platformio.ini monitor baudrate&due bins updated

RC Release notes:
=====
OTA
Universal Modbus (Read only)
Syslog fixes
MCP23017 driver
StatusLED
Moved to upstream Ethernet library for WizNet
Multiply buttons on single analog input
Refactoring LAN StateMachine and many relability improvements

.gitignore

@@ -6,12 +6,16 @@
 .DS_Store
 CMakeListsPrivate.txt
 custom-build-flags/*
-build_flags_due.sh
+custom-build-flags/build_flags_due
-build_flags_esp32.sh
+custom-build-flags/build_flags_esp32
-build_flags_esp8266.sh
+custom-build-flags/build_flags_esp8266
-build_flags_stm32.sh
+custom-build-flags/build_flags_stm32
-build_flags_due-5500.sh
+custom-build-flags/build_flags_due-5500
-build_flags_mega2560.sh
+custom-build-flags/build_flags_mega2560
-build_flags_mega2560-net.sh
+custom-build-flags/build_flags_mega2560-net
-build_flags_controllino.sh
+custom-build-flags/build_flags_controllino
-build_flags_nrf52840.sh
+custom-build-flags/build_flags_nrf52840
+.vscode/*
+.vscode/.browse.c_cpp.db
+.vscode/c_cpp_properties.json
+.vscode/launch.json

.vscode/arduino.json

@@ -1,4 +0,0 @@
-{
-    "board": "arduino:sam:arduino_due_x",
-    "port": "/dev/cu.usbmodem1411"
-}

.vscode/c_cpp_properties.json

@@ -1,108 +0,0 @@
-{
-    "!!! WARNING !!!": "PLEASE DO NOT MODIFY THIS FILE! USE https://docs.platformio.org/page/projectconf/section_env_build.html#build-flags",
-    "configurations": [
-        {
-            "name": "Mac",
-            "macFrameworkPath": [],
-            "includePath": [
-                "/Users/andrey/Library/Arduino15/packages/arduino/tools/**",
-                "/Users/andrey/Library/Arduino15/packages/arduino/hardware/sam/1.6.11/**",
-                "/Users/andrey/.platformio/packages/framework-arduinosam/cores/sam",
-                "/Users/andrey/.platformio/packages/framework-arduinosam/system/sam/libsam",
-                "/Users/andrey/.platformio/packages/framework-arduinosam/system/sam/CMSIS/CMSIS/Include",
-                "/Users/andrey/.platformio/packages/framework-arduinosam/system/sam/CMSIS/Device/ATMEL",
-                "/Users/andrey/.platformio/packages/framework-arduinosam/variants/arduino_due_x",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Adafruit Unified Sensor_ID31",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/ArduinoHttpClient/src",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Artnet",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/CmdArduino",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/DHT sensor library_ID19",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/DS2482_OneWire",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/DallasTemperature",
-                "/Users/andrey/.platformio/packages/framework-arduinosam/libraries/__cores__/sam/Wire/src",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/DmxDue",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/DueFlashStorage/src",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Ethernet2/src",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/FastLED_ID126",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/ModbusMaster/src",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/PrintEx/src",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/PubSubClient/src",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/SD_ID161",
-                "/Users/andrey/.platformio/packages/framework-arduinosam/libraries/__cores__/sam/SPI/src",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/SdFat_ID322/src",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Streaming_ID560",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Syslog/src",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/aJson",
-                "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Ethernet2_ID261/src",
-                "/Users/andrey/.platformio/packages/framework-arduinosam/libraries/__cores__/sam/HID/src",
-                "/Users/andrey/.platformio/packages/tool-unity",
-                "/Users/andrey/Documents/Arduino/lighthub/include",
-                "/Users/andrey/Documents/Arduino/lighthub/lighthub",
-                ""
-            ],
-            "browse": {
-                "limitSymbolsToIncludedHeaders": true,
-                "databaseFilename": "${workspaceRoot}/.vscode/.browse.c_cpp.db",
-                "path": [
-                    "/Users/andrey/.platformio/packages/framework-arduinosam/cores/sam",
-                    "/Users/andrey/.platformio/packages/framework-arduinosam/system/sam/libsam",
-                    "/Users/andrey/.platformio/packages/framework-arduinosam/system/sam/CMSIS/CMSIS/Include",
-                    "/Users/andrey/.platformio/packages/framework-arduinosam/system/sam/CMSIS/Device/ATMEL",
-                    "/Users/andrey/.platformio/packages/framework-arduinosam/variants/arduino_due_x",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Adafruit Unified Sensor_ID31",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/ArduinoHttpClient/src",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Artnet",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/CmdArduino",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/DHT sensor library_ID19",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/DS2482_OneWire",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/DallasTemperature",
-                    "/Users/andrey/.platformio/packages/framework-arduinosam/libraries/__cores__/sam/Wire/src",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/DmxDue",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/DueFlashStorage/src",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Ethernet2/src",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/FastLED_ID126",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/ModbusMaster/src",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/PrintEx/src",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/PubSubClient/src",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/SD_ID161",
-                    "/Users/andrey/.platformio/packages/framework-arduinosam/libraries/__cores__/sam/SPI/src",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/SdFat_ID322/src",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Streaming_ID560",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Syslog/src",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/aJson",
-                    "/Users/andrey/Documents/Arduino/lighthub/.piolibdeps/Ethernet2_ID261/src",
-                    "/Users/andrey/.platformio/packages/framework-arduinosam/libraries/__cores__/sam/HID/src",
-                    "/Users/andrey/.platformio/packages/tool-unity",
-                    "/Users/andrey/Documents/Arduino/lighthub/include",
-                    "/Users/andrey/Documents/Arduino/lighthub/lighthub",
-                    ""
-                ]
-            },
-            "defines": [
-                "PLATFORMIO=40000",
-                "__SAM3X8E__",
-                "ARDUINO_ARCH_SAM",
-                "ARDUINO_SAM_DUE",
-                "Wiz5500",
-                "ARTNET_ENABLE",
-                "F_CPU=84000000L",
-                "USBCON",
-                "ARDUINO=10805",
-                "USB_VID=0x2341",
-                "USB_PID=0x003E",
-                "USB_PRODUCT=\"Arduino Due\"",
-                "USB_MANUFACTURER=\"Arduino\"",
-                "printf=iprintf",
-                ""
-            ],
-            "intelliSenseMode": "clang-x64",
-            "cStandard": "c11",
-            "cppStandard": "c++11",
-            "compilerPath": "/Users/andrey/.platformio/packages/toolchain-gccarmnoneeabi@1.40804.0/bin/arm-none-eabi-gcc -mthumb -mcpu=cortex-m3",
-            "forcedInclude": [
-                "/Users/andrey/Library/Arduino15/packages/arduino/hardware/sam/1.6.11/cores/arduino/Arduino.h"
-            ]
-        }
-    ],
-    "version": 4
-}

.vscode/extensions.json

@@ -1,7 +0,0 @@
-{
-	// See http://go.microsoft.com/fwlink/?LinkId=827846
-	// for the documentation about the extensions.json format
-	"recommendations": [
-		"platformio.platformio-ide"
-	]
-}

.vscode/launch.json

@@ -1,34 +0,0 @@
-// AUTOMATICALLY GENERATED FILE. PLEASE DO NOT MODIFY IT MANUALLY
-
-// PIO Unified Debugger
-//
-// Documentation: https://docs.platformio.org/page/plus/debugging.html
-// Configuration: https://docs.platformio.org/page/projectconf/section_env_debug.html
-
-{
-    "version": "0.2.0",
-    "configurations": [
-        {
-            "type": "platformio-debug",
-            "request": "launch",
-            "name": "PIO Debug",
-            "executable": "/Users/andrey/Documents/Arduino/lighthub/.pioenvs/due-5500/firmware.elf",
-            "toolchainBinDir": "/Users/andrey/.platformio/packages/toolchain-gccarmnoneeabi@1.40804.0/bin",
-            "svdPath": "/Users/andrey/.platformio/platforms/atmelsam/misc/svd/ATSAM3X8E.svd",
-            "preLaunchTask": {
-                "type": "PlatformIO",
-                "task": "Pre-Debug"
-            },
-            "internalConsoleOptions": "openOnSessionStart"
-        },
-        {
-            "type": "platformio-debug",
-            "request": "launch",
-            "name": "PIO Debug (skip Pre-Debug)",
-            "executable": "/Users/andrey/Documents/Arduino/lighthub/.pioenvs/due-5500/firmware.elf",
-            "toolchainBinDir": "/Users/andrey/.platformio/packages/toolchain-gccarmnoneeabi@1.40804.0/bin",
-            "svdPath": "/Users/andrey/.platformio/platforms/atmelsam/misc/svd/ATSAM3X8E.svd",
-            "internalConsoleOptions": "openOnSessionStart"
-        }
-    ]
-}

.vscode/settings.json

@@ -1,6 +0,0 @@
-{
-    "terminal.integrated.env.osx": {
-        "PATH": "/Users/andrey/.platformio/penv/bin:/Users/andrey/.platformio/penv:/usr/local/opt/ruby/bin:/usr/local/opt/python@2/bin:/opt/local/sbin:/usr/local/Cellar/python@2/2.7.15_1/Frameworks/Python.framework/Versions/2.7/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/Applications/Wireshark.app/Contents/MacOS",
-        "PLATFORMIO_CALLER": "vscode"
-    }
-}

build-flags/build_flags_controllino

@@ -0,0 +1,3 @@
+-DCONTROLLINO
+-DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:07
+-DWiz5100

build-flags/build_flags_due

@@ -0,0 +1,7 @@
+#-DW5500_CS_PIN=53
+-DDMX_SMOOTH
+-DSYSLOG_ENABLE
+-DMODBUS_DIMMER_PARAM=SERIAL_8E1
+-DARTNET_ENABLE
+-DOTA
+-DSTATUSLED

build-flags/build_flags_due-5100

@@ -0,0 +1,5 @@
+-DARTNET_ENABLE
+-DDMX_SMOOTH
+-DSTATUSLED
+-DSYSLOG_ENABLE
+-DWiz5100

build-flags/build_flags_due-5500

@@ -0,0 +1,5 @@
+-DWiz5500
+-DARTNET_ENABLE
+-DDMX_SMOOTH
+-DSTATUSLED
+-DSYSLOG_ENABLE

build-flags/build_flags_esp32-wifi

@@ -0,0 +1,15 @@
+-DWIFI_ENABLE
+-DDMX_DISABLE
+# - exeption in DMX.update/begin
+#-DSPILED_DISABLE
+#-DAC_DISABLE
+-DMODBUS_DISABLE
+#-DMBUS_DISABLE
+-DCOUNTER_DISABLE
+#-DSYSLOG_ENABLE - udp errors
+-DOTA
+-DMCP23017
+-DMODBUS_TX_PIN=13
+#-DARTNET_ENABLE - udp rx errors ((
+#-DUSE_1W_PIN=16
+#-DW5500_CS_PIN=15

build-flags/build_flags_esp8266-wifi

@@ -0,0 +1,9 @@
+-DWIFI_ENABLE
+-DMODBUS_DISABLE
+-DOTA
+-std=gnu++11
+-DSYSLOG_ENABLE
+-DMCP23017
+-DARTNET_ENABLE
+-DUSE_1W_PIN=16
+-DW5500_CS_PIN=15

build-flags/build_flags_lighthub21

@@ -0,0 +1,10 @@
+-DW5500_CS_PIN=53
+-DARTNET_ENABLE
+-DDMX_SMOOTH
+-DMODBUS_DIMMER_PARAM=SERIAL_8E1
+-DMODBUS_SERIAL_BAUD=9600
+-DOTA
+-DSYSLOG_ENABLE
+#-DWiz5500
+-DSTATUSLED
+-DMCP23017

build-flags/build_flags_m5stack

@@ -0,0 +1,11 @@
+-DWIFI_ENABLE
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+-DOWIRE_DISABLE
+-DDHT_DISABLE
+-DCOUNTER_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE
+-DM5STACK
+#-DSYSLOG_ENABLE
+-DUSE_1W_PIN=16

build-flags/build_flags_mega2560-5100

@@ -0,0 +1,4 @@
+-DMODBUS_DIMMER_PARAM=SERIAL_8E1
+-DAVR_DMXOUT_PIN=18
+-DSYSLOG_ENABLE
+-DWiz5100

build-flags/build_flags_mega2560-5500

@@ -0,0 +1,4 @@
+-DWiz5500
+-DMODBUS_DIMMER_PARAM=SERIAL_8E1
+-DAVR_DMXOUT_PIN=18
+-DSYSLOG_ENABLE

build-flags/build_flags_mega2560slim-5100

@@ -0,0 +1,14 @@
+
+#-DMODBUS_DIMMER_PARAM=SERIAL_8E1
+#-DAVR_DMXOUT_PIN=18
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+#-DMBUS_DISABLE
+#-DOWIRE_DISABLE
+-DDHT_DISABLE
+-DCOUNTER_DISABLE
+-DNO_HOMIE
+-DCSSHDC_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE
+-DSYSLOG_ENABLE

build-flags/build_flags_nrf52840-5500

@@ -0,0 +1,13 @@
+-DWiz5500
+#-DW5500_CS_PIN=10
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+#-DOWIRE_DISABLE
+-std=gnu++11
+-DWIFI_MANAGER_DISABLE
+-DCOUNTER_DISABLE
+-DCSSHDC_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE
+-DSYSLOG_ENABLE
+-DMBUS_DISABLE

build-flags/build_flags_stm32-enc2860

@@ -0,0 +1,10 @@
+-DDMX_DISABLE
+-DMODBUS_DISABLE
+-DMBUS_DISABLE
+-DOWIRE_DISABLE
+-DDHT_DISABLE
+-DCOUNTER_DISABLE
+-DNO_HOMIE
+-DCSSHDC_DISABLE
+-DSPILED_DISABLE
+-DAC_DISABLE

build-flags/build_flags_template

@@ -0,0 +1,33 @@
+
+# usage:
+# first make your own copy of template
+# cp build_flags_template build_flags_ENVNAME
+# then edit, change or comment something
+# place to custom-build-flags dir if you would like have your own private settings
+# -DMY_CONFIG_SERVER=lazyhome.ru
+# -DWATCH_DOG_TICKER_DISABLE
+# -DUSE_1W_PIN=12
+# -DSD_CARD_INSERTED
+# -DSERIAL_BAUD=115200
+# -DWiz5500
+# -DDISABLE_FREERAM_PRINT
+# -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:ff
+# -DDMX_DISABLE
+# -DMODBUS_DISABLE
+# -DOWIRE_DISABLE
+# -DAVR_DMXOUT_PIN=18
+# -DLAN_INIT_DELAY=2000
+# -DCONTROLLINO
+# -DESP_WIFI_AP=MYAP
+# -DESP_WIFI_PWD=MYPWD
+# -DWIFI_MANAGER_DISABLE
+# -DRESET_PIN=5
+# -DDHCP_RETRY_INTERVAL=60000
+# -DRESTART_LAN_ON_MQTT_ERRORS
+# -DW5500_CS_PIN=53
+# -DSYSLOG_ENABLE
+# -DDEVICE_NAME=MYDEVICE
+# -DDHT_DISABLE
+# -DCOUNTER_DISABLE
+# -DWITH_PRINTEX_LIB
+# -DCSSHDC_DISABLE

build_flags_mega2560-net.sh

@@ -1,30 +0,0 @@
-#! /bin/bash
-# usage:
-# first make your own copy of template
-# cp build_flags_template.sh build_flags_ENVNAME.sh
-# then edit, change or comment something
- export FLAGS="-DMY_CONFIG_SERVER=lazyhome.ru"
- #export FLAGS="$FLAGS -DWATCH_DOG_TICKER_DISABLE"
- #export FLAGS="$FLAGS -DUSE_1W_PIN=12"
- #export FLAGS="$FLAGS -DSD_CARD_INSERTED"
- export FLAGS="$FLAGS -DSERIAL_BAUD=115200"
- #export FLAGS="$FLAGS -DWiz5500"
- #export FLAGS="$FLAGS -DDISABLE_FREERAM_PRINT"
- export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:fe"
-# export FLAGS="$FLAGS -DDMX_DISABLE"
-# export FLAGS="$FLAGS -DARTNET_ENABLE"
-# export FLAGS="$FLAGS -DMODBUS_DISABLE"
-# export FLAGS="$FLAGS -DOWIRE_DISABLE"
-# export FLAGS="$FLAGS -DAVR_DMXOUT_PIN=18"
-# export FLAGS="$FLAGS -DLAN_INIT_DELAY=2000"
-# export FLAGS="$FLAGS -DCONTROLLINO"
-# export FLAGS="$FLAGS -DESP_WIFI_AP=MYAP"
-# export FLAGS="$FLAGS -DESP_WIFI_PWD=MYPWD"
-# export FLAGS="$FLAGS -DWIFI_MANAGER_DISABLE"
- export FLAGS="$FLAGS -DDHT_DISABLE"
-# export FLAGS="$FLAGS -DRESET_PIN=5"
-# export FLAGS="$FLAGS -DDHCP_RETRY_INTERVAL=60000"
-# export FLAGS="$FLAGS -DRESTART_LAN_ON_MQTT_ERRORS"
-# export FLAGS="$FLAGS -DW5500_CS_PIN=53"
- export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
- echo $FLAGS

check_custom_build_flags_controllino.sh

@@ -1,9 +0,0 @@
-#! /bin/bash
-export FLAGS="$FLAGS -DCONTROLLINO"
-export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:07"
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_controllino.sh
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

check_custom_build_flags_due-5500.sh

@@ -1,9 +0,0 @@
-#! /bin/bash
-export FLAGS="$FLAGS -DWiz5500"
-export FLAGS="$FLAGS -DARTNET_ENABLE"
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_due-5500.sh
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

check_custom_build_flags_due.sh

@@ -1,7 +0,0 @@
-#! /bin/bash
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_due.sh
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

check_custom_build_flags_esp32.sh

@@ -1,14 +0,0 @@
-#! /bin/bash
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-export FLAGS="$FLAGS -DDMX_DISABLE"
-export FLAGS="$FLAGS -DMODBUS_DISABLE"
-export FLAGS="$FLAGS -DOWIRE_DISABLE"
-export FLAGS="$FLAGS -DDHT_DISABLE"
-export FLAGS="$FLAGS -DCOUNTER_DISABLE"
-#export FLAGS="$FLAGS -DM5STACK"
-#export FLAGS="$FLAGS -std=gnu++11"
-CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_esp32.sh
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

check_custom_build_flags_esp8266.sh

@@ -1,9 +0,0 @@
-#! /bin/bash
-export FLAGS="$FLAGS -DMODBUS_DISABLE"
-#export FLAGS="$FLAGS -DCOUNTER_DISABLE"
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_esp8266.sh
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

check_custom_build_flags_lighthub21.sh

@@ -1,10 +0,0 @@
-#! /bin/bash
-export FLAGS="$FLAGS -DWiz5500"
-export FLAGS="$FLAGS -DW5500_CS_PIN=53"
-export FLAGS="$FLAGS -DARTNET_ENABLE"
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_due-5500.sh
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

check_custom_build_flags_mega2560-5500.sh

@@ -1,9 +0,0 @@
-#! /bin/bash
-CUSTOM_BUILD_FLAGS_FILE="custom-build-flags/build_flags_mega2560.sh"
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-export FLAGS="$FLAGS -DWiz5500"
-#TODO: make one file for all envs
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

check_custom_build_flags_mega2560-slim.sh

@@ -1,8 +0,0 @@
-#! /bin/bash
-CUSTOM_BUILD_FLAGS_FILE="custom-build-flags/build_flags_mega2560-slim.sh"
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-#TODO: make one file for all envs
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

check_custom_build_flags_mega2560.sh

@@ -1,7 +0,0 @@
-#! /bin/bash
-CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_mega2560.sh
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

check_custom_build_flags_nrf52840.sh

@@ -1,17 +0,0 @@
-#! /bin/bash
-export FLAGS="$FLAGS -DWiz5500"
-#export FLAGS="$FLAGS -DW5500_CS_PIN=10"
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-export FLAGS="$FLAGS -DDMX_DISABLE"
-export FLAGS="$FLAGS -DMODBUS_DISABLE"
-#export FLAGS="$FLAGS -DOWIRE_DISABLE"
-export FLAGS="$FLAGS -std=gnu++11"
-export FLAGS="$FLAGS -DWIFI_MANAGER_DISABLE"
-export FLAGS="$FLAGS -DCOUNTER_DISABLE"
-export FLAGS="$FLAGS -DCSSHDC_DISABLE"
-
-CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_nrf52840.sh
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

check_custom_build_flags_stm32.sh

@@ -1,14 +0,0 @@
-#! /bin/bash
-CUSTOM_BUILD_FLAGS_FILE=custom-build-flags/build_flags_stm32.sh
-export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-export FLAGS="$FLAGS -DDMX_DISABLE"
-export FLAGS="$FLAGS -DMODBUS_DISABLE"
-export FLAGS="$FLAGS -DOWIRE_DISABLE"
-export FLAGS="$FLAGS -DDHT_DISABLE"
-export FLAGS="$FLAGS -DCOUNTER_DISABLE"
-export FLAGS="$FLAGS -DNO_HOMIE"
-export FLAGS="$FLAGS -DCSSHDC_DISABLE"
-if [ -f $CUSTOM_BUILD_FLAGS_FILE ]; then
-    source $CUSTOM_BUILD_FLAGS_FILE
-fi
- echo $FLAGS

