pre-rel bins

STM Flash cfg fix
 CAN GROUP chan fix
 CRC16 fix

README.md

@@ -46,6 +46,7 @@ Scalability of Lighthub is virtually unlimited: Setup so many controllers you ne
 * [Russian-language Wiki](https://www.lazyhome.ru/dokuwiki/doku.php)
 * [Compiling and flashing](https://github.com/anklimov/lighthub/wiki/Compiling-and-flashing)
 * [Configuring](https://github.com/anklimov/lighthub/wiki/Configuring)
+* [Browser Plugin for searching and configure controllers](https://github.com/anklimov/zeroconf-lighthub) 
 * [Channel commands](https://github.com/anklimov/lighthub/wiki/Channel-commands)
 * [OpenHab integration](https://github.com/anklimov/lighthub/wiki/OpenHab--integration)
 * [Doxygen developers documentation](https://anklimov.github.io/lighthub/docs/html/index.html)

build-flags/build_flags_esp32-wifi

@@ -1,3 +1,4 @@
+#
 -DWIFI_ENABLE
 -DDMX_DISABLE
 # - exeption in DMX.update/begin
@@ -12,7 +13,7 @@
 -DARDUINO_OTA_MDNS_DISABLE
 -DMDNS_ENABLE 
 #- ArduinoMDNS didnt working
-
+-D CANDRV
 -DMCP23017
 -DMODBUS_TX_PIN=13
 #-DARTNET_ENABLE - udp rx errors ((

build-flags/build_flags_esp8266-wifi

@@ -31,7 +31,7 @@
 #-D TWI_SDA=3
 ##Slimming firmware to fit 50% of 1m flash
 -DDMX_DISABLE
--UDARTNET_ENABLE
+-UARTNET_ENABLE
 -DMODBUS_DISABLE
 -DMBUS_DISABLE
 -DOWIRE_DISABLE
@@ -43,4 +43,7 @@
 -UMCP23017
 -D BEARSSL_SSL_BASIC
 -D SPILED_DISABLE 
--D PWM_DISABLE
+-D PWM_DISABLE
+
+# WAK for HDC1080 (pin D3 on wemos is IO0)
+-D WAK_PIN=D3

build-flags/build_flags_lighthub21

@@ -39,4 +39,5 @@
 -D CORS=\"*\"
 -D REDIRECTION_URL=\"http://lazyhome.ru/pwa\"
 -D MERCURY_ENABLE
-#-D IPMODBUS
+#-D IPMODBUS
+-D CONFIG_CLEAN_PIN=2

build-flags/build_flags_stm32-noip

@@ -0,0 +1,48 @@
+-DNOIP
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+-DMBUS_DISABLE
+-DOWIRE_DISABLE
+-DDHT_DISABLE
+-DCOUNTER_DISABLE
+-DNO_HOMIE
+-DCSSHDC_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE
+-DPID_DISABLE
+-DMULTIVENT_DISABLE
+-DMOTOR_DISABLE
+
+-D CANDRV
+-D THERMOSTAT_CHECK_PERIOD=5000
+-D ULTRASONIC
+
+
+-DENABLE_HWSERIAL1
+-DdebugSerialPort=Serial1
+
+#-DFLASH_BASE_ADDRESS
+#-DFLASH_DATA_SECTOR 
+#-DFLASH_PAGE_NUMBER 
+
+#  -D PIO_FRAMEWORK_ARDUINO_ENABLE_MASS_STORAGE
+#  -D PIO_FRAMEWORK_ARDUINO_ENABLE_CDC_AND_MSC
+
+#-DdebugSerialPort=SerialUSB
+#-DSerialPortType=USBSerial
+#-DSERIAL_BAUD=0
+
+#-DPIO_FRAMEWORK_ARDUINO_ENABLE_CDC
+#-DUSBCON
+#-DUSBD_VID=0x0483
+#-DUSBD_PID=0x5740
+#-DUSB_MANUFACTURER="Unknown"
+#-DUSB_PRODUCT="\"BLUEPILL_F103C8\""
+#-DHAL_PCD_MODULE_ENABLED
+#-D USBD_USE_CDC
+
+-D HAL_CAN_MODULE_ENABLED
+#HAL_ETH_MODULE_DISABLED
+#HAL_SD_MODULE_DISABLED
+#HAL_DAC_MODULE_DISABLED
+#-DMERCURY_ENABLE

compiled/DUE_16u2_reflash/16u2-italiano.hex

@@ -0,0 +1,513 @@
+:20000000A7C00000C0C00000BEC00000BCC00000BAC00000B8C00000B6C00000B4C0000023
+:20002000B2C00000B0C00000AEC00000B8C400007CC40000A8C00000A6C00000A4C0000082
+:20004000A2C00000A0C000009EC000009CC000009AC0000098C0000096C0000021C100003A
+:2000600092C0000090C000008EC000008CC000008AC0000088C0000086C0000084C0000028
+:2000800082C0000080C000007EC000007CC000007AC0000078C000001201100102000008C4
+:2000A00041233D0001000102DC0109023E00020100C0320904000001020201000524000143
+:2000C00010042402060524060001070582030800FF09040100020A000000070504024000AC
+:2000E0000107058302400001040309043203410072006400750069006E006F0020002800CA
+:200100007700770077002E00610072006400750069006E006F002E0063006300290000003D
+:200120002E03410072006400750069006E006F0020004400750065002000500072006F002D
+:2001400067002E00200050006F0072007400000011241FBECFEFD2E0DEBFCDBF11E0A0E029
+:20016000B1E0E2ECF0E102C005900D92A831B107D9F712E0A8E1B1E001C01D92A833B107E9
+:20018000E1F722D19CC73CCF9C01DC01AE57BF4FED91FC91119741911196FC93EE93805885
+:2001A0009F4FE817F90711F42D933C939FB7F894F901EC57FF4F8081815080839FBF842F6B
+:2001C0000895882311F03F9A01C03F9847980895882311F046980895469A0895DF92EF9253
+:2001E000FF920F931F93FC018489813019F0823019F404C010E303C010E001C010E283896E
+:20020000823009F418608589873031F0883031F0863029F4126003C0146001C016601092A3
+:20022000C9001092C8001092CA000785F088E188D288202F3F2D4E2D5D2D10921E01203B7C
+:2002400084E0380780E0480780E0580719F481E080931E01CA01B90122E030E040E050E006
+:2002600013D720583B47414E5F4FCA01B901202F3F2D4E2D5D2DE6D6215030403093CD00EB
+:200280002093CC001093CA0082E08093C80088E98093C9001F910F91FF90EF90DF9008957E
+:2002A0001F920F920FB60F9211242F938F939F93EF93FF939091CE008EB38430F1F4E091ED
+:2002C000A201F091A3019083E091A201F091A301CF0101969093A3018093A201825A914079
+:2002E00021F482E291E0928381839FB7F8948091A6018F5F8093A6019FBFFF91EF919F911B
+:200300008F912F910F900FBE0F901F901895FC0140911A0140931B0180911C0180931D015F
+:200320008585282F30E02170307020931A01858590E096958795817080931C0180911E013B
+:20034000882339F088E790E090931901809318010895442341F4222331F082E390E09093EA
+:20036000190180931801089580E091E001C680E091E0B4C51F9384B7877F84BF18E10FB6C4
+:20038000F89410936000109260000FBE80E019DF469A3E9A87E690E09093CD008093CC0043
+:2003A00086E08093CA001092C8001093C900539A5A9A8AB180638AB98BB180638BB9AAD203
+:2003C00084E085BD1F9108950F931F93CF93DF93D1DF2FB7F89487EA91E09093280280939E
+:2003E000270290932A02809329022FBF2FB7F89482E291E09093A3018093A2019093A501CC
+:200400008093A4012FBF7894C7EAD1E003E08FB7F89490912B028FBF903809F180E091E0E4
+:20042000D3D497FD1CC0E0912702F09128028083E0912702F0912802CF0101969093280264
+:20044000809327028752924011F4D283C1839FB7F89480912B028F5F80932B029FBF8FB725
+:20046000F8941091A6018FBFA89903C0113608F456C0A89A8091A601882361F05D9800937F
+:200480001F0108C082E291E07FDE682F80E091E001D511501123B1F780911F01882351F0AA
+:2004A00080911F01815080931F0180911F01882309F45D9A80912001882351F080912001E7
+:2004C00081508093200180912001882309F45C9A809118019091190118161906E4F4CC975A
+:2004E000CD9710F481E001C080E072DE80911801909119010197C29710F481E001C080E0E6
+:2005000060DE80911801909119010197909319018093180104C080E05BDE80E052DE8FB704
+:20052000F89490912B028FBF992369F087EA91E02BDE982F8091C80085FFFCCF9093CE00B3
+:200540005C980093200180E091E095D42AD45FCFDA01923049F0933061F09130F9F4E8E924
+:20056000F0E022E130E01EC0EAEAF0E02EE330E019C0813049F0813018F0823079F408C092
+:20058000E8EEF0E0849107C0ECEEF0E0849103C0E0E2F1E08491282F30E004C0E0E0F0E0F4
+:2005A00020E030E0ED93FC93C901089528E030E040E003C04F5F220F331F28173907D0F347
+:2005C000842F8295807F08958093E9008091EB0081608093EB001092ED006093EC0040939D
+:2005E000ED008091EE00881F8827881F08951092F40090E09093E9001092F0001092E80047
+:200600001092ED008091EB008E7F8093EB009F5F953081F708958091300288238CF403C03B
+:200620008EB38823B1F08091E80082FFF9CF8091E8008B778093E80008958EB3882349F033
+:200640008091E80080FFF9CF8091E8008E778093E800089594E68091EC0080FF05C08091F8
+:20066000E80080FF05C023C08091E80082FD1FC08EB3882311F482E008958EB3853011F429
+:2006800083E008958091EB0085FF02C081E008958091E10082FFDFCF8091E1008B7F8093EA
+:2006A000E100992311F484E008959150D4CF80E008959C014091360250913702461757079B
+:2006C00018F4F90120E038C06115710511F0AB01F8CF8091E8008E778093E80040E050E073
+:2006E000F0CF8091E80083FF02C081E008958091E80082FD2DC08EB3882381F18EB3853047
+:2007000079F18091E80080FF17C09091F20006C081918093F100415050409F5F4115510566
+:2007200011F09830A8F320E0983009F421E08091E8008E778093E8004115510591F622231E
+:2007400081F606C08EB3882349F08EB3853041F08091E80082FFF6CF80E0089582E00895D5
+:2007600083E008959C0140913602509137024617570710F490E03BC06115710511F0AB01F6
+:20078000F9CF8091E8008E778093E80040E050E0F1CF8091E80083FF02C081E0089580913C
+:2007A000E80082FD30C08EB3882399F18EB3853091F18091E80080FF1AC08091F20009C0D6
+:2007C000F9012F5F3F4FE491E093F100415050408F5F4115510511F0883090F390E088300B
+:2007E00009F491E08091E8008E778093E8004115510579F6992369F606C08EB3882349F071
+:200800008EB3853041F08091E80082FFF6CF80E0089582E0089583E008959C0161157105ED
+:2008200029F48091E8008B778093E800F90120C08091E80083FF02C081E008958EB38823A4
+:2008400039F18EB3853031F18091E80082FFF0CF06C08091F10081936150704021F08091BE
+:20086000F2008823B1F78091E8008B778093E80061157105E9F606C08EB3882349F08EB346
+:20088000853041F08091E80080FFF6CF80E0089582E0089583E0089542D044D01EBA109299
+:2008A0002E0210922D0210922C0284E089BD89B5826089BD09B400FEFDCF8091D800982F20
+:2008C0009F779093D80080688093D800809163008E7F809363008091D8008F7D8093D8005D
+:2008E0008091E0008E7F8093E0008091E1008E7F8093E1008091E20081608093E20080913A
+:20090000E100877F8093E1008091E20088608093E2000895C1DF81E080932F02089510920B
+:20092000E20008951092E10008951F920F920FB60F9211241F932F933F934F935F936F930F
+:200940007F938F939F93AF93BF93EF93FF93E9EEF0E0108117701082E0EFF0E08081877F92
+:2009600080837894C3D0F894A9EEB0E01C92E0EFF0E08081886080831C93FF91EF91BF91DA
+:20098000AF919F918F917F916F915F914F913F912F911F910F900FBE0F901F9018951F928F
+:2009A0000F920FB60F9211242F933F934F935F936F937F938F939F93AF93BF93EF93FF9383
+:2009C0008091E10080FF1BC08091E20080FF17C08091E1008E7F8093E1008091E2008E7F8F
+:2009E0008093E2008091E20080618093E2008091D80080628093D80019BC1EBAD1D1809123
+:200A0000E10084FF29C08091E20084FF25C084E089BD89B5826089BD09B400FEFDCF809186
+:200A2000D8008F7D8093D8008091E1008F7E8093E1008091E2008F7E8093E2008091E2000C
+:200A400081608093E20080912E02882311F481E001C084E08EBBA4D18091E10083FF27C030
+:200A60008091E20083FF23C08091E100877F8093E10082E08EBB10922E028091E1008E7FB6
+:200A80008093E1008091E2008E7F8093E2008091E20080618093E200AADD80E060E042E05B
+:200AA00093DD8091F00088608093F00079D18091E10082FF0AC08091E20082FF06C0809108
+:200AC000E1008B7F8093E1006BD1FF91EF91BF91AF919F918F917F916F915F914F913F915B
+:200AE0002F910F900FBE0F901F9018951F93DF93CF93CDB7DEB7AC970FB6F894DEBF0FBE32
+:200B0000CDBFE0E3F2E08091F100819322E0E833F207C9F78091300230913102353009F42F
+:200B200087C0363040F43130C9F1313070F0333009F01DC133C0383009F4EFC0393009F451
+:200B4000FEC0363009F013C192C0803821F0823809F00DC108C090912C0280912D02882306
+:200B600099F0926011C08091340287708093E9008091EB0090E025E0969587952A95E1F7A0
+:200B8000982F91701092E9008091E800877F8093E8009093F1001092F100CAC0882319F023
+:200BA000823009F0E4C090E08F719070009721F0029709F0DDC00CC080913202813009F0E4
+:200BC000D7C010922D02333069F580932D022AC080913202882331F520913402277009F42F
+:200BE000C7C02093E9008091EB0080FFC1C0333021F48091EB00806213C08091EB008061D0
+:200C00008093EB0081E090E002C0880F991F2A95E2F78093EA001092EA008091EB008860EF
+:200C20008093EB001092E9008091E800877F83C0882309F09CC0109132028091E800877F15
+:200C40008093E800E8DC04C08EB3882309F490C08091E80080FFF8CF812F8F7711F492E06C
+:200C600001C093E09EBB80688093E30081C08058823008F07CC0809132029091330223E06C
+:200C80008C3D920799F55FB7F894DE0115964EE020E030E061E2E42FF0E060935700849175
+:200CA00020FF03C082958F704F5F982F9F70892F805D8A3308F0895F8C9311961C9211976A
+:200CC0002F5F3F4F12962431310529F75FBF8AE28B8383E08C838091E800877F8093E800A1
+:200CE000CE0103966AE270E0E4DC11C060913402AE014F5F5F4F2CDCBC010097C9F1809106
+:200D0000E800877F8093E80089819A812BDD8091E8008B778093E8002BC0803841F58091DD
+:200D2000E800877F8093E80080912E028093F1008091E8008E778093E8006DDC19C08823BF
+:200D4000B1F490913202923098F48091E800877F8093E80090932E025EDC80912E028823D8
+:200D600011F483E001C084E08EBB01DB01C0FCDA8091E80083FF0AC08091EB0080628093F4
+:200D8000EB008091E800877F8093E800AC960FB6F894DEBF0FBECDBFCF91DF911F910895C8
+:200DA00008951F938EB3882361F01091E9001092E9008091E80083FF01C098DE17701093B6
+:200DC000E9001F9108950895FC018EB3843021F587859089A189B2890097A105B105E1F0EA
+:200DE00085818093E9008091E80082FF15C08091F200882319F42FEF3FEF04C08091F100D5
+:200E0000282F30E08091F200882341F48091E8008B778093E80002C02FEF3FEFC90108951D
+:200E2000FC018EB3843011F587859089A189B2890097A105B105D1F081818093E90080916D
+:200E4000F2008823A9F09091E8008091E8008E778093E80095FD0CC0FDDB982F882349F475
+:200E60008091E8008E778093E80003C092E001C090E0892F0895FC018EB3843051F487857B
+:200E80009089A189B2890097A105B10511F0CF01C7CF08951F93FC01162F8EB38430D9F427
+:200EA00087859089A189B2890097A105B10599F081818093E9008091E80085FD08C08091DA
+:200EC000E8008E778093E800C5DB882329F41093F10080E001C082E01F9108950F931F930A
+:200EE000CF93DF93EC010D96FC0189E0DF011D928A95E9F72A813B8109818C81882311F4EC
+:200F000010E001C014E0C90151DB182B1260802F61E8412F59DB882329F12E813F810D8123
+:200F20008885882311F410E001C014E0C9013EDB182B1260802F60E8412F46DB882391F003
+:200F40002A853B8509858C85882311F410E001C014E0C9012BDB182B1260802F61EC412F3D
+:200F600033DB01C080E0DF91CF911F910F910895CF93DF93EC018091E80083FF60C0888120
+:200F800090E020913402309135022817390709F056C080913102813261F0823220F48032B2
+:200FA00009F04DC019C0823269F1833209F047C038C080913002813A09F041C08091E800A6
+:200FC000877F8093E800CE010F9667E070E071DB8091E8008B7713C080913002813279F587
+:200FE0008091E800877F8093E800CE010F9667E070E013DCCE01F2D88091E8008E77809353
+:20100000E8001DC0809130028132C9F48091E800877F8093E800809132028D87CE0177D9E6
+:201020000DC080913002813251F48091E800877F8093E800CE0160913202C5DEECDADF91E1
+:20104000CF910895A1E21A2EAA1BBB1BFD010DC0AA1FBB1FEE1FFF1FA217B307E407F5073A
+:2010600020F0A21BB30BE40BF50B661F771F881F991F1A9469F760957095809590959B019E
+:20108000AC01BD01CF01089597FB092E05260ED057FD04D0D7DF0AD0001C38F450954095EC
+:2010A000309521953F4F4F4F5F4F0895F6F790958095709561957F4F8F4F9F4F0895F89459
+:2010C000FFCF000340000004400000020800000000000000000000001400FFFFFFFFFFFFA3
+:2010E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10
+:20110000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEF
+:20112000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCF
+:20114000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAF
+:20116000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8F
+:20118000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6F
+:2011A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4F
+:2011C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2F
+:2011E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0F
+:20120000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEE
+:20122000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCE
+:20124000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAE
+:20126000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8E
+:20128000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6E
+:2012A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4E
+:2012C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2E
+:2012E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0E
+:20130000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED
+:20132000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:20134000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:20136000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D
+:20138000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D
+:2013A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D
+:2013C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D
+:2013E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D
+:20140000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC
+:20142000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC
+:20144000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC
+:20146000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:20148000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:2014A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C
+:2014C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C
+:2014E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C
+:20150000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB
+:20152000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB
+:20154000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB
+:20156000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B
+:20158000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B
+:2015A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B
+:2015C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B
+:2015E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B
+:20160000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA
+:20162000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA
+:20164000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA
+:20166000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A
+:20168000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A
+:2016A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A
+:2016C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A
+:2016E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A
+:20170000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9
+:20172000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9
+:20174000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9
+:20176000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89
+:20178000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69
+:2017A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49
+:2017C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29
+:2017E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
+:20180000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8
+:20182000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8
+:20184000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:20186000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88
+:20188000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:2018A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48
+:2018C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28
+:2018E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08
+:20190000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:20192000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:20194000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:20196000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:20198000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:2019A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:2019C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27
+:2019E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:201A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6
+:201A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6
+:201A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6
+:201A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86
+:201A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:201AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46
+:201AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26
+:201AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06
+:201B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
+:201B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
+:201B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5
+:201B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85
+:201B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65
+:201BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
+:201BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:201BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:201C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4
+:201C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4
+:201C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4
+:201C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
+:201C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
+:201CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
+:201CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24
+:201CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04
+:201D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3
+:201D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3
+:201D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3
+:201D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83
+:201D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63
+:201DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43
+:201DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23
+:201DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03
+:201E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
+:201E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
+:201E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2
+:201E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82
+:201E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62
+:201EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
+:201EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:201EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:201F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1
+:201F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1
+:201F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1
+:201F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81
+:201F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61
+:201FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41
+:201FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21
+:201FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01
+:20200000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0
+:20202000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC0
+:20204000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA0
+:20206000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80
+:20208000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF60
+:2020A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
+:2020C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20
+:2020E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00
+:20210000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDF
+:20212000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBF
+:20214000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9F
+:20216000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7F
+:20218000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5F
+:2021A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3F
+:2021C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1F
+:2021E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
+:20220000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDE
+:20222000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBE
+:20224000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9E
+:20226000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7E
+:20228000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5E
+:2022A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3E
+:2022C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1E
+:2022E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE
+:20230000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDD
+:20232000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
+:20234000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9D
+:20236000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7D
+:20238000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D
+:2023A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3D
+:2023C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1D
+:2023E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD
+:20240000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDC
+:20242000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBC
+:20244000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C
+:20246000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C
+:20248000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5C
+:2024A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3C
+:2024C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1C
+:2024E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC
+:20250000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDB
+:20252000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBB
+:20254000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9B
+:20256000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7B
+:20258000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5B
+:2025A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3B
+:2025C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1B
+:2025E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB
+:20260000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDA
+:20262000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBA
+:20264000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9A
+:20266000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7A
+:20268000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5A
+:2026A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3A
+:2026C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1A
+:2026E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA
+:20270000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD9
+:20272000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB9
+:20274000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF99
+:20276000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF79
+:20278000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF59
+:2027A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF39
+:2027C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF19
+:2027E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9
+:20280000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD8
+:20282000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB8
+:20284000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF98
+:20286000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF78
+:20288000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
+:2028A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF38
+:2028C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF18
+:2028E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8
+:20290000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7
+:20292000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7
+:20294000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
+:20296000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
+:20298000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
+:2029A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
+:2029C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17
+:2029E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7
+:202A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD6
+:202A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB6
+:202A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF96
+:202A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF76
+:202A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF56
+:202AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF36
+:202AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF16
+:202AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6
+:202B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5
+:202B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB5
+:202B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF95
+:202B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF75
+:202B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55
+:202BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35
+:202BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
+:202BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
+:202C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD4
+:202C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB4
+:202C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF94
+:202C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74
+:202C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54
+:202CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34
+:202CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF14
+:202CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4
+:202D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD3
+:202D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB3
+:202D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF93
+:202D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF73
+:202D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF53
+:202DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF33
+:202DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF13
+:202DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3
+:202E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2
+:202E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB2
+:202E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF92
+:202E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF72
+:202E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52
+:202EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32
+:202EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
+:202EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
+:202F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD1
+:202F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB1
+:202F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF91
+:202F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF71
+:202F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF51
+:202FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF31
+:202FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF11
+:202FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1
+:20300000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD0
+:20302000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0
+:20304000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF90
+:20306000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF70
+:20308000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50
+:2030A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30
+:2030C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10
+:2030E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0
+:20310000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCF
+:20312000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAF
+:20314000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8F
+:20316000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6F
+:20318000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4F
+:2031A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2F
+:2031C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0F
+:2031E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEF
+:20320000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCE
+:20322000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAE
+:20324000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8E
+:20326000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6E
+:20328000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4E
+:2032A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2E
+:2032C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0E
+:2032E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEE
+:20330000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:20332000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:20334000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D
+:20336000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D
+:20338000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D
+:2033A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D
+:2033C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D
+:2033E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED
+:20340000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC
+:20342000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC
+:20344000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:20346000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:20348000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C
+:2034A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C
+:2034C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C
+:2034E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC
+:20350000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB
+:20352000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB
+:20354000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B
+:20356000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B
+:20358000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B
+:2035A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B
+:2035C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B
+:2035E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB
+:20360000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA
+:20362000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA
+:20364000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A
+:20366000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A
+:20368000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A
+:2036A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A
+:2036C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A
+:2036E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA
+:20370000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9
+:20372000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9
+:20374000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89
+:20376000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69
+:20378000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49
+:2037A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29
+:2037C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
+:2037E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9
+:20380000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8
+:20382000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:20384000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88
+:20386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:20388000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48
+:2038A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28
+:2038C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08
+:2038E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8
+:20390000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:20392000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:20394000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:20396000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:20398000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:2039A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27
+:2039C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:2039E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:203A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6
+:203A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6
+:203A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86
+:203A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:203A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46
+:203AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26
+:203AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06
+:203AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6
+:203B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
+:203B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5
+:203B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85
+:203B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65
+:203B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
+:203BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:203BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:203BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
+:203C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4
+:203C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4
+:203C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
+:203C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
+:203C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
+:203CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24
+:203CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04
+:203CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4
+:203D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3
+:203D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3
+:203D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83
+:203D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63
+:203D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43
+:203DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23
+:203DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03
+:203DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3
+:203E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
+:203E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2
+:203E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82
+:203E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62
+:203E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
+:203EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:203EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:203EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
+:203F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1
+:203F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1
+:203F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81
+:203F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61
+:203F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41
+:203FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21
+:203FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01
+:203FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1
+:00000001FF

compiled/DUE_16u2_reflash/16u2-out.hex

@@ -1,137 +0,0 @@
-:20000000A7C00000C0C00000BEC00000BCC00000BAC00000B8C00000B6C00000B4C0000023
-:20002000B2C00000B0C00000AEC00000C1C4000085C40000A8C00000A6C00000A4C0000070
-:20004000A2C00000A0C000009EC000009CC000009AC0000098C0000096C0000021C100003A
-:2000600092C0000090C000008EC000008CC000008AC0000088C0000086C0000084C0000028
-:2000800082C0000080C000007EC000007CC000007AC0000078C000001201100102000008C4
-:2000A00041233D0001000102DC0109023E00020100C0320904000001020201000524000143
-:2000C00010042402060524060001070582030800FF09040100020A000000070504024000AC
-:2000E0000107058302400001040309043203410072006400750069006E006F0020002800CA
-:200100007700770077002E00610072006400750069006E006F002E0063006300290000003D
-:200120002E03410072006400750069006E006F0020004400750065002000500072006F002D
-:2001400067002E00200050006F0072007400000011241FBECFEFD2E0DEBFCDBF11E0A0E029
-:20016000B1E0E4EDF0E102C005900D92A831B107D9F712E0A8E1B1E001C01D92A833B107E6
-:20018000E1F72BD1A5C73CCF9C01DC01AE57BF4FED91FC91119741911196FC93EE93805873
-:2001A0009F4FE817F90711F42D933C939FB7F894F901EC57FF4F8081815080839FBF842F6B
-:2001C0000895882311F03F9A01C03F9847980895882311F046980895469A0895DF92EF9253
-:2001E000FF920F931F93FC018489813019F0823019F404C010E303C010E001C010E283896E
-:20020000823009F418608589873031F0883031F0863029F4126003C0146001C016601092A3
-:20022000C9001092C8001092CA000785F088E188D288202F3F2D4E2D5D2D10921E01203B7C
-:2002400084E0380780E0480780E0580719F481E080931E01CA01B90122E030E040E050E006
-:200260001CD720583B47414E5F4FCA01B901202F3F2D4E2D5D2DEFD6215030403093CD00D9
-:200280002093CC001093CA0082E08093C80088E98093C9001F910F91FF90EF90DF9008957E
-:2002A0001F920F920FB60F9211242F938F939F93EF93FF939091CE008EB38430F1F4E091ED
-:2002C000A201F091A3019083E091A201F091A301CF0101969093A3018093A201825A914079
-:2002E00021F482E291E0928381839FB7F8948091A6018F5F8093A6019FBFFF91EF919F911B
-:200300008F912F910F900FBE0F901F901895FC0140911A0140931B0180911C0180931D015F
-:200320008585282F30E02170307020931A01858590E096958795817080931C0180911E013B
-:20034000882339F088E790E090931901809318010895442341F4222331F082E390E09093EA
-:20036000190180931801089580E091E00AC680E091E0BDC584B7877F84BF88E10FB6F89468
-:2003800080936000109260000FBE81E01ADF16BC83E085BD86B58831E8F315BC16BC80E078
-:2003A00010DF469A3E9A87E690E09093CD008093CC0086E08093CA001092C80088E18093C1
-:2003C000C900539A5A9A8AB180638AB98BB180638BB9A9D284E085BD08950F931F93CF933B
-:2003E000DF93C8DF2FB7F89487EA91E0909328028093270290932A02809329022FBF2FB7A6
-:20040000F89482E291E09093A3018093A2019093A5018093A4012FBF7894C7EAD1E003E03E
-:200420008FB7F89490912B028FBF903809F180E091E0D3D497FD1CC0E0912702F09128025F
-:200440008083E0912702F0912802CF01019690932802809327028752924011F4D283C1831B
-:200460009FB7F89480912B028F5F80932B029FBF8FB7F8941091A6018FBFA89903C011361D
-:2004800008F456C0A89A8091A601882361F05D9800931F0108C082E291E076DE682F80E0C4
-:2004A00091E001D511501123B1F780911F01882351F080911F01815080931F0180911F0135
-:2004C000882309F45D9A80912001882351F08091200181508093200180912001882309F44E
-:2004E0005C9A809118019091190118161906E4F4CC97CD9710F481E001C080E069DE8091D7
-:200500001801909119010197C29710F481E001C080E057DE809118019091190101979093BB
-:2005200019018093180104C080E052DE80E049DE8FB7F89490912B028FBF992369F087EAA6
-:2005400091E022DE982F8091C80085FFFCCF9093CE005C980093200180E091E095D42AD46A
-:200560005FCFDA01923049F0933061F09130F9F4E8E9F0E022E130E01EC0EAEAF0E02EE36E
-:2005800030E019C0813049F0813018F0823079F408C0E8EEF0E0849107C0ECEEF0E08491A7
-:2005A00003C0E0E2F1E08491282F30E004C0E0E0F0E020E030E0ED93FC93C901089528E087
-:2005C00030E040E003C04F5F220F331F28173907D0F3842F8295807F08958093E900809142
-:2005E000EB0081608093EB001092ED006093EC004093ED008091EE00881F8827881F08956A
-:200600001092F40090E09093E9001092F0001092E8001092ED008091EB008E7F8093EB0016
-:200620009F5F953081F708958091300288238CF403C08EB38823B1F08091E80082FFF9CFE2
-:200640008091E8008B778093E80008958EB3882349F08091E80080FFF9CF8091E8008E77A4
-:200660008093E800089594E68091EC0080FF05C08091E80080FF05C023C08091E80082FD8F
-:200680001FC08EB3882311F482E008958EB3853011F483E008958091EB0085FF02C081E0ED
-:2006A00008958091E10082FFDFCF8091E1008B7F8093E100992311F484E008959150D4CF46
-:2006C00080E008959C0140913602509137024617570718F4F90120E038C06115710511F0B7
-:2006E000AB01F8CF8091E8008E778093E80040E050E0F0CF8091E80083FF02C081E0089544
-:200700008091E80082FD2DC08EB3882381F18EB3853079F18091E80080FF17C09091F20054
-:2007200006C081918093F100415050409F5F4115510511F09830A8F320E0983009F421E0E8
-:200740008091E8008E778093E8004115510591F6222381F606C08EB3882349F08EB38530D0
-:2007600041F08091E80082FFF6CF80E0089582E0089583E008959C0140913602509137024D
-:200780004617570710F490E03BC06115710511F0AB01F9CF8091E8008E778093E80040E0B5
-:2007A00050E0F1CF8091E80083FF02C081E008958091E80082FD30C08EB3882399F18EB3EF
-:2007C000853091F18091E80080FF1AC08091F20009C0F9012F5F3F4FE491E093F100415044
-:2007E00050408F5F4115510511F0883090F390E0883009F491E08091E8008E778093E80004
-:200800004115510579F6992369F606C08EB3882349F08EB3853041F08091E80082FFF6CF51
-:2008200080E0089582E0089583E008959C016115710529F48091E8008B778093E800F90126
-:2008400020C08091E80083FF02C081E008958EB3882339F18EB3853031F18091E80082FFD5
-:20086000F0CF06C08091F10081936150704021F08091F2008823B1F78091E8008B77809307
-:20088000E80061157105E9F606C08EB3882349F08EB3853041F08091E80080FFF6CF80E0F6
-:2008A000089582E0089583E0089542D044D01EBA10922E0210922D0210922C0284E089BD81
-:2008C00089B5826089BD09B400FEFDCF8091D800982F9F779093D80080688093D800809186
-:2008E00063008E7F809363008091D8008F7D8093D8008091E0008E7F8093E0008091E1004F
-:200900008E7F8093E1008091E20081608093E2008091E100877F8093E1008091E200886046
-:200920008093E2000895C1DF81E080932F0208951092E20008951092E10008951F920F92B0
-:200940000FB60F9211241F932F933F934F935F936F937F938F939F93AF93BF93EF93FF93D2
-:20096000E9EEF0E0108117701082E0EFF0E08081877F80837894C3D0F894A9EEB0E01C927D
-:20098000E0EFF0E08081886080831C93FF91EF91BF91AF919F918F917F916F915F914F914D
-:2009A0003F912F911F910F900FBE0F901F9018951F920F920FB60F9211242F933F934F932D
-:2009C0005F936F937F938F939F93AF93BF93EF93FF938091E10080FF1BC08091E20080FF57
-:2009E00017C08091E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E2006F
-:200A00008091D80080628093D80019BC1EBAD1D18091E10084FF29C08091E20084FF25C018
-:200A200084E089BD89B5826089BD09B400FEFDCF8091D8008F7D8093D8008091E1008F7E40
-:200A40008093E1008091E2008F7E8093E2008091E20081608093E20080912E02882311F4F3
-:200A600081E001C084E08EBBA4D18091E10083FF27C08091E20083FF23C08091E100877F87
-:200A80008093E10082E08EBB10922E028091E1008E7F8093E1008091E2008E7F8093E200FD
-:200AA0008091E20080618093E200AADD80E060E042E093DD8091F00088608093F00079D17E
-:200AC0008091E10082FF0AC08091E20082FF06C08091E1008B7F8093E1006BD1FF91EF9163
-:200AE000BF91AF919F918F917F916F915F914F913F912F910F900FBE0F901F9018951F938D
-:200B0000DF93CF93CDB7DEB7AC970FB6F894DEBF0FBECDBFE0E3F2E08091F100819322E0B1
-:200B2000E833F207C9F78091300230913102353009F487C0363040F43130C9F1313070F08B
-:200B4000333009F01DC133C0383009F4EFC0393009F4FEC0363009F013C192C0803821F0E2
-:200B6000823809F00DC108C090912C0280912D02882399F0926011C0809134028770809355
-:200B8000E9008091EB0090E025E0969587952A95E1F7982F91701092E9008091E800877FCB
-:200BA0008093E8009093F1001092F100CAC0882319F0823009F0E4C090E08F7190700097FF
-:200BC00021F0029709F0DDC00CC080913202813009F0D7C010922D02333069F580932D02AF
-:200BE0002AC080913202882331F520913402277009F4C7C02093E9008091EB0080FFC1C05B
-:200C0000333021F48091EB00806213C08091EB0080618093EB0081E090E002C0880F991FEE
-:200C20002A95E2F78093EA001092EA008091EB0088608093EB001092E9008091E800877F27
-:200C400083C0882309F09CC0109132028091E800877F8093E800E8DC04C08EB3882309F411
-:200C600090C08091E80080FFF8CF812F8F7711F492E001C093E09EBB80688093E30081C00C
-:200C80008058823008F07CC0809132029091330223E08C3D920799F55FB7F894DE011596DC
-:200CA0004EE020E030E061E2E42FF0E060935700849120FF03C082958F704F5F982F9F70F5
-:200CC000892F805D8A3308F0895F8C9311961C9211972F5F3F4F12962431310529F75FBF39
-:200CE0008AE28B8383E08C838091E800877F8093E800CE0103966AE270E0E4DC11C0609188
-:200D00003402AE014F5F5F4F2CDCBC010097C9F18091E800877F8093E80089819A812BDD55
-:200D20008091E8008B778093E8002BC0803841F58091E800877F8093E80080912E02809396
-:200D4000F1008091E8008E778093E8006DDC19C08823B1F490913202923098F48091E8009B
-:200D6000877F8093E80090932E025EDC80912E02882311F483E001C084E08EBBF8DA01C090
-:200D8000F3DA8091E80083FF0AC08091EB0080628093EB008091E800877F8093E800AC9629
-:200DA0000FB6F894DEBF0FBECDBFCF91DF911F91089508951F938EB3882361F01091E900B9
-:200DC0001092E9008091E80083FF01C098DE17701093E9001F9108950895FC018EB38430E7
-:200DE00021F587859089A189B2890097A105B105E1F085818093E9008091E80082FF15C03E
-:200E00008091F200882319F42FEF3FEF04C08091F100282F30E08091F200882341F48091AA
-:200E2000E8008B778093E80002C02FEF3FEFC9010895FC018EB3843011F587859089A18911
-:200E4000B2890097A105B105D1F081818093E9008091F2008823A9F09091E8008091E8005C
-:200E60008E778093E80095FD0CC0FDDB982F882349F48091E8008E778093E80003C092E05F
-:200E800001C090E0892F0895FC018EB3843051F487859089A189B2890097A105B10511F017
-:200EA000CF01C7CF08951F93FC01162F8EB38430D9F487859089A189B2890097A105B105FC
-:200EC00099F081818093E9008091E80085FD08C08091E8008E778093E800C5DB882329F4E7
-:200EE0001093F10080E001C082E01F9108950F931F93CF93DF93EC010D96FC0189E0DF0190
-:200F00001D928A95E9F72A813B8109818C81882311F410E001C014E0C90151DB182B126025
-:200F2000802F61E8412F59DB882329F12E813F810D818885882311F410E001C014E0C90127
-:200F40003EDB182B1260802F60E8412F46DB882391F02A853B8509858C85882311F410E061
-:200F600001C014E0C9012BDB182B1260802F61EC412F33DB01C080E0DF91CF911F910F917C
-:200F80000895CF93DF93EC018091E80083FF60C0888190E020913402309135022817390781
-:200FA00009F056C080913102813261F0823220F4803209F04DC019C0823269F1833209F0C5
-:200FC00047C038C080913002813A09F041C08091E800877F8093E800CE010F9667E070E015
-:200FE00071DB8091E8008B7713C080913002813279F58091E800877F8093E800CE010F9605
-:2010000067E070E013DCCE01E9D88091E8008E778093E8001DC0809130028132C9F4809120
-:20102000E800877F8093E800809132028D87CE016ED90DC080913002813251F48091E80057
-:20104000877F8093E800CE0160913202C5DEECDADF91CF910895A1E21A2EAA1BBB1BFD0161
-:201060000DC0AA1FBB1FEE1FFF1FA217B307E407F50720F0A21BB30BE40BF50B661F771FE6
-:20108000881F991F1A9469F760957095809590959B01AC01BD01CF01089597FB092E052647
-:2010A0000ED057FD04D0D7DF0AD0001C38F450954095309521953F4F4F4F5F4F0895F6F7B9
-:2010C00090958095709561957F4F8F4F9F4F0895F894FFCF000340000004400000020800B9
-:0C10E000000000000000000000001400F0
-:00000001FF

