-default topics prefix used if no "/" in "emit" parameters of output

-Thermostat should be working with DHT22
-Negative PIN# in thermostat item - reverse logic: HIGH level of output
should stop heating

lighthub/inputs.cpp

@@ -162,8 +162,9 @@ void Input::counterPoll() {
     aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
     if (emit) {
         char valstr[10];
-        char addrstr[100] = "";
+        char addrstr[MQTT_TOPIC_LENGTH];
-        strcat(addrstr, emit->valuestring);
+        strncpy(addrstr,emit->valuestring,sizeof(addrstr));
+        if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
         sprintf(valstr, "%d", counterValue);
         mqttClient.publish(addrstr, valstr);
         setNextPollTime(millis() + DHT_POLL_DELAY_DEFAULT);
@@ -225,9 +226,11 @@ void Input::dht22Poll() {
     float humidity = dht.readHumidity();
 #endif
     aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
+    aJsonObject *item = aJson.getObjectItem(inputObj, "item");
+    if (item) thermoSetCurTemp(item, temp);
     debugSerial << F("IN:") << pin << F(" DHT22 type. T=") << temp << F("°C H=") << humidity << F("%");
     if (emit && temp && humidity && temp == temp && humidity == humidity) {
-        char addrstr[100] = "";
+        char addrstr[MQTT_TOPIC_LENGTH] = "";
 #ifdef WITH_DOMOTICZ
         if(getIdxField()){
             publishDataToDomoticz(DHT_POLL_DELAY_DEFAULT, emit, "{\"idx\":%s,\"svalue\":\"%.1f;%.0f;0\"}", getIdxField(), temp, humidity);
@@ -235,7 +238,9 @@ void Input::dht22Poll() {
         }
 #endif
         char valstr[10];
-        strcat(addrstr, emit->valuestring);
+
+        strncpy(addrstr, emit->valuestring, sizeof(addrstr));
+        if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
         strcat(addrstr, "T");
         printFloatValueToStr(temp, valstr);
         mqttClient.publish(addrstr, valstr);
@@ -444,13 +449,16 @@ void Input::onContactChanged(int newValue) {
             : publishDataToDomoticz(0,emit,"{\"command\":\"switchlight\",\"idx\":%s,\"switchcmd\":\"Off\"}",getIdxField());
         } else
 #endif
+char addrstr[MQTT_TOPIC_LENGTH];
+strncpy(addrstr,emit->valuestring,sizeof(addrstr));
+if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
         if (newValue) {  //send set command
-            if (!scmd) mqttClient.publish(emit->valuestring, "ON", true);
+            if (!scmd) mqttClient.publish(addrstr, "ON", true);
             else if (strlen(scmd->valuestring))
-                mqttClient.publish(emit->valuestring, scmd->valuestring, true);
+                mqttClient.publish(addrstr, scmd->valuestring, true);
         } else {  //send reset command
-            if (!rcmd) mqttClient.publish(emit->valuestring, "OFF", true);
+            if (!rcmd) mqttClient.publish(addrstr, "OFF", true);
-            else if (strlen(rcmd->valuestring))mqttClient.publish(emit->valuestring, rcmd->valuestring, true);
+            else if (strlen(rcmd->valuestring))mqttClient.publish(addrstr, rcmd->valuestring, true);
         }
     }
 
@@ -485,9 +493,12 @@ void Input::onAnalogChanged(int newValue) {
 //            : publishDataToDomoticz(0,emit,"{\"command\":\"switchlight\",\"idx\":%s,\"switchcmd\":\"Off\"}",getIdxField());
 //        } else
 //#endif
-               char strVal[16];
+              char addrstr[MQTT_TOPIC_LENGTH];
-               itoa(newValue,strVal,10);
+              strncpy(addrstr,emit->valuestring,sizeof(addrstr));
-               mqttClient.publish(emit->valuestring, strVal, true);
+              if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
+              char strVal[16];
+              itoa(newValue,strVal,10);
+              mqttClient.publish(addrstr, strVal, true);
 }
 
     if (item) {

lighthub/item.cpp

@@ -287,7 +287,7 @@ if (isSet)
               Par[0] = map(hsv.h, 0, 255, 0, 365);
               Par[1] = map(hsv.s, 0, 255, 0, 100);
               Par[2] = map(hsv.v, 0, 255, 0, 100);
-          return    Ctrl(0, 3, Par, send, subItem);
+          return    Ctrl(0, 3, Par, send, subItemN);
           }
           break;
       }
@@ -296,21 +296,21 @@ if (isSet)
 
