uartBridge refactored & cross-compiled. new Mega dev

build-flags/build_flags_due

@@ -6,4 +6,5 @@
 -DOTA
 -DSTATUSLED
 #-DPID_DISABLE
+-DUARTBRIDGE_ENABLE
 

build-flags/build_flags_mega2560slim-5100

@@ -13,4 +13,5 @@
 -DAC_DISABLE
 -DSYSLOG_ENABLE
 -DPID_DISABLE
--DWiz5100
+-DWiz5100
+-DMOTOR_DISABLE

build-flags/build_flags_mega2560slim2

@@ -0,0 +1,18 @@
+
+#-DMODBUS_DIMMER_PARAM=SERIAL_8E1
+#-DAVR_DMXOUT_PIN=18
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+-DMBUS_DISABLE
+-DOWIRE_DISABLE
+-DDHT_DISABLE
+-DCOUNTER_DISABLE
+-DNO_HOMIE
+-DCSSHDC_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE
+-DSYSLOG_ENABLE
+-DPID_DISABLE
+-DOTA
+-DMOTOR_DISABLE
+#-DWiz5100

compiled/Mega2560-optiboot/optiboot.hex

@@ -0,0 +1,61 @@
+:020000023000CC
+:10FC000002C0EFC037C1112484B7882369F0982F50
+:10FC10009A70923049F081FF02C097EF94BF282E6E
+:10FC200080E002D10C94000085E08093810082E0A6
+:10FC30008093C00088E18093C1008CE08093C40071
+:10FC400086E08093C2008EE0EFD0279A84E023EC18
+:10FC50003FEF91E0309385002093840096BBB09BEA
+:10FC6000FECF1F9AA8954091C00047FD02C0815069
+:10FC700089F7CED0813479F4CBD0C82FDBD0C2380D
+:10FC800011F480E004C088E0C13809F083E0B9D005
+:10FC900080E1B7D0EECF823419F484E1D3D0F8CF2D
+:10FCA000853411F485E0FACF853581F4B1D0E82EA2
+:10FCB000AFD0F82E87FF07C08BB781608BBFEE0CEB
+:10FCC000FF1CB8D0E5CF8BB78E7FF8CF863579F49F
+:10FCD0009FD08D3451F49CD0CBB79AD0C170880F8F
+:10FCE0008C2B8BBF81E0AED0CCCF83E0FCCF8436B1
+:10FCF00009F046C08DD0C82FD0E0DC2FCC2788D0AB
+:10FD0000C82B86D0D82E5E018EEFB81A00E012E024
+:10FD10004801EFEF8E1A9E0A7BD0F80180838401A0
+:10FD20008A149B04A9F786D0F5E410E000E0DF1602
+:10FD300009F150E040E063E0C70153D08701C12CD6
+:10FD400092E0D92EF601419151916F0161E0C80115
+:10FD500048D00E5F1F4F2297A9F750E040E065E0C2
+:10FD6000C7013FD095CF6081C8018E0D9F1D01D185
+:10FD70000F5F1F4FF801FE5FC017D107A1F788CFB3
+:10FD8000843701F545D0C82FD0E0DC2FCC2740D0F8
+:10FD9000C82B3ED0D82E4ED08701F5E4DF120BC021
+:10FDA000CE0DDF1DC801DDD02CD00F5F1F4FC01757
+:10FDB000D107C1F76DCFF80187918F0122D021972C
+:10FDC000D1F766CF853739F435D08EE11AD088E97E
+:10FDD00018D081E05CCF813509F073CF88E024D062
+:10FDE00070CFFC010A0167BFE895112407B600FC3B
+:10FDF000FDCF667029F0452B19F481E187BFE895A6
+:10FE000008959091C00095FFFCCF8093C60008959F
+:10FE10008091C00087FFFCCF8091C00084FD01C0AD
+:10FE2000A8958091C6000895E0E6F0E098E19083FF
+:10FE300080830895EDDF803219F088E0F5DFFFCF91
+:10FE400084E1DFCFCF93C82FE3DFC150E9F7CF9133
+:10FE5000F1CFCF92DF92EF92FF92DC01CB01642FC2
+:10FE60006D01EE24FF24CBBEA901FF90EF90DF903F
+:10FE7000CF90B7CF2F923F924F925F926F927F9227
+:10FE80008F929F92AF92BF92CF92DF92EF92FF92AA
+:10FE90000F931F93CF93DF9300D0CDB7DEB7180138
+:10FEA000E9826B017C0110E000E029013A014C1865
+:10FEB0005D086E087F0846015701840C951CA61C3E
+:10FEC000B71C0215130531F489818823A1F188E05C
+:10FED000ABDFFFCF30E020E043E0C701B601B9DF80
+:10FEE00080E890E09B838A83ABBEF4012791369132
+:10FEF000C501B401641975098609970941E0A9DFB4
+:10FF00008A819B8101979B838A8392E0890E911C51
+:10FF1000A11CB11C8A819B81892B31F730E020E044
+:10FF200045E0C701B60195DF9FEFD91AE90AF90A42
+:10FF30000F5F1F4FC0CF0F900F900F90DF91CF91A9
+:10FF40001F910F91FF90EF90DF90CF90BF90AF90F7
+:10FF50009F908F907F906F905F904F903F902F90E9
+:10FF60000895F999FECF92BD81BDF89A992780B581
+:10FF70000895262FF999FECF1FBA92BD81BD20BDED
+:0EFF80000FB6F894FA9AF99A0FBE01960895FA
+:02FFFE000008F9
+:040000033000FC00CD
+:00000001FF

