t size) override
+            {     
+                  //debugSerial<<("Write from:")<<pos<<" "<<size<<" bytes"<<endl;    
+                  EEPROM.write(pos,(byte*)buffer,size);
+                  pos+=size;
+                return size;          
+            };
+   #else 
+   using Print::write;//(const uint8_t *buffer, size_t size);         
+   #endif          
     void putEOF(){write (255);
     #if defined(ESP8266)
     EEPROM.commit();

lighthub/inputs.cpp

@@ -300,9 +300,9 @@ void Input::counterPoll() {
             short real_pin = mega_interrupt_array[interrupt_number];
             attachInterruptPinIrq(real_pin,interrupt_number);
         } else {
-            Serial.print(F("IRQ:"));
+            debugSerial.print(F("IRQ:"));
-            Serial.print(pin);
+            debugSerial.print(pin);
-            Serial.print(F(" Counter type. INCORRECT Interrupt number!!!"));
+            debugSerial.print(F(" Counter type. INCORRECT Interrupt number!!!"));
             return;
         }
 #endif
@@ -365,7 +365,7 @@ void Input::attachInterruptPinIrq(int realPin, int irq) {
                 attachInterrupt(real_irq, onCounterChanged5, RISING);
                 break;
         default:
-            Serial.print(F("Incorrect irq:"));Serial.println(irq);
+            debugSerial.print(F("Incorrect irq:"));debugSerial.println(irq);
             break;
         }
 }

lighthub/item.cpp

@@ -653,6 +653,7 @@ return false;
 //Main routine to control Item
 int Item::Ctrl(itemCmd cmd,  char* subItem, bool allowRecursion)
 {
+  uint32_t time=millis();  
   int suffixCode = cmd.getSuffix();
   bool operation = isNotRetainingStatus();
   
@@ -730,7 +731,7 @@ int Item::Ctrl(itemCmd cmd,  char* subItem, bool allowRecursion)
                                      toExecute=true;
                                      scale100=true;  //openHab topic format
                                      chActive=(isActive()>0);
-
+                                        debugSerial<<chActive<<" "<<cmd.getInt()<<endl;
                                      if (chActive>0 && !cmd.getInt()) {cmd.Cmd(CMD_OFF);status2Send |= SEND_COMMAND | SEND_IMMEDIATE;}
                                      if (chActive==0 && cmd.getInt()) {cmd.Cmd(CMD_ON);status2Send |= SEND_COMMAND | SEND_IMMEDIATE;}
             
@@ -1132,7 +1133,7 @@ switch (itemType) {
  if (command2Set) setCmd(command2Set | SEND_COMMAND);
  if (operation) SendStatus(status2Send);
 
-debugSerial<<F("Ctrl Res:")<<res<<endl; 
+debugSerial<<F("Ctrl Res:")<<res<<F(" time:")<<millis()-time<<endl; 
 return res; 
 }
 

lighthub/itemCmd.cpp

@@ -321,7 +321,9 @@ itemCmd itemCmd::assignFrom(itemCmd from, short chanType)
               setColorTemp(t);
               }
   cmd.suffixCode=from.cmd.suffixCode;
-  
+  cmd.cmdCode=from.cmd.cmdCode;
+  //cmd.cmdFlag
+  //cmd.cmdParam  
   
   switch (cmd.itemArgType){ //Destination
         case ST_HSV255:

lighthub/lighthub.ino

@@ -1,11 +1,9 @@
 #include "main.h"
-void setup(){
+void setup()
-  //if (millis()>1000)
+{
-            setup_main();
+      setup_main();
-  //else Serial.println("Hello");
-  //delay(1000);
 }
-void loop(){
+void loop()
-      //if (millis()>10000) 
+{    
       loop_main();
 }

lighthub/main.cpp

@@ -64,25 +64,6 @@ EthernetClient ethClient;
 MDNS mdns(mdnsUDP);
 #endif
 
-/*
-#if defined(__SAM3X8E__)
-DueFlashStorage EEPROM;
-#endif
-
-
-#ifdef ARDUINO_ARCH_ESP32
-NRFFlashStorage EEPROM;
-#endif
-
-#ifdef ARDUINO_ARCH_STM32
-NRFFlashStorage EEPROM;
-#endif
-
-#ifdef NRF5
-NRFFlashStorage EEPROM;
-#endif
-*/
-
 #ifdef SYSLOG_ENABLE
 #include <Syslog.h>
 
@@ -138,12 +119,12 @@ aJsonObject *dmxArr = NULL;
 bool syslogInitialized = false;
 #endif
 
-uint32_t timerPollingCheck = 0;
+volatile uint32_t timerPollingCheck = 0;
-uint32_t timerInputCheck = 0;
+volatile uint32_t timerInputCheck = 0;
-uint32_t timerLanCheckTime = 0;
+volatile uint32_t timerLanCheckTime = 0;
-uint32_t timerThermostatCheck = 0;
+volatile uint32_t timerThermostatCheck = 0;
-uint32_t timerSensorCheck =0;
+volatile uint32_t timerSensorCheck =0;
-uint32_t WiFiAwaitingTime =0;
+volatile uint32_t WiFiAwaitingTime =0;
 
 aJsonObject *pollingItem = NULL;
 
@@ -269,7 +250,7 @@ int httpHandler(Client& client, String request, long contentLength, bool authori
           if (!item.isValid() || !item.Ctrl((char*) body.c_str())) return 400;
 
         itemCmd ic;
-        ic.loadItem(&item,true);
+        ic.loadItem(&item,SEND_COMMAND|SEND_PARAMETERS);
         char buf[32];
         response=ic.toString(buf, sizeof(buf));             
        }
@@ -280,7 +261,7 @@ int httpHandler(Client& client, String request, long contentLength, bool authori
           if (!item.isValid()) return 400; 
 
          itemCmd ic;
-         ic.loadItem(&item,true);
+         ic.loadItem(&item,SEND_COMMAND|SEND_PARAMETERS);
          char buf[32];
          response=ic.toString(buf, sizeof(buf));
         
@@ -424,8 +405,15 @@ if (element && element->type == aJson_String) return element->valuestring;
 
