preparing code to AVR and ESP portation

dmx.cpp

@@ -57,6 +57,7 @@ for (short tch=0; tch<=3 ; tch++)
 
 void DMXUpdate(void)
 {
+#if defined(__AVR_ATmega2560__)
 int t;
 for (short tch=0; tch<=3 ; tch++) 
     {
@@ -81,6 +82,7 @@ for (short tch=0; tch<=3 ; tch++)
         }
     }
     //Serial.print(D_State,BIN);Serial.println();
+#endif
 }
 
 
@@ -88,6 +90,7 @@ for (short tch=0; tch<=3 ; tch++)
 {
 //  CHSV hsv;
 //  CRGB rgb;
+#if defined(__AVR_ATmega2560__)
    
 short t,tch;
 //Here code for semi-immediate update
@@ -109,6 +112,7 @@ D_checkT=0;
 DMXput();
 for (int i=1; i<17; i++) {Serial.print(DMXSerial.read(i));Serial.print(";");}
        Serial.println();
+#endif
 }
 
 
@@ -125,6 +129,7 @@ void DMXinSetup(int channels)
  // //Use digital pin 3 for DMX output. Must be a PWM channel.
  // DmxSimple.usePin(pin);
   //DmxSimple.maxChannel(channels);
+ #if defined(__AVR_ATmega2560__)
  
    DMXin = new uint8_t [channels];
   
@@ -132,7 +137,7 @@ void DMXinSetup(int channels)
     if (DMXSerial.getBuffer()) {Serial.print(F("Init in ch:"));Serial.println(channels);} else Serial.println(F("DMXin Buffer alloc err"));
    //DMXSerial.maxChannel(channels);
    DMXSerial.attachOnUpdate(&DMXUpdate);
-
+ #endif
     // this will be called for each packet received
   if (artnet) artnet->setArtDmxCallback(onDmxFrame);
 }

dmx.h

@@ -29,9 +29,24 @@ e-mail    anklimov@gmail.com
 
 //#define DMX_OUT_PIN  3
 
+#if defined(__AVR__)
 #include <DmxSimple.h>
+#endif
+
+#if defined(__ESP__)
+#include <ESP-Dmx.h>
+#endif 
+
+#if defined(__SAM3X8E__)
+#include <DmxSimple.h>
+#endif
+
 #include <Artnet.h>
+
+#if defined(__AVR_ATmega2560__)
 #include <DMXSerial.h>
+#endif
+
 #include "aJSON.h"
 
 extern aJsonObject *dmxArr;

item.cpp

@@ -20,7 +20,18 @@ e-mail    anklimov@gmail.com
 
 #include "item.h"
 #include "aJSON.h"
+#if defined(__AVR__)
 #include <DmxSimple.h>
+#endif
+
+#if defined(__ESP__)
+#include <ESP-Dmx.h>
+#endif 
+
+#if defined(__SAM3X8E__)
+#include <DmxSimple.h>
+#endif
+
 #include "FastLED.h"
 #include <ModbusMaster.h>
 #include <PubSubClient2.h>
@@ -465,12 +476,13 @@ int Item::Ctrl(short cmd, short n, int * Par, boolean send)
         //prescaler = 5 ---> PWM frequency is 30 Hz
         //prescaler = 6 ---> PWM frequency is <20 Hz
         int tval = 7;             // this is 111 in binary and is used as an eraser
+#if defined(__AVR_ATmega2560__)
         TCCR4B &= ~tval;   // this operation (AND plus NOT),  set the three bits in TCCR2B to 0
         TCCR3B &= ~tval; 
         tval=2;
         TCCR4B|=tval;
         TCCR3B|=tval;
-
+#endif
         if (inverse)  k=map(Par[0],100,0,0,255);
                       else k=map(Par[0],0,100,0,255);
         analogWrite(iaddr,k);              
@@ -805,7 +817,7 @@ if (node.getResponseBuffer(0) & 8) //Active fault
        if (result == node.ku8MBSuccess) aJson.addNumberToObject(out,"flt",  (int) node.getResponseBuffer(0));
   }
 
-
+delay(50);
 result = node.readHoldingRegisters(20-1, 4);
   
   // do something with data if read is successful
@@ -844,7 +856,8 @@ result = node.readHoldingRegisters(20-1, 4);
   if (modbusBusy) return -1;
   modbusBusy=1;
   