compiled/due/uploadOTA.bat

@@ -1,5 +1 @@
-<<<<<<< HEAD
-..\tools\win\arduinoOTA.exe -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch
-=======
 ..\tools\win\arduinoOTA.exe -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch
->>>>>>> 9b164a1dfc40ee0e8f29dbedff4f3954edf55d76

compiled/esp32-wifi/data/config.json

@@ -0,0 +1,62 @@
+{
+  "syslog":["192.168.88.2"],
+  "mqtt1":["esp32","m2m.eclipse.org"],
+  "mqtt":["elevator","192.168.88.2"],
+  "mqtt4":["esp32","test.mosquitto.org"],
+  "dmx":[30],
+  "items": {
+    "relay1":[6,32],
+    "relay2":[6,33],
+    "relays":[7,["relay1","relay2"]],
+    "sensair1":[44,[254,
+                  "sensair",
+                  {"co2":{"emit":"co2"}},
+                  {"mode":"auto"}
+                  ]
+              ],
+    "elevator":[15,{"baud":9600,"serial":"8N1","ip":"192.168.88.255","port":502}],          
+              
+    "aaa1":[44,[254,
+                  "aaa",
+                  {"aaa1":{"emit":"aaa2"}},
+                  {"mode":"auto"}
+                  ]
+              ]
+    },
+   "modbus":
+   {
+   "aaa":
+              {"baud":19200,
+               "poll":{"irs":[1]},
+                "par":{
+                  "aaa1":{"ir":1}
+                }
+                
+              },
+   "sensair":{"baud":9600,
+             "poll":{"irs":[[0,3],21,[25,30]],"regs":[0,1,31],"delay":1000},
+             "par":{
+                            "co2":{"ir":3},
+                            "meterStat":{"ir":0},
+                            "alarmStat":{"ir":1},
+                            "outStat":{"ir":0},
+                            "pwm":{"ir":21},
+                            "typeid":{"ir":25,"type":"u32"},
+                            "mapver":{"ir":27},
+                            "fwver":{"ir":28},
+                            "sensorid":{"ir":29,"type":"u32"},
+                            "ack":{"reg":0},
+                            "command":{"reg":1},
+                            "abc":{"reg":31}
+                            
+                            
+             }
+          
+    }
+   },
+  
+"in":{    "34":{"item":"relays","emit":"myhome/in/bedr","scmd":"TOGGLE","rcmd":""},
+
+          "17":{"T":64,"emit":"analog","map":[0,1024,0,100,15]}
+         }
+}

compiled/mega2560slim2/uploadOTA.bat

@@ -0,0 +1 @@
+..\tools\win\arduinoOTA.exe -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/mega2560slim2/uploadOTA.sh

@@ -0,0 +1 @@
+../tools/mac/arduinoOTA -address 192.168.88.67 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/update_bin.sh

@@ -2,6 +2,8 @@ cp ../.pio/build/due/firmware.bin due
 cp ../.pio/build/controllino/firmware.hex controllino
 cp ../.pio/build/m5stack/firmware.bin m5stack
 cp ../.pio/build/mega2560slim-5100/firmware.hex mega2560slim-5100
+cp ../.pio/build/mega2560slim2/firmware.hex mega2560slim2
+cp ../.pio/build/mega2560slim2/firmware.bin mega2560slim2
 cp ../.pio/build/due-5100/firmware.bin due-5100
 cp ../.pio/build/mega2560-5100/firmware.hex mega2560-5100
 cp ../.pio/build/due-5500/firmware.bin due-5500

lighthub/main.cpp

@@ -82,7 +82,6 @@ EthernetClient ethClient;
 
 #if defined(OTA)
 #include <ArduinoOTA.h>
-//bool OTA_initialized=false;
 #endif
 
 #if defined(__SAM3X8E__)
@@ -103,6 +102,7 @@ NRFFlashStorage EEPROM;
 
 #ifdef SYSLOG_ENABLE
 #include <Syslog.h>
+
     #ifndef WIFI_ENABLE
     EthernetUDP udpSyslogClient;
     #else
@@ -121,7 +121,7 @@ Streamlog errorSerial(&debugSerialPort,LOG_ERROR, ledRED);
 Streamlog infoSerial (&debugSerialPort,LOG_INFO);
 #endif
 
-statusLED LED(ledRED);
+StatusLED statusLED(ledRED);
 
 
 lan_status lanStatus = INITIAL_STATE;
@@ -271,7 +271,7 @@ void mqttCallback(char *topic, byte *payload, unsigned int length) {
         return;
     }
     
-    LED.flash(ledBLUE);
+    statusLED.flash(ledBLUE);
     for (unsigned int i = 0; i < length; i++)
         debugSerial<<((char) payload[i]);
     debugSerial<<endl;
@@ -378,23 +378,40 @@ if (element && element->type == aJson_String) return element->valuestring;
   return NULL;
 }
 