compiled/DUE_16u2_reflash/16u2-original.hex

@@ -0,0 +1,137 @@
+:20000000A7C00000C0C00000BEC00000BCC00000BAC00000B8C00000B6C00000B4C0000023
+:20002000B2C00000B0C00000AEC00000CBC400008FC40000A8C00000A6C00000A4C000005C
+:20004000A2C00000A0C000009EC000009CC000009AC0000098C0000096C0000021C100003A
+:2000600092C0000090C000008EC000008CC000008AC0000088C0000086C0000084C0000028
+:2000800082C0000080C000007EC000007CC000007AC0000078C000001201100102000008C4
+:2000A00041233D0001000102DC0109023E00020100C0320904000001020201000524000143
+:2000C00010042402060524060001070582030800FF09040100020A000000070504024000AC
+:2000E0000107058302400001040309043203410072006400750069006E006F0020002800CA
+:200100007700770077002E00610072006400750069006E006F002E0063006300290000003D
+:200120002E03410072006400750069006E006F0020004400750065002000500072006F002D
+:2001400067002E00200050006F0072007400000011241FBECFEFD2E0DEBFCDBF11E0A0E029
+:20016000B1E0E8EEF0E102C005900D92A831B107D9F712E0A8E1B1E001C01D92A833B107E1
+:20018000E1F722D1AFC73CCF9C01DC01AE57BF4FED91FC91119741911196FC93EE93805872
+:2001A0009F4FE817F90711F42D933C939FB7F894F901EC57FF4F8081815080839FBF842F6B
+:2001C0000895882311F03F9A01C03F9847980895882311F046980895469A0895DF92EF9253
+:2001E000FF920F931F93FC018489813019F0823019F404C010E303C010E001C010E283896E
+:20020000823009F418608589873031F0883031F0863029F4126003C0146001C016601092A3
+:20022000C9001092C8001092CA000785F088E188D288202F3F2D4E2D5D2D10921E01203B7C
+:2002400084E0380780E0480780E0580719F481E080931E01CA01B90122E030E040E050E006
+:2002600026D720583B47414E5F4FCA01B901202F3F2D4E2D5D2DF9D6215030403093CD00C5
+:200280002093CC001093CA0082E08093C80088E98093C9001F910F91FF90EF90DF9008957E
+:2002A0001F920F920FB60F9211242F938F939F93EF93FF939091CE008EB38430F1F4E091ED
+:2002C000A201F091A3019083E091A201F091A301CF0101969093A3018093A201825A914079
+:2002E00021F482E291E0928381839FB7F8948091A6018F5F8093A6019FBFFF91EF919F911B
+:200300008F912F910F900FBE0F901F901895FC0140911A0140931B0180911C0180931D015F
+:200320008585282F30E02170307020931A01858590E096958795817080931C0180911E013B
+:20034000882339F08FE590E090931901809318010895442341F4222331F08EE190E09093DB
+:20036000190180931801089580E091E014C680E091E0C7C51F9384B7877F84BF18E10FB69E
+:20038000F89410936000109260000FBE80E019DF469A3E9A87E690E09093CD008093CC0043
+:2003A00086E08093CA001092C8001093C900539A5A9A8AB180638AB98BB180638BB9BDD2F0
+:2003C00084E085BD1F9108950F931F93CF93DF93D1DF2FB7F89487EA91E09093280280939E
+:2003E000270290932A02809329022FBF2FB7F89482E291E09093A3018093A2019093A501CC
+:200400008093A4012FBF7894C7EAD1E003E08FB7F89490912B028FBF903809F180E091E0E4
+:20042000E6D497FD1CC0E0912702F09128028083E0912702F0912802CF0101969093280251
+:20044000809327028752924011F4D283C1839FB7F89480912B028F5F80932B029FBF8FB725
+:20046000F8941091A6018FBFA89903C0113608F469C0A89A8091A601882361F05D9800936C
+:200480001F0108C082E291E07FDE682F80E091E014D511501123B1F780911F01882351F097
+:2004A00080911F01815080931F0180911F01882309F45D9A80912001882351F080912001E7
+:2004C00081508093200180912001882309F45C9A8091180190911901181619067CF58F3560
+:2004E000910521F481E074DE80E06BDE8091180190911901839721F480E06ADE80E061DE1A
+:200500008091180190911901499721F480E060DE81E057DE8091180190911901019721F43B
+:2005200080E056DE80E04DDE80911801909119010197909319018093180104C080E048DEEC
+:2005400080E03FDE8FB7F89490912B028FBF992369F087EA91E018DE982F8091C80085FF9F
+:20056000FCCF9093CE005C980093200180E091E095D42AD44CCFDA01923049F0933061F0DA
+:200580009130F9F4E8E9F0E022E130E01EC0EAEAF0E02EE330E019C0813049F0813018F0DA
+:2005A000823079F408C0E8EEF0E0849107C0ECEEF0E0849103C0E0E2F1E08491282F30E041
+:2005C00004C0E0E0F0E020E030E0ED93FC93C901089528E030E040E003C04F5F220F331F15
+:2005E00028173907D0F3842F8295807F08958093E9008091EB0081608093EB001092ED00ED
+:200600006093EC004093ED008091EE00881F8827881F08951092F40090E09093E9001092EE
+:20062000F0001092E8001092ED008091EB008E7F8093EB009F5F953081F70895809130028F
+:2006400088238CF403C08EB38823B1F08091E80082FFF9CF8091E8008B778093E80008954A
+:200660008EB3882349F08091E80080FFF9CF8091E8008E778093E800089594E68091EC0008
+:2006800080FF05C08091E80080FF05C023C08091E80082FD1FC08EB3882311F482E00895AF
+:2006A0008EB3853011F483E008958091EB0085FF02C081E008958091E10082FFDFCF8091CD
+:2006C000E1008B7F8093E100992311F484E008959150D4CF80E008959C0140913602509171
+:2006E00037024617570718F4F90120E038C06115710511F0AB01F8CF8091E8008E77809397
+:20070000E80040E050E0F0CF8091E80083FF02C081E008958091E80082FD2DC08EB3882356
+:2007200081F18EB3853079F18091E80080FF17C09091F20006C081918093F1004150504088
+:200740009F5F4115510511F09830A8F320E0983009F421E08091E8008E778093E800411576
+:20076000510591F6222381F606C08EB3882349F08EB3853041F08091E80082FFF6CF80E02F
+:20078000089582E0089583E008959C0140913602509137024617570710F490E03BC061155D
+:2007A000710511F0AB01F9CF8091E8008E778093E80040E050E0F1CF8091E80083FF02C008
+:2007C00081E008958091E80082FD30C08EB3882399F18EB3853091F18091E80080FF1AC073
+:2007E0008091F20009C0F9012F5F3F4FE491E093F100415050408F5F4115510511F08830CA
+:2008000090F390E0883009F491E08091E8008E778093E8004115510579F6992369F606C0CA
+:200820008EB3882349F08EB3853041F08091E80082FFF6CF80E0089582E0089583E0089531
+:200840009C016115710529F48091E8008B778093E800F90120C08091E80083FF02C081E084
+:2008600008958EB3882339F18EB3853031F18091E80082FFF0CF06C08091F10081936150E7
+:20088000704021F08091F2008823B1F78091E8008B778093E80061157105E9F606C08EB379
+:2008A000882349F08EB3853041F08091E80080FFF6CF80E0089582E0089583E0089542D0E2
+:2008C00044D01EBA10922E0210922D0210922C0284E089BD89B5826089BD09B400FEFDCF22
+:2008E0008091D800982F9F779093D80080688093D800809163008E7F809363008091D80084
+:200900008F7D8093D8008091E0008E7F8093E0008091E1008E7F8093E1008091E200816028
+:200920008093E2008091E100877F8093E1008091E20088608093E2000895C1DF81E0809355
+:200940002F0208951092E20008951092E10008951F920F920FB60F9211241F932F933F9355
+:200960004F935F936F937F938F939F93AF93BF93EF93FF93E9EEF0E0108117701082E0EF73
+:20098000F0E08081877F80837894C3D0F894A9EEB0E01C92E0EFF0E08081886080831C9343
+:2009A000FF91EF91BF91AF919F918F917F916F915F914F913F912F911F910F900FBE0F901C
+:2009C0001F9018951F920F920FB60F9211242F933F934F935F936F937F938F939F93AF93BC
+:2009E000BF93EF93FF938091E10080FF1BC08091E20080FF17C08091E1008E7F8093E10009
+:200A00008091E2008E7F8093E2008091E20080618093E2008091D80080628093D80019BC8D
+:200A20001EBAD1D18091E10084FF29C08091E20084FF25C084E089BD89B5826089BD09B4B6
+:200A400000FEFDCF8091D8008F7D8093D8008091E1008F7E8093E1008091E2008F7E8093E6
+:200A6000E2008091E20081608093E20080912E02882311F481E001C084E08EBBA4D1809185
+:200A8000E10083FF27C08091E20083FF23C08091E100877F8093E10082E08EBB10922E024B
+:200AA0008091E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E200AADDFE
+:200AC00080E060E042E093DD8091F00088608093F00079D18091E10082FF0AC08091E2007E
+:200AE00082FF06C08091E1008B7F8093E1006BD1FF91EF91BF91AF919F918F917F916F9183
+:200B00005F914F913F912F910F900FBE0F901F9018951F93DF93CF93CDB7DEB7AC970FB667
+:200B2000F894DEBF0FBECDBFE0E3F2E08091F100819322E0E833F207C9F7809130023091AE
+:200B40003102353009F487C0363040F43130C9F1313070F0333009F01DC133C0383009F4B1
+:200B6000EFC0393009F4FEC0363009F013C192C0803821F0823809F00DC108C090912C02BC
+:200B800080912D02882399F0926011C08091340287708093E9008091EB0090E025E0969548
+:200BA00087952A95E1F7982F91701092E9008091E800877F8093E8009093F1001092F1008E
+:200BC000CAC0882319F0823009F0E4C090E08F719070009721F0029709F0DDC00CC0809164
+:200BE0003202813009F0D7C010922D02333069F580932D022AC080913202882331F52091FB
+:200C00003402277009F4C7C02093E9008091EB0080FFC1C0333021F48091EB00806213C0C2
+:200C20008091EB0080618093EB0081E090E002C0880F991F2A95E2F78093EA001092EA00D6
+:200C40008091EB0088608093EB001092E9008091E800877F83C0882309F09CC01091320210
+:200C60008091E800877F8093E800E8DC04C08EB3882309F490C08091E80080FFF8CF812FCA
+:200C80008F7711F492E001C093E09EBB80688093E30081C08058823008F07CC08091320228
+:200CA0009091330223E08C3D920799F55FB7F894DE0115964EE020E030E061E2E42FF0E05B
+:200CC00060935700849120FF03C082958F704F5F982F9F70892F805D8A3308F0895F8C93E8
+:200CE00011961C9211972F5F3F4F12962431310529F75FBF8AE28B8383E08C838091E80085
+:200D0000877F8093E800CE0103966AE270E0E4DC11C060913402AE014F5F5F4F2CDCBC0146
+:200D20000097C9F18091E800877F8093E80089819A812BDD8091E8008B778093E8002BC05A
+:200D4000803841F58091E800877F8093E80080912E028093F1008091E8008E778093E8006D
+:200D60006DDC19C08823B1F490913202923098F48091E800877F8093E80090932E025EDCD7
+:200D800080912E02882311F483E001C084E08EBBEEDA01C0E9DA8091E80083FF0AC08091EF
+:200DA000EB0080628093EB008091E800877F8093E800AC960FB6F894DEBF0FBECDBFCF9185
+:200DC000DF911F91089508951F938EB3882361F01091E9001092E9008091E80083FF01C079
+:200DE00098DE17701093E9001F9108950895FC018EB3843021F587859089A189B289009757
+:200E0000A105B105E1F085818093E9008091E80082FF15C08091F200882319F42FEF3FEF4D
+:200E200004C08091F100282F30E08091F200882341F48091E8008B778093E80002C02FEFCC
+:200E40003FEFC9010895FC018EB3843011F587859089A189B2890097A105B105D1F08181C5
+:200E60008093E9008091F2008823A9F09091E8008091E8008E778093E80095FD0CC0FDDBF7
+:200E8000982F882349F48091E8008E778093E80003C092E001C090E0892F0895FC018EB3B1
+:200EA000843051F487859089A189B2890097A105B10511F0CF01C7CF08951F93FC01162FC4
+:200EC0008EB38430D9F487859089A189B2890097A105B10599F081818093E9008091E80053
+:200EE00085FD08C08091E8008E778093E800C5DB882329F41093F10080E001C082E01F9180
+:200F000008950F931F93CF93DF93EC010D96FC0189E0DF011D928A95E9F72A813B81098197
+:200F20008C81882311F410E001C014E0C90151DB182B1260802F61E8412F59DB882329F143
+:200F40002E813F810D818885882311F410E001C014E0C9013EDB182B1260802F60E8412F33
+:200F600046DB882391F02A853B8509858C85882311F410E001C014E0C9012BDB182B12603C
+:200F8000802F61EC412F33DB01C080E0DF91CF911F910F910895CF93DF93EC018091E8003F
+:200FA00083FF60C0888190E020913402309135022817390709F056C080913102813261F061
+:200FC000823220F4803209F04DC019C0823269F1833209F047C038C080913002813A09F006
+:200FE00041C08091E800877F8093E800CE010F9667E070E071DB8091E8008B7713C08091C0
+:201000003002813279F58091E800877F8093E800CE010F9667E070E013DCCE01DFD88091F2
+:20102000E8008E778093E8001DC0809130028132C9F48091E800877F8093E80080913202F9
+:201040008D87CE0164D90DC080913002813251F48091E800877F8093E800CE01609132027A
+:20106000C5DEECDADF91CF910895A1E21A2EAA1BBB1BFD010DC0AA1FBB1FEE1FFF1FA217E2
+:20108000B307E407F50720F0A21BB30BE40BF50B661F771F881F991F1A9469F760957095B3
+:2010A000809590959B01AC01BD01CF01089597FB092E05260ED057FD04D0D7DF0AD0001CDC
+:2010C00038F450954095309521953F4F4F4F5F4F0895F6F790958095709561957F4F8F4F6A
+:2010E0009F4F0895F894FFCF00034000000440000002080000000000000000000000140066
+:00000001FF

compiled/DUE_16u2_reflash/16u2-out.hex

@@ -0,0 +1,137 @@
+:20000000A7C00000C0C00000BEC00000BCC00000BAC00000B8C00000B6C00000B4C0000023
+:20002000B2C00000B0C00000AEC00000C1C4000085C40000A8C00000A6C00000A4C0000070
+:20004000A2C00000A0C000009EC000009CC000009AC0000098C0000096C0000021C100003A
+:2000600092C0000090C000008EC000008CC000008AC0000088C0000086C0000084C0000028
+:2000800082C0000080C000007EC000007CC000007AC0000078C000001201100102000008C4
+:2000A00041233D0001000102DC0109023E00020100C0320904000001020201000524000143
+:2000C00010042402060524060001070582030800FF09040100020A000000070504024000AC
+:2000E0000107058302400001040309043203410072006400750069006E006F0020002800CA
+:200100007700770077002E00610072006400750069006E006F002E0063006300290000003D
+:200120002E03410072006400750069006E006F0020004400750065002000500072006F002D
+:2001400067002E00200050006F0072007400000011241FBECFEFD2E0DEBFCDBF11E0A0E029
+:20016000B1E0E4EDF0E102C005900D92A831B107D9F712E0A8E1B1E001C01D92A833B107E6
+:20018000E1F72BD1A5C73CCF9C01DC01AE57BF4FED91FC91119741911196FC93EE93805873
+:2001A0009F4FE817F90711F42D933C939FB7F894F901EC57FF4F8081815080839FBF842F6B
+:2001C0000895882311F03F9A01C03F9847980895882311F046980895469A0895DF92EF9253
+:2001E000FF920F931F93FC018489813019F0823019F404C010E303C010E001C010E283896E
+:20020000823009F418608589873031F0883031F0863029F4126003C0146001C016601092A3
+:20022000C9001092C8001092CA000785F088E188D288202F3F2D4E2D5D2D10921E01203B7C
+:2002400084E0380780E0480780E0580719F481E080931E01CA01B90122E030E040E050E006
+:200260001CD720583B47414E5F4FCA01B901202F3F2D4E2D5D2DEFD6215030403093CD00D9
+:200280002093CC001093CA0082E08093C80088E98093C9001F910F91FF90EF90DF9008957E
+:2002A0001F920F920FB60F9211242F938F939F93EF93FF939091CE008EB38430F1F4E091ED
+:2002C000A201F091A3019083E091A201F091A301CF0101969093A3018093A201825A914079
+:2002E00021F482E291E0928381839FB7F8948091A6018F5F8093A6019FBFFF91EF919F911B
+:200300008F912F910F900FBE0F901F901895FC0140911A0140931B0180911C0180931D015F
+:200320008585282F30E02170307020931A01858590E096958795817080931C0180911E013B
+:20034000882339F088E790E090931901809318010895442341F4222331F082E390E09093EA
+:20036000190180931801089580E091E00AC680E091E0BDC584B7877F84BF88E10FB6F89468
+:2003800080936000109260000FBE81E01ADF16BC83E085BD86B58831E8F315BC16BC80E078
+:2003A00010DF469A3E9A87E690E09093CD008093CC0086E08093CA001092C80088E18093C1
+:2003C000C900539A5A9A8AB180638AB98BB180638BB9A9D284E085BD08950F931F93CF933B
+:2003E000DF93C8DF2FB7F89487EA91E0909328028093270290932A02809329022FBF2FB7A6
+:20040000F89482E291E09093A3018093A2019093A5018093A4012FBF7894C7EAD1E003E03E
+:200420008FB7F89490912B028FBF903809F180E091E0D3D497FD1CC0E0912702F09128025F
+:200440008083E0912702F0912802CF01019690932802809327028752924011F4D283C1831B
+:200460009FB7F89480912B028F5F80932B029FBF8FB7F8941091A6018FBFA89903C011361D
+:2004800008F456C0A89A8091A601882361F05D9800931F0108C082E291E076DE682F80E0C4
+:2004A00091E001D511501123B1F780911F01882351F080911F01815080931F0180911F0135
+:2004C000882309F45D9A80912001882351F08091200181508093200180912001882309F44E
+:2004E0005C9A809118019091190118161906E4F4CC97CD9710F481E001C080E069DE8091D7
+:200500001801909119010197C29710F481E001C080E057DE809118019091190101979093BB
+:2005200019018093180104C080E052DE80E049DE8FB7F89490912B028FBF992369F087EAA6
+:2005400091E022DE982F8091C80085FFFCCF9093CE005C980093200180E091E095D42AD46A
+:200560005FCFDA01923049F0933061F09130F9F4E8E9F0E022E130E01EC0EAEAF0E02EE36E
+:2005800030E019C0813049F0813018F0823079F408C0E8EEF0E0849107C0ECEEF0E08491A7
+:2005A00003C0E0E2F1E08491282F30E004C0E0E0F0E020E030E0ED93FC93C901089528E087
+:2005C00030E040E003C04F5F220F331F28173907D0F3842F8295807F08958093E900809142
+:2005E000EB0081608093EB001092ED006093EC004093ED008091EE00881F8827881F08956A
+:200600001092F40090E09093E9001092F0001092E8001092ED008091EB008E7F8093EB0016
+:200620009F5F953081F708958091300288238CF403C08EB38823B1F08091E80082FFF9CFE2
+:200640008091E8008B778093E80008958EB3882349F08091E80080FFF9CF8091E8008E77A4
+:200660008093E800089594E68091EC0080FF05C08091E80080FF05C023C08091E80082FD8F
+:200680001FC08EB3882311F482E008958EB3853011F483E008958091EB0085FF02C081E0ED
+:2006A00008958091E10082FFDFCF8091E1008B7F8093E100992311F484E008959150D4CF46
+:2006C00080E008959C0140913602509137024617570718F4F90120E038C06115710511F0B7
+:2006E000AB01F8CF8091E8008E778093E80040E050E0F0CF8091E80083FF02C081E0089544
+:200700008091E80082FD2DC08EB3882381F18EB3853079F18091E80080FF17C09091F20054
+:2007200006C081918093F100415050409F5F4115510511F09830A8F320E0983009F421E0E8
+:200740008091E8008E778093E8004115510591F6222381F606C08EB3882349F08EB38530D0
+:2007600041F08091E80082FFF6CF80E0089582E0089583E008959C0140913602509137024D
+:200780004617570710F490E03BC06115710511F0AB01F9CF8091E8008E778093E80040E0B5
+:2007A00050E0F1CF8091E80083FF02C081E008958091E80082FD30C08EB3882399F18EB3EF
+:2007C000853091F18091E80080FF1AC08091F20009C0F9012F5F3F4FE491E093F100415044
+:2007E00050408F5F4115510511F0883090F390E0883009F491E08091E8008E778093E80004
+:200800004115510579F6992369F606C08EB3882349F08EB3853041F08091E80082FFF6CF51
+:2008200080E0089582E0089583E008959C016115710529F48091E8008B778093E800F90126
+:2008400020C08091E80083FF02C081E008958EB3882339F18EB3853031F18091E80082FFD5
+:20086000F0CF06C08091F10081936150704021F08091F2008823B1F78091E8008B77809307
+:20088000E80061157105E9F606C08EB3882349F08EB3853041F08091E80080FFF6CF80E0F6
+:2008A000089582E0089583E0089542D044D01EBA10922E0210922D0210922C0284E089BD81
+:2008C00089B5826089BD09B400FEFDCF8091D800982F9F779093D80080688093D800809186
+:2008E00063008E7F809363008091D8008F7D8093D8008091E0008E7F8093E0008091E1004F
+:200900008E7F8093E1008091E20081608093E2008091E100877F8093E1008091E200886046
+:200920008093E2000895C1DF81E080932F0208951092E20008951092E10008951F920F92B0
+:200940000FB60F9211241F932F933F934F935F936F937F938F939F93AF93BF93EF93FF93D2
+:20096000E9EEF0E0108117701082E0EFF0E08081877F80837894C3D0F894A9EEB0E01C927D
+:20098000E0EFF0E08081886080831C93FF91EF91BF91AF919F918F917F916F915F914F914D
+:2009A0003F912F911F910F900FBE0F901F9018951F920F920FB60F9211242F933F934F932D
+:2009C0005F936F937F938F939F93AF93BF93EF93FF938091E10080FF1BC08091E20080FF57
+:2009E00017C08091E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E2006F
+:200A00008091D80080628093D80019BC1EBAD1D18091E10084FF29C08091E20084FF25C018
+:200A200084E089BD89B5826089BD09B400FEFDCF8091D8008F7D8093D8008091E1008F7E40
+:200A40008093E1008091E2008F7E8093E2008091E20081608093E20080912E02882311F4F3
+:200A600081E001C084E08EBBA4D18091E10083FF27C08091E20083FF23C08091E100877F87
+:200A80008093E10082E08EBB10922E028091E1008E7F8093E1008091E2008E7F8093E200FD
+:200AA0008091E20080618093E200AADD80E060E042E093DD8091F00088608093F00079D17E
+:200AC0008091E10082FF0AC08091E20082FF06C08091E1008B7F8093E1006BD1FF91EF9163
+:200AE000BF91AF919F918F917F916F915F914F913F912F910F900FBE0F901F9018951F938D
+:200B0000DF93CF93CDB7DEB7AC970FB6F894DEBF0FBECDBFE0E3F2E08091F100819322E0B1
+:200B2000E833F207C9F78091300230913102353009F487C0363040F43130C9F1313070F08B
+:200B4000333009F01DC133C0383009F4EFC0393009F4FEC0363009F013C192C0803821F0E2
+:200B6000823809F00DC108C090912C0280912D02882399F0926011C0809134028770809355
+:200B8000E9008091EB0090E025E0969587952A95E1F7982F91701092E9008091E800877FCB
+:200BA0008093E8009093F1001092F100CAC0882319F0823009F0E4C090E08F7190700097FF
+:200BC00021F0029709F0DDC00CC080913202813009F0D7C010922D02333069F580932D02AF
+:200BE0002AC080913202882331F520913402277009F4C7C02093E9008091EB0080FFC1C05B
+:200C0000333021F48091EB00806213C08091EB0080618093EB0081E090E002C0880F991FEE
+:200C20002A95E2F78093EA001092EA008091EB0088608093EB001092E9008091E800877F27
+:200C400083C0882309F09CC0109132028091E800877F8093E800E8DC04C08EB3882309F411
+:200C600090C08091E80080FFF8CF812F8F7711F492E001C093E09EBB80688093E30081C00C
+:200C80008058823008F07CC0809132029091330223E08C3D920799F55FB7F894DE011596DC
+:200CA0004EE020E030E061E2E42FF0E060935700849120FF03C082958F704F5F982F9F70F5
+:200CC000892F805D8A3308F0895F8C9311961C9211972F5F3F4F12962431310529F75FBF39
+:200CE0008AE28B8383E08C838091E800877F8093E800CE0103966AE270E0E4DC11C0609188
+:200D00003402AE014F5F5F4F2CDCBC010097C9F18091E800877F8093E80089819A812BDD55
+:200D20008091E8008B778093E8002BC0803841F58091E800877F8093E80080912E02809396
+:200D4000F1008091E8008E778093E8006DDC19C08823B1F490913202923098F48091E8009B
+:200D6000877F8093E80090932E025EDC80912E02882311F483E001C084E08EBBF8DA01C090
+:200D8000F3DA8091E80083FF0AC08091EB0080628093EB008091E800877F8093E800AC9629
+:200DA0000FB6F894DEBF0FBECDBFCF91DF911F91089508951F938EB3882361F01091E900B9
+:200DC0001092E9008091E80083FF01C098DE17701093E9001F9108950895FC018EB38430E7
+:200DE00021F587859089A189B2890097A105B105E1F085818093E9008091E80082FF15C03E
+:200E00008091F200882319F42FEF3FEF04C08091F100282F30E08091F200882341F48091AA
+:200E2000E8008B778093E80002C02FEF3FEFC9010895FC018EB3843011F587859089A18911
+:200E4000B2890097A105B105D1F081818093E9008091F2008823A9F09091E8008091E8005C
+:200E60008E778093E80095FD0CC0FDDB982F882349F48091E8008E778093E80003C092E05F
+:200E800001C090E0892F0895FC018EB3843051F487859089A189B2890097A105B10511F017
+:200EA000CF01C7CF08951F93FC01162F8EB38430D9F487859089A189B2890097A105B105FC
+:200EC00099F081818093E9008091E80085FD08C08091E8008E778093E800C5DB882329F4E7
+:200EE0001093F10080E001C082E01F9108950F931F93CF93DF93EC010D96FC0189E0DF0190
+:200F00001D928A95E9F72A813B8109818C81882311F410E001C014E0C90151DB182B126025
+:200F2000802F61E8412F59DB882329F12E813F810D818885882311F410E001C014E0C90127
+:200F40003EDB182B1260802F60E8412F46DB882391F02A853B8509858C85882311F410E061
+:200F600001C014E0C9012BDB182B1260802F61EC412F33DB01C080E0DF91CF911F910F917C
+:200F80000895CF93DF93EC018091E80083FF60C0888190E020913402309135022817390781
+:200FA00009F056C080913102813261F0823220F4803209F04DC019C0823269F1833209F0C5
+:200FC00047C038C080913002813A09F041C08091E800877F8093E800CE010F9667E070E015
+:200FE00071DB8091E8008B7713C080913002813279F58091E800877F8093E800CE010F9605
+:2010000067E070E013DCCE01E9D88091E8008E778093E8001DC0809130028132C9F4809120
+:20102000E800877F8093E800809132028D87CE016ED90DC080913002813251F48091E80057
+:20104000877F8093E800CE0160913202C5DEECDADF91CF910895A1E21A2EAA1BBB1BFD0161
+:201060000DC0AA1FBB1FEE1FFF1FA217B307E407F50720F0A21BB30BE40BF50B661F771FE6
+:20108000881F991F1A9469F760957095809590959B01AC01BD01CF01089597FB092E052647
+:2010A0000ED057FD04D0D7DF0AD0001C38F450954095309521953F4F4F4F5F4F0895F6F7B9
+:2010C00090958095709561957F4F8F4F9F4F0895F894FFCF000340000004400000020800B9
+:0C10E000000000000000000000001400F0
+:00000001FF