 #ifdef OTA
     void setupOTA(void)
-    {
+    {       char passwordBuf[16];
-            ArduinoOTA.begin(Ethernet.localIP(), "Lighthub", "password", InternalStorage, sysConfStream, JSONStream);
+            if (!sysConf.getOTApwd(passwordBuf, sizeof(passwordBuf))) 
+                        {
+                        strcpy(passwordBuf,"password");
+                        errorSerial<<F("DEFAULT password for OTA API. Use otapwd command to set")<<endl;
+                        }
+
+            debugSerial<<passwordBuf<<endl;            
+            ArduinoOTA.begin(Ethernet.localIP(), "Lighthub", passwordBuf, InternalStorage, sysConfStream, JSONStream);
             ArduinoOTA.setCustomHandler(httpHandler);
             infoSerial<<F("OTA initialized\n");
 
@@ -838,12 +826,12 @@ void ip_ready_config_loaded_connecting_to_broker() {
             //strncpy_P(buf, inprefix, sizeof(buf));
             setTopic(buf,sizeof(buf),T_BCST);
             strncat(buf, "#", sizeof(buf));
-            Serial.println(buf);
+            debugSerial.println(buf);
             mqttClient.subscribe(buf);
 
             setTopic(buf,sizeof(buf),T_DEV);
             strncat(buf, "#", sizeof(buf));
-            Serial.println(buf);
+            debugSerialPort.println(buf);
             mqttClient.subscribe(buf);
 
             onMQTTConnect();
@@ -966,27 +954,24 @@ if (WiFi.status() == WL_CONNECTED) {
         infoSerial<<F("Got IP address:");
         printIPAddress(Ethernet.localIP());
         lanStatus = HAVE_IP_ADDRESS;
+    }
+  }//DHCP
 
-        #ifdef MDNS_ENABLE
+   #ifdef MDNS_ENABLE
         #ifndef OTA_PORT
         #define OTA_PORT  65280
         #endif
 
         mdns.begin(Ethernet.localIP(), "lighthub");
-        mdns.addServiceRecord(("LightHub controller._http"),
-                        OTA_PORT,
-                        MDNSServiceTCP);
-
-         mdns.addServiceRecord("Lighthub TXT"
-                         "._http",
-                         OTA_PORT,
-                         MDNSServiceTCP,
-                         "\x7path=/2");                
          
+         char txtRecord[32] = "\x7mac=";
+         SetBytes(sysConf.mac,6,txtRecord+5);
+         char mdnsName[32] = "LightHub";
+         SetBytes(sysConf.mac+4,2,mdnsName+8);
+         strncat(mdnsName,"._http",sizeof(mdnsName));
+         mdns.addServiceRecord(mdnsName, OTA_PORT, MDNSServiceTCP, txtRecord);                
         #endif
 
-    }
-  }
     #endif
 }
 
@@ -1070,10 +1055,12 @@ void cmdFunctionHelp(int arg_cnt, char **args)
     infoSerial<<F("\nUse these commands: 'help' - this text\n"
                           "'mac de:ad:be:ef:fe:00' set and store MAC-address in EEPROM\n"
                           "'ip [ip[,dns[,gw[,subnet]]]]' - set static IP\n"
-                          "'save' - save config in NVRAM\n"
+                          "'save' - save current config in NVRAM; ON|OFF - enable/disable autosave\n"
-                          "'get' [config addr]' - get config from pre-configured URL and store addr\n"
+                          "'get' [config addr]' - get config from pre-configured URL and store addr, ON|OFF - enable/disable download on startup\n"
                           "'load' - load config from NVRAM\n"
-                          "'pwd' - define MQTT password\n"
+                          "'pwd' - define and store MQTT password\n"
+                          "'otapwd' - define and store HTTP API password\n"
+                          "'log [serial_loglevel] [udp_loglevel]' - define log level (0..7)\n"
                           "'kill' - test watchdog\n"
                           "'clear' - clear EEPROM\n"
                           "'reboot' - reboot controller");
@@ -1081,9 +1068,12 @@ void cmdFunctionHelp(int arg_cnt, char **args)
 void printCurentLanConfig() {
     infoSerial << F("Current LAN config(ip,dns,gw,subnet):");
     printIPAddress(Ethernet.localIP());
-//    printIPAddress(Ethernet.dnsServerIP());
+    #if not defined(ESP8266) and not defined(ESP32)
+    printIPAddress(Ethernet.dnsServerIP());
+    #endif
     printIPAddress(Ethernet.gatewayIP());
     printIPAddress(Ethernet.subnetMask());
+
 }
 
 void cmdFunctionKill(int arg_cnt, char **args) {
@@ -1262,12 +1252,16 @@ int loadConfigFromEEPROM()
     return 0;
 }
 
-
-#if defined(__SAM3X8E__) 
-
-//#define saveBufLen 16000
 void cmdFunctionSave(int arg_cnt, char **args)
 { 
+if (arg_cnt>1)
+{
+    if (!strcasecmp_P(args[1],ON_P)) sysConf.setSaveSuccedConfig(true);
+    if (!strcasecmp_P(args[1],OFF_P)) sysConf.setSaveSuccedConfig(false);
+    infoSerial<<F("Config autosave:")<<sysConf.getSaveSuccedConfig()<<endl;
+    return;
+}
+#if defined(__SAM3X8E__) 
   char* outBuf = (char*) malloc(MAX_JSON_CONF_SIZE); /* XXX: Dynamic size. */
   if (outBuf == NULL)
     {
@@ -1278,32 +1272,36 @@ void cmdFunctionSave(int arg_cnt, char **args)
   aJson.print(root, &stringStream);
   int len = strlen(outBuf);
   outBuf[len++]= EOF;
-  
-  //EEPROM.write(EEPROM_offsetJSON,(byte*) outBuf,len);
   JSONStream.seek();
   size_t res = JSONStream.write((byte*) outBuf,len);
   free (outBuf);
   infoSerial<<res<< F("bytes from ")<<len<<F(" are saved to EEPROM")<<endl;
-}
-
 #else
-void cmdFunctionSave(int arg_cnt, char **args)
-{
-    //aJsonEEPROMStream jsonEEPROMStream = aJsonEEPROMStream(EEPROM_offsetJSON);
-    //flashStream fs = flashStream(EEPROM_offsetJSON);
     JSONStream.seek();
     aJsonStream jsonEEPROMStream = aJsonStream(&JSONStream);
-    
     infoSerial<<F("Saving config to EEPROM..");
-
     aJson.print(root, &jsonEEPROMStream);
     JSONStream.putEOF();
-
-
     infoSerial<<F("Saved to EEPROM")<<endl;
+#endif
 }
 