- #if defined(ARDUINO_ARCH_ESP32) || defined(ESP8266)
- #define flashStorage InternalStorage
- #else
-InternalStorageClass flashStorage(EEPROM_offsetJSON);
-#endif
-
-void setupOTA(void)
-{
 #ifdef OTA
-//if (OTA_initialized) return;
+    #if (defined(ARDUINO_ARCH_ESP32) || defined(ESP8266))
-//        ArduinoOTA.end();
+    void setupOTA(void)
-        // start the OTEthernet library with internal (flash) based storage
+    {
-        ArduinoOTA.begin(Ethernet.localIP(), "Lighthub", "password", flashStorage);
+
-        infoSerial<<F("OTA initialized\n");
+            ArduinoOTA.begin(Ethernet.localIP(), "Lighthub", "password", InternalStorage);
-//OTA_initialized=true;
+            infoSerial<<F("OTA initialized\n");
+
+    }
+    #elif defined (ARDUINO_ARCH_AVR)
+    InternalStorageAVRClass flashStorage;
+        void setupOTA(void)
+    {
+
+            ArduinoOTA.begin(Ethernet.localIP(), "Lighthub", "password", flashStorage);
+            infoSerial<<F("OTA initialized\n");
+
+    }
+    #else 
+    InternalStorageClass flashStorage(EEPROM_offsetJSON);
+    void setupOTA(void)
+    {
+
+            ArduinoOTA.begin(Ethernet.localIP(), "Lighthub", "password", flashStorage);
+            infoSerial<<F("OTA initialized\n");
+
+    }
+    #endif
+
+
+
+#else 
+void setupOTA(void) {};
 #endif
-}
 
 void setupSyslog()
 {
@@ -414,7 +431,7 @@ void setupSyslog()
         char *syslogServer = getStringFromConfig(udpSyslogArr, 0);
         if (n>1) syslogPort = aJson.getArrayItem(udpSyslogArr, 1)->valueint;
 
-        inet_ntoa_r(Ethernet.localIP(),syslogDeviceHostname,sizeof(syslogDeviceHostname));
+        _inet_ntoa_r(Ethernet.localIP(),syslogDeviceHostname,sizeof(syslogDeviceHostname));
         infoSerial<<F("Syslog params:")<<syslogServer<<":"<<syslogPort<<":"<<syslogDeviceHostname<<endl;
         udpSyslog.server(syslogServer, syslogPort);
         udpSyslog.deviceHostname(syslogDeviceHostname);
@@ -439,8 +456,8 @@ lan_status lanLoop() {
     switch (lanStatus) {
 
         case INITIAL_STATE:
-          //  LED.set(ledRED|((configLoaded)?ledBLINK:0));
+          //  statusLED.set(ledRED|((configLoaded)?ledBLINK:0));
-              LED.set(ledRED|((configLoaded)?ledBLINK:0));
+              statusLED.set(ledRED|((configLoaded)?ledBLINK:0));
 
             #if  defined(WIFI_ENABLE)
                 onInitialStateInitLAN(); // Moves state to AWAITING_ADDRESS or HAVE_IP_ADDRESS
@@ -485,7 +502,7 @@ lan_status lanLoop() {
         break;
 
         case LIBS_INITIALIZED:
-            LED.set(ledRED|ledGREEN|((configLoaded)?ledBLINK:0));
+            statusLED.set(ledRED|ledGREEN|((configLoaded)?ledBLINK:0));
             if (configLocked) return LIBS_INITIALIZED;      
 
             if (!configOk)
@@ -496,7 +513,7 @@ lan_status lanLoop() {
 
         case IP_READY_CONFIG_LOADED_CONNECTING_TO_BROKER:
             wdt_res();
-            LED.set(ledRED|ledGREEN|((configLoaded)?ledBLINK:0));
+            statusLED.set(ledRED|ledGREEN|((configLoaded)?ledBLINK:0));
             ip_ready_config_loaded_connecting_to_broker();
             break;
 
@@ -517,7 +534,7 @@ lan_status lanLoop() {
             }
             break;
         case OPERATION:
-            LED.set(ledGREEN|((configLoaded)?ledBLINK:0));
+            statusLED.set(ledGREEN|((configLoaded)?ledBLINK:0));
             if (!mqttClient.connected()) lanStatus = IP_READY_CONFIG_LOADED_CONNECTING_TO_BROKER;//2;
             break;
 
@@ -525,7 +542,7 @@ lan_status lanLoop() {
              //if (mqttClient.connected()) mqttClient.disconnect();  // Hmm hungs then cable disconnected
              timerLanCheckTime = millis();// + 5000;
              lanStatus = REINIT;
-             LED.set(ledRED|((configLoaded)?ledBLINK:0));
+             statusLED.set(ledRED|((configLoaded)?ledBLINK:0));
              break;
 
         case REINIT: // Pause and re-init LAN
@@ -831,7 +848,9 @@ void onInitialStateInitLAN() {
                 WiFi.mode(WIFI_STA); // ESP 32 - WiFi.disconnect(); instead
                 infoSerial<<F("WIFI AP/Password:")<<QUOTE(ESP_WIFI_AP)<<F("/")<<QUOTE(ESP_WIFI_PWD)<<endl;
 
+                #ifndef ARDUINO_ARCH_ESP32
                 wifi_set_macaddr(STATION_IF,mac); //ESP32 to check
+                #endif
 
                 WiFi.begin(QUOTE(ESP_WIFI_AP), QUOTE(ESP_WIFI_PWD));
 
@@ -1276,16 +1295,16 @@ void cmdFunctionIp(int arg_cnt, char **args)
 