compiled/DUE_16u2_reflash/16u2-out2.hex

@@ -1,137 +0,0 @@
-:20000000A7C00000C0C00000BEC00000BCC00000BAC00000B8C00000B6C00000B4C0000023
-:20002000B2C00000B0C00000AEC00000C1C4000085C40000A8C00000A6C00000A4C0000070
-:20004000A2C00000A0C000009EC000009CC000009AC0000098C0000096C0000021C100003A
-:2000600092C0000090C000008EC000008CC000008AC0000088C0000086C0000084C0000028
-:2000800082C0000080C000007EC000007CC000007AC0000078C000001201100102000008C4
-:2000A00041233D0001000102DC0109023E00020100C0320904000001020201000524000143
-:2000C00010042402060524060001070582030800FF09040100020A000000070504024000AC
-:2000E0000107058302400001040309043203410072006400750069006E006F0020002800CA
-:200100007700770077002E00610072006400750069006E006F002E0063006300290000003D
-:200120002E03410072006400750069006E006F0020004400750065002000500072006F002D
-:2001400067002E00200050006F0072007400000011241FBECFEFD2E0DEBFCDBF11E0A0E029
-:20016000B1E0E4EDF0E102C005900D92A831B107D9F712E0A8E1B1E001C01D92A833B107E6
-:20018000E1F72BD1A5C73CCF9C01DC01AE57BF4FED91FC91119741911196FC93EE93805873
-:2001A0009F4FE817F90711F42D933C939FB7F894F901EC57FF4F8081815080839FBF842F6B
-:2001C0000895882311F03F9A01C03F9847980895882311F046980895469A0895DF92EF9253
-:2001E000FF920F931F93FC018489813019F0823019F404C010E303C010E001C010E283896E
-:20020000823009F418608589873031F0883031F0863029F4126003C0146001C016601092A3
-:20022000C9001092C8001092CA000785F088E188D288202F3F2D4E2D5D2D10921E01203B7C
-:2002400084E0380780E0480780E0580719F481E080931E01CA01B90122E030E040E050E006
-:200260001CD720583B47414E5F4FCA01B901202F3F2D4E2D5D2DEFD6215030403093CD00D9
-:200280002093CC001093CA0082E08093C80088E98093C9001F910F91FF90EF90DF9008957E
-:2002A0001F920F920FB60F9211242F938F939F93EF93FF939091CE008EB38430F1F4E091ED
-:2002C000A201F091A3019083E091A201F091A301CF0101969093A3018093A201825A914079
-:2002E00021F482E291E0928381839FB7F8948091A6018F5F8093A6019FBFFF91EF919F911B
-:200300008F912F910F900FBE0F901F901895FC0140911A0140931B0180911C0180931D015F
-:200320008585282F30E02170307020931A01858590E096958795817080931C0180911E013B
-:20034000882339F088E790E090931901809318010895442341F4222331F082E390E09093EA
-:20036000190180931801089580E091E00AC680E091E0BDC584B7877F84BF88E10FB6F89468
-:2003800080936000109260000FBE81E01ADF16BC83E085BD86B58831E8F315BC16BC80E078
-:2003A00010DF469A3E9A87E690E09093CD008093CC0086E08093CA001092C80088E18093C1
-:2003C000C900539A5A9A8AB180638AB98BB180638BB9A9D284E085BD08950F931F93CF933B
-:2003E000DF93C8DF2FB7F89487EA91E0909328028093270290932A02809329022FBF2FB7A6
-:20040000F89482E291E09093A3018093A2019093A5018093A4012FBF7894C7EAD1E003E03E
-:200420008FB7F89490912B028FBF903809F180E091E0D3D497FD1CC0E0912702F09128025F
-:200440008083E0912702F0912802CF01019690932802809327028752924011F4D283C1831B
-:200460009FB7F89480912B028F5F80932B029FBF8FB7F8941091A6018FBFA89903C011361D
-:2004800008F456C0A89A8091A601882361F05D9800931F0108C082E291E076DE682F80E0C4
-:2004A00091E001D511501123B1F780911F01882351F080911F01815080931F0180911F0135
-:2004C000882309F45D9A80912001882351F08091200181508093200180912001882309F44E
-:2004E0005C9A809118019091190118161906E4F4CC97CD9710F481E001C080E069DE8091D7
-:200500001801909119010197C29710F481E001C080E057DE809118019091190101979093BB
-:2005200019018093180104C080E052DE80E049DE8FB7F89490912B028FBF992369F087EAA6
-:2005400091E022DE982F8091C80085FFFCCF9093CE005C980093200180E091E095D42AD46A
-:200560005FCFDA01923049F0933061F09130F9F4E8E9F0E022E130E01EC0EAEAF0E02EE36E
-:2005800030E019C0813049F0813018F0823079F408C0E8EEF0E0849107C0ECEEF0E08491A7
-:2005A00003C0E0E2F1E08491282F30E004C0E0E0F0E020E030E0ED93FC93C901089528E087
-:2005C00030E040E003C04F5F220F331F28173907D0F3842F8295807F08958093E900809142
-:2005E000EB0081608093EB001092ED006093EC004093ED008091EE00881F8827881F08956A
-:200600001092F40090E09093E9001092F0001092E8001092ED008091EB008E7F8093EB0016
-:200620009F5F953081F708958091300288238CF403C08EB38823B1F08091E80082FFF9CFE2
-:200640008091E8008B778093E80008958EB3882349F08091E80080FFF9CF8091E8008E77A4
-:200660008093E800089594E68091EC0080FF05C08091E80080FF05C023C08091E80082FD8F
-:200680001FC08EB3882311F482E008958EB3853011F483E008958091EB0085FF02C081E0ED
-:2006A00008958091E10082FFDFCF8091E1008B7F8093E100992311F484E008959150D4CF46
-:2006C00080E008959C0140913602509137024617570718F4F90120E038C06115710511F0B7
-:2006E000AB01F8CF8091E8008E778093E80040E050E0F0CF8091E80083FF02C081E0089544
-:200700008091E80082FD2DC08EB3882381F18EB3853079F18091E80080FF17C09091F20054
-:2007200006C081918093F100415050409F5F4115510511F09830A8F320E0983009F421E0E8
-:200740008091E8008E778093E8004115510591F6222381F606C08EB3882349F08EB38530D0
-:2007600041F08091E80082FFF6CF80E0089582E0089583E008959C0140913602509137024D
-:200780004617570710F490E03BC06115710511F0AB01F9CF8091E8008E778093E80040E0B5
-:2007A00050E0F1CF8091E80083FF02C081E008958091E80082FD30C08EB3882399F18EB3EF
-:2007C000853091F18091E80080FF1AC08091F20009C0F9012F5F3F4FE491E093F100415044
-:2007E00050408F5F4115510511F0883090F390E0883009F491E08091E8008E778093E80004
-:200800004115510579F6992369F606C08EB3882349F08EB3853041F08091E80082FFF6CF51
-:2008200080E0089582E0089583E008959C016115710529F48091E8008B778093E800F90126
-:2008400020C08091E80083FF02C081E008958EB3882339F18EB3853031F18091E80082FFD5
-:20086000F0CF06C08091F10081936150704021F08091F2008823B1F78091E8008B77809307
-:20088000E80061157105E9F606C08EB3882349F08EB3853041F08091E80080FFF6CF80E0F6
-:2008A000089582E0089583E0089542D044D01EBA10922E0210922D0210922C0284E089BD81
-:2008C00089B5826089BD09B400FEFDCF8091D800982F9F779093D80080688093D800809186
-:2008E00063008E7F809363008091D8008F7D8093D8008091E0008E7F8093E0008091E1004F
-:200900008E7F8093E1008091E20081608093E2008091E100877F8093E1008091E200886046
-:200920008093E2000895C1DF81E080932F0208951092E20008951092E10008951F920F92B0
-:200940000FB60F9211241F932F933F934F935F936F937F938F939F93AF93BF93EF93FF93D2
-:20096000E9EEF0E0108117701082E0EFF0E08081877F80837894C3D0F894A9EEB0E01C927D
-:20098000E0EFF0E08081886080831C93FF91EF91BF91AF919F918F917F916F915F914F914D
-:2009A0003F912F911F910F900FBE0F901F9018951F920F920FB60F9211242F933F934F932D
-:2009C0005F936F937F938F939F93AF93BF93EF93FF938091E10080FF1BC08091E20080FF57
-:2009E00017C08091E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E2006F
-:200A00008091D80080628093D80019BC1EBAD1D18091E10084FF29C08091E20084FF25C018
-:200A200084E089BD89B5826089BD09B400FEFDCF8091D8008F7D8093D8008091E1008F7E40
-:200A40008093E1008091E2008F7E8093E2008091E20081608093E20080912E02882311F4F3
-:200A600081E001C084E08EBBA4D18091E10083FF27C08091E20083FF23C08091E100877F87
-:200A80008093E10082E08EBB10922E028091E1008E7F8093E1008091E2008E7F8093E200FD
-:200AA0008091E20080618093E200AADD80E060E042E093DD8091F00088608093F00079D17E
-:200AC0008091E10082FF0AC08091E20082FF06C08091E1008B7F8093E1006BD1FF91EF9163
-:200AE000BF91AF919F918F917F916F915F914F913F912F910F900FBE0F901F9018951F938D
-:200B0000DF93CF93CDB7DEB7AC970FB6F894DEBF0FBECDBFE0E3F2E08091F100819322E0B1
-:200B2000E833F207C9F78091300230913102353009F487C0363040F43130C9F1313070F08B
-:200B4000333009F01DC133C0383009F4EFC0393009F4FEC0363009F013C192C0803821F0E2
-:200B6000823809F00DC108C090912C0280912D02882399F0926011C0809134028770809355
-:200B8000E9008091EB0090E025E0969587952A95E1F7982F91701092E9008091E800877FCB
-:200BA0008093E8009093F1001092F100CAC0882319F0823009F0E4C090E08F7190700097FF
-:200BC00021F0029709F0DDC00CC080913202813009F0D7C010922D02333069F580932D02AF
-:200BE0002AC080913202882331F520913402277009F4C7C02093E9008091EB0080FFC1C05B
-:200C0000333021F48091EB00806213C08091EB0080618093EB0081E090E002C0880F991FEE
-:200C20002A95E2F78093EA001092EA008091EB0088608093EB001092E9008091E800877F27
-:200C400083C0882309F09CC0109132028091E800877F8093E800E8DC04C08EB3882309F411
-:200C600090C08091E80080FFF8CF812F8F7711F492E001C093E09EBB80688093E30081C00C
-:200C80008058823008F07CC0809132029091330223E08C3D920799F55FB7F894DE011596DC
-:200CA0004EE020E030E061E2E42FF0E060935700849120FF03C082958F704F5F982F9F70F5
-:200CC000892F805D8A3308F0895F8C9311961C9211972F5F3F4F12962431310529F75FBF39
-:200CE0008AE28B8383E08C838091E800877F8093E800CE0103966AE270E0E4DC11C0609188
-:200D00003402AE014F5F5F4F2CDCBC010097C9F18091E800877F8093E80089819A812BDD55
-:200D20008091E8008B778093E8002BC0803841F58091E800877F8093E80080912E02809396
-:200D4000F1008091E8008E778093E8006DDC19C08823B1F490913202923098F48091E8009B
-:200D6000877F8093E80090932E025EDC80912E02882311F483E001C084E08EBBF8DA01C090
-:200D8000F3DA8091E80083FF0AC08091EB0080628093EB008091E800877F8093E800AC9629
-:200DA0000FB6F894DEBF0FBECDBFCF91DF911F91089508951F938EB3882361F01091E900B9
-:200DC0001092E9008091E80083FF01C098DE17701093E9001F9108950895FC018EB38430E7
-:200DE00021F587859089A189B2890097A105B105E1F085818093E9008091E80082FF15C03E
-:200E00008091F200882319F42FEF3FEF04C08091F100282F30E08091F200882341F48091AA
-:200E2000E8008B778093E80002C02FEF3FEFC9010895FC018EB3843011F587859089A18911
-:200E4000B2890097A105B105D1F081818093E9008091F2008823A9F09091E8008091E8005C
-:200E60008E778093E80095FD0CC0FDDB982F882349F48091E8008E778093E80003C092E05F
-:200E800001C090E0892F0895FC018EB3843051F487859089A189B2890097A105B10511F017
-:200EA000CF01C7CF08951F93FC01162F8EB38430D9F487859089A189B2890097A105B105FC
-:200EC00099F081818093E9008091E80085FD08C08091E8008E778093E800C5DB882329F4E7
-:200EE0001093F10080E001C082E01F9108950F931F93CF93DF93EC010D96FC0189E0DF0190
-:200F00001D928A95E9F72A813B8109818C81882311F410E001C014E0C90151DB182B126025
-:200F2000802F61E8412F59DB882329F12E813F810D818885882311F410E001C014E0C90127
-:200F40003EDB182B1260802F60E8412F46DB882391F02A853B8509858C85882311F410E061
-:200F600001C014E0C9012BDB182B1260802F61EC412F33DB01C080E0DF91CF911F910F917C
-:200F80000895CF93DF93EC018091E80083FF60C0888190E020913402309135022817390781
-:200FA00009F056C080913102813261F0823220F4803209F04DC019C0823269F1833209F0C5
-:200FC00047C038C080913002813A09F041C08091E800877F8093E800CE010F9667E070E015
-:200FE00071DB8091E8008B7713C080913002813279F58091E800877F8093E800CE010F9605
-:2010000067E070E013DCCE01E9D88091E8008E778093E8001DC0809130028132C9F4809120
-:20102000E800877F8093E800809132028D87CE016ED90DC080913002813251F48091E80057
-:20104000877F8093E800CE0160913202C5DEECDADF91CF910895A1E21A2EAA1BBB1BFD0161
-:201060000DC0AA1FBB1FEE1FFF1FA217B307E407F50720F0A21BB30BE40BF50B661F771FE6
-:20108000881F991F1A9469F760957095809590959B01AC01BD01CF01089597FB092E052647
-:2010A0000ED057FD04D0D7DF0AD0001C38F450954095309521953F4F4F4F5F4F0895F6F7B9
-:2010C00090958095709561957F4F8F4F9F4F0895F894FFCF000340000004400000020800B9
-:0C10E000000000000000000000001400F0
-:00000001FF

compiled/DUE_16u2_reflash/16u2-out3.hex

@@ -1,137 +0,0 @@
-:20000000A7C00000C0C00000BEC00000BCC00000BAC00000B8C00000B6C00000B4C0000023
-:20002000B2C00000B0C00000AEC00000CBC400008FC40000A8C00000A6C00000A4C000005C
-:20004000A2C00000A0C000009EC000009CC000009AC0000098C0000096C0000021C100003A
-:2000600092C0000090C000008EC000008CC000008AC0000088C0000086C0000084C0000028
-:2000800082C0000080C000007EC000007CC000007AC0000078C000001201100102000008C4
-:2000A00041233D0001000102DC0109023E00020100C0320904000001020201000524000143
-:2000C00010042402060524060001070582030800FF09040100020A000000070504024000AC
-:2000E0000107058302400001040309043203410072006400750069006E006F0020002800CA
-:200100007700770077002E00610072006400750069006E006F002E0063006300290000003D
-:200120002E03410072006400750069006E006F0020004400750065002000500072006F002D
-:2001400067002E00200050006F0072007400000011241FBECFEFD2E0DEBFCDBF11E0A0E029
-:20016000B1E0E8EEF0E102C005900D92A831B107D9F712E0A8E1B1E001C01D92A833B107E1
-:20018000E1F722D1AFC73CCF9C01DC01AE57BF4FED91FC91119741911196FC93EE93805872
-:2001A0009F4FE817F90711F42D933C939FB7F894F901EC57FF4F8081815080839FBF842F6B
-:2001C0000895882311F03F9A01C03F9847980895882311F046980895469A0895DF92EF9253
-:2001E000FF920F931F93FC018489813019F0823019F404C010E303C010E001C010E283896E
-:20020000823009F418608589873031F0883031F0863029F4126003C0146001C016601092A3
-:20022000C9001092C8001092CA000785F088E188D288202F3F2D4E2D5D2D10921E01203B7C
-:2002400084E0380780E0480780E0580719F481E080931E01CA01B90122E030E040E050E006
-:2002600026D720583B47414E5F4FCA01B901202F3F2D4E2D5D2DF9D6215030403093CD00C5
-:200280002093CC001093CA0082E08093C80088E98093C9001F910F91FF90EF90DF9008957E
-:2002A0001F920F920FB60F9211242F938F939F93EF93FF939091CE008EB38430F1F4E091ED
-:2002C000A201F091A3019083E091A201F091A301CF0101969093A3018093A201825A914079
-:2002E00021F482E291E0928381839FB7F8948091A6018F5F8093A6019FBFFF91EF919F911B
-:200300008F912F910F900FBE0F901F901895FC0140911A0140931B0180911C0180931D015F
-:200320008585282F30E02170307020931A01858590E096958795817080931C0180911E013B
-:20034000882339F08FE590E090931901809318010895442341F4222331F08EE190E09093DB
-:20036000190180931801089580E091E014C680E091E0C7C51F9384B7877F84BF18E10FB69E
-:20038000F89410936000109260000FBE80E019DF469A3E9A87E690E09093CD008093CC0043
-:2003A00086E08093CA001092C8001093C900539A5A9A8AB180638AB98BB180638BB9BDD2F0
-:2003C00084E085BD1F9108950F931F93CF93DF93D1DF2FB7F89487EA91E09093280280939E
-:2003E000270290932A02809329022FBF2FB7F89482E291E09093A3018093A2019093A501CC
-:200400008093A4012FBF7894C7EAD1E003E08FB7F89490912B028FBF903809F180E091E0E4
-:20042000E6D497FD1CC0E0912702F09128028083E0912702F0912802CF0101969093280251
-:20044000809327028752924011F4D283C1839FB7F89480912B028F5F80932B029FBF8FB725
-:20046000F8941091A6018FBFA89903C0113608F469C0A89A8091A601882361F05D9800936C
-:200480001F0108C082E291E07FDE682F80E091E014D511501123B1F780911F01882351F097
-:2004A00080911F01815080931F0180911F01882309F45D9A80912001882351F080912001E7
-:2004C00081508093200180912001882309F45C9A8091180190911901181619067CF58F3560
-:2004E000910521F481E074DE80E06BDE8091180190911901839721F480E06ADE80E061DE1A
-:200500008091180190911901499721F480E060DE81E057DE8091180190911901019721F43B
-:2005200080E056DE80E04DDE80911801909119010197909319018093180104C080E048DEEC
-:2005400080E03FDE8FB7F89490912B028FBF992369F087EA91E018DE982F8091C80085FF9F
-:20056000FCCF9093CE005C980093200180E091E095D42AD44CCFDA01923049F0933061F0DA
-:200580009130F9F4E8E9F0E022E130E01EC0EAEAF0E02EE330E019C0813049F0813018F0DA
-:2005A000823079F408C0E8EEF0E0849107C0ECEEF0E0849103C0E0E2F1E08491282F30E041
-:2005C00004C0E0E0F0E020E030E0ED93FC93C901089528E030E040E003C04F5F220F331F15
-:2005E00028173907D0F3842F8295807F08958093E9008091EB0081608093EB001092ED00ED
-:200600006093EC004093ED008091EE00881F8827881F08951092F40090E09093E9001092EE
-:20062000F0001092E8001092ED008091EB008E7F8093EB009F5F953081F70895809130028F
-:2006400088238CF403C08EB38823B1F08091E80082FFF9CF8091E8008B778093E80008954A
-:200660008EB3882349F08091E80080FFF9CF8091E8008E778093E800089594E68091EC0008
-:2006800080FF05C08091E80080FF05C023C08091E80082FD1FC08EB3882311F482E00895AF
-:2006A0008EB3853011F483E008958091EB0085FF02C081E008958091E10082FFDFCF8091CD
-:2006C000E1008B7F8093E100992311F484E008959150D4CF80E008959C0140913602509171
-:2006E00037024617570718F4F90120E038C06115710511F0AB01F8CF8091E8008E77809397
-:20070000E80040E050E0F0CF8091E80083FF02C081E008958091E80082FD2DC08EB3882356
-:2007200081F18EB3853079F18091E80080FF17C09091F20006C081918093F1004150504088
-:200740009F5F4115510511F09830A8F320E0983009F421E08091E8008E778093E800411576
-:20076000510591F6222381F606C08EB3882349F08EB3853041F08091E80082FFF6CF80E02F
-:20078000089582E0089583E008959C0140913602509137024617570710F490E03BC061155D
-:2007A000710511F0AB01F9CF8091E8008E778093E80040E050E0F1CF8091E80083FF02C008
-:2007C00081E008958091E80082FD30C08EB3882399F18EB3853091F18091E80080FF1AC073
-:2007E0008091F20009C0F9012F5F3F4FE491E093F100415050408F5F4115510511F08830CA
-:2008000090F390E0883009F491E08091E8008E778093E8004115510579F6992369F606C0CA
-:200820008EB3882349F08EB3853041F08091E80082FFF6CF80E0089582E0089583E0089531
-:200840009C016115710529F48091E8008B778093E800F90120C08091E80083FF02C081E084
-:2008600008958EB3882339F18EB3853031F18091E80082FFF0CF06C08091F10081936150E7
-:20088000704021F08091F2008823B1F78091E8008B778093E80061157105E9F606C08EB379
-:2008A000882349F08EB3853041F08091E80080FFF6CF80E0089582E0089583E0089542D0E2
-:2008C00044D01EBA10922E0210922D0210922C0284E089BD89B5826089BD09B400FEFDCF22
-:2008E0008091D800982F9F779093D80080688093D800809163008E7F809363008091D80084
-:200900008F7D8093D8008091E0008E7F8093E0008091E1008E7F8093E1008091E200816028
-:200920008093E2008091E100877F8093E1008091E20088608093E2000895C1DF81E0809355
-:200940002F0208951092E20008951092E10008951F920F920FB60F9211241F932F933F9355
-:200960004F935F936F937F938F939F93AF93BF93EF93FF93E9EEF0E0108117701082E0EF73
-:20098000F0E08081877F80837894C3D0F894A9EEB0E01C92E0EFF0E08081886080831C9343
-:2009A000FF91EF91BF91AF919F918F917F916F915F914F913F912F911F910F900FBE0F901C
-:2009C0001F9018951F920F920FB60F9211242F933F934F935F936F937F938F939F93AF93BC
-:2009E000BF93EF93FF938091E10080FF1BC08091E20080FF17C08091E1008E7F8093E10009
-:200A00008091E2008E7F8093E2008091E20080618093E2008091D80080628093D80019BC8D
-:200A20001EBAD1D18091E10084FF29C08091E20084FF25C084E089BD89B5826089BD09B4B6
-:200A400000FEFDCF8091D8008F7D8093D8008091E1008F7E8093E1008091E2008F7E8093E6
-:200A6000E2008091E20081608093E20080912E02882311F481E001C084E08EBBA4D1809185
-:200A8000E10083FF27C08091E20083FF23C08091E100877F8093E10082E08EBB10922E024B
-:200AA0008091E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E200AADDFE
-:200AC00080E060E042E093DD8091F00088608093F00079D18091E10082FF0AC08091E2007E
-:200AE00082FF06C08091E1008B7F8093E1006BD1FF91EF91BF91AF919F918F917F916F9183
-:200B00005F914F913F912F910F900FBE0F901F9018951F93DF93CF93CDB7DEB7AC970FB667
-:200B2000F894DEBF0FBECDBFE0E3F2E08091F100819322E0E833F207C9F7809130023091AE
-:200B40003102353009F487C0363040F43130C9F1313070F0333009F01DC133C0383009F4B1
-:200B6000EFC0393009F4FEC0363009F013C192C0803821F0823809F00DC108C090912C02BC
-:200B800080912D02882399F0926011C08091340287708093E9008091EB0090E025E0969548
-:200BA00087952A95E1F7982F91701092E9008091E800877F8093E8009093F1001092F1008E
-:200BC000CAC0882319F0823009F0E4C090E08F719070009721F0029709F0DDC00CC0809164
-:200BE0003202813009F0D7C010922D02333069F580932D022AC080913202882331F52091FB
-:200C00003402277009F4C7C02093E9008091EB0080FFC1C0333021F48091EB00806213C0C2
-:200C20008091EB0080618093EB0081E090E002C0880F991F2A95E2F78093EA001092EA00D6
-:200C40008091EB0088608093EB001092E9008091E800877F83C0882309F09CC01091320210
-:200C60008091E800877F8093E800E8DC04C08EB3882309F490C08091E80080FFF8CF812FCA
-:200C80008F7711F492E001C093E09EBB80688093E30081C08058823008F07CC08091320228
-:200CA0009091330223E08C3D920799F55FB7F894DE0115964EE020E030E061E2E42FF0E05B
-:200CC00060935700849120FF03C082958F704F5F982F9F70892F805D8A3308F0895F8C93E8
-:200CE00011961C9211972F5F3F4F12962431310529F75FBF8AE28B8383E08C838091E80085
-:200D0000877F8093E800CE0103966AE270E0E4DC11C060913402AE014F5F5F4F2CDCBC0146
-:200D20000097C9F18091E800877F8093E80089819A812BDD8091E8008B778093E8002BC05A
-:200D4000803841F58091E800877F8093E80080912E028093F1008091E8008E778093E8006D
-:200D60006DDC19C08823B1F490913202923098F48091E800877F8093E80090932E025EDCD7
-:200D800080912E02882311F483E001C084E08EBBEEDA01C0E9DA8091E80083FF0AC08091EF
-:200DA000EB0080628093EB008091E800877F8093E800AC960FB6F894DEBF0FBECDBFCF9185
-:200DC000DF911F91089508951F938EB3882361F01091E9001092E9008091E80083FF01C079
-:200DE00098DE17701093E9001F9108950895FC018EB3843021F587859089A189B289009757
-:200E0000A105B105E1F085818093E9008091E80082FF15C08091F200882319F42FEF3FEF4D
-:200E200004C08091F100282F30E08091F200882341F48091E8008B778093E80002C02FEFCC
-:200E40003FEFC9010895FC018EB3843011F587859089A189B2890097A105B105D1F08181C5
-:200E60008093E9008091F2008823A9F09091E8008091E8008E778093E80095FD0CC0FDDBF7
-:200E8000982F882349F48091E8008E778093E80003C092E001C090E0892F0895FC018EB3B1
-:200EA000843051F487859089A189B2890097A105B10511F0CF01C7CF08951F93FC01162FC4
-:200EC0008EB38430D9F487859089A189B2890097A105B10599F081818093E9008091E80053
-:200EE00085FD08C08091E8008E778093E800C5DB882329F41093F10080E001C082E01F9180
-:200F000008950F931F93CF93DF93EC010D96FC0189E0DF011D928A95E9F72A813B81098197
-:200F20008C81882311F410E001C014E0C90151DB182B1260802F61E8412F59DB882329F143
-:200F40002E813F810D818885882311F410E001C014E0C9013EDB182B1260802F60E8412F33
-:200F600046DB882391F02A853B8509858C85882311F410E001C014E0C9012BDB182B12603C
-:200F8000802F61EC412F33DB01C080E0DF91CF911F910F910895CF93DF93EC018091E8003F
-:200FA00083FF60C0888190E020913402309135022817390709F056C080913102813261F061
-:200FC000823220F4803209F04DC019C0823269F1833209F047C038C080913002813A09F006
-:200FE00041C08091E800877F8093E800CE010F9667E070E071DB8091E8008B7713C08091C0
-:201000003002813279F58091E800877F8093E800CE010F9667E070E013DCCE01DFD88091F2
-:20102000E8008E778093E8001DC0809130028132C9F48091E800877F8093E80080913202F9
-:201040008D87CE0164D90DC080913002813251F48091E800877F8093E800CE01609132027A
-:20106000C5DEECDADF91CF910895A1E21A2EAA1BBB1BFD010DC0AA1FBB1FEE1FFF1FA217E2
-:20108000B307E407F50720F0A21BB30BE40BF50B661F771F881F991F1A9469F760957095B3
-:2010A000809590959B01AC01BD01CF01089597FB092E05260ED057FD04D0D7DF0AD0001CDC
-:2010C00038F450954095309521953F4F4F4F5F4F0895F6F790958095709561957F4F8F4F6A
-:2010E0009F4F0895F894FFCF00034000000440000002080000000000000000000000140066
-:00000001FF

compiled/DUE_16u2_reflash/16u2.hex

@@ -1,273 +0,0 @@
-:10000000A7C00000C0C00000BEC00000BCC000000F
-:10001000BAC00000B8C00000B6C00000B4C0000004
-:10002000B2C00000B0C00000AEC00000C1C40000FB
-:1000300085C40000A8C00000A6C00000A4C0000045
-:10004000A2C00000A0C000009EC000009CC0000034
-:100050009AC0000098C0000096C0000021C10000B6
-:1000600092C0000090C000008EC000008CC0000054
-:100070008AC0000088C0000086C0000084C0000064
-:1000800082C0000080C000007EC000007CC0000074
-:100090007AC0000078C000001201100102000008C0
-:1000A00041233D0001000102DC0109023E00020182
-:1000B00000C0320904000001020201000524000111
-:1000C0001004240206052406000107058203080027
-:1000D000FF09040100020A000000070504024000B5
-:1000E00001070583024000010403090432034100B3
-:1000F00072006400750069006E006F002000280027
-:100100007700770077002E006100720064007500B0
-:1001100069006E006F002E0063006300290000007C
-:100120002E03410072006400750069006E006F00CC
-:1001300020004400750065002000500072006F0030
-:1001400067002E00200050006F0072007400000055
-:1001500011241FBECFEFD2E0DEBFCDBF11E0A0E083
-:10016000B1E0E4EDF0E102C005900D92A831B107D5
-:10017000D9F712E0A8E1B1E001C01D92A833B107A0
-:10018000E1F72BD1A5C73CCF9C01DC01AE57BF4F97
-:10019000ED91FC91119741911196FC93EE9380584B
-:1001A0009F4FE817F90711F42D933C939FB7F894EC
-:1001B000F901EC57FF4F8081815080839FBF842FCE
-:1001C0000895882311F03F9A01C03F9847980895F9
-:1001D000882311F046980895469A0895DF92EF9289
-:1001E000FF920F931F93FC018489813019F08230B4
-:1001F00019F404C010E303C010E001C010E28389C9
-:10020000823009F418608589873031F0883031F008
-:10021000863029F4126003C0146001C01660109289
-:10022000C9001092C8001092CA000785F088E188C2
-:10023000D288202F3F2D4E2D5D2D10921E01203B88
-:1002400084E0380780E0480780E0580719F481E02F
-:1002500080931E01CA01B90122E030E040E050E085
-:100260001CD720583B47414E5F4FCA01B901202F90
-:100270003F2D4E2D5D2DEFD6215030403093CD00D7
-:100280002093CC001093CA0082E08093C80088E9D4
-:100290008093C9001F910F91FF90EF90DF90089518
-:1002A0001F920F920FB60F9211242F938F939F934B
-:1002B000EF93FF939091CE008EB38430F1F4E091F0
-:1002C000A201F091A3019083E091A201F091A3011A
-:1002D000CF0101969093A3018093A201825A91408D
-:1002E00021F482E291E0928381839FB7F894809118
-:1002F000A6018F5F8093A6019FBFFF91EF919F9111
-:100300008F912F910F900FBE0F901F901895FC01A9
-:1003100040911A0140931B0180911C0180931D01A3
-:100320008585282F30E02170307020931A01858553
-:1003300090E096958795817080931C0180911E01B5
-:10034000882339F088E790E0909319018093180191
-:100350000895442341F4222331F082E390E0909306
-:10036000190180931801089580E091E00AC680E0A9
-:1003700091E0BDC584B7877F84BF88E10FB6F8944C
-:1003800080936000109260000FBE81E01ADF16BCFF
-:1003900083E085BD86B58831E8F315BC16BC80E0E6
-:1003A00010DF469A3E9A87E690E09093CD008093C6
-:1003B000CC0086E08093CA001092C80088E1809348
-:1003C000C900539A5A9A8AB180638AB98BB1806303
-:1003D0008BB9A9D284E085BD08950F931F93CF9365
-:1003E000DF93C8DF2FB7F89487EA91E09093280253
-:1003F0008093270290932A02809329022FBF2FB760
-:10040000F89482E291E09093A3018093A2019093EB
-:10041000A5018093A4012FBF7894C7EAD1E003E03F
-:100420008FB7F89490912B028FBF903809F180E03C
-:1004300091E0D3D497FD1CC0E0912702F0912802EF
-:100440008083E0912702F0912802CF0101969093DA
-:100450002802809327028752924011F4D283C183ED
-:100460009FB7F89480912B028F5F80932B029FBFE0
-:100470008FB7F8941091A6018FBFA89903C01136C9
-:1004800008F456C0A89A8091A601882361F05D986F
-:1004900000931F0108C082E291E076DE682F80E0C1
-:1004A00091E001D511501123B1F780911F018823EC
-:1004B00051F080911F01815080931F0180911F0195
-:1004C000882309F45D9A80912001882351F080915E
-:1004D000200181508093200180912001882309F41C
-:1004E0005C9A809118019091190118161906E4F48C
-:1004F000CC97CD9710F481E001C080E069DE809157
-:100500001801909119010197C29710F481E001C080
-:1005100080E057DE80911801909119010197909326
-:1005200019018093180104C080E052DE80E049DEAA
-:100530008FB7F89490912B028FBF992369F087EAC7
-:1005400091E022DE982F8091C80085FFFCCF909328
-:10055000CE005C980093200180E091E095D42AD4ED
-:100560005FCFDA01923049F0933061F09130F9F4C5
-:10057000E8E9F0E022E130E01EC0EAEAF0E02EE334
-:1005800030E019C0813049F0813018F0823079F4C0
-:1005900008C0E8EEF0E0849107C0ECEEF0E0849152
-:1005A00003C0E0E2F1E08491282F30E004C0E0E0F5
-:1005B000F0E020E030E0ED93FC93C901089528E0DD
-:1005C00030E040E003C04F5F220F331F2817390788
-:1005D000D0F3842F8295807F08958093E9008091E5
-:1005E000EB0081608093EB001092ED006093EC00D3
-:1005F0004093ED008091EE00881F8827881F0895A2
-:100600001092F40090E09093E9001092F0001092A4
-:10061000E8001092ED008091EB008E7F8093EB005C
-:100620009F5F953081F708958091300288238CF484
-:1006300003C08EB38823B1F08091E80082FFF9CF28
-:100640008091E8008B778093E80008958EB388232B
-:1006500049F08091E80080FFF9CF8091E8008E7723
-:100660008093E800089594E68091EC0080FF05C037
-:100670008091E80080FF05C023C08091E80082FDE2
-:100680001FC08EB3882311F482E008958EB38530A5
-:1006900011F483E008958091EB0085FF02C081E0B2
-:1006A00008958091E10082FFDFCF8091E1008B7F90
-:1006B0008093E100992311F484E008959150D4CF00
-:1006C00080E008959C014091360250913702461710
-:1006D000570718F4F90120E038C06115710511F0D1
-:1006E000AB01F8CF8091E8008E778093E80040E07E
-:1006F00050E0F0CF8091E80083FF02C081E00895D0
-:100700008091E80082FD2DC08EB3882381F18EB3E5
-:10071000853079F18091E80080FF17C09091F20058
-:1007200006C081918093F100415050409F5F411578
-:10073000510511F09830A8F320E0983009F421E039
-:100740008091E8008E778093E8004115510591F67D
-:10075000222381F606C08EB3882349F08EB38530FC
-:1007600041F08091E80082FFF6CF80E0089582E0BA
-:10077000089583E008959C0140913602509137021C
-:100780004617570710F490E03BC06115710511F052
-:10079000AB01F9CF8091E8008E778093E80040E0CC
-:1007A00050E0F1CF8091E80083FF02C081E008951E
-:1007B0008091E80082FD30C08EB3882399F18EB31A
-:1007C000853091F18091E80080FF1AC08091F2009D
-:1007D00009C0F9012F5F3F4FE491E093F1004150D0
-:1007E00050408F5F4115510511F0883090F390E033
-:1007F000883009F491E08091E8008E778093E800DA
-:100800004115510579F6992369F606C08EB3882300
-:1008100049F08EB3853041F08091E80082FFF6CF39
-:1008200080E0089582E0089583E008959C016115B9
-:10083000710529F48091E8008B778093E800F90135
-:1008400020C08091E80083FF02C081E008958EB34C
-:10085000882339F18EB3853031F18091E80082FF31
-:10086000F0CF06C08091F10081936150704021F07B
-:100870008091F2008823B1F78091E8008B77809314
-:10088000E80061157105E9F606C08EB3882349F0CA
-:100890008EB3853041F08091E80080FFF6CF80E094
-:1008A000089582E0089583E0089542D044D01EBAAE
-:1008B00010922E0210922D0210922C0284E089BD1B
-:1008C00089B5826089BD09B400FEFDCF8091D80052
-:1008D000982F9F779093D80080688093D80080915C
-:1008E00063008E7F809363008091D8008F7D80931A
-:1008F000D8008091E0008E7F8093E0008091E1003D
-:100900008E7F8093E1008091E20081608093E2001D
-:100910008091E100877F8093E1008091E200886010
-:100920008093E2000895C1DF81E080932F02089553
-:100930001092E20008951092E10008951F920F9224
-:100940000FB60F9211241F932F933F934F935F93F2
-:100950006F937F938F939F93AF93BF93EF93FF9387
-:10096000E9EEF0E0108117701082E0EFF0E0808196
-:10097000877F80837894C3D0F894A9EEB0E01C926E
-:10098000E0EFF0E08081886080831C93FF91EF911D
-:10099000BF91AF919F918F917F916F915F914F9197
-:1009A0003F912F911F910F900FBE0F901F901895A0
-:1009B0001F920F920FB60F9211242F933F934F93D4
-:1009C0005F936F937F938F939F93AF93BF93EF93B7
-:1009D000FF938091E10080FF1BC08091E20080FFC7
-:1009E00017C08091E1008E7F8093E1008091E2004A
-:1009F0008E7F8093E2008091E20080618093E2002C
-:100A00008091D80080628093D80019BC1EBAD1D1E1
-:100A10008091E10084FF29C08091E20084FF25C01D
-:100A200084E089BD89B5826089BD09B400FEFDCF2F
-:100A30008091D8008F7D8093D8008091E1008F7ED7
-:100A40008093E1008091E2008F7E8093E2008091AC
-:100A5000E20081608093E20080912E02882311F4ED
-:100A600081E001C084E08EBBA4D18091E10083FFCE
-:100A700027C08091E20083FF23C08091E100877F3F
-:100A80008093E10082E08EBB10922E028091E10003
-:100A90008E7F8093E1008091E2008E7F8093E20060
-:100AA0008091E20080618093E200AADD80E060E056
-:100AB00042E093DD8091F00088608093F00079D16E
-:100AC0008091E10082FF0AC08091E20082FF06C0AF
-:100AD0008091E1008B7F8093E1006BD1FF91EF91DA
-:100AE000BF91AF919F918F917F916F915F914F9146
-:100AF0003F912F910F900FBE0F901F9018951F934D
-:100B0000DF93CF93CDB7DEB7AC970FB6F894DEBFC7
-:100B10000FBECDBFE0E3F2E08091F100819322E0CF
-:100B2000E833F207C9F78091300230913102353055
-:100B300009F487C0363040F43130C9F1313070F0FB
-:100B4000333009F01DC133C0383009F4EFC03930FB
-:100B500009F4FEC0363009F013C192C0803821F08C
-:100B6000823809F00DC108C090912C0280912D02AD
-:100B7000882399F0926011C080913402877080932D
-:100B8000E9008091EB0090E025E0969587952A9505
-:100B9000E1F7982F91701092E9008091E800877F2B
-:100BA0008093E8009093F1001092F100CAC088236E
-:100BB00019F0823009F0E4C090E08F7190700097D6
-:100BC00021F0029709F0DDC00CC080913202813023
-:100BD00009F0D7C010922D02333069F580932D02B1
-:100BE0002AC080913202882331F520913402277087
-:100BF00009F4C7C02093E9008091EB0080FFC1C0D9
-:100C0000333021F48091EB00806213C08091EB00BF
-:100C100080618093EB0081E090E002C0880F991F13
-:100C20002A95E2F78093EA001092EA008091EB00A7
-:100C300088608093EB001092E9008091E800877F44
-:100C400083C0882309F09CC0109132028091E80093
-:100C5000877F8093E800E8DC04C08EB3882309F422
-:100C600090C08091E80080FFF8CF812F8F7711F43A
-:100C700092E001C093E09EBB80688093E30081C056
-:100C80008058823008F07CC080913202909133020B
-:100C900023E08C3D920799F55FB7F894DE01159635
-:100CA0004EE020E030E061E2E42FF0E06093570096
-:100CB000849120FF03C082958F704F5F982F9F70A3
-:100CC000892F805D8A3308F0895F8C9311961C927E
-:100CD00011972F5F3F4F12962431310529F75FBFDF
-:100CE0008AE28B8383E08C838091E800877F809306
-:100CF000E800CE0103966AE270E0E4DC11C0609186
-:100D00003402AE014F5F5F4F2CDCBC010097C9F18C
-:100D10008091E800877F8093E80089819A812BDDAC
-:100D20008091E8008B778093E8002BC0803841F5F4
-:100D30008091E800877F8093E80080912E02809365
-:100D4000F1008091E8008E778093E8006DDC19C097
-:100D50008823B1F490913202923098F48091E800A7
-:100D6000877F8093E80090932E025EDC80912E02B4
-:100D7000882311F483E001C084E08EBBF8DA01C05F
-:100D8000F3DA8091E80083FF0AC08091EB00806273
-:100D90008093EB008091E800877F8093E800AC9619
-:100DA0000FB6F894DEBF0FBECDBFCF91DF911F917C
-:100DB000089508951F938EB3882361F01091E90080
-:100DC0001092E9008091E80083FF01C098DE17705F
-:100DD0001093E9001F9108950895FC018EB38430AB
-:100DE00021F587859089A189B2890097A105B10570
-:100DF000E1F085818093E9008091E80082FF15C0D1
-:100E00008091F200882319F42FEF3FEF04C0809106
-:100E1000F100282F30E08091F200882341F4809186
-:100E2000E8008B778093E80002C02FEF3FEFC90105
-:100E30000895FC018EB3843011F587859089A189CE
-:100E4000B2890097A105B105D1F081818093E900B5
-:100E50008091F2008823A9F09091E8008091E80049
-:100E60008E778093E80095FD0CC0FDDB982F8823DA
-:100E700049F48091E8008E778093E80003C092E007
-:100E800001C090E0892F0895FC018EB3843051F4A5
-:100E900087859089A189B2890097A105B10511F0D4
-:100EA000CF01C7CF08951F93FC01162F8EB3843056
-:100EB000D9F487859089A189B2890097A105B105E8
-:100EC00099F081818093E9008091E80085FD08C058
-:100ED0008091E8008E778093E800C5DB882329F4B1
-:100EE0001093F10080E001C082E01F9108950F93FC
-:100EF0001F93CF93DF93EC010D96FC0189E0DF0196
-:100F00001D928A95E9F72A813B8109818C8188238A
-:100F100011F410E001C014E0C90151DB182B12607C
-:100F2000802F61E8412F59DB882329F12E813F81F1
-:100F30000D818885882311F410E001C014E0C901F7
-:100F40003EDB182B1260802F60E8412F46DB8823A0
-:100F500091F02A853B8509858C85882311F410E062
-:100F600001C014E0C9012BDB182B1260802F61EC4B
-:100F7000412F33DB01C080E0DF91CF911F910F91B2
-:100F80000895CF93DF93EC018091E80083FF60C068
-:100F9000888190E02091340230913502281739077A
-:100FA00009F056C080913102813261F0823220F422
-:100FB000803209F04DC019C0823269F1833209F0E4
-:100FC00047C038C080913002813A09F041C0809119
-:100FD000E800877F8093E800CE010F9667E070E01D
-:100FE00071DB8091E8008B7713C0809130028132F1
-:100FF00079F58091E800877F8093E800CE010F9615
-:1010000067E070E013DCCE01E9D88091E8008E77CC
-:101010008093E8001DC0809130028132C9F4809134
-:10102000E800877F8093E800809132028D87CE01AF
-:101030006ED90DC080913002813251F48091E80068
-:10104000877F8093E800CE0160913202C5DEECDA42
-:10105000DF91CF910895A1E21A2EAA1BBB1BFD01BF
-:101060000DC0AA1FBB1FEE1FFF1FA217B307E40787
-:10107000F50720F0A21BB30BE40BF50B661F771FDF
-:10108000881F991F1A9469F76095709580959095BF
-:101090009B01AC01BD01CF01089597FB092E0526E8
-:1010A0000ED057FD04D0D7DF0AD0001C38F450957D
-:1010B0004095309521953F4F4F4F5F4F0895F6F77C
-:1010C00090958095709561957F4F8F4F9F4F0895B4
-:0410D000F894FFCFC2
-:1010D400000340000004400000020800000000007B
-:0810E4000000000000001400F0
-:00000001FF