compiled/DUE_16u2_reflash/16u2-out2.hex

@@ -0,0 +1,137 @@
+:20000000A7C00000C0C00000BEC00000BCC00000BAC00000B8C00000B6C00000B4C0000023
+:20002000B2C00000B0C00000AEC00000C1C4000085C40000A8C00000A6C00000A4C0000070
+:20004000A2C00000A0C000009EC000009CC000009AC0000098C0000096C0000021C100003A
+:2000600092C0000090C000008EC000008CC000008AC0000088C0000086C0000084C0000028
+:2000800082C0000080C000007EC000007CC000007AC0000078C000001201100102000008C4
+:2000A00041233D0001000102DC0109023E00020100C0320904000001020201000524000143
+:2000C00010042402060524060001070582030800FF09040100020A000000070504024000AC
+:2000E0000107058302400001040309043203410072006400750069006E006F0020002800CA
+:200100007700770077002E00610072006400750069006E006F002E0063006300290000003D
+:200120002E03410072006400750069006E006F0020004400750065002000500072006F002D
+:2001400067002E00200050006F0072007400000011241FBECFEFD2E0DEBFCDBF11E0A0E029
+:20016000B1E0E4EDF0E102C005900D92A831B107D9F712E0A8E1B1E001C01D92A833B107E6
+:20018000E1F72BD1A5C73CCF9C01DC01AE57BF4FED91FC91119741911196FC93EE93805873
+:2001A0009F4FE817F90711F42D933C939FB7F894F901EC57FF4F8081815080839FBF842F6B
+:2001C0000895882311F03F9A01C03F9847980895882311F046980895469A0895DF92EF9253
+:2001E000FF920F931F93FC018489813019F0823019F404C010E303C010E001C010E283896E
+:20020000823009F418608589873031F0883031F0863029F4126003C0146001C016601092A3
+:20022000C9001092C8001092CA000785F088E188D288202F3F2D4E2D5D2D10921E01203B7C
+:2002400084E0380780E0480780E0580719F481E080931E01CA01B90122E030E040E050E006
+:200260001CD720583B47414E5F4FCA01B901202F3F2D4E2D5D2DEFD6215030403093CD00D9
+:200280002093CC001093CA0082E08093C80088E98093C9001F910F91FF90EF90DF9008957E
+:2002A0001F920F920FB60F9211242F938F939F93EF93FF939091CE008EB38430F1F4E091ED
+:2002C000A201F091A3019083E091A201F091A301CF0101969093A3018093A201825A914079
+:2002E00021F482E291E0928381839FB7F8948091A6018F5F8093A6019FBFFF91EF919F911B
+:200300008F912F910F900FBE0F901F901895FC0140911A0140931B0180911C0180931D015F
+:200320008585282F30E02170307020931A01858590E096958795817080931C0180911E013B
+:20034000882339F088E790E090931901809318010895442341F4222331F082E390E09093EA
+:20036000190180931801089580E091E00AC680E091E0BDC584B7877F84BF88E10FB6F89468
+:2003800080936000109260000FBE81E01ADF16BC83E085BD86B58831E8F315BC16BC80E078
+:2003A00010DF469A3E9A87E690E09093CD008093CC0086E08093CA001092C80088E18093C1
+:2003C000C900539A5A9A8AB180638AB98BB180638BB9A9D284E085BD08950F931F93CF933B
+:2003E000DF93C8DF2FB7F89487EA91E0909328028093270290932A02809329022FBF2FB7A6
+:20040000F89482E291E09093A3018093A2019093A5018093A4012FBF7894C7EAD1E003E03E
+:200420008FB7F89490912B028FBF903809F180E091E0D3D497FD1CC0E0912702F09128025F
+:200440008083E0912702F0912802CF01019690932802809327028752924011F4D283C1831B
+:200460009FB7F89480912B028F5F80932B029FBF8FB7F8941091A6018FBFA89903C011361D
+:2004800008F456C0A89A8091A601882361F05D9800931F0108C082E291E076DE682F80E0C4
+:2004A00091E001D511501123B1F780911F01882351F080911F01815080931F0180911F0135
+:2004C000882309F45D9A80912001882351F08091200181508093200180912001882309F44E
+:2004E0005C9A809118019091190118161906E4F4CC97CD9710F481E001C080E069DE8091D7
+:200500001801909119010197C29710F481E001C080E057DE809118019091190101979093BB
+:2005200019018093180104C080E052DE80E049DE8FB7F89490912B028FBF992369F087EAA6
+:2005400091E022DE982F8091C80085FFFCCF9093CE005C980093200180E091E095D42AD46A
+:200560005FCFDA01923049F0933061F09130F9F4E8E9F0E022E130E01EC0EAEAF0E02EE36E
+:2005800030E019C0813049F0813018F0823079F408C0E8EEF0E0849107C0ECEEF0E08491A7
+:2005A00003C0E0E2F1E08491282F30E004C0E0E0F0E020E030E0ED93FC93C901089528E087
+:2005C00030E040E003C04F5F220F331F28173907D0F3842F8295807F08958093E900809142
+:2005E000EB0081608093EB001092ED006093EC004093ED008091EE00881F8827881F08956A
+:200600001092F40090E09093E9001092F0001092E8001092ED008091EB008E7F8093EB0016
+:200620009F5F953081F708958091300288238CF403C08EB38823B1F08091E80082FFF9CFE2
+:200640008091E8008B778093E80008958EB3882349F08091E80080FFF9CF8091E8008E77A4
+:200660008093E800089594E68091EC0080FF05C08091E80080FF05C023C08091E80082FD8F
+:200680001FC08EB3882311F482E008958EB3853011F483E008958091EB0085FF02C081E0ED
+:2006A00008958091E10082FFDFCF8091E1008B7F8093E100992311F484E008959150D4CF46
+:2006C00080E008959C0140913602509137024617570718F4F90120E038C06115710511F0B7
+:2006E000AB01F8CF8091E8008E778093E80040E050E0F0CF8091E80083FF02C081E0089544
+:200700008091E80082FD2DC08EB3882381F18EB3853079F18091E80080FF17C09091F20054
+:2007200006C081918093F100415050409F5F4115510511F09830A8F320E0983009F421E0E8
+:200740008091E8008E778093E8004115510591F6222381F606C08EB3882349F08EB38530D0
+:2007600041F08091E80082FFF6CF80E0089582E0089583E008959C0140913602509137024D
+:200780004617570710F490E03BC06115710511F0AB01F9CF8091E8008E778093E80040E0B5
+:2007A00050E0F1CF8091E80083FF02C081E008958091E80082FD30C08EB3882399F18EB3EF
+:2007C000853091F18091E80080FF1AC08091F20009C0F9012F5F3F4FE491E093F100415044
+:2007E00050408F5F4115510511F0883090F390E0883009F491E08091E8008E778093E80004
+:200800004115510579F6992369F606C08EB3882349F08EB3853041F08091E80082FFF6CF51
+:2008200080E0089582E0089583E008959C016115710529F48091E8008B778093E800F90126
+:2008400020C08091E80083FF02C081E008958EB3882339F18EB3853031F18091E80082FFD5
+:20086000F0CF06C08091F10081936150704021F08091F2008823B1F78091E8008B77809307
+:20088000E80061157105E9F606C08EB3882349F08EB3853041F08091E80080FFF6CF80E0F6
+:2008A000089582E0089583E0089542D044D01EBA10922E0210922D0210922C0284E089BD81
+:2008C00089B5826089BD09B400FEFDCF8091D800982F9F779093D80080688093D800809186
+:2008E00063008E7F809363008091D8008F7D8093D8008091E0008E7F8093E0008091E1004F
+:200900008E7F8093E1008091E20081608093E2008091E100877F8093E1008091E200886046
+:200920008093E2000895C1DF81E080932F0208951092E20008951092E10008951F920F92B0
+:200940000FB60F9211241F932F933F934F935F936F937F938F939F93AF93BF93EF93FF93D2
+:20096000E9EEF0E0108117701082E0EFF0E08081877F80837894C3D0F894A9EEB0E01C927D
+:20098000E0EFF0E08081886080831C93FF91EF91BF91AF919F918F917F916F915F914F914D
+:2009A0003F912F911F910F900FBE0F901F9018951F920F920FB60F9211242F933F934F932D
+:2009C0005F936F937F938F939F93AF93BF93EF93FF938091E10080FF1BC08091E20080FF57
+:2009E00017C08091E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E2006F
+:200A00008091D80080628093D80019BC1EBAD1D18091E10084FF29C08091E20084FF25C018
+:200A200084E089BD89B5826089BD09B400FEFDCF8091D8008F7D8093D8008091E1008F7E40
+:200A40008093E1008091E2008F7E8093E2008091E20081608093E20080912E02882311F4F3
+:200A600081E001C084E08EBBA4D18091E10083FF27C08091E20083FF23C08091E100877F87
+:200A80008093E10082E08EBB10922E028091E1008E7F8093E1008091E2008E7F8093E200FD
+:200AA0008091E20080618093E200AADD80E060E042E093DD8091F00088608093F00079D17E
+:200AC0008091E10082FF0AC08091E20082FF06C08091E1008B7F8093E1006BD1FF91EF9163
+:200AE000BF91AF919F918F917F916F915F914F913F912F910F900FBE0F901F9018951F938D
+:200B0000DF93CF93CDB7DEB7AC970FB6F894DEBF0FBECDBFE0E3F2E08091F100819322E0B1
+:200B2000E833F207C9F78091300230913102353009F487C0363040F43130C9F1313070F08B
+:200B4000333009F01DC133C0383009F4EFC0393009F4FEC0363009F013C192C0803821F0E2
+:200B6000823809F00DC108C090912C0280912D02882399F0926011C0809134028770809355
+:200B8000E9008091EB0090E025E0969587952A95E1F7982F91701092E9008091E800877FCB
+:200BA0008093E8009093F1001092F100CAC0882319F0823009F0E4C090E08F7190700097FF
+:200BC00021F0029709F0DDC00CC080913202813009F0D7C010922D02333069F580932D02AF
+:200BE0002AC080913202882331F520913402277009F4C7C02093E9008091EB0080FFC1C05B
+:200C0000333021F48091EB00806213C08091EB0080618093EB0081E090E002C0880F991FEE
+:200C20002A95E2F78093EA001092EA008091EB0088608093EB001092E9008091E800877F27
+:200C400083C0882309F09CC0109132028091E800877F8093E800E8DC04C08EB3882309F411
+:200C600090C08091E80080FFF8CF812F8F7711F492E001C093E09EBB80688093E30081C00C
+:200C80008058823008F07CC0809132029091330223E08C3D920799F55FB7F894DE011596DC
+:200CA0004EE020E030E061E2E42FF0E060935700849120FF03C082958F704F5F982F9F70F5
+:200CC000892F805D8A3308F0895F8C9311961C9211972F5F3F4F12962431310529F75FBF39
+:200CE0008AE28B8383E08C838091E800877F8093E800CE0103966AE270E0E4DC11C0609188
+:200D00003402AE014F5F5F4F2CDCBC010097C9F18091E800877F8093E80089819A812BDD55
+:200D20008091E8008B778093E8002BC0803841F58091E800877F8093E80080912E02809396
+:200D4000F1008091E8008E778093E8006DDC19C08823B1F490913202923098F48091E8009B
+:200D6000877F8093E80090932E025EDC80912E02882311F483E001C084E08EBBF8DA01C090
+:200D8000F3DA8091E80083FF0AC08091EB0080628093EB008091E800877F8093E800AC9629
+:200DA0000FB6F894DEBF0FBECDBFCF91DF911F91089508951F938EB3882361F01091E900B9
+:200DC0001092E9008091E80083FF01C098DE17701093E9001F9108950895FC018EB38430E7
+:200DE00021F587859089A189B2890097A105B105E1F085818093E9008091E80082FF15C03E
+:200E00008091F200882319F42FEF3FEF04C08091F100282F30E08091F200882341F48091AA
+:200E2000E8008B778093E80002C02FEF3FEFC9010895FC018EB3843011F587859089A18911
+:200E4000B2890097A105B105D1F081818093E9008091F2008823A9F09091E8008091E8005C
+:200E60008E778093E80095FD0CC0FDDB982F882349F48091E8008E778093E80003C092E05F
+:200E800001C090E0892F0895FC018EB3843051F487859089A189B2890097A105B10511F017
+:200EA000CF01C7CF08951F93FC01162F8EB38430D9F487859089A189B2890097A105B105FC
+:200EC00099F081818093E9008091E80085FD08C08091E8008E778093E800C5DB882329F4E7
+:200EE0001093F10080E001C082E01F9108950F931F93CF93DF93EC010D96FC0189E0DF0190
+:200F00001D928A95E9F72A813B8109818C81882311F410E001C014E0C90151DB182B126025
+:200F2000802F61E8412F59DB882329F12E813F810D818885882311F410E001C014E0C90127
+:200F40003EDB182B1260802F60E8412F46DB882391F02A853B8509858C85882311F410E061
+:200F600001C014E0C9012BDB182B1260802F61EC412F33DB01C080E0DF91CF911F910F917C
+:200F80000895CF93DF93EC018091E80083FF60C0888190E020913402309135022817390781
+:200FA00009F056C080913102813261F0823220F4803209F04DC019C0823269F1833209F0C5
+:200FC00047C038C080913002813A09F041C08091E800877F8093E800CE010F9667E070E015
+:200FE00071DB8091E8008B7713C080913002813279F58091E800877F8093E800CE010F9605
+:2010000067E070E013DCCE01E9D88091E8008E778093E8001DC0809130028132C9F4809120
+:20102000E800877F8093E800809132028D87CE016ED90DC080913002813251F48091E80057
+:20104000877F8093E800CE0160913202C5DEECDADF91CF910895A1E21A2EAA1BBB1BFD0161
+:201060000DC0AA1FBB1FEE1FFF1FA217B307E407F50720F0A21BB30BE40BF50B661F771FE6
+:20108000881F991F1A9469F760957095809590959B01AC01BD01CF01089597FB092E052647
+:2010A0000ED057FD04D0D7DF0AD0001C38F450954095309521953F4F4F4F5F4F0895F6F7B9
+:2010C00090958095709561957F4F8F4F9F4F0895F894FFCF000340000004400000020800B9
+:0C10E000000000000000000000001400F0
+:00000001FF

compiled/DUE_16u2_reflash/16u2-out3.hex

@@ -0,0 +1,137 @@
+:20000000A7C00000C0C00000BEC00000BCC00000BAC00000B8C00000B6C00000B4C0000023
+:20002000B2C00000B0C00000AEC00000CBC400008FC40000A8C00000A6C00000A4C000005C
+:20004000A2C00000A0C000009EC000009CC000009AC0000098C0000096C0000021C100003A
+:2000600092C0000090C000008EC000008CC000008AC0000088C0000086C0000084C0000028
+:2000800082C0000080C000007EC000007CC000007AC0000078C000001201100102000008C4
+:2000A00041233D0001000102DC0109023E00020100C0320904000001020201000524000143
+:2000C00010042402060524060001070582030800FF09040100020A000000070504024000AC
+:2000E0000107058302400001040309043203410072006400750069006E006F0020002800CA
+:200100007700770077002E00610072006400750069006E006F002E0063006300290000003D
+:200120002E03410072006400750069006E006F0020004400750065002000500072006F002D
+:2001400067002E00200050006F0072007400000011241FBECFEFD2E0DEBFCDBF11E0A0E029
+:20016000B1E0E8EEF0E102C005900D92A831B107D9F712E0A8E1B1E001C01D92A833B107E1
+:20018000E1F722D1AFC73CCF9C01DC01AE57BF4FED91FC91119741911196FC93EE93805872
+:2001A0009F4FE817F90711F42D933C939FB7F894F901EC57FF4F8081815080839FBF842F6B
+:2001C0000895882311F03F9A01C03F9847980895882311F046980895469A0895DF92EF9253
+:2001E000FF920F931F93FC018489813019F0823019F404C010E303C010E001C010E283896E
+:20020000823009F418608589873031F0883031F0863029F4126003C0146001C016601092A3
+:20022000C9001092C8001092CA000785F088E188D288202F3F2D4E2D5D2D10921E01203B7C
+:2002400084E0380780E0480780E0580719F481E080931E01CA01B90122E030E040E050E006
+:2002600026D720583B47414E5F4FCA01B901202F3F2D4E2D5D2DF9D6215030403093CD00C5
+:200280002093CC001093CA0082E08093C80088E98093C9001F910F91FF90EF90DF9008957E
+:2002A0001F920F920FB60F9211242F938F939F93EF93FF939091CE008EB38430F1F4E091ED
+:2002C000A201F091A3019083E091A201F091A301CF0101969093A3018093A201825A914079
+:2002E00021F482E291E0928381839FB7F8948091A6018F5F8093A6019FBFFF91EF919F911B
+:200300008F912F910F900FBE0F901F901895FC0140911A0140931B0180911C0180931D015F
+:200320008585282F30E02170307020931A01858590E096958795817080931C0180911E013B
+:20034000882339F08FE590E090931901809318010895442341F4222331F08EE190E09093DB
+:20036000190180931801089580E091E014C680E091E0C7C51F9384B7877F84BF18E10FB69E
+:20038000F89410936000109260000FBE80E019DF469A3E9A87E690E09093CD008093CC0043
+:2003A00086E08093CA001092C8001093C900539A5A9A8AB180638AB98BB180638BB9BDD2F0
+:2003C00084E085BD1F9108950F931F93CF93DF93D1DF2FB7F89487EA91E09093280280939E
+:2003E000270290932A02809329022FBF2FB7F89482E291E09093A3018093A2019093A501CC
+:200400008093A4012FBF7894C7EAD1E003E08FB7F89490912B028FBF903809F180E091E0E4
+:20042000E6D497FD1CC0E0912702F09128028083E0912702F0912802CF0101969093280251
+:20044000809327028752924011F4D283C1839FB7F89480912B028F5F80932B029FBF8FB725
+:20046000F8941091A6018FBFA89903C0113608F469C0A89A8091A601882361F05D9800936C
+:200480001F0108C082E291E07FDE682F80E091E014D511501123B1F780911F01882351F097
+:2004A00080911F01815080931F0180911F01882309F45D9A80912001882351F080912001E7
+:2004C00081508093200180912001882309F45C9A8091180190911901181619067CF58F3560
+:2004E000910521F481E074DE80E06BDE8091180190911901839721F480E06ADE80E061DE1A
+:200500008091180190911901499721F480E060DE81E057DE8091180190911901019721F43B
+:2005200080E056DE80E04DDE80911801909119010197909319018093180104C080E048DEEC
+:2005400080E03FDE8FB7F89490912B028FBF992369F087EA91E018DE982F8091C80085FF9F
+:20056000FCCF9093CE005C980093200180E091E095D42AD44CCFDA01923049F0933061F0DA
+:200580009130F9F4E8E9F0E022E130E01EC0EAEAF0E02EE330E019C0813049F0813018F0DA
+:2005A000823079F408C0E8EEF0E0849107C0ECEEF0E0849103C0E0E2F1E08491282F30E041
+:2005C00004C0E0E0F0E020E030E0ED93FC93C901089528E030E040E003C04F5F220F331F15
+:2005E00028173907D0F3842F8295807F08958093E9008091EB0081608093EB001092ED00ED
+:200600006093EC004093ED008091EE00881F8827881F08951092F40090E09093E9001092EE
+:20062000F0001092E8001092ED008091EB008E7F8093EB009F5F953081F70895809130028F
+:2006400088238CF403C08EB38823B1F08091E80082FFF9CF8091E8008B778093E80008954A
+:200660008EB3882349F08091E80080FFF9CF8091E8008E778093E800089594E68091EC0008
+:2006800080FF05C08091E80080FF05C023C08091E80082FD1FC08EB3882311F482E00895AF
+:2006A0008EB3853011F483E008958091EB0085FF02C081E008958091E10082FFDFCF8091CD
+:2006C000E1008B7F8093E100992311F484E008959150D4CF80E008959C0140913602509171
+:2006E00037024617570718F4F90120E038C06115710511F0AB01F8CF8091E8008E77809397
+:20070000E80040E050E0F0CF8091E80083FF02C081E008958091E80082FD2DC08EB3882356
+:2007200081F18EB3853079F18091E80080FF17C09091F20006C081918093F1004150504088
+:200740009F5F4115510511F09830A8F320E0983009F421E08091E8008E778093E800411576
+:20076000510591F6222381F606C08EB3882349F08EB3853041F08091E80082FFF6CF80E02F
+:20078000089582E0089583E008959C0140913602509137024617570710F490E03BC061155D
+:2007A000710511F0AB01F9CF8091E8008E778093E80040E050E0F1CF8091E80083FF02C008
+:2007C00081E008958091E80082FD30C08EB3882399F18EB3853091F18091E80080FF1AC073
+:2007E0008091F20009C0F9012F5F3F4FE491E093F100415050408F5F4115510511F08830CA
+:2008000090F390E0883009F491E08091E8008E778093E8004115510579F6992369F606C0CA
+:200820008EB3882349F08EB3853041F08091E80082FFF6CF80E0089582E0089583E0089531
+:200840009C016115710529F48091E8008B778093E800F90120C08091E80083FF02C081E084
+:2008600008958EB3882339F18EB3853031F18091E80082FFF0CF06C08091F10081936150E7
+:20088000704021F08091F2008823B1F78091E8008B778093E80061157105E9F606C08EB379
+:2008A000882349F08EB3853041F08091E80080FFF6CF80E0089582E0089583E0089542D0E2
+:2008C00044D01EBA10922E0210922D0210922C0284E089BD89B5826089BD09B400FEFDCF22
+:2008E0008091D800982F9F779093D80080688093D800809163008E7F809363008091D80084
+:200900008F7D8093D8008091E0008E7F8093E0008091E1008E7F8093E1008091E200816028
+:200920008093E2008091E100877F8093E1008091E20088608093E2000895C1DF81E0809355
+:200940002F0208951092E20008951092E10008951F920F920FB60F9211241F932F933F9355
+:200960004F935F936F937F938F939F93AF93BF93EF93FF93E9EEF0E0108117701082E0EF73
+:20098000F0E08081877F80837894C3D0F894A9EEB0E01C92E0EFF0E08081886080831C9343
+:2009A000FF91EF91BF91AF919F918F917F916F915F914F913F912F911F910F900FBE0F901C
+:2009C0001F9018951F920F920FB60F9211242F933F934F935F936F937F938F939F93AF93BC
+:2009E000BF93EF93FF938091E10080FF1BC08091E20080FF17C08091E1008E7F8093E10009
+:200A00008091E2008E7F8093E2008091E20080618093E2008091D80080628093D80019BC8D
+:200A20001EBAD1D18091E10084FF29C08091E20084FF25C084E089BD89B5826089BD09B4B6
+:200A400000FEFDCF8091D8008F7D8093D8008091E1008F7E8093E1008091E2008F7E8093E6
+:200A6000E2008091E20081608093E20080912E02882311F481E001C084E08EBBA4D1809185
+:200A8000E10083FF27C08091E20083FF23C08091E100877F8093E10082E08EBB10922E024B
+:200AA0008091E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E200AADDFE
+:200AC00080E060E042E093DD8091F00088608093F00079D18091E10082FF0AC08091E2007E
+:200AE00082FF06C08091E1008B7F8093E1006BD1FF91EF91BF91AF919F918F917F916F9183
+:200B00005F914F913F912F910F900FBE0F901F9018951F93DF93CF93CDB7DEB7AC970FB667
+:200B2000F894DEBF0FBECDBFE0E3F2E08091F100819322E0E833F207C9F7809130023091AE
+:200B40003102353009F487C0363040F43130C9F1313070F0333009F01DC133C0383009F4B1
+:200B6000EFC0393009F4FEC0363009F013C192C0803821F0823809F00DC108C090912C02BC
+:200B800080912D02882399F0926011C08091340287708093E9008091EB0090E025E0969548
+:200BA00087952A95E1F7982F91701092E9008091E800877F8093E8009093F1001092F1008E
+:200BC000CAC0882319F0823009F0E4C090E08F719070009721F0029709F0DDC00CC0809164
+:200BE0003202813009F0D7C010922D02333069F580932D022AC080913202882331F52091FB
+:200C00003402277009F4C7C02093E9008091EB0080FFC1C0333021F48091EB00806213C0C2
+:200C20008091EB0080618093EB0081E090E002C0880F991F2A95E2F78093EA001092EA00D6
+:200C40008091EB0088608093EB001092E9008091E800877F83C0882309F09CC01091320210
+:200C60008091E800877F8093E800E8DC04C08EB3882309F490C08091E80080FFF8CF812FCA
+:200C80008F7711F492E001C093E09EBB80688093E30081C08058823008F07CC08091320228
+:200CA0009091330223E08C3D920799F55FB7F894DE0115964EE020E030E061E2E42FF0E05B
+:200CC00060935700849120FF03C082958F704F5F982F9F70892F805D8A3308F0895F8C93E8
+:200CE00011961C9211972F5F3F4F12962431310529F75FBF8AE28B8383E08C838091E80085
+:200D0000877F8093E800CE0103966AE270E0E4DC11C060913402AE014F5F5F4F2CDCBC0146
+:200D20000097C9F18091E800877F8093E80089819A812BDD8091E8008B778093E8002BC05A
+:200D4000803841F58091E800877F8093E80080912E028093F1008091E8008E778093E8006D
+:200D60006DDC19C08823B1F490913202923098F48091E800877F8093E80090932E025EDCD7
+:200D800080912E02882311F483E001C084E08EBBEEDA01C0E9DA8091E80083FF0AC08091EF
+:200DA000EB0080628093EB008091E800877F8093E800AC960FB6F894DEBF0FBECDBFCF9185
+:200DC000DF911F91089508951F938EB3882361F01091E9001092E9008091E80083FF01C079
+:200DE00098DE17701093E9001F9108950895FC018EB3843021F587859089A189B289009757
+:200E0000A105B105E1F085818093E9008091E80082FF15C08091F200882319F42FEF3FEF4D
+:200E200004C08091F100282F30E08091F200882341F48091E8008B778093E80002C02FEFCC
+:200E40003FEFC9010895FC018EB3843011F587859089A189B2890097A105B105D1F08181C5
+:200E60008093E9008091F2008823A9F09091E8008091E8008E778093E80095FD0CC0FDDBF7
+:200E8000982F882349F48091E8008E778093E80003C092E001C090E0892F0895FC018EB3B1
+:200EA000843051F487859089A189B2890097A105B10511F0CF01C7CF08951F93FC01162FC4
+:200EC0008EB38430D9F487859089A189B2890097A105B10599F081818093E9008091E80053
+:200EE00085FD08C08091E8008E778093E800C5DB882329F41093F10080E001C082E01F9180
+:200F000008950F931F93CF93DF93EC010D96FC0189E0DF011D928A95E9F72A813B81098197
+:200F20008C81882311F410E001C014E0C90151DB182B1260802F61E8412F59DB882329F143
+:200F40002E813F810D818885882311F410E001C014E0C9013EDB182B1260802F60E8412F33
+:200F600046DB882391F02A853B8509858C85882311F410E001C014E0C9012BDB182B12603C
+:200F8000802F61EC412F33DB01C080E0DF91CF911F910F910895CF93DF93EC018091E8003F
+:200FA00083FF60C0888190E020913402309135022817390709F056C080913102813261F061
+:200FC000823220F4803209F04DC019C0823269F1833209F047C038C080913002813A09F006
+:200FE00041C08091E800877F8093E800CE010F9667E070E071DB8091E8008B7713C08091C0
+:201000003002813279F58091E800877F8093E800CE010F9667E070E013DCCE01DFD88091F2
+:20102000E8008E778093E8001DC0809130028132C9F48091E800877F8093E80080913202F9
+:201040008D87CE0164D90DC080913002813251F48091E800877F8093E800CE01609132027A
+:20106000C5DEECDADF91CF910895A1E21A2EAA1BBB1BFD010DC0AA1FBB1FEE1FFF1FA217E2
+:20108000B307E407F50720F0A21BB30BE40BF50B661F771F881F991F1A9469F760957095B3
+:2010A000809590959B01AC01BD01CF01089597FB092E05260ED057FD04D0D7DF0AD0001CDC
+:2010C00038F450954095309521953F4F4F4F5F4F0895F6F790958095709561957F4F8F4F6A
+:2010E0009F4F0895F894FFCF00034000000440000002080000000000000000000000140066
+:00000001FF