   //  switch (arg_cnt) {
     //    case 5:
-            if (arg_cnt>4 && inet_aton(args[4], ip)) saveFlash(OFFSET_MASK, ip);
+            if (arg_cnt>4 && _inet_aton(args[4], ip)) saveFlash(OFFSET_MASK, ip);
             else saveFlash(OFFSET_MASK, ip0);
     //    case 4:
-            if (arg_cnt>3 && inet_aton(args[3], ip)) saveFlash(OFFSET_GW, ip);
+            if (arg_cnt>3 && _inet_aton(args[3], ip)) saveFlash(OFFSET_GW, ip);
             else saveFlash(OFFSET_GW, ip0);
     //    case 3:
-            if (arg_cnt>2 && inet_aton(args[2], ip)) saveFlash(OFFSET_DNS, ip);
+            if (arg_cnt>2 && _inet_aton(args[2], ip)) saveFlash(OFFSET_DNS, ip);
             else saveFlash(OFFSET_DNS, ip0);
     //    case 2:
-            if (arg_cnt>1 && inet_aton(args[1], ip)) saveFlash(OFFSET_IP, ip);
+            if (arg_cnt>1 && _inet_aton(args[1], ip)) saveFlash(OFFSET_IP, ip);
             else saveFlash(OFFSET_IP, ip0);
     //        break;
 
@@ -1422,15 +1441,18 @@ lan_status loadConfigFromHttp(int arg_cnt, char **args)
     //if (freeRam()<512) cleanConf();
 
     HTTPClient hclient(configServer, 80);
+    debugSerial<<F("free ")<<freeRam()<<endl;delay(100);
     // FILE is the return STREAM type of the HTTPClient
     configStream = hclient.getURI(URI);
+    debugSerial<<F("hclient")<<endl;delay(100);
     responseStatusCode = hclient.getLastReturnCode();
+    debugSerial<<F("retcode ")<<responseStatusCode<<endl;delay(100);
     //wdt_en();
-
+    
     if (configStream != NULL) {
         if (responseStatusCode == 200) {
 
-            infoSerial<<F("got Config\n");
+            infoSerial<<F("got Config\n"); delay(500);
             char c;
             aJsonFileStream as = aJsonFileStream(configStream);
             noInterrupts();
@@ -1519,10 +1541,11 @@ lan_status loadConfigFromHttp(int arg_cnt, char **args)
 
 #if defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_ESP32) //|| defined (NRF5)
     HTTPClient httpClient;
+    WiFiClient wifiClient;
     String fullURI = "http://";
     fullURI+=configServer;
     fullURI+=URI;
-    httpClient.begin(fullURI);
+    httpClient.begin(wifiClient,fullURI);
     int httpResponseCode = httpClient.GET();
     if (httpResponseCode > 0) {
         infoSerial.printf("[HTTP] GET... code: %d\n", httpResponseCode);
@@ -1786,11 +1809,16 @@ infoSerial<<F("\n(-)PID");
 #endif
 
 #ifdef SYSLOG_ENABLE
-//udpSyslogClient.begin(SYSLOG_LOCAL_SOCKET);
 infoSerial<<F("\n(+)SYSLOG");
 #else
 infoSerial<<F("\n(-)SYSLOG");
 #endif
+
+#ifdef UARTBRIDGE_ENABLE
+infoSerial<<F("\n(+)UARTBRIDGE");
+#else
+infoSerial<<F("\n(-)UARTBRIDGE");
+#endif
 infoSerial<<endl;
 
 //    WDT_Disable( WDT ) ;
@@ -1888,8 +1916,8 @@ void setupCmdArduino() {
     cmdAdd("reboot",cmdFunctionReboot);
 }
 
-void loop_main() {
+void loop_main() { 
-  LED.poll();
+  statusLED.poll();
 
   #if defined(M5STACK)
    // Initialize the M5Stack object
@@ -1900,7 +1928,7 @@ void loop_main() {
     wdt_res();
     yield();
     cmdPoll();
-    if (lanLoop() > HAVE_IP_ADDRESS) {
+    if (lanLoop() > HAVE_IP_ADDRESS) { 
         mqttClient.loop();
 
         #if defined(OTA)
@@ -1967,7 +1995,7 @@ ethernetIdleCount--;
 };
 
 void modbusIdle(void) {
-    LED.poll();
+    statusLED.poll();
     yield();
     cmdPoll();
     wdt_res();
@@ -2065,9 +2093,9 @@ configLocked--;
 
 
 void pollingLoop(void) {
+ if (!items) return;   
 // FAST POLLINT - as often AS possible every item
 configLocked++;
-if (items) {
     aJsonObject * item = items->child;
     while (items && item)
         if (item->type == aJson_Array && aJson.getArraySize(item)>1) {
@@ -2078,7 +2106,6 @@ if (items) {
             yield();
             item = item->next;
         }  //if
-}
 configLocked--;
 // SLOW POLLING
     boolean done = false;

lighthub/modules/out_modbus.cpp

@@ -356,7 +356,7 @@ return is8bit;
 
                   //if (readModbus(registerFrom,MODBUS_HOLDING_REG_TYPE,registerTo-registerFrom+1))
                   if (readModbus(registerFrom,regType,registerTo-registerFrom+1))
-                    {
+                    { debugSerial<<endl;
                       for(int i=registerFrom;i<=registerTo;i++)
                         {
                           findRegister(i,i-registerFrom,regType);
@@ -382,7 +382,6 @@ if ((store->pollingRegisters || store->pollingIrs) && !modbusBusy && (Status() =
     modbusSerial.begin(store->baud, static_cast <USARTClass::USARTModes> (store->serialParam));
     #elif defined (ARDUINO_ARCH_ESP8266)
     modbusSerial.begin(store->baud, static_cast <SerialConfig>(store->serialParam));
-    Serial1.begin()
     #elif defined (ESP32)
     //modbusSerial.begin(store->baud, store->serialParam);
     //delay(100);

lighthub/modules/out_uartbridge.cpp

@@ -7,71 +7,37 @@
 #include "Streaming.h"
 
