ESP8266 and Wiznet 5500 raw support

2025-12-06 11:49:51 +03:00 · 2018-03-10 02:07:05 +03:00
parent 45cbd8b4a0
commit 7fb2cf4fcc
8 changed files with 483 additions and 254 deletions
--- a/README.md
+++ b/README.md
@@ -1,5 +1,5 @@
 # LightHub 
-is Flexible, Arduino-Mega based SmartHome controller
+is Flexible, Arduino-Mega/Arduino DUE/ESP8266  based SmartHome controller

 It allow to connect together:

@@ -16,7 +16,7 @@ Scalability is virtually unlimited: Setup so many controllers you needed in most

 Prease refer our Wiki for insructions.

-Just started preparation to porting firmware to AVR based Arduino DUE and ESP8266/ESP32
+Finished portation of proejct to  Arduino DUE and ESP8266 (ESP32 not tested)

 Compiled image has been added to compiled/ folder
 use 
@@ -39,7 +39,7 @@ For patched libraries, appropriate GitHub repo URL provided:
 * DS2482_OneWire                        https://github.com/anklimov/DS2482_OneWire
 * FastLED
 * Wire (standard)
-* Artnet
+* Artnet				https://github.com/anklimov/Artnet.git
 * DmxSimple                             https://github.com/anklimov/DmxSimple (for AVR) or https://github.com/anklimov/ESP-Dmx (for ESP) or https://github.com/anklimov/DmxDue (for DUE)
 * HTTPClient (for AVR)                  https://github.com/anklimov/HTTPClient or https://github.com/arduino-libraries/ArduinoHttpClient for other platforms
 * aJson                                 https://github.com/anklimov/aJson
@@ -51,8 +51,7 @@ For patched libraries, appropriate GitHub repo URL provided:
 * Ethernet                              https://github.com/anklimov/Ethernet
 * SPI (standard)

-Portation from AVR Mega 2560 to SAM3X8E (Arduino DUE) is done since v 0.96
-Next step ESP portation
+Portation from AVR Mega 2560 to SAM3X8E (Arduino DUE) done since v 0.96

 #Platforms specific details:

@@ -64,5 +63,14 @@ SAM3X8E:
 *both, DMX-in and DMX-out are hardware USART based. Use USART1 (pins 18 and 19) for DMX-out and DMX-in

 ESP:
-*Wifi instead Ether not implemented yet
-*DMX-IN not possible to deploy
+*DMX-OUT on USART1 TX
+*DMX-IN - not possible to deploy in ESP8266
+*Modbus - disabled. Might be configured in future on USART0 instead CLI/DEBUG
+
+since v. 0.97:
+
+There is first attempt to use Wiznet 5500  (still not stable enough)
+Need to use compiler directive -D Wiz5500 and https://github.com/anklimov/Ethernet2 library
+
+First attempt to use platformio toolchain for compiling (work not completed yet)
+
--- a/lib/readme.txt
+++ b/lib/readme.txt
@@ -0,0 +1,36 @@
+
+This directory is intended for the project specific (private) libraries.
+PlatformIO will compile them to static libraries and link to executable file.
+
+The source code of each library should be placed in separate directory, like
+"lib/private_lib/[here are source files]".
+
+For example, see how can be organized `Foo` and `Bar` libraries:
+
+|--lib
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |- readme.txt --> THIS FILE
+|- platformio.ini
+|--src
+   |- main.c
+
+Then in `src/main.c` you should use:
+
+#include <Foo.h>
+#include <Bar.h>
+
+// rest H/C/CPP code
+
+PlatformIO will find your libraries automatically, configure preprocessor's
+include paths and build them.
+
+More information about PlatformIO Library Dependency Finder
+- http://docs.platformio.org/page/librarymanager/ldf.html
--- a/lighthub/dmx.cpp
+++ b/lighthub/dmx.cpp
@@ -180,7 +180,7 @@ for (int i=1; i<17; i++) {Serial.print(dmxin.read(i));Serial.print(";");}
 }