compiled/DUE_16u2_reflash/Arduino-usbserial.hex

@@ -0,0 +1,277 @@
+:100000009FC00000B8C00000B6C00000B4C000002F
+:10001000B2C00000B0C00000AEC00000ACC0000024
+:10002000AAC00000A8C00000A6C00000B5C3000020
+:100030005AC40000A0C000009EC000009CC0000088
+:100040009AC0000098C0000096C0000094C0000054
+:1000500092C0000090C000008EC0000007C20000E7
+:100060008AC0000088C0000086C0000084C0000074
+:1000700082C00000D704F904EB05F904EB053E0546
+:100080005B05EB05AE05C0052E0341007200640060
+:10009000750069006E006F00200044007500650067
+:1000A0002000500072006F0067002E0020005000FA
+:1000B0006F0072007400000032034100720064009F
+:1000C000750069006E006F0020002800770077003F
+:1000D00077002E00610072006400750069006E00F8
+:1000E0006F002E0063006300290000000403090470
+:1000F00009023E00020100C03209040000010202B0
+:100100000100052400011004240206052406000154
+:10011000070582030800FF09040100020A0000002D
+:100120000705040240000107058302400001120197
+:1001300010010200000841233D0001000102DC0122
+:1001400011241FBECFEFD2E0DEBFCDBF11E0A0E093
+:10015000B1E0EEE1F1E102C005900D92AA31B107E4
+:10016000D9F722E0AAE1B1E001C01D92A833B2079D
+:10017000E1F77BD0D2C744CFFC01E058FF4FA0810C
+:10018000B1816C93A081B1819D012F5F3F4F31837D
+:1001900020832E173F0721F412969C938E9311977C
+:1001A0002FB7F894FC01EC57FF4F80818F5F80835D
+:1001B0002FBF0895DC01AE57BF4FED91FC91119711
+:1001C00021911196FC93EE93AC0140585F4FE417D8
+:1001D000F50711F48D939C933FB7F894FC01EC570D
+:1001E000FF4F9081915090833FBF822F08958823C5
+:1001F00021F03F9A47985C9808953F9847985C9AF9
+:100200000895882319F046985D980895469A5D9A56
+:10021000089584B7877F84BF0FB6F894A89580911E
+:100220006000886180936000109260000FBE80E0E3
+:10023000DEDF469A3E9A87E690E09093CD00809369
+:10024000CC0086E08093CA001092C80088E18093B9
+:10025000C900539A5A9A8AB180638AB98BB1806374
+:100260008BB98FD284E085BD0895D3DF2FB7F89482
+:1002700087EA91E0909328028093270290932A02C4
+:10028000809329022FBF2FB7F89482E291E09093D8
+:10029000A3018093A2019093A5018093A4012FBF95
+:1002A0007894D3E09FB7F89480912B029FBF803859
+:1002B00049F084E091E0C2D697FD04C0682F87EA38
+:1002C00091E05ADF8FB7F894C091A6018FBFA8992B
+:1002D00003C0C13608F453C0A89A8091A6018823B0
+:1002E00019F05D98D0931F01CC2349F082E291E090
+:1002F00061DF682F84E091E042D6C150F5CF809154
+:100300001F01882341F080911F01815080931F01BC
+:10031000811101C05D9A80912001882341F0809174
+:100320002001815080932001811101C05C9A80914D
+:1003300002019091030118161906ECF4CC97853B45
+:10034000910510F481E001C080E05BDF8091020143
+:10035000909103010197C29710F481E001C080E001
+:1003600046DF809102019091030101979093030170
+:100370008093020104C080E044DF80E038DF9FB753
+:10038000F89480912B029FBF882361F087EA91E067
+:1003900011DF9091C80095FFFCCF8093CE005C9850
+:1003A000D093200184E091E03BD608D57BCF84E058
+:1003B00091E086C584E091E013C5CF92DF92EF9281
+:1003C000FF92CF93FC018489813021F0823021F4A7
+:1003D000C0E203C0C0E301C0C0E08389823009F4F9
+:1003E000C8608589873031F0883031F0863029F453
+:1003F000C26003C0C46001C0C6601092C900109200
+:10040000C8001092CA00C784D088E188F28881E0D1
+:1004100090EBC91694E0D906E104F10409F080E0FC
+:1004200080931A01C701B60122E030E040E050E0BD
+:1004300052D6CA01B90160587B47814E9F4FA70130
+:10044000960127D6215031093093CD002093CC005E
+:10045000C093CA0082E08093C80088E98093C900F5
+:10046000CF91FF90EF90DF90CF9008951F920F9261
+:100470000FB60F9211242F933F934F935F936F9377
+:100480007F938F939F93AF93BF93EF93FF9360916D
+:10049000CE008EB3843019F482E291E06DDEFF91DC
+:1004A000EF91BF91AF919F918F917F916F915F91EC
+:1004B0004F913F912F910F900FBE0F901F90189565
+:1004C00020911E0120931D0130911C0130931B01CE
+:1004D000FC018585982F917090931E0186958170FF
+:1004E00080931C0180911A01882319F084EB90E01D
+:1004F00006C0211108C0992331F082E390E0909367
+:100500000301809302010895292F332722303105FA
+:1005100059F02330310569F021303105E9F482E1E9
+:1005200090E02EE231E01CC08EE390E020EF30E05E
+:1005300017C099278130910549F028F0029761F49E
+:10054000E8E8F0E005C0ECEEF0E002C0E8EBF0E037
+:10055000849190E09F0104C080E090E020E030E0D2
+:10056000FA01318320830895EF92FF920F931F9336
+:10057000CF93DF93CDB7DEB72A970FB6F894DEBFDF
+:100580000FBECDBF7E0126E0E20EF11CFE013196CA
+:100590009F01870190E09093E9005091EC00D80111
+:1005A0005D938D015091ED00D9015D939D019F5F99
+:1005B000953089F7282F30E08701020F131FD801EB
+:1005C0006C932E0F3F1FD9014C9391E09093E9005B
+:1005D0001092F0001092E8001092ED002091EB00D4
+:1005E0002E7F2093EB009F5F953081F790E0208174
+:1005F00021FD0BC09F5F3196BFEFEB1AFB0A9530D0
+:10060000B1F78093E90081E013C09093E900209155
+:10061000EB0021602093EB00D7012C912093EC009C
+:1006200020812093ED002091EE0027FDE3CF80E0B4
+:100630002A960FB6F894DEBF0FBECDBFDF91CF91E3
+:100640001F910F91FF90EF9008951092F40080E0B9
+:100650008093E9001092F0001092E8001092ED00F3
+:100660009091EB009E7F9093EB008F5F853081F738
+:1006700008958091300287FF0FC08091E80082FDCD
+:1006800004C08EB38111F9CF10C08091E8008B7740
+:100690000AC08EB3882349F08091E80080FFF9CF2B
+:1006A0008091E8008E778093E800089585E6909128
+:1006B000EC0090FF05C09091E80090FF05C01BC0C2
+:1006C0009091E80092FD17C09EB39923B1F09EB3BC
+:1006D0009530A9F09091EB0095FD13C09091E10049
+:1006E00092FFE5CF9091E1009B7F9093E1008150D4
+:1006F000F1F684E0089580E0089582E0089583E0B3
+:10070000089581E0089542D044D01EBA10922E027E
+:1007100010922D0210922C0284E089BD89B582606E
+:1007200089BD09B400FEFDCF8091D800982F9F7736
+:100730009093D80080688093D800809163008E7F6A
+:10074000809363008091D8008F7D8093D800809142
+:10075000E0008E7F8093E0008091E1008E7F8093A7
+:10076000E1008091E20081608093E2008091E100ED
+:10077000877F8093E1008091E20088608093E200AF
+:100780000895C1DF81E080932F0208951092E20066
+:1007900008951092E10008951F920F920FB60F92E4
+:1007A00011242F933F934F935F936F937F938F9376
+:1007B0009F93AF93BF93EF93FF938091E10080FFEE
+:1007C0001BC08091E20080FF17C08091E1008E7F06
+:1007D0008093E1008091E2008E7F8093E20080911F
+:1007E000E20080618093E2008091D8008062809373
+:1007F000D80019BC1EBAFBD18091E10084FF29C04A
+:100800008091E20084FF25C084E089BD89B58260C3
+:1008100089BD09B400FEFDCF8091D8008F7D809303
+:10082000D8008091E1008F7E8093E1008091E2000A
+:100830008F7E8093E2008091E20081608093E200ED
+:1008400080912E02811102C081E001C084E08EBB44
+:10085000CED18091E10083FF27C08091E20083FF29
+:1008600023C08091E100877F8093E10082E08EBB0E
+:1008700010922E028091E1008E7F8093E1008091A2
+:10088000E2008E7F8093E2008091E200806180939D
+:10089000E200DBDE42E060E080E066DE8091F000B6
+:1008A00088608093F000A3D18091E10082FF0AC0AC
+:1008B0008091E20082FF06C08091E1008B7F8093EF
+:1008C000E10095D1FF91EF91BF91AF919F918F91F1
+:1008D0007F916F915F914F913F912F910F900FBE3C
+:1008E0000F901F9018951F920F920FB60F92112420
+:1008F000FF920F931F932F933F934F935F936F93A9
+:100900007F938F939F93AF93BF93CF93DF93EF9397
+:10091000FF93C9EED0E088818770F82E188200EF2F
+:1009200010E0F8018081877F808378941DD0F8944F
+:100930001882F801808188608083F882FF91EF91AE
+:10094000DF91CF91BF91AF919F918F917F916F91E7
+:100950005F914F913F912F911F910F91FF900F90B9
+:100960000FBE0F901F9018951F93CF93DF93CDB7B5
+:10097000DEB7AA970FB6F894DEBF0FBECDBFE0E397
+:10098000F2E088E392E02091F10021938E179F0717
+:10099000D1F78091300290913102492F50E04A30D6
+:1009A000510508F018C1FA01E65CFF4FB0C380386A
+:1009B00081F0823809F00FC18091340287708093F2
+:1009C000E9008091EB0085FB882780F91092E9000F
+:1009D00006C080912C0290912D029111826090911D
+:1009E000E800977F9093E8008093F1001092F10067
+:1009F000C0C0282F2D7F09F0EEC0882319F0823067
+:100A000061F0DAC080913202813009F0D5C09330B4
+:100A100009F080E080932D022BC080913202811179
+:100A200027C080913402877009F4C6C08093E90022
+:100A30002091EB0020FFC0C0933021F48091EB00A7
+:100A4000806214C09091EB0090619093EB0021E0E4
+:100A500030E0A90102C0440F551F8A95E2F7409388
+:100A6000EA001092EA008091EB0088608093EB002E
+:100A70001092E9008091E800877F7EC08111ABC0B1
+:100A8000109132028091E800877F8093E800F1DDC9
+:100A90008091E80080FD04C08EB38111F9CF8CC035
+:100AA000812F8F7711F492E001C093E09EBB8068A4
+:100AB0008093E30081C08058823008F08CC0809120
+:100AC0003202909133028C3D53E0950779F583E033
+:100AD0008A838AE289833FB7F894DE01139690E017
+:100AE0002EE041E2E22FF0E040935700E49190FFC6
+:100AF00003C0E295EF702F5FEF7080E38E0F8A33B3
+:100B000010F0E95C01C0E82FF0E0ED93FD939F5FEA
+:100B1000943141F73FBF8091E800877F8093E800E0
+:100B20006AE270E0CE01019663D012C0AE014F5F61
+:100B30005F4F60913402E8DCBC01892B09F43CC0B2
+:100B40009091E800977F9093E80089819A81A6D0E0
+:100B50008091E8008B778093E8002EC08038D9F52B
+:100B60008091E800877F8093E80080912E02809337
+:100B7000F1008091E8008E778093E8007ADD1CC058
+:100B8000811129C0809132029091330299270297F6
+:100B90009CF48091E800877F8093E8008091320286
+:100BA00080932E0266DD80912E02811102C083E0C7
+:100BB00001C084E08EBBFBDB8091E80083FF0DC0A9
+:100BC0008091EB0080628093EB008091E800877F4A
+:100BD0008093E80002C0EEDBEFCFAA960FB6F89440
+:100BE000DEBF0FBECDBFDF91CF911F910895089555
+:100BF00020913602309137022617370748F06115E9
+:100C0000710539F42091E8002E772093E80001C0A7
+:100C1000B90130E06115710561F12091E80023FD13
+:100C200037C02091E80022FD2DC02EB3222391F180
+:100C30002EB3253089F12091E80020FFEBCF2091E1
+:100C4000F200FC01CF016115710549F0283038F43C
+:100C500081918093F100615071092F5FF3CF31E0F2
+:100C6000283009F030E02091E8002E772093E8004A
+:100C7000D1CF3111D2CF06C08EB3882359F08EB3B5
+:100C8000853051F08091E80082FFF6CF80E0089532
+:100C900081E0089582E0089583E00895209136026E
+:100CA000309137022617370748F06115710539F47E
+:100CB0002091E8002E772093E80001C0B90130E0D0
+:100CC0006115710569F12091E80023FD38C020917C
+:100CD000E80022FD2EC02EB3222399F12EB3253039
+:100CE00091F12091E80020FFEBCF2091F200FC0170
+:100CF000CF016115710551F0283040F48491809343
+:100D0000F100615071092F5F3196F2CF31E0283048
+:100D100009F030E02091E8002E772093E800D0CF52
+:100D20003111D1CF06C08EB3882359F08EB38530F0
+:100D300051F08091E80082FFF6CF80E0089581E0D5
+:100D4000089582E0089583E008956115710529F4FE
+:100D50002091E8002B772093E8006115710511F1CF
+:100D60002091E80023FD24C02EB3222319F12EB3D5
+:100D7000253011F12091E80022FFEFCF2091F20001
+:100D8000222331F301962091F100FC013197208359
+:100D90006150710999F7DCCF8EB3882359F08EB377
+:100DA000853051F08091E80080FFF6CF80E0089513
+:100DB00081E0089582E0089583E00895CF938EB393
+:100DC000882359F0C091E900C7701092E900809122
+:100DD000E80083FDC9DDC093E900CF91089508952F
+:100DE000CF93DF932091E80023FF67C0FC012081AF
+:100DF00030E040913402509135024217530709F018
+:100E00005CC0EC0180913102813251F018F48032E3
+:100E1000E1F053C0823281F1833209F43EC04DC00B
+:100E200080913002813A09F048C08091E800877FC4
+:100E30008093E80067E070E0CF010F96D9DE8091E3
+:100E4000E8008B778093E80038C0809130028132CF
+:100E5000A1F58091E800877F8093E80067E070E06B
+:100E6000CF010F9672DF8091E8008E778093E800C3
+:100E7000CE01DF91CF91A1CA809130028132E9F495
+:100E80008091E800877F8093E800F3DB8091320255
+:100E90008D87CE01DF91CF9113CB809130028132CB
+:100EA00061F48091E800877F8093E800E2DB609145
+:100EB0003202CE01DF91CF9192CFDF91CF91089591
+:100EC000CF93DF93EC01FC013D9689E0DF011D9299
+:100ED0008A95E9F78C81811102C090E001C094E00D
+:100EE0006A817B81898128E030E040E0261737075E
+:100EF00020F44F5F220F331FF9CF4295407F92605D
+:100F0000492B61E831DB8823B1F18885811102C06A
+:100F100090E001C094E06E817F818D8128E030E017
+:100F200040E02617370720F44F5F220F331FF9CF19
+:100F30004295407F9260492B60E816DB8823D9F008
+:100F40008C85811102C090E001C094E06A857B85A8
+:100F5000898528E030E040E02617370720F44F5F0E
+:100F6000220F331FF9CF4295407F9260492B61ECED
+:100F7000DF91CF91F9CA80E0DF91CF9108950F936F
+:100F80001F93CF932EB32430F1F4FC010785108911
+:100F900021893289012B022B032BA9F0C62F8181D5
+:100FA0008093E9008091E80085FF04C0C093F100C0
+:100FB00080E00AC08091E8008E778093E80076DBBD
+:100FC0008823A1F301C082E0CF911F910F91089572
+:100FD0002EB3243019F5FC01478550896189728947
+:100FE000452B462B472BD1F081818093E9008091DE
+:100FF000F200882389F09091E8008091E8008E77D4
+:101000008093E80095FD08C051DB811108C08091F4
+:10101000E8008E778093E80080E0089582E00895EC
+:101020002EB3243051F4FC014785508961897289BF
+:10103000452B462B472B09F0CBCF08952EB32430F8
+:1010400019F08FEF9FEF0895FC0147855089618962
+:101050007289452B462B472BA1F385818093E900AC
+:101060008091E80082FFEDCF8091F200882321F08B
+:101070002091F10030E002C02FEF3FEF8091F200AD
+:10108000811105C08091E8008B778093E800C90149
+:101090000895A1E21A2EAA1BBB1BFD010DC0AA1FB9
+:1010A000BB1FEE1FFF1FA217B307E407F50720F0D1
+:1010B000A21BB30BE40BF50B661F771F881F991F4C
+:1010C0001A9469F760957095809590959B01AC0195
+:1010D000BD01CF010895052E97FB16F400940FD0A3
+:1010E00057FD05D0D6DF07FC02D046F408C0509566
+:1010F0004095309521953F4F4F4F5F4F0895909504
+:101100008095709561957F4F8F4F9F4F0895EE0F9B
+:0E111000FF1F0590F491E02D0994F894FFCF95
+:10111E0014003200000340000004400000020800EA
+:0A112E0000000000000000000000B7
+:00000001FF

compiled/DUE_16u2_reflash/get.sh

@@ -1 +1 @@
-../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem14201 -b 19200 -p m16u2 -vvv -U flash:r:16u2-out3.hex:i
+avrdude  -c arduino -P /dev/cu.usbmodem144101 -b 19200 -p m16u2 -vvv -U flash:r:16u2-out.hex:i

compiled/DUE_16u2_reflash/reflash16u2DUE.bat

@@ -13,4 +13,4 @@ REM remove blank
 SET COMPORT=%COMX: =%
 
 
-..\tools\win\tool-avrdude\avrdude -C ..\tools\win\tool-avrdude\avrdude.conf -c arduino -P %COMPORT% -b 19200 -p m16u2 -vvv -U flash:w:16u2.hex:i
+..\tools\win\tool-avrdude\avrdude -C ..\tools\win\tool-avrdude\avrdude.conf -c arduino -P %COMPORT% -b 19200 -p m16u2 -vvv -U flash:w:Arduino-usbserial.hex:i

compiled/DUE_16u2_reflash/reflash16u2DUE.sh

@@ -1 +1 @@
-../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem14201 -b 19200 -p m16u2 -vvv -U flash:w:16u2.hex:i
+avrdude -c arduino -P /dev/cu.usbmodem144101 -b 19200 -p m16u2 -vvv -U flash:w:Arduino-usbserial.hex:i

compiled/DUE_16u2_reflash/reflashOriginal.sh

@@ -1 +1,3 @@
-../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem14201 -b 19200 -p m16u2 -vvv -U flash:w:16u2-original.hex:i
+#avrdude should be installed via homebrew
+#avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem144101 -b 19200 -p m16u2 -vvv -U flash:w:16u2-original.hex:i
+avrdude  -c arduino -P /dev/cu.usbmodem144101 -b 19200 -p m16u2 -vvv -U flash:w:16u2-original.hex:i

compiled/DUE_16u2_reflash/reflash_italiano.sh

@@ -0,0 +1,3 @@
+#avrdude should be installed via homebrew
+#avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem144101 -b 19200 -p m16u2 -vvv -U flash:w:16u2-original.hex:i
+avrdude  -c arduino -P /dev/cu.usbmodem144101 -b 19200 -p m16u2 -vvv -U flash:w:16u2-italiano.hex:i

compiled/Mega2560-optiboot/uploadOTA.sh

@@ -0,0 +1,2 @@
+#!/bin/sh
+../tools/mac/arduinoOTA -address 192.168.11.10 -port 80 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/lighthub21/upload.sh

@@ -1,3 +1,3 @@
-export PORT=cu.usbmodem141101
+export PORT=cu.usbmodem144101
 echo . |  stty -f /dev/$PORT speed 1200
-../tools/mac/tool-bossac/bossac -U false -p $PORT -i  -w -v -b firmware.bin -R 
+../tools/mac/tool-bossac/bossac -U false -p $PORT -i   -w -v -b firmware.bin -R 

compiled/lighthub21/uploadOTA.sh

@@ -1 +1 @@
-../tools/mac/arduinoOTA -address 192.168.11.172 -port 80 -username arduino -password password -sketch firmware.bin -b -upload /sketch
+../tools/mac/arduinoOTA -address 192.168.11.13 -port 80 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/lighthub21/upload_native.sh

@@ -0,0 +1,3 @@
+export PORT=cu.usbmodem144101
+echo . |  stty -f /dev/$PORT speed 1200
+../tools/mac/tool-bossac/bossac  -p $PORT -i  -w -v -b firmware.bin -R 

compiled/mega2560slim/uploadOTA.sh

@@ -1 +1 @@
-../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -P net:192.168.88.2:23000 -v -V  -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i
+avrdude -P net:192.168.88.2:23000 -v -V  -patmega2560 -cwiring -b115200 -D -Uflash:w:firmware.hex:i

compiled/tools/DUE_16u2_reflash/16u2.hex

@@ -1,273 +0,0 @@
-:10000000A7C00000C0C00000BEC00000BCC000000F
-:10001000BAC00000B8C00000B6C00000B4C0000004
-:10002000B2C00000B0C00000AEC00000C1C40000FB
-:1000300085C40000A8C00000A6C00000A4C0000045
-:10004000A2C00000A0C000009EC000009CC0000034
-:100050009AC0000098C0000096C0000021C10000B6
-:1000600092C0000090C000008EC000008CC0000054
-:100070008AC0000088C0000086C0000084C0000064
-:1000800082C0000080C000007EC000007CC0000074
-:100090007AC0000078C000001201100102000008C0
-:1000A00041233D0001000102DC0109023E00020182
-:1000B00000C0320904000001020201000524000111
-:1000C0001004240206052406000107058203080027
-:1000D000FF09040100020A000000070504024000B5
-:1000E00001070583024000010403090432034100B3
-:1000F00072006400750069006E006F002000280027
-:100100007700770077002E006100720064007500B0
-:1001100069006E006F002E0063006300290000007C
-:100120002E03410072006400750069006E006F00CC
-:1001300020004400750065002000500072006F0030
-:1001400067002E00200050006F0072007400000055
-:1001500011241FBECFEFD2E0DEBFCDBF11E0A0E083
-:10016000B1E0E4EDF0E102C005900D92A831B107D5
-:10017000D9F712E0A8E1B1E001C01D92A833B107A0
-:10018000E1F72BD1A5C73CCF9C01DC01AE57BF4F97
-:10019000ED91FC91119741911196FC93EE9380584B
-:1001A0009F4FE817F90711F42D933C939FB7F894EC
-:1001B000F901EC57FF4F8081815080839FBF842FCE
-:1001C0000895882311F03F9A01C03F9847980895F9
-:1001D000882311F046980895469A0895DF92EF9289
-:1001E000FF920F931F93FC018489813019F08230B4
-:1001F00019F404C010E303C010E001C010E28389C9
-:10020000823009F418608589873031F0883031F008
-:10021000863029F4126003C0146001C01660109289
-:10022000C9001092C8001092CA000785F088E188C2
-:10023000D288202F3F2D4E2D5D2D10921E01203B88
-:1002400084E0380780E0480780E0580719F481E02F
-:1002500080931E01CA01B90122E030E040E050E085
-:100260001CD720583B47414E5F4FCA01B901202F90
-:100270003F2D4E2D5D2DEFD6215030403093CD00D7
-:100280002093CC001093CA0082E08093C80088E9D4
-:100290008093C9001F910F91FF90EF90DF90089518
-:1002A0001F920F920FB60F9211242F938F939F934B
-:1002B000EF93FF939091CE008EB38430F1F4E091F0
-:1002C000A201F091A3019083E091A201F091A3011A
-:1002D000CF0101969093A3018093A201825A91408D
-:1002E00021F482E291E0928381839FB7F894809118
-:1002F000A6018F5F8093A6019FBFFF91EF919F9111
-:100300008F912F910F900FBE0F901F901895FC01A9
-:1003100040911A0140931B0180911C0180931D01A3
-:100320008585282F30E02170307020931A01858553
-:1003300090E096958795817080931C0180911E01B5
-:10034000882339F088E790E0909319018093180191
-:100350000895442341F4222331F082E390E0909306
-:10036000190180931801089580E091E00AC680E0A9
-:1003700091E0BDC584B7877F84BF88E10FB6F8944C
-:1003800080936000109260000FBE81E01ADF16BCFF
-:1003900083E085BD86B58831E8F315BC16BC80E0E6
-:1003A00010DF469A3E9A87E690E09093CD008093C6
-:1003B000CC0086E08093CA001092C80088E1809348
-:1003C000C900539A5A9A8AB180638AB98BB1806303
-:1003D0008BB9A9D284E085BD08950F931F93CF9365
-:1003E000DF93C8DF2FB7F89487EA91E09093280253
-:1003F0008093270290932A02809329022FBF2FB760
-:10040000F89482E291E09093A3018093A2019093EB
-:10041000A5018093A4012FBF7894C7EAD1E003E03F
-:100420008FB7F89490912B028FBF903809F180E03C
-:1004300091E0D3D497FD1CC0E0912702F0912802EF
-:100440008083E0912702F0912802CF0101969093DA
-:100450002802809327028752924011F4D283C183ED
-:100460009FB7F89480912B028F5F80932B029FBFE0
-:100470008FB7F8941091A6018FBFA89903C01136C9
-:1004800008F456C0A89A8091A601882361F05D986F
-:1004900000931F0108C082E291E076DE682F80E0C1
-:1004A00091E001D511501123B1F780911F018823EC
-:1004B00051F080911F01815080931F0180911F0195
-:1004C000882309F45D9A80912001882351F080915E
-:1004D000200181508093200180912001882309F41C
-:1004E0005C9A809118019091190118161906E4F48C
-:1004F000CC97CD9710F481E001C080E069DE809157
-:100500001801909119010197C29710F481E001C080
-:1005100080E057DE80911801909119010197909326
-:1005200019018093180104C080E052DE80E049DEAA
-:100530008FB7F89490912B028FBF992369F087EAC7
-:1005400091E022DE982F8091C80085FFFCCF909328
-:10055000CE005C980093200180E091E095D42AD4ED
-:100560005FCFDA01923049F0933061F09130F9F4C5
-:10057000E8E9F0E022E130E01EC0EAEAF0E02EE334
-:1005800030E019C0813049F0813018F0823079F4C0
-:1005900008C0E8EEF0E0849107C0ECEEF0E0849152
-:1005A00003C0E0E2F1E08491282F30E004C0E0E0F5
-:1005B000F0E020E030E0ED93FC93C901089528E0DD
-:1005C00030E040E003C04F5F220F331F2817390788
-:1005D000D0F3842F8295807F08958093E9008091E5
-:1005E000EB0081608093EB001092ED006093EC00D3
-:1005F0004093ED008091EE00881F8827881F0895A2
-:100600001092F40090E09093E9001092F0001092A4
-:10061000E8001092ED008091EB008E7F8093EB005C
-:100620009F5F953081F708958091300288238CF484
-:1006300003C08EB38823B1F08091E80082FFF9CF28
-:100640008091E8008B778093E80008958EB388232B
-:1006500049F08091E80080FFF9CF8091E8008E7723
-:100660008093E800089594E68091EC0080FF05C037
-:100670008091E80080FF05C023C08091E80082FDE2
-:100680001FC08EB3882311F482E008958EB38530A5
-:1006900011F483E008958091EB0085FF02C081E0B2
-:1006A00008958091E10082FFDFCF8091E1008B7F90
-:1006B0008093E100992311F484E008959150D4CF00
-:1006C00080E008959C014091360250913702461710
-:1006D000570718F4F90120E038C06115710511F0D1
-:1006E000AB01F8CF8091E8008E778093E80040E07E
-:1006F00050E0F0CF8091E80083FF02C081E00895D0
-:100700008091E80082FD2DC08EB3882381F18EB3E5
-:10071000853079F18091E80080FF17C09091F20058
-:1007200006C081918093F100415050409F5F411578
-:10073000510511F09830A8F320E0983009F421E039
-:100740008091E8008E778093E8004115510591F67D
-:10075000222381F606C08EB3882349F08EB38530FC
-:1007600041F08091E80082FFF6CF80E0089582E0BA
-:10077000089583E008959C0140913602509137021C
-:100780004617570710F490E03BC06115710511F052
-:10079000AB01F9CF8091E8008E778093E80040E0CC
-:1007A00050E0F1CF8091E80083FF02C081E008951E
-:1007B0008091E80082FD30C08EB3882399F18EB31A
-:1007C000853091F18091E80080FF1AC08091F2009D
-:1007D00009C0F9012F5F3F4FE491E093F1004150D0
-:1007E00050408F5F4115510511F0883090F390E033
-:1007F000883009F491E08091E8008E778093E800DA
-:100800004115510579F6992369F606C08EB3882300
-:1008100049F08EB3853041F08091E80082FFF6CF39
-:1008200080E0089582E0089583E008959C016115B9
-:10083000710529F48091E8008B778093E800F90135
-:1008400020C08091E80083FF02C081E008958EB34C
-:10085000882339F18EB3853031F18091E80082FF31
-:10086000F0CF06C08091F10081936150704021F07B
-:100870008091F2008823B1F78091E8008B77809314
-:10088000E80061157105E9F606C08EB3882349F0CA
-:100890008EB3853041F08091E80080FFF6CF80E094
-:1008A000089582E0089583E0089542D044D01EBAAE
-:1008B00010922E0210922D0210922C0284E089BD1B
-:1008C00089B5826089BD09B400FEFDCF8091D80052
-:1008D000982F9F779093D80080688093D80080915C
-:1008E00063008E7F809363008091D8008F7D80931A
-:1008F000D8008091E0008E7F8093E0008091E1003D
-:100900008E7F8093E1008091E20081608093E2001D
-:100910008091E100877F8093E1008091E200886010
-:100920008093E2000895C1DF81E080932F02089553
-:100930001092E20008951092E10008951F920F9224
-:100940000FB60F9211241F932F933F934F935F93F2
-:100950006F937F938F939F93AF93BF93EF93FF9387
-:10096000E9EEF0E0108117701082E0EFF0E0808196
-:10097000877F80837894C3D0F894A9EEB0E01C926E
-:10098000E0EFF0E08081886080831C93FF91EF911D
-:10099000BF91AF919F918F917F916F915F914F9197
-:1009A0003F912F911F910F900FBE0F901F901895A0
-:1009B0001F920F920FB60F9211242F933F934F93D4
-:1009C0005F936F937F938F939F93AF93BF93EF93B7
-:1009D000FF938091E10080FF1BC08091E20080FFC7
-:1009E00017C08091E1008E7F8093E1008091E2004A
-:1009F0008E7F8093E2008091E20080618093E2002C
-:100A00008091D80080628093D80019BC1EBAD1D1E1
-:100A10008091E10084FF29C08091E20084FF25C01D
-:100A200084E089BD89B5826089BD09B400FEFDCF2F
-:100A30008091D8008F7D8093D8008091E1008F7ED7
-:100A40008093E1008091E2008F7E8093E2008091AC
-:100A5000E20081608093E20080912E02882311F4ED
-:100A600081E001C084E08EBBA4D18091E10083FFCE
-:100A700027C08091E20083FF23C08091E100877F3F
-:100A80008093E10082E08EBB10922E028091E10003
-:100A90008E7F8093E1008091E2008E7F8093E20060
-:100AA0008091E20080618093E200AADD80E060E056
-:100AB00042E093DD8091F00088608093F00079D16E
-:100AC0008091E10082FF0AC08091E20082FF06C0AF
-:100AD0008091E1008B7F8093E1006BD1FF91EF91DA
-:100AE000BF91AF919F918F917F916F915F914F9146
-:100AF0003F912F910F900FBE0F901F9018951F934D
-:100B0000DF93CF93CDB7DEB7AC970FB6F894DEBFC7
-:100B10000FBECDBFE0E3F2E08091F100819322E0CF
-:100B2000E833F207C9F78091300230913102353055
-:100B300009F487C0363040F43130C9F1313070F0FB
-:100B4000333009F01DC133C0383009F4EFC03930FB
-:100B500009F4FEC0363009F013C192C0803821F08C
-:100B6000823809F00DC108C090912C0280912D02AD
-:100B7000882399F0926011C080913402877080932D
-:100B8000E9008091EB0090E025E0969587952A9505
-:100B9000E1F7982F91701092E9008091E800877F2B
-:100BA0008093E8009093F1001092F100CAC088236E
-:100BB00019F0823009F0E4C090E08F7190700097D6
-:100BC00021F0029709F0DDC00CC080913202813023
-:100BD00009F0D7C010922D02333069F580932D02B1
-:100BE0002AC080913202882331F520913402277087
-:100BF00009F4C7C02093E9008091EB0080FFC1C0D9
-:100C0000333021F48091EB00806213C08091EB00BF
-:100C100080618093EB0081E090E002C0880F991F13
-:100C20002A95E2F78093EA001092EA008091EB00A7
-:100C300088608093EB001092E9008091E800877F44
-:100C400083C0882309F09CC0109132028091E80093
-:100C5000877F8093E800E8DC04C08EB3882309F422
-:100C600090C08091E80080FFF8CF812F8F7711F43A
-:100C700092E001C093E09EBB80688093E30081C056
-:100C80008058823008F07CC080913202909133020B
-:100C900023E08C3D920799F55FB7F894DE01159635
-:100CA0004EE020E030E061E2E42FF0E06093570096
-:100CB000849120FF03C082958F704F5F982F9F70A3
-:100CC000892F805D8A3308F0895F8C9311961C927E
-:100CD00011972F5F3F4F12962431310529F75FBFDF
-:100CE0008AE28B8383E08C838091E800877F809306
-:100CF000E800CE0103966AE270E0E4DC11C0609186
-:100D00003402AE014F5F5F4F2CDCBC010097C9F18C
-:100D10008091E800877F8093E80089819A812BDDAC
-:100D20008091E8008B778093E8002BC0803841F5F4
-:100D30008091E800877F8093E80080912E02809365
-:100D4000F1008091E8008E778093E8006DDC19C097
-:100D50008823B1F490913202923098F48091E800A7
-:100D6000877F8093E80090932E025EDC80912E02B4
-:100D7000882311F483E001C084E08EBBF8DA01C05F
-:100D8000F3DA8091E80083FF0AC08091EB00806273
-:100D90008093EB008091E800877F8093E800AC9619
-:100DA0000FB6F894DEBF0FBECDBFCF91DF911F917C
-:100DB000089508951F938EB3882361F01091E90080
-:100DC0001092E9008091E80083FF01C098DE17705F
-:100DD0001093E9001F9108950895FC018EB38430AB
-:100DE00021F587859089A189B2890097A105B10570
-:100DF000E1F085818093E9008091E80082FF15C0D1
-:100E00008091F200882319F42FEF3FEF04C0809106
-:100E1000F100282F30E08091F200882341F4809186
-:100E2000E8008B778093E80002C02FEF3FEFC90105
-:100E30000895FC018EB3843011F587859089A189CE
-:100E4000B2890097A105B105D1F081818093E900B5
-:100E50008091F2008823A9F09091E8008091E80049
-:100E60008E778093E80095FD0CC0FDDB982F8823DA
-:100E700049F48091E8008E778093E80003C092E007
-:100E800001C090E0892F0895FC018EB3843051F4A5
-:100E900087859089A189B2890097A105B10511F0D4
-:100EA000CF01C7CF08951F93FC01162F8EB3843056
-:100EB000D9F487859089A189B2890097A105B105E8
-:100EC00099F081818093E9008091E80085FD08C058
-:100ED0008091E8008E778093E800C5DB882329F4B1
-:100EE0001093F10080E001C082E01F9108950F93FC
-:100EF0001F93CF93DF93EC010D96FC0189E0DF0196
-:100F00001D928A95E9F72A813B8109818C8188238A
-:100F100011F410E001C014E0C90151DB182B12607C
-:100F2000802F61E8412F59DB882329F12E813F81F1
-:100F30000D818885882311F410E001C014E0C901F7
-:100F40003EDB182B1260802F60E8412F46DB8823A0
-:100F500091F02A853B8509858C85882311F410E062
-:100F600001C014E0C9012BDB182B1260802F61EC4B
-:100F7000412F33DB01C080E0DF91CF911F910F91B2
-:100F80000895CF93DF93EC018091E80083FF60C068
-:100F9000888190E02091340230913502281739077A
-:100FA00009F056C080913102813261F0823220F422
-:100FB000803209F04DC019C0823269F1833209F0E4
-:100FC00047C038C080913002813A09F041C0809119
-:100FD000E800877F8093E800CE010F9667E070E01D
-:100FE00071DB8091E8008B7713C0809130028132F1
-:100FF00079F58091E800877F8093E800CE010F9615
-:1010000067E070E013DCCE01E9D88091E8008E77CC
-:101010008093E8001DC0809130028132C9F4809134
-:10102000E800877F8093E800809132028D87CE01AF
-:101030006ED90DC080913002813251F48091E80068
-:10104000877F8093E800CE0160913202C5DEECDA42
-:10105000DF91CF910895A1E21A2EAA1BBB1BFD01BF
-:101060000DC0AA1FBB1FEE1FFF1FA217B307E40787
-:10107000F50720F0A21BB30BE40BF50B661F771FDF
-:10108000881F991F1A9469F76095709580959095BF
-:101090009B01AC01BD01CF01089597FB092E0526E8
-:1010A0000ED057FD04D0D7DF0AD0001C38F450957D
-:1010B0004095309521953F4F4F4F5F4F0895F6F77C
-:1010C00090958095709561957F4F8F4F9F4F0895B4
-:0410D000F894FFCFC2
-:1010D400000340000004400000020800000000007B
-:0810E4000000000000001400F0
-:00000001FF