 #include "item.h"
-#include <ModbusMaster.h>
+//#include <ModbusMaster.h>
 #include "main.h"
 #include <HardwareSerial.h>
 
 #include "main.h"
 
-#if defined (ESP32)
+
-#include <AsyncUDP.h>
+#include <Udp.h>
-AsyncUDP udp;
+#ifndef WIFI_ENABLE
-AsyncUDPMessage udpMessageA;
+EthernetUDP udpClientA;
-AsyncUDPMessage udpMessageB;
+EthernetUDP udpClientB;
+#else
+WiFiUDP udpClientA;
+WiFiUDP udpClientB;
+#endif
 
 IPAddress       targetIP;
 uint16_t        targetPort=5555;
-#endif
 
+short halfduplex=1;
+bool  udpdump=false;
 uint32_t timerA = 0;
 uint32_t timerB = 0;
+uint16_t sizeA  = 0;
+uint16_t sizeB  = 0;
 
+//extern aJsonObject *modbusObj;
+//extern ModbusMaster node;
+//extern short modbusBusy;
+//extern void modbusIdle(void) ;
 
-extern aJsonObject *modbusObj;
-extern ModbusMaster node;
-extern short modbusBusy;
-extern void modbusIdle(void) ;
-
-/*
-struct reg_t
-{
-  const char verb[4];
-  const uint8_t id;
-};
-
-
-#define PAR_I16 1
-#define PAR_I32 2
-#define PAR_U16 3
-#define PAR_U32 4
-#define PAR_I8H 5
-#define PAR_I8L 6
-#define PAR_U8H 7
-#define PAR_U8L 8
-#define PAR_TENS 9
-
-const reg_t regSize_P[] PROGMEM =
-{
-  { "i16", (uint8_t) PAR_I16 },
-  { "i32", (uint8_t) PAR_I32 },
-  { "u16", (uint8_t) PAR_U16 },
-  { "u32", (uint8_t) PAR_U32 },
-  { "i8h", (uint8_t) PAR_I8H },
-  { "i8l", (uint8_t) PAR_I8L },
-  { "u8h", (uint8_t) PAR_U8H },
-  { "u8l", (uint8_t) PAR_U8L },
-  { "x10", (uint8_t) PAR_TENS }
-} ;
-#define regSizeNum sizeof(regSize_P)/sizeof(reg_t)
-
-int  str2regSize(char * str)
-{
-  for(uint8_t i=0; i<regSizeNum && str;i++)
-      if (strcmp_P(str, regSize_P[i].verb) == 0)
-           return pgm_read_byte_near(&regSize_P[i].id);
-  return (int) PAR_I16;
-}
-*/
 
 bool out_UARTbridge::getConfig()
 {
@@ -106,11 +72,20 @@ bool out_UARTbridge::getConfig()
     
     aJsonObject * debugIPObj=aJson.getObjectItem(item->itemArg, "ip");
     aJsonObject * debugPortObj=aJson.getObjectItem(item->itemArg, "port");
+    aJsonObject * hdObj=aJson.getObjectItem(item->itemArg, "hd");
 
     if (debugIPObj)
+          {
           _inet_aton(debugIPObj->valuestring, targetIP);
+           if (udpClientA.begin(SOURCE_PORT_A) && udpClientB.begin(SOURCE_PORT_B))  udpdump=true;
+           else {
+                  udpClientA.stop(); udpClientB.stop(); udpdump=false; 
+                  errorSerial<<F("No sockets available, udpdump disabled")<<endl;
+                }
+          }
 
-    if (debugPortObj) targetPort = debugPortObj->valueint;      
+    if (debugPortObj) targetPort = debugPortObj->valueint;     
+    if (hdObj) halfduplex = hdObj->valueint;  
 
   return true;
   }
@@ -125,7 +100,12 @@ if (!store)
               { errorSerial<<F("UARTbridge: Out of memory")<<endl;
                 return 0;}
 
-//store->timestamp=millisNZ();
+
+ sizeA=0;
+ sizeB=0;
+ timerA=0;
+ timerB=0;           
+
 if (getConfig())
     {
         infoSerial<<F("UARTbridge config loaded ")<< item->itemArr->name<<endl;
@@ -143,6 +123,10 @@ else
 int  out_UARTbridge::Stop()
 {
 Serial.println("UARTbridge De-Init");
+ 
+ udpClientA.stop();
+ udpClientB.stop();
+ udpdump=false;
 
 delete store;
 item->setPersistent(NULL);
@@ -157,11 +141,75 @@ if (store)
 return CST_UNKNOWN;
 }
 
+void flushA()
+{
+if (sizeA)
+  {  
+    if (lanStatus>=HAVE_IP_ADDRESS && udpdump)  udpClientA.endPacket();
+    debugSerial<<endl;
+  }
+timerA=0;   
+sizeA=0;
+}
+
+void flushB()
+{
+if (sizeB)
+   {   
+     if (lanStatus>=HAVE_IP_ADDRESS && udpdump)  udpClientB.endPacket();
+      debugSerial<<endl;
+   }
+timerB=0;
+sizeB=0;   
+}
+
 int out_UARTbridge::Poll(short cause)
 {
   uint8_t chA;
   uint8_t chB;
 