-#endif
+
+void cmdFunctionLoglevel(int arg_cnt, char **args)
+{
+if (arg_cnt>1)
+        {
+        serialDebugLevel=atoi(args[1]);
+        sysConf.setSerialDebuglevel(serialDebugLevel);
+        }
+
+if (arg_cnt>2)
+        {
+        udpDebugLevel=atoi(args[2]);
+        sysConf.setUdpDebuglevel(udpDebugLevel);
+        }
+infoSerial<<F("Serial debug level:")<<serialDebugLevel<<F("\nSyslog debug level:")<<udpDebugLevel<<endl;
+}
 
 void cmdFunctionIp(int arg_cnt, char **args)
 {
@@ -1367,7 +1365,7 @@ void cmdFunctionPwd(int arg_cnt, char **args)
     if (arg_cnt)
          sysConf.setMQTTpwd(args[1]);
     else sysConf.setMQTTpwd();
-    infoSerial<<F("Password updated\n");
+    infoSerial<<F("MQTT Password updated\n");
 }
 
 void cmdFunctionOTAPwd(int arg_cnt, char **args)
@@ -1375,7 +1373,7 @@ void cmdFunctionOTAPwd(int arg_cnt, char **args)
     if (arg_cnt)
          sysConf.setOTApwd(args[1]);
     else sysConf.setOTApwd();
-    infoSerial<<F("Password updated\n");
+    infoSerial<<F("OTA Password updated\n");
 }
 
 void cmdFunctionSetMac(int arg_cnt, char **args) {
@@ -1393,6 +1391,14 @@ void cmdFunctionSetMac(int arg_cnt, char **args) {
 }
 
 void cmdFunctionGet(int arg_cnt, char **args) {
+if (arg_cnt>1)
+{
+    if (!strcasecmp_P(args[1],ON_P)) sysConf.setLoadHTTPConfig(true);
+    if (!strcasecmp_P(args[1],OFF_P)) sysConf.setLoadHTTPConfig(false);
+    infoSerial<<F("Loading HTTP config on startup:")<<sysConf.getLoadHTTPConfig()<<endl;
+    return;
+}
+
     lanStatus= loadConfigFromHttp(arg_cnt, args);
     ethClient.stop(); //Refresh MQTT connect to get retained info
 }
@@ -1613,7 +1619,9 @@ void TimerHandler(void)
     interrupts();
     timerCount=micros();
      if (configLoaded && !timerHandlerBusy) inputLoop(CHECK_INTERRUPT);
+     #ifdef DMX_SMOOTH
      DMXOUT_propagate();
+     #endif
     timerCount=micros()-timerCount;
     timerHandlerBusy--;
 }
@@ -1633,6 +1641,19 @@ int16_t attachTimer(double microseconds, timerCallback callback, const char* Tim
 
 void setup_main() {
 
+  #if (SERIAL_BAUD)
+  debugSerialPort.begin(SERIAL_BAUD);
+  #else 
+
+  #if not defined (__SAM3X8E__)
+  debugSerialPort.begin();
+  #endif
+  delay(1000);
+  #endif
+
+  serialDebugLevel=sysConf.getSerialDebuglevel();
+  udpDebugLevel=sysConf.getUdpDebuglevel();
+
   #if defined(__SAM3X8E__)
   memset(&UniqueID,0,sizeof(UniqueID));
   #endif
@@ -1943,7 +1964,8 @@ if (!sysConf.getMAC()) {
 }
 
 void setupCmdArduino() {
-    cmdInit(uint32_t(SERIAL_BAUD));
+    //cmdInit(uint32_t(SERIAL_BAUD));
+    cmdInit();
     debugSerial<<(F(">>>"));
     cmdAdd("help", cmdFunctionHelp);
     cmdAdd("save", cmdFunctionSave);
@@ -1959,6 +1981,7 @@ void setupCmdArduino() {
     cmdAdd("otapwd", cmdFunctionOTAPwd);
     cmdAdd("clear",cmdFunctionClearEEPROM);
     cmdAdd("reboot",cmdFunctionReboot);
+    cmdAdd("log",cmdFunctionLoglevel);
 }
 
 void loop_main() { 
@@ -1983,7 +2006,11 @@ void loop_main() {
 
 #ifdef _artnet
         yield();
-        if (artnet) artnet->read();  ///hung
+        if (artnet) artnet->read();  ///hung if network not initialized
+#endif
+#ifdef MDNS_ENABLE
+        yield();
+        mdns.run();
 #endif
     }
 
@@ -2011,9 +2038,7 @@ void loop_main() {
     dmxout.update();
 #endif
 
-#ifdef MDNS_ENABLE
+
-        mdns.run();
-#endif
 }
 
 void owIdle(void) {
@@ -2044,27 +2069,32 @@ ethernetIdleCount--;
 };
 
 void modbusIdle(void) {
+    wdt_res();
     statusLED.poll();
     yield();
     cmdPoll();
-    wdt_res();
+    yield();
-    if (lanLoop() > HAVE_IP_ADDRESS) {
+    inputLoop(CHECK_INPUT);
+
+    if (lanLoop() > HAVE_IP_ADDRESS) 
+    { // Begin network runners
         yield();
         mqttClient.loop();
 #ifdef _artnet
         if (artnet) artnet->read();
 #endif
+#if defined(OTA)
         yield();
-        inputLoop(CHECK_INPUT);
+        ArduinoOTA.poll();
-    }
+#endif
 #ifdef MDNS_ENABLE
         mdns.run();
 #endif        
+    } //End network runners
 
 #ifdef _dmxin
     DMXCheck();
 #endif
-
 #if defined (_espdmx)
     dmxout.update();
 #endif

lighthub/main.h

@@ -261,6 +261,8 @@ void cmdFunctionSetMac(int arg_cnt, char **args);
 
 void cmdFunctionGet(int arg_cnt, char **args);
 