compiled/tools/DUE_16u2_reflash/readme.md

@@ -1,2 +0,0 @@
-This package need if you have problem with unrelable cold start of Arduino DUE
-Arduino ISP should be connected to 16u2 ICSP connector before run

compiled/tools/DUE_16u2_reflash/reflash16u2DUE.sh

@@ -1 +0,0 @@
-../../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem1411 -b 19200 -p m16u2 -vvv -U flash:w:16u2.hex:i

compiled/tools/mac/tool-avrdude/libavrdude.dylib

@@ -1 +0,0 @@
-libavrdude.1.dylib

compiled/tools/mac/tool-avrdude/libavrdude.la

@@ -1,41 +0,0 @@
-# libavrdude.la - a libtool library file
-# Generated by libtool (GNU libtool) 2.4.6
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='libavrdude.1.dylib'
-
-# Names of this library.
-library_names='libavrdude.1.dylib libavrdude.dylib'
-
-# The name of the static archive.
-old_library='libavrdude.a'
-
-# Linker flags that cannot go in dependency_libs.
-inherited_linker_flags=' '
-
-# Libraries that this one depends upon.
-dependency_libs=' -L/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib -lreadline -lncurses -ltermcap'
-
-# Names of additional weak libraries provided by this library
-weak_library_names=''
-
-# Version information for libavrdude.
-current=1
-age=0
-revision=0
-
-# Is this an already installed library?
-installed=yes
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=no
-
-# Files to dlopen/dlpreopen
-dlopen=''
-dlpreopen=''
-
-# Directory that this library needs to be installed in:
-libdir='/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib'

compiled/tools/mac/tool-avrdude/libusb-1.0.la

@@ -1,41 +0,0 @@
-# libusb-1.0.la - a libtool library file
-# Generated by libtool (GNU libtool) 2.4.2
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname=''
-
-# Names of this library.
-library_names=''
-
-# The name of the static archive.
-old_library='libusb-1.0.a'
-
-# Linker flags that can not go in dependency_libs.
-inherited_linker_flags=' '
-
-# Libraries that this one depends upon.
-dependency_libs=' -lobjc'
-
-# Names of additional weak libraries provided by this library
-weak_library_names=''
-
-# Version information for libusb-1.0.
-current=1
-age=1
-revision=0
-
-# Is this an already installed library?
-installed=yes
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=no
-
-# Files to dlopen/dlpreopen
-dlopen=''
-dlpreopen=''
-
-# Directory that this library needs to be installed in:
-libdir='/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib'

compiled/tools/mac/tool-avrdude/libusb-config

@@ -1,81 +0,0 @@
-#!/bin/sh
-
-prefix=/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir
-exec_prefix=${prefix}
-includedir=${prefix}/include
-libdir=${exec_prefix}/lib
-exec_prefix_set=no
-
-usage()
-{
-	cat <<EOF
-Usage: libusb-config [OPTIONS] [LIBRARIES]
-Options:
-	[--prefix[=DIR]]
-	[--exec-prefix[=DIR]]
-	[--version]
-	[--libs]
-	[--cflags]
-EOF
-	exit $1
-}
-
-if test $# -eq 0; then
-	usage 1 1>&2
-fi
-
-while test $# -gt 0; do
-  case "$1" in
-  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  case $1 in
-    --prefix=*)
-      prefix=$optarg
-      if test $exec_prefix_set = no ; then
-        exec_prefix=$optarg
-      fi
-      ;;
-    --prefix)
-      echo_prefix=yes
-      ;;
-    --exec-prefix=*)
-      exec_prefix=$optarg
-      exec_prefix_set=yes
-      ;;
-    --exec-prefix)
-      echo_exec_prefix=yes
-      ;;
-    --version)
-      echo 0.1.12
-      exit 0
-      ;;
-    --cflags)
-      if test "$includedir" != /usr/include ; then
-        includes="-I$includedir"
-      fi
-      echo_cflags=yes
-      ;;
-    --libs)
-      echo_libs=yes
-      ;;
-    *)
-      usage 1 1>&2
-      ;;
-  esac
-  shift
-done
-
-if test "$echo_prefix" = "yes"; then
-	echo $prefix
-fi
-if test "$echo_exec_prefix" = "yes"; then
-	echo $exec_prefix
-fi
-if test "$echo_cflags" = "yes"; then
-	echo $includes
-fi
-if test "$echo_libs" = "yes"; then
-	echo -L$libdir -lusb
-fi

compiled/tools/mac/tool-avrdude/libusb.la

@@ -1,41 +0,0 @@
-# libusb.la - a libtool library file
-# Generated by libtool (GNU libtool) 2.4.2
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname=''
-
-# Names of this library.
-library_names=''
-
-# The name of the static archive.
-old_library='libusb.a'
-
-# Linker flags that can not go in dependency_libs.
-inherited_linker_flags=' '
-
-# Libraries that this one depends upon.
-dependency_libs=' -L/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib /Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib/libusb-1.0.la -lobjc'
-
-# Names of additional weak libraries provided by this library
-weak_library_names=''
-
-# Version information for libusb.
-current=8
-age=4
-revision=4
-
-# Is this an already installed library?
-installed=yes
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=no
-
-# Files to dlopen/dlpreopen
-dlopen=''
-dlpreopen=''
-
-# Directory that this library needs to be installed in:
-libdir='/Users/jenkins/jenkins/workspace/avrdude/label/mac-mini/objdir/lib'

lighthub/abstractch.cpp

@@ -1,13 +1,18 @@
 
 #include "abstractch.h"
+#if not defined (NOIP)   
 #include <PubSubClient.h>
+#endif
 #include "utils.h"
 #include <aJSON.h>
 #include "main.h"
 
 extern lan_status lanStatus;
+
+#if not defined (NOIP)
 extern PubSubClient mqttClient;
 extern int8_t ethernetIdleCount;
+#endif
 
 int abstractCh::publishTopic(const char* topic, long value, const char* subtopic)
 { 
@@ -25,6 +30,7 @@ int abstractCh::publishTopic(const char* topic, float value, const char* subtopi
 
 int abstractCh::publishTopic(const char* topic, const char * value, const char* subtopic)
 {
+  #if not defined (NOIP)
   char addrstr[MQTT_TOPIC_LENGTH];
  if (!isNotRetainingStatus()) return 0;
     if (topic)
@@ -38,5 +44,6 @@ int abstractCh::publishTopic(const char* topic, const char * value, const char*
                         return 1;
                       }
      }
+ #endif    
 return 0;
 };

lighthub/abstractch.h

@@ -4,6 +4,7 @@
 #define CST_UNKNOWN  0
 #define CST_FAILED 1
 #define CST_INITIALIZED  2
+#define CST_USER 3
 
 class abstractCh {
 public:

lighthub/abstractin.cpp

@@ -1,14 +1,17 @@
 
 #include "abstractin.h"
 #include "abstractch.h"
+#if not defined (NOIP)   
 #include <PubSubClient.h>
+extern PubSubClient mqttClient;
+#endif
 #include "utils.h"
 #include <aJSON.h>
 #include "inputs.h"
 #include "main.h"
 
 extern lan_status lanStatus;
-extern PubSubClient mqttClient;
+
 
 int abstractIn::publish(long value, const char* subtopic)
 {

lighthub/candriver.cpp

@@ -0,0 +1,989 @@
+
+#ifdef  CANDRV
+
+#include <candriver.h>
+#include <Arduino.h>
+#include <main.h>
+#include <utils.h>
+
+#if defined(ARDUINO_ARCH_STM32)
+#include <STM32_CAN.h>
+STM32_CAN STMCan( CAN1, CAN_PINS::DEF, RX_SIZE_64, TX_SIZE_16 );
+#endif
+
+#if defined(ARDUINO_ARCH_ESP32)
+#include <CAN.h>
+#endif
+#if defined(__SAM3X8E__)
+#include <due_can.h>
+#endif
+
+#include <config.h>
+//#include <systemconfigdata.h>
+extern systemConfig sysConf;
+extern canStream CANConfStream; 
+extern aJsonObject * root;
+extern volatile int8_t configLocked;
+extern bool configLoaded;
+
+
+void printFrame(datagram_t * frame, uint8_t len ) {
+
+   debugSerial.print(" Data:");
+   for (int count = 0; count < len; count++) {
+       debugSerial.print(frame->data[count], HEX);
+       debugSerial.print(" ");
+   }
+   debugSerial.println();
+}
+
+
+bool canDriver::upTime(uint32_t ut)
+{
+  if (!controllerId) return false;  
+ canid_t id;
+ datagram_t packet;
+
+ id.reserve=0;
+ id.status=1;
+ id.payloadType=payloadType::metric;  
+ id.deviceId=controllerId;
+ id.subjId=metricType::UpTime;
+
+
+ packet.metric1=ut;
+
+ debugSerial<<("CAN: UpTime")<<endl;   
+ return write (id.id, &packet, 4);
+}
+
+bool canDriver::salt(uint32_t salt)
+{
+ if (!controllerId) return false;  
+ canid_t id;
+ datagram_t packet;
+
+ id.reserve=0;
+ id.status=1;
+ id.payloadType=payloadType::metric;  
+ id.deviceId=controllerId;
+ id.subjId=metricType::Salt;
+
+
+
+ packet.metric1=salt;
+
+ debugSerial<<("CAN: Salt")<<endl;   
+ return write (id.id, &packet, 4);
+}
+
+bool canDriver::lookupMAC()
+{
+   // return 0;
+    canid_t id;
+ datagram_t packet;
+ bool       res;
+
+ id.reserve=0;
+ id.status=0;
+ id.payloadType=payloadType::lookupMAC;  
+ id.deviceId=0;
+ id.subjId=0; //CRC?
+
+
+
+ memcpy(packet.mac,sysConf.mac,6);
+
+ debugSerial<<("CAN: Lookup MAC")<<endl;   
+  res=write (id.id, &packet, 6);
+ if (res) state=canState::MACLookup; 
+    else  state=canState::Error; 
+    responseTimer=millisNZ();
+ return res;
+}
+
+bool canDriver::requestFrame(uint8_t devId, payloadType _payloadType, uint16_t seqNo )
+{
+    canid_t id;
+ datagram_t packet;
+ bool       res;
+
+
+ id.reserve=0;
+ id.status=0;
+ id.payloadType=_payloadType;  
+ id.deviceId=devId;
+ id.subjId=seqNo; 
+
+
+packet.metric1 =0;
+ //memcpy(packet.mac,sysConf.mac,6);
+//delay (100);
+ debugSerial<<("CAN: Request frame ")<<_payloadType<<F(" for id ")<<devId<<F(" seq:")<<seqNo<<endl;   
+  res=write (id.id,&packet,1);
+ if (res) state=canState::FrameRequested; 
+    else  state=canState::Error; 
+    responseTimer=millisNZ();
+ return res;
+}
+
+bool canDriver::sendRemoteID(macAddress mac)
+{
+ canid_t id;
+ //datagram_t packet;
+ bool       res=false;
+ id.subjId=0; 
+ id.deviceId=getIdByMac(mac); //Retrieved controllerID
+ if (!id.deviceId) return false;
+ aJsonObject * config=getConfbyID(id.deviceId);
+ if (config) id.subjId=getCRC(config);   //CRC16 of remote config
+
+ id.reserve=0;
+ id.status=1; //response
+ id.payloadType=payloadType::lookupMAC;  
+
+
+
+
+ debugSerial<<("CAN: Send remote ID")<<endl;   
+ res = write (id.id,(datagram_t*)mac,6);
+ if (res) state=canState::Idle; 
+    else  state=canState::Error; 
+//    responseTimer=millisNZ(); ????????
+return res;
+}
+
+
+bool canDriver::begin()
+            { 
+            if (root)
+            {
+                canConfigObj =  aJson.getObjectItem(root, "can");
+                if (canConfigObj) 
+                    {
+                    canRemoteConfigObj=  aJson.getObjectItem(canConfigObj, "conf");
+                    controllerId = getMyId(); 
+                    }
+            confCRC=getCRC(root);        
+            }
+            
+
+                #ifndef NOIP    
+                if (!canConfigObj) return false;    
+                #endif     
+
+                            if (!ready) // not reInitialization
+                            {
+                            ready=false;    
+                            //STM32  
+                            #if defined(ARDUINO_ARCH_STM32)
+                            //Can= new STM32_CAN( CAN1, ALT );
+                            //if (!Can) return false;
+                            STMCan.begin(); //with retransmission
+                            STMCan.setBaudRate(50000);
+                            // STMCan.setFilter( 0, 0x153, 0x1FFFFFFF );
+                            #endif
+
+                            //ESP
+                            #if defined(ARDUINO_ARCH_ESP32)
+                            CAN.setPins(GPIO_NUM_35,GPIO_NUM_5);//(rx, tx); 
+                            // start the CAN bus at 500 kbps
+                            if (!CAN.begin(50000)) {return false;  }
+                            #endif    
+
+                            #if defined(__SAM3X8E__)
+                            Can0.begin(CAN_BPS_50K);
+
+                            int filter;
+                            //extended
+                            for (filter = 0; filter < 3; filter++) {
+                                Can0.setRXFilter(filter, 0, 0, true);
+                                //Can1.setRXFilter(filter, 0, 0, true);
+                            }  
+                            #endif
+                            ready=true;
+                            }
+            debugSerial<<"CAN: initialized. addr="<<controllerId<<endl;
+            return true;
+             }
+
+int canDriver::readFrame()
+{
+ if (!ready) return -1;
+                //STM32 
+               #if defined(ARDUINO_ARCH_STM32)
+               if (STMCan.read(CAN_RX_msg)) 
+               {
+                if (CAN_RX_msg.len>8) CAN_RX_msg.len=8;
+                memcpy(RXpacket.data, CAN_RX_msg.buf,CAN_RX_msg.len);
+                RXlen = CAN_RX_msg.len;
+                RXid.id  = CAN_RX_msg.id;
+                return RXlen;
+               }
+               #endif
+
+               #if defined(ARDUINO_ARCH_ESP32) 
+            // try to parse packet
+            int packetSize = CAN.parsePacket();
+
+            if (packetSize ){//|| CAN.packetId() != -1) {
+                // received a packet
+                debugSerialPort.print("CAN: Received ");
+
+                if (CAN.packetExtended()) {
+                debugSerialPort.print("extended ");
+                }
+
+                if (CAN.packetRtr()) {
+                // Remote transmission request, packet contains no data
+                debugSerialPort.print("RTR ");
+                }
+
+                debugSerialPort.print("packet with id 0x");
+                debugSerialPort.print(CAN.packetId(), HEX);
+
+                if (CAN.packetRtr()) {
+                debugSerialPort.print(" and requested length ");
+                debugSerialPort.println(CAN.packetDlc());
+                } else {
+                debugSerialPort.print(" and length ");
+                //debugSerialPort.println(packetSize);
+                debugSerialPort.println(CAN.packetDlc());
+
+                
+                // only print packet data for non-RTR packets
+                RXlen=0;
+                while (CAN.available()) {
+                    RXpacket.data[RXlen++]=CAN.read();
+                    if (RXlen>=8) break;
+                }
+                RXid.id = CAN.packetId();
+
+                debugSerialPort.println();
+                return RXlen;
+                }
+               }
+                #endif
+
+
+                //DUE
+                #if defined(__SAM3X8E__)
+                CAN_FRAME CAN_RX_msg;
+                if (Can0.available() > 0) {
+                                            
+                                                Can0.read(CAN_RX_msg); 
+                                                if (CAN_RX_msg.length>8) CAN_RX_msg.length=8;
+                                                memcpy(RXpacket.data, CAN_RX_msg.data.bytes,CAN_RX_msg.length);
+                                                RXlen = CAN_RX_msg.length;
+                                                RXid.id  = CAN_RX_msg.id;
+                                                return RXlen;
+                                            } 
+
+                #endif
+
+        return -1;
+}
+
+void canDriver::Poll()
+            {  
+
+if (readFrame()>=0) processPacket( RXid, &RXpacket, RXlen);
+//State machine
+
+switch (state)
+{
+    case canState::MACLookup:
+   // case canState::FrameRequested:
+
+    if (isTimeOver(responseTimer,millis(),1000UL)) 
+                            {
+                            responseTimer=millisNZ();
+                            state=canState::Error;
+                            errorSerial<<"CAN: lookup Timeout"<<endl;
+                            }
+    break;
+
+    case canState::Error:
+        if (configLoaded) state=canState::ConfigLoaded;
+           else 
+                if (isTimeOver(responseTimer,millis(),10000UL)) 
+                     lookupMAC();
+    break;
+
+    case canState::ReadConfig:
+    {
+    //Blocking read config
+    if (configLocked) return; // only in safe moments
+    configLocked++;
+
+    infoSerial<<F("CAN: Requesting Config")<<endl;
+
+    CANConfStream.open(controllerId,payloadType::configFrame,'r');
+
+    if (CANConfStream.peek() == '{') {
+                debugSerial<<F("CAN: JSON detected")<<endl;
+                cleanConf(1);
+                aJsonStream as = aJsonStream(&CANConfStream);
+                root = aJson.parse(&as);
+                CANConfStream.close();
+                if (!root) {
+                    errorSerial<<F("CAN: config load failed")<<endl;
+                    sysConf.setETAG("");
+                //    sysConfStream.close();
+                    configLocked--;
+                    state = canState::Error;
+                    return;
+                }
+                infoSerial<<F("CAN: config Loaded")<<endl;
+                configLocked--;
+                cmdFunctionSave(0,NULL);
+                if (applyConfig()) ;
+      //                  debugSerial.print(aJson.print(root,false));
+                sysConf.loadETAG();
+                state = canState::Idle;
+                return ;
+            } 
+            CANConfStream.close();   
+            infoSerial<<F("CAN: Config not loaded")<<endl; 
+            state = canState::Error;
+            configLocked--;
+    }        
+    break;
+
+//    case canState::Idle:
+
+}
+}
+
+bool canDriver::processPacket(canid_t id, datagram_t *packet, uint8_t len, bool rtr)
+{
+
+debugSerial.print("CAN: Rcvd ");
+debugSerial.print(len);
+debugSerial.print(" bytes id:");
+debugSerial.println(id.id,HEX);
+
+//if (id.deviceId && (id.deviceId != controllerId) && !id.status) return false;
+
+debugSerial<<"CAN: " ;
+if (id.status) debugSerial.print("Resp "); else debugSerial.print("Req ");
+debugSerial<<"(devId:"<< id.deviceId <<" ";
+switch ((id.payloadType)){
+    case payloadType::itemCommand:
+    debugSerial.print("itemCmd");
+    debugSerial<<" itemId:"<< id.itemId;
+    if (id.subItemId!=NO_SUBITEM) debugSerial << " subItem:"<<id.subItemId;
+    
+    if (id.deviceId && (id.deviceId != controllerId) && !id.status) //ignore requests with NON ZERO devId where another CANID
+                        {
+                           debugSerial.println(")");
+                           return false; 
+                        }    
+
+    break;
+    case payloadType::lookupMAC:
+    debugSerial.print("lookupMAC");
+    if (id.status && (memcmp(packet->mac, sysConf.mac,6)))  //Ignore responses for another controller
+                        {
+                           debugSerial.println(")");
+                           return false; 
+                        }
+    break;
+    case payloadType::configFrame:
+    debugSerial.print("configFrame #");
+    debugSerial<< id.subjId;
+    if (id.status && (id.deviceId != controllerId)) //Ignore responses on config request not for me
+                        {
+                           debugSerial.println(")");
+                           return false; 
+                        }
+
+    break;
+    case payloadType::OTAFrame:
+    debugSerial.print("OTAFrame #");
+      debugSerial<< id.subjId;
+    break;
+    case payloadType::auth:
+    debugSerial.print("auth #");
+    debugSerial<< id.subjId;
+    break;
+    case payloadType::metric:
+    debugSerial.print("metric #");
+    debugSerial<< id.subjId;
+    break;
+    case payloadType::sysCmd:
+    debugSerial.print("sysCmd");
+     if (id.deviceId != controllerId) //Ignore commands not for me
+                        {
+                           debugSerial.println(")");
+                           return false; 
+                        }
+
+    break;
+    case payloadType::rawPinCtrl:
+    debugSerial.print("rawPinCtrl");
+     if (id.deviceId != controllerId) //Ignore commands not for me
+                        {
+                           debugSerial.println(")");
+                           return false; 
+                        }    
+}
+debugSerial<< ") ";
+
+if (len) printFrame(packet,len);
+if (id.status){
+    //Responces
+    //@ any state
+    switch (id.payloadType)
+    {
+        case payloadType::itemCommand:
+        {
+        if (len!=8) return false;    
+        aJsonObject  *confObj = getConfbyID(id.deviceId);
+        if (confObj)
+            {
+                debugSerial<<F("CAN: status received for dev ")<<id.deviceId<<endl;
+                //char * itemNName = findItemName(id.itemId);
+                aJsonObject  *itemsObj = aJson.getObjectItem(confObj,"items");
+                if (!itemsObj) return false;
+                Item it(id.itemId, id.subjId, itemsObj);
+                if (it.isValid())
+                    {
+                        itemCmd ic;
+                        uint16_t flags = 0;
+                        ic.cmd = packet->cmd;
+                        ic.param = packet->param;
+
+                        debugSerial<<F("CAN: item ")<<it.itemArr->name<<" ";
+                        ic.debugOut();
+                        
+                        if (ic.isValue()) flags |= FLAG_PARAMETERS;
+                        if (ic.getSuffix()==S_DELAYED) flags |= FLAG_SEND_DELAYED;
+                           else if (ic.isCommand()) flags |= FLAG_COMMAND;
+
+                        ic.saveItem(&it,flags);
+                        it.SendStatusImmediate(ic,flags | FLAG_NOT_SEND_CAN, it.getSubItemStrById(id.subItemId));
+                        return true;
+                    }
+
+            }
+
+        }    
+        break;
+        
+    }
+
+    switch (state)
+    {
+        case canState::MACLookup:
+        if ((id.payloadType == payloadType::lookupMAC))
+           {
+                if (root && (id.subjId == confCRC)) ///?
+                    {
+                        infoSerial << (F("Valid config already onboard")) << endl;
+                        state = canState::Idle;
+                    }
+                else 
+                    {
+                        infoSerial<<"\nCAN: Got Controller addr: "<<id.deviceId<<endl;
+                        state = canState::ReadConfig;
+                        controllerId=id.deviceId;
+                    }
+           }
+        return true; 
+
+        case canState::FrameRequested:
+        if ((id.payloadType == payloadType::configFrame) && (id.deviceId == controllerId))
+          {
+                errorSerial<<F("CAN: Config received when not expected")<<endl;
+          }
+
+        break;
+        case canState::Idle:
+
+        break;
+
+        case canState::Error:
+        return false;
+    }
+}   
+else //Requests
+    {
+        /*
+            switch (id.payloadType)
+    {
+            case payloadType::itemCommand:
+            break;
+
+            case payloadType::sysCmd:
+            break;
+        
+    }*/
+        if ((id.payloadType == payloadType::itemCommand) && (len ==8))
+            {
+                Item it(id.itemId,id.subItemId);
+                if (it.isValid())
+                    {
+                        itemCmd ic;
+                        ic.cmd = packet->cmd;
+                        ic.param = packet->param;
+                        //debugSerial<<F("CAN: itemCmd: ");
+                        //ic.debugOut();
+                        return it.Ctrl(ic,it.getSubItemStrById(id.subItemId));
+                    }
+               return false;
+            }
+        else if ((id.payloadType == payloadType::lookupMAC) && (len>=6))
+            {             
+               return sendRemoteID(packet->mac);
+               //debugSerial<<"ID requested"<<endl;
+            }
+        else if ((id.payloadType == payloadType::configFrame) && (id.subjId == 0xFFFF))
+            {  
+                debugSerial<<F("CAN: Requested conf for dev#")<<id.deviceId<<endl;
+                aJsonObject * remoteConfObj = getConfbyID(id.deviceId);
+                if (remoteConfObj)
+                {
+                        infoSerial<<F("CAN: Sending conf for dev#")<<id.deviceId<<endl;
+                        CANConfStream.open(id.deviceId,payloadType::configFrame,'w');
+                        aJsonStream outStream = aJsonStream(&CANConfStream);
+                        aJson.print(remoteConfObj, &outStream); 
+                        CANConfStream.close();
+                }
+
+               return 1;
+               //debugSerial<<"ID requested"<<endl;
+            }
+
+    }
+return false;
+}
+
+uint8_t canDriver::getMyId()
+{
+if (!canConfigObj) return 0;
+aJsonObject * addrObj = aJson.getObjectItem(canConfigObj, "addr");
+if (addrObj && (addrObj->type == aJson_Int)) return addrObj->valueint;
+return 0;
+}
+
+aJsonObject * canDriver::getConfbyID(uint8_t devId)
+{
+if (!canConfigObj) return NULL;
+if (!canRemoteConfigObj || canRemoteConfigObj->type != aJson_Object) return NULL;
+aJsonObject * remoteConfObj=canRemoteConfigObj->child; 
+while (remoteConfObj)
+    {  
+        aJsonObject * remoteCanObj =  aJson.getObjectItem(remoteConfObj, "can");
+        if (remoteCanObj)
+        {
+        aJsonObject * addrObj = aJson.getObjectItem(remoteCanObj, "addr");
+        if (addrObj && (addrObj->type == aJson_Int) && (addrObj->valueint == devId)) return remoteConfObj;
+        }
+        remoteConfObj=remoteConfObj->next;
+    }
+return NULL;    
+}
+
+aJsonObject * canDriver::findConfbyName(char* devName, int * devAddr)
+{
+if (!canRemoteConfigObj || canRemoteConfigObj->type != aJson_Object || !devName ) return NULL;
+aJsonObject * remoteConfObj=canRemoteConfigObj->child; 
+while (remoteConfObj)
+    {  
+        aJsonObject * remoteCanObj =  aJson.getObjectItem(remoteConfObj, "can");
+        if (remoteCanObj)
+        {
+        aJsonObject * nameObj = aJson.getObjectItem(remoteCanObj, "name");
+        if (nameObj && (nameObj->type == aJson_String) && nameObj->valuestring && (strncasecmp(nameObj->valuestring,devName,strlen(nameObj->valuestring)) == 0)) 
+         {   
+            if (devAddr) 
+            {
+              aJsonObject * addrObj = aJson.getObjectItem(remoteCanObj, "addr");
+              if (addrObj && (addrObj->type == aJson_Int)) *devAddr=addrObj->valueint;
+            }
+            return remoteConfObj;
+         }    
+        }
+        remoteConfObj=remoteConfObj->next;
+    }
+return NULL;    
+}
+
+#if not defined (NOIP)   
+extern PubSubClient mqttClient;
+
+bool canDriver::subscribeTopics(char * root, size_t buflen)
+{
+ if (!root) return false;   
+ if (!canRemoteConfigObj || canRemoteConfigObj->type != aJson_Object) return false;
+
+ int rootLen = strlen(root);     
+
+aJsonObject * remoteConfObj=canRemoteConfigObj->child; 
+while (remoteConfObj)
+    {  
+        aJsonObject * remoteCanObj =  aJson.getObjectItem(remoteConfObj, "can");
+        if (remoteCanObj)
+        {
+        aJsonObject * addrObj = aJson.getObjectItem(remoteCanObj, "name");
+        if (addrObj && (addrObj->type == aJson_String) && addrObj->valuestring)
+                {
+                    strncpy(root+rootLen, addrObj->valuestring, buflen-rootLen-1);
+                    strncat(root+rootLen, "/", buflen-rootLen-1);
+                    strncat(root+rootLen, "#", buflen-rootLen-1);
+                    debugSerial.println(root);
+                    mqttClient.subscribe(root);                
+                }   
+        }
+        remoteConfObj=remoteConfObj->next;
+    }
+}
+#endif
+
+uint8_t canDriver::getIdByMac(macAddress mac)
+{
+char macStr[19];
+uint8_t strptr = 0;
+
+if (!canRemoteConfigObj) return 0;
+memset(macStr,0,sizeof(macStr));
+for (byte i = 0; i < 6; i++)
+        {
+        SetBytes(&mac[i],1,&macStr[strptr]);
+        strptr+=2;
+        if (i < 5) macStr[strptr++]=':';
+        }
+debugSerial<<F("CAN: Searching devId for ")<<macStr<<endl;
+aJsonObject * remoteConfObj =  aJson.getObjectItem(canRemoteConfigObj, macStr);
+
+if (!remoteConfObj) return 0;
+
+aJsonObject * remoteCanObj = aJson.getObjectItem(remoteConfObj, "can");
+ if (!remoteCanObj) return 0;
+
+aJsonObject * addrObj = aJson.getObjectItem(remoteCanObj, "addr");
+ if (!addrObj) return 0;
+if (addrObj && (addrObj->type == aJson_Int)) 
+            {
+            debugSerial<<F("CAN: find dev#")<< addrObj->valueint << endl;   
+            return addrObj->valueint;
+            }
+
+return 0;
+}
+
+bool canDriver::write(uint32_t msg_id, datagram_t * buf, uint8_t size)
+            {   //
+                if (!ready) {
+                            errorSerial<<"CAN: not initialized"<<endl;
+                            return false;
+                            }
+                bool res;
+                if (size>8) size = 8;
+
+                //STM32 
+                #if defined(ARDUINO_ARCH_STM32)
+                //if (!Can) return 0;
+                if (buf) for(uint8_t i=0;i<size; i++) CAN_TX_msg.buf[i]=buf->data[i];
+                CAN_TX_msg.id = msg_id;
+                CAN_TX_msg.flags.extended = 1;  // To enable extended ID
+                CAN_TX_msg.len=size;
+                if (res=STMCan.write(CAN_TX_msg)) debugSerial<<("CAN: Wrote ")<<size<<" bytes, id "<<_HEX(msg_id)<<endl;
+                    else debugSerial.println("CAN: Write error");
+                return res;    
+                #endif
+
+                //ESP
+                #if defined(ARDUINO_ARCH_ESP32)
+                CAN.beginExtendedPacket(msg_id,size);
+                CAN.write(buf->data,size);
+                //for(uint8_t i=0;i<size; i++) CAN.write(buf[i]);
+                if (res=CAN.endPacket()) debugSerial<< ("CAN: Wrote ")<<size << " bytes, id "<<_HEX(msg_id)<<endl;
+                    else debugSerial.println("CAN: Write error");
+                return res;
+                #endif
+
+                #if defined(__SAM3X8E__)
+                CAN_FRAME CAN_TX_msg;
+	            CAN_TX_msg.id = msg_id;
+                CAN_TX_msg.extended = true;
+                CAN_TX_msg.length=size;
+                //outgoing.priority = 4; //0-15 lower is higher priority
+                if (buf) for(uint8_t i=0;i<size; i++) CAN_TX_msg.data.bytes[i]=buf->data[i];
+                res=Can0.sendFrame(CAN_TX_msg);
+                if (res) debugSerial<<("CAN: Wrote ")<<size<<" bytes, id "<<_HEX(msg_id)<<endl;
+                                                    else debugSerial.println("CAN: Write error");
+                return res;
+                #endif
+        }
+    
+
+
+
+
+bool canDriver::sendStatus(uint16_t itemNum, itemCmd cmd, int subItem)
+{
+ if (!itemNum) return false;
+ return sendCommand(controllerId, itemNum, cmd, true, subItem);
+}
+
+bool canDriver::sendCommand(aJsonObject * can, itemCmd cmd, bool status)
+{    
+     if (can && (can->type == aJson_Array))
+       {
+        int subItem=NO_SUBITEM;
+        aJsonObject * dev = aJson.getArrayItem(can,0);
+        aJsonObject * it = aJson.getArrayItem(can,1);
+        aJsonObject * sfx = aJson.getArrayItem(can,2);
+        aJsonObject * subItemObj = aJson.getArrayItem(can,3);
+        if (sfx)
+            switch (sfx->type)
+            {
+             case  aJson_Int: cmd.setSuffix(sfx->valueint);
+             break;
+             case  aJson_String:
+             int suffix=txt2subItem(sfx->valuestring);
+             if (suffix) cmd.setSuffix(suffix);
+            }
+         if (subItemObj && subItemObj->type==aJson_Int && subItemObj->valueint>=0 && subItemObj->valueint<63) subItem=subItemObj->valueint;
+
+        if (dev && it && dev->type == aJson_Int && it->type == aJson_Int)
+            return sendCommand(dev->valueint, it->valueint, cmd, status,subItem); 
+       }  
+      return false;  
+}
+
+bool canDriver::sendCommand(uint8_t devID, uint16_t itemID,itemCmd cmd, bool status,int subItemID )
+{
+    canid_t id;
+ datagram_t packet;
+ bool       res;
+
+
+ id.reserve=0;
+ id.status=status?1:0;
+ id.payloadType=payloadType::itemCommand;  
+ id.deviceId=devID;
+ id.itemId=itemID;
+ id.subItemId=subItemID;
+ 
+ packet.cmd = cmd.cmd;
+ packet.param = cmd.param;
+ 
+ debugSerial << ((status)?"CAN: send Status":"CAN: send Command");
+ debugSerial<<F(" ->[")<<devID<<":"<<itemID<<"] "; 
+ if (subItemID!=NO_SUBITEM)  debugSerial<<F("Subitem:")<<subItemID<<" "; 
+ cmd.debugOut();
+
+  res=write (id.id,&packet,8);
+
+ //if (res) debugSerial<<F("CAN: sent ok")<<endl;
+ //   else  debugSerial<<F("CAN: fail")<<endl;
+
+ return res;
+}
+
+
+
+////////////////////////////// Steream //////////////////////////
+
+
+    int canStream::send(uint8_t len, uint16_t _seqNo)
+    {  
+                    canid_t id;
+                    datagram_t packet;
+                    bool       res;
+                    if (!driver) return 0;
+                    id.reserve=0;
+                    id.status=1;
+                    id.payloadType=pType;  
+                    id.deviceId=devId;
+                    id.subjId=_seqNo; 
+
+                    res=driver->write (id.id, &writeBuffer, len);
+                    writePos=0;
+                    if (res) 
+                            {
+                            //Await check?    
+                            return 1; 
+                            }
+                       else return 0; 
+    }               
+
+     int canStream::checkState() 
+     {
+      bool res = false;  
+      if (!driver) return -1;
+        switch (state)
+        {
+            case canState::StreamOpenedRead:
+                       readPos = 0;
+                       res= driver->requestFrame(devId,pType,seqNo); //Requesting frame; 
+                       if (res)
+                            state = canState::FrameRequested;    
+                          else   
+                            {
+                            state = canState::Error;       
+                            return -1;  
+                            }    
+            if (seqNo ==0xFFFF) seqNo =0;                          
+            //continue 
+
+            case canState::FrameRequested:    
+            { 
+              int c;
+
+              uint32_t timer = millis();  
+              do {
+                    //debugSerial.print(".");
+                    yield();
+                    
+                    if ((c=driver->readFrame()>0) && (driver->RXid.deviceId == devId) && (driver ->RXid.payloadType == pType) && driver->RXid.status)   
+                           {
+                            state = canState::FrameReceived; 
+                            debugSerial<<F("CAN: Payload received ")<< c << "|" <<driver->RXlen<< " "<<driver->RXpacket.payload<<"#"<<driver->RXid.subjId<<endl;
+                            seqNo=driver->RXid.subjId;
+                            failedCount=0;
+                            return driver->RXlen; 
+                           }
+
+                 } while((!isTimeOver(timer,millis(),1000UL)) );
+                
+                debugSerial<<F("CAN: RX data awaiting timeout #")<<failedCount<<endl;   
+                if (failedCount>=3) 
+                        {
+                            state = canState::Error;       
+                            return -1;  
+                        }
+
+                failedCount++;
+                state = canState::StreamOpenedRead; 
+            }    
+            return -1;
+            break;
+
+            case canState::FrameReceived:
+               return driver->RXlen; 
+            break;    
+
+            case canState::waitingConfirm:    
+              if (driver->readFrame()>=0) 
+                        {
+                        if (
+                            (driver->RXid.deviceId == devId)  &&
+                            (driver->RXid.payloadType == pType) &&
+                            (driver->RXid.status == 0)
+                           )
+                        {   
+                        debugSerial<<F("CAN: frame confirmed #")<<driver->RXid.subjId<<endl;   
+                        if (seqNo == driver->RXid.subjId)
+                                {
+                                 state = canState::StreamOpenedWrite;
+                                 seqNo++;
+                                }
+                         else
+                                {
+                                    state = canState::Error;
+                                    errorSerial<<F("CAN: wrong seqNum")<<endl;
+                                    return -1;
+                                }       
+
+                        }
+                        
+                        return 0; 
+                        }
+              return driver->RXlen; 
+            break;
+
+            case canState::Idle:
+               return -1;
+            break;           
+        }
+     return -1;
+     };
+
+
+
+    // Stream methods
+     int canStream::available() 
+     {
+        if (!driver) return -1;
+        int avail = checkState();
+        return avail;      
+     };
+
+     int canStream::read() 
+     {  
+        if (!driver) return -1;
+        int avail = checkState();
+        int ch;
+       if (avail>=0) 
+                {   
+                 ch = driver->RXpacket.data[readPos++];
+                 if (readPos>=8) state = canState::StreamOpenedRead;
+                 return ch;
+                }
+           else return -1;
+     };
+
+     int canStream::peek() 
+     {
+        if (!driver) return -1;
+        int avail = checkState();
+        int ch;
+       if (avail>=0) 
+                {   
+                 ch = driver->RXpacket.data[readPos];
+                 return ch;
+                }
+           else return -1;
+     };
+
+
+
+      size_t canStream::write(uint8_t c) 
+    { 
+        //if ((state != canState::StreamOpenedWrite) || (state != canState::waitingConfirm)) return -1;
+
+        uint32_t timer = millis();
+        do 
+         {
+         checkState();
+         yield();
+         //debugSerial.print("*");
+         if (isTimeOver(timer,millis(),1000UL))
+            {
+                 state = canState::Error;
+                 errorSerial<<F("CAN: write timeout")<<endl;
+                 return -1;
+            }            
+
+         }
+        while (!availableForWrite() );
+
+        writeBuffer.data[writePos++]=c;
+        if (writePos>=8) 
+            {
+                bool res = send(8,seqNo);
+                if (res) state = canState::waitingConfirm;
+                    else state = canState::Error;
+                return res;
+            }
+         return 1; };
+
+           void canStream::flush() 
+             { 
+                send(writePos,seqNo);
+             };
+
+
+ int canStream::availableForWrite()
+{
+ switch (state)
+ {
+    case canState::waitingConfirm: return 0;
+ }   
+return 1;
+}
+#endif 