+  while (MODULE_UATRBRIDGE_UARTA.available() || MODULE_UATRBRIDGE_UARTB.available())
+          {
+
+          if (MODULE_UATRBRIDGE_UARTA.available())
+              {
+              if (!sizeA)
+                {
+                 if  (lanStatus>=HAVE_IP_ADDRESS && udpdump) udpClientA.beginPacket(targetIP, targetPort);
+                 if (halfduplex) flushB(); 
+                }
+                  
+              timerA=millisNZ();
+              ////if (timerB) return 1;
+              chA=MODULE_UATRBRIDGE_UARTA.read();  
+              MODULE_UATRBRIDGE_UARTB.write(chA);
+              debugSerial<<F("<")<<((chA<16)?"0":"")<<_HEX(chA);
+              if (lanStatus>=HAVE_IP_ADDRESS && udpdump) {udpClientA.write(chA);}
+              sizeA++;           
+              }
+
+          if (MODULE_UATRBRIDGE_UARTB.available())
+              {
+              if (!sizeB)
+                 { 
+                  if (lanStatus>=HAVE_IP_ADDRESS && udpdump) udpClientB.beginPacket(targetIP, targetPort);  
+                  if (halfduplex) flushA();
+                 } 
+              timerB=millisNZ();  
+              ////if (timerA) return 1;
+              chB=MODULE_UATRBRIDGE_UARTB.read();  
+              MODULE_UATRBRIDGE_UARTA.write(chB);
+              debugSerial<<F(">")<<((chB<16)?"0":"")<<_HEX(chB);
+              if (lanStatus>=HAVE_IP_ADDRESS && udpdump) {udpClientB.write(chB);};
+              sizeB++;
+              }
+          }
+
+if ((timerA && (isTimeOver(timerA,millis(),PDELAY)) || sizeA>=MAX_PDU)) flushA();
+if ((timerB && (isTimeOver(timerB,millis(),PDELAY)) || sizeB>=MAX_PDU)) flushB();
+
+
+/*
 if ((lanStatus>=HAVE_IP_ADDRESS) && udpMessageA.length() && (isTimeOver(timerA,millis(),PDELAY) || timerB))
 {
   udp.sendTo(udpMessageA,targetIP,targetPort);
@@ -201,19 +249,8 @@ if ((lanStatus>=HAVE_IP_ADDRESS) && udpMessageB.length() && (isTimeOver(timerB,m
               udpMessageB.write(chB);
               }
           }
-/*
-    while (MODULE_UATRBRIDGE_UARTB.available())
-          {
-          chB=MODULE_UATRBRIDGE_UARTB.read();  
-          MODULE_UATRBRIDGE_UARTA.write(chB);
-          debugSerial<<F(">")<<((chB<10)?"0":"")<<_HEX(chB);
-          udpMessageB.write(chB);
-          timerB=millisNZ();
-          }        
 */
 
-
-
 return 1;//store->pollingInterval;
 };
 

lighthub/modules/out_uartbridge.h

@@ -12,6 +12,10 @@
 #define serialParamType uint16_t
 #endif
 
+#define SOURCE_PORT_A 5551
+#define SOURCE_PORT_B 5552
+#define MAX_PDU 1024
+
 #ifndef MODULE_UATRBRIDGE_UARTA
 #define MODULE_UATRBRIDGE_UARTA Serial1
 #endif

lighthub/statusled.cpp

@@ -22,7 +22,7 @@ e-mail    anklimov@gmail.com
 #include "utils.h"
 
 
-statusLED::statusLED(uint8_t pattern)
+StatusLED::StatusLED(uint8_t pattern)
 {
 #if defined (STATUSLED)
   pinMode(pinRED, OUTPUT);
@@ -33,7 +33,7 @@ statusLED::statusLED(uint8_t pattern)
 #endif
 }
 
-void statusLED::show (uint8_t pattern)
+void StatusLED::show (uint8_t pattern)
 {
 #if defined (STATUSLED)
     digitalWrite(pinRED,(pattern & ledRED)?HIGH:LOW );
@@ -42,7 +42,7 @@ void statusLED::show (uint8_t pattern)
 #endif
 }
 
-void statusLED::set (uint8_t pattern)
+void StatusLED::set (uint8_t pattern)
 {
 #if defined (STATUSLED)
     short newStat = pattern & ledParams;
@@ -56,7 +56,7 @@ void statusLED::set (uint8_t pattern)
 #endif
 }
 
-void statusLED::flash(uint8_t pattern)
+void StatusLED::flash(uint8_t pattern)
 {
 #if defined (STATUSLED)
   show(pattern);
@@ -64,7 +64,7 @@ void statusLED::flash(uint8_t pattern)
 #endif
 }
 
-void statusLED::poll()
+void StatusLED::poll()
 {
 #if defined (STATUSLED)
   if (curStat & ledFlash)

lighthub/statusled.h

@@ -30,16 +30,22 @@ e-mail    anklimov@gmail.com
 #define ledFlash 32
 #define ledHidden 64
 
+#if defined(ARDUINO_ARCH_AVR)
+#define pinRED 47
+#define pinGREEN 48
+#define pinBLUE 49
+#else
 #define pinRED 50
 #define pinGREEN 51
 #define pinBLUE 52
+#endif
 