compiled/DUE_16u2_reflash/16u2.hex

@@ -0,0 +1,273 @@
+:10000000A7C00000C0C00000BEC00000BCC000000F
+:10001000BAC00000B8C00000B6C00000B4C0000004
+:10002000B2C00000B0C00000AEC00000C1C40000FB
+:1000300085C40000A8C00000A6C00000A4C0000045
+:10004000A2C00000A0C000009EC000009CC0000034
+:100050009AC0000098C0000096C0000021C10000B6
+:1000600092C0000090C000008EC000008CC0000054
+:100070008AC0000088C0000086C0000084C0000064
+:1000800082C0000080C000007EC000007CC0000074
+:100090007AC0000078C000001201100102000008C0
+:1000A00041233D0001000102DC0109023E00020182
+:1000B00000C0320904000001020201000524000111
+:1000C0001004240206052406000107058203080027
+:1000D000FF09040100020A000000070504024000B5
+:1000E00001070583024000010403090432034100B3
+:1000F00072006400750069006E006F002000280027
+:100100007700770077002E006100720064007500B0
+:1001100069006E006F002E0063006300290000007C
+:100120002E03410072006400750069006E006F00CC
+:1001300020004400750065002000500072006F0030
+:1001400067002E00200050006F0072007400000055
+:1001500011241FBECFEFD2E0DEBFCDBF11E0A0E083
+:10016000B1E0E4EDF0E102C005900D92A831B107D5
+:10017000D9F712E0A8E1B1E001C01D92A833B107A0
+:10018000E1F72BD1A5C73CCF9C01DC01AE57BF4F97
+:10019000ED91FC91119741911196FC93EE9380584B
+:1001A0009F4FE817F90711F42D933C939FB7F894EC
+:1001B000F901EC57FF4F8081815080839FBF842FCE
+:1001C0000895882311F03F9A01C03F9847980895F9
+:1001D000882311F046980895469A0895DF92EF9289
+:1001E000FF920F931F93FC018489813019F08230B4
+:1001F00019F404C010E303C010E001C010E28389C9
+:10020000823009F418608589873031F0883031F008
+:10021000863029F4126003C0146001C01660109289
+:10022000C9001092C8001092CA000785F088E188C2
+:10023000D288202F3F2D4E2D5D2D10921E01203B88
+:1002400084E0380780E0480780E0580719F481E02F
+:1002500080931E01CA01B90122E030E040E050E085
+:100260001CD720583B47414E5F4FCA01B901202F90
+:100270003F2D4E2D5D2DEFD6215030403093CD00D7
+:100280002093CC001093CA0082E08093C80088E9D4
+:100290008093C9001F910F91FF90EF90DF90089518
+:1002A0001F920F920FB60F9211242F938F939F934B
+:1002B000EF93FF939091CE008EB38430F1F4E091F0
+:1002C000A201F091A3019083E091A201F091A3011A
+:1002D000CF0101969093A3018093A201825A91408D
+:1002E00021F482E291E0928381839FB7F894809118
+:1002F000A6018F5F8093A6019FBFFF91EF919F9111
+:100300008F912F910F900FBE0F901F901895FC01A9
+:1003100040911A0140931B0180911C0180931D01A3
+:100320008585282F30E02170307020931A01858553
+:1003300090E096958795817080931C0180911E01B5
+:10034000882339F088E790E0909319018093180191
+:100350000895442341F4222331F082E390E0909306
+:10036000190180931801089580E091E00AC680E0A9
+:1003700091E0BDC584B7877F84BF88E10FB6F8944C
+:1003800080936000109260000FBE81E01ADF16BCFF
+:1003900083E085BD86B58831E8F315BC16BC80E0E6
+:1003A00010DF469A3E9A87E690E09093CD008093C6
+:1003B000CC0086E08093CA001092C80088E1809348
+:1003C000C900539A5A9A8AB180638AB98BB1806303
+:1003D0008BB9A9D284E085BD08950F931F93CF9365
+:1003E000DF93C8DF2FB7F89487EA91E09093280253
+:1003F0008093270290932A02809329022FBF2FB760
+:10040000F89482E291E09093A3018093A2019093EB
+:10041000A5018093A4012FBF7894C7EAD1E003E03F
+:100420008FB7F89490912B028FBF903809F180E03C
+:1004300091E0D3D497FD1CC0E0912702F0912802EF
+:100440008083E0912702F0912802CF0101969093DA
+:100450002802809327028752924011F4D283C183ED
+:100460009FB7F89480912B028F5F80932B029FBFE0
+:100470008FB7F8941091A6018FBFA89903C01136C9
+:1004800008F456C0A89A8091A601882361F05D986F
+:1004900000931F0108C082E291E076DE682F80E0C1
+:1004A00091E001D511501123B1F780911F018823EC
+:1004B00051F080911F01815080931F0180911F0195
+:1004C000882309F45D9A80912001882351F080915E
+:1004D000200181508093200180912001882309F41C
+:1004E0005C9A809118019091190118161906E4F48C
+:1004F000CC97CD9710F481E001C080E069DE809157
+:100500001801909119010197C29710F481E001C080
+:1005100080E057DE80911801909119010197909326
+:1005200019018093180104C080E052DE80E049DEAA
+:100530008FB7F89490912B028FBF992369F087EAC7
+:1005400091E022DE982F8091C80085FFFCCF909328
+:10055000CE005C980093200180E091E095D42AD4ED
+:100560005FCFDA01923049F0933061F09130F9F4C5
+:10057000E8E9F0E022E130E01EC0EAEAF0E02EE334
+:1005800030E019C0813049F0813018F0823079F4C0
+:1005900008C0E8EEF0E0849107C0ECEEF0E0849152
+:1005A00003C0E0E2F1E08491282F30E004C0E0E0F5
+:1005B000F0E020E030E0ED93FC93C901089528E0DD
+:1005C00030E040E003C04F5F220F331F2817390788
+:1005D000D0F3842F8295807F08958093E9008091E5
+:1005E000EB0081608093EB001092ED006093EC00D3
+:1005F0004093ED008091EE00881F8827881F0895A2
+:100600001092F40090E09093E9001092F0001092A4
+:10061000E8001092ED008091EB008E7F8093EB005C
+:100620009F5F953081F708958091300288238CF484
+:1006300003C08EB38823B1F08091E80082FFF9CF28
+:100640008091E8008B778093E80008958EB388232B
+:1006500049F08091E80080FFF9CF8091E8008E7723
+:100660008093E800089594E68091EC0080FF05C037
+:100670008091E80080FF05C023C08091E80082FDE2
+:100680001FC08EB3882311F482E008958EB38530A5
+:1006900011F483E008958091EB0085FF02C081E0B2
+:1006A00008958091E10082FFDFCF8091E1008B7F90
+:1006B0008093E100992311F484E008959150D4CF00
+:1006C00080E008959C014091360250913702461710
+:1006D000570718F4F90120E038C06115710511F0D1
+:1006E000AB01F8CF8091E8008E778093E80040E07E
+:1006F00050E0F0CF8091E80083FF02C081E00895D0
+:100700008091E80082FD2DC08EB3882381F18EB3E5
+:10071000853079F18091E80080FF17C09091F20058
+:1007200006C081918093F100415050409F5F411578
+:10073000510511F09830A8F320E0983009F421E039
+:100740008091E8008E778093E8004115510591F67D
+:10075000222381F606C08EB3882349F08EB38530FC
+:1007600041F08091E80082FFF6CF80E0089582E0BA
+:10077000089583E008959C0140913602509137021C
+:100780004617570710F490E03BC06115710511F052
+:10079000AB01F9CF8091E8008E778093E80040E0CC
+:1007A00050E0F1CF8091E80083FF02C081E008951E
+:1007B0008091E80082FD30C08EB3882399F18EB31A
+:1007C000853091F18091E80080FF1AC08091F2009D
+:1007D00009C0F9012F5F3F4FE491E093F1004150D0
+:1007E00050408F5F4115510511F0883090F390E033
+:1007F000883009F491E08091E8008E778093E800DA
+:100800004115510579F6992369F606C08EB3882300
+:1008100049F08EB3853041F08091E80082FFF6CF39
+:1008200080E0089582E0089583E008959C016115B9
+:10083000710529F48091E8008B778093E800F90135
+:1008400020C08091E80083FF02C081E008958EB34C
+:10085000882339F18EB3853031F18091E80082FF31
+:10086000F0CF06C08091F10081936150704021F07B
+:100870008091F2008823B1F78091E8008B77809314
+:10088000E80061157105E9F606C08EB3882349F0CA
+:100890008EB3853041F08091E80080FFF6CF80E094
+:1008A000089582E0089583E0089542D044D01EBAAE
+:1008B00010922E0210922D0210922C0284E089BD1B
+:1008C00089B5826089BD09B400FEFDCF8091D80052
+:1008D000982F9F779093D80080688093D80080915C
+:1008E00063008E7F809363008091D8008F7D80931A
+:1008F000D8008091E0008E7F8093E0008091E1003D
+:100900008E7F8093E1008091E20081608093E2001D
+:100910008091E100877F8093E1008091E200886010
+:100920008093E2000895C1DF81E080932F02089553
+:100930001092E20008951092E10008951F920F9224
+:100940000FB60F9211241F932F933F934F935F93F2
+:100950006F937F938F939F93AF93BF93EF93FF9387
+:10096000E9EEF0E0108117701082E0EFF0E0808196
+:10097000877F80837894C3D0F894A9EEB0E01C926E
+:10098000E0EFF0E08081886080831C93FF91EF911D
+:10099000BF91AF919F918F917F916F915F914F9197
+:1009A0003F912F911F910F900FBE0F901F901895A0
+:1009B0001F920F920FB60F9211242F933F934F93D4
+:1009C0005F936F937F938F939F93AF93BF93EF93B7
+:1009D000FF938091E10080FF1BC08091E20080FFC7
+:1009E00017C08091E1008E7F8093E1008091E2004A
+:1009F0008E7F8093E2008091E20080618093E2002C
+:100A00008091D80080628093D80019BC1EBAD1D1E1
+:100A10008091E10084FF29C08091E20084FF25C01D
+:100A200084E089BD89B5826089BD09B400FEFDCF2F
+:100A30008091D8008F7D8093D8008091E1008F7ED7
+:100A40008093E1008091E2008F7E8093E2008091AC
+:100A5000E20081608093E20080912E02882311F4ED
+:100A600081E001C084E08EBBA4D18091E10083FFCE
+:100A700027C08091E20083FF23C08091E100877F3F
+:100A80008093E10082E08EBB10922E028091E10003
+:100A90008E7F8093E1008091E2008E7F8093E20060
+:100AA0008091E20080618093E200AADD80E060E056
+:100AB00042E093DD8091F00088608093F00079D16E
+:100AC0008091E10082FF0AC08091E20082FF06C0AF
+:100AD0008091E1008B7F8093E1006BD1FF91EF91DA
+:100AE000BF91AF919F918F917F916F915F914F9146
+:100AF0003F912F910F900FBE0F901F9018951F934D
+:100B0000DF93CF93CDB7DEB7AC970FB6F894DEBFC7
+:100B10000FBECDBFE0E3F2E08091F100819322E0CF
+:100B2000E833F207C9F78091300230913102353055
+:100B300009F487C0363040F43130C9F1313070F0FB
+:100B4000333009F01DC133C0383009F4EFC03930FB
+:100B500009F4FEC0363009F013C192C0803821F08C
+:100B6000823809F00DC108C090912C0280912D02AD
+:100B7000882399F0926011C080913402877080932D
+:100B8000E9008091EB0090E025E0969587952A9505
+:100B9000E1F7982F91701092E9008091E800877F2B
+:100BA0008093E8009093F1001092F100CAC088236E
+:100BB00019F0823009F0E4C090E08F7190700097D6
+:100BC00021F0029709F0DDC00CC080913202813023
+:100BD00009F0D7C010922D02333069F580932D02B1
+:100BE0002AC080913202882331F520913402277087
+:100BF00009F4C7C02093E9008091EB0080FFC1C0D9
+:100C0000333021F48091EB00806213C08091EB00BF
+:100C100080618093EB0081E090E002C0880F991F13
+:100C20002A95E2F78093EA001092EA008091EB00A7
+:100C300088608093EB001092E9008091E800877F44
+:100C400083C0882309F09CC0109132028091E80093
+:100C5000877F8093E800E8DC04C08EB3882309F422
+:100C600090C08091E80080FFF8CF812F8F7711F43A
+:100C700092E001C093E09EBB80688093E30081C056
+:100C80008058823008F07CC080913202909133020B
+:100C900023E08C3D920799F55FB7F894DE01159635
+:100CA0004EE020E030E061E2E42FF0E06093570096
+:100CB000849120FF03C082958F704F5F982F9F70A3
+:100CC000892F805D8A3308F0895F8C9311961C927E
+:100CD00011972F5F3F4F12962431310529F75FBFDF
+:100CE0008AE28B8383E08C838091E800877F809306
+:100CF000E800CE0103966AE270E0E4DC11C0609186
+:100D00003402AE014F5F5F4F2CDCBC010097C9F18C
+:100D10008091E800877F8093E80089819A812BDDAC
+:100D20008091E8008B778093E8002BC0803841F5F4
+:100D30008091E800877F8093E80080912E02809365
+:100D4000F1008091E8008E778093E8006DDC19C097
+:100D50008823B1F490913202923098F48091E800A7
+:100D6000877F8093E80090932E025EDC80912E02B4
+:100D7000882311F483E001C084E08EBBF8DA01C05F
+:100D8000F3DA8091E80083FF0AC08091EB00806273
+:100D90008093EB008091E800877F8093E800AC9619
+:100DA0000FB6F894DEBF0FBECDBFCF91DF911F917C
+:100DB000089508951F938EB3882361F01091E90080
+:100DC0001092E9008091E80083FF01C098DE17705F
+:100DD0001093E9001F9108950895FC018EB38430AB
+:100DE00021F587859089A189B2890097A105B10570
+:100DF000E1F085818093E9008091E80082FF15C0D1
+:100E00008091F200882319F42FEF3FEF04C0809106
+:100E1000F100282F30E08091F200882341F4809186
+:100E2000E8008B778093E80002C02FEF3FEFC90105
+:100E30000895FC018EB3843011F587859089A189CE
+:100E4000B2890097A105B105D1F081818093E900B5
+:100E50008091F2008823A9F09091E8008091E80049
+:100E60008E778093E80095FD0CC0FDDB982F8823DA
+:100E700049F48091E8008E778093E80003C092E007
+:100E800001C090E0892F0895FC018EB3843051F4A5
+:100E900087859089A189B2890097A105B10511F0D4
+:100EA000CF01C7CF08951F93FC01162F8EB3843056
+:100EB000D9F487859089A189B2890097A105B105E8
+:100EC00099F081818093E9008091E80085FD08C058
+:100ED0008091E8008E778093E800C5DB882329F4B1
+:100EE0001093F10080E001C082E01F9108950F93FC
+:100EF0001F93CF93DF93EC010D96FC0189E0DF0196
+:100F00001D928A95E9F72A813B8109818C8188238A
+:100F100011F410E001C014E0C90151DB182B12607C
+:100F2000802F61E8412F59DB882329F12E813F81F1
+:100F30000D818885882311F410E001C014E0C901F7
+:100F40003EDB182B1260802F60E8412F46DB8823A0
+:100F500091F02A853B8509858C85882311F410E062
+:100F600001C014E0C9012BDB182B1260802F61EC4B
+:100F7000412F33DB01C080E0DF91CF911F910F91B2
+:100F80000895CF93DF93EC018091E80083FF60C068
+:100F9000888190E02091340230913502281739077A
+:100FA00009F056C080913102813261F0823220F422
+:100FB000803209F04DC019C0823269F1833209F0E4
+:100FC00047C038C080913002813A09F041C0809119
+:100FD000E800877F8093E800CE010F9667E070E01D
+:100FE00071DB8091E8008B7713C0809130028132F1
+:100FF00079F58091E800877F8093E800CE010F9615
+:1010000067E070E013DCCE01E9D88091E8008E77CC
+:101010008093E8001DC0809130028132C9F4809134
+:10102000E800877F8093E800809132028D87CE01AF
+:101030006ED90DC080913002813251F48091E80068
+:10104000877F8093E800CE0160913202C5DEECDA42
+:10105000DF91CF910895A1E21A2EAA1BBB1BFD01BF
+:101060000DC0AA1FBB1FEE1FFF1FA217B307E40787
+:10107000F50720F0A21BB30BE40BF50B661F771FDF
+:10108000881F991F1A9469F76095709580959095BF
+:101090009B01AC01BD01CF01089597FB092E0526E8
+:1010A0000ED057FD04D0D7DF0AD0001C38F450957D
+:1010B0004095309521953F4F4F4F5F4F0895F6F77C
+:1010C00090958095709561957F4F8F4F9F4F0895B4
+:0410D000F894FFCFC2
+:1010D400000340000004400000020800000000007B
+:0810E4000000000000001400F0
+:00000001FF

compiled/DUE_16u2_reflash/get.sh

@@ -0,0 +1 @@
+../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem14201 -b 19200 -p m16u2 -vvv -U flash:r:16u2-out3.hex:i

compiled/DUE_16u2_reflash/reflash16u2DUE.sh

@@ -1 +1 @@
-../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem1411 -b 19200 -p m16u2 -vvv -U flash:w:16u2.hex:i
+../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem14201 -b 19200 -p m16u2 -vvv -U flash:w:16u2.hex:i

compiled/DUE_16u2_reflash/reflashOriginal.sh

@@ -0,0 +1 @@
+../tools/mac/tool-avrdude/avrdude -C ../tools/mac/tool-avrdude/avrdude.conf -c arduino -P /dev/cu.usbmodem14201 -b 19200 -p m16u2 -vvv -U flash:w:16u2-original.hex:i

compiled/due-5500/upload.sh

@@ -1,3 +1,3 @@
-export PORT=cu.usbmodem1411
+export PORT=cu.usbmodem14201
 echo . |  stty -f /dev/$PORT speed 1200
 ../tools/mac/tool-bossac/bossac -U false -p $PORT -i -e -w -v -b firmware.bin -R 

compiled/due-5500/uploadOTA.sh

@@ -0,0 +1 @@
+../tools/mac/arduinoOTA -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/due/uploadOTA.sh

@@ -0,0 +1 @@
+../tools/mac/arduinoOTA -address 192.168.88.21 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/lighthub21/update_bin.sh

@@ -0,0 +1 @@
+cp ../../.pio/build/lighthub21/firmware.bin .