lighthub/candriver.h

@@ -0,0 +1,237 @@
+#pragma once
+#define NO_SUBITEM 63
+#ifdef  CANDRV
+
+#if defined(ARDUINO_ARCH_STM32)
+#if !defined(HAL_CAN_MODULE_ENABLED)
+#define HAL_CAN_MODULE_ENABLED
+#endif
+#include <STM32_CAN.h>
+#endif
+
+#include <itemCmd.h>
+
+#include <Stream.h>
+#include <aJSON.h>
+#include <streamlog.h>
+//#include <config.h> NO!
+
+typedef uint8_t macAddress[6];
+#pragma pack(push, 1)
+typedef union 
+{
+  uint32_t id;
+  struct 
+  {   union
+     {
+        struct
+         {
+           uint16_t subItemId:6;
+           uint16_t itemId:10; 
+          };
+      uint16_t subjId;    
+      };
+      uint8_t deviceId;
+      uint8_t payloadType:4;
+      uint8_t status:1; 
+      uint8_t reserve:3; //0
+
+  };
+} canid_t;
+
+
+enum payloadType
+{   unknown=0,
+    itemCommand=1,
+    lookupMAC=2,
+    configFrame=3,
+    OTAFrame=4,
+    auth=5,
+    metric=6,
+    sysCmd=7,
+    rawPinCtrl=8
+};
+
+enum metricType
+{
+    MAC=1,
+    IP=2,
+    NetMask=3,
+    GW=4,
+    DNS=5,
+    UpTime=6,
+    Salt=7
+};
+
+enum commandType
+{
+    reboot=1,
+    get=2,
+    save=3,
+    load=4
+};
+
+
+#define MAXCANID 0x1FFFFFFF
+// Request item status: id.status=1;deviceId=[0xFF | deviceId];itemId=x; RTR bit=true 
+// Request on config: id.status=0;deviceId=0;itemId=x payload.mac=mac;crc16=crc_current_config 
+
+
+
+typedef union {
+    uint8_t data[8];
+    char payload[8];
+    struct {
+     itemCmdStore      cmd;       
+     itemArgStore      param;       
+    };
+    struct {
+      macAddress        mac;
+      uint16_t          currentConfCRC;       
+    };    
+    struct {
+      uint8_t           sysCmd;       
+      uint8_t           sysCmdData[7];        
+    };    
+    struct {
+      uint32_t   metric1;       
+      uint32_t   metric2;      
+    };
+} datagram_t;
+
+
+enum canState
+{
+stateUnknown,
+MACLookup,
+Idle,
+StreamOpenedWrite,
+StreamOpenedRead,
+FrameRequested,
+FrameReceived,
+ReadConfig,
+ConfigLoaded,
+waitingConfirm,
+Error
+};
+#pragma pack(pop)
+
+class canDriver 
+{
+public:
+canDriver(){ready=false; controllerId=0; responseTimer=0; state=canState::stateUnknown;canConfigObj=NULL;canRemoteConfigObj=NULL;confCRC=0xFFFF;};
+uint8_t getMyId();
+bool sendStatus(uint16_t itemNum, itemCmd cmd, int subItem = NO_SUBITEM);
+bool sendCommand(uint8_t devID, uint16_t itemID, itemCmd cmd, bool status=false, int subItemID=NO_SUBITEM );
+bool sendCommand(aJsonObject * can,itemCmd cmd, bool status = false);
+bool upTime(uint32_t ut);
+bool salt(uint32_t salt);
+bool lookupMAC();
+bool requestFrame(uint8_t devId, payloadType _payloadType, uint16_t seqNo );
+int  readFrame();
+bool sendRemoteID(macAddress mac);
+bool begin();
+void Poll();
+bool processPacket(canid_t id, datagram_t *packet, uint8_t len, bool rtr=false);
+bool write(uint32_t msg_id, datagram_t * buf = NULL, uint8_t size=0);    
+aJsonObject * findConfbyName(char* devName, int * devAddr=NULL);
+#if not defined (NOIP)   
+bool subscribeTopics(char * root, size_t buflen);
+#endif
+
+uint8_t getControllerID(){return controllerId;};    
+uint8_t getIdByMac(macAddress mac);
+aJsonObject * canConfigObj;
+aJsonObject * canRemoteConfigObj;
+uint16_t confCRC;
+    datagram_t RXpacket;
+    canid_t RXid;
+    uint8_t RXlen;
+
+private:
+   aJsonObject * getConfbyID(uint8_t devId);
+
+    #if defined(ARDUINO_ARCH_STM32)
+    CAN_message_t CAN_RX_msg;
+    CAN_message_t CAN_TX_msg;
+    #endif
+
+    #if defined(__SAM3X8E__)
+    //CAN_FRAME CAN_RX_msg;
+    #endif
+
+    bool ready;
+    
+
+
+    uint8_t controllerId;
+    canState state;
+    uint32_t responseTimer;
+
+};
+
+
+
+extern aJsonObject * topics;
+
+class canStream : public Stream
+{
+public:
+    canStream(canDriver * _driver) : readPos(0),writePos(0),devId(0), pType(payloadType::unknown),state(canState::stateUnknown),seqNo(0),failedCount(0){driver=_driver; }
+    int open(uint8_t controllerID, payloadType _pType, char _mode) 
+                {  
+                    if (mode) close();
+                    devId=controllerID; 
+                    pType = _pType; 
+                    mode = _mode;
+                    seqNo=0xFFFF;
+                    failedCount=0;
+                    if (mode == 'w') state=canState::StreamOpenedWrite;
+                        else state=canState::StreamOpenedRead;
+                    return 1;
+                    }; 
+    int close ()
+                {
+                    if ((mode == 'w') && writePos) flush();
+                    mode = '\0';
+                    state=canState::stateUnknown;
+                    return 1;
+                }
+
+
+    // Stream methods
+    virtual int available();
+    virtual int read();
+    virtual int peek();
+
+    virtual void flush();
+    // Print methods
+    virtual size_t write(uint8_t c) ;
+    virtual int availableForWrite();
+    
+
+
+private:
+    int send(uint8_t len, uint16_t _seqNo);
+    int checkState();
+    canDriver * driver;
+    unsigned int readPos;
+    unsigned int writePos;
+
+    datagram_t writeBuffer;
+
+    uint8_t devId;
+    uint16_t seqNo;
+    int8_t failedCount;
+    char mode;
+    payloadType pType;   
+    canState state; 
+    //bool writeBlocked;
+};
+
+
+
+
+
+
+#endif // 

lighthub/dmx.cpp

@@ -47,6 +47,7 @@ volatile uint32_t checkTimestamp=0L;
 #if defined(_dmxin)
 volatile uint32_t D_State=0;
 volatile unsigned long D_checkT=0;
+uint8_t DMXINChannels=0;
 #endif
 
 #ifdef _artnet
@@ -61,6 +62,61 @@ extern aJsonObject *items;
 extern aJsonObject *dmxArr;
 
 
+
+itemCmd rgb2hsv(itemCmd in)
+{
+    itemCmd         out;
+    out.setArgType(ST_HSV255);
+
+    double      min, max, delta;
+    
+    double inr=in.param.r/255;
+    double ing=in.param.g/255;
+    double inb=in.param.b/255;
+    double inw=in.param.w/255; 
+
+    min = inr < ing ? inr : ing;
+    min = min  < inb ? min  : inb;
+
+    max = inr > ing ? inr : ing;
+    max = max  > inb ? max  : inb;
+    max = max  > inw ? max  : inw;
+
+    out.param.v = max*255;                                // v
+    delta = max - min;
+    if (delta < 0.00001)
+    {
+        out.param.s = 0;
+        out.param.h = 0; // undefined, maybe nan?
+        return out;
+    }
+    if( max > 0.0 ) { // NOTE: if Max is == 0, this divide would cause a crash
+        out.param.s = (delta / max)*100;                  // s
+    } else {
+        // if max is 0, then r = g = b = 0              
+        // s = 0, h is undefined
+        out.param.s = 0;
+        out.param.h = 0;                            // its now undefined
+        return out;
+    }
+    double outh;
+    if( inr >= max )                           // > is bogus, just keeps compilor happy
+        outh = ( ing - inb ) / delta;        // between yellow & magenta
+    else
+    if( ing >= max )
+        outh = 2.0 + ( inb - inr ) / delta;  // between cyan & yellow
+    else
+        outh = 4.0 + ( inr - ing ) / delta;  // between magenta & cyan
+
+    outh *= 60.0;                              // degrees
+
+    if( outh < 0.0 )
+        outh += 360.0;
+    out.param.h=outh;
+    return out;
+}
+
+
 int itemCtrl2(char* name,int r,int g, int b, int w)
 {
   if (!items) return 0;
@@ -68,7 +124,6 @@ int itemCtrl2(char* name,int r,int g, int b, int w)
 
        if (itemArr && (itemArr->type==aJson_Array))
        {
-
         short itemtype = aJson.getArrayItem(itemArr,0)->valueint;
         short itemaddr = aJson.getArrayItem(itemArr,1)->valueint;
        switch (itemtype){
@@ -84,7 +139,6 @@ int itemCtrl2(char* name,int r,int g, int b, int w)
 
        case CH_RGB: // RGB
       {
-
         DmxWrite(itemaddr,   r);
         DmxWrite(itemaddr+1, g);
         DmxWrite(itemaddr+2, b);
@@ -96,7 +150,7 @@ int itemCtrl2(char* name,int r,int g, int b, int w)
         if (groupArr && (groupArr->type==aJson_Array))
         { aJsonObject *i =groupArr->child;
           while (i)
-            { //Serial.println(i->valuestring);
+            {
             if (i->type == aJson_String) itemCtrl2(i->valuestring,r,g,b,w);
               i=i->next;}
         }
@@ -119,9 +173,34 @@ void DMXImmediateUpdate(short tch,short r, short g, short b, short w) {
         }
 }
 
-void DMXSemiImmediateUpdate(short tch,short trh, int val)
+void DMXSemiImmediateUpdate(short tch,short r, short g, short b, short w)
 {
 //Here any code for  passthrow between DMX IN and DMX OUT in idle state
+       if (dmxArr && (dmxArr->type==aJson_Array))
+
+        {
+        aJsonObject *DMXch =   aJson.getArrayItem(dmxArr,tch);
+        char* itemname = NULL;
+        if (DMXch->type == aJson_String) itemname=DMXch->valuestring;
+         if (itemname)
+          {
+            Item it(itemname);
+            if (!r && !g && !b && !w) it.Ctrl(itemCmd().Cmd(CMD_OFF).setSuffix(S_CMD));
+               else 
+                  {
+                    /*
+                  CRGB rgb;
+                  rgb.r = r;
+                  rgb.g = g;
+                  rgb.b = b;    
+                  CHSV hsv = rgb2hsv_approximate(rgb);  
+                  it.Ctrl(itemCmd().HSV255(hsv.h,hsv.s,hsv.v).setSuffix(S_SET)); */
+                  it.Ctrl(itemCmd().RGBW(r,g,b,w).setSuffix(S_SET));
+                  //it.Ctrl(rgb2hsv(itemCmd().RGBW(r,g,b,w)).setSuffix(S_SET));
+                  it.Ctrl(itemCmd().Cmd(CMD_ON).setSuffix(S_CMD));
+                  }
+          }
+        }
 }
 
 void DMXput(void)
@@ -132,6 +211,7 @@ for (short tch=0; tch<=3 ; tch++)
     short base = tch*4;
     DMXImmediateUpdate(tch,DMXin[base],DMXin[base+1],DMXin[base+2],DMXin[base+3]);
     }
+    
 };
 
 extern volatile uint8_t timerHandlerBusy;
@@ -140,81 +220,62 @@ extern volatile uint8_t timerHandlerBusy;
 volatile int DMXinDoublecheck=0;
 #endif
 
+// INVOKED BY INTERRUPTS - MUST BE SAFE CODE
 void DMXUpdate(void)
 {
 #if defined(_dmxin)
-int t;
 if(!DMXin) return;
-
 #if defined(__SAM3X8E__)
-if (dmxin.getRxLength()<16) return;
+if (dmxin.getRxLength()<DMXINChannels) return;
 #endif
-for (short tch=0; tch<=3 ; tch++)
+
+uint8_t RGBWChannels=DMXINChannels >> 2;
+for (short tch=0; tch<RGBWChannels ; tch++)
     {
     short base = tch*4;
-    bool updated   = 0;
-    bool confirmed = 0;
+    bool updated = false;
+    int t;
 
     for (short trh=0; trh<4 ; trh++)
-    if (((t=dmxin.read(base+trh+1)) != DMXin[base+trh]))
+    if ((t=dmxin.read(base+trh+1)) != DMXin[base+trh])
       {
+        D_State |= (1<<tch);
         updated=1;
-         if (DMXinDoublecheck>2)
-           {
-            D_State |= (1<<tch);
-            DMXin[base+trh]=t;
-            confirmed = 1;
-           }
-      } 
-
-    if (updated) DMXinDoublecheck++; else DMXinDoublecheck=0;
-
-
-     if (confirmed)
+        DMXin[base+trh]=t;
+      }
+     if (updated)
         {
-
         DMXImmediateUpdate(tch,DMXin[base],DMXin[base+1],DMXin[base+2],DMXin[base+3]);
-        //for (int i=1; i<17; i++) {debugSerial.print(dmxin.read(i));debugSerial.print("-");};debugSerial.print("|");
         D_checkT=millisNZ();
         }
     }
-    //Serial.print(D_State,BIN);Serial.println();
 #endif
 }
 
-
- void DMXCheck(void)
+// INVOKED in safe loop
+void DMXCheck(void)
 {
-//  CHSV hsv;
-//  CRGB rgb;
 DMXOUT_propagate();
 #if defined(_dmxin)
-
-short t,tch;
-//Here code for semi-immediate update
-  for (t=1,tch=0; t<=8 ; t<<=1,tch++)
-       if (D_State & t)
-       {
-          // Serial.print(D_State,BIN);Serial.print(":");
-       D_State &= ~t;
-       for (short trh=0; trh<4 ; trh++)
-          DMXSemiImmediateUpdate(tch,trh,DMXin[tch*4+trh]);
-
-       }
-
-//if ((millis()<D_checkT) || (D_checkT==0)) return;
-  if ( (!D_checkT) || (!isTimeOver(D_checkT,millis(),D_CHECKT))) return;
+if ( (!D_checkT) || (!isTimeOver(D_checkT,millis(),D_CHECKT))) return;
 D_checkT=0;
+uint8_t RGBWChannels=DMXINChannels >> 2;
+for (short rgbwChan=0; rgbwChan < RGBWChannels; rgbwChan++)
+    {
+    short base = rgbwChan*4;
+    short bitMask = 1 << rgbwChan;
+       if (D_State & bitMask)
+       {
+       D_State &= ~bitMask;
+       DMXSemiImmediateUpdate(rgbwChan,DMXin[base],DMXin[base+1],DMXin[base+2],DMXin[base+3]);
+       break;
+       }
+    }   
 
-// Here code for network update
-//int ch = 0;
-
-DMXput();
-
-#ifdef _dmxout
-for (int i=1; i<17; i++) {debugSerial.print(dmxin.read(i));debugSerial.print(";");}
-debugSerial.println();
-#endif
+//#ifdef _dmxout
+//for (int i=1; i<17; i++) {debugSerial.print(dmxin.read(i));debugSerial.print(";");}
+//debugSerial.println();
+//#endif
 
 #endif
 }
@@ -238,7 +299,9 @@ void DMXinSetup(int channels)
   //DmxSimple.maxChannel(channels);
 
 #if defined(_dmxin)
+   if (channels>(32*4)) channels = 32*4;
    DMXin = new uint8_t [channels];
+   DMXINChannels=channels;
 #if defined(ARDUINO_ARCH_AVR)
    DMXSerial.init(DMXReceiver,0,channels);
     if (DMXSerial.getBuffer()) {debugSerial.print(F("Init in ch:"));debugSerial.println(channels);} else debugSerial.println(F("DMXin Buffer alloc err"));

lighthub/flashstream.cpp

@@ -237,7 +237,7 @@ NRFFlashStorage EEPROM;
                         {            
                            samBufferPos = 0;
                            EEPROM.write(startPos+pos-sizeof(samBuffer),(byte*)samBuffer,sizeof(samBuffer));     
-                                         
+
                         }
            
                samBuffer[samBufferPos++]=ch;
@@ -287,6 +287,10 @@ NRFFlashStorage EEPROM;
                               putEOF();
                               debugSerial<<F("EOF")<<endl;
                               }
+      #if defined (ARDUINO_ARCH_STM32)
+      eeprom_buffer_flush();
+      #endif                 
+                 
       #if  defined(__SAM3X8E__)
       if (samBufferPos) flush();
       #endif

lighthub/flashstream.h

@@ -56,7 +56,7 @@ unsigned int startPos;
 char openmode ;
 
 public:
-    flashStream():seekableStream(MAX_STREAM_SIZE){openmode = '\0';};
+    flashStream():seekableStream(MAX_STREAM_SIZE),pos(0),startPos(0),openmode('\0'){};
     void setSize(unsigned int _size);
     int open(short fileNum, char mode='\0') ; 
     virtual int open(String _filename, char mode='\0') override;

lighthub/inputs.cpp

@@ -21,7 +21,9 @@ e-mail    anklimov@gmail.com
 #include "inputs.h"
 #include "item.h"
 #include "utils.h"
+#if not defined (NOIP)   
 #include <PubSubClient.h>
+#endif
 #include "main.h"
 #include "itemCmd.h"
 
@@ -33,12 +35,26 @@ e-mail    anklimov@gmail.com
 #endif
 #endif
 
+#ifdef CANDRV
+#include <candriver.h>
+extern canDriver LHCAN;
+#endif
+
 #ifdef MCP23017
 #include "Adafruit_MCP23X17.h"
 Adafruit_MCP23X17 mcp;
 #endif
 
+#ifdef ULTRASONIC
+#define US_TRIG  PA_14   //pin49
+#define US_ECHO  PA_15   //pin50 
+#include "Ultrasonic.h" 
+Ultrasonic ultrasonic(US_TRIG, US_ECHO);
+#endif
+
+#if not defined (NOIP)   
 extern PubSubClient mqttClient;
+#endif
 extern aJsonObject *root;
 extern int8_t ethernetIdleCount;
 extern int8_t configLocked;
@@ -99,6 +115,7 @@ void Input::Parse(aJsonObject * configObj)
     store = NULL;
     inType = 0;
     pin = 0;
+    pin2 =0;
 
     if (!inputObj || !root) return;
     if (!configObj) configObj = inputObj;
@@ -110,10 +127,25 @@ void Input::Parse(aJsonObject * configObj)
         if (itemBuffer) inType = static_cast<uint8_t>(itemBuffer->valueint);
 
         itemBuffer = aJson.getObjectItem(configObj, "#");
-        if (itemBuffer) pin = static_cast<uint8_t>(itemBuffer->valueint);
-           else pin = static_cast<uint8_t>(atoi(configObj->name));
-        }
+        if (itemBuffer) 
+                switch (itemBuffer->type)
+                    {
+                    case aJson_Int:    
+                    pin = static_cast<uint8_t>(itemBuffer->valueint);
+                    
+                    break;   
+                    case aJson_Array:
+                    if ((itemBuffer->child) && (itemBuffer->child->type == aJson_Int)) 
+                        {
+                            pin = static_cast<uint8_t>(itemBuffer->child->valueint);
+                            if ((itemBuffer->child->child) && (itemBuffer->child->child->type == aJson_Int)) 
+                                pin = static_cast<uint8_t>(itemBuffer->child->child->valueint);
+                        }
 
+                    } //switch
+        else pin = static_cast<uint8_t>(atoi(configObj->name));
+
+        }
         // Persistant storage
         itemBuffer = aJson.getObjectItem(inputObj, "@S");
         if (!itemBuffer) {
@@ -127,8 +159,10 @@ void Input::Parse(aJsonObject * configObj)
 
 void cleanStore(aJsonObject * input)
 {
-if (input->type == aJson_Object)  {
+if (input && (input->type == aJson_Object))  {
     // Check for nested inputs
+     Input in(input);
+     in.store->aslong = 0;
     aJsonObject * inputArray = aJson.getObjectItem(input, "act");
     if  (inputArray && (inputArray->type == aJson_Array))
         {
@@ -145,8 +179,8 @@ if (input->type == aJson_Object)  {
         }
     else
     {
-     Input in(input);
-     in.Poll(CHECK_INPUT);
+  //   Input in(input);
+  //   in.store->aslong = 0;
     }
 }
 }
@@ -258,6 +292,14 @@ switch (cause)  {
       break;
     }
     break;
+  case CHECK_ULTRASONIC:
+            switch (inType)
+            {
+                case IN_ULTRASONIC:
+                analogPoll(cause);
+                contactPoll(cause);
+            }
+    break;
     case CHECK_SENSOR: //Slow polling
     switch (inType)
     {
@@ -519,12 +561,13 @@ debugSerial << F("IN:") << pin << F(" DHT22 type. T=") << temp << F("°C H=") <<
 #endif
 
 // TODO Polling via timed interrupt with CHECK_INTERRUPT cause
-bool Input::changeState(uint8_t newState, short cause)
+bool Input::
+changeState(uint8_t newState, short cause)
 {
 if (!inputObj ||  !store) return false;
 
 if (newState == IS_REQSTATE)
-  if (store->delayedState && cause != CHECK_INTERRUPT)
+  if (store->delayedState && (cause != CHECK_INTERRUPT))
     {
       // Requested delayed change State and safe moment
       newState=store->reqState; //Retrieve requested state
@@ -622,6 +665,7 @@ if (newState!=store->state && cause!=CHECK_INTERRUPT) debugSerial<<F("#")<<pin<<
   
   aJsonObject *defaultItem = aJson.getObjectItem(inputObj, "item");
   aJsonObject *defaultEmit = aJson.getObjectItem(inputObj, "emit");  
+  aJsonObject *defaultCan  = aJson.getObjectItem(inputObj, "can");    
 
   if (!defaultEmit && !defaultItem) defCmd.Cmd(CMD_VOID);
 
@@ -637,7 +681,7 @@ if (newState!=store->state && cause!=CHECK_INTERRUPT) debugSerial<<F("#")<<pin<<
   {
     store->state=newState;
     store->delayedState=false;
-    executeCommand(cmd,toggle,defCmd,defaultItem,defaultEmit);
+    executeCommand(cmd,toggle,defCmd,defaultItem,defaultEmit,defaultCan);
     return true;
   }
   else
@@ -656,8 +700,11 @@ if (newState!=store->state && cause!=CHECK_INTERRUPT) debugSerial<<F("#")<<pin<<
 static volatile uint8_t contactPollBusy = 0;
 
 void Input::contactPoll(short cause) {
-    boolean currentInputState;
+    bool currentInputState;
+
     if (!store /*|| contactPollBusy*/) return;
+    if ((inType == IN_ULTRASONIC) && (cause!=CHECK_ULTRASONIC)) return;
+
     contactPollBusy++;
 
     changeState(IS_REQSTATE,cause); //Check for postponed states transitions
@@ -674,9 +721,9 @@ if (inType & IN_I2C)
     currentInputState = (inCache.I2CReadBit(IN_I2C,0,pin) == inputOnLevel);
 else
 #endif
-    if (isAnalogPin(pin) && (mapObj=aJson.getObjectItem(inputObj, "map")) && mapObj->type == aJson_Array)
+    if ((isAnalogPin(pin) || (inType == IN_ULTRASONIC)) && (mapObj=aJson.getObjectItem(inputObj, "map")) && mapObj->type == aJson_Array)
       {
-       int value = inCache.analogReadCached(pin);
+       int value = inCache.analogReadCached(pin,pin2,inType);
        if (value >= aJson.getArrayItem(mapObj, 0)->valueint && value <= aJson.getArrayItem(mapObj, 1)->valueint)
           currentInputState = true;
         else  currentInputState = false;
@@ -791,7 +838,7 @@ if (cause != CHECK_INTERRUPT) switch (store->state) //Timer based transitions
            //     onContactChanged(currentInputState); //Legacy input - to remove later
 
           bool res = true;
-          if (currentInputState)  //Button pressed state transitions
+          if (currentInputState)  //Button pressed state transitions  
 
                 switch (store->state)
                 {
@@ -886,7 +933,7 @@ void Input::analogPoll(short cause) {
 
     pinMode(pin, inputPinMode);
 */
-    inputVal = inCache.analogReadCached(pin);
+    inputVal = inCache.analogReadCached(pin,pin2,inType);
     // Mapping
     if (inputMap && inputMap->type == aJson_Array)
      {
@@ -950,7 +997,8 @@ void Input::onContactChanged(int newValue) {
 
     aJsonObject *item = aJson.getObjectItem(inputObj, "item");
     aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
-    if (!item && !emit) return;
+    aJsonObject *can = aJson.getObjectItem(inputObj,  "can"); 
+    if (!item && !emit && !can) return; 
     aJsonObject *scmd = aJson.getObjectItem(inputObj, "scmd");
     aJsonObject *rcmd = aJson.getObjectItem(inputObj, "rcmd");
     debugSerial << F("LEGACY IN:") << (pin) << F("=") << newValue << endl;
@@ -965,6 +1013,7 @@ void Input::onContactChanged(int newValue) {
                           } else
 #endif
 {
+#if not defined (NOIP)    
 char addrstr[MQTT_TOPIC_LENGTH];
 strncpy(addrstr,emit->valuestring,sizeof(addrstr));
 if (mqttClient.connected() && !ethernetIdleCount)
@@ -979,6 +1028,7 @@ if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestri
             else if (strlen(rcmd->valuestring))mqttClient.publish(addrstr, rcmd->valuestring, true);
         }
 }
+#endif //NOIP
   }
 } // emit
     if (item && item->type == aJson_String) {
@@ -996,6 +1046,22 @@ if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestri
             }
         }
     }
+
+    #ifdef CANDRV
+               
+            if (can)
+            {
+            if (newValue) {  //send set command
+                if (!scmd || scmd->type != aJson_String) LHCAN.sendCommand(can,itemCmd(ST_VOID,CMD_ON));
+                else if (strlen(scmd->valuestring))  LHCAN.sendCommand(can,itemCmd(scmd->valuestring));
+
+            } else {  //send reset command
+                if (!rcmd || rcmd->type != aJson_String) LHCAN.sendCommand(can,itemCmd(ST_VOID,CMD_OFF));
+                else if (strlen(rcmd->valuestring)) LHCAN.sendCommand(can,itemCmd(rcmd->valuestring));
+     
+            }
+            } 
+    #endif    
 }
 
 
@@ -1009,8 +1075,7 @@ void Input::onAnalogChanged(itemCmd newValue) {
     // Legacy
     aJsonObject *item = aJson.getObjectItem(inputObj, "item");
     aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
-
-
+#if not defined (NOIP)
     if (emit && emit->type == aJson_String) {
 
 //#ifdef WITH_DOMOTICZ
@@ -1028,11 +1093,18 @@ void Input::onAnalogChanged(itemCmd newValue) {
               if (mqttClient.connected() && !ethernetIdleCount)
                   mqttClient.publish(addrstr, strVal, true);
 }
-
+#endif //NOIP
     if (item && item->type == aJson_String) {
         Item it(item->valuestring);
         if (it.isValid())  it.Ctrl(newValue);
     }
+    
+    #ifdef CANDRV
+    aJsonObject *can  = aJson.getObjectItem(inputObj, "can");  
+    if (can) LHCAN.sendCommand(can, newValue); 
+    #endif
+
+       
 }
 
 
@@ -1072,10 +1144,21 @@ readCache::readCache()
 {
    addr=0;
    type=0;
+   cached_data = 0;
 }
 
-uint16_t readCache::analogReadCached (uint8_t _pin)
+uint16_t readCache::analogReadCached (uint8_t _pin, uint8_t trigPin, uint8_t _type )
 {
+#ifdef ULTRASONIC    
+if (_type == IN_ULTRASONIC)
+{
+ if ((_pin==addr) && (IN_ULTRASONIC == type)) return cached_data; 
+  type = IN_ULTRASONIC;
+  cached_data=ultrasonic.read();  
+  //debugSerial<<F("LEN: ")<<cached_data<<endl;
+  return cached_data;
+}
+#endif  
   if ((_pin==addr) && (IN_ANALOG==type)) return cached_data;
   addr = _pin;
   type = IN_ANALOG;

lighthub/inputs.h

@@ -33,6 +33,7 @@ e-mail    anklimov@gmail.com
 #define IN_DHT22         4
 #define IN_CCS811        5
 #define IN_HDC1080       6
+#define IN_ULTRASONIC    7
 
 #define IN_COUNTER       8
 #define IN_UPTIME       16
@@ -62,6 +63,7 @@ e-mail    anklimov@gmail.com
 #define CHECK_SENSOR 1
 #define CHECK_INPUT  2
 #define CHECK_INTERRUPT 3
+#define CHECK_ULTRASONIC 4
 
 
 #define T_LONG 1000
@@ -105,7 +107,7 @@ extern aJsonObject *inputs;
 
 
 typedef union {
-    long int aslong;
+    uint32_t aslong;
     uint32_t timestamp;
     // Analog input structure
     struct {
@@ -134,6 +136,7 @@ public:
     aJsonObject *inputObj;
     uint8_t inType;
     uint8_t pin;
+    uint8_t pin2;
     inStore *store;
 
     Input(aJsonObject *obj, aJsonObject * configObj = NULL);
@@ -188,11 +191,12 @@ protected:
 class readCache {
 public:
   readCache();
-  uint16_t analogReadCached (uint8_t pin);
+  uint16_t analogReadCached (uint8_t pin, uint8_t trigPin=0, uint8_t _type = IN_ANALOG);
   uint8_t  digitalReadCached(uint8_t pin);
   #ifdef MCP23017
   uint8_t  I2CReadBit(uint8_t type, uint8_t addr, uint8_t pin);
   #endif
+
   void invalidateInputCache();
 protected:
   uint8_t   addr;

lighthub/item.cpp

@@ -26,6 +26,7 @@ e-mail    anklimov@gmail.com
 #include "main.h"
 #include "bright.h"
 #include "itemCmd.h"
+#include "candriver.h"
 //#include "SHA256.h"
 
 #ifdef _dmxout
@@ -40,8 +41,9 @@ e-mail    anklimov@gmail.com
 #ifndef MODBUS_DISABLE
 #include <ModbusMaster.h>
 #endif
-
+#if not defined (NOIP)
 #include <PubSubClient.h>
+#endif
 #include "modules/out_spiled.h"
 #include "modules/out_ac.h"
 #include "modules/out_motor.h"
@@ -66,11 +68,18 @@ e-mail    anklimov@gmail.com
 #include "modules/out_humidifier.h"
 #endif
 
+#ifdef CANDRV
+#include <candriver.h>
+extern canDriver LHCAN;
+#endif
+
 short modbusBusy = 0;
 //bool isPendedModbusWrites = false;
 
 extern aJsonObject *pollingItem;
+#if not defined (NOIP)
 extern PubSubClient mqttClient;
+#endif
 extern int8_t ethernetIdleCount;
 extern int8_t configLocked;
 extern lan_status lanStatus;
@@ -133,8 +142,9 @@ int txt2subItem(char *payload) {
 