 #define ledDelayms 1000UL
 #define ledFastDelayms 300UL
 
-class statusLED {
+class StatusLED {
 public:
-  statusLED(uint8_t pattern = 0);
+  StatusLED(uint8_t pattern = 0);
   void set (uint8_t pattern);
   void show (uint8_t pattern);
   void poll();

lighthub/streamlog.cpp

@@ -3,7 +3,7 @@
 #include "statusled.h"
 
 #if defined (STATUSLED)
-extern statusLED LED;
+extern StatusLED statusLED;
 #endif
 
 #ifdef SYSLOG_ENABLE
@@ -77,7 +77,7 @@ if (syslogInitialized)
 #endif
 
   #if defined (STATUSLED)
-  if ((ch=='\n') && ledPattern) LED.flash(ledPattern);
+  if ((ch=='\n') && ledPattern) statusLED.flash(ledPattern);
   #endif
 
   if (serialPort) return serialPort->write(ch);

lighthub/utils.cpp

@@ -685,14 +685,14 @@ unsigned long millisNZ(uint8_t shift)
  return now;
 }
 
-struct serial_t
+struct serial_st
 {
   const char verb[4];
   const serialParamType mode;
 };
 
 
-const serial_t serialModes_P[] PROGMEM =
+const serial_st serialModes_P[] PROGMEM =
 {
   { "8E1", (serialParamType) SERIAL_8E1},//(uint16_t) US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_EVEN },
   { "8N1", (serialParamType) SERIAL_8N1},
@@ -703,16 +703,18 @@ const serial_t serialModes_P[] PROGMEM =
 //  { "8M1", SERIAL_8M1},
 //  { "8S1", SERIAL_8S1},
   { "7E1", (serialParamType) SERIAL_7E1},//(uint16_t) US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_EVEN },
-  { "7N1", (serialParamType) SERIAL_7N1},
   { "7E2", (serialParamType) SERIAL_7E2},
-  { "7N2", (serialParamType) SERIAL_7N2},
   { "7O1", (serialParamType) SERIAL_7O1},
   { "7O2", (serialParamType) SERIAL_7O2}
+#ifndef ARDUINO_ARCH_STM32
+  ,{ "7N1", (serialParamType) SERIAL_7N1}   
+  ,{ "7N2", (serialParamType) SERIAL_7N2}
+#endif  
 //  { "7M1", SERIAL_7M1},
 //  { "7S1", SERIAL_7S1}
 } ;
 
-#define serialModesNum sizeof(serialModes_P)/sizeof(serial_t)
+#define serialModesNum sizeof(serialModes_P)/sizeof(serial_st)
 
 serialParamType  str2SerialParam(char * str)
 { debugSerial<<str<<F(" =>");

lighthub/utils.h

@@ -60,8 +60,8 @@ void parseBytes(const char* str, char separator, byte* bytes, int maxBytes, int
 int log(const char *str, ...);
 void printFloatValueToStr(float value, char *valstr);
 void ReadUniqueID( uint32_t * pdwUniqueID );
-int inet_aton(const char* aIPAddrString, IPAddress& aResult);
+int _inet_aton(const char* aIPAddrString, IPAddress& aResult);
-char *inet_ntoa_r(IPAddress addr, char *buf, int buflen);
+char *_inet_ntoa_r(IPAddress addr, char *buf, int buflen);
 void printIPAddress(IPAddress ipAddress);
 char* setTopic(char* buf, int8_t buflen, topicType tt, const char* suffix = NULL);
 void printUlongValueToStr(char *valstr, unsigned long value);

platformio.ini

@@ -12,9 +12,16 @@
 src_dir = lighthub
 default_envs = 
 ;   ****** UNCOMMENT single environment name for target platform below *******
-; Arduino Mega (without onewire) + Ethernet shield Wiznet 5100
+
+; Arduino Mega compact build + Ethernet shield Wiznet 5100, 1-wire, thermostates.
+; Without DMX, Wiznet 5100 network driver
 ;    mega2560slim-5100
 
+; Another Arduino Mega compact build without 1-wire, DMX, but with OTA
+; OPTIBOOT bootloader required! https://github.com/MCUdude/MegaCore
+; universal Wiznet network driver
+;     mega2560slim2
+
 ; Arduino Mega + Ethernet shield Wiznet 5100
 ;    mega2560-5100
 	
@@ -28,7 +35,7 @@ default_envs =
 ;    due-5100
 
 ; Generic DUE
-;     due
+;    due
 ; Arduino DUE + Ethernet shield Wiznet 5500
 ;   due-5500
 
@@ -173,7 +180,11 @@ monitor_filters = esp32_exception_decoder
 build_type = debug
 board = esp32-evb
 monitor_baud = 115200
-upload_speed = 115200
+;upload_speed = 115200
+;upload_command = arduinoOTA -address 192.168.88.60 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE;sleep 5
+upload_command = arduinoOTA -address 192.168.11.230 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE;sleep 5
+upload_protocol = custom
+
 build_flags = !python get_build_flags.py esp32-wifi
 lib_ignore = 
     ;COMMENT/UNCOMMENT next line for software 1-wire driver on/off
@@ -220,6 +231,7 @@ lib_deps =
 	https://github.com/adafruit/Adafruit-MCP23017-Arduino-Library
 	https://github.com/arcao/Syslog.git
 	br3ttb/PID@^1.2.1
+	
 monitor_speed = 115200
 