-void onDmxFrame(uint16_t universe, uint16_t length, uint8_t sequence, uint8_t* data)
+void onDmxFrame(uint16_t universe, uint16_t length, uint8_t sequence, uint8_t* data, IPAddress remoteIP)
 {
 #ifdef _dmxout
  for (int i = 0 ; i < length && i<MAX_CHANNELS ; i++)
--- a/lighthub/esp.cpp
+++ b/lighthub/esp.cpp
@@ -0,0 +1,54 @@
+#include "options.h"
+#ifdef __ESP__
+#include "esp.h"
+
+ESP8266WiFiMulti wifiMulti;
+WiFiClient ethClient;
+
+char mqtt_password[16];
+
+//default custom static IP
+//char static_ip[16] = "10.0.1.56";
+//char static_gw[16] = "10.0.1.1";
+//char static_sn[16] = "255.255.255.0"; 
+
+//flag for saving data
+bool shouldSaveConfig = false;
+
+//callback notifying us of the need to save config
+void saveConfigCallback () {
+  Serial.println("Should save config");
+  shouldSaveConfig = true;
+}
+
+
+void espSetup () {
+  Serial.println("Setting up Wifi");
+  shouldSaveConfig = true;
+ //WiFiManager
+
+  WiFiManagerParameter custom_mqtt_password("", "mqtt password", mqtt_password, 16);
+  //Local intialization. Once its business is done, there is no need to keep it around
+  WiFiManager wifiManager;
+
+  wifiManager.setSaveConfigCallback(saveConfigCallback);
+
+  wifiManager.addParameter(&custom_mqtt_password);
+  wifiManager.setMinimumSignalQuality();
+     
+if (!wifiManager.autoConnect()) {
+    Serial.println("failed to connect and hit timeout");
+    delay(3000);
+    //reset and try again, or maybe put it to deep sleep
+    ESP.reset();
+    delay(5000);
+  }
+
+  //if you get here you have connected to the WiFi
+  Serial.println("connected...yeey :)");
+
+  //read updated parameters
+  strcpy(mqtt_password, custom_mqtt_password.getValue());
+
+}
+#endif
--- a/lighthub/esp.h
+++ b/lighthub/esp.h
@@ -0,0 +1,24 @@
+#include <ESP8266WiFi.h> 
+//needed for library
+#include <DNSServer.h>
+#include <ESP8266WebServer.h>
+#include <WiFiManager.h>          //https://github.com/tzapu/WiFiManager
+#include <ESP8266WiFiMulti.h>
+ 
+extern ESP8266WiFiMulti wifiMulti;
+extern WiFiClient ethClient;
+//WiFiManager wifiManager; 
+
+//define your default values here, if there are different values in config.json, they are overwritten.
+//length should be max size + 1 
+extern char mqtt_password[16];
+
+//default custom static IP
+//char static_ip[16] = "10.0.1.56";
+//char static_gw[16] = "10.0.1.1";
+//char static_sn[16] = "255.255.255.0"; 
+
+//flag for saving data
+extern bool shouldSaveConfig;
+
+void espSetup (); 
--- a/lighthub/lighthub.ino
+++ b/lighthub/lighthub.ino
--- a/platformio.ini
+++ b/platformio.ini
@@ -14,17 +14,18 @@ src_dir = lighthub
 platform = atmelavr
 board = megaatmega2560
 framework = arduino
+build_flags =
+    -D Wiz5500
 lib_deps =
-  https://github.com/livello/Arduino-Temperature-Control-Library.git
-  https://github.com/anklimov/DS2482_OneWire
-  https://github.com/anklimov/DmxSimple
-  https://github.com/anklimov/HTTPClient
-  https://github.com/anklimov/aJson
-  https://github.com/anklimov/CmdArduino
-  https://github.com/anklimov/ModbusMaster
-  https://github.com/anklimov/DMXSerial
-  https://github.com/anklimov/Ethernet
-  126
-  https://github.com/PaulStoffregen/SPI.git
-  https://github.com/knolleary/pubsubclient.git
-  https://github.com/natcl/Artnet.git
+          https://github.com/anklimov/Arduino-Temperature-Control-Library.git
+          https://github.com/anklimov/DS2482_OneWire
+          https://github.com/anklimov/DmxSimple
+          https://github.com/anklimov/HTTPClient
+          https://github.com/anklimov/aJson
+          https://github.com/anklimov/CmdArduino
+          https://github.com/anklimov/ModbusMaster
+          https://github.com/anklimov/DMXSerial
+          https://github.com/anklimov/Ethernet2
+          https://github.com/PaulStoffregen/SPI.git
+          https://github.com/knolleary/pubsubclient.git
+          https://github.com/anklimov/Artnet.git
--- a/platformio.txt
+++ b/platformio.txt
@@ -0,0 +1,100 @@