 //const short defval[4] = {0, 0, 0, 0}; //Type,Arg,Val,Cmd
 
-Item::Item(aJsonObject *obj)//Constructor
+Item::Item(aJsonObject *obj, aJsonObject *_items)//Constructor
 {
+    rootItems=_items;
     itemArr = obj;
     driver = NULL;
     *defaultSubItem = 0;
@@ -146,13 +156,23 @@ void Item::Parse() {
     if (isValid()) {
         // Todo - avoid static enlarge for every types
         for (int i = aJson.getArraySize(itemArr); i < 4; i++)
-            aJson.addItemToArray(itemArr, aJson.createNull());//( (long int) 0));
-                   // int(defval[i]) )); //Enlarge item to 4 elements. VAL=int if no other definition in conf
-        //itemType = aJson.getArrayItem(itemArr, I_TYPE)->valueint;
+            aJson.addItemToArray(itemArr, aJson.createNull());
+                
+     /*
         itemType = replaceTypeToInt (aJson.getArrayItem(itemArr, I_TYPE));
         itemArg = aJson.getArrayItem(itemArr, I_ARG);
         itemVal = aJson.getArrayItem(itemArr, I_VAL);
-        itemExt = aJson.getArrayItem(itemArr, I_EXT);
+        itemExt = aJson.getArrayItem(itemArr, I_EXT); */
+        
+        aJsonObject * cmdObj = NULL;
+        aJsonObject * itemTypeObj = itemArr->child;
+        if (itemTypeObj) itemArg = itemTypeObj->next;
+        if (itemArg) itemVal = itemArg->next;        
+        if (itemVal) cmdObj = itemVal->next;
+        if (cmdObj) itemExt = cmdObj->next;
+
+        itemType = replaceTypeToInt (itemTypeObj);
+
         switch (itemType)
         {
 #ifndef  PWM_DISABLE            
@@ -283,13 +303,14 @@ Item::~Item()
               }
 }
 
-Item::Item(char *name) //Constructor
+Item::Item(char *name, aJsonObject *_items) //Constructor
 {
     char * pDefaultSubItem = defaultSubItem;
+    rootItems=_items;
     driver = NULL;
     defaultSubItem[0] =0;
     defaultSuffixCode = 0;
-    if (name && items)
+    if (name && rootItems)
     {   char* sub;
         if (sub=strchr(name,'/'))
         {
@@ -298,7 +319,7 @@ Item::Item(char *name) //Constructor
         for(i=0;(name[i] && (name[i]!='/') && (i<MQTT_SUBJECT_LENGTH));i++)
             buf[i]=name[i];
         buf[i]=0;
-        itemArr = aJson.getObjectItem(items, buf);
+        itemArr = aJson.getObjectItem(rootItems, buf);
         sub++;
         strncpy(defaultSubItem,sub,sizeof(defaultSubItem)-1);
         defaultSuffixCode = retrieveCode (&pDefaultSubItem);
@@ -306,13 +327,107 @@ Item::Item(char *name) //Constructor
         //debugSerial<<F("defaultSubItem: ")<<defaultSubItem<<F(" defaultSuffixCode:")<<defaultSuffixCode<<endl;
         }
         else
-        itemArr = aJson.getObjectItem(items, name);
+        itemArr = aJson.getObjectItem(rootItems, name);
     }
     else itemArr = NULL;
     Parse();
 }
 
+uint16_t getCanNum(aJsonObject* verb)
+  {
+    if (!verb) return 0;
+   switch (verb->type)
+   {
+      case aJson_Array: 
+        {
+        aJsonObject *canNumObj=aJson.getArrayItem(verb,1);  
+        if (canNumObj && canNumObj->type == aJson_Int) return canNumObj->valueint;
+        return 0;   
+        }
+      case aJson_Object:  
+        {
+        aJsonObject *canNumObj=aJson.getObjectItem(verb, "can");  
+        if (canNumObj && canNumObj->type == aJson_Int) return canNumObj->valueint;
+        return 0;   
+        }    
+   }          
+   return 0; 
+  }
 
+char * Item::getSubItemStrById(uint8_t subItem)
+{
+if (subItem == NO_SUBITEM) return NULL;
+if (!itemArg) return NULL;
+aJsonObject * i = itemArg;
+if (i->type == aJson_Array) i=i->child;
+while (i)
+{
+    if (i->type == aJson_Object)
+       {
+        aJsonObject * s = aJson.getArrayItem(i,subItem);
+        if (s && (s->type == aJson_Object)) return s->name;
+        return NULL;
+       }
+    i=i->next;
+}
+return NULL;
+};
+
+ uint8_t Item::getSubitemId(char * subItem)
+{
+if (!subItem) return NO_SUBITEM;
+if (!itemArg) return NO_SUBITEM;
+
+aJsonObject * i = itemArg;
+if (i->type == aJson_Array) i=i->child;
+
+while (i)
+{
+    if (i->type == aJson_Object)
+       {
+          aJsonObject *c = i->child;
+          uint8_t index=0;
+          while (c)
+                        {
+                        if (!strcasecmp(c->name, subItem)) return index;   
+                        c = c->next; index++;
+                        }
+          return NO_SUBITEM;
+       }
+    i=i->next;   
+};
+return NO_SUBITEM;
+}
+
+ Item::Item(uint16_t num, uint8_t subItem, aJsonObject *_items)
+ {
+
+    itemArr = NULL;
+    itemArg = NULL;
+    itemVal = NULL;  
+    itemExt = NULL;
+    rootItems=_items;
+
+    driver = NULL;
+    defaultSubItem[0] =0;
+    defaultSuffixCode = 0;
+
+    if (!rootItems) return;
+    itemArr = rootItems->child;
+    if (!num) return;
+    while (itemArr)
+        {
+            if (getCanNum(itemArr->child) == num)
+                    {
+                        debugSerial<<"Find item: "<< itemArr->name << " addr:" << num << endl;
+                        Parse();
+                        char * subItemStr = getSubItemStrById(subItem);
+                        if (subItemStr) strncpy(defaultSubItem,subItemStr,sizeof(defaultSubItem)); 
+                        return;
+                    }
+            itemArr = itemArr->next;
+        }
+ }
 uint8_t Item::getCmd() {
     aJsonObject *t = aJson.getArrayItem(itemArr, I_CMD);
     if (t)
@@ -327,7 +442,7 @@ void Item::setCmd(uint8_t cmdValue) {
     {   
         itemCmd->type = aJson_Int;
         itemCmd->valueint = cmdValue & CMD_MASK | itemCmd->valueint & (FLAG_MASK);   // Preserve special bits
-        debugSerial<<F("SetCmd:")<<cmdValue<<endl;
+        //debugSerial<<F("SetCmd:")<<cmdValue<<endl;
       }
 }
 
@@ -544,7 +659,7 @@ if (suffix = strrchr(*psubItem, '/')) //Trying to retrieve right part
     *suffix= 0; //Truncate subItem string
     suffix++;
     suffixCode = txt2subItem(suffix);
-    debugSerial<<F("suffixCode:")<<suffixCode<<endl;
+  //  debugSerial<<F("suffixCode:")<<suffixCode<<endl;
     // myhome/dev/item/sub.....Item/suffix
     }
 else
@@ -579,13 +694,13 @@ long int Item::limitSetValue()
 
 
 // myhome/dev/item/subItem
-int Item::Ctrl(char * payload, char * subItem)
+int Item::Ctrl(char * payload, char * subItem, int remoteID)
 {
 if (!payload) return 0;
 int fr = freeRam();                           
 if (fr < minimalMemory) 
     {
-        errorSerial<<F("CTRL/txt: OutOfMemory: ")<<fr<<endl;
+        errorSerial<<F("MQTT: CTRL/txt: OutOfMemory: ")<<fr<<endl;
         return -1;
     }   
 
@@ -604,13 +719,16 @@ if (suffixCode == S_RAW)
 {   itemCmd ic;
     ic.Str(payload);
     ic.setSuffix(suffixCode);
+    if (remoteID) return   remoteCtrl(ic,remoteID,subItem);
     return   Ctrl(ic,subItem);
 }
 
 bool authorized = false;
-char * authPos = strchr(payload,'@');
+char * authToken = NULL;
+char * authPos = strchr(payload,'@'); //token@command
 if (authPos)
 {
+ authToken = payload;   
  *authPos=0;   
  authorized = checkToken(payload,authPos+1);
  payload=authPos+1;
@@ -647,7 +765,7 @@ st.setSuffix(suffixCode);
 
           int Par[3];        
           while (payload && k < 3)
-              Par[k++] = getInt((char **) &payload);
+              Par[k++] = getIntFromStr((char **) &payload);
           i=i+k; //i=total # of parameters
           switch(suffixCode)
               {case S_HUE:
@@ -677,7 +795,7 @@ st.setSuffix(suffixCode);
                       default: errorSerial<<F("Wrong paylad")<<endl;
                     }
               }
- 
+          if (remoteID) return   remoteCtrl(st,remoteID,subItem,authToken);
           return   Ctrl(st,subItem,true,authorized);
         } //Void command
           break;
@@ -692,7 +810,7 @@ st.setSuffix(suffixCode);
          short i = 0;
          int Par[4];
          while (payload && i < 4)
-             Par[i++] = getInt((char **) &payload);
+             Par[i++] = getIntFromStr((char **) &payload);
 
          switch (i) //Number of params
          {
@@ -701,7 +819,7 @@ st.setSuffix(suffixCode);
            case 4: st.RGBW(Par[0],Par[1],Par[2],Par[3]);
            default:;
          }
-         
+         if (remoteID) return   remoteCtrl(st,remoteID,subItem,authToken);
          return   Ctrl(st,subItem,true,authorized);
       }
       case CMD_UP:
@@ -710,37 +828,62 @@ st.setSuffix(suffixCode);
           itemCmd Par0 = getNumber((char **) &payload);
           Par0.Cmd(cmd);
           Par0.setSuffix(suffixCode);
+          if (remoteID) return   remoteCtrl(Par0,remoteID,subItem,authToken);
           return Ctrl(Par0, subItem,true,authorized);
           }
       default: //some known command
       {
-      int32_t intParam = getInt((char **) &payload);
+      int32_t intParam = getIntFromStr((char **) &payload);
       if (intParam) st.Int(intParam);
+      if (remoteID) return   remoteCtrl(st,remoteID,NULL,authToken);
       return Ctrl(st,NULL, true, authorized);
       }
   } //ctrl
 return 0;
 }
 
+int Item::remoteCtrl(itemCmd cmd, int remoteID, char* subItem, char * authToken)
+{
+  #ifdef CANDRV  
+  // Retrieve remote item id
+  if (!itemArr) return 0;
+  aJsonObject * itemHandler = itemArr->child;
+  if (!itemHandler || itemHandler->type!=aJson_Array) return 0;
+  aJsonObject *  itemIdObj=aJson.getArrayItem(itemHandler,1);
+  if (itemIdObj->type != aJson_Int) return 0;
+  
+  //Retrieve target controller ID
+  if (!remoteID) return 0;
+
+//TODO - translate subItem & auth token
+  short subitemNum = NO_SUBITEM;
+  return LHCAN.sendCommand(remoteID,itemIdObj->valueint,cmd,false,subitemNum);
+  #endif
+  return 0;
+}
+
 // Recursive function with small stack consumption
 // if cmd defined - execute Ctrl for any group members recursively
 // else performs Activity check for group members and return true if any member is active 
-bool digGroup (aJsonObject *itemArr, itemCmd *cmd, char* subItem, bool authorized)
+bool Item::digGroup (aJsonObject *itemArr, itemCmd *cmd, char* subItem, bool authorized)
 {    if (!itemArr || itemArr->type!=aJson_Array) return false; 
      // Iterate across array of names
       aJsonObject *i = itemArr->child;                                        
                 configLocked++;
                 while (i) {
-                    if (i->type == aJson_String)
+                    switch  (i->type)
+                    {
+                    case aJson_String:
                     {   //debugSerial<< i->valuestring<<endl;
-                        aJsonObject *nextItem = aJson.getObjectItem(items, i->valuestring);
+                        aJsonObject *nextItem = aJson.getObjectItem(rootItems, i->valuestring);
                         if (nextItem && nextItem->type == aJson_Array) //nextItem is correct item
                                {    
                                 Item it(nextItem);  
                                 if (cmd && it.isValid()) it.Ctrl(*cmd,subItem,false,authorized); //Execute (non recursive)
                                 //Retrieve itemType    
-                                aJsonObject * itemtype = aJson.getArrayItem(nextItem,0);
-                                if (itemtype && itemtype->type == aJson_Int  && itemtype->valueint == CH_GROUP) 
+                                //aJsonObject * itemtype = aJson.getArrayItem(nextItem,0);
+                                //if (itemtype && itemtype->type == aJson_Int  && itemtype->valueint == CH_GROUP) 
+                                if (it.itemType == CH_GROUP) 
                                     { //is Group
                                     aJsonObject * itemSubArray = aJson.getArrayItem(nextItem,1);
                                     short res = digGroup(itemSubArray,cmd,subItem,authorized);
@@ -758,6 +901,11 @@ bool digGroup (aJsonObject *itemArr, itemCmd *cmd, char* subItem, bool authorize
                                                     }
                                } 
                     }    
+                    break;
+                    case aJson_Object:
+                    case aJson_Array:
+                    executeCommand(i,-1,*cmd);
+                    }//switch
                     i = i->next;
                 } //while
                 configLocked--;
@@ -1470,10 +1618,16 @@ if ((!driver || driver->isAllowed(cmd)) && (!getFlag(FLAG_FREEZED)))
                         {
                         thermostatStore tStore;
                         tStore.asint=getExt();
-                        if (!tStore.timestamp16) mqttClient.publish("/alarmoff/snsr", itemArr->name);
+                        if (!tStore.timestamp16) 
+                                    {
+                                    infoSerial<<F("Cleaning alarm ")<<itemArr->name<<endl;    
+                                    #if not defined (NOIP)
+                                    mqttClient.publish("/alarmoff/snsr", itemArr->name);
+                                    #endif
+                                    }
                         tStore.tempX100=cmd.getFloat()*100.;         //Save measurement
                         tStore.timestamp16=millisNZ(8) & 0xFFFF;    //And timestamp
-                        //debugSerial<<F(" T:")<<tStore.tempX100<<F(" TS:")<<tStore.timestamp16<<endl;
+                        debugSerial<<F("THERM:")<<itemArr->name<<F(" T:")<<tStore.tempX100<<F(" TS:")<<tStore.timestamp16<<endl;
                         setExt(tStore.asint);
                         res=1;
                         }
@@ -1552,7 +1706,7 @@ int Item::isActive() {
     itemCmd st;
     int val = 0;
 
-    debugSerial<<itemArr->name<<F(" ");
+    debugSerial<<F("ACTIVE:")<<itemArr->name<<F(" ");
     if (!isValid())
                       {
                       debugSerial<<F(" invalid")<<endl;
@@ -1716,7 +1870,6 @@ int Item::SendStatus(int sendFlags) {
         itemCmd st(ST_VOID,CMD_VOID);  
         st.loadItem(this, FLAG_COMMAND | FLAG_PARAMETERS);
         sendFlags |= getFlag(FLAG_COMMAND | FLAG_PARAMETERS | FLAG_FLAGS); //if some delayed status is pending
-        //debugSerial<<F("ssi:")<<sendFlags<<endl;
         return SendStatusImmediate(st,sendFlags);
     }
   }
@@ -1726,8 +1879,15 @@ int Item::SendStatus(int sendFlags) {
       char addrstr[64];
       char valstr[20] = "";
       char cmdstr[9] = "";
-    //debugSerial<<"SSI "<<subItem<<endl;  
+
+    debugSerial<<"SENDSTATUS: "<<subItem;  
     st.debugOut();
+
+    #ifdef CANDRV
+    if (!(sendFlags & FLAG_NOT_SEND_CAN)) 
+            LHCAN.sendStatus(getCanNum(itemArr->child),(sendFlags & FLAG_SEND_DELAYED)?st.setSuffix(S_DELAYED):st, getSubitemId(subItem));
+    #endif
+
     if (sendFlags & FLAG_COMMAND)
     {
     // Preparing legacy Command payload  //////////////
@@ -1754,7 +1914,7 @@ int Item::SendStatus(int sendFlags) {
             break;
 
         default:
-            debugSerial<<F("Unknown cmd \n");
+            debugSerial<<F("SENDSTATUS: Unknown cmd \n");
             sendFlags &= ~FLAG_COMMAND;
     }
    }
@@ -1762,7 +1922,7 @@ int Item::SendStatus(int sendFlags) {
       // publish to MQTT - OpenHab Legacy style to 
       // myhome/s_out/item - mix: value and command
     
-
+                      #if not defined (NOIP)
                       if (mqttClient.connected()  && !ethernetIdleCount)
                       {
                         if (!subItem )
@@ -1787,6 +1947,7 @@ int Item::SendStatus(int sendFlags) {
                         }
                         } //!subItem
                       }
+                     #endif //NOIP 
               else
                       {
                       setFlag(sendFlags);
@@ -1835,16 +1996,18 @@ int Item::SendStatus(int sendFlags) {
               
 
               debugSerial<<F("Pub: ")<<addrstr<<F("->")<<valstr<<endl;
+              #if not defined (NOIP)
               if (mqttClient.connected()  && !ethernetIdleCount)
                  {
                   mqttClient.publish(addrstr, valstr,true);
                   clearFlag(FLAG_PARAMETERS);
-                 }
+                 }    
               else
                {
                setFlag(sendFlags);
                return 0;
                }
+              #endif   
               }
 
 
@@ -1890,6 +2053,7 @@ int Item::SendStatus(int sendFlags) {
               strncat_P(addrstr, suffix_P[S_CMD], sizeof(addrstr)-1);              
 
               debugSerial<<F("Pub: ")<<addrstr<<F("->")<<cmdstr<<endl;
+              #if not defined (NOIP)
               if (mqttClient.connected()  && !ethernetIdleCount)
                  {
                   mqttClient.publish(addrstr, cmdstr,true);
@@ -1900,6 +2064,7 @@ int Item::SendStatus(int sendFlags) {
                 setFlag(sendFlags);
                 return 0;
                }
+              #endif   
               }
 // Send ctrl
               if (sendFlags & FLAG_FLAGS)
@@ -1928,6 +2093,7 @@ int Item::SendStatus(int sendFlags) {
               strncat_P(addrstr, suffix_P[S_CTRL], sizeof(addrstr)-1);        
 
               debugSerial<<F("Pub: ")<<addrstr<<F("->")<<cmdstr<<endl;
+              #if not defined (NOIP)
               if (mqttClient.connected()  && !ethernetIdleCount)
                  {
                   mqttClient.publish(addrstr, cmdstr,true);
@@ -1938,6 +2104,7 @@ int Item::SendStatus(int sendFlags) {
                 setFlag(sendFlags);
                 return 0;
                }
+              #endif //NOIP
               }
         return 1;
     }
@@ -2430,7 +2597,7 @@ int Item::checkModbusDimmer() {
                 nextItem.checkModbusDimmer(data);
                 pollingItem = pollingItem->next;
                 if (!pollingItem)
-                    pollingItem = items->child;
+                    pollingItem = rootItems->child;
             }
     } else
         debugSerial << F("MB: polling ") << itemArr->name<< F(" error=") << _HEX(result) << endl;

lighthub/item.h

@@ -98,16 +98,18 @@ extern aJsonObject *items;
 extern short thermoSetCurTemp(char *name, float t);
 
 int txt2cmd (char * payload);
-bool digGroup (aJsonObject *itemArr, itemCmd *cmd = NULL, char* subItem = NULL, bool authorized = false);
+int txt2subItem(char *payload);
+
 class Item
 {
   public:
-  aJsonObject *itemArr, *itemArg,*itemVal,*itemExt;
+  aJsonObject *rootItems, *itemArr, *itemArg,*itemVal,*itemExt;
   uint8_t itemType;
   abstractOut * driver;
 
-  Item(char * name);
-  Item(aJsonObject * obj);
+  Item(char * name, aJsonObject *_items = items);
+  Item(aJsonObject * obj, aJsonObject *_items = items);
+  Item(uint16_t num, uint8_t subItem, aJsonObject *_items = items);
   ~Item();
 
   boolean isValid ();
@@ -115,8 +117,8 @@ class Item
   void Stop();
   //int Ctrl(short cmd, short n=0, int * Parameters=NULL, int suffixCode=0, char* subItem=NULL);
   int Ctrl(itemCmd cmd, char* subItem=NULL, bool allowRecursion = true, bool authorized=false);
-  int Ctrl(char * payload,  char * subItem=NULL);
-
+  int Ctrl(char * payload,  char * subItem=NULL, int remoteID = 0);
+  int remoteCtrl(itemCmd cmd, int remoteID, char* subItem=NULL, char * authToken=NULL);
   int getArg(short n=0);
   float getFloatArg(short n=0);
   short getArgCount();
@@ -146,8 +148,11 @@ class Item
   int scheduleCommand(itemCmd cmd, bool authorized);
   int scheduleOppositeCommand(itemCmd cmd,bool isActiveNow,bool authorized);
   int isScheduled();
+  char * getSubItemStrById(uint8_t subItem);
+  uint8_t getSubitemId(char * subItem);
 
   protected:
+  bool digGroup (aJsonObject *itemArr, itemCmd *cmd = NULL, char* subItem = NULL, bool authorized = false);
   long int limitSetValue();
   int VacomSetFan (itemCmd st);
   int VacomSetHeat(itemCmd st);

lighthub/itemCmd.cpp

@@ -94,6 +94,86 @@ itemCmd::itemCmd(Item *item)
   loadItem(item);
 }
 
+/*!
+     \brief Constructor with textual definition of command
+     \param cmd - name of cmd 
+todo - extend to values
+*/
+itemCmd::itemCmd(char * _cmd)
+{
+  //debugSerial<<"ITEMCMD:" <<_cmd<<endl;
+  cmd.aslong=0;
+  param.aslong=0;
+
+  short i=0;
+  int Par[4];
+
+  while (_cmd[i]) {_cmd[i]=toupper(_cmd[i]);i++;};
+
+  int cmdN = txt2cmd(_cmd);
+  if (cmdN>=0) cmd.cmdCode = cmdN;
+
+  bool hsvflag=false;
+
+  switch (cmd.cmdCode) {
+      case CMD_HSV: 
+        hsvflag=true;
+      case CMD_RGB:
+
+        cmd.cmdCode=CMD_VOID;
+        //Parsing integers from payload
+        i = 0;
+
+         while (_cmd && i < 4)
+                Par[i++] = getIntFromStr((char **) &_cmd);
+
+         if (hsvflag)
+         {
+         setSuffix(S_HSV); 
+         cmd.itemArgType=ST_HSV255;
+         switch (i) //Number of params
+                {
+                  case 4:
+                      setColorTemp(Par[3]);
+                  case 3:
+                      param.v=Par[2]; 
+                  case 2:
+                      setH(Par[0]);
+                      setS(Par[1]);
+                } 
+         }
+         else 
+         { 
+         setSuffix(S_RGB); 
+         switch (i) //Number of params
+                  {
+                    case 3: RGB(Par[0],Par[1],Par[2]);
+                    break;
+                    case 4: RGBW(Par[0],Par[1],Par[2],Par[3]);
+                    default:;
+                  }
+         }
+
+      break;
+
+  //    case CMD_UNKNOWN: //Not known command
+  //    case CMD_JSON: //JSON input (not implemented yet
+  //    cmd.cmdCode=CMD_VOID;
+  //    break;
+
+      default: //some known command
+      //case CMD_VOID:
+      //case CMD_UP:
+      //case CMD_DN:    
+     {    
+     itemCmd num =getNumber((char **) &_cmd);  
+     cmd.itemArgType=num.getArgType();
+     param.aslong=num.param.aslong;
+     if (cmd.cmdCode) setSuffix(S_CMD);
+     }
+  } //switch
+  //debugOut();
+}
 
 itemCmd itemCmd::setChanType(short chanType)
 {
@@ -596,7 +676,7 @@ itemCmd itemCmd::assignFrom(itemCmd from, short chanType)
                               {
                                 long coldPercent = map (colorT,0,100,100,30); 
                                 long hotPercent  = map (colorT,0,100,30,100);
-                                int rgbvLevel;
+                                int rgbvLevel = 0;
 
                                 if (rgbSaturation < 128) { // Using white
                                                 param.w=map((127 - rgbSaturation) * rgbValue *hotPercent, 0, 127*255*100, 0, 255);
@@ -1151,6 +1231,7 @@ bool itemCmd::saveItem(Item * item, uint16_t optionsFlag)
                                   break;
                                   default:  
                                   item->setCmd(cmd.cmdCode);
+                                  
                                   }
   if (optionsFlag & FLAG_PARAMETERS) 
                                     switch (cmd.itemArgType)
@@ -1171,8 +1252,8 @@ bool itemCmd::saveItem(Item * item, uint16_t optionsFlag)
                                      item->setVal(param.asInt32);
                                      item->setSubtype(cmd.itemArgType); 
                                     }
-  debugSerial<<F("Saved:");
-  debugOut();
+  //debugSerial<<F("Saved:");
+  //debugOut();
   return true;
   }
 return false;
@@ -1196,8 +1277,14 @@ return false;
 
   int replaceTypeToInt(aJsonObject* verb)
   {
-   if (verb && verb->type == aJson_String) 
-    {
+    if (!verb) return -1;
+   switch (verb->type)
+   {
+      case aJson_Int: return verb->valueint;    
+      case aJson_Array: return replaceTypeToInt(verb->child);     
+      case aJson_Object:  return replaceTypeToInt(aJson.getObjectItem(verb, "type"));
+      case  aJson_String: 
+      {
       int type = type2num(verb->valuestring);
       if (type>=0)
           {
@@ -1206,7 +1293,9 @@ return false;
             verb->type=aJson_Int;
             return verb->valueint;
           }   
-    } else if (verb && verb->type == aJson_Int) return verb->valueint;
+      } 
+      break;
+   }          
    return -1; 
   }
 
@@ -1222,7 +1311,7 @@ return false;
    {
     case aJson_Array:
     {
-      debugSerial<<"Array mapping"<<endl; 
+      traceSerial<<"Array mapping"<<endl; 
       aJsonObject *i = cmdMapping->child;
       //if first array element is not array - this is default mapping value
       if (i && i->type==aJson_Int) 
@@ -1365,7 +1454,9 @@ if (valMapping && valMapping->type == aJson_Array && aJson.getArraySize(valMappi
 
     if (getInt()<aJson.getArrayItem(valMapping,2)->valueint) return itemCmd().Int((uint32_t) 0);  
      int diff = ((b-a)/(d-c))/2;
-     return itemCmd().Int((uint32_t) constrain(map(getInt(),c,d,a,b)+diff,0,255));  
+     //return itemCmd().Int((uint32_t) constrain(map(getInt(),c,d,a,b)+diff,0,255));  
+     return itemCmd().Int((uint32_t) constrain(map(getInt(),c,d,a,b)+diff,0,b));  
+     //return itemCmd().Int((uint32_t) map(getInt(),c,d,a,b)+diff);  
     }
   if (valMapping && valMapping->type == aJson_NULL) return itemCmd();  
   return *this;

lighthub/itemCmd.h

@@ -119,7 +119,7 @@ const ch_type ch_type_P[] PROGMEM =
 #define FLAG_HALTED 0x40000UL
 #define FLAG_XON 0x80000UL
 
-
+#define FLAG_NOT_SEND_CAN 0x2UL
 
 int txt2cmd (char * payload);
 
@@ -157,10 +157,9 @@ typedef union
   struct
       {
         uint8_t cmdCode;
-        uint8_t  suffixCode:4;
         uint8_t  itemArgType:4;
-        
-        uint8_t cmdEffect; //Reserve
+        uint8_t  cmdEffect:4; //Reserve    
+        uint8_t suffixCode; 
         uint8_t cmdParam;  //Reserve
       };
 } itemCmdStore;
@@ -204,6 +203,7 @@ public:
   itemCmd(uint8_t _type=ST_VOID, uint8_t _code=CMD_VOID);
   itemCmd(float val);
   itemCmd(Item *item);
+  itemCmd(char *cmd);
 
   itemCmd assignFrom(itemCmd from, short chanType=-1);
 

lighthub/main.h

@@ -8,13 +8,17 @@
 
 #if defined(__SAM3X8E__)
 #include <watchdog.h>
-#include <ArduinoHttpClient.h>
+    #if not defined (NOIP)
+    #include <ArduinoHttpClient.h>
+    #endif
 //#include "TimerInterrupt_Generic.h"
 #endif
 
 #if defined(ARDUINO_ARCH_AVR)
-#include "HTTPClient.h"
-//#include <ArduinoHttpClient.h>
+    #if not defined (NOIP)
+    #include "HTTPClient.h"
+    #endif
+
 #include <avr/pgmspace.h>
 #include <avr/wdt.h>
 #endif
@@ -35,7 +39,7 @@
 //#define Ethernet WiFi
 #endif
 
-#if defined ARDUINO_ARCH_ESP32
+#if defined (ARDUINO_ARCH_ESP32)
 #include <FS.h>                   //this needs to be first, or it all crashes and burns...
 //#include "SPIFFS.h"
 //#include <EEPROM.h>
@@ -58,7 +62,7 @@
 #include <ArduinoHttpClient.h>
 #endif
 
-#ifdef ARDUINO_ARCH_STM32
+#if defined (ARDUINO_ARCH_STM32) and not defined (NOIP)
 #include "HttpClient.h"
 //#include "UIPEthernet.h"
 //#include <NRFFlashStorage.h>
@@ -156,7 +160,8 @@ extern Streamlog  errorSerial;
         #include <ESP8266mDNS.h>
   #endif
 #define Ethernet WiFi
-#else  //Wired connection
+#else
+#if  not defined (NOIP)  //Wired connection
         #ifdef Wiz5500
         #include <Ethernet2.h>
         #else
@@ -166,6 +171,7 @@ extern Streamlog  errorSerial;
             #include <Ethernet.h>
             #endif
         #endif
+#endif        
 #endif
 
 
@@ -190,7 +196,9 @@ extern Streamlog  errorSerial;
 #include "Arduino.h"
 #include "utils.h"
 #include "textconst.h"
-#include <PubSubClient.h>
+    #if not defined (NOIP)
+    #include <PubSubClient.h>
+    #endif
 #include <SPI.h>
 #include <string.h>
 #include "aJSON.h"
@@ -198,6 +206,9 @@ extern Streamlog  errorSerial;
 #include "stdarg.h"
 #include "item.h"
 #include "inputs.h"
+#ifdef CANDRV
+#include <candriver.h>
+#endif
 
 #ifdef _artnet
 extern Artnet *artnet;
@@ -218,7 +229,11 @@ enum lan_status {
     RECONNECT = 13,
     READ_RE_CONFIG = 14,
     DO_READ_RE_CONFIG = 15,
-    DO_NOTHING = -15
+    DO_NOTHING = -15,
+    DO_GET = -16,
+    GET = -17,
+    GET_IN_PROGRESS = 18,
+    AWAITING_CONFIG = 19
 };
 
 extern lan_status lanStatus;
@@ -230,11 +245,18 @@ typedef union {
 
 bool isNotRetainingStatus();
 
+#if not defined (NOIP)
 void mqttCallback(char *topic, byte *payload, unsigned int length);
-
-void printMACAddress();
-
 lan_status lanLoop();
+int loadConfigFromHttp();
+void onInitialStateInitLAN();
+void onMQTTConnect();
+void ip_ready_config_loaded_connecting_to_broker();
+
+#endif
+
+void setupMacAddress();
+void printMACAddress();
 
 #ifndef OWIRE_DISABLE
 void Changed(int i, DeviceAddress addr, float currentTemp);
@@ -246,7 +268,7 @@ int cmdFunctionHelp(int arg_cnt, char **args);
 
 int cmdFunctionKill(int arg_cnt, char **args);
 
-void applyConfig();
+bool  applyConfig();
 
 int cmdFunctionLoad(int arg_cnt, char **args);
 
@@ -261,6 +283,8 @@ int cmdFunctionGet(int arg_cnt, char **args);
 int cmdFunctionLoglevel(int arg_cnt, char **args);
 
 void printBool(bool arg);
+
+int cmdFunctionSave(int arg_cnt, char **args);
 /*
 void saveFlash(short n, char *str);
 
@@ -271,7 +295,7 @@ void saveFlash(short n, IPAddress& ip);
 int ipLoadFromFlash(short n, IPAddress &ip);
 */
 
-int loadConfigFromHttp();
+
 
 void preTransmission();
 
@@ -303,8 +327,6 @@ void printConfigSummary();
 
 void setupCmdArduino();
 
-void setupMacAddress();
-
 void printFirmwareVersionAndBuildOptions();
 
 bool IsThermostat(const aJsonObject *item);
@@ -313,14 +335,13 @@ bool disabledDisconnected(const aJsonObject *thermoExtensionArray, int thermoLat
 
 void resetHard();
 
-void onInitialStateInitLAN();
-
-void ip_ready_config_loaded_connecting_to_broker();
+bool cleanConf(short locksAlowed=0);
 
 void printCurentLanConfig();
 
-void onMQTTConnect();
-
 int16_t attachMaturaTimer();
 
+void setFirstBroker();
+void setNextBroker();
+
 //void printFreeRam();

lighthub/modules/in_ccs811_hdc1080.cpp

@@ -22,14 +22,14 @@ static bool CCS811ready = false;
 
 int  in_ccs811::Setup()
 {
-  if (CCS811ready) {errorSerial<<F("ccs811 is already initialized")<<endl; return 0;}
+  if (CCS811ready) {errorSerial<<F("CCS811: Already initialized")<<endl; return 0;}
 
 #ifdef WAK_PIN
   pinMode(WAK_PIN,OUTPUT);
   digitalWrite(WAK_PIN,LOW);
 #endif
 
-infoSerial.println("CCS811 Init");
+infoSerial.println(F("CCS811: Init"));
 
 #if defined (TWI_SCL) && defined (TWI_SDA)
 Wire.begin(TWI_SDA,TWI_SCL); //Inialize I2C Harware
@@ -37,7 +37,9 @@ Wire.begin(TWI_SDA,TWI_SCL); //Inialize I2C Harware
 Wire.begin(); //Inialize I2C Harware
 #endif
 
-Wire.setClock(4000);
+#ifdef I2C_CLOCK
+Wire.setClock(I2C_CLOCK);
+#endif
 
   //It is recommended to check return status on .begin(), but it is not
   //required.
@@ -46,8 +48,7 @@ Wire.setClock(4000);
   if (returnCode != CCS811Core::SENSOR_SUCCESS)
   //if (returnCode != CCS811Core::CCS811_Stat_SUCCESS)
   {
-    errorSerial.print("CCS811 Init error ");
-    //debugSerial.println(ccs811.statusString(returnCode));
+    errorSerial.print(F("CCS811: Init error "));
     printDriverError(returnCode);
     return 0;
   }
@@ -68,16 +69,16 @@ return 1;
 int in_hdc1080::Setup()
 {
 //i2cReset();  
-if (HDC1080ready)  {debugSerial<<F("hdc1080 is already initialized")<<endl; return 0;}
-debugSerial.println("HDC1080 Init ");
+if (HDC1080ready)  {debugSerial<<F("HDC1080: Already initialized")<<endl; return 0;}
+debugSerial.print(F("HDC1080: Init. "));
 Wire.begin(); //Inialize I2C Harware
 // Default settings:
 // - Heater off
 // - 14 bit Temperature and Humidity Measurement Resolutions
 hdc1080.begin(0x40);
-debugSerial.print("Manufacturer ID=0x");
-debugSerial.println(hdc1080.readManufacturerId(), HEX); // 0x5449 ID of Texas Instruments
-debugSerial.print("Device ID=0x");
+debugSerial.print(F("Manufacturer ID=0x"));
+debugSerial.print(hdc1080.readManufacturerId(), HEX); // 0x5449 ID of Texas Instruments
+debugSerial.print(F(" Device ID=0x"));
 debugSerial.println(hdc1080.readDeviceId(), HEX); // 0x1050 ID of the device
 printSerialNumber();
 HDC1080ready = true;
@@ -91,14 +92,14 @@ int in_hdc1080::Poll(short cause)
   float h,t;
   int reg;
 if (cause!=POLLING_SLOW) return 0;
-if (!HDC1080ready) {debugSerial<<F("HDC1080 not initialized")<<endl; return 0;}
-debugSerial.print("HDC Status=");
-debugSerial.println(reg=hdc1080.readRegister().rawData,HEX);
+if (!HDC1080ready) {errorSerial<<F("HDC1080: Not initialized")<<endl; return 0;}
+debugSerial.print(F("HDC1080: Status="));
+debugSerial.print(reg=hdc1080.readRegister().rawData,HEX);
 if (reg!=0xff)
 {
   debugSerial.print(" T=");
   debugSerial.print(t=hdc1080.readTemperature());
-  debugSerial.print("C, RH=");
+  debugSerial.print(F("C, RH="));
   debugSerial.print(h=hdc1080.readHumidity());
   debugSerial.println("%");
 
@@ -126,6 +127,7 @@ if (reg!=0xff)
 }
 else //ESP I2C glitch
   {
+    debugSerial.println();
     i2cReset();
   }
 return INTERVAL_SLOW_POLLING;
@@ -147,14 +149,14 @@ int in_ccs811::Poll(short cause)
     CCS811Core::status returnCode = ccs811.readAlgorithmResults();
     printDriverError(returnCode);
     float co2,tvoc;
-    debugSerial.print(" CO2[");
+    debugSerial.print(F(" CO2["));
     //Returns calculated CO2 reading
     debugSerial.print(co2 = ccs811.getCO2());
-    debugSerial.print("] tVOC[");
+    debugSerial.print(F("] tVOC["));
     //Returns calculated TVOC reading
 
     debugSerial.print(tvoc = ccs811.getTVOC());
-    debugSerial.print("] baseline[");
+    debugSerial.print(F("] baseline["));
     debugSerial.print(ccs811Baseline = ccs811.getBaseline());
 
     #ifdef M5STACK
@@ -192,11 +194,11 @@ int in_ccs811::Poll(short cause)
 }
 
 void in_hdc1080::printSerialNumber() {
-debugSerial.print("Device Serial Number=");
+infoSerial.print(F("Device Serial Number="));
 HDC1080_SerialNumber sernum = hdc1080.readSerialNumber();
 char format[16];
 sprintf(format, "%02X-%04X-%04X", sernum.serialFirst, sernum.serialMid, sernum.serialLast);
-debugSerial.println(format);
+infoSerial.println(format);
 }
 