 [env:due-5100]
@@ -359,7 +371,7 @@ lib_deps =
 	https://github.com/anklimov/CmdArduino
 	https://github.com/anklimov/ModbusMaster
 	https://github.com/anklimov/DMXSerial
-	https://github.com/anklimov/Ethernet
+	https://github.com/anklimov/Ethernet5100
     ;5100 lib have ~90 bytes less footprint of RAM
 	https://github.com/knolleary/pubsubclient.git
 	https://github.com/anklimov/Artnet.git
@@ -376,6 +388,67 @@ lib_deps =
 	br3ttb/PID@^1.2.1
 monitor_speed = 115200
 
+
+[env:mega2560slim2]
+platform = atmelavr
+;For OTA programming - generating bin image
+extra_scripts = post:toBin.py
+;OptiBoot setting
+board = ATmega2560
+;was megaatmega2560 for conventional bootloader
+; Clock frequency in [Hz]
+board_build.f_cpu = 16000000L
+
+; BUILD OPTIONS
+; Comment out to enable LTO (this line unflags it)
+;build_unflags = -flto -  not working without LTO!
+
+upload_protocol = arduino
+board_upload.speed = ${env:fuses_bootloader.board_bootloader.speed}
+framework = arduino
+build_flags = !python get_build_flags.py mega2560slim2
+lib_ignore = 
+    ;DS2482_OneWire   //UNCOMMENT for software 1-wire driver
+	DHT sensor library for ESPx
+	DmxDue
+	DueFlashStorage
+	WifiManager
+	Ethernet3
+	Ethernet2
+	HTTPClient
+	NRFFlashStorage
+	WebServer
+	UIPEthernet
+	ESP_EEPROM
+	M5Stack
+lib_deps = 
+	https://github.com/anklimov/Arduino-Temperature-Control-Library.git
+	https://github.com/anklimov/DS2482_OneWire
+	https://github.com/anklimov/DmxSimple
+	https://github.com/anklimov/httpClient
+	https://github.com/anklimov/aJson
+	https://github.com/anklimov/CmdArduino
+	https://github.com/anklimov/ModbusMaster
+	https://github.com/anklimov/DMXSerial
+	;https://github.com/anklimov/Ethernet5100
+    ;5100 lib have ~90 bytes less footprint of RAM
+	https://github.com/anklimov/Ethernet.git
+	https://github.com/knolleary/pubsubclient.git
+	;https://github.com/anklimov/Artnet.git
+	FastLED@3.3.2
+	Adafruit Unified Sensor
+	DHT sensor library
+	https://github.com/arcao/Syslog.git
+	Streaming
+	ClosedCube HDC1080
+	SparkFun CCS811 Arduino Library@~1.0.7
+	Adafruit NeoPixel
+	https://github.com/anklimov/ArduinoOTA
+	https://github.com/adafruit/Adafruit-MCP23017-Arduino-Library
+	br3ttb/PID@^1.2.1
+monitor_speed = 115200
+
+
 [env:mega2560-5500]
 platform = atmelavr
 board = megaatmega2560
@@ -591,8 +664,8 @@ board = due
 monitor_baud = 115200
 build_flags = !python get_build_flags.py lighthub21
 ;upload_command = arduinoOTA -address 192.168.11.172 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE ;sleep 4
-upload_command = arduinoOTA -address 192.168.88.64 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE;sleep 4
+;upload_command = arduinoOTA -address 192.168.88.45 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE;sleep 4
-upload_protocol = custom
+;upload_protocol = custom
 lib_ignore = 
        ;DS2482_OneWire   //UNCOMMENT for software 1-wire driver
 	DHT sensor library for ESPx
@@ -738,3 +811,39 @@ lib_deps =
 	SPI
 	br3ttb/PID@^1.2.1
 monitor_speed = 115200
+
+; Run the following command to upload with this environment
+; pio run -e Upload_ISP -t upload
+[env:Upload_ISP]
+platform = atmelavr
+framework = arduino
+; Custom upload procedure
+upload_protocol = custom
+; Avrdude upload flags
+upload_flags =
+  -C$PROJECT_PACKAGES_DIR/tool-avrdude/avrdude.conf
+  -p$BOARD_MCU
+  -PUSB
+  -cusbasp
+; Avrdude upload command
+upload_command = avrdude $UPLOAD_FLAGS -U flash:w:$SOURCE:i
+
+
+; Run the following command to set fuses
+; pio run -e fuses_bootloader -t fuses
+; Run the following command to set fuses + burn bootloader
+; pio run -e fuses_bootloader -t bootloader
+[env:fuses_bootloader]
+platform = atmelavr
+framework = arduino
+board_hardware.oscillator = external ; Oscillator type
+board_hardware.uart = uart0          ; Set UART to use for serial upload
+board_bootloader.speed = 115200      ; Set bootloader baud rate
+board_hardware.bod = 2.7v            ; Set brown-out detection
+board_hardware.eesave = yes          ; Preserve EEPROM when uploading using programmer
+upload_protocol = usbasp             ; Use the USBasp as programmer
+upload_flags =                       ; Select USB as upload port and divide the SPI clock by 8
+  -PUSB
+  -B8
+
+;; End of OPTIBOOT stuff

toBin.py

@@ -0,0 +1,14 @@
+from os.path import join
+Import("env", "projenv")
+
+# Custom BIN from ELF
+env.AddPostAction(
+    "$BUILD_DIR/${PROGNAME}.elf",
+    env.VerboseAction(" ".join([
+                "$OBJCOPY",
+                "-O",
+                "binary",
+                "$TARGET",
+                "$BUILD_DIR/${PROGNAME}.bin"
+            ]), "Building $TARGET"))
+