+void cmdFunctionLoglevel(int arg_cnt, char **args);
+
 void printBool(bool arg);
 /*
 void saveFlash(short n, char *str);

lighthub/modules/in_ccs811_hdc1080.cpp

@@ -28,7 +28,7 @@ int  in_ccs811::Setup()
   digitalWrite(WAK_PIN,LOW);
 #endif
 
-Serial.println("CCS811 Init");
+debugSerial.println("CCS811 Init");
 
 Wire.begin(); //Inialize I2C Harware
 Wire.setClock(4000);
@@ -41,7 +41,7 @@ Wire.setClock(4000);
   //if (returnCode != CCS811Core::CCS811_Stat_SUCCESS)
   {
     Serial.print("CCS811 Init error ");
-    //Serial.println(ccs811.statusString(returnCode));
+    //debugSerial.println(ccs811.statusString(returnCode));
     printDriverError(returnCode);
     return 0;
   }
@@ -61,16 +61,16 @@ return 1;
 int in_hdc1080::Setup()
 {
 if (HDC1080ready)  {debugSerial<<F("hdc1080 is already initialized")<<endl; return 0;}
-Serial.println("HDC1080 Init ");
+debugSerial.println("HDC1080 Init ");
 Wire.begin(); //Inialize I2C Harware
 // Default settings:
 // - Heater off
 // - 14 bit Temperature and Humidity Measurement Resolutions
 hdc1080.begin(0x40);
-Serial.print("Manufacturer ID=0x");
+debugSerial.print("Manufacturer ID=0x");
-Serial.println(hdc1080.readManufacturerId(), HEX); // 0x5449 ID of Texas Instruments
+debugSerial.println(hdc1080.readManufacturerId(), HEX); // 0x5449 ID of Texas Instruments
-Serial.print("Device ID=0x");
+debugSerial.print("Device ID=0x");
-Serial.println(hdc1080.readDeviceId(), HEX); // 0x1050 ID of the device
+debugSerial.println(hdc1080.readDeviceId(), HEX); // 0x1050 ID of the device
 printSerialNumber();
 HDC1080ready = true;
 return 1;
@@ -91,15 +91,15 @@ int in_hdc1080::Poll(short cause)
   int reg;
 if (cause!=POLLING_SLOW) return 0;
 if (!HDC1080ready) {debugSerial<<F("HDC1080 not initialized")<<endl; return 0;}
-Serial.print("HDC Status=");
+debugSerial.print("HDC Status=");
-Serial.println(reg=hdc1080.readRegister().rawData,HEX);
+debugSerial.println(reg=hdc1080.readRegister().rawData,HEX);
 if (reg!=0xff)
 {
-  Serial.print(" T=");
+  debugSerial.print(" T=");
-  Serial.print(t=hdc1080.readTemperature());
+  debugSerial.print(t=hdc1080.readTemperature());
-  Serial.print("C, RH=");
+  debugSerial.print("C, RH=");
-  Serial.print(h=hdc1080.readHumidity());
+  debugSerial.print(h=hdc1080.readHumidity());
-  Serial.println("%");
+  debugSerial.println("%");
 
 
   #ifdef M5STACK
@@ -125,7 +125,7 @@ if (reg!=0xff)
 }
 else //ESP I2C glitch
   {
-    Serial.println("I2C Reset");
+    debugSerial.println("I2C Reset");
     i2cReset();
   }
 return INTERVAL_SLOW_POLLING;
@@ -147,15 +147,15 @@ int in_ccs811::Poll(short cause)
     CCS811Core::status returnCode = ccs811.readAlgorithmResults();
     printDriverError(returnCode);
     float co2,tvoc;
-    Serial.print(" CO2[");
+    debugSerial.print(" CO2[");
     //Returns calculated CO2 reading
-    Serial.print(co2 = ccs811.getCO2());
+    debugSerial.print(co2 = ccs811.getCO2());
-    Serial.print("] tVOC[");
+    debugSerial.print("] tVOC[");
     //Returns calculated TVOC reading
 
-    Serial.print(tvoc = ccs811.getTVOC());
+    debugSerial.print(tvoc = ccs811.getTVOC());
-    Serial.print("] baseline[");
+    debugSerial.print("] baseline[");
-    Serial.print(ccs811Baseline = ccs811.getBaseline());
+    debugSerial.print(ccs811Baseline = ccs811.getBaseline());
 
     #ifdef M5STACK
       M5.Lcd.print(" CO2[");
@@ -181,7 +181,7 @@ int in_ccs811::Poll(short cause)
     publish(co2,"/CO2");
     publish(tvoc,"/TVOC");
     publish(ccs811Baseline,"/base");}
-    Serial.println("]");
+    debugSerial.println("]");
     printSensorError();
 
     #ifdef WAK_PIN
@@ -192,11 +192,11 @@ int in_ccs811::Poll(short cause)
 }
 
 void in_hdc1080::printSerialNumber() {
-Serial.print("Device Serial Number=");
+debugSerial.print("Device Serial Number=");
 HDC1080_SerialNumber sernum = hdc1080.readSerialNumber();
 char format[16];
 sprintf(format, "%02X-%04X-%04X", sernum.serialFirst, sernum.serialMid, sernum.serialLast);
-Serial.println(format);
+debugSerial.println(format);
 }
 
 //printDriverError decodes the CCS811Core::status type and prints the
@@ -209,22 +209,22 @@ void in_ccs811::printDriverError( CCS811Core::status errorCode )
   switch ( errorCode )
   {
     case CCS811Core::SENSOR_SUCCESS:
-      Serial.print("SUCCESS");
+      debugSerial.print("SUCCESS");
       break;
     case CCS811Core::SENSOR_ID_ERROR:
-      Serial.print("ID_ERROR");
+      debugSerial.print("ID_ERROR");
       break;
     case CCS811Core::SENSOR_I2C_ERROR:
-      Serial.print("I2C_ERROR");
+      debugSerial.print("I2C_ERROR");
       break;
     case CCS811Core::SENSOR_INTERNAL_ERROR:
-      Serial.print("INTERNAL_ERROR");
+      debugSerial.print("INTERNAL_ERROR");
       break;
     case CCS811Core::SENSOR_GENERIC_ERROR:
-      Serial.print("GENERIC_ERROR");
+      debugSerial.print("GENERIC_ERROR");
       break;
     default:
-      Serial.print("Unspecified error.");
+      debugSerial.print("Unspecified error.");
   }
 }
 