 //printDriverError decodes the CCS811Core::status type and prints the
@@ -206,25 +208,26 @@ debugSerial.println(format);
 //to this function to see what the output was.
 void in_ccs811::printDriverError( CCS811Core::status errorCode )
 {
+  debugSerial.print(F("CCS811: "));
   switch ( errorCode )
   {
     case CCS811Core::SENSOR_SUCCESS:
-      debugSerial.print("SUCCESS");
+      debugSerial.print(F("SUCCESS"));
       break;
     case CCS811Core::SENSOR_ID_ERROR:
-      debugSerial.print("ID_ERROR");
+      debugSerial.print(F("ID_ERROR"));
       break;
     case CCS811Core::SENSOR_I2C_ERROR:
-      debugSerial.print("I2C_ERROR");
+      debugSerial.print(F("I2C_ERROR"));
       break;
     case CCS811Core::SENSOR_INTERNAL_ERROR:
-      debugSerial.print("INTERNAL_ERROR");
+      debugSerial.print(F("INTERNAL_ERROR"));
       break;
     case CCS811Core::SENSOR_GENERIC_ERROR:
-      debugSerial.print("GENERIC_ERROR");
+      debugSerial.print(F("GENERIC_ERROR"));
       break;
     default:
-      debugSerial.print("Unspecified error.");
+      debugSerial.print(F("Unspecified error."));
   }
 }
 
@@ -236,18 +239,18 @@ void in_ccs811::printSensorError()
 
   if ( error == 0xFF ) //comm error
   {
-    debugSerial.println("Failed to get ERROR_ID register.");
+    errorSerial.println(F("CCS811: Failed to get ERROR_ID register."));
   }
   else
   {
-    //debugSerial.print("");
-    if (error & 1 << 5) debugSerial.print("Error: HeaterSupply");
-    if (error & 1 << 4) debugSerial.print("Error: HeaterFault");
-    if (error & 1 << 3) debugSerial.print("Error: MaxResistance");
-    if (error & 1 << 2) debugSerial.print("Error: MeasModeInvalid");
-    if (error & 1 << 1) debugSerial.print("Error: ReadRegInvalid");
-    if (error & 1 << 0) debugSerial.print("Error: MsgInvalid");
-    debugSerial.println();
+    if (error) errorSerial.print(F("CCS811: Error "));
+    if (error & 1 << 5) errorSerial.print(F("HeaterSupply"));
+    if (error & 1 << 4) errorSerial.print(F("HeaterFault"));
+    if (error & 1 << 3) errorSerial.print(F("MaxResistance"));
+    if (error & 1 << 2) errorSerial.print(F("MeasModeInvalid"));
+    if (error & 1 << 1) errorSerial.print(F("ReadRegInvalid"));
+    if (error & 1 << 0) errorSerial.print(F("MsgInvalid"));
+    if (error) errorSerial.println();
   }
 }
 #endif

lighthub/modules/in_ccs811_hdc1080.h

@@ -7,18 +7,22 @@
 #include "ClosedCube_HDC1080.h"
 #include "SparkFunCCS811.h" //Click here to get the library: http://librarymanager/All#SparkFun_CCS811
 
+//#ifndef I2C_CLOCK
+//#define I2C_CLOCK 4000
+//#endif
+
 //#define CCS811_ADDR 0x5B //Default I2C Address
 #define CCS811_ADDR 0x5A //Alternate I2C Address
 
 #if defined (ARDUINO_ARCH_ESP8266) 
 
-    #if not defined (TWI_SCL) && defined (D1)
-    #define TWI_SCL D1
-    #endif
+ //   #if not defined (TWI_SCL) && defined (D1)
+ //   #define TWI_SCL D1
+ //   #endif
 
-    #if not defined (WAK_PIN) && defined (D3)
-    #define WAK_PIN D3
-    #endif
+  //  #if not defined (WAK_PIN) && defined (D3)
+  //  #define WAK_PIN D3
+  //  #endif
 
     #if defined (TWI_SCL)
     #define SCL_LOW()   (GPES = (1 << TWI_SCL))
@@ -28,16 +32,10 @@
 
 #endif
 
-/*
-#if defined (__SAM3X8E__)
-#define SCL_LOW()   digitalWrite(21,LOW)
-#define SCL_HIGH()  digitalWrite(21,HIGH)
-#define SCL_RESET
-#endif
-*/
+
 
 #if defined (ARDUINO_ARCH_ESP32)
-#undef WAK_PIN
+//#undef WAK_PIN
 #undef SCL_RESET
 //#ifndef WAK_PIN
 //#define WAK_PIN 17
@@ -45,9 +43,9 @@
 #endif
 
 #if defined(ARDUINO_ARCH_AVR)
-#ifndef WAK_PIN
-#define WAK_PIN 3  // for LightHub UEXT SCS Pin
-#endif
+//#ifndef WAK_PIN
+//#define WAK_PIN 3  // for LightHub UEXT SCS Pin
+//#endif
 #endif
 
 

lighthub/modules/out_mercury.cpp

@@ -97,6 +97,7 @@ debugSerial.println("Mercury: De-Init");
 disconnectMercury();
 delete store;
 item->setPersistent(NULL);
+setStatus(CST_UNKNOWN);
 store = NULL;
 return 1;
 }

lighthub/modules/out_mercury.h

@@ -20,16 +20,16 @@ public:
 #define MB_SEND_ERROR 4
 #define MB_SEND_ATTEMPTS 3
 
-#define M_CONNECTING  10
-#define M_CONNECTED 11 
-#define M_POLLING1 12
-#define M_POLLING2 13
-#define M_POLLING3 14
-#define M_POLLING4 15
-#define M_POLLING5 16
-#define M_POLLING6 17
-#define M_POLLING7 18
-#define M_POLLING8 19
+#define M_CONNECTING  CST_USER+0 
+#define M_CONNECTED CST_USER+1 
+#define M_POLLING1 CST_USER+2
+#define M_POLLING2 CST_USER+3
+#define M_POLLING3 CST_USER+4
+#define M_POLLING4 CST_USER+5
+#define M_POLLING5 CST_USER+6
+#define M_POLLING6 CST_USER+7
+#define M_POLLING7 CST_USER+8
+#define M_POLLING8 CST_USER+9
 
 #define RET_SUCCESS 0
 #define RET_INVALID_PARAM 1

lighthub/modules/out_modbus.cpp

@@ -60,45 +60,6 @@ const reg_t regSize_P[] PROGMEM =
 } ;
 #define regSizeNum sizeof(regSize_P)/sizeof(reg_t)
 
-/*
-const serial_t serialModes_P[] PROGMEM =
-{
-  { "8E1", (serialParamType) SERIAL_8E1},//(uint16_t) US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_EVEN },
-  { "8N1", (serialParamType) SERIAL_8N1},
-  { "8E2", (serialParamType) SERIAL_8E2},
-  { "8N2", (serialParamType) SERIAL_8N2},
-  { "8O1", (serialParamType) SERIAL_8O1},
-  { "8O2", (serialParamType) SERIAL_8O2},
-//  { "8M1", SERIAL_8M1},
-//  { "8S1", SERIAL_8S1},
-  { "7E1", (serialParamType) SERIAL_7E1},//(uint16_t) US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_EVEN },
-  { "7N1", (serialParamType) SERIAL_7N1},
-  { "7E2", (serialParamType) SERIAL_7E2},
-  { "7N2", (serialParamType) SERIAL_7N2},
-  { "7O1", (serialParamType) SERIAL_7O1},
-  { "7O2", (serialParamType) SERIAL_7O2}
-//  { "7M1", SERIAL_7M1},
-//  { "7S1", SERIAL_7S1}
-} ;
-
-#define serialModesNum sizeof(serialModes_P)/sizeof(serial_t)
-
-serialParamType  str2SerialParam(char * str)
-{ debugSerial<<str<<F(" =>");
-  for(uint8_t i=0; i<serialModesNum && str;i++)
-      if (strcmp_P(str, serialModes_P[i].verb) == 0)
-           {
-
-           //debugSerial<< i << F(" ") << pgm_read_word_near(&serialModes_P[i].mode)<< endl;
-           if (sizeof(serialModesNum)==4)
-             return pgm_read_dword_near(&serialModes_P[i].mode);
-           else 
-             return pgm_read_word_near(&serialModes_P[i].mode);
-         }
-  debugSerial<< F("Default serial mode N81 used");
-  return static_cast<serialParamType> (SERIAL_8N1);
-}
-*/
 uint16_t swap (uint16_t x) {return  ((x & 0xff) << 8) | ((x & 0xff00) >> 8);}
 
 int  str2regSize(char * str)
@@ -223,6 +184,7 @@ switch (regType) {
         break;
     default:
         debugSerial<<F("MBUS: Not supported reg type\n");
+        return false;
  }
 mbusSlenceTimer = millisNZ(); 
 if (result != node.ku8MBSuccess) errorSerial<<F("MBUS: Polling error ")<<_HEX(result)<<endl;
@@ -341,30 +303,41 @@ itemCmd out_Modbus::findRegister(uint16_t registerNum, uint16_t posInBuffer, uin
                               switch (defMappingObj->type)
                                {
                                 case aJson_Int: //register/coil/.. number
-                                  debugSerial<<F("Searching reg#")<<defMappingObj->valueint<<endl; 
+                                  traceSerial<<F("MBUSD: Searching reg#")<<defMappingObj->valueint<<endl; 
                                   if ((defMappingObj->valueint>= registerFrom) && (defMappingObj->valueint<=registerTo))  
                                       {   
                                       mappedParam = findRegister(defMappingObj->valueint,defMappingObj->valueint-registerFrom,regType,registerFrom,registerTo,false,&submitRecurrentOut);
                                       executeWithoutCheck=true;
+                                      debugSerial<<"MBUSD: recurrent check res: "<<"SRO:"<<submitRecurrentOut<<endl;
                                       }
-                                  else errorSerial<<F("reg# out of range")<<endl;    
+                                  else 
+                                  {
+                                  debugSerial<<F("def reg# ")<<defMappingObj->valueint<<F(" out of range buffer, fetching")<<endl;    
+                                  ////to prevent CORRUPTION if using same buffer
+                                  uint16_t localBuffer;
+                                  node.setResponseBuffer(&localBuffer,1);
+                                  if (readModbus(defMappingObj->valueint,regType,1))
+                                    {
+                                      mappedParam = findRegister(defMappingObj->valueint,0,regType,defMappingObj->valueint,defMappingObj->valueint,false,&submitRecurrentOut);
+                                      executeWithoutCheck=true;
+                                    }
+                                  node.setDefaultResponseBuffer();                                   
+                                  }
 
                                 break;
                                 case aJson_String: // parameter name
-                                 debugSerial<<F("Searching reg: ")<<defMappingObj->valuestring<<endl; 
+                                 traceSerial<<F("Searching reg: ")<<defMappingObj->valuestring<<endl; 
                                  if (itemParametersObj && itemParametersObj->type ==aJson_Object) 
                                     {      
                                       //Searching item param for nested mapping 
                                       aJsonObject *itemParObj = aJson.getObjectItem(itemParametersObj,defMappingObj->valuestring);
                                       if (itemParObj) 
                                           {
-                                            //aJsonObject * markObj = execObj;
-                                            //if (execObj->type == aJson_Array) markObj = execObj->child;  
                                             //Retrive previous data
                                             aJsonObject *lastMeasured = aJson.getObjectItem(itemParObj,"@S");
                                             if (lastMeasured && lastMeasured->type ==aJson_Int)
                                             {
-                                            debugSerial<<F("LastKnown value: ")<<lastMeasured->valueint<<endl; 
+                                            traceSerial<<F("LastKnown value: ")<<lastMeasured->valueint<<endl; 
                                             //Searching template param for nested mapping
                                             aJsonObject * templateParObj = aJson.getObjectItem(store->parameters,defMappingObj->valuestring);
                                               if (templateParObj)
@@ -417,37 +390,7 @@ itemCmd out_Modbus::findRegister(uint16_t registerNum, uint16_t posInBuffer, uin
                                 break;
                                }
                              }                          
-/*
-                          aJsonObject *nextRegObj = NULL;  
-                          int registerType = 0;
-                          
-                          nextRegObj = aJson.getObjectItem(paramObj, "nextreg");
-                          if (nextRegObj) registerType=MODBUS_HOLDING_REG_TYPE;           
-                          else 
-                            {
-                            nextRegObj =  aJson.getObjectItem(paramObj, "nextir");
-                            if (nextRegObj) registerType=MODBUS_INPUT_REG_TYPE;
-                              else 
-                              {
-                              nextRegObj =  aJson.getObjectItem(paramObj, "nextcoil");
-                              if (nextRegObj) registerType=MODBUS_COIL_REG_TYPE;
-                                 else 
-                                  {
-                                  nextRegObj =  aJson.getObjectItem(paramObj, "nextdin");
-                                  if (nextRegObj) registerType=MODBUS_DISCRETE_REG_TYPE;
-                                  }
-                              }      
-                            }
-                                
-                          if (registerType && nextRegObj && (nextRegObj->type) ==aJson_Int && (nextRegObj->valueint>= registerFrom) && (nextRegObj->valueint<=registerTo))  
-                                  { 
-                                  debugSerial<<F("Recurrent searching nextreg")<<endl;   
-                                  mappedParam = findRegister(nextRegObj->valueint,nextRegObj->valueint-registerFrom,registerType,registerFrom,registerTo,false,&submitRecurrentOut);
-                                  executeWithoutCheck=true;
-                                  }
-                          else errorSerial<<F("nextreg out of range")<<endl;    
-       */                   
-                          }  
+             }  
                         else   
                            traceSerial << F("MBUSD: Mapped:")<<mappedParam.toString(buf,sizeof(buf))<<endl; 
                     } //mapping       
@@ -468,38 +411,67 @@ itemCmd out_Modbus::findRegister(uint16_t registerNum, uint16_t posInBuffer, uin
                           aJsonObject *execObj = aJson.getObjectItem(itemParametersObj,paramObj->name);
                           if (execObj) 
                                       {
-                                      aJsonObject * markObj = execObj;
-                                      if (execObj->type == aJson_Array) markObj = execObj->child;  
-                                      //Retrive previous data
-                                      aJsonObject *lastMeasured = aJson.getObjectItem(markObj,"@S");
-                                      if (lastMeasured)
-                                      { 
-                                                if   (lastMeasured->type == aJson_Int)
-                                                  {
-                                                  if   (lastMeasured->valueint == param)
-                                                        *submitParam=false; //supress repeating execution for same val
-                                                  else  
-                                                        {
-                                                        lastMeasured->valueint=param;
-                                                        lastMeasured->subtype&=~MB_VALUE_OUTDATED;
-                                                        }
-                                                  }
-                                      }            
-                                      else //No container to store value yet 
-                                      {
-                                        debugSerial<<F("MBUS: Add @S: ")<<paramObj->name<<endl;
-                                        aJson.addNumberToObject(markObj, "@S", (long) param);
-                                      }  
 
+                                      bool storeLastValue = true;
+                                      if (doExecution)  
+                                      {
+                                      storeLastValue=false;
+                                      // Check - if no action configured for object - not need to store last value - let requrent process do it
+                                      
+                                      aJsonObject * i = execObj->child;  
+                                      while (i && !storeLastValue)
+                                        {
+                                          if (i->name && *i->name && (*i->name != '@')) storeLastValue = true;
+                                          i=i->next;
+                                        }
+                                      }
+
+                                      aJsonObject * markObj = execObj;
+                                      if (execObj->type == aJson_Array) 
+                                            {
+                                            markObj = execObj->child;  
+                                            storeLastValue = true;
+                                            }
+
+                                      if (storeLastValue)
+                                      {      
+                                                    //Retrive previous data
+                                                    aJsonObject *lastMeasured = aJson.getObjectItem(markObj,"@S");
+                                                    if (lastMeasured)
+                                                    { 
+                                                              if   (lastMeasured->type == aJson_Int)
+                                                                {
+                                                                if   (lastMeasured->valueint == param)
+                                                                      *submitParam=false; //supress repeating execution for same val
+                                                                else  
+                                                                      {
+                                                                      lastMeasured->valueint=param;
+                                                                      traceSerial<<"MBUS: Stored "<<param<<" to @S of "<<paramObj->name<<endl;
+                                                                      lastMeasured->subtype&=~MB_VALUE_OUTDATED;
+                                                                      }
+                                                                }
+                                                    }            
+                                                    else //No container to store value yet 
+                                                    {
+                                                      debugSerial<<F("MBUS: Add @S: ")<<paramObj->name<<endl;
+                                                      aJson.addNumberToObject(markObj, "@S", (long) param);
+                                                    }  
+                                      }
 
                                        if (executeWithoutCheck)
                                             {
                                             
-                                            if (doExecution && (submitRecurrentOut || *submitParam)) executeCommand(execObj, -1, mappedParam); 
+                                            if (doExecution && (submitRecurrentOut || *submitParam)) 
+                                                  {
+                                                  //debugSerial<<F("MBUS: exec ");mappedParam.debugOut();  
+                                                  executeCommand(execObj, -1, mappedParam); 
+                                                  *submitParam=true; //if requrrent check has submit smth - report it.  
+                                                  }
+                                                
                                             return mappedParam;  
                                             }
 
-                                      if (*submitParam)                                       
+                                      if (*submitParam && doExecution)                                       
                                       {   
                                       // Compare with last submitted val (if @V NOT marked as NULL in config)
                                        aJsonObject *settedValue = aJson.getObjectItem(markObj,"@V");                      
@@ -510,7 +482,11 @@ itemCmd out_Modbus::findRegister(uint16_t registerNum, uint16_t posInBuffer, uin
                                           }  
                                         else 
                                           {
-                                          if (doExecution) executeCommand(execObj, -1, mappedParam);
+                                          if (doExecution) 
+                                                    {
+                                                    //debugSerial<<F("MBUS: exec ");mappedParam.debugOut();    
+                                                    executeCommand(execObj, -1, mappedParam);
+                                                    }
                                           // if param updated by device and no new value queued to send - update @V to avoid "Ignored - equal with setted val" 
                                           if (settedValue && !(execObj->subtype & MB_NEED_SEND)) 
                                               settedValue->valueint=param;
@@ -518,6 +494,7 @@ itemCmd out_Modbus::findRegister(uint16_t registerNum, uint16_t posInBuffer, uin
                                       }
                                       }
                           }
+                    //if (submitRecurrentOut) *submitParam=true; //if requrrent check has submit smth - report it.      
                     return mappedParam;
                     }
             paramObj=paramObj->next;
@@ -550,7 +527,7 @@ return itemCmd();
                   int registerTo=aJson.getArrayItem(reg, 1)->valueint;
 
                   if (readModbus(registerFrom,regType,registerTo-registerFrom+1))
-                    { debugSerial<<endl;
+                    { traceSerial<<endl;
                       for(int i=registerFrom;i<=registerTo;i++)
                         {
                           findRegister(i,i-registerFrom,regType,registerFrom,registerTo);
@@ -582,7 +559,7 @@ void out_Modbus::initLine()
     node.begin(item->getArg(0), modbusSerial);
 }
 
-int out_Modbus::sendModbus(char * paramName, int32_t value, uint8_t regType)
+int out_Modbus::sendModbus(char * paramName, aJsonObject * outValue)
 {
  if (!store) {errorSerial<<F(" internal send error - no store")<<endl; return -1;}
 
@@ -595,45 +572,126 @@ int out_Modbus::sendModbus(char * paramName, int32_t value, uint8_t regType)
     {  
     regObj = aJson.getObjectItem(templateParamObj, "coil");
     if (!regObj) {errorSerial<<F(" internal send error - no reg/coil")<<endl; return -2;}
-       else regType = PAR_COIL;
+       else outValue->subtype = PAR_COIL;
     } 
+ if (regObj->type != aJson_Int) {errorSerial<<F(" Reg/coil must be int")<<endl; return -2;}   
+
+ aJsonObject * prefetchObj = aJson.getObjectItem(templateParamObj, "prefetch");
+ aJsonObject *lastMeasured =  NULL;
 
  int res = -1;
 
-// int8_t    regType = PAR_I16;
-// aJsonObject * typeObj = aJson.getObjectItem(templateParamObj, "type");
-// if (typeObj && typeObj->type == aJson_String) regType=str2regSize(typeObj->valuestring);
+if (prefetchObj && (prefetchObj->type == aJson_Boolean) && prefetchObj->valuebool) 
+                                      {
+                                                      int modbusRegType =  (outValue->subtype == PAR_COIL) ? MODBUS_COIL_REG_TYPE:MODBUS_HOLDING_REG_TYPE;
+                                                      debugSerial<<F(" prefetch ")<<paramName<<F(" #") <<regObj->valueint << " type:" << modbusRegType << " "; 
 
-                    switch(regType) {
+                                                      /// to prevent CORRUPTIOIN if using same buffer
+                                                      uint16_t localBuffer;
+                                                      node.setResponseBuffer(&localBuffer,1);
+
+                                                      bool successRead = readModbus(regObj->valueint,modbusRegType,1);
+                                                      mbusSlenceTimer = millisNZ();   
+                                                      
+
+                                                      if (successRead)
+                                                        {
+                                                          #ifdef PREFETCH_EXEC_IMMEDIALELLY
+                                                          // option to execute if changed immediatelly
+                                                          bool submited = false;
+                                                          findRegister(regObj->valueint,0,modbusRegType,regObj->valueint,regObj->valueint,true,&submited);
+                                                          node.setDefaultResponseBuffer();
+
+                                                          if (submited)
+                                                                {
+                                                                  debugSerial << F("MBUS:")<<paramName<< (" val changed. Write cancelled")<<endl;
+                                                                  return -3;
+                                                                }
+                                                           else   debugSerial << F("MBUS:")<<paramName<< F(" val not changed. Continue")<<endl;  
+                                                           
+                                                          
+                                                          #else
+                                                          // Option to skip writing if change, let next polling take of change           
+                                                          aJsonObject * itemParametersObj = aJson.getArrayItem(item->itemArg, 2);
+                                                          if (itemParametersObj && itemParametersObj->type ==aJson_Object)
+                                                                                    {
+                                                                                    aJsonObject *execObj = aJson.getObjectItem(itemParametersObj,paramName);
+                                                                                    if (execObj) 
+                                                                                                {
+                                                                                                aJsonObject * markObj = execObj;
+                                                                                                if (execObj->type == aJson_Array) markObj = execObj->child;  
+                                                                                                //Retrive previous data
+                                                                                                lastMeasured = aJson.getObjectItem(markObj,"@S");
+                                                                                                if (lastMeasured)
+                                                                                                { 
+                                                                                                          if   (lastMeasured->type == aJson_Int)
+                                                                                                            {
+                                                                                                            traceSerial<<F(" Last:")<<lastMeasured->valueint<< F(" Now:") << localBuffer<<endl;
+
+                                                                                                            if   (lastMeasured->valueint != localBuffer)
+                                                                                                                  {
+                                                                                                                    debugSerial << F("MBUS:")<<paramName<< F(" val changed.")<<endl;
+                                                                                                                    node.setDefaultResponseBuffer();
+                                                                                                                    return -3;
+                                                                                                                  }
+                                                                                                            else  
+                                                                                                                  {
+                                                                                                                  if (outValue->valueint == localBuffer)
+                                                                                                                  {
+                                                                                                                    debugSerial << F("MBUS:")<<paramName<< F("=")<<localBuffer<<F(": equal targert.")<<endl;
+                                                                                                                    node.setDefaultResponseBuffer();
+                                                                                                                    return -4;
+                                                                                                                  }
+
+                                                                                                                  debugSerial << F("MBUS:")<<paramName<< F(" val not changed. Continue")<<endl;  
+                                                                                                                  }
+                                                                                                            }
+                                                                                                }            
+                                                                                                }
+                                                                                    }
+                                                        #endif  
+                                                       }
+                                                       node.setDefaultResponseBuffer();
+                                                      
+
+                                      }
+
+
+                    switch(outValue->subtype) {
                       case PAR_U16:
                       case PAR_I16:  
                       case PAR_TENS:
                       case PAR_100:
-                      res = node.writeSingleRegister(regObj->valueint,value);
+                      res = node.writeSingleRegister(regObj->valueint,outValue->valueint);
                       break;
             
                       break;
                       case PAR_I32:
                       case PAR_U32:
-                      res = node.writeSingleRegister(regObj->valueint,swap(value & 0xFFFF));
-                      res += node.writeSingleRegister(regObj->valueint+1,swap(value >> 16)) ;
+                      res = node.writeSingleRegister(regObj->valueint,swap(outValue->valueint & 0xFFFF));
+                      res += node.writeSingleRegister(regObj->valueint+1,swap(outValue->valueint >> 16)) ;
                       break;
 
                       case PAR_U8L:
                       case PAR_I8L:
-                      res = node.writeSingleRegister(regObj->valueint,value & 0xFF);                 
+                      res = node.writeSingleRegister(regObj->valueint,outValue->valueint & 0xFF);                 
                       break;
 
                       case PAR_U8H:
                       case PAR_I8H:
-                      res = node.writeSingleRegister(regObj->valueint,(value & 0xFFFF)>> 8);
+                      res = node.writeSingleRegister(regObj->valueint,(outValue->valueint & 0xFFFF)>> 8);
                       break;
                       case PAR_COIL:
-                      res = node.writeSingleCoil (regObj->valueint,value);
+                      res = node.writeSingleCoil (regObj->valueint,outValue->valueint);
                       break;
                     }
  mbusSlenceTimer = millisNZ();                   
- debugSerial<<F("Res: ")<<res<<F(" ")<<paramName<<" reg:"<<regObj->valueint<<F(" val:")<<value<<endl;
+ debugSerial<<F("MBUS res: ")<<res<<F(" ")<<paramName<<" reg:"<<regObj->valueint<<F(" val:")<<outValue->valueint<<endl;
+
+//If wrote - suppress action on poll 
+if ((res ==0) && (outValue->type == aJson_Int) && lastMeasured && (lastMeasured->type == aJson_Int)) lastMeasured->valueint = outValue->valueint;
+
+
  return ( res == 0);
 }
 
@@ -642,7 +700,7 @@ int out_Modbus::Poll(short cause)
 if (cause==POLLING_SLOW) return 0;  
 bool lineInitialized = false;  
 
-if (modbusBusy || (Status() != CST_INITIALIZED) || ( mbusSlenceTimer && !isTimeOver(mbusSlenceTimer,millis(),100))) return 0;
+if (modbusBusy || (Status() != CST_INITIALIZED) || ( mbusSlenceTimer && !isTimeOver(mbusSlenceTimer,millis(),200))) return 0;
 
 aJsonObject * itemParametersObj = aJson.getArrayItem(item->itemArg, 2);
 if (itemParametersObj && itemParametersObj->type ==aJson_Object)
@@ -667,14 +725,28 @@ if (itemParametersObj && itemParametersObj->type ==aJson_Object)
                                                       lineInitialized=true;  
                                                       initLine();
                                                     }
-                                              debugSerial<<"MBUS: SEND "<<item->itemArr->name<<" ";      
-                                              switch (sendModbus(execObj->name,outValue->valueint,outValue->subtype)) 
+
+                                              int sendRes;
+                                              int savedValue;
+                                              bool needResend;
+                                              do
+                                                  {
+                                                  savedValue = outValue->valueint;  
+                                                  debugSerial<<"MBUS: SEND "<<item->itemArr->name<<" ";   
+                                                  sendRes = sendModbus(execObj->name,outValue);
+                                                  needResend = (savedValue != outValue->valueint);
+                                                  while(needResend && mbusSlenceTimer && !isTimeOver(mbusSlenceTimer,millis(),200)) modbusIdle();
+                                                  }
+                                              while (needResend); //repeat sending if target value changed while we're waited for mbus responce
+
+                                              switch (sendRes) 
                                               {
                                                case 1: //success
-                                                 execObj->subtype&=~ MB_NEED_SEND;
+                                               case -4: //equal tatget
+                                                 //execObj->subtype&=~ MB_NEED_SEND;
+                                                 execObj->subtype = 0;
                                                  onceSendOk=true;
                                                  ///return 1; //relax
-                                                 
                                                  break;
                                                case 0: //fault 
                                                  execObj->subtype |= MB_SEND_ERROR;  
@@ -682,6 +754,12 @@ if (itemParametersObj && itemParametersObj->type ==aJson_Object)
                                                  if ((execObj->subtype & 3) != MB_SEND_ATTEMPTS) execObj->subtype++;
                                                  errorSerial<<"Attempt: "<< (execObj->subtype & 3) <<endl;
                                                  break;
+                                               case -3:
+                                                 errorSerial<<F("MBUS:  param ")<<execObj->name<<F(" sending cancelled")<<endl;
+                                                 //outValue->valueint=
+                                                 //execObj->subtype&=~ MB_NEED_SEND; 
+                                                 execObj->subtype = 0;
+                                                 break;                                              
                                                default: //param not found
                                                  errorSerial<<F("MBUS:  param ")<<execObj->name<<F(" not found")<<endl;
                                                  execObj->subtype&=~ MB_NEED_SEND;
@@ -694,7 +772,7 @@ if (itemParametersObj && itemParametersObj->type ==aJson_Object)
            }
   
 
-if (isTimeOver(store->timestamp,millis(),store->pollingInterval) && ( !mbusSlenceTimer || isTimeOver(mbusSlenceTimer,millis(),100)))
+if (isTimeOver(store->timestamp,millis(),store->pollingInterval) && ( !mbusSlenceTimer || isTimeOver(mbusSlenceTimer,millis(),200)))
 {
 
 // Clean_up FLAG_SEND_ERROR flag 
@@ -768,6 +846,7 @@ int8_t    regType = PAR_I16;
 aJsonObject * typeObj = aJson.getObjectItem(templateParamObj, "type");
 aJsonObject * mapObj = aJson.getObjectItem(templateParamObj, "map");
 
+
                     if (typeObj && typeObj->type == aJson_String) regType=str2regSize(typeObj->valuestring);
                     switch(regType) {
                       case PAR_I16:
@@ -801,20 +880,14 @@ if (itemParametersObj && itemParametersObj->type ==aJson_Object)
             aJsonObject *execObj =  aJson.getObjectItem(itemParametersObj,suffixStr); 
             if (execObj && ((execObj->type == aJson_Object) || (execObj->type == aJson_Array)))
                           {   
-                            /*
-                              aJsonObject *polledValue = aJson.getObjectItem(execObj,"@S");                      
-                                      if (polledValue && polledValue->type == aJson_Int && (polledValue->valueint == Value))
-                                          {    
-                                           debugSerial<<F("Ignored - not changed")<<endl;
-                                          }
 
-                                      else */
-                                      { //Schedule update
+                                      
+                                      aJsonObject * markObj = execObj;
+                                      if (execObj->type == aJson_Array) markObj = execObj->child;
+
+                                       //Schedule update
                                         execObj->subtype |= MB_NEED_SEND;
 
-                                        aJsonObject * markObj = execObj;
-                                        if (execObj->type == aJson_Array) markObj = execObj->child;
-
                                         aJsonObject *outValue = aJson.getObjectItem(markObj,"@V");                      
                                         if (outValue) // Existant. Preserve original @type
                                             {    
@@ -829,15 +902,17 @@ if (itemParametersObj && itemParametersObj->type ==aJson_Object)
                                               outValue = aJson.getObjectItem(markObj,"@V");  
                                               if (outValue) outValue->subtype =regType & 0xF; 
                                             }
-
+/* Conflict with pre-fetching
                                         aJsonObject *polledValue = aJson.getObjectItem(markObj,"@S"); 
                                         if (polledValue && outValue->type == aJson_Int) 
                                                                 {
+                                                                traceSerial<<"MBUS: not Stored "<<Value<<" to @S of "<<item->itemArr->name<<":"<<templateParamObj->name<<endl;  
                                                                 polledValue->valueint=Value; //to pevent suppressing to change back to previously polled value if this occurs before next polling
                                                                 polledValue->subtype&=~MB_VALUE_OUTDATED;
                                                                 }
+     */                                                           
 
-                                      }          
+                                                
                            }  
            }
 return 1;  

lighthub/modules/out_modbus.h

@@ -47,7 +47,7 @@ protected:
     itemCmd  findRegister(uint16_t registerNum, uint16_t posInBuffer, uint8_t regType, uint16_t registerFrom, uint16_t registerTo, bool doExecution = true, bool * submitParam = NULL);
     void pollModbus(aJsonObject * reg, int regType);
     void initLine();
-    int  sendModbus(char * paramName, int32_t value, uint8_t regType);
+    int  sendModbus(char * paramName, aJsonObject * outValue);
     int  sendItemCmd(aJsonObject *templateParamObj, itemCmd cmd);
 };
 #endif