-  node.begin(9600,SERIAL_8E1,13);
+   node.begin(9600,SERIAL_8E1,13);
+   //node.begin(9600,UARTClass::Mode_8E1,13);
    
   uint8_t   result;
   

lighthub.ino

@@ -62,12 +62,24 @@ dmx relay out
 #include "HTTPClient.h"
 #include <Cmd.h>
 #include "stdarg.h"
+
+#if defined(__AVR__)
 #include <avr/pgmspace.h>
-#include <EEPROM.h>
+#include <avr/wdt.h>
 #include "dmx.h"
+#endif
+
+#if defined(__SAM3X8E__)
+#include <DueFlashStorage.h>
+DueFlashStorage EEPROM;
+#else
+#include <EEPROM.h>
+#endif
+
+
 #include "item.h"
 #include "inputs.h"
-#include <avr/wdt.h>
+#include "dmx.h"
 
 // Hardcoded definitions
 //Thermostate histeresys
@@ -302,7 +314,9 @@ break;
    break; 
  case 2: // IP Ready, Connecting & subscribe
 //Arming Watchdog
+#if defined(__AVR_ATmega2560__)
   wdt_enable(WDTO_8S);
+#endif
   
 if (!client.connected() && mqttArr && (aJson.getArraySize(mqttArr)>1)) {
      char *c=aJson.getArrayItem(mqttArr,1)->valuestring;
@@ -354,7 +368,10 @@ break;
 //if (millis()>mtnCnt)
 {
 //mtnCnt=millis()+2;
+#if defined(__AVR_ATmega2560__)
 wdt_disable();
+#endif
+
 switch (Ethernet.maintain())
   {
     case 1:
@@ -390,7 +407,9 @@ switch (Ethernet.maintain())
       break;
 
   }
+#if defined(__AVR_ATmega2560__)
   wdt_enable(WDTO_8S);
+#endif
   }
 
 return lanStatus;
@@ -655,7 +674,7 @@ void _setConfig(int arg_cnt, char **args)
     return;
 }
   printMACAddress();
-  for (short i=0;i<6;i++) { EEPROM.update(i, mac[i]);}
+  for (short i=0;i<6;i++) { EEPROM.write(i, mac[i]);}
   Serial.println(F("Updated"));
   
 }
@@ -773,14 +792,18 @@ void setup() {
 
 
 void loop(){
+#if defined(__AVR_ATmega2560__)
   wdt_reset();
+#endif
 
  //commandLine.update();
   cmdPoll();
 if (lanLoop() >1) {client.loop();  if (artnet) artnet->read();}
 if (owReady && owArr)      owLoop();
 
+#if defined(__AVR_ATmega2560__)
     unsigned long lastpacket = DMXSerial.noDataSince();
+#endif    
    // if (lastpacket && (lastpacket%10==0)) Serial.println(lastpacket);
 
  DMXCheck();
@@ -793,8 +816,9 @@ if (owReady && owArr)      owLoop();
 // Idle handlers
 void owIdle(void) 
 { if (artnet) artnet->read();
+#if defined(__AVR_ATmega2560__)
   wdt_reset();
-
+#endif
   return;///
   Serial.print("o");
 
@@ -808,8 +832,9 @@ if (lanLoop() == 1) client.loop();
 void modbusIdle(void) 
 {
   //Serial.print("m");
+#if defined(__AVR_ATmega2560__)
     wdt_reset();
-
+#endif
 if (lanLoop() > 1) {client.loop();if (artnet) artnet->read();}
 //if (owReady) owLoop();
  DMXCheck();

owSwitch.h

@@ -19,7 +19,7 @@ e-mail    anklimov@gmail.com
 */
 
 //define APU_OFF
-#include <OneWire.h>
+#include <DS2482_OneWire.h>
 #include <DallasTemperature.h>
 
 

owTerm.h

@@ -52,7 +52,7 @@ e-mail    anklimov@gmail.com
 #define t_max 20 //Maximum number of 1w devices
 #define TEMPERATURE_PRECISION 9
 
-#include <OneWire.h>
+#include <DS2482_OneWire.h>
 #include <DallasTemperature.h>
 #include "aJSON.h"