@@ -236,18 +236,18 @@ void in_ccs811::printSensorError()
 
   if ( error == 0xFF ) //comm error
   {
-    Serial.println("Failed to get ERROR_ID register.");
+    debugSerial.println("Failed to get ERROR_ID register.");
   }
   else
   {
-    //Serial.print("");
+    //debugSerial.print("");
-    if (error & 1 << 5) Serial.print("Error: HeaterSupply");
+    if (error & 1 << 5) debugSerial.print("Error: HeaterSupply");
-    if (error & 1 << 4) Serial.print("Error: HeaterFault");
+    if (error & 1 << 4) debugSerial.print("Error: HeaterFault");
-    if (error & 1 << 3) Serial.print("Error: MaxResistance");
+    if (error & 1 << 3) debugSerial.print("Error: MaxResistance");
-    if (error & 1 << 2) Serial.print("Error: MeasModeInvalid");
+    if (error & 1 << 2) debugSerial.print("Error: MeasModeInvalid");
-    if (error & 1 << 1) Serial.print("Error: ReadRegInvalid");
+    if (error & 1 << 1) debugSerial.print("Error: ReadRegInvalid");
-    if (error & 1 << 0) Serial.print("Error: MsgInvalid");
+    if (error & 1 << 0) debugSerial.print("Error: MsgInvalid");
-    Serial.println();
+    debugSerial.println();
   }
 }
 #endif

lighthub/modules/out_ac.cpp

@@ -82,8 +82,8 @@ void out_AC::InsertData(byte data[], size_t size){
   }
   */
 
-  Serial.print ("Power=");
+  debugSerial.print ("Power=");
-  Serial.println(power);
+  debugSerial.println(power);
 
   if (power & 0x08)
       publishTopic(item->itemArr->name, "ON", "/quiet");
@@ -189,7 +189,7 @@ void SendData(byte req[], size_t size){
   AC_Serial.write(req, size - 1);
   AC_Serial.write(getCRC(req, size-1));
   AC_Serial.flush();
-
+/*
  Serial.print("<<");
   for (int i=0; i < size-1; i++)
   {
@@ -203,6 +203,7 @@ void SendData(byte req[], size_t size){
              }
   }
 Serial.println();
+*/
 }
 
 inline unsigned char toHex( char ch ){
@@ -214,7 +215,7 @@ inline unsigned char toHex( char ch ){
 int  out_AC::Setup()
 {
 abstractOut::Setup();    
-Serial.println("AC Init");
+debugSerial.println("AC Init");
 AC_Serial.begin(9600);
 driverStatus = CST_INITIALIZED;
 return 1;
@@ -222,7 +223,7 @@ return 1;
 
 int  out_AC::Stop()
 {
-Serial.println("AC De-Init");
+debugSerial.println("AC De-Init");
 
 driverStatus = CST_UNKNOWN;
 return 1;
@@ -246,7 +247,7 @@ if (cause!=POLLING_SLOW) return 0;
   //if (now - prevPolling > INTERVAL_AC_POLLING) {
   if (isTimeOver(prevPolling,millis(),INTERVAL_AC_POLLING)) {
     prevPolling = millisNZ();
-    Serial.println ("Polling");
+    debugSerial.println ("Polling");
     SendData(qstn, sizeof(qstn)/sizeof(byte)); //Опрос кондиционера
   }
 delay(100);

lighthub/modules/out_modbus.cpp

@@ -187,7 +187,7 @@ else
 
 int  out_Modbus::Stop()
 {
-Serial.println("Modbus De-Init");
+debugSerial.println("Modbus De-Init");
 
 delete store;
 item->setPersistent(NULL);

lighthub/modules/out_motor.cpp

@@ -50,7 +50,7 @@ int  out_Motor::Setup()
 {
 abstractOut::Setup();    
 getConfig();
-Serial.println("Motor Init");
+debugSerial.println("Motor Init");
 pinMode(pinUp,OUTPUT);
 pinMode(pinDown,OUTPUT);
 
@@ -70,7 +70,7 @@ return 1;
 
 int  out_Motor::Stop()
 {
-Serial.println("Motor De-Init");
+debugSerial.println("Motor De-Init");
 digitalWrite(pinUp,INACTIVE);
 digitalWrite(pinDown,INACTIVE);
 
@@ -240,7 +240,7 @@ else
 
 }
 else //Target zone
-{ Serial.println("Target");
+{ debugSerial.println("Target");
   digitalWrite(pinUp,INACTIVE);
   digitalWrite(pinDown,INACTIVE);
   item->setExt(0);

lighthub/modules/out_pid.cpp

@@ -113,7 +113,7 @@ else
 
 int  out_pid::Stop()
 {
-Serial.println("PID De-Init");
+debugSerial.println("PID De-Init");
 if (store) delete (store->pid);
 delete store;
 item->setPersistent(NULL);

lighthub/modules/out_spiled.cpp

@@ -45,7 +45,7 @@ int  out_SPILed::Setup()
 {
 abstractOut::Setup();    
 getConfig();
-Serial.println("SPI-LED Init");
+debugSerial.println("SPI-LED Init");
 
 if (!leds)
 {
@@ -69,7 +69,7 @@ return 1;
 
 int  out_SPILed::Stop()
 {
-Serial.println("SPI-LED De-Init");
+debugSerial.println("SPI-LED De-Init");
 //FastLED.addLeds<TM1809, DATA_PIN, BRG>(leds, NUM_LEDS);
 #ifdef ADAFRUIT_LED
 leds->clear();

lighthub/modules/out_uartbridge.cpp

@@ -134,7 +134,7 @@ else
 
 int  out_UARTbridge::Stop()
 {
-Serial.println("UARTbridge De-Init");
+debugSerial.println("UARTbridge De-Init");
  
  udpClientA.stop();
  udpClientB.stop();

lighthub/streamlog.cpp

@@ -2,13 +2,21 @@
 #include <Arduino.h>
 #include "statusled.h"
 
+#ifdef SYSLOG_ENABLE
+ char logBuffer[LOGBUFFER_SIZE];
+ int  logBufferPos=0;
+#endif
+
+uint8_t serialDebugLevel = 7;
+uint8_t udpDebugLevel =7;
+
 #if defined (STATUSLED)
 extern StatusLED statusLED;
 #endif
 