compiled/lighthub21/uploadHello.sh

@@ -0,0 +1 @@
+../tools/mac/arduinoOTA -address 192.168.88.59 -port 65280 -username arduino -password password -sketch hello.bin -b -upload /sketch

compiled/lighthub21/uploadOTA.sh

@@ -0,0 +1 @@
+../tools/mac/arduinoOTA -address 192.168.11.172 -port 65280 -username arduino -password password -sketch firmware.bin -b -upload /sketch

compiled/update_bin.sh

@@ -1,12 +1,13 @@
-cp ../.pioenvs/controllino/firmware.hex controllino
+cp ../.pio/build/due/firmware.bin due
-cp ../.pioenvs/m5stack/firmware.bin m5stack
+cp ../.pio/build/controllino/firmware.hex controllino
-cp ../.pioenvs/mega2560slim-5100/firmware.hex mega2560slim-5100
+cp ../.pio/build/m5stack/firmware.bin m5stack
-cp ../.pioenvs/due-5100/firmware.bin due-5100
+cp ../.pio/build/mega2560slim-5100/firmware.hex mega2560slim-5100
-cp ../.pioenvs/mega2560-5100/firmware.hex mega2560-5100
+cp ../.pio/build/due-5100/firmware.bin due-5100
-cp ../.pioenvs/due-5500/firmware.bin due-5500
+cp ../.pio/build/mega2560-5100/firmware.hex mega2560-5100
-cp ../.pioenvs/nrf52840-5500/firmware.hex nrf52840-5500
+cp ../.pio/build/due-5500/firmware.bin due-5500
-cp ../.pioenvs/esp32-wifi/firmware.bin esp32-wifi
+cp ../.pio/build/nrf52840-5500/firmware.hex nrf52840-5500
-cp ../.pioenvs/stm32-enc2860/firmware.bin stm32-enc2860
+cp ../.pio/build/esp32-wifi/firmware.bin esp32-wifi
-cp ../.pioenvs/esp8266-wifi/firmware.bin esp8266-wifi
+cp ../.pio/build/stm32-enc2860/firmware.bin stm32-enc2860
-cp ../.pioenvs/lighthub21/firmware.bin lighthub21
+cp ../.pio/build/esp8266-wifi/firmware.bin esp8266-wifi
-cp ../.pioenvs/mega2560-5500/firmware.hex mega2560-5500
+cp ../.pio/build/lighthub21/firmware.bin lighthub21
+cp ../.pio/build/mega2560-5500/firmware.hex mega2560-5500

custom-build-flags/build_flags_controllino.sh

@@ -1,32 +0,0 @@
-#! /bin/bash
-# usage:
-# first make your own copy of template
-# cp build_flags_template.sh my_build_flags.sh
-# then edit, change or comment something
-# nano  my_build_flags.sh
-# and source it
-# source my_build_flags.sh
- #export FLAGS="$FLAGS -DMY_CONFIG_SERVER=lighthub.elistech.ru"
- #export FLAGS="$FLAGS -DWATCH_DOG_TICKER_DISABLE"
- #export FLAGS="$FLAGS -DUSE_1W_PIN=12"
- #export FLAGS="$FLAGS -DSD_CARD_INSERTED"
- export FLAGS="$FLAGS -DSERIAL_BAUD=115200"
-# export FLAGS="$FLAGS -DWiz5500"
- export FLAGS="$FLAGS -DDISABLE_FREERAM_PRINT"
- export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=C2:3E:1f:03:1B:1E"
-# export FLAGS="$FLAGS -DDMX_DISABLE"
-# export FLAGS="$FLAGS -DMODBUS_DISABLE"
-# export FLAGS="$FLAGS -DOWIRE_DISABLE"
- #export FLAGS="$FLAGS -DAVR_DMXOUT_PIN=18"
- #export FLAGS="$FLAGS -DCONTROLLINO"
-# export FLAGS="$FLAGS -DRESET_PIN=8"
-# export FLAGS="$FLAGS -DLAN_INIT_DELAY=2000"
-# export FLAGS="$FLAGS -DESP_WIFI_AP=vent"
-# export FLAGS="$FLAGS -DESP_WIFI_PWD=kk007remont"
-# export FLAGS="$FLAGS -DSYSLOG_ENABLE"
-export FLAGS="$FLAGS -DDEVICE_NAME=kk007_mega2560"
-export FLAGS="$FLAGS -DCOUNTER_DISABLE"
-export FLAGS="$FLAGS -DDHT_DISABLE"
-#export FLAGS="$FLAGS -DWITH_DOMOTICZ"
-#export FLAGS="$FLAGS -DWITH_PRINTEX_LIB"
- export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)

custom-build-flags/build_flags_nrf52840.sh

@@ -1,30 +0,0 @@
-#! /bin/bash
-# usage:
-# first make your own copy of template
-# cp build_flags_template.sh build_flags_ENVNAME.sh
-# then edit, change or comment something
- #export FLAGS="$FLAGS -DMY_CONFIG_SERVER=lazyhome.ru"
- export FLAGS="$FLAGS -DWATCH_DOG_TICKER_DISABLE"
- #export FLAGS="$FLAGS -DUSE_1W_PIN=12"
- #export FLAGS="$FLAGS -DSD_CARD_INSERTED"
- #export FLAGS="$FLAGS -DSERIAL_BAUD=115200"
- #export FLAGS="$FLAGS -DWiz5500"
- export FLAGS="$FLAGS -DDISABLE_FREERAM_PRINT"
- #export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:ff"
- #export FLAGS="$FLAGS -DDMX_DISABLE"
- #export FLAGS="$FLAGS -DMODBUS_DISABLE"
- #export FLAGS="$FLAGS -DOWIRE_DISABLE"
-# export FLAGS="$FLAGS -DAVR_DMXOUT_PIN=18"
-# export FLAGS="$FLAGS -DLAN_INIT_DELAY=2000"
-# export FLAGS="$FLAGS -DCONTROLLINO"
-# export FLAGS="$FLAGS -DWIFI_MANAGER_DISABLE"
-# export FLAGS="$FLAGS -DRESET_PIN=5"
-# export FLAGS="$FLAGS -DDHCP_RETRY_INTERVAL=60000"
-# export FLAGS="$FLAGS -DRESTART_LAN_ON_MQTT_ERRORS"
-# export FLAGS="$FLAGS -DW5500_CS_PIN=53"
-#export FLAGS="$FLAGS -std=gnu++11"
-#export FLAGS="$FLAGS -DDEVICE_NAME=MYDEVICE"
-#export FLAGS="$FLAGS -DDHT_COUNTER_DISABLE"
-#export FLAGS="$FLAGS -DWITH_PRINTEX_LIB"
-#export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
- echo $FLAGS

custom-build-flags/build_flags_template.sh

@@ -1,34 +0,0 @@
-#! /bin/bash
-# usage:
-# first make your own copy of template
-# cp build_flags_template.sh build_flags_ENVNAME.sh
-# then edit, change or comment something
-# export FLAGS="$FLAGS -DMY_CONFIG_SERVER=lazyhome.ru"
-# export FLAGS="$FLAGS -DWATCH_DOG_TICKER_DISABLE"
-# export FLAGS="$FLAGS -DUSE_1W_PIN=12"
-# export FLAGS="$FLAGS -DSD_CARD_INSERTED"
-# export FLAGS="$FLAGS -DSERIAL_BAUD=115200"
-# export FLAGS="$FLAGS -DWiz5500"
-# export FLAGS="$FLAGS -DDISABLE_FREERAM_PRINT"
-# export FLAGS="$FLAGS -DCUSTOM_FIRMWARE_MAC=de:ad:be:ef:fe:ff"
-# export FLAGS="$FLAGS -DDMX_DISABLE"
-# export FLAGS="$FLAGS -DMODBUS_DISABLE"
-# export FLAGS="$FLAGS -DOWIRE_DISABLE"
-# export FLAGS="$FLAGS -DAVR_DMXOUT_PIN=18"
-# export FLAGS="$FLAGS -DLAN_INIT_DELAY=2000"
-# export FLAGS="$FLAGS -DCONTROLLINO"
-# export FLAGS="$FLAGS -DESP_WIFI_AP=MYAP"
-# export FLAGS="$FLAGS -DESP_WIFI_PWD=MYPWD"
-# export FLAGS="$FLAGS -DWIFI_MANAGER_DISABLE"
-# export FLAGS="$FLAGS -DRESET_PIN=5"
-# export FLAGS="$FLAGS -DDHCP_RETRY_INTERVAL=60000"
-# export FLAGS="$FLAGS -DRESTART_LAN_ON_MQTT_ERRORS"
-# export FLAGS="$FLAGS -DW5500_CS_PIN=53"
-# export FLAGS="$FLAGS -DSYSLOG_ENABLE"
-# export FLAGS="$FLAGS -DDEVICE_NAME=MYDEVICE"
-# export FLAGS="$FLAGS -DDHT_DISABLE"
-# export FLAGS="$FLAGS -DCOUNTER_DISABLE"
-# export FLAGS="$FLAGS -DWITH_PRINTEX_LIB"
-# export FLAGS="$FLAGS -DPIO_SRC_REV="$(git log --pretty=format:%h_%ad -1 --date=short)
-# export FLAGS="$FLAGS -DCSSHDC_DISABLE"
- echo $FLAGS

get_build_flags.py

@@ -0,0 +1,31 @@
+# -*- coding: utf-8 -*-
+from __future__ import print_function
+import os
+import sys
+print(sys.argv[1:], file=sys.stderr)
+#print("build_flags_"+sys.argv[1:][0])
+try:
+    file = open("build-flags/build_flags_"+sys.argv[1:][0])
+except IOError as e:
+    print(u'No build flags file ', file=sys.stderr)
+else:
+    with file:
+           for line in file.readlines():
+               if not line.startswith('#'):
+                    print (line)
+           file.close()
+
+try:
+    file = open("custom-build-flags/build_flags_"+sys.argv[1:][0])
+except IOError as e:
+    print(u'No custom build flags file ', file=sys.stderr)
+else:
+    with file:
+           for line in file.readlines():
+               if not line.startswith('#'):
+                    print (line)
+           file.close()
+
+sys.stdout.write("-DPIO_SRC_REV=")
+sys.stdout.flush()
+os.system("git log --pretty=format:%h_%ad -1 --date=short")

lighthub/abstractch.cpp

@@ -0,0 +1,42 @@
+
+#include "abstractch.h"
+#include <PubSubClient.h>
+#include "utils.h"
+#include <aJSON.h>
+#include "main.h"
+
+extern lan_status lanStatus;
+extern PubSubClient mqttClient;
+extern int8_t ethernetIdleCount;
+
+int abstractCh::publishTopic(const char* topic, long value, const char* subtopic)
+{
+  char valstr[16];
+  printUlongValueToStr(valstr, value);
+  return publishTopic(topic, valstr,subtopic);
+};
+
+int abstractCh::publishTopic(const char* topic, float value, const char* subtopic)
+{
+  char valstr[16];
+  printFloatValueToStr(value, valstr);
+  return publishTopic(topic, valstr,subtopic);
+};
+
+int abstractCh::publishTopic(const char* topic, const char * value, const char* subtopic)
+{
+  char addrstr[MQTT_TOPIC_LENGTH];
+ if (!isNotRetainingStatus()) return 0;
+    if (topic)
+     {
+       strncpy(addrstr,topic,sizeof(addrstr));
+       if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,topic);
+       strncat(addrstr,subtopic,sizeof(addrstr));
+       if (mqttClient.connected() && lanStatus == OPERATION  && !ethernetIdleCount)
+                       {
+                        mqttClient.publish(addrstr, value, true);
+                        return 1;
+                      }
+     }
+return 0;
+};

lighthub/abstractch.h

@@ -0,0 +1,24 @@
+#pragma once
+#include "Arduino.h"
+
+#define CST_UNKNOWN  0
+#define CST_INITIALIZED  1
+#define CST_FAILED 2
+
+class abstractCh {
+public:
+    abstractCh(){};
+    virtual ~abstractCh(){};
+    virtual int Poll(short cause) = 0;
+    virtual int Setup() =0;        //Should initialize hardware and reserve resources
+    virtual int Anounce () {return 0;};
+    virtual int Stop() {return 0;};         //Should free resources
+    virtual int Status() {return CST_UNKNOWN;}
+
+
+protected:
+virtual int publishTopic(const char* topic, long value, const char* subtopic = NULL);
+virtual int publishTopic(const char* topic, float value, const char* subtopic = NULL );
+virtual int publishTopic(const char* topic, const char * value, const char* subtopic = NULL);
+//friend Input;
+};

lighthub/abstractin.cpp

@@ -1,5 +1,6 @@
 
 #include "abstractin.h"
+#include "abstractch.h"
 #include <PubSubClient.h>
 #include "utils.h"
 #include <aJSON.h>
@@ -9,36 +10,28 @@
 extern lan_status lanStatus;
 extern PubSubClient mqttClient;
 
-int abstractIn::publish(long value, char* subtopic)
+int abstractIn::publish(long value, const char* subtopic)
 {
   char valstr[16];
   printUlongValueToStr(valstr, value);
   return publish(valstr,subtopic);
 };
 
-int abstractIn::publish(float value, char* subtopic)
+int abstractIn::publish(float value, const  char* subtopic)
 {
   char valstr[16];
   printFloatValueToStr(value, valstr);
   return publish(valstr,subtopic);
 };
 
-int abstractIn::publish(char * value, char* subtopic)
+int abstractIn::publish(char * value, const char* subtopic)
 {
-  char addrstr[MQTT_TOPIC_LENGTH];
   if (in)
   {
   aJsonObject *emit = aJson.getObjectItem(in->inputObj, "emit");
-    if (emit)
+    if (emit && emit->type == aJson_String)
      {
-       strncpy(addrstr,emit->valuestring,sizeof(addrstr));
+       return publishTopic(emit->valuestring,value,subtopic);
-       if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
-       strncat(addrstr,subtopic,sizeof(addrstr));
-       if (mqttClient.connected() && lanStatus == OPERATION)
-                       {
-                        mqttClient.publish(addrstr, value, true);
-                        return 1;
-                      }
      }
   }
 return 0;

lighthub/abstractin.h

@@ -1,17 +1,16 @@
 #pragma once
 #include "Arduino.h"
+#include "abstractch.h"
 
 class Input;
-class abstractIn {
+class abstractIn : public abstractCh{
 public:
-    abstractIn(Input * _in){in=_in;};
+    abstractIn(Input * _in):abstractCh(){in=_in;};
-    virtual int Setup(int addr) = 0;
-    virtual int Poll() = 0;
 
 protected:
    Input * in;
-int publish(long value, char* subtopic = NULL);
+int publish(long value, const char* subtopic = NULL);
-int publish(float value, char* subtopic = NULL );
+int publish(float value, const char* subtopic = NULL );
-int publish(char * value, char* subtopic = NULL);
+int publish(char * value, const char* subtopic = NULL);
 friend Input;
 };

lighthub/abstractout.h

@@ -0,0 +1,16 @@
+#pragma once
+#include "Arduino.h"
+#include "abstractch.h"
+
+class Item;
+class chPersistent {};
+class abstractOut  : public abstractCh{
+public:
+    abstractOut(Item * _item):abstractCh(){item=_item;};
+    virtual int Ctrl(short cmd, short n=0, int * Parameters=NULL, int suffixCode=0, char* subItem=NULL) =0;
+    virtual int isActive(){return 0;};
+    virtual int getDefaultOnVal(){return 100;};
+    virtual int getChanType(){return 0;}
+protected:
+      Item * item;
+};

lighthub/bright.cpp

@@ -0,0 +1,23 @@
+#include "bright.h"
+
+uint8_t getBright(uint8_t percent)
+{
+ int index = map(percent,0,100,0,255);
+ if (index>255) index=255;
+ return getBright255(index);
+}
+
+uint8_t getBright255(uint8_t percent)
+{
+  #ifdef BRIGHT_LINEAR
+    return percent;
+  #else
+  int val = stepvar[index];
+  if (val>255) val=255;
+  Serial.print(F("Bright:"));
+  Serial.print(percent);
+  Serial.print(F("->"));
+  Serial.println(val);
+  return val;
+  #endif
+}

lighthub/bright.h

@@ -0,0 +1,105 @@
+#pragma once
+#include <Arduino.h>
+#define BRIGHT_LINEAR
+
+
+#ifdef BRIGHT_LOG
+const  uint8_t stepvar[] PROGMEM =
+        {
+         0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+      //   0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+         0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+         0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+         0x01, 0x02, 0x02, 0x02, 0x02, 0x02,
+         0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+         0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+         0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+         0x02, 0x03, 0x03, 0x03, 0x03, 0x03,
+         0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
+         0x03, 0x03, 0x03, 0x03, 0x04, 0x04,
+         0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
+         0x04, 0x04, 0x04, 0x04, 0x05, 0x05,
+         0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
+         0x05, 0x06, 0x06, 0x06, 0x06, 0x06,
+         0x06, 0x06, 0x06, 0x07, 0x07, 0x07,
+         0x07, 0x07, 0x07, 0x08, 0x08, 0x08,
+         0x08, 0x08, 0x08, 0x09, 0x09, 0x09,
+         0x09, 0x09, 0x0A, 0x0A, 0x0A, 0x0A,
+         0x0A, 0x0B, 0x0B, 0x0B, 0x0B, 0x0C,
+         0x0C, 0x0C, 0x0C, 0x0D, 0x0D, 0x0D,
+         0x0E, 0x0E, 0x0E, 0x0E, 0x0F, 0x0F,
+         0x0F, 0x10, 0x10, 0x10, 0x11, 0x11,
+         0x12, 0x12, 0x12, 0x13, 0x13, 0x14,
+         0x14, 0x14, 0x15, 0x15, 0x16, 0x16,
+         0x17, 0x17, 0x18, 0x18, 0x19, 0x19,
+         0x1A, 0x1B, 0x1B, 0x1C, 0x1C, 0x1D,
+         0x1E, 0x1E, 0x1F, 0x20, 0x20, 0x21,
+         0x22, 0x23, 0x23, 0x24, 0x25, 0x26,
+         0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B,
+         0x2C, 0x2D, 0x2E, 0x2F, 0x30, 0x31,
+         0x32, 0x33, 0x34, 0x35, 0x37, 0x38,
+         0x39, 0x3A, 0x3B, 0x3D, 0x3E, 0x3F,
+         0x41, 0x42, 0x44, 0x45, 0x47, 0x48,
+         0x4A, 0x4C, 0x4D, 0x4F, 0x51, 0x52,
+         0x54, 0x56, 0x58, 0x5A, 0x5C, 0x5E,
+         0x60, 0x62, 0x64, 0x66, 0x69, 0x6B,
+         0x6D, 0x70, 0x72, 0x75, 0x77, 0x7A,
+         0x7C, 0x7F, 0x82, 0x85, 0x88, 0x8B,
+         0x8E, 0x91, 0x94, 0x97, 0x9B, 0x9E,
+         0xA2, 0xA5, 0xA9, 0xAC, 0xB0, 0xB4,
+         0xB8, 0xBC, 0xC0, 0xC4, 0xC9, 0xCD,
+         0xD2, 0xD6, 0xDB, 0xE0, 0xE5, 0xEA,
+         0xEF, 0xF4, 0xF9, 0xFF};
+
+#endif
+
+
+#ifdef BRIGHT_STEP
+const  uint8_t stepvar[] PROGMEM =
+        {0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+         0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+         0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+         0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+         0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+         0x00, 0x00, 0x00, 0x01, 0x01, 0x01,
+         0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+         0x01, 0x01, 0x01, 0x01, 0x01, 0x02,
+         0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+         0x02, 0x02, 0x03, 0x03, 0x03, 0x03,
+         0x03, 0x03, 0x04, 0x04, 0x04, 0x04,
+         0x04, 0x04, 0x05, 0x05, 0x05, 0x05,
+         0x06, 0x06, 0x06, 0x06, 0x07, 0x07,
+         0x07, 0x07, 0x08, 0x08, 0x08, 0x08,
+         0x09, 0x09, 0x09, 0x0A, 0x0A, 0x0A,
+         0x0B, 0x0B, 0x0C, 0x0C, 0x0C, 0x0D,
+         0x0D, 0x0E, 0x0E, 0x0E, 0x0F, 0x0F,
+         0x10, 0x10, 0x11, 0x11, 0x12, 0x12,
+         0x13, 0x13, 0x14, 0x14, 0x15, 0x16,
+         0x16, 0x17, 0x17, 0x18, 0x19, 0x19,
+         0x1A, 0x1B, 0x1B, 0x1C, 0x1D, 0x1D,
+         0x1E, 0x1F, 0x20, 0x20, 0x21, 0x22,
+         0x23, 0x23, 0x24, 0x25, 0x26, 0x27,
+         0x28, 0x29, 0x29, 0x2A, 0x2B, 0x2C,
+         0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32,
+         0x33, 0x34, 0x35, 0x36, 0x37, 0x38,
+         0x39, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F,
+         0x40, 0x42, 0x43, 0x44, 0x45, 0x47,
+         0x48, 0x49, 0x4B, 0x4C, 0x4D, 0x4F,
+         0x50, 0x51, 0x53, 0x54, 0x56, 0x57,
+         0x59, 0x5A, 0x5C, 0x5D, 0x5F, 0x60,
+         0x62, 0x64, 0x65, 0x67, 0x68, 0x6A,
+         0x6C, 0x6E, 0x6F, 0x71, 0x73, 0x75,
+         0x76, 0x78, 0x7A, 0x7C, 0x7E, 0x80,
+         0x82, 0x84, 0x85, 0x87, 0x89, 0x8B,
+         0x8E, 0x90, 0x92, 0x94, 0x96, 0x98,
+         0x9A, 0x9C, 0x9E, 0xA1, 0xA3, 0xA5,
+         0xA7, 0xAA, 0xAC, 0xAE, 0xB1, 0xB3,
+         0xB6, 0xB8, 0xBA, 0xBD, 0xBF, 0xC2,
+         0xC4, 0xC7, 0xCA, 0xCC, 0xCF, 0xD1,
+         0xD4, 0xD7, 0xD9, 0xDC, 0xDF, 0xE2,
+         0xE5, 0xE7, 0xEA, 0xED, 0xF0, 0xF3,
+         0xF6, 0xF9, 0xFC, 0xFF};
+#endif
+
+uint8_t getBright(uint8_t percent);
+uint8_t getBright255(uint8_t percent);

lighthub/dmx.cpp

@@ -21,6 +21,7 @@ e-mail    anklimov@gmail.com
 //#include <DmxSimple.h>
 //#include <DMXSerial.h>
 #include "options.h"
+#include "item.h"
 
 #ifdef _dmxin
 #if defined(ARDUINO_ARCH_AVR)
@@ -35,6 +36,13 @@ DMXESPSerial dmxout;
 #endif
 
 uint8_t * DMXin = NULL;
+
+#ifdef DMX_SMOOTH
+uint8_t * DMXinterimBuf = NULL;
+uint16_t DMXOUT_Channels=0;
+uint32_t checkTimestamp=0L;
+#endif
+
 int D_State=0;
 
 unsigned long D_checkT=0;
@@ -61,16 +69,16 @@ int itemCtrl2(char* name,int r,int g, int b, int w)
         short itemaddr = aJson.getArrayItem(itemArr,1)->valueint;
        switch (itemtype){
 #ifdef _dmxout
-       case 0: //Dimmed light
+       case CH_DIMMER: //Dimmed light
 
        DmxWrite(itemaddr, w);
        break;
 
 
-       case 1: //Colour RGBW
+       case CH_RGBW: //Colour RGBW
         DmxWrite(itemaddr+3, w);
 
-       case 2: // RGB
+       case CH_RGB: // RGB
       {
 
         DmxWrite(itemaddr,   r);
@@ -79,13 +87,13 @@ int itemCtrl2(char* name,int r,int g, int b, int w)
 
          break; }
 #endif
-        case 7: //Group
+        case CH_GROUP: //Group
         aJsonObject *groupArr= aJson.getArrayItem(itemArr, 1);
         if (groupArr && (groupArr->type==aJson_Array))
         { aJsonObject *i =groupArr->child;
           while (i)
             { //Serial.println(i->valuestring);
-            itemCtrl2(i->valuestring,r,g,b,w);
+            if (i->type == aJson_String) itemCtrl2(i->valuestring,r,g,b,w);
               i=i->next;}
         }
        } //itemtype
@@ -100,7 +108,9 @@ void DMXImmediateUpdate(short tch,short r, short g, short b, short w) {
        if (dmxArr && (dmxArr->type==aJson_Array))
 
         {
-        char* itemname = aJson.getArrayItem(dmxArr,tch)->valuestring;
+        aJsonObject *DMXch =   aJson.getArrayItem(dmxArr,tch);
+        char* itemname = NULL;
+        if (DMXch->type == aJson_String) itemname=DMXch->valuestring;
         if (itemname) itemCtrl2(itemname,r,g,b,w);
         }
 }
@@ -112,7 +122,6 @@ void DMXSemiImmediateUpdate(short tch,short trh, int val)
 
 void DMXput(void)
 {
-int t;
 for (short tch=0; tch<=3 ; tch++)
     {
     short base = tch*4;
@@ -160,6 +169,7 @@ for (short tch=0; tch<=3 ; tch++)
 {
 //  CHSV hsv;
 //  CRGB rgb;
+DMXOUT_propagate();
 #if defined(_dmxin)
 
 short t,tch;
@@ -191,7 +201,7 @@ for (int i=1; i<17; i++) {Serial.print(dmxin.read(i));Serial.print(";");}
 void onDmxFrame(uint16_t universe, uint16_t length, uint8_t sequence, uint8_t* data, IPAddress remoteIP)
 {
 #ifdef _dmxout
-  for (int i = 0 ; i < length && i<MAX_CHANNELS ; i++)
+  for (unsigned int i = 0 ; i < length && i<MAX_CHANNELS ; i++)
   {
     DmxWrite(i+1,data[i]);
   }
@@ -249,6 +259,39 @@ dmxout.setTxMaxChannels(channels);
 #ifndef DMX_DISABLE
 for (int i=1;i<=channels;i++) DmxWrite(i,0);
 #endif
+
+#ifdef DMX_SMOOTH
+if (DMXinterimBuf) delete DMXinterimBuf;
+DMXinterimBuf = new uint8_t [channels+1];
+DMXOUT_Channels=channels;
+for (int i=1;i<=channels;i++) DMXinterimBuf[i]=0;
+#endif
+}
+
+void DMXOUT_propagate()
+{
+  #ifdef DMX_SMOOTH
+  uint32_t now = millis();
+  if (now<checkTimestamp) return;
+
+  for(int i=1;i<=DMXOUT_Channels;i++)
+  {
+  uint8_t currLevel=dmxout.getTx(i);
+  int32_t delta = currLevel-DMXinterimBuf[i-1];
+  if (delta)
+        {
+        uint16_t step  = abs(delta) >> 4;
+        if (!step) step=1;
+
+        if (delta<0)
+                        {DmxWrite2(i,currLevel+step);}
+
+        if (delta>0)
+                        {DmxWrite2(i,currLevel-step);}
+        }
+  }
+  checkTimestamp=now+DMX_SMOOTH_DELAY;
+  #endif
 }
 
 void ArtnetSetup()
@@ -259,3 +302,12 @@ void ArtnetSetup()
   if (artnet) artnet->setArtDmxCallback(onDmxFrame);
 #endif
 }
+
+
+void DmxWriteBuf(uint16_t chan,uint8_t val)
+{
+#ifdef DMX_SMOOTH
+if (chan && chan<=DMXOUT_Channels)
+          DMXinterimBuf[chan-1] = val;
+#endif
+}

lighthub/dmx.h

@@ -32,6 +32,35 @@ e-mail    anklimov@gmail.com
 
 #if defined(_dmxout)
 