           //       if (item.getEnableCMD(500) || lanStatus == 4)
           return Ctrl(cmd, 0, NULL,
-                    send, subItem); //Accept ON command not earlier then 500 ms after set settings (Homekit hack)
+                    send, subItemN); //Accept ON command not earlier then 500 ms after set settings (Homekit hack)
           //       else debugSerial<<F("on Skipped"));
 
           break;
       default: //some known command
-          return Ctrl(cmd, 0, NULL, send, subItem);
+          return Ctrl(cmd, 0, NULL, send, subItemN);
 
   } //ctrl
 }
 }
 
 
-int Item::Ctrl(short cmd, short n, int *Parameters, boolean send, char * subItem) {
+int Item::Ctrl(short cmd, short n, int *Parameters, boolean send, int subItemN) {
 
-    debugSerial<<F(" MEM=")<<freeRam()<<F(" Item=")<<itemArr->name<<F(" Sub=")<<subItem<<F(" Cmd=")<<cmd<<F(" Par= ");
+    debugSerial<<F(" MEM=")<<freeRam()<<F(" Item=")<<itemArr->name<<F(" Sub=")<<subItemN<<F(" Cmd=")<<cmd<<F(" Par= ");
     if (!itemArr) return -1;
     int Par[MAXCTRLPAR] = {0, 0, 0};
     if (Parameters)
@@ -630,7 +630,7 @@ int Item::Ctrl(short cmd, short n, int *Parameters, boolean send, char * subItem
                 while (i) {
                     Item it(i->valuestring);
 //            it.copyPar(itemVal);
-                    it.Ctrl(cmd, n, Par, send); //// was true
+                    it.Ctrl(cmd, n, Par, send,subItemN); //// was true
                     i = i->next;
                 } //while
             } //if

lighthub/item.h

@@ -116,7 +116,7 @@ class Item
   Item(char * name);
   Item(aJsonObject * obj);
   boolean isValid ();
-  virtual int Ctrl(short cmd, short n=0, int * Parameters=NULL, boolean send=true, char * subItem=NULL);
+  virtual int Ctrl(short cmd, short n=0, int * Parameters=NULL, boolean send=true, int subItem=0);
   virtual int Ctrl(char * payload, boolean send=true, char * subItem=NULL);
 
   int getArg(short n=0);

lighthub/main.cpp

@@ -1622,15 +1622,15 @@ void thermoLoop(void) {
                             << F(" cmd:") << thermoStateCommand;
                 pinMode(thermoPin, OUTPUT);
                 if (thermoDisabledOrDisconnected(thermoExtensionArray, thermoStateCommand)) {
-                    digitalWrite(thermoPin, LOW);
+                    if (thermoPin<0) digitalWrite(-thermoPin, HIGH); digitalWrite(thermoPin, LOW);
                     debugSerial<<F(" OFF");
                 } else {
                     if (curTemp < thermoSetting - THERMO_GIST_CELSIUS) {
-                        digitalWrite(thermoPin, HIGH);
+                        if (thermoPin<0) digitalWrite(-thermoPin, LOW); digitalWrite(thermoPin, HIGH);
                         debugSerial<<F(" ON");
                     } //too cold
                     else if (curTemp >= thermoSetting) {
-                        digitalWrite(thermoPin, LOW);
+                        if (thermoPin<0) digitalWrite(-thermoPin, HIGH); digitalWrite(thermoPin, LOW);
                         debugSerial<<F(" OFF");
                     } //Reached settings
                     else debugSerial<<F(" -target zone-"); // Nothing to do
@@ -1650,8 +1650,10 @@ publishStat();
 }
 
 short thermoSetCurTemp(char *name, float t) {
+  if (!name || !strlen(name)) return 0;
     if (items) {
         aJsonObject *thermoItem = aJson.getObjectItem(items, name);
+        if (!thermoItem) return 0;
         if (isThermostatWithMinArraySize(thermoItem, 4)) {
             aJsonObject *extArray = NULL;
 
@@ -1672,5 +1674,5 @@ short thermoSetCurTemp(char *name, float t) {
                 att->valueint = (int) T_ATTEMPTS;
             }
         }
-    }
+    return 1;}
-}
+return 0;}

lighthub/options.h

@@ -98,7 +98,7 @@
 #endif
 
 #define MQTT_SUBJECT_LENGTH 20
-#define MQTT_TOPIC_LENGTH 20
+#define MQTT_TOPIC_LENGTH 64
 
 #ifndef DMX_DISABLE
 #define _dmxin