 #ifdef SYSLOG_ENABLE
 extern bool syslogInitialized;
-Streamlog::Streamlog (HardwareSerial * _serialPort, int _severity , Syslog * _syslog, uint8_t _ledPattern )
+Streamlog::Streamlog (SerialPortType * _serialPort, uint8_t _severity , Syslog * _syslog, uint8_t _ledPattern )
 {
       serialPort=_serialPort;
       severity=_severity;
@@ -16,7 +24,7 @@ Streamlog::Streamlog (HardwareSerial * _serialPort, int _severity , Syslog * _sy
       ledPattern=_ledPattern;
 }
 #else
-Streamlog::Streamlog (HardwareSerial * _serialPort, int _severity,  uint8_t _ledPattern)
+Streamlog::Streamlog (SerialPortType * _serialPort, uint8_t _severity,  uint8_t _ledPattern)
 {
       serialPort=_serialPort;
       severity=_severity;
@@ -61,7 +69,7 @@ void Streamlog::flush(void)
 size_t Streamlog::write(uint8_t ch)
 {
 #ifdef SYSLOG_ENABLE
-if (syslogInitialized)
+if (syslogInitialized && (udpDebugLevel>=severity))
   {
   if (ch=='\n')
               {
@@ -80,7 +88,7 @@ if (syslogInitialized)
   if ((ch=='\n') && ledPattern) statusLED.flash(ledPattern);
   #endif
 
-  if (serialPort) return serialPort->write(ch);
+  if (serialPort && (serialDebugLevel>=severity)) return serialPort->write(ch);
 
   return 1;
 };

lighthub/streamlog.h

@@ -1,34 +1,41 @@
 #pragma once
 #include <Print.h>
+#include <Arduino.h>
 #include <HardwareSerial.h>
 #include <inttypes.h>
 
+#if defined (STM32)
+#include <USBSerial.h>
+#endif
+
 #ifndef LOGBUFFER_SIZE
 #define LOGBUFFER_SIZE 80
 #endif
 
 #ifdef SYSLOG_ENABLE
 #include <Syslog.h>
-static char logBuffer[LOGBUFFER_SIZE];
+#endif
-static int  logBufferPos=0;
+
+extern uint8_t serialDebugLevel;
+extern uint8_t udpDebugLevel;
+
+
+#ifndef SerialPortType
+#define SerialPortType HardwareSerial
 #endif
 
 #define LOG_DEBUG 7
-#define LOG_INFO 6
+#define LOG_INFO  6
 #define LOG_ERROR 3
 
-static uint8_t serialDebugLevel = 7;
-static uint8_t udpDebugLevel =7;
-
 class Streamlog : public Print
 {
   public:
     #ifdef SYSLOG_ENABLE
-    Streamlog (HardwareSerial * _serialPort, int _severity = LOG_DEBUG, Syslog * _syslog = NULL, uint8_t _ledPattern = 0);
+    Streamlog (SerialPortType * _serialPort, uint8_t _severity = LOG_DEBUG, Syslog * _syslog = NULL, uint8_t _ledPattern = 0);
     #else
-    Streamlog (HardwareSerial * _serialPort, int _severity = LOG_DEBUG, uint8_t _ledPattern = 0);
+    Streamlog (SerialPortType * _serialPort, uint8_t _severity = LOG_DEBUG, uint8_t _ledPattern = 0);
     #endif
-      //    {serialPort=_serialPort;severity=_severity; syslog=_syslog; }
     void begin(unsigned long speed);
     void end() ;
 
@@ -40,8 +47,8 @@ class Streamlog : public Print
     using Print::write; // pull in write(str) and write(buf, size) from Print
     operator bool() {return true;};
   private:
-    uint16_t severity;
+    uint8_t severity;
-    HardwareSerial *serialPort;
+    SerialPortType *serialPort;
     #ifdef SYSLOG_ENABLE
     Syslog * syslog;
     uint8_t ledPattern;

lighthub/utils.cpp

@@ -28,6 +28,10 @@ e-mail    anklimov@gmail.com
 #include <PubSubClient.h>
 #include <HardwareSerial.h>
 
+#ifndef debugSerialPort
+#define debugSerialPort Serial
+#endif
+
 extern int8_t configLocked;
 extern int8_t ethernetIdleCount;
 extern PubSubClient mqttClient;
@@ -63,7 +67,7 @@ void PrintBytes(uint8_t *addr, uint8_t count, bool newline) {
 const char HEXSTR[] = "0123456789ABCDEF";
 
 void SetBytes(uint8_t *addr, uint8_t count, char *out) {
-    // Serial.println("SB:");
+    // debugSerialPort.println("SB:");
     for (uint8_t i = 0; i < count; i++) {
         *(out++) = HEXSTR[(addr[i] >> 4)];
         *(out++) = HEXSTR[(addr[i] & 0x0f)];
@@ -101,7 +105,7 @@ int getInt(char **chan) {
     //Move pointer to next element (after ,)
     *chan = strchr(*chan, ',');
     if (*chan) *chan += 1;
-    //Serial.print(F("Par:")); Serial.println(ch);
+    //debugSerialPort.print(F("Par:")); debugSerialPort.println(ch);
     return ch;
    }
    return 0;
@@ -131,7 +135,7 @@ itemCmd getNumber(char **chan) {
     //Move pointer to next element (after ,)
     *chan = strchr(*chan, ',');
     if (*chan) *chan += 1;
-    //Serial.print(F("Par:")); Serial.println(ch);
+    //debugSerialPort.print(F("Par:")); debugSerialPort.println(ch);
     
     if (fract)
       val.Tens(ch*10+((ch>0)?fract:-fract));
@@ -248,7 +252,7 @@ int log(const char *str, ...)//TODO: __FlashStringHelper str support
         {
             //Clear buffer
             temp[j] = '\0';
-            Serial.print(temp);
+            debugSerialPort.print(temp);
             j=0;
             temp[0] = '\0';
 
@@ -282,7 +286,7 @@ int log(const char *str, ...)//TODO: __FlashStringHelper str support
         }
     };
 
-    Serial.println(); //Print trailing newline
+    debugSerialPort.println(); //Print trailing newline
     return count + 1; //Return number of arguments detected
 }
 