+#if defined DMX_SMOOTH
+
+#if defined(ARDUINO_ARCH_AVR)
+#include <DmxSimple.h>
+#define DmxWrite DmxSimple.write
+//#define DmxWrite  DmxWriteBuf
+#endif
+
+#if defined(ESP8266)
+#include <ESPDMX.h>
+extern DMXESPSerial dmxout;
+#define DmxWrite dmxout.write
+//#define DmxWrite  DmxWriteBuf
+#endif
+
+#if defined(ARDUINO_ARCH_ESP32)
+#include <ESPDMX.h>
+extern DMXESPSerial dmxout;
+#define DmxWrite dmxout.write
+//#define DmxWrite  DmxWriteBuf
+#endif
+
+#if defined(__SAM3X8E__)
+#include <DmxDue.h>
+#define DmxWrite2 dmxout.write
+#define DmxWrite  DmxWriteBuf
+#endif
+
+#else
 #if defined(ARDUINO_ARCH_AVR)
 #include <DmxSimple.h>
 #define DmxWrite DmxSimple.write
@@ -52,6 +81,8 @@ extern DMXESPSerial dmxout;
 #if defined(__SAM3X8E__)
 #include <DmxDue.h>
 #define DmxWrite dmxout.write
+#endif
+
 #endif
 #endif
 
@@ -78,3 +109,5 @@ void ArtnetSetup();
 void DMXCheck(void);
 int itemCtrl2(char* name,int r,int g, int b, int w);
 void ArtnetSetup();
+void DmxWriteBuf(uint16_t chan,uint8_t val);
+void DMXOUT_propagate();

lighthub/homiedef.h

@@ -1,38 +0,0 @@
-#pragma once
-
-const char state_P[] PROGMEM = "$state";
-const char disconnected_P[] PROGMEM = "disconnected";
-const char ready_P[] PROGMEM = "ready";
-
-const char homie_P[] PROGMEM = "$homie";
-const char homiever_P[] PROGMEM = "2.1.0";
-
-const char name_P[] PROGMEM = "$name";
-const char nameval_P[] PROGMEM = "LightHub ";
-
-const char nodes_P[] PROGMEM = "$nodes";
-const char localip_P[] PROGMEM = "$localip";
-const char mac_P[] PROGMEM = "$mac";
-const char fwname_P[] PROGMEM = "$fw/name";
-const char fwversion_P[] PROGMEM = "$fw/version";
-const char implementation_P[] PROGMEM =  "$implementation";
-const char interval_P[] PROGMEM =  "$stats/interval";
-const char color_P[] PROGMEM = "color";
-
-const char datatype_P[] PROGMEM = "$datatype";
-
-const char float_P[] PROGMEM = "float";
-const char hsv_P[]   PROGMEM = "hsv";
-const char int_P[]   PROGMEM = "integer";
-const char enum_P[]   PROGMEM = "enum";
-const char format_P[] PROGMEM = "$format";
-const char true_P[]  PROGMEM = "true";
-const char false_P[] PROGMEM = "false";
-
-const char enumformat_P[]  PROGMEM = "ON,OFF,HALT,REST,XON,XOFF,TOGGLE";
-const char intformat_P[]   PROGMEM = "0-100";
-
-const char stats_P[]     PROGMEM = "$stats";
-const char statsval_P[]  PROGMEM = "uptime,freeheap";
-const char uptime_P[]    PROGMEM = "uptime";
-const char freeheap_P[]  PROGMEM = "freeheap";

lighthub/inputs.cpp

@@ -22,6 +22,7 @@ e-mail    anklimov@gmail.com
 #include "item.h"
 #include "utils.h"
 #include <PubSubClient.h>
+#include "main.h"
 
 #ifndef DHT_DISABLE
 #if defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_ESP32)
@@ -31,9 +32,15 @@ e-mail    anklimov@gmail.com
 #endif
 #endif
 
+#ifdef MCP23017
+#include "Adafruit_MCP23017.h"
+Adafruit_MCP23017 mcp;
+#endif
+
 extern PubSubClient mqttClient;
 extern aJsonObject *root;
 extern int8_t ethernetIdleCount;
+extern int8_t configLocked;
 
 #if !defined(DHT_DISABLE) || !defined(COUNTER_DISABLE)
 static volatile unsigned long nextPollMillisValue[5];
@@ -60,6 +67,7 @@ static short counter_irq_map[54];
 #endif
 #endif
 
+readCache inCache;
 
 Input::Input(char * name) //Constructor
 {
@@ -71,66 +79,148 @@ Input::Input(char * name) //Constructor
 }
 
 
-Input::Input(int pin)
+ Input::Input(aJsonObject * obj, aJsonObject * parent)
-{
- // TODO
-}
-
-
- Input::Input(aJsonObject * obj)
 {
   inputObj= obj;
-  Parse();
+  Parse(parent);
-
 }
 
 
 boolean Input::isValid ()
 {
- return  (pin && store);
+ return  (store);
 }
 
-void Input::Parse()
+
+void Input::Parse(aJsonObject * configObj)
 {
+    aJsonObject *itemBuffer;
     store = NULL;
     inType = 0;
     pin = 0;
-    if (inputObj && (inputObj->type == aJson_Object) && root) {
+
-        aJsonObject *itemBuffer;
+    if (!inputObj || !root) return;
-        itemBuffer = aJson.getObjectItem(inputObj, "T");
+    if (!configObj) configObj = inputObj;
+
+    if (configObj->type == aJson_Object)
+        {
+        // Retreive type and pin#
+        itemBuffer = aJson.getObjectItem(configObj, "T");
         if (itemBuffer) inType = static_cast<uint8_t>(itemBuffer->valueint);
-        pin = static_cast<uint8_t>(atoi(inputObj->name));
+
+        itemBuffer = aJson.getObjectItem(configObj, "#");
+        if (itemBuffer) pin = static_cast<uint8_t>(itemBuffer->valueint);
+           else pin = static_cast<uint8_t>(atoi(configObj->name));
+        }
+
+        // Persistant storage
         itemBuffer = aJson.getObjectItem(inputObj, "S");
         if (!itemBuffer) {
             debugSerial<<F("In: ")<<pin<<F("/")<<inType<<endl;
-            aJson.addNumberToObject(inputObj, "S", 0);
+            aJson.addNumberToObject(inputObj, "S", (long int) 0);
             itemBuffer = aJson.getObjectItem(inputObj, "S");
         }
         if (itemBuffer) store = (inStore *) &itemBuffer->valueint;
+
+}
+
+void cleanStore(aJsonObject * input)
+{
+if (input->type == aJson_Object)  {
+    // Check for nested inputs
+    aJsonObject * inputArray = aJson.getObjectItem(input, "act");
+    if  (inputArray && (inputArray->type == aJson_Array))
+        {
+          aJsonObject *inputObj = inputArray->child;
+
+          while(inputObj)
+            {
+              Input in(inputObj,input);
+              in.store->aslong = 0;
+
+              yield();
+              inputObj = inputObj->next;
+            }
+        }
+    else
+    {
+     Input in(input);
+     in.Poll(CHECK_INPUT);
     }
 }
+}
 
 void Input::setup()
 {
 if (!isValid() || (!root)) return;
+cleanStore(inputObj);
 
-#ifndef CSSHDC_DISABLE
+store->aslong=0;
-    if (inType == IN_CCS811)
+uint8_t inputPinMode = INPUT; //if IN_ACTIVE_HIGH
-      {
+switch (inType)
-        in_ccs811  ccs811(this);
+{
-        ccs811.Setup(pin);
+  case IN_PUSH_ON:
-      }
+  case IN_PUSH_TOGGLE :
-    else if (inType == IN_HDC1080)
+  inputPinMode = INPUT_PULLUP;
-      {
+
-        in_hdc1080 hdc1080(this);
+  case IN_PUSH_ON     | IN_ACTIVE_HIGH:
-        hdc1080.Setup(pin);
+  case IN_PUSH_TOGGLE | IN_ACTIVE_HIGH:
-       }
+  pinMode(pin, inputPinMode);
-// TODO rest types setup
+
-#endif
+  store->state=IS_IDLE;
+  break;
+
+  #ifdef MCP23017
+
+  case IN_I2C | IN_PUSH_ON:
+  case IN_I2C | IN_PUSH_TOGGLE :
+
+  inputPinMode = INPUT_PULLUP;
+
+  case IN_I2C | IN_PUSH_ON     | IN_ACTIVE_HIGH:
+  case IN_I2C | IN_PUSH_TOGGLE | IN_ACTIVE_HIGH:
+
+  mcp.begin(); //TBD - multiple chip
+  mcp.pinMode(pin, INPUT);
+  if (inputPinMode == INPUT_PULLUP) mcp.pullUp(0, HIGH);  // turn on a 100K pullup internally
+
+  store->state=IS_IDLE;
+  break;
+  #endif
+
+  case IN_ANALOG:
+  inputPinMode = INPUT_PULLUP;
+
+  case IN_ANALOG | IN_ACTIVE_HIGH:
+  pinMode(pin, inputPinMode);
+  break;
+
+  case IN_DHT22:
+  case IN_COUNTER:
+  case IN_UPTIME:
+  break;
+
+  #ifndef CSSHDC_DISABLE
+  case IN_CCS811:
+  {
+    in_ccs811  ccs811(this);
+    ccs811.Setup();
+  }
+  break;
+
+  case IN_HDC1080:
+  {
+    in_hdc1080 hdc1080(this);
+    hdc1080.Setup();
+   }
+  break;
+  #endif
+
+} //switch
 
 }
 
-int Input::poll(short cause) {
+int Input::Poll(short cause) {
 
 if (!isValid()) return -1;
 #ifndef CSSHDC_DISABLE
@@ -140,17 +230,22 @@ if (!isValid()) return -1;
 
 switch (cause)  {
   case CHECK_INPUT:  //Fast polling
+  case CHECK_INTERRUPT: //Realtime polling
     switch (inType)
     {
       case IN_PUSH_ON:
       case IN_PUSH_ON     | IN_ACTIVE_HIGH:
       case IN_PUSH_TOGGLE :
       case IN_PUSH_TOGGLE | IN_ACTIVE_HIGH:
-      contactPoll();
+      case IN_I2C | IN_PUSH_ON:
+      case IN_I2C | IN_PUSH_ON     | IN_ACTIVE_HIGH:
+      case IN_I2C | IN_PUSH_TOGGLE :
+      case IN_I2C | IN_PUSH_TOGGLE | IN_ACTIVE_HIGH:
+      contactPoll(cause);
       break;
       case IN_ANALOG:
       case IN_ANALOG | IN_ACTIVE_HIGH:
-      analogPoll();
+      analogPoll(cause);
       break;
 
       // No fast polling
@@ -167,10 +262,10 @@ switch (cause)  {
     {
     #ifndef CSSHDC_DISABLE
          case IN_CCS811:
-         _ccs811.Poll();
+         _ccs811.Poll(POLLING_SLOW);
          break;
          case IN_HDC1080:
-         _hdc1080.Poll();
+         _hdc1080.Poll(POLLING_SLOW);
          break;
     #endif
     #ifndef DHT_DISABLE
@@ -188,6 +283,7 @@ switch (cause)  {
     #endif
      }
   }
+  return 0;
 }
 
 #ifndef COUNTER_DISABLE
@@ -221,16 +317,16 @@ void Input::counterPoll() {
     debugSerial<<F("IN:")<<(pin)<<F(" Counter type. val=")<<counterValue;
 
     aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
-    if (emit) {
+    if (emit && emit->type == aJson_String) {
         char valstr[10];
         char addrstr[MQTT_TOPIC_LENGTH];
         strncpy(addrstr,emit->valuestring,sizeof(addrstr));
         if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
-        sprintf(valstr, "%d", counterValue);
+        sprintf(valstr, "%ld", counterValue);
         if (mqttClient.connected() && !ethernetIdleCount)
             mqttClient.publish(addrstr, valstr);
         setNextPollTime(millis() + DHT_POLL_DELAY_DEFAULT);
-        debugSerial<<F(" NextPollMillis=")<<nextPollTime();
+      //  debugSerial<<F(" NextPollMillis=")<<nextPollTime();
     }
     else
         debugSerial<<F(" No emit data!");
@@ -280,7 +376,7 @@ void Input::uptimePoll() {
     if (nextPollTime() > millis())
         return;
     aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
-    if (emit) {
+    if (emit && emit->type == aJson_String) {
 #ifdef WITH_DOMOTICZ
         if(getIdxField()){
                 publishDataToDomoticz(DHT_POLL_DELAY_DEFAULT, emit, "{\"idx\":%s,\"svalue\":\"%d\"}", getIdxField(), millis());
@@ -375,9 +471,9 @@ void Input::dht22Poll() {
 #endif
     aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
     aJsonObject *item = aJson.getObjectItem(inputObj, "item");
-    if (item) thermoSetCurTemp(item->valuestring, temp);
+    if (item && item->type == aJson_String) thermoSetCurTemp(item->valuestring, temp);
     debugSerial << F("IN:") << pin << F(" DHT22 type. T=") << temp << F("°C H=") << humidity << F("%")<<endl;
-    if (emit && temp && humidity && temp == temp && humidity == humidity) {
+    if (emit && emit->type == aJson_String && temp && humidity && temp == temp && humidity == humidity) {
         char addrstr[MQTT_TOPIC_LENGTH] = "";
 #ifdef WITH_DOMOTICZ
         if(getIdxField()){
@@ -399,97 +495,457 @@ void Input::dht22Poll() {
             mqttClient.publish(addrstr, valstr);
 
         setNextPollTime(millis() + DHT_POLL_DELAY_DEFAULT);
-        debugSerial << F(" NextPollMillis=") << nextPollTime() << endl;
+  //      debugSerial << F(" NextPollMillis=") << nextPollTime() << endl;
     } else
         setNextPollTime(millis() + DHT_POLL_DELAY_DEFAULT / 3);
 }
 #endif
-
-void Input::contactPoll() {
-    boolean currentInputState;
 /*
-#if defined(ARDUINO_ARCH_STM32)
+bool Input::executeCommand(aJsonObject* cmd, int8_t toggle, char* defCmd)
-     WiringPinMode inputPinMode;
+{
-#endif
+  if (!cmd) return false;
 
-#if defined(__SAM3X8E__)||defined(ARDUINO_ARCH_AVR)||defined(ARDUINO_ARCH_ESP8266)||defined(ARDUINO_ARCH_ESP32)
+  switch (cmd->type)
-
+  {
-#endif
+    case aJson_String: //legacy - no action
-*/
+    break;
-     uint32_t inputPinMode;
+    case aJson_Array:  //array - recursive iterate
-     uint8_t inputOnLevel;
+    {
-    if (inType & IN_ACTIVE_HIGH) {
+    configLocked++;
-        inputOnLevel = HIGH;
+    aJsonObject * command = cmd->child;
-        inputPinMode = INPUT;
+    while (command)
-    } else {
+            {
-        inputOnLevel = LOW;
+            executeCommand(command,toggle,defCmd);
-        inputPinMode = INPUT_PULLUP;
+            command = command->next;
+            }
+    configLocked--;
     }
-    pinMode(pin, inputPinMode);
+    break;
-    currentInputState = (digitalRead(pin) == inputOnLevel);
+    case aJson_Object:
-    if (currentInputState != store->currentValue) // value changed
+  {
+  aJsonObject *item = aJson.getObjectItem(cmd, "item");
+  aJsonObject *icmd = aJson.getObjectItem(cmd, "icmd");
+  aJsonObject *irev = aJson.getObjectItem(cmd, "irev");
+  aJsonObject *ecmd = aJson.getObjectItem(cmd, "ecmd");
+  aJsonObject *erev = aJson.getObjectItem(cmd, "erev");
+  aJsonObject *emit = aJson.getObjectItem(cmd, "emit");
+
+  char * itemCommand;
+  if (irev && toggle && irev->type == aJson_String) itemCommand = irev->valuestring;
+  else if(icmd && icmd->type == aJson_String) itemCommand = icmd->valuestring;
+    else    itemCommand = defCmd;
+
+  char * emitCommand;
+  if (erev && toggle && erev->type == aJson_String) emitCommand = erev->valuestring;
+  else if(ecmd && ecmd->type == aJson_String) emitCommand = ecmd->valuestring;
+    else    emitCommand = defCmd;
+
+  debugSerial << F("IN:") << (pin) << F(" : ") <<endl;
+if (item) debugSerial << item->valuestring<< F(" -> ")<<itemCommand<<endl;
+if (emit) debugSerial << emit->valuestring<< F(" -> ")<<emitCommand<<endl;
+
+
+
+
+  if (emit && emitCommand && emit->type == aJson_String) {
+
+// *
+TODO implement
+#ifdef WITH_DOMOTICZ
+      if (getIdxField())
+      {  (newValue) ? publishDataToDomoticz(0, emit, "{\"command\":\"switchlight\",\"idx\":%s,\"switchcmd\":\"On\"}",
+          : publishDataToDomoticz(0,emit,"{\"command\":\"switchlight\",\"idx\":%s,\"switchcmd\":\"Off\"}",getIdxField());	                                               getIdxField())
+                     : publishDataToDomoticz(0, emit,
+                                             "{\"command\":\"switchlight\",\"idx\":%s,\"switchcmd\":\"Off\"}",
+                                             getIdxField());
+                        } else
+#endif
+* //
+
+{
+char addrstr[MQTT_TOPIC_LENGTH];
+strncpy(addrstr,emit->valuestring,sizeof(addrstr));
+if (mqttClient.connected() && !ethernetIdleCount)
+{
+  if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
+  mqttClient.publish(addrstr, emitCommand , true);
+}
+}
+} // emit
+  if (item && itemCommand && item->type == aJson_String) {
+    //debugSerial <<F("Controlled item:")<< item->valuestring <<endl;
+      Item it(item->valuestring);
+      if (it.isValid()) it.Ctrl(itemCommand, true);
+      }
+return true;
+}
+default:
+return false;
+} //switch type
+return false;
+}
+*/
+
+// TODO Polling via timed interrupt with CHECK_INTERRUPT cause
+bool Input::changeState(uint8_t newState, short cause)
+{
+if (!inputObj ||  !store) return false;
+
+if (newState == IS_REQSTATE)
+  if (store->delayedState && cause != CHECK_INTERRUPT)
+    {
+      // Requested delayed change State and safe moment
+      newState=store->reqState; //Retrieve requested state
+      debugSerial<<F("Pended state retrieved:")<<newState;
+
+    }
+  else return true;   // No pended State
+else if (store->delayedState)
+            return false; //State changing is postponed already (( giving up
+
+aJsonObject *cmd = NULL;
+int8_t toggle=0;
+if (newState!=store->state) debugSerial<<F("#")<<pin<<F(" ")<<store->state<<F("->") <<newState<<endl;
+  switch (newState)
+  {
+    case IS_IDLE:
+        switch (store->state)
+        {
+        case IS_RELEASED:  //click
+        cmd = aJson.getObjectItem(inputObj, "click");
+        toggle=store->toggle1;
+        break;
+        case IS_RELEASED2: //doubleclick
+        cmd = aJson.getObjectItem(inputObj, "dclick");
+        toggle=store->toggle2;
+        break;
+        case IS_PRESSED3:  //tripple click
+        cmd = aJson.getObjectItem(inputObj, "tclick");
+        toggle=store->toggle3;
+        break;
+        case IS_WAITPRESS: //do nothing
+        break;
+        default: //rcmd
+        cmd = aJson.getObjectItem(inputObj, "rcmd");
+          ;
+        }
+        break;
+    case IS_PRESSED: //scmd
+        cmd = aJson.getObjectItem(inputObj, "scmd");
+        toggle=store->toggle1;
+        store->toggle1 = !store->toggle1;
+        break;
+    case IS_PRESSED2: //scmd2
+        cmd = aJson.getObjectItem(inputObj, "scmd2");
+        toggle=store->toggle2;
+        store->toggle2 = !store->toggle2;
+        break;
+    case IS_PRESSED3: //scmd3
+        cmd = aJson.getObjectItem(inputObj, "scmd3");
+        toggle=store->toggle3;
+        store->toggle3 = !store->toggle3;
+        break;
+
+    case IS_RELEASED: //rcmd
+    case IS_WAITPRESS:
+    case IS_RELEASED2:
+        cmd = aJson.getObjectItem(inputObj, "rcmd");
+  //      toggle=state->toggle1;
+
+        break;
+    case IS_LONG: //lcmd
+        cmd = aJson.getObjectItem(inputObj, "lcmd");
+        toggle=store->toggle1;
+        break;
+    case IS_REPEAT: //rpcmd
+        cmd = aJson.getObjectItem(inputObj, "rpcmd");
+        toggle=store->toggle1;
+        break;
+    case IS_LONG2: //lcmd2
+        cmd = aJson.getObjectItem(inputObj, "lcmd2");
+        toggle=store->toggle2;
+        break;
+    case IS_REPEAT2: //rpcmd2
+          cmd = aJson.getObjectItem(inputObj, "rpcmd2");
+        toggle=store->toggle2;
+        break;
+    case IS_LONG3: //lcmd3
+        cmd = aJson.getObjectItem(inputObj, "lcmd3");
+        toggle=store->toggle3;
+        break;
+    case IS_REPEAT3: //rpcmd3
+        cmd = aJson.getObjectItem(inputObj, "rpcmd3");
+        toggle=store->toggle3;
+        break;
+
+  }
+  if (!cmd)
+  {
+  store->state=newState;
+  return true; //nothing to do
+  }
+  if (cause != CHECK_INTERRUPT)
+  {
+    store->state=newState;
+    executeCommand(cmd,toggle);
+    //Executed
+    store->delayedState=false;
+    return true;
+  }
+  else
+  {
+    //Postpone actual execution
+    store->reqState=store->state;
+    store->delayedState=true;
+    return true;
+  }
+
+}
+
+void Input::contactPoll(short cause) {
+    boolean currentInputState;
+    if (!store) return;
+
+    changeState(IS_REQSTATE,cause); //Check for postponed states transitions
+
+
+     uint8_t inputOnLevel;
+     aJsonObject * mapObj;
+    if (inType & IN_ACTIVE_HIGH) inputOnLevel = HIGH;
+                            else inputOnLevel = LOW;
+
+
+#ifdef MCP23017
+if (inType & IN_I2C)
+    currentInputState = (inCache.I2CReadBit(IN_I2C,0,pin) == inputOnLevel);
+else
+#endif
+    if (isAnalogPin(pin) && (mapObj=aJson.getObjectItem(inputObj, "map")) && mapObj->type == aJson_Array)
+      {
+       int value = inCache.analogReadCached(pin);
+       if (value >= aJson.getArrayItem(mapObj, 0)->valueint && value <= aJson.getArrayItem(mapObj, 1)->valueint)
+          currentInputState = true;
+        else  currentInputState = false;
+      }
+    else currentInputState = (digitalRead(pin) == inputOnLevel);
+switch (store->state) //Timer based transitions
+{
+  case IS_PRESSED:
+      if (isTimeOver(store->timestamp16,millis() & 0xFFFF,T_LONG,0xFFFF))
+      {
+      if (!aJson.getObjectItem(inputObj, "lcmd") && !aJson.getObjectItem(inputObj, "rpcmd")) changeState(IS_WAITRELEASE, cause);
+         else changeState(IS_LONG, cause);
+       }
+      break;
+
+  case IS_LONG:
+      if (isTimeOver(store->timestamp16,millis() & 0xFFFF,T_RPT,0xFFFF))
+                        {
+                        changeState(IS_REPEAT, cause);
+                        store->timestamp16 = millis() & 0xFFFF;
+                        }
+      break;
+
+  case IS_REPEAT:
+      if (isTimeOver(store->timestamp16,millis() & 0xFFFF,T_RPT_PULSE,0xFFFF))
+                        {
+                          changeState(IS_REPEAT, cause);
+                          store->timestamp16 = millis() & 0xFFFF;
+                        }
+          break;
+
+  case IS_PRESSED2:
+          if (isTimeOver(store->timestamp16,millis() & 0xFFFF,T_LONG,0xFFFF))
+            {
+              if (!aJson.getObjectItem(inputObj, "lcmd2") && !aJson.getObjectItem(inputObj, "rpcmd2")) changeState(IS_WAITRELEASE, cause);
+              else changeState(IS_LONG2, cause);
+            }
+              break;
+
+  case IS_LONG2:
+          if (isTimeOver(store->timestamp16,millis() & 0xFFFF,T_RPT,0xFFFF))
+                          {
+                            changeState(IS_REPEAT2, cause);
+                            store->timestamp16 = millis() & 0xFFFF;
+                         }
+              break;
+
+  case IS_REPEAT2:
+          if (isTimeOver(store->timestamp16,millis() & 0xFFFF,T_RPT_PULSE,0xFFFF))
+                          {
+                            changeState(IS_REPEAT2, cause);
+                            store->timestamp16 = millis() & 0xFFFF;
+                          }
+          break;
+
+  case IS_PRESSED3:
+          if (isTimeOver(store->timestamp16,millis() & 0xFFFF,T_LONG,0xFFFF))
+          {
+          if (!aJson.getObjectItem(inputObj, "lcmd3") && !aJson.getObjectItem(inputObj, "rpcmd3")) //No longpress handlers
+                {
+                if (aJson.getObjectItem(inputObj, "scmd3")) changeState(IS_WAITRELEASE, cause); //was used
+                   else changeState(IS_PRESSED2, cause); // completely empty trippleClick section - fallback to first click handler
+                 }
+          else changeState(IS_LONG3, cause);
+          }
+          break;
+
+  case IS_LONG3:
+          if (isTimeOver(store->timestamp16,millis() & 0xFFFF,T_RPT,0xFFFF))
+                            {
+                              changeState(IS_REPEAT3, cause);
+                              store->timestamp16 = millis() & 0xFFFF;
+                            }
+          break;
+
+  case IS_REPEAT3:
+          if (isTimeOver(store->timestamp16,millis() & 0xFFFF,T_RPT_PULSE,0xFFFF))
+                            {
+                                changeState(IS_REPEAT3, cause);
+                                store->timestamp16 = millis() & 0xFFFF;
+                            }
+          break;
+
+  case IS_RELEASED:
+  case IS_RELEASED2:
+  case IS_WAITPRESS:
+
+
+      if (isTimeOver(store->timestamp16,millis() & 0xFFFF,T_IDLE,0xFFFF)) changeState(IS_IDLE, cause);
+      break;
+}
+
+    if (currentInputState != store->lastValue) // value changed
     {
         if (store->bounce) store->bounce = store->bounce - 1;
         else //confirmed change
         {
-            if (inType & IN_PUSH_TOGGLE) {
+           store->timestamp16 = millis() & 0xFFFF; //Saving timestamp of changing
+
+            if (inType & IN_PUSH_TOGGLE) { //To refactore
                 if (currentInputState) { //react on leading edge only (change from 0 to 1)
-                    store->logicState = !store->logicState;
+                    //store->logicState = !store->logicState;
-                    onContactChanged(store->logicState);
+                    store->lastValue = currentInputState;
+                    onContactChanged(store->toggle1);
+                }
+            } else
+
+            {
+                onContactChanged(currentInputState); //Legacy input - to remove later
+
+          bool res = true;
+          if (currentInputState)  //Button pressed state transitions
+
+                switch (store->state)
+                {
+                  case IS_IDLE:
+                       res = changeState(IS_PRESSED, cause);
+
+                       break;
+
+                  case IS_RELEASED:
+                  case IS_WAITPRESS:
+                       res = changeState(IS_PRESSED2, cause);
+
+                       break;
+
+                  case IS_RELEASED2:
+
+                       res = changeState(IS_PRESSED3, cause);
+                       break;
+              }
+          else
+          switch (store->state)  //Button released state transitions
+          {
+                case IS_PRESSED:
+
+                res = changeState(IS_RELEASED, cause);
+                break;
+
+                case IS_LONG:
+                case IS_REPEAT:
+                case IS_WAITRELEASE:
+                res = changeState(IS_WAITPRESS, cause);
+                break;
+
+                case IS_PRESSED2:
+                res = changeState(IS_RELEASED2, cause);
+                break;
+
+                case IS_LONG2:
+                case IS_REPEAT2:
+                case IS_LONG3:
+                case IS_REPEAT3:
+                case IS_PRESSED3:
+                res = changeState(IS_IDLE, cause);
+                break;
+        }
+       if (res) { //State changed or postponed
+                //  store->logicState = currentInputState;
+                  store->lastValue = currentInputState;
                 }
-            } else {
-                store->logicState = currentInputState;
-                onContactChanged(currentInputState);
             }
-            store->currentValue = currentInputState;
+    //        store->currentValue = currentInputState;
         }
     } else // no change
         store->bounce = SAME_STATE_ATTEMPTS;
 }
 