+; PlatformIO Project Configuration File (for copy and paste)
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; http://docs.platformio.org/page/projectconf.html
+[platformio]
+src_dir = lighthub
+[env:due]
+  platform = atmelsam
+  framework = arduino
+  board = due
+  build_flags =
+      -D Wiz5500
+  ib_deps =
+    https://github.com/sebnil/DueFlashStorage
+    https://github.com/anklimov/Arduino-Temperature-Control-Library.git
+    https://github.com/anklimov/DS2482_OneWire
+    https://github.com/anklimov/DmxDue
+    https://github.com/arduino-libraries/ArduinoHttpClient
+    https://github.com/anklimov/aJson
+    https://github.com/anklimov/CmdArduino
+    https://github.com/anklimov/ModbusMaster
+    https://github.com/anklimov/Ethernet2
+    https://github.com/PaulStoffregen/SPI.git
+    https://github.com/knolleary/pubsubclient.git
+    https://github.com/anklimov/Artnet.git
+    [env:megaatmega2560-5500]
+        platform = atmelavr
+        board = megaatmega2560
+        framework = arduino
+        build_flags = -D Wiz5500
+        lib_deps =
+          https://github.com/anklimov/Arduino-Temperature-Control-Library.git
+          https://github.com/anklimov/DS2482_OneWire
+          https://github.com/anklimov/DmxSimple
+          https://github.com/anklimov/HTTPClient
+          https://github.com/anklimov/aJson
+          https://github.com/anklimov/CmdArduino
+          https://github.com/anklimov/ModbusMaster
+          https://github.com/anklimov/DMXSerial
+          https://github.com/anklimov/Ethernet2
+          https://github.com/PaulStoffregen/SPI.git
+          https://github.com/knolleary/pubsubclient.git
+          https://github.com/anklimov/Artnet.git
+    [env:megaatmega2560]
+        platform = atmelavr
+        board = megaatmega2560
+        framework = arduino
+        lib_deps =
+          https://github.com/anklimov/Arduino-Temperature-Control-Library.git
+          https://github.com/anklimov/DS2482_OneWire
+          https://github.com/anklimov/DmxSimple
+          https://github.com/anklimov/HTTPClient
+          https://github.com/anklimov/aJson
+          https://github.com/anklimov/CmdArduino
+          https://github.com/anklimov/ModbusMaster
+          https://github.com/anklimov/DMXSerial
+          https://github.com/anklimov/Ethernet
+          https://github.com/PaulStoffregen/SPI.git
+          https://github.com/knolleary/pubsubclient.git
+          https://github.com/anklimov/Artnet.git
+
+
+    [env:due]
+          platform = atmelsam
+          framework = arduino
+          board = due
+          ib_deps =
+            https://github.com/sebnil/DueFlashStorage
+            https://github.com/anklimov/Arduino-Temperature-Control-Library.git
+            https://github.com/anklimov/DS2482_OneWire
+            https://github.com/anklimov/DmxDue
+            https://github.com/arduino-libraries/ArduinoHttpClient
+            https://github.com/anklimov/aJson
+            https://github.com/anklimov/CmdArduino
+            https://github.com/anklimov/ModbusMaster
+            https://github.com/anklimov/Ethernet
+            https://github.com/PaulStoffregen/SPI.git
+            https://github.com/knolleary/pubsubclient.git
+            https://github.com/anklimov/Artnet.git
+
+    [env:espressif8266]
+        platform= espressif8266
+        framework = arduino
+        board = nodemcuv2
+        ib_deps =
+          https://github.com/anklimov/Arduino-Temperature-Control-Library.git
+          https://github.com/anklimov/DS2482_OneWire
+          https://github.com/anklimov/ESP-Dmx
+          https://github.com/arduino-libraries/ArduinoHttpClient
+          https://github.com/anklimov/aJson
+          https://github.com/anklimov/CmdArduino
+          https://github.com/anklimov/ModbusMaster
+          https://github.com/anklimov/DMXSerial
+          https://github.com/knolleary/pubsubclient.git
+          https://github.com/anklimov/Artnet.git