@@ -415,9 +419,9 @@ for(n = 0; n < 4; n++) {
 void printIPAddress(IPAddress ipAddress) {
     for (byte i = 0; i < 4; i++)
 #ifdef WITH_PRINTEX_LIB
-            (i < 3) ? debugSerial << (ipAddress[i]) << F(".") : debugSerial << (ipAddress[i])<<F(", ");
+            (i < 3) ? debugSerial << (ipAddress[i]) << F(".") : infoSerial << (ipAddress[i])<<F(", ");
 #else
-            (i < 3) ? debugSerial << _DEC(ipAddress[i]) << F(".") : debugSerial << _DEC(ipAddress[i]) << F(" ");
+            (i < 3) ? debugSerial << _DEC(ipAddress[i]) << F(".") : infoSerial << _DEC(ipAddress[i]) << F(" ");
 #endif
 }
 

platformio.ini

@@ -599,9 +599,9 @@ framework = arduino
 board = due
 monitor_baud = 115200
 build_flags = !python get_build_flags.py lighthub21
-upload_command = arduinoOTA -address 192.168.11.172 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE ;sleep 6
+;upload_command = arduinoOTA -address 192.168.11.172 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE ;sleep 6
 ;upload_command = arduinoOTA -address 192.168.88.45 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE;sleep 6
-upload_protocol = custom
+;upload_protocol = custom
 lib_ignore = 
        ;DS2482_OneWire   //UNCOMMENT for software 1-wire driver
 	DHT sensor library for ESPx
@@ -768,6 +768,7 @@ board_build.mcu = stm32f103rbt6
 board_build.f_cpu = 72000000L
 framework = arduino
 monitor_baud = 115200
+monitor_dtr = 1
 upload_protocol = dfu
 ;debug_tool = cmsis-dap
 build_flags = !python get_build_flags.py stm32

spare_files/owSwitch.cpp

@@ -22,6 +22,10 @@ GIT:      https://github.com/anklimov/lighthub
 #include <Arduino.h>
 #include "utils.h"
 
+#ifndef debugSerialPort
+#define debugSerialPort Serial
+#endif
+
 int owRead2408(uint8_t* addr) {
   uint8_t buf[13];
 //   PrintBytes(buf, 13, true);
@@ -38,7 +42,7 @@ if (!net) return -1;
   net->reset();
 
   if (!OneWire::check_crc16(buf, 11, &buf[11])) {
-    Serial.print(F("CRC failure in DS2408 at "));
+    debugSerialPort.print(F("CRC failure in DS2408 at "));
     PrintBytes(addr, 8, true);
     PrintBytes(buf+3,10);
     return -1;
@@ -51,8 +55,8 @@ if (!net) return -1;
 int read1W(int i)
 {
   
-  Serial.print("1W requested: ");
+  debugSerialPort.print("1W requested: ");
-  Serial.println (i);
+  debugSerialPort.println (i);
   
   int t=-1;  
   switch (term[i][0]){
@@ -80,10 +84,10 @@ int ow2408out(DeviceAddress addr,uint8_t cur)
   net->read_bytes(buf+3, 2);     
   //net.reset();
   PrintBytes(buf, 5);
-    Serial.print(F(" Out: "));Serial.print(buf[1],BIN);
+    debugSerialPort.print(F(" Out: "));debugSerialPort.print(buf[1],BIN);
-    Serial.print(F(" In: "));Serial.println(buf[4],BIN);
+    debugSerialPort.print(F(" In: "));debugSerialPort.println(buf[4],BIN);
   if (buf[3] != 0xAA) {
-      Serial.print(F("Write failure in DS2408 at "));
+      debugSerialPort.print(F("Write failure in DS2408 at "));
         PrintBytes(addr, 8, true);
         return -2;
      }  
@@ -97,7 +101,7 @@ if (!net) return -1;
  
  if ((devnum=owFind(addr))<0) return -1; 
  buf=regs[devnum];
-  Serial.print(F("Current: "));Serial.println(buf,BIN);
+  debugSerialPort.print(F("Current: "));debugSerialPort.println(buf,BIN);
   mask=0;
   int r,f;
   switch (subchan) {
@@ -107,7 +111,7 @@ if (!net) return -1;
            if (wstat[devnum] & (SW_PULSE0|SW_PULSE_P0)) 
               {
               wstat[devnum]|=SW_CHANGED_P0;
-              Serial.println(F("Rollback 0"));
+              debugSerialPort.println(F("Rollback 0"));
               } 
            else {
            wstat[devnum]|=SW_PULSE0;
@@ -122,7 +126,7 @@ if (!net) return -1;
            if (wstat[devnum] & (SW_PULSE1|SW_PULSE_P1)) 
               {
               wstat[devnum]|=SW_CHANGED_P1;
-              Serial.println(F("Rollback 1"));
+              debugSerialPort.println(F("Rollback 1"));
               } 
            else {
            wstat[devnum]|=SW_PULSE1;  
@@ -156,8 +160,8 @@ int cntrl2890(uint8_t* addr, int val) {
  uint8_t buf[13];
  if (!net) return -1; 
  // case 0x2C: //Dimmer
-     Serial.print(F("Update dimmer "));PrintBytes(addr, 8, true);Serial.print(F(" = "));
+     debugSerialPort.print(F("Update dimmer "));PrintBytes(addr, 8, true);debugSerialPort.print(F(" = "));
-     Serial.println(val);
+     debugSerialPort.println(val);
   
   net->reset();
   net->select(addr); 
@@ -270,7 +274,7 @@ int cntrl2413(uint8_t* addr, int subchan, int val) {
  uint8_t count =10;
  if (!net) return -1;  
  // case 0x85: //Switch
-     Serial.print(F("Update switch "));PrintBytes(addr, 8, false); Serial.print(F("/"));Serial.print(subchan);Serial.print(F(" = "));Serial.println(val);
+     debugSerialPort.print(F("Update switch "));PrintBytes(addr, 8, false); debugSerialPort.print(F("/"));debugSerialPort.print(subchan);debugSerialPort.print(F(" = "));debugSerialPort.println(val);
   while (count--)
   {
   net->reset();
@@ -281,13 +285,13 @@ int cntrl2413(uint8_t* addr, int subchan, int val) {
   net->write(cmd);
   
   results = net->read();  
-  Serial.print(F("Got: ")); Serial.println(results,BIN);
+  debugSerialPort.print(F("Got: ")); debugSerialPort.println(results,BIN);
-    //Serial.println((~results & 0x0F),BIN); Serial.println ((results >> 4),BIN);
+    //debugSerialPort.println((~results & 0x0F),BIN); debugSerialPort.println ((results >> 4),BIN);
   
   ok = (~results & 0x0F) == (results >> 4); // Compare nibbles            
   results &= 0x0F;                          // Clear inverted values      
 