lighthub/modules/out_multivent.cpp

@@ -1,249 +1,252 @@
-#ifndef MULTIVENT_DISABLE
-
-#include "modules/out_multivent.h"
-#include "Arduino.h"
-#include "options.h"
-#include "Streaming.h"
-
-#include "item.h"
-#include "main.h"
-
-
-void out_Multivent::getConfig()
-{
- gatesObj = NULL;
-  if (!item || !item->itemArg || item->itemArg->type != aJson_Object) return;
- gatesObj = item->itemArg;
-  }
-
-int  out_Multivent::Setup()
-{
-abstractOut::Setup();    
-//getConfig();
-
-//Expand Argument storage to 2
-//for (int i = aJson.getArraySize(item->itemArg); i < 2; i++)
-//            aJson.addItemToArray(item->itemArg, aJson.createItem( (long int) 0));
-
-//Allocate objects to store persistent data in config tree
-if (gatesObj /*&& aJson.getArraySize(item->itemArg)>=2*/)
-      {
-      aJsonObject * i = gatesObj->child;            
-      while (i)
-          {
-             if (i->name && *i->name)
-             {
-             aJsonObject  * setObj = aJson.getObjectItem(i, "set");
-             if (!setObj) aJson.addNumberToObject(i, "set", (long int) -1);
-
-             aJsonObject  * cmdObj  = aJson.getObjectItem(i, "cmd");
-             if (!cmdObj) aJson.addNumberToObject(i, "cmd", (long int) -1);
-
-             aJsonObject * outObj = aJson.getObjectItem(i, "out");
-             if (!outObj) aJson.addNumberToObject(i, "out", (long int) -1);
-             } 
-             i=i->next; 
-          }
-      debugSerial << F ("MultiVent init")<< endl;
-      setStatus(CST_INITIALIZED);
-      return 1;
-      }
-
-debugSerial << F ("MultiVent config failed")<< endl;
-return 0;
-
-}
-
-int  out_Multivent::Stop()
-{
-debugSerial << F ("Multivent De-Init") << endl;
-setStatus(CST_UNKNOWN);
-return 1;
-}
-
-int out_Multivent::Poll(short cause)
-{
-return 0;
-};
-
-int out_Multivent::getChanType()
-{
-   return CH_PWM;
-}
-
-
-int out_Multivent::Ctrl(itemCmd cmd,   char* subItem , bool toExecute, bool authorized)
-{
-
-if (cmd.getCmd()==CMD_DISABLE || cmd.getCmd()==CMD_ENABLE) return 0;
-int suffixCode = cmd.getSuffix();
-if (cmd.isCommand() && !suffixCode) suffixCode=S_CMD; //if some known command find, but w/o correct suffix - got it
-
-aJsonObject * i = NULL;
-
-if (cmd.isCommand() && cmd.getSuffix()==S_FAN)
-      switch (cmd.getCmd())
-          {
-          case CMD_HIGH:
-          cmd.Percents255(255);
-          break;
-
-          case CMD_MED:
-          cmd.Percents255(128);
-          break;
-
-          case CMD_LOW:
-          cmd.setPercents(10);
-          break;
-
-} //switch cmd
-
-
-if (gatesObj) i = gatesObj->child; // Pass 1 - calculate summ air value, max value etc
-
-int activeV = 0;
-int totalV  = 0;
-int maxV=0;
-int maxRequestedV=0;
-int maxPercent=0;
-
-
-while (i)
-{
-
-  aJsonObject * setObj=aJson.getObjectItem(i, "set");
-  aJsonObject * cmdObj=aJson.getObjectItem(i, "cmd");
-  aJsonObject * cascadeObj=aJson.getObjectItem(i, "cas");
-   if (setObj && cmdObj && setObj->type==aJson_Int && cmdObj->type==aJson_Int) 
-   {
-
-      int V         =aJson.getObjectItem(i,"V")->valueint;
-      int requestedV=0;
-
-      if (subItem && !strcmp (i->name,subItem)) 
-              {
-              if (cmdObj && cmd.isCommand()) 
-                                          {
-                                          cmdObj->valueint = cmd.getCmd();
-                                          //publishTopic(i->name,cmdObj->valueint,"/set");
-                                          switch (cmd.getCmd())
-                                          {
-                                            case CMD_ON:
-                                            cmd.Percents255(setObj->valueint);
-                                            break;
-                                            case CMD_OFF:
-                                            cmd.Percents255(0);
-                                          }
-                                          if (isNotRetainingStatus() && (cmdObj->valueint == CMD_ON) && (setObj->valueint<20))
-                                                                  {
-                                                                    setObj->valueint=30;
-                                                                    cmd.Percents255(30);
-                                                                    //if (isNotRetainingStatus()) item->SendStatusImmediate(cmd,FLAG_PARAMETERS,i->name);
-                                                                  }
-
-                                          if (isNotRetainingStatus()) item->SendStatusImmediate(cmd,FLAG_COMMAND|FLAG_PARAMETERS,i->name);
-                                          }
-
-              else if (setObj && cmdObj && suffixCode == S_FAN && cmd.isValue())   
-                                          {
-                                          if (cmd.getInt())
-                                                {
-
-                                                if (cmdObj->valueint == CMD_OFF || cmdObj->valueint == -1) 
-                                                    { 
-                                                     debugSerial<<"Turning ON"<<endl;
-                                                     cmdObj->valueint = CMD_ON; 
-                                                     cmd.Cmd(CMD_ON);
-                                                     //if (isNotRetainingStatus()) item->SendStatusImmediate(itemCmd().Cmd(CMD_ON),FLAG_COMMAND,i->name);
-                                                        } 
-                                                
-                                                setObj->valueint = cmd.getInt();
-                                                }
-                                           else
-                                                {
-                                             if (cmdObj->valueint != CMD_OFF && cmdObj->valueint != -1)  
-                                                    { debugSerial<<"Turning OFF"<<endl; 
-                                                      cmdObj->valueint = CMD_OFF; 
-                                                      cmd.Cmd(CMD_OFF);
-                                                      //if (isNotRetainingStatus()) item->SendStatusImmediate(itemCmd().Cmd(CMD_OFF),FLAG_COMMAND,i->name);
-                                                        } 
-              
-                                                setObj->valueint = 0;
-                                                }
-
-                                           if (isNotRetainingStatus()) item->SendStatusImmediate(cmd,FLAG_PARAMETERS|FLAG_COMMAND,i->name);
-                                          }
-
-              else if (setObj && cmd.isValue())   
-                                          {
-                                          setObj->valueint = cmd.getPercents255();
-                                          //publishTopic(i->name,setObj->valueint,"/set");
-                                          if (isNotRetainingStatus()) item->SendStatusImmediate(cmd,FLAG_PARAMETERS,i->name);
-                                          }
-              if (cascadeObj) executeCommand(cascadeObj,-1,cmd);                           
-              }
-
-      if (cmdObj->valueint != CMD_OFF && cmdObj->valueint != -1) 
-                      { 
-                      requestedV=V*setObj->valueint;
-                      activeV+=requestedV;
-
-                            if (setObj->valueint>maxPercent )
-                                  {
-                                  maxRequestedV=requestedV;
-                                  maxV=V;
-                                  maxPercent=setObj->valueint;
-                                  }
-                      }
-      totalV+=V;
-
-   }
-  i=i->next;
-}
-
-if (!totalV) return 0;
-
-int fanV=activeV/totalV;
-debugSerial << F("Total V:")<<totalV<<F(" active V:")<<activeV/255<< F(" fan%:")<<fanV<< F(" Max request:")<<maxRequestedV/255 <<F(" from ")<<maxV<<F(" m3")<< endl;
-
-executeCommand(aJson.getObjectItem(gatesObj, ""),-1,itemCmd().Percents255(fanV).Cmd((fanV)?CMD_ON:CMD_OFF));
-
-//Move gates only if fan is actually on
-if (!fanV) return 1;
-
-i=NULL;
-if (gatesObj) i = gatesObj->child; //Pass 2: re-distribute airflow
-
-while (i)
-{
-  int V  =aJson.getObjectItem(i,"V")->valueint;
-
-  aJsonObject * outObj=aJson.getObjectItem(i, "out"); 
-  aJsonObject * setObj=aJson.getObjectItem(i, "set");
-  aJsonObject * cmdObj=aJson.getObjectItem(i, "cmd");
-
-  if (outObj && setObj && cmdObj && outObj->type==aJson_Int && setObj->type==aJson_Int && cmdObj->type==aJson_Int && V) 
-  {
-         long int out = 0;
-        if (cmdObj->valueint != CMD_OFF && cmdObj->valueint != -1 && maxRequestedV) 
-          {
-            int requestedV=V*setObj->valueint;
-            out = (( long)requestedV*255L)/(( long)V)*( long)maxV/( long)maxRequestedV;
-            debugSerial<<i->name<<(" Req:")<<requestedV/255<<F(" Out:")<<out<<endl;
-          } 
-
-         
-            if ((out != outObj->valueint))
-                {
-                  //report out
-                  executeCommand(i,-1,itemCmd().Percents255(out)); 
-                  outObj->valueint=out;
-                }
-  }        
-  i=i->next;
-}
-
-return 1;
-}
-
-#endif
+#ifndef MULTIVENT_DISABLE
+
+#include "modules/out_multivent.h"
+#include "Arduino.h"
+#include "options.h"
+#include "Streaming.h"
+
+#include "item.h"
+#include "main.h"
+
+
+void out_Multivent::getConfig()
+{
+ gatesObj = NULL;
+  if (!item || !item->itemArg || item->itemArg->type != aJson_Object) return;
+ gatesObj = item->itemArg;
+  }
+
+int  out_Multivent::Setup()
+{
+abstractOut::Setup();    
+//getConfig();
+
+//Expand Argument storage to 2
+//for (int i = aJson.getArraySize(item->itemArg); i < 2; i++)
+//            aJson.addItemToArray(item->itemArg, aJson.createItem( (long int) 0));
+
+//Allocate objects to store persistent data in config tree
+if (gatesObj /*&& aJson.getArraySize(item->itemArg)>=2*/)
+      {
+      aJsonObject * i = gatesObj->child;            
+      while (i)
+          {
+             if (i->name && *i->name)
+             {
+             aJsonObject  * setObj = aJson.getObjectItem(i, "set");
+             if (!setObj) aJson.addNumberToObject(i, "set", (long int) -1);
+
+             aJsonObject  * cmdObj  = aJson.getObjectItem(i, "cmd");
+             if (!cmdObj) aJson.addNumberToObject(i, "cmd", (long int) -1);
+
+             aJsonObject * outObj = aJson.getObjectItem(i, "out");
+             if (!outObj) aJson.addNumberToObject(i, "out", (long int) -1);
+             } 
+             i=i->next; 
+          }
+      debugSerial << F ("VENT: init")<< endl;
+      setStatus(CST_INITIALIZED);
+      return 1;
+      }
+
+debugSerial << F ("VENT: config failed")<< endl;
+return 0;
+
+}
+
+int  out_Multivent::Stop()
+{
+debugSerial << F ("VENT: De-Init") << endl;
+setStatus(CST_UNKNOWN);
+return 1;
+}
+
+int out_Multivent::Poll(short cause)
+{
+return 0;
+};
+
+int out_Multivent::getChanType()
+{
+   return CH_PWM;
+}
+
+
+int out_Multivent::Ctrl(itemCmd cmd,   char* subItem , bool toExecute, bool authorized)
+{
+
+if (cmd.getCmd()==CMD_DISABLE || cmd.getCmd()==CMD_ENABLE) return 0;
+int suffixCode = cmd.getSuffix();
+if (cmd.isCommand() && !suffixCode) suffixCode=S_CMD; //if some known command find, but w/o correct suffix - got it
+
+aJsonObject * i = NULL;
+
+if (cmd.isCommand() && cmd.getSuffix()==S_FAN)
+      switch (cmd.getCmd())
+          {
+          case CMD_HIGH:
+          cmd.Percents255(255);
+          break;
+
+          case CMD_MED:
+          cmd.Percents255(128);
+          break;
+
+          case CMD_LOW:
+          cmd.setPercents(10);
+          break;
+
+} //switch cmd
+
+
+if (gatesObj) i = gatesObj->child; // Pass 1 - calculate summ air value, max value etc
+
+int activeV = 0;
+int totalV  = 0;
+int maxV=0;
+int maxRequestedV=0;
+int maxPercent=0;
+
+
+while (i)
+{
+
+  aJsonObject * setObj=aJson.getObjectItem(i, "set");
+  aJsonObject * cmdObj=aJson.getObjectItem(i, "cmd");
+  aJsonObject * cascadeObj=aJson.getObjectItem(i, "cas");
+   if (setObj && cmdObj && setObj->type==aJson_Int && cmdObj->type==aJson_Int) 
+   {
+
+      int V         =aJson.getObjectItem(i,"V")->valueint;
+      int requestedV=0;
+
+      if (subItem && !strcmp (i->name,subItem)) 
+              {
+              if (cmdObj && cmd.isCommand()) 
+                                          {
+                                          cmdObj->valueint = cmd.getCmd();
+                                          //publishTopic(i->name,cmdObj->valueint,"/set");
+                                          switch (cmd.getCmd())
+                                          {
+                                            case CMD_ON:
+                                            cmd.Percents255(setObj->valueint);
+                                            break;
+                                            case CMD_OFF:
+                                            cmd.Percents255(0);
+                                          }
+                                          if (isNotRetainingStatus() && (cmdObj->valueint == CMD_ON) && (setObj->valueint<20))
+                                                                  {
+                                                                    setObj->valueint=30;
+                                                                    cmd.Percents255(30);
+                                                                    //if (isNotRetainingStatus()) item->SendStatusImmediate(cmd,FLAG_PARAMETERS,i->name);
+                                                                  }
+
+                                          if (isNotRetainingStatus()) item->SendStatusImmediate(cmd,FLAG_COMMAND|FLAG_PARAMETERS,i->name);
+                                          }
+
+              else if (setObj && cmdObj && suffixCode == S_FAN && cmd.isValue())   
+                                          {
+                                          if (cmd.getInt())
+                                                {
+
+                                                if (cmdObj->valueint == CMD_OFF || cmdObj->valueint == -1) 
+                                                    { 
+                                                     debugSerial<<"VENT: Turning ON"<<endl;
+                                                     cmdObj->valueint = CMD_ON; 
+                                                     cmd.Cmd(CMD_ON);
+                                                     //if (isNotRetainingStatus()) item->SendStatusImmediate(itemCmd().Cmd(CMD_ON),FLAG_COMMAND,i->name);
+                                                        } 
+                                                
+                                                setObj->valueint = cmd.getInt();
+                                                }
+                                           else
+                                                {
+                                             if (cmdObj->valueint != CMD_OFF && cmdObj->valueint != -1)  
+                                                    { debugSerial<<"VENT: Turning OFF"<<endl; 
+                                                      cmdObj->valueint = CMD_OFF; 
+                                                      cmd.Cmd(CMD_OFF);
+                                                      //if (isNotRetainingStatus()) item->SendStatusImmediate(itemCmd().Cmd(CMD_OFF),FLAG_COMMAND,i->name);
+                                                        } 
+              
+                                                setObj->valueint = 0;
+                                                }
+
+                                           if (isNotRetainingStatus()) item->SendStatusImmediate(cmd,FLAG_PARAMETERS|FLAG_COMMAND,i->name);
+                                          }
+
+              else if (setObj && cmd.isValue())   
+                                          {
+                                          setObj->valueint = cmd.getPercents255();
+                                          //publishTopic(i->name,setObj->valueint,"/set");
+                                          if (isNotRetainingStatus()) item->SendStatusImmediate(cmd,FLAG_PARAMETERS,i->name);
+                                          }
+              if (cascadeObj) executeCommand(cascadeObj,-1,cmd);                           
+              }
+
+      if (cmdObj->valueint != CMD_OFF && cmdObj->valueint != -1) 
+                      { 
+                      requestedV=V*setObj->valueint;
+                      activeV+=requestedV;
+
+                            if (setObj->valueint>maxPercent )
+                                  {
+                                  maxRequestedV=requestedV;
+                                  maxV=V;
+                                  maxPercent=setObj->valueint;
+                                  }
+                      }
+      totalV+=V;
+
+   }
+  i=i->next;
+}
+
+if (!totalV) return 0;
+
+int fanV=activeV/totalV;
+debugSerial << F("VENT: Total V:")<<totalV<<F(" active V:")<<activeV/255<< F(" fan%:")<<fanV<< F(" Max req:")<<maxRequestedV/255 <<F(" from ")<<maxV<<F(" m3")<< endl;
+
+//executeCommand(aJson.getObjectItem(gatesObj, ""),-1,itemCmd().Percents255(fanV).Cmd((fanV)?CMD_ON:CMD_OFF));
+if (fanV)
+  executeCommand(aJson.getObjectItem(gatesObj, ""),-1,itemCmd().Percents255(fanV).Cmd(CMD_ON));
+else
+  executeCommand(aJson.getObjectItem(gatesObj, ""),-1,itemCmd().Percents255(fanV));
+//Move gates only if fan is actually on
+if (!fanV) return 1;
+
+i=NULL;
+if (gatesObj) i = gatesObj->child; //Pass 2: re-distribute airflow
+
+while (i)
+{
+  int V  =aJson.getObjectItem(i,"V")->valueint;
+
+  aJsonObject * outObj=aJson.getObjectItem(i, "out"); 
+  aJsonObject * setObj=aJson.getObjectItem(i, "set");
+  aJsonObject * cmdObj=aJson.getObjectItem(i, "cmd");
+
+  if (outObj && setObj && cmdObj && outObj->type==aJson_Int && setObj->type==aJson_Int && cmdObj->type==aJson_Int && V) 
+  {
+         long int out = 0;
+        if (cmdObj->valueint != CMD_OFF && cmdObj->valueint != -1 && maxRequestedV) 
+          {
+            int requestedV=V*setObj->valueint;
+            out = (( long)requestedV*255L)/(( long)V)*( long)maxV/( long)maxRequestedV;
+            debugSerial<<F("VENT: ")<<i->name<<F(" Req:")<<requestedV/255<<F(" Out:")<<out<<endl;
+          } 
+
+         
+            if ((out != outObj->valueint))
+                {
+                  //report out
+                  executeCommand(i,-1,itemCmd().Percents255(out)); 
+                  outObj->valueint=out;
+                }
+  }        
+  i=i->next;
+}
+
+return 1;
+}
+
+#endif

lighthub/modules/out_pid.cpp

@@ -171,7 +171,7 @@ if (store && store->pid && (Status() == CST_INITIALIZED) && item && (item->getCm
       if (store->alarmArmed) debugSerial << F(" <ALM>"); 
       debugSerial<<endl;
       
-      if (((abs(store->output-store->prevOut)>OUTPUT_TRESHOLD) || (item->getFlag(FLAG_ACTION_NEEDED))) && !store->alarmArmed)
+      if (( (NOT_FILTER_PID_OUT || (abs(store->output-store->prevOut)>OUTPUT_TRESHOLD))  || (item->getFlag(FLAG_ACTION_NEEDED))) && !store->alarmArmed)
           { 
             aJsonObject * oCmd = aJson.getArrayItem(item->itemArg, 1);
 
@@ -334,32 +334,38 @@ case S_CTRL:
       switch (command)
           {
           case CMD_OFF:
-            //value.Percents255(0);
-
+             if (isNotRetainingStatus()) executeCommand(oCmd,-1,itemCmd().Cmd(CMD_DISABLE)); // Not actually disable, just inform depended systems, that no autoreg now (for pannels indication)
+          executeCommand(oCmd,-1,value); 
+          item->SendStatus(FLAG_FLAGS);
+          return 1;  
           case CMD_ON:
           case CMD_HEAT:
           case CMD_COOL:
           case CMD_AUTO:
           case CMD_FAN:
           case CMD_DRY:
-
-          executeCommand(oCmd,-1,value); 
           executeCommand(oCmd,-1,itemCmd().Cmd((item->getFlag(FLAG_DISABLED))?CMD_DISABLE:CMD_ENABLE));
+          executeCommand(oCmd,-1,value); 
           item->SendStatus(FLAG_FLAGS);
           return 1;
 
           case CMD_ENABLE:
-          //item->setCmd(CMD_ENABLE);
-          //item->SendStatus(FLAG_COMMAND);
+          if (isNotRetainingStatus()) 
+                {
+                  item->setCmd(CMD_ON);
+                  item->SendStatus(FLAG_COMMAND);
+                }
           item->setFlag(FLAG_ACTION_NEEDED);
-          executeCommand(oCmd,-1,value);   
+          executeCommand(oCmd,-1,value);
+          if (isActive()) executeCommand(oCmd,-1,itemCmd().Cmd((CMD_ON)));   
+       
+
           store->prevOut=-2.0;   
           return 1;
 
           case CMD_DISABLE:
-          //item->setCmd(CMD_DISABLE);
-          //item->SendStatus(FLAG_COMMAND);
           executeCommand(oCmd,-1,value);
+          if (!isActive()) executeCommand(oCmd,-1,itemCmd().Cmd((CMD_OFF))); 
           return 1;
 /*
           case CMD_OFF:

lighthub/modules/out_pwm.cpp

@@ -125,10 +125,13 @@ switch (cmd.getCmd()){
  switch (cType)
   {
     case CH_PWM:
-          { short k;
+          { short k ;
             if (authorized || !isProtectedPin(iaddr))
+                      {
                       analogWrite(iaddr, k=cmd.getPercents255(inverse));
-            debugSerial<<F("Pin:")<<iaddr<<F("=")<<k<<endl;
+                      debugSerial<<F("Pin:")<<iaddr<<F("=")<<k<<endl;
+                      }
+                else  errorSerial<<F("Pin:")<<iaddr<<F(" protected")<<endl;     
             return 1;
           }
     case CH_RGB:

lighthub/modules/out_relay.cpp

@@ -43,7 +43,7 @@ if (item) item->setExt(0);
 //if (item->getCmd()) item->setFlag(FLAG_COMMAND);
 //if (item->itemVal)  item->setFlag(FLAG_PARAMETERS);
 setStatus(CST_INITIALIZED);
-if (item->isActive()>0)  ///????
+if (item && (item->isActive()>0))  ///????
     {
     item->setExt(millisNZ());
     }

lighthub/options.h

@@ -1,6 +1,10 @@
 #pragma once
 #include <Arduino.h>
 
+#ifndef NOT_FILTER_PID_OUT
+#define NOT_FILTER_PID_OUT 1
+#endif
+
 #define DHCP_ATTEMPTS_FALLBACK 3
 #define TENS_FRACT_LEN 2
 #define TENS_BASE 100
@@ -77,16 +81,24 @@
 #define TIMEOUT_REINIT 5000UL
 #define TIMEOUT_RELOAD 30000UL
 #define TIMEOUT_RETAIN 8000UL
+#define TIMEOUT_REINIT_NOT_CONFIGURED 120000UL
 #define INTERVAL_1W 5000UL
 #define PERIOD_THERMOSTAT_FAILED (600 * 1000UL)
 
 //#define T_ATTEMPTS 200
 //#define IET_TEMP     0
 //#define IET_ATTEMPTS 1
-
+#ifndef THERMO_GIST_CELSIUS
 #define THERMO_GIST_CELSIUS 1.
+#endif
+
+#ifndef THERMO_OVERHEAT_CELSIUS
 #define THERMO_OVERHEAT_CELSIUS 38.
+#endif
+
+#ifndef FM_OVERHEAT_CELSIUS
 #define FM_OVERHEAT_CELSIUS 40.
+#endif
 
 #ifndef MIN_VOLUME
 #define MIN_VOLUME 20
@@ -120,6 +132,8 @@
 #define INTERVAL_CHECK_INPUT  11
 #endif
 
+#define INTERVAL_CHECK_ULTRASONIC 100
+
 #ifndef TIMER_CHECK_INPUT
 #define TIMER_CHECK_INPUT  15
 #endif
@@ -129,7 +143,9 @@
 
 #define INTERVAL_SLOW_POLLING 1000
 //#define INTERVAL_POLLING      100
+#ifndef THERMOSTAT_CHECK_PERIOD
 #define THERMOSTAT_CHECK_PERIOD 30000
+#endif
 
 #ifndef OW_UPDATE_INTERVAL
 #define OW_UPDATE_INTERVAL 5000
@@ -368,6 +384,14 @@
 #define PROTECTED_PINS
 #endif
 
+#if not defined DEFAULT_OTA_USERNAME 
+#define DEFAULT_OTA_USERNAME arduino
+#endif
+
+#if not defined DEFAULT_OTA_PASSWORD 
+#define DEFAULT_OTA_PASSWORD password
+#endif
+
 const short protectedPins[]={PROTECTED_PINS};
 #define protectedPinsNum (sizeof(protectedPins)/sizeof(short))
 

lighthub/owTerm.cpp

@@ -26,10 +26,9 @@ e-mail    anklimov@gmail.com
 #include "options.h"
 #include "main.h"
 #include "aJSON.h"
-//#include "twi.h"
 
 extern aJsonObject *owArr;
-extern  uint32_t timerCtr;
+//extern  uint32_t timerCtr;
 aJsonObject *dev2Check = NULL;
 
 OneWire *oneWire = NULL;
@@ -62,7 +61,7 @@ char * getReadableNote(aJsonObject * owObj)
 void processTemp(aJsonObject * owObj, float currentTemp) {
     if (!owObj || !owArr) return;
     char* note = getReadableNote(owObj);   
-    debugSerial<<endl<<F("1WT:")<<currentTemp<<F(" <")<<owObj->name<<F("> ");    
+    debugSerial <<F("1WT:")<<currentTemp<<F(" <")<<owObj->name<<F("> ");    
     if ((currentTemp != -127.0) && (currentTemp != 85.0) && (currentTemp != 0.0))
         {
         if (note) debugSerial<<note;    

lighthub/seekablestream.h

@@ -14,7 +14,7 @@ bool         textMode;
 uint16_t     contentType;
 
 public:
-seekableStream(unsigned int size):Stream(),streamSize(size) {};
+seekableStream(unsigned int size):Stream(),streamSize(size),textMode(false),contentType(0) {};
 virtual bool    checkPermissions(char mode) {return true;};
 unsigned int    getSize() {return streamSize;}
 void            setSize (unsigned int size) {streamSize = size;};
@@ -22,7 +22,7 @@ virtual unsigned int seek(unsigned int _pos = 0) = 0;
 virtual int     open(String _filename, char mode) = 0; 
 virtual void    close() = 0;
 virtual uint16_t getContentType() {return contentType;};
-virtual void    putEOF() {if (textMode) write (EOFchar);};
+virtual void    putEOF() {if (textMode) {write (EOFchar);textMode=false;}};
 };
 
 #endif

lighthub/streamlog.cpp

@@ -28,6 +28,7 @@ Streamlog::Streamlog (SerialPortType * _serialPort, uint8_t _severity,  uint8_t
 {
       serialPort=_serialPort;
       severity=_severity;
+      ledPattern=_ledPattern;
 }
 #endif
 /*

lighthub/systemconfigdata.h

@@ -1,3 +1,4 @@
+#pragma once
 #define SYSCONF_OFFSET 0
 #define EEPROM_offset_NotAlligned SYSCONF_OFFSET+sizeof(systemConfigData)
 #define SYSCONF_SIZE EEPROM_offsetJSON
@@ -5,7 +6,7 @@
 
 #define MAXFLASHSTR 32
 #define PWDFLASHSTR 16
-#define EEPROM_SIGNATURE "LHC1"
+#define EEPROM_SIGNATURE "LHC2"
 #define EEPROM_SIGNATURE_LENGTH 4
 
 //#define EEPROM_offsetJSON IFLASH_PAGE_SIZE
@@ -23,12 +24,12 @@ const char EEPROM_signature[] = EEPROM_SIGNATURE;
                 uint32_t configFlags32bit;
                 struct
                       { 
-                        uint8_t  serialDebugLevel:3; 
+                        uint8_t  serialDebugLevel:4; 
                         uint8_t  notGetConfigFromHTTP:1;
                         uint8_t  udpDebugLevel:3;                   
                         uint8_t  notSaveSuccedConfig:1;
                         uint8_t  dhcpFallback:1;
-                        uint8_t  spare2:7;
+                        uint8_t  spare2:6;
                         uint16_t sysConfigHash;
                       };      
  } systemConfigFlags;

lighthub/templateStr.h

@@ -10,7 +10,7 @@ extern aJsonObject * topics;
 class templateStream : public Stream
 {
 public:
-    templateStream(char *s, short sfx=0) : str(s), pos(0), val(NULL), valpos(0), bucket(0),suffix(sfx) { }
+    templateStream(char *s, short sfx=0) : str(s), pos(0), val(NULL), valpos(0), bucket(0),suffix(sfx) {buffer[0]='\0'; }
 
     // Stream methods
     virtual int available() { return str[pos]; }

lighthub/utils.cpp

@@ -25,10 +25,19 @@ e-mail    anklimov@gmail.com
 #include "main.h"
 
 #include "item.h"
+#if not defined (NOIP)
 #include <PubSubClient.h>
+extern PubSubClient mqttClient;
+extern int8_t ethernetIdleCount;
+#endif
 #include <HardwareSerial.h>
 #include "templateStr.h"
 
+#ifdef CANDRV
+#include <candriver.h>
+extern canDriver LHCAN;
+#endif
+
 #ifdef CRYPT
 #include "SHA256.h"
 #endif
@@ -38,10 +47,6 @@ e-mail    anklimov@gmail.com
 #endif
 
 extern int8_t configLocked;
-extern int8_t ethernetIdleCount;
-extern PubSubClient mqttClient;
-
-
 
 #if defined(__SAM3X8E__) || defined(ARDUINO_ARCH_STM32)
 #include <malloc.h>
@@ -105,7 +110,7 @@ return !err;
 
 // chan is pointer to pointer to string
 // Function return first retrived integer and move pointer to position next after ','
-long getInt(char **chan) {
+long getIntFromStr(char **chan) {
     if (chan && *chan && **chan)
     {
     //Skip non-numeric values
@@ -368,6 +373,21 @@ uint32_t ReadUniqueID( uint32_t * pdwUniqueID )
    
     return  *(uint32_t *)(IFLASH1_ADDR + 128); // dont remove: SAM defect workaround - MPU dont leave Unique Identifier mode until read flash out UID of range 
     
+#elif defined(ARDUINO_ARCH_STM32)
+#define UID_BASE 0x1FFFF7E8
+
+uint16_t *idBase0 = (uint16_t*)(UID_BASE);
+uint16_t *idBase1 = (uint16_t*)(UID_BASE + 0x02);
+uint32_t *idBase2 = (uint32_t*)(UID_BASE + 0x04);
+uint32_t *idBase3 = (uint32_t*)(UID_BASE + 0x08);
+
+pdwUniqueID[0] = *idBase0;
+pdwUniqueID[1] = *idBase1;
+pdwUniqueID[2] = *idBase2;
+pdwUniqueID[3] = *idBase3;
+
+return 1;
+
 #else
 return 0;    
 #endif
@@ -511,9 +531,12 @@ if (_l2 && _l2->type == aJson_String) strncat(buf,_l2->valuestring,buflen);
     strncat_P(buf,inTopic,buflen); /////
     break;
   }
-strncat(buf,"/",buflen);
-if (suffix) strncat(buf,suffix,buflen);
 
+if (tt!=T_ROOT)
+{
+        strncat(buf,"/",buflen);
+        if (suffix) strncat(buf,suffix,buflen);
+}
 return buf;
 
 }
@@ -625,12 +648,13 @@ bool executeCommand(aJsonObject* cmd, int8_t toggle)
   return executeCommand(cmd,toggle,itemCmd());
 }
 
-bool executeCommand(aJsonObject* cmd, int8_t toggle, itemCmd _itemCmd, aJsonObject* defaultItem, aJsonObject* defaultEmit)
+bool executeCommand(aJsonObject* cmd, int8_t toggle, itemCmd _itemCmd, aJsonObject* defaultItem, aJsonObject* defaultEmit, aJsonObject* defaultCan)
 //bool executeCommand(aJsonObject* cmd, int8_t toggle, char* defCmd)
 {
 //char * legacyString =NULL;
 aJsonObject *item = NULL;
 aJsonObject *emit = NULL;
+aJsonObject *can = NULL;
 aJsonObject *icmd = NULL;
 aJsonObject *ecmd = NULL;
 char cmdType = 0;
@@ -645,7 +669,7 @@ switch (cmdType)
   aJsonObject * command = cmd->child;
   while (command)
           {
-          executeCommand(command,toggle,_itemCmd,defaultItem,defaultEmit);
+          executeCommand(command,toggle,_itemCmd,defaultItem,defaultEmit,defaultCan);
           command = command->next;
           }
   configLocked--;
@@ -659,8 +683,7 @@ switch (cmdType)
 
         item = aJson.getObjectItem(cmd, "item");
         emit = aJson.getObjectItem(cmd, "emit");
-    
-
+        can = aJson.getObjectItem(cmd, "can");
         switch (toggle)
             {
             case 0:
@@ -684,6 +707,7 @@ switch (cmdType)
     {
     if (!item) item = defaultItem;
     if (!emit) emit = defaultEmit;
+    if (!can) can = defaultCan;
 
     char * itemCommand = NULL;
     char Buffer[16];
@@ -718,7 +742,7 @@ switch (cmdType)
 
 
 
-
+  #if not defined (NOIP)
     if (emit && emitCommand && emit->type == aJson_String) {
 
     templateStream ts(emit->valuestring,suffix);
@@ -742,13 +766,16 @@ switch (cmdType)
 
    
     //strncpy(addrstr,emit->valuestring,sizeof(addrstr));
+  
     if (mqttClient.connected() && !ethernetIdleCount)
     {
-    if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
+    if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring); ///ChangeMe - if no '/' in addr - template not working
+    
+    debugSerial << F("MQTT: ")<<addrstr<< F(" -> ")<<emitCommand<<endl;  
     mqttClient.publish(addrstr, emitCommand , true);
     }
-
-    } // emit
+} // emit  
+    #endif //NOIP
 
     if (item &&  item->type == aJson_String) {
     //debugSerial <<F("Controlled item:")<< item->valuestring <<endl;
@@ -766,6 +793,16 @@ switch (cmdType)
             else it.Ctrl(_itemCmd);
         }
         }
+
+    #ifdef CANDRV
+
+    if (can)
+    {
+    if (itemCommand) LHCAN.sendCommand(can, itemCmd(itemCommand));
+            else LHCAN.sendCommand(can, _itemCmd);
+    } //else debugSerial << "Exec: noCan"<< endl;
+    #endif
+
     return true;
     }
 default:
@@ -827,7 +864,7 @@ serialParamType  str2SerialParam(char * str)
            {
 
            //debugSerial<< i << F(" ") << pgm_read_word_near(&serialModes_P[i].mode)<< endl;
-           if (sizeof(serialModesNum)==4)
+           if (sizeof(serialParamType)==4)
              return pgm_read_dword_near(&serialModes_P[i].mode);
            else 
              return pgm_read_word_near(&serialModes_P[i].mode);
@@ -940,7 +977,19 @@ return true;
 }
 
 
-
+#ifdef CANDRV
+uint16_t getCRC(aJsonObject * in)
+{
+if (!in)  return 0;
+CRCStream crcStream;
+aJsonStream aJsonCrcStream = aJsonStream(&crcStream);
+//debugSerial<<"CRC: in";
+//debugSerial.print(aJson.print(in));
+aJson.print(in,&aJsonCrcStream,false);
+//debugSerial<<"\nCRC:"<<crcStream.getCRC16();
+return crcStream.getCRC16(); 
+}
+#endif
 
 #pragma message(VAR_NAME_VALUE(debugSerial))
 #pragma message(VAR_NAME_VALUE(SERIAL_BAUD))

lighthub/utils.h

@@ -38,6 +38,7 @@ using namespace ios;
 #endif
 
 enum topicType {
+    T_ROOT = 4,
     T_DEV = 1,
     T_BCST= 2,
     T_OUT = 3
@@ -53,7 +54,7 @@ void PrintBytes(uint8_t* addr, uint8_t count, bool newline);
 void SetBytes(uint8_t* addr, uint8_t count, char * out);
 bool SetAddr(char * in,  uint8_t* addr);
 uint8_t HEX2DEC(char i, bool* err);
-long getInt(char ** chan);
+long getIntFromStr(char **chan);
 itemCmd getNumber(char ** chan);
 unsigned long  freeRam ();
 void parseBytes(const char* str, char separator, byte* bytes, int maxBytes, int base);
@@ -70,7 +71,7 @@ void softRebootFunc();
 bool isTimeOver(uint32_t timestamp, uint32_t currTime, uint32_t time, uint32_t modulo = 0);
 //bool executeCommand(aJsonObject* cmd, int8_t toggle = -1, char* defCmd = NULL);
 bool executeCommand(aJsonObject* cmd, int8_t toggle = -1);
-bool executeCommand(aJsonObject* cmd, int8_t toggle, itemCmd _itemCmd, aJsonObject* defaultItem=NULL, aJsonObject* defaultEmit=NULL);
+bool executeCommand(aJsonObject* cmd, int8_t toggle, itemCmd _itemCmd, aJsonObject* defaultItem=NULL, aJsonObject* defaultEmit=NULL, aJsonObject* defaultCan = NULL);
 itemCmd mapInt(int32_t arg, aJsonObject* map);
 unsigned long millisNZ(uint8_t shift=0);
 serialParamType  str2SerialParam(char * str);
@@ -80,4 +81,26 @@ int  str2regSize(char * str);
 bool checkToken(char * token, char * data);
  bool isProtectedPin(short pin);
  bool i2cReset();
+ uint16_t getCRC(aJsonObject * in);
 
+#ifdef CANDRV
+#include "util/crc16_.h"
+class CRCStream : public Stream
+{
+public:
+    CRCStream() : CRC16(0xFFFF){}
+    uint16_t CRC16;
+    uint16_t getCRC16() {return CRC16;}
+
+    // Stream methods
+    virtual int available(){return 0;};
+    virtual int read(){return 0;};
+    virtual int peek(){return 0;};
+
+    virtual void flush(){};
+    // Print methods
+    virtual size_t write(uint8_t c) {CRC16 = crc16_update(CRC16, c);return 1;};
+    virtual int availableForWrite(){return 1;};
+
+};
+#endif

platformio.ini

@@ -193,7 +193,7 @@ monitor_speed = 115200
 platform = espressif32
 framework = arduino
 monitor_filters = esp32_exception_decoder
-build_type = debug
+;build_type = debug
 board = esp32-evb
 extra_scripts = extra_script.py
 monitor_speed = 115200
@@ -258,7 +258,7 @@ lib_deps =
 	;ArduinoMDNS
 	;ESPmDNS
 	https://github.com/khoih-prog/TimerInterrupt_Generic.git
-
+    https://github.com/anklimov/arduino-CAN.git
 
 [env:due]
 ;Experimental target with universal Ethernet Library
@@ -326,6 +326,8 @@ lib_deps =
 	ArduinoMDNS
 	https://github.com/khoih-prog/TimerInterrupt_Generic.git
 	rweather/Crypto
+	collin80/can_common
+    collin80/due_can
 monitor_speed = 115200
 
 [env:mega2560slim]
@@ -357,6 +359,8 @@ lib_ignore =
 	ModbusMaster
 	ClosedCube HDC1080
 	SparkFun CCS811 Arduino Library
+	;ArduinoOTA
+	ArduinoMDNS
 	;Adafruit BusIO
 	;Adafruit MCP23017 Arduino Library
 	;Adafruit Unified Sensor
@@ -386,7 +390,7 @@ lib_deps =
 	Adafruit MCP23017 Arduino Library
 	Adafruit BusIO
 	br3ttb/PID@^1.2.1
-	ArduinoMDNS
+	;ArduinoMDNS
 	;https://github.com/khoih-prog/TimerInterrupt_Generic.git
 
 monitor_speed = 115200
@@ -521,10 +525,24 @@ lib_deps =
 platform = espressif8266
 framework = arduino
 ;board = nodemcuv2
-board = esp01_1m
+;esp12e             ESP8266  80MHz        4MB      80KB   Espressif ESP8266 ESP-12E
+;esp01_1m           ESP8266  80MHz        1MB      80KB   Espressif Generic ESP8266 ESP-01 1M
 extra_scripts = extra_script.py
-board_build.ldscript = eagle.flash.1m64.ld
-;upload_protocol = esptool
+
+;;;; 1M plug ;;;
+;board = esp01_1m
+;board_build.ldscript = eagle.flash.1m64.ld
+;;;;;;;;;;;;;;;;;;;
+
+;;;; WEMOS D1 ;;;;;
+board = d1_mini
+; change microcontroller
+board_build.mcu = esp8266
+; change MCU frequency
+board_build.f_cpu = 80000000L
+upload_protocol = esptool
+;;;;;;;;;;;;;;;;;;;
+
 ;build_type = debug
 ;monitor_filters = esp8266_exception_decoder
 
@@ -717,6 +735,8 @@ lib_deps =
 	https://github.com/khoih-prog/TimerInterrupt_Generic.git
 	https://github.com/rlogiacco/CircularBuffer
     rweather/Crypto
+	https://github.com/collin80/due_can.git
+	https://github.com/collin80/can_common.git
 monitor_speed = 115200
 
 [env:controllino]
@@ -802,7 +822,6 @@ lib_ignore =
 	DallasTemperature
 	Adafruit Unified Sensor
 	DS2482_OneWire
-	ModbusMaster
 	Syslog
 	;EEPROM
 	ClosedCube HDC1080
@@ -825,6 +844,7 @@ lib_deps =
 	br3ttb/PID@^1.2.1
 	ArduinoMDNS
 	https://github.com/khoih-prog/TimerInterrupt_Generic.git
+	https://github.com/anklimov/ModbusMaster
 
 monitor_speed = 115200
 
@@ -870,7 +890,6 @@ lib_ignore =
 	DallasTemperature
 	Adafruit Unified Sensor
 	DS2482_OneWire
-	ModbusMaster
 	Syslog
 	NRFFlashStorage
 	ClosedCube HDC1080
@@ -893,10 +912,82 @@ lib_deps =
 	br3ttb/PID@^1.2.1
 	ArduinoMDNS
 	https://github.com/khoih-prog/TimerInterrupt_Generic.git
-	;https://github.com/anklimov/ModbusMaster
+	https://github.com/anklimov/ModbusMaster
+	https://github.com/anklimov/ModbusMaster
 
 monitor_speed = 115200
 
+
+[env:stm32-noip]
+platform = ststm32
+board = genericSTM32F103RB
+;olimexino
+board_build.mcu = stm32f103rbt6 
+;STM32Duino
+;generic_stm32f103r 
+;board_build.ldscript=ldscripts\stm32f103rb_bootloader.ld 
+board_build.f_cpu = 72000000L
+framework = arduino
+;board_build.core = maple
+;board_build.core = maple // STM32Duino (DEFAULT) // STM32L0
+;board_build.core = stm32lo
+;monitor_dtr = 1
+upload_protocol = serial
+;debug_tool = cmsis-dap
+build_flags = !python get_build_flags.py stm32-noip
+lib_ignore = 
+   ;DS2482_OneWire   //UNCOMMENT for software 1-wire driver
+	DHT sensor library for ESPx
+	DmxDue
+	DueFlashStorage
+	ESPDMX
+	ESP-Dmx
+	WifiManager
+	FastLED
+	UIPEthernet
+	DMXSerial
+	DmxSimple
+	httpClient
+	SD
+	PrintEx
+	Ethernet2
+	Artnet
+	Ethernet3
+	WebServer
+	ESP_EEPROM
+	DHT sensor library
+	DallasTemperature
+	Adafruit Unified Sensor
+	DS2482_OneWire
+	Syslog
+	NRFFlashStorage
+	ClosedCube HDC1080
+	SparkFun CCS811 Arduino Library
+	M5Stack
+	ArduinoOTA
+lib_deps = 
+    EEPROM
+	https://github.com/anklimov/aJson
+	https://github.com/anklimov/CmdArduino
+;	ArduinoHttpClient
+;	https://github.com/anklimov/pubsubclient.git
+	Streaming
+;	Ethernet
+	
+	Adafruit NeoPixel
+	Adafruit MCP23017 Arduino Library
+	Adafruit BusIO
+	SPI
+	br3ttb/PID@^1.2.1
+;	ArduinoMDNS
+	https://github.com/khoih-prog/TimerInterrupt_Generic.git
+	https://github.com/anklimov/ModbusMaster
+	pazi88/STM32_CAN
+	ericksimoes/Ultrasonic
+
+monitor_speed = 115200
+
+
 ; Run the following command to upload with this environment
 ; pio run -e Upload_ISP -t upload
 [env:Upload_ISP]