andry/lighthub
1
0
Fork 0
mirror of https://github.com/anklimov/lighthub synced 2025-12-06 11:49:51 +03:00
Code Issues Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Andrey Klimov
2019-03-04 01:01:46 +03:00
committed by GitHub
parent 98db109235
commit ba535a6e12
1 changed files with 10 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

19
README.md
View File

@@ -30,25 +30,27 @@ Scalability of Lighthub is virtually unlimited: Setup so many controllers you ne
* [Channel commands](https://github.com/anklimov/lighthub/wiki/Channel-commands)
* [OpenHab integration](https://github.com/anklimov/lighthub/wiki/OpenHab--integration)
Finished portation of project to Arduino DUE and ESP8266 (ESP32 not tested).
Portation from AVR Mega 2560 to SAM3X8E (Arduino DUE) done since v 0.96 and tested against Wiznet 5100 Ethernet shield and Wiznet 5500 Ethernet module
# Platforms specific details:
AVR version is basic, long time in production and have all functions
*DMX-out is software (DMXSimple) on pin3
**AVR** version (Arduino Mega) is basic, long time in production and have all functions
* DMX-out is software (DMXSimple) on pin3, can be re-defined to PIN 18 (USART1 TX)
* DMX-in - hardware
* WIZNET 5100 and 5500 are supported
* Modbus on USART2
**SAM3X8E**: (Tested. In production. Recomended hardware at current moment)
* default PWM out frequency
* both, DMX-in and DMX-out are hardware USART based. Use USART1 (pins 18 and 19) for DMX-out and DMX-in
* WIZNET 5100 and 5500 are supported
* Modbus on USART2
**ESP8266**: (Developed but not tested in production)
**ESP8266**: (Developed, working, but not tested in production)
* DMX-OUT on USART1 TX
* DMX-IN - not possible to deploy in ESP8266
* DMX-IN - disabled - not possible to deploy in ESP8266
* Modbus - disabled. Might be configured in future on USART0 instead CLI/DEBUG
**ESP32**, **NRF52840** : Still early development stage
# Custom build flags
@@ -102,4 +104,3 @@ AVR version is basic, long time in production and have all functions
* SYSLOG_ENABLE disabled
* WITH_PRINTEX_LIB diabled, using Streaming library
If you've using Arduino IDE to compile & flash firmware, it will use Default options above and you will not able to configure additional compilers options except edit "options.h" file