-  if (ok) {Serial.println(F("Read ok"));break;} else {Serial.println(F("read Error"));delay(1);}
+  if (ok) {debugSerialPort.println(F("Read ok"));break;} else {debugSerialPort.println(F("read Error"));delay(1);}
   } //while
   
   if (ok && (val>=0))
@@ -309,7 +313,7 @@ int cntrl2413(uint8_t* addr, int subchan, int val) {
         if (!val) set|=DS2413_OUT_PinB; else set &= ~DS2413_OUT_PinB;
   };
    set |= 0xFC;
-   Serial.print(F("New: "));Serial.println(set,BIN);
+   debugSerialPort.print(F("New: "));debugSerialPort.println(set,BIN);
    cmd = DS2413_ACCESS_WRITE;   
    net->write(cmd);
   
@@ -321,17 +325,17 @@ int cntrl2413(uint8_t* addr, int subchan, int val) {
   if (ack == DS2413_ACK_SUCCESS)
   {
   results=net->read();  
-  Serial.print(F("Updated ok: ")); Serial.println(results,BIN);
+  debugSerialPort.print(F("Updated ok: ")); debugSerialPort.println(results,BIN);
   ok = (~results & 0x0F) == (results >> 4); // Compare nibbles     
   {
   if (ok) 
-        {Serial.println(F("Readback ok"));
+        {debugSerialPort.println(F("Readback ok"));
         break;} 
-    else {Serial.println(F("readback Error"));delay(1);}    
+    else {debugSerialPort.println(F("readback Error"));delay(1);}    
   }     
   results &= 0x0F;                          // Clear inverted values      
   } 
-  else Serial.println (F("Write failed"));;
+  else debugSerialPort.println (F("Write failed"));;
  
   } //while
   } //if 
@@ -347,12 +351,12 @@ int  sensors_ext(void)
   int t;  
    switch (term[si][0]){
   case 0x29: // DS2408
-    //Serial.println(wstat[si],BIN);
+    //debugSerialPort.println(wstat[si],BIN);
     
     if (wstat[si] & SW_PULSE0) {
       wstat[si]&=~SW_PULSE0;
       wstat[si]|=SW_PULSE_P0;
-      Serial.println(F("Pulse0 in progress"));
+      debugSerialPort.println(F("Pulse0 in progress"));
   
       return 500;
     }
@@ -361,7 +365,7 @@ int  sensors_ext(void)
       wstat[si]&=~SW_PULSE0_R;
       wstat[si]|=SW_PULSE_P0;
       regs[si] =(ow2408out(term[si],(regs[si] | SW_MASK) & ~SW_OUT0) & SW_INMASK) ^ SW_STAT0; 
-      Serial.println(F("Pulse0 in activated"));
+      debugSerialPort.println(F("Pulse0 in activated"));
   
       return 500;
     }
@@ -369,7 +373,7 @@ int  sensors_ext(void)
       if (wstat[si] & SW_PULSE1) {
       wstat[si]&=~SW_PULSE1;
       wstat[si]|=SW_PULSE_P1;
-      Serial.println(F("Pulse1 in progress"));
+      debugSerialPort.println(F("Pulse1 in progress"));
  
       return 500;
     }
@@ -378,14 +382,14 @@ int  sensors_ext(void)
       wstat[si]&=~SW_PULSE1_R;
       wstat[si]|=SW_PULSE_P1;
       regs[si] =(ow2408out(term[si],(regs[si] | SW_MASK) & ~SW_OUT1) & SW_INMASK) ^ SW_STAT1; 
-      Serial.println(F("Pulse0 in activated"));
+      debugSerialPort.println(F("Pulse0 in activated"));
   
       return 500;
     }
 
     if (wstat[si] & SW_PULSE_P0) {
       wstat[si]&=~SW_PULSE_P0;
-      Serial.println(F("Pulse0 clearing"));
+      debugSerialPort.println(F("Pulse0 clearing"));
       ow2408out(term[si],regs[si] | SW_MASK | SW_OUT0);
       
       if (wstat[si] & SW_CHANGED_P0) {
@@ -397,7 +401,7 @@ int  sensors_ext(void)
 
 if (wstat[si] & SW_PULSE_P1) {
       wstat[si]&=~SW_PULSE_P1;
-      Serial.println(F("Pulse1 clearing"));
+      debugSerialPort.println(F("Pulse1 clearing"));
       ow2408out(term[si],regs[si] | SW_MASK | SW_OUT1);
       
       if (wstat[si] & SW_CHANGED_P1) {
@@ -415,18 +419,18 @@ if (wstat[si] & SW_PULSE_P1) {
     
     if (t!=regs[si]) {
                
-        Serial.print(F("DS2408 data = "));
+        debugSerialPort.print(F("DS2408 data = "));
-        Serial.println(t, BIN);
+        debugSerialPort.println(t, BIN);
         
         if (!(wstat[si] & SW_DOUBLECHECK))
           {
           wstat[si]|=SW_DOUBLECHECK; //suspected
-          Serial.println(F("DOUBLECHECK"));
+          debugSerialPort.println(F("DOUBLECHECK"));
           return recheck_interval;
           }
         
             
-            Serial.println(F("Really Changed"));    
+            debugSerialPort.println(F("Really Changed"));    
             if (owChanged) owChanged(si,term[si],t);    
             regs[si]=t;
     
@@ -441,7 +445,7 @@ if (wstat[si] & SW_PULSE_P1) {
   case 0x81:
   t=wstat[si];
   if (t!=regs[si]) 
-    { Serial.println(F("Changed")); 
+    { debugSerialPort.println(F("Changed")); 
      if (owChanged) owChanged(si,term[si],t);    
      regs[si]=t;
     }