 
-void Input::analogPoll() {
+
-    int16_t  mappedInputVal;
+void Input::analogPoll(short cause) {
+    int16_t   inputVal;
+    int32_t   mappedInputVal; // 10x inputVal
     aJsonObject *inputMap = aJson.getObjectItem(inputObj, "map");
-    short Noize = ANALOG_NOIZE;
+    int16_t Noize = ANALOG_NOIZE;
     short simple = 0;
+//    uint32_t inputPinMode;
+    int max=1024*10;
+    int min=0;
 
 /*
-#if defined(ARDUINO_ARCH_STM32)
-     WiringPinMode inputPinMode;
-#endif
-
-
-#if defined(__SAM3X8E__)||defined(ARDUINO_ARCH_AVR)||defined(ARDUINO_ARCH_ESP8266)||defined(ARDUINO_ARCH_ESP32)
-#endif */
-    uint32_t inputPinMode;
     if (inType & IN_ACTIVE_HIGH) {
         inputPinMode = INPUT;
     } else {
         inputPinMode = INPUT_PULLUP;
     }
+
     pinMode(pin, inputPinMode);
-    mappedInputVal = analogRead(pin);
+*/
+    inputVal = inCache.analogReadCached(pin);
     // Mapping
     if (inputMap && inputMap->type == aJson_Array)
      {
-     int max=1024;
+
      if (aJson.getArraySize(inputMap)>=4)
-        mappedInputVal  = map (mappedInputVal,
+        mappedInputVal  = map (inputVal,
               aJson.getArrayItem(inputMap, 0)->valueint,
               aJson.getArrayItem(inputMap, 1)->valueint,
-              aJson.getArrayItem(inputMap, 2)->valueint,
+              min=aJson.getArrayItem(inputMap, 2)->valueint*10,
-              max=aJson.getArrayItem(inputMap, 3)->valueint);
+              max=aJson.getArrayItem(inputMap, 3)->valueint*10);
+      else mappedInputVal =  inputVal*10;
+
       if (aJson.getArraySize(inputMap)==5) Noize = aJson.getArrayItem(inputMap, 4)->valueint;
-      if (mappedInputVal>max) mappedInputVal=max;
+
+      if (mappedInputVal>max)
+                              {
+                              mappedInputVal = max;
+                              inputVal = 1023;
+                              }
+      if (mappedInputVal<min) {
+                              mappedInputVal = min;
+                              inputVal = 0;
+                              }
+
       if (aJson.getArraySize(inputMap)==2)
         {
           simple = 1;
-          if (mappedInputVal < aJson.getArrayItem(inputMap, 0)->valueint) mappedInputVal = 0;
+          if (inputVal < aJson.getArrayItem(inputMap, 0)->valueint) mappedInputVal = 0;
-            else if (mappedInputVal > aJson.getArrayItem(inputMap, 1)->valueint) mappedInputVal = 1;
+            else if (inputVal > aJson.getArrayItem(inputMap, 1)->valueint) mappedInputVal = 1;
                  else return;
         }
-      }
+      } else mappedInputVal =  inputVal*10; //No mapping arguments
+
     if (simple) {
        if (mappedInputVal != store->currentValue)
        {
@@ -497,29 +953,34 @@ void Input::analogPoll() {
            store->currentValue = mappedInputVal;
        }}
     else
-    if (abs(mappedInputVal - store->currentValue)>Noize) // value changed >ANALOG_NOIZE
+    {
+    //if (abs(mappedInputVal - store->currentValue)>Noize || mappedInputVal == min || mappedInputVal ==max) // value changed >ANALOG_NOIZE
+    if (abs(inputVal - store->currentValue)>Noize ) // value changed >ANALOG_NOIZE
         store->bounce = 0;
      else // no change
         if (store->bounce<ANALOG_STATE_ATTEMPTS) store->bounce ++;
 
-        if (store->bounce<ANALOG_STATE_ATTEMPTS-1 && (mappedInputVal != store->currentValue))  //confirmed change
+    if ((store->bounce<ANALOG_STATE_ATTEMPTS-1 || mappedInputVal == min || mappedInputVal ==max )&& (inputVal != store->currentValue))//confirmed change
         {
-            onAnalogChanged(mappedInputVal);
+            onAnalogChanged(mappedInputVal/10.);
-            store->currentValue = mappedInputVal;
+      //      store->currentValue = mappedInputVal;
+            store->currentValue = inputVal;
         }
-
+     }
 }
 
 
 
 
 void Input::onContactChanged(int newValue) {
-    debugSerial << F("IN:") << (pin) << F("=") << newValue << endl;
+
     aJsonObject *item = aJson.getObjectItem(inputObj, "item");
+    aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
+    if (!item && !emit) return;
     aJsonObject *scmd = aJson.getObjectItem(inputObj, "scmd");
     aJsonObject *rcmd = aJson.getObjectItem(inputObj, "rcmd");
-    aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
+    debugSerial << F("LEGACY IN:") << (pin) << F("=") << newValue << endl;
-    if (emit) {
+    if (emit && emit->type == aJson_String) {
 #ifdef WITH_DOMOTICZ
         if (getIdxField())
         {  (newValue) ? publishDataToDomoticz(0, emit, "{\"command\":\"switchlight\",\"idx\":%s,\"switchcmd\":\"On\"}",
@@ -536,40 +997,40 @@ if (mqttClient.connected() && !ethernetIdleCount)
 {
 if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
         if (newValue) {  //send set command
-            if (!scmd) mqttClient.publish(addrstr, "ON", true);
+            if (!scmd || scmd->type != aJson_String) mqttClient.publish(addrstr, "ON", true);
             else if (strlen(scmd->valuestring))
                 mqttClient.publish(addrstr, scmd->valuestring, true);
         } else {  //send reset command
-            if (!rcmd) mqttClient.publish(addrstr, "OFF", true);
+            if (!rcmd || rcmd->type != aJson_String) mqttClient.publish(addrstr, "OFF", true);
             else if (strlen(rcmd->valuestring))mqttClient.publish(addrstr, rcmd->valuestring, true);
         }
 }
   }
 } // emit
-    if (item) {
+    if (item && item->type == aJson_String) {
       //debugSerial <<F("Controlled item:")<< item->valuestring <<endl;
         Item it(item->valuestring);
         if (it.isValid()) {
             if (newValue) {  //send set command
-                if (!scmd) it.Ctrl(CMD_ON, 0, NULL, true);
+                if (!scmd || scmd->type != aJson_String) it.Ctrl(CMD_ON, 0, NULL);
                 else if (strlen(scmd->valuestring))
-                    it.Ctrl(scmd->valuestring, true);
+                    it.Ctrl(scmd->valuestring);
             } else {  //send reset command
-                if (!rcmd) it.Ctrl(CMD_OFF, 0, NULL, true);
+                if (!rcmd || rcmd->type != aJson_String) it.Ctrl(CMD_OFF, 0, NULL);
                 else if (strlen(rcmd->valuestring))
-                    it.Ctrl(rcmd->valuestring, true);
+                    it.Ctrl(rcmd->valuestring);
             }
         }
     }
 }
 
-void Input::onAnalogChanged(int newValue) {
+void Input::onAnalogChanged(float newValue) {
     debugSerial << F("IN:") << (pin) << F("=") << newValue << endl;
     aJsonObject *item = aJson.getObjectItem(inputObj, "item");
     aJsonObject *emit = aJson.getObjectItem(inputObj, "emit");
 
 
-    if (emit) {
+    if (emit && emit->type == aJson_String) {
 
 //#ifdef WITH_DOMOTICZ
 //        if (getIdxField()) {
@@ -581,15 +1042,17 @@ void Input::onAnalogChanged(int newValue) {
               strncpy(addrstr,emit->valuestring,sizeof(addrstr));
               if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
               char strVal[16];
-              itoa(newValue,strVal,10);
+              //itoa(newValue,strVal,10);
+              printFloatValueToStr(newValue, strVal);
               if (mqttClient.connected() && !ethernetIdleCount)
                   mqttClient.publish(addrstr, strVal, true);
 }
 
-    if (item) {
+    if (item && item->type == aJson_String) {
+        int intNewValue = round(newValue);
         Item it(item->valuestring);
         if (it.isValid()) {
-           it.Ctrl(0, 1, &newValue, true);
+           it.Ctrl(0, 1, &intNewValue, true);
         }
     }
 }
@@ -598,6 +1061,8 @@ void Input::onAnalogChanged(int newValue) {
 bool Input::publishDataToDomoticz(int pollTimeIncrement, aJsonObject *emit, const char *format, ...)
 {
 #ifdef WITH_DOMOTICZ
+if (emit && emit->type == aJson_String)
+{
     debugSerial << F("\nDomoticz valstr:");
     char valstr[50];
     va_list args;
@@ -609,7 +1074,8 @@ bool Input::publishDataToDomoticz(int pollTimeIncrement, aJsonObject *emit, cons
         mqttClient.publish(emit->valuestring, valstr);
     if (pollTimeIncrement)
         setNextPollTime(millis() + pollTimeIncrement);
-    debugSerial << F(" NextPollMillis=") << nextPollTime() << endl;
+//    debugSerial << F(" NextPollMillis=") << nextPollTime() << endl;
+}
 
 #endif
     return true;
@@ -617,7 +1083,48 @@ bool Input::publishDataToDomoticz(int pollTimeIncrement, aJsonObject *emit, cons
 
 char* Input::getIdxField() {
     aJsonObject *idx = aJson.getObjectItem(inputObj, "idx");
-    if(idx&&idx->valuestring)
+    if(idx&& idx->type == aJson_String && idx->valuestring)
         return idx->valuestring;
     return nullptr;
 }
+
+
+
+readCache::readCache()
+{
+   addr=0;
+   type=0;
+}
+
+uint16_t readCache::analogReadCached (uint8_t _pin)
+{
+  if ((_pin==addr) && (IN_ANALOG==type)) return cached_data;
+  addr = _pin;
+  type = IN_ANALOG;
+  cached_data =analogRead(_pin);
+  return cached_data;
+}
+
+uint8_t  readCache::digitalReadCached(uint8_t _pin)
+{
+  ///TBD
+}
+
+#ifdef MCP23017
+uint8_t  readCache::I2CReadBit(uint8_t _type, uint8_t _addr, uint8_t _pin)
+{
+if (addr!=_addr || type != _type)
+{
+  type=_type;
+  addr=_addr;
+  cached_data = mcp.readGPIOAB();
+}
+return (cached_data >> _pin ) & 0x1;
+}
+#endif
+
+void readCache::invalidateInputCache()
+{
+  addr=0;
+  type=0;
+}

lighthub/inputs.h

@@ -24,6 +24,7 @@ e-mail    anklimov@gmail.com
 #define IN_ACTIVE_HIGH   2      // High level = PUSHED/ CLOSED/ ON othervise :Low Level. Use INPUT mode instead of INPUT_PULLUP for digital pin
 #define IN_ANALOG        64     // Analog input
 #define IN_RE            32     // Rotary Encoder (for further use)
+#define IN_I2C           128    // MCP23017
 
 #define IN_PUSH_ON       0      // PUSH - ON, Release - OFF (ovverrided by pcmd/rcmd) - DEFAULT
 #define IN_PUSH_TOGGLE   1      // Used for push buttons. Every physicall push toggle logical switch  on/off. Toggle on leading edge
@@ -35,13 +36,39 @@ e-mail    anklimov@gmail.com
 #define IN_COUNTER       8
 #define IN_UPTIME       16
 
+#define IS_IDLE 0
+#define IS_PRESSED 1
+#define IS_RELEASED 2
+#define IS_LONG 3
+#define IS_REPEAT 4
+#define IS_WAITPRESS 5
+#define IS_PRESSED2 6
+#define IS_RELEASED2 7
+#define IS_LONG2 8u
+#define IS_REPEAT2 9u
+#define IS_PRESSED3 10u
+#define IS_LONG3 11u
+#define IS_REPEAT3 12u
+#define IS_WAITRELEASE 13u
+#define IS_REQSTATE 0xFF
+
+
 
 #define SAME_STATE_ATTEMPTS 3
 #define ANALOG_STATE_ATTEMPTS 6
 #define ANALOG_NOIZE 1
 
-#define CHECK_INPUT  1
+#define CHECK_SENSOR 1
-#define CHECK_SENSOR 2
+#define CHECK_INPUT  2
+#define CHECK_INTERRUPT 3
+
+
+#define T_LONG 1000
+#define T_IDLE 600
+#define T_RPT 300
+#define T_RPT_PULSE 150
+
+
 
 // in syntaxis
 // "pin": { "T":"N", "emit":"out_emit", item:"out_item", "scmd": "ON,OFF,TOGGLE,INCREASE,DECREASE", "rcmd": "ON,OFF,TOGGLE,INCREASE,DECREASE", "rcmd":"repeat_command" }
@@ -79,11 +106,25 @@ extern aJsonObject *inputs;
 typedef union {
     long int aslong;
     uint32_t timestamp;
+    // Analog input structure
     struct {
-        int8_t logicState;
+        uint8_t reserved;
-        int8_t bounce;
+        uint8_t logicState;
         int16_t currentValue;
     };
+    // Digital input structure
+    struct {
+        uint8_t  toggle1:1;
+        uint8_t  toggle2:1;
+        uint8_t  toggle3:1;
+        uint8_t  lastValue:1;
+        uint8_t  delayedState:1;
+        uint8_t  bounce:3;
+        uint8_t  state:4;
+        uint8_t  reqState:4;
+        uint16_t timestamp16;
+
+    };
 
 } inStore;
 
@@ -94,18 +135,15 @@ public:
     uint8_t pin;
     inStore *store;
 
-    Input(int pin);
+    Input(aJsonObject *obj, aJsonObject * configObj = NULL);
-
-    Input(aJsonObject *obj);
-
     Input(char *name);
 
     boolean isValid();
 
     void onContactChanged(int newValue);
-    void onAnalogChanged(int newValue);
+    void onAnalogChanged(float newValue);
 
-    int poll(short cause);
+    int Poll(short cause);
     void setup();
 
     static void inline onCounterChanged(int i);
@@ -119,10 +157,10 @@ public:
 
 
 protected:
-    void Parse();
+    void Parse(aJsonObject * configObj = NULL);
 
-    void contactPoll();
+    void contactPoll(short cause);
-    void analogPoll();
+    void analogPoll(short cause);
 
     void dht22Poll();
 
@@ -140,4 +178,25 @@ protected:
     bool publishDataToDomoticz(int , aJsonObject *, const char *format, ...);
 
     char* getIdxField();
+    bool changeState(uint8_t newState, short cause);
+    //bool executeCommand(aJsonObject* cmd, int8_t toggle = -1, char* defCmd = NULL);
 };
+
+
+
+class readCache {
+public:
+  readCache();
+  uint16_t analogReadCached (uint8_t pin);
+  uint8_t  digitalReadCached(uint8_t pin);
+  #ifdef MCP23017
+  uint8_t  I2CReadBit(uint8_t type, uint8_t addr, uint8_t pin);
+  #endif
+  void invalidateInputCache();
+protected:
+  uint8_t   addr;
+  uint8_t   type;
+  uint16_t  cached_data;
+};
+
+extern readCache inCache;

lighthub/item.h

@@ -1,4 +1,4 @@
-/* Copyright © 2017-2018 Andrey Klimov. All rights reserved.
+/* Copyright © 2017-2020 Andrey Klimov. All rights reserved.
 
 Licensed under the Apache License, Version 2.0 (the "License");
 you may not use this file except in compliance with the License.
@@ -17,18 +17,25 @@ GIT:      https://github.com/anklimov/lighthub
 e-mail    anklimov@gmail.com
 
 */
+#pragma once
 #include "options.h"
+#include "abstractout.h"
 
-#define S_SET 1
+#define POLLING_SLOW 1
-#define S_TEMP 2
+#define POLLING_FAST 2
-#define S_MODE 3
+#define POLLING_INT  3
-#define S_SETPOINT 4
+
-#define S_POWER 5
+#define S_NOTFOUND  0
-#define S_VOL 6
+#define S_SETnCMD 0
-#define S_HEAT 7
+#define S_CMD 1
-#define S_HSV 8
+#define S_SET 2
-#define S_RGB 9
+#define S_HSV 3
-#define S_RPM 10
+#define S_RGB 4
+#define S_FAN 5
+#define S_MODE 6
+#define S_HUE 7
+#define S_SAT 8
+#define S_ADDITIONAL 64
 
 #define CH_DIMMER 0   //DMX 1 ch
 #define CH_RGBW   1   //DMX 4 ch
@@ -40,14 +47,32 @@ e-mail    anklimov@gmail.com
 #define CH_GROUP   7  //Group pseudochannel
 #define CH_VCTEMP  8  //Vacom PID regulator
 #define CH_VC      9  //Vacom modbus motor regulator
-#define CH_AC_HAIER 10  //AC Haier
+#define CH_AC 10  //AC Haier
+#define CH_SPILED 11
+#define CH_MOTOR  12
+#define CH_MBUS  14
+//#define CHANNEL_TYPES 13
+
+//static uint32_t pollInterval[CHANNEL_TYPES] = {0,0,0,0,MODB};
+//static uint32_t nextPollTime[CHANNEL_TYPES] = {0,0,0,0,0,0,0,0,0,0,0,0,0};
+
 #define CH_WHITE   127//
 
 #define CMD_NUM 0
 #define CMD_UNKNOWN  -1
 #define CMD_JSON -2
-#define CMD_RGB  -3
+//#define CMD_RGB  -3
-#define CMD_HSV  -4
+//#define CMD_HSV  -4
+
+typedef  char cmdstr[9];
+
+const cmdstr commands_P[] PROGMEM =
+{
+"","ON","OFF","REST","TOGGLE","HALT","XON","XOFF","INCREASE","DECREASE",
+"HEAT","COOL","AUTO","FAN_ONLY","DRY","STOP","HIGH","MEDIUM","LOW",
+"TRUE","FALSE","ENABLED","DISABLED","RGB","HSV"
+};
+#define commandsNum sizeof(commands_P)/sizeof(cmdstr)
 
 #define CMD_ON  1
 #define CMD_OFF 2
@@ -58,12 +83,38 @@ e-mail    anklimov@gmail.com
 #define CMD_XOFF 7    //off only if was previously turned on by CMD_XON
 #define CMD_UP 8      //increase
 #define CMD_DN 9      //decrease
-#define CMD_SET 0xe
+#define CMD_HEAT 0xa
-#define CMD_MASK 0xf
+#define CMD_COOL 0xb
+#define CMD_AUTO 0xc
+#define CMD_FAN 0xd
+#define CMD_DRY 0xe
+#define CMD_STOP 0xf
+#define CMD_HIGH 0x10  //AC fan leve
+#define CMD_MED 0x11
+#define CMD_LOW 0x12
+#define CMD_ENABLED 0x13
+#define CMD_DISABLED 0x14
+#define CMD_TRUE 0x15
+#define CMD_FALSE 0x16
+#define CMD_RGB  0x17
+#define CMD_HSV  0x18
+//#define CMD_CURTEMP 0xf
+#define CMD_MASK 0xff
+#define FLAG_MASK 0xff00
 
-#define CMD_CURTEMP 127
+
-#define CMD_RETRY 64
+#define SEND_COMMAND 0x100
-#define CMD_REPORT 32
+#define SEND_PARAMETERS 0x200
+#define SEND_RETRY 0x400
+#define SEND_DEFFERED 0x800
+#define ACTION_NEEDED 0x1000
+#define ACTION_IN_PROCESS 0x2000
+
+
+
+
+
+//#define CMD_REPORT 32
 
 #define I_TYPE 0 //Type of item
 #define I_ARG  1 //Chanel-type depended argument or array of arguments (pin, address etc)
@@ -89,99 +140,127 @@ extern short thermoSetCurTemp(char *name, float t);
 
 int txt2cmd (char * payload);
 
+enum itemStoreType {
+ST_VOID         = 0,
+ST_PERCENTS     = 1,
+ST_HS           = 2,
+ST_HSV          = 3,
+ST_FLOAT_CELSIUS= 4,
+ST_FLOAT_FARENHEIT= 5,
+ST_RGB          = 6,
+ST_RGBW         = 7,
+ST_PERCENTS255  = 8,
+ST_HSV255       = 9,
+ST_INT32        = 10,
+ST_UINT32       = 11,
+ST_STRING       = 12,
+ST_FLOAT        = 13,
+ST_COMMAND      = 15
+
+};
+
+#pragma pack(push, 1)
 typedef union
 {
   long int aslong;
+  int32_t  asInt32;
+  uint32_t asUint32;
+  char*    asString;
+  float    asfloat;
   struct
       {
-        int16_t h;
+        uint8_t cmd_code;
-        int8_t  s;
+        uint8_t cmd_flag;
-        int8_t  v;
+        uint8_t cmd_effect;
+        uint8_t cmd_effect_param;
       };
-} HSVstore;
+  struct
+      { uint8_t  v;
+        uint8_t  s;
+        uint16_t h:15;
+        uint16_t hsv_flag:1;
+      };
+  struct
+      {
+        uint8_t  r;
+        uint8_t  g;
+        uint8_t  b;
+        uint8_t  w;//:7;
+//        uint8_t  rgb_flag:1;
+      };
+} itemStore;
 
