diff --git a/compiled/due-5100/firmware.bin b/compiled/due-5100/firmware.bin
index 4d7807e..0d77f30 100644
Binary files a/compiled/due-5100/firmware.bin and b/compiled/due-5100/firmware.bin differ
diff --git a/compiled/due-5500/firmware.bin b/compiled/due-5500/firmware.bin
index aab70f8..c5a034e 100644
Binary files a/compiled/due-5500/firmware.bin and b/compiled/due-5500/firmware.bin differ
diff --git a/compiled/due/firmware.bin b/compiled/due/firmware.bin
index 65d17bc..1b8d4e0 100755
Binary files a/compiled/due/firmware.bin and b/compiled/due/firmware.bin differ
diff --git a/compiled/lighthub21/firmware.bin b/compiled/lighthub21/firmware.bin
index 72d86ba..a0edcfe 100644
Binary files a/compiled/lighthub21/firmware.bin and b/compiled/lighthub21/firmware.bin differ
diff --git a/platformio.ini b/platformio.ini
index 1933230..80f5ad8 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -23,15 +23,15 @@ default_envs =
 ;    mega2560-5500
 
 ; LightHub controller HW revision 2.1 and above (Wiznet 5500 CS on pin 53)
-;    lighthub21
+    lighthub21
 
 ; Arduino DUE  + Ethernet shield Wiznet 5100
-;    due-5100
+    due-5100
 
 ; Generic DUE
-;     due
+     due
 ; Arduino DUE + Ethernet shield Wiznet 5500
-;   due-5500
+   due-5500
 
 ; ESP 8266
 ;    esp8266-wifi
@@ -56,6 +56,7 @@ default_envs =
 [env:nrf52840-5500]
 platform = nordicnrf52
 board = nrf52840_dk
+monitor_baud = 115200
 ;board_build.variant = breakout
 ;upload_protocol = mbed
 ;upload_port = /dev/cu.SLAB_USBtoUART
@@ -119,6 +120,7 @@ lib_deps =
 [env:m5stack]
 platform = espressif32
 board = m5stack-core-esp32
+monitor_baud = 115200
 framework = arduino
 upload_speed = 921600
 build_flags = !python get_build_flags.py m5stack
@@ -176,6 +178,7 @@ monitor_filters = esp32_exception_decoder
 build_type = debug
 ;board = pico32
 board = esp32-evb
+monitor_baud = 115200
 upload_speed = 115200
 build_flags = !python get_build_flags.py esp32-wifi
 lib_ignore =
@@ -230,6 +233,7 @@ lib_deps =
 platform = atmelsam
 framework = arduino
 board = due
+monitor_baud = 115200
 build_flags = !python get_build_flags.py due-5100
 lib_ignore =
         ;DS2482_OneWire   //UNCOMMENT for software 1-wire driver
@@ -279,6 +283,7 @@ lib_deps =
 platform = atmelsam
 framework = arduino
 board = due
+monitor_baud = 115200
 build_flags = !python get_build_flags.py due
 ; Need to place arduinoOTA utility from Arduino IDE distribution to folder in your PATH
 ;fix address and password
@@ -332,6 +337,7 @@ lib_deps =
 [env:mega2560slim-5100]
 platform = atmelavr
 board = megaatmega2560
+monitor_baud = 115200
 ;upload_port = net:192.168.88.31:23
 upload_port = net:192.168.88.2:23000
 framework = arduino
@@ -378,6 +384,7 @@ lib_deps =
 [env:mega2560-5500]
 platform = atmelavr
 board = megaatmega2560
+monitor_baud = 115200
 framework = arduino
 build_flags = !python get_build_flags.py mega2560-5500
 lib_ignore =
@@ -424,6 +431,7 @@ lib_deps =
 platform = espressif8266
 framework = arduino
 board = nodemcuv2
+monitor_baud = 115200
 upload_protocol = esptool
 
 ;upload_protocol = espota
@@ -486,6 +494,7 @@ lib_deps =
 [env:mega2560-5100]
 platform = atmelavr
 board = megaatmega2560
+monitor_baud = 115200
 framework = arduino
 upload_port = net:192.168.88.2:23000
 build_flags = !python get_build_flags.py mega2560-5100
@@ -532,6 +541,7 @@ lib_deps =
 platform = atmelsam
 framework = arduino
 board = due
+monitor_baud = 115200
 ;build_flags = !bash check_custom_build_flags_due-5500.sh
 build_flags = !python get_build_flags.py due-5500
 lib_ignore =
@@ -583,6 +593,7 @@ lib_deps =
 platform = atmelsam
 framework = arduino
 board = due
+monitor_baud = 115200
 build_flags = !python get_build_flags.py lighthub21
 ;upload_command = arduinoOTA -address 192.168.11.172 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE
 ;upload_command = arduinoOTA -address 192.168.88.34 -port 65280 -username arduino -password password -b -upload /sketch -sketch $SOURCE
@@ -638,6 +649,7 @@ lib_deps =
 [env:controllino]
 platform = atmelavr
 board = megaatmega2560
+monitor_baud = 115200
 framework = arduino
 build_flags = !python get_build_flags.py controllino
 lib_ignore =
@@ -685,6 +697,7 @@ lib_deps =
 platform = ststm32
 framework = arduino
 board = nucleo_f103rb
+monitor_baud = 115200
 upload_protocol = stlink
 debug_tool = stlink
 build_flags = !python get_build_flags.py stm32-enc2860