-
+class itemCmd
-typedef union
 {
-  long int aslong;
+public:
-  struct
+  itemStoreType type;
-      {
+  itemStore     param;
-        int8_t  r;
+  itemCmd Percents(int i);
-        int8_t  g;
+  itemCmd Int(int32_t i);
-        int8_t  b;
+  itemCmd Int(uint32_t i);
-        int8_t  v;
+  itemCmd Cmd(uint8_t i);
-      };
+  char * toString(char * Buffer, int bufLen);
-} RGBVstore;
+  short  toCmd();
+  } ;
+
+#pragma pack(pop)
 
 class Item
 {
   public:
-  aJsonObject *itemArr, *itemArg,*itemVal;
+  aJsonObject *itemArr, *itemArg,*itemVal,*itemExt;
   uint8_t itemType;
-
+  abstractOut * driver;
 
   Item(char * name);
   Item(aJsonObject * obj);
+  ~Item();
+
   boolean isValid ();
-  virtual int Ctrl(short cmd, short n=0, int * Parameters=NULL, boolean send=true, int subItem=0);
+  boolean Setup();
-  virtual int Ctrl(char * payload, boolean send=true, char * subItem=NULL);
+  void Stop();
+  int Ctrl(short cmd, short n=0, int * Parameters=NULL, int suffixCode=0, char* subItem=NULL);
+  int Ctrl(itemCmd cmd, int suffixCode=0, char* subItem=NULL);
+  int Ctrl(char * payload,  char * subItem=NULL);
 
   int getArg(short n=0);
-  boolean getEnableCMD(int delta);
   //int getVal(short n); //From VAL array. Negative if no array
   long int getVal(); //From int val OR array
-  uint8_t getCmd(bool ext = false);
+  uint8_t getCmd();
+  long int getExt(); //From int val OR array
+  void setExt(long int par);
+  chPersistent * getPersistent();
+  chPersistent * setPersistent(chPersistent * par);
   void setCmd(uint8_t cmdValue);
-  //void setVal(uint8_t n, int par);
+  short getFlag   (short flag=FLAG_MASK);
+  void setFlag   (short flag);
+  void clearFlag (short flag);
   void setVal(long int par);
-  //void copyPar (aJsonObject *itemV);
+  int Poll(int cause);
+  int SendStatus(int sendFlags);
+  int isActive();
+  int getChanType();
   inline int On (){return Ctrl(CMD_ON);};
   inline int Off(){return Ctrl(CMD_OFF);};
   inline int Toggle(){return Ctrl(CMD_TOGGLE);};
-  int Poll();
-  int SendStatus(short cmd, short n=0, int * Par=NULL, boolean deferred = false);
 
   protected:
+  //short cmd2changeActivity(int lastActivity, short defaultCmd = CMD_SET);
   int VacomSetFan (int8_t  val, int8_t  cmd=0);
-  int VacomSetHeat(int addr, int8_t  val, int8_t  cmd=0);
+  int VacomSetHeat(int8_t  val, int8_t  cmd=0);
   int modbusDimmerSet(int addr, uint16_t _reg, int _regType, int _mask, uint16_t value);
-  void mb_fail(short addr, short op, int val, int cmd);
+  int modbusDimmerSet(uint16_t value);
-  int isActive();
+  void mb_fail();
   void Parse();
   int checkModbusDimmer();
   int checkModbusDimmer(int data);
   boolean checkModbusRetry();
+  boolean checkVCRetry();
+  boolean checkHeatRetry();
   void sendDelayedStatus();
 
   int checkFM();
+  char defaultSubItem[10];
+  int  defaultSuffixCode;
 
 };
-
-
-/*
-
-class PooledItem : public Item
-{
-  public:
-  virtual int onContactChanged() = 0;
-  virtual void Idle ();
-  protected:
-  int PoolingInterval;
-  unsigned long next;
-  virtual int Pool() =0;
-
-};
-
-
-
-
-
-class Vacon : public Item
-{
-public:
-int Pool ();
-virtual int Ctrl(short cmd, short n=0, int * Par=NULL);
-protected:
-};
-
-*/

lighthub/main.h

@@ -21,33 +21,35 @@
 
 #if defined(ARDUINO_ARCH_ESP8266)
 #include <FS.h>                   //this needs to be first, or it all crashes and burns...
+//#include "SPIFFS.h"
 #include <ESP_EEPROM.h>
-#include <ESP8266HTTPClient.h>
+//#include <ESP8266HTTPClient.h>
 //#include <ArduinoHttpClient.h>
 //#include "HttpClient.h"
-#include <WiFiManager.h>
+//#include <WiFiManager.h>
-#include <DNSServer.h>
+//#include <DNSServer.h>
-#include <ESP8266WebServer.h>
+//#include <ESP8266WebServer.h>
-#include <ESP8266WiFi.h>
+//#include <ESP8266WiFi.h>
 #include <user_interface.h>
-#define Ethernet WiFi
+//#define Ethernet WiFi
 #endif
 
 #if defined ARDUINO_ARCH_ESP32
 #include <FS.h>                   //this needs to be first, or it all crashes and burns...
+//#include "SPIFFS.h"
 //#include <EEPROM.h>
 #include <NRFFlashStorage.h>
 //#include "HttpClient.h"
 //#include <ArduinoHttpClient.h>
-#include <HTTPClient.h>
+//#include <HTTPClient.h>
-#include <WiFi.h>
+//#include <WiFi.h>
-#include <WiFiClient.h>
+//#include <WiFiClient.h>
-#include <WiFiClientSecure.h>
+//#include <WiFiClientSecure.h>
-#include <WebServer.h>
+//#include <WebServer.h>
-#include <WiFiManager.h>
+//#include <WiFiManager.h>
-#include <DNSServer.h>
+//include <DNSServer.h>
 
-#define Ethernet WiFi
+//#define Ethernet WiFi
 #endif
 
 #ifdef NRF5
@@ -57,11 +59,16 @@
 
 #ifdef ARDUINO_ARCH_STM32
 #include "HttpClient.h"
-#include "UIPEthernet.h"
+//#include "UIPEthernet.h"
 #include <NRFFlashStorage.h>
 //#include <EEPROM.h>
 #endif
 
+#include "streamlog.h"
+extern Streamlog  debugSerial;
+extern Streamlog  infoSerial;
+extern Streamlog  errorSerial;
+
 #if defined(__SAM3X8E__)
 #define wdt_res() watchdogReset()
 #define wdt_en()
@@ -117,13 +124,13 @@
 #include "DallasTemperature.h"
 #endif
 
-#ifndef MODBUS_DISABLE
+#ifdef _modbus
 #include <ModbusMaster.h>
 #endif
 
-#ifndef DMX_DISABLE
+//#ifndef DMX_DISABLE
-#include "FastLED.h"
+//#include "FastLED.h"
-#endif
+//#endif
 
 #ifdef _owire
 #include "owTerm.h"
@@ -133,13 +140,33 @@
 #include "dmx.h"
 #endif
 
+#ifdef WIFI_ENABLE
 
-#ifdef Wiz5500
+  #if defined(ARDUINO_ARCH_ESP32)
-#include <Ethernet2.h>
+        #include <WiFi.h>
-#else
+        #include <HTTPClient.h>
-#if defined(ARDUINO_ARCH_AVR) || defined(__SAM3X8E__) || defined(NRF5)
+        #include <WiFiClient.h>
-#include <Ethernet.h>
+        #include <WiFiClientSecure.h>
-#endif
+        #include <WiFiManager.h>
+        #include <WebServer.h>
+  #else
+        #include <ESP8266WiFi.h>
+        #include <ESP8266HTTPClient.h>
+        #include <WiFiManager.h>
+        #include <DNSServer.h>
+        #include <ESP8266WebServer.h>
+  #endif
+#define Ethernet WiFi
+#else  //Wired connection
+        #ifdef Wiz5500
+        #include <Ethernet2.h>
+        #else
+            #ifdef ARDUINO_ARCH_STM32
+            #include "UIPEthernet.h"
+            #else
+            #include <Ethernet.h>
+            #endif
+        #endif
 #endif
 
 
@@ -153,7 +180,7 @@
 
 #include "Arduino.h"
 #include "utils.h"
-#include "homiedef.h"
+#include "textconst.h"
 #include <PubSubClient.h>
 #include <SPI.h>
 #include <string.h>
@@ -169,14 +196,19 @@ extern Artnet *artnet;
 
 enum lan_status {
     INITIAL_STATE = 0,
-    HAVE_IP_ADDRESS = 1,
+    AWAITING_ADDRESS = 1,
-    IP_READY_CONFIG_LOADED_CONNECTING_TO_BROKER = 2,
+    HAVE_IP_ADDRESS = 2,
-    OPERATION = 3,
+    LIBS_INITIALIZED = 3,
-    RETAINING_COLLECTING = 4,
+    IP_READY_CONFIG_LOADED_CONNECTING_TO_BROKER = 4,
-    AWAITING_ADDRESS = -10,
+    RETAINING_COLLECTING = 5,
-    RECONNECT = 12,
+    OPERATION = 6,
-    READ_RE_CONFIG = -11,
+
-    DO_NOTHING = -14
+    DO_REINIT = -10,
+    REINIT = - 11,
+    DO_RECONNECT =  12,
+    RECONNECT = 13,
+    READ_RE_CONFIG = 14,
+    DO_NOTHING = -15
 };
 
 typedef union {
@@ -184,6 +216,7 @@ typedef union {
     uint8_t   UID_Byte[20];
 } UID;
 
+bool isNotRetainingStatus();
 //void watchdogSetup(void);
 
 void mqttCallback(char *topic, byte *payload, unsigned int length);
@@ -224,7 +257,7 @@ void printBool(bool arg);
 
 void saveFlash(short n, char *str);
 
-int loadFlash(short n, char *str, short l=32);
+int loadFlash(short n, char *str, short l=MAXFLASHSTR);
 
 void saveFlash(short n, IPAddress& ip);
 

lighthub/modules/in_ccs811_hdc1080.cpp

@@ -2,6 +2,8 @@
 #include "Arduino.h"
 #include "options.h"
 #include "Streaming.h"
+#include "item.h"
+#include "main.h"
 
 #if defined(M5STACK)
 #include <M5Stack.h>
@@ -17,7 +19,7 @@ static bool HDC1080ready = false;
 static bool CCS811ready = false;
 
 
-int  in_ccs811::Setup(int addr)
+int  in_ccs811::Setup()
 {
   if (CCS811ready) {debugSerial<<F("ccs811 is already initialized")<<endl; return 0;}
 
@@ -29,13 +31,17 @@ int  in_ccs811::Setup(int addr)
 Serial.println("CCS811 Init");
 
 Wire.begin(); //Inialize I2C Harware
+Wire.setClock(4000);
 
   //It is recommended to check return status on .begin(), but it is not
   //required.
   CCS811Core::status returnCode = ccs811.begin();
+  //CCS811Core::CC811_Status_e returnCode = ccs811.beginWithStatus();
   if (returnCode != CCS811Core::SENSOR_SUCCESS)
+  //if (returnCode != CCS811Core::CCS811_Stat_SUCCESS)
   {
-    Serial.println("CCS811 Init error");
+    Serial.print("CCS811 Init error ");
+    //Serial.println(ccs811.statusString(returnCode));
     printDriverError(returnCode);
     return 0;
   }
@@ -52,7 +58,7 @@ delay(2000); */
 return 1;
 }
 
-int in_hdc1080::Setup(int addr)
+int in_hdc1080::Setup()
 {
 if (HDC1080ready)  {debugSerial<<F("hdc1080 is already initialized")<<endl; return 0;}
 Serial.println("HDC1080 Init ");
@@ -72,20 +78,21 @@ return 1;
 
 void i2cReset(){
 Wire.endTransmission(true);
-#if defined (ARDUINO_ARCH_ESP8266)
+#if defined (SCL_RESET)
 SCL_LOW();
 delay(300);
 SCL_HIGH();
 #endif
 }
 
-int in_hdc1080::Poll()
+int in_hdc1080::Poll(short cause)
 {
   float h,t;
   int reg;
+if (cause!=POLLING_SLOW) return 0;
 if (!HDC1080ready) {debugSerial<<F("HDC1080 not initialized")<<endl; return 0;}
 Serial.print("HDC Status=");
-Serial.print(reg=hdc1080.readRegister().rawData,HEX);
+Serial.println(reg=hdc1080.readRegister().rawData,HEX);
 if (reg!=0xff)
 {
   Serial.print(" T=");
@@ -115,10 +122,10 @@ else //ESP I2C glitch
     Serial.println("I2C Reset");
     i2cReset();
   }
-return 1;
+return INTERVAL_POLLING;
 }
 
-int in_ccs811::Poll()
+int in_ccs811::Poll(short cause)
 {
   if (!CCS811ready) {debugSerial<<F("ccs811 not initialized")<<endl; return 0;}
   #ifdef WAK_PIN
@@ -156,10 +163,11 @@ int in_ccs811::Poll()
     #endif
 
 
-
+    if (co2<10000.) //Spontaneous calculation error suppress
+    {
     publish(co2,"/CO2");
     publish(tvoc,"/TVOC");
-    publish(ccs811Baseline,"/base");
+    publish(ccs811Baseline,"/base");}
     Serial.println("]");
     printSensorError();
 

lighthub/modules/in_ccs811_hdc1080.h

@@ -18,8 +18,17 @@
 
 #define SCL_LOW()   (GPES = (1 << twi_scl))
 #define SCL_HIGH()  (GPEC = (1 << twi_scl))
+#define SCL_RESET
 #endif
 
+/*
+#if defined (__SAM3X8E__)
+#define SCL_LOW()   digitalWrite(21,LOW)
+#define SCL_HIGH()  digitalWrite(21,HIGH)
+#define SCL_RESET
+#endif
+*/
+
 #if defined (ARDUINO_ARCH_ESP32)
 #undef WAK_PIN
 //#ifndef WAK_PIN
@@ -40,8 +49,8 @@ public:
     //CCS811 ccs811(CCS811_ADDR);
     //uint16_t ccs811Baseline;
     in_ccs811(Input * _in):abstractIn(_in){};
-    int Setup(int addr) override;
+    int Setup() override;
-    int Poll() override;
+    int Poll(short cause) override;
 
 protected:
    void printDriverError( CCS811Core::status errorCode );
@@ -52,8 +61,8 @@ class in_hdc1080 : public abstractIn {
 public:
     //ClosedCube_HDC1080 hdc1080;
     in_hdc1080(Input * _in):abstractIn(_in){};
-    int Setup(int addr) override;
+    int Setup() override;
-    int Poll() override;
+    int Poll(short cause) override;
 
 protected:
     void printSerialNumber();

lighthub/modules/out_ac.cpp

@@ -0,0 +1,471 @@
+#ifndef AC_DISABLE
+
+#include "modules/out_ac.h"
+#include "Arduino.h"
+#include "options.h"
+#include "Streaming.h"
+#include "item.h"
+#include "textconst.h"
+#include "main.h"
+
+#ifndef AC_Serial
+#define AC_Serial Serial3
+#endif
+
+#define INTERVAL_AC_POLLING      5000L
+
+static int driverStatus = CST_UNKNOWN;
+
+static int fresh =0;
+static int power = 0;
+static int swing =0;
+static int lock_rem =0;
+static int cur_tmp = 0;
+static int set_tmp = 0;
+static int fan_spd = 0;
+static int mode = 0;
+
+long prevPolling = 0;
+byte inCheck = 0;
+byte qstn[] = {255,255,10,0,0,0,0,0,1,1,77,1,90}; // Команда опроса
+byte data[37] = {}; //Массив данных
+byte on[]   = {255,255,10,0,0,0,0,0,1,1,77,2,91}; // Включение кондиционера
+byte off[]  = {255,255,10,0,0,0,0,0,1,1,77,3,92}; // Выключение кондиционера
+byte lock[] = {255,255,10,0,0,0,0,0,1,3,0,0,14};  // Блокировка пульта
+
+//Extended subItem set
+const char LOCK_P[]   PROGMEM = "lock";
+const char QUIET_P[]  PROGMEM = "queit";
+const char SWING_P[]  PROGMEM = "swing";
+const char RAW_P[]    PROGMEM = "raw";
+//const char IDLE_P[]   PROGMEM = "IDLE";
+/*
+extern const char HEAT_P[] PROGMEM;
+extern const char COOL_P[] PROGMEM;
+extern const char AUTO_P[] PROGMEM;
+extern const char FAN_ONLY_P[] PROGMEM;
+extern const char DRY_P[] PROGMEM;
+extern const char HIGH_P[] PROGMEM;
+extern const char MED_P[]  PROGMEM;
+extern const char LOW_P[]  PROGMEM;
+*/
+void out_AC::InsertData(byte data[], size_t size){
+
+    char s_mode[10];
+    set_tmp = data[B_SET_TMP]+16;
+    cur_tmp = data[B_CUR_TMP];
+    mode    = data[B_MODE];
+    fan_spd = data[B_FAN_SPD];
+    swing   = data[B_SWING];
+    power   = data[B_POWER];
+    lock_rem = data[B_LOCK_REM];
+    fresh   = data[B_FRESH];
+  /////////////////////////////////
+  if (fresh & 0x01)
+        publishTopic(item->itemArr->name, "ON","/fresh");
+  else  publishTopic(item->itemArr->name, "OFF","/fresh");
+
+  /////////////////////////////////
+  if (lock_rem == 0x80){
+      publishTopic(item->itemArr->name, "ON","/lock");
+  }
+  if (lock_rem == 0x00){
+      publishTopic(item->itemArr->name, "OFF","/lock");
+  }
+  /////////////////////////////////
+  /*
+  if (power == 0x01 || power == 0x11){
+      publishTopic(item->itemArr->name,"Power", "on");
+  }
+  if (power == 0x00 || power == 0x10){
+      publishTopic(item->itemArr->name,"Power", "off");
+  }
+  */
+
+  Serial.print ("Power=");
+  Serial.println(power);
+
+  if (power & 0x08)
+      publishTopic(item->itemArr->name, "ON", "/quiet");
+  else  publishTopic(item->itemArr->name, "OFF" , "/quiet");
+
+
+  if (power & 0x02) //Compressor on
+      publishTopic(item->itemArr->name, "ON","/compressor");
+  else
+      publishTopic(item->itemArr->name, "OFF","/compressor");
+
+
+  publishTopic(item->itemArr->name, (long) swing,"/swing");
+  //publishTopic(item->itemArr->name, (long) fan_spd,"/fan");
+
+  /////////////////////////////////
+  if (fan_spd == 0x00){
+      publishTopic(item->itemArr->name, "high","/fan");
+  }
+  if (fan_spd == 0x01){
+      publishTopic(item->itemArr->name, "medium","/fan");
+  }
+  if (fan_spd == 0x02){
+      publishTopic(item->itemArr->name, "low","/fan");
+  }
+  if (fan_spd == 0x03){
+      publishTopic(item->itemArr->name, "auto","/fan");
+  }
+
+  if (swing == 0x00)
+       publishTopic(item->itemArr->name, "OFF","/swing");
+  else publishTopic(item->itemArr->name, "ON","/swing");
+  /*
+  if (swing == 0x01){
+      publishTopic(item->itemArr->name, "ud","swing");
+  }
+  if (swing == 0x02){
+      publishTopic(item->itemArr->name, "lr","swing");
+  }
+  if (swing == 0x03){
+      publishTopic(item->itemArr->name, "all","swing");
+  }*/
+  /////////////////////////////////
+
+  publishTopic(item->itemArr->name,(long)set_tmp,"/set");
+  publishTopic(item->itemArr->name, (long)cur_tmp, "/temp");
+  ////////////////////////////////////
+  s_mode[0]='\0';
+
+  if (mode == 0x00){
+    strcpy_P(s_mode,AUTO_P);
+  }
+  else if (mode == 0x01){
+    strcpy_P(s_mode,COOL_P);
+  }
+  else if (mode == 0x02){
+    strcpy_P(s_mode,HEAT_P);
+  }
+  else if (mode == 0x03){
+    strcpy_P(s_mode,FAN_ONLY_P);
+  }
+  else if (mode == 0x04){
+    strcpy_P(s_mode,DRY_P);
+  }
+
+  publishTopic(item->itemArr->name, (long) mode, "/mode");
+
+  if (power & 0x01)
+      publishTopic(item->itemArr->name, s_mode,"/cmd");
+
+  else publishTopic(item->itemArr->name, "OFF","/cmd");
+
+  String raw_str;
+  char raw[75];
+  for (int i=0; i < 37; i++){
+     if (data[i] < 10){
+       raw_str += "0";
+       raw_str += String(data[i], HEX);
+     } else {
+      raw_str += String(data[i], HEX);
+     }
+  }
+  raw_str.toUpperCase();
+  raw_str.toCharArray(raw,75);
+  publishTopic(item->itemArr->name, raw,"/raw");
+  Serial.println(raw);
+
+///////////////////////////////////
+}
+
+byte getCRC(byte req[], size_t size){
+  byte crc = 0;
+  for (int i=2; i < size; i++){
+      crc += req[i];
+  }
+  return crc;
+}
+
+void SendData(byte req[], size_t size){
+  AC_Serial.write(req, size - 1);
+  AC_Serial.write(getCRC(req, size-1));
+  AC_Serial.flush();
+
+ Serial.print("<<");
+  for (int i=0; i < size-1; i++)
+  {
+     if (req[i] < 10){
+       Serial.print("0");
+       Serial.print(req[i], HEX);
+     }
+        else
+             {
+             Serial.print(req[i], HEX);
+             }
+  }
+Serial.println();
+}
+
+inline unsigned char toHex( char ch ){
+   return ( ( ch >= 'A' ) ? ( ch - 'A' + 0xA ) : ( ch - '0' ) ) & 0x0F;
+}
+
+
+
+int  out_AC::Setup()
+{
+Serial.println("AC Init");
+AC_Serial.begin(9600);
+driverStatus = CST_INITIALIZED;
+return 1;
+}
+
+int  out_AC::Stop()
+{
+Serial.println("AC De-Init");
+
+driverStatus = CST_UNKNOWN;
+return 1;
+}
+
+int  out_AC::Status()
+{
+return driverStatus;
+}
+
+int out_AC::isActive()
+{
+return (power & 1);
+}
+
+int out_AC::Poll(short cause)
+{
+if (cause!=POLLING_SLOW) return 0;
+
+long now = millis();
+  if (now - prevPolling > INTERVAL_AC_POLLING) {
+    prevPolling = now;
+    Serial.println ("Polling");
+    SendData(qstn, sizeof(qstn)/sizeof(byte)); //Опрос кондиционера
+  }
+delay(100);
+  if(AC_Serial.available() > 0){
+    AC_Serial.readBytes(data, 37);
+    while(AC_Serial.available()){
+      delay(2);
+      AC_Serial.read();
+    }
+    if (data[36] != inCheck){
+      inCheck = data[36];
+      InsertData(data, 37);
+    }
+  }
+return INTERVAL_POLLING;
+};
+
+int out_AC::Ctrl(short cmd, short n, int * Parameters,  int suffixCode, char* subItem)
+{char s_mode[10];
+ // Some additional Subitems
+       if (strcmp_P(subItem, LOCK_P) == 0) suffixCode = S_LOCK;
+  else if (strcmp_P(subItem, SWING_P) == 0) suffixCode = S_SWING;
+  else if (strcmp_P(subItem, QUIET_P) == 0) suffixCode = S_QUIET;
+  else if (strcmp_P(subItem, RAW_P) == 0) suffixCode = S_RAW;
+
+ //data[B_POWER] = power;
+  //    debugSerial<<F(".");
+      switch(suffixCode)
+      {
+      case S_SET:
+          set_tmp = Parameters[0];
+          if (set_tmp >= 10 && set_tmp <= 30)
+          {
+            data[B_SET_TMP] = set_tmp -16;
+            publishTopic(item->itemArr->name,(long) set_tmp,"/set");
+            }
+      break;
+
+      case S_CMD:
+      s_mode[0]='\0';
+            switch (cmd)
+                {
+                  case CMD_ON:
+                  case CMD_XON:
+                      data[B_POWER] = power;
+                      data[B_POWER] |= 1;
+                      SendData(on, sizeof(on)/sizeof(byte));
+                      publishTopic(item->itemArr->name,"ON","/cmd");
+                      return 1;
+                  break;
+                  case CMD_OFF:
+                  case CMD_HALT:
+                      data[B_POWER] = power;
+                      data[B_POWER] &= ~1;
+                      SendData(off, sizeof(off)/sizeof(byte));
+                      publishTopic(item->itemArr->name,"OFF","/cmd");
+                      return 1;
+                  break;
+                  case CMD_AUTO:
+                      data[B_MODE] = 0;
+                      data[B_POWER] = power;
+                      data[B_POWER] |= 1;
+                      strcpy_P(s_mode,AUTO_P);
+                  break;
+                  case CMD_COOL:
+                      data[B_MODE] = 1;
+                      data[B_POWER] = power;
+                      data[B_POWER] |= 1;
+                      strcpy_P(s_mode,COOL_P);
+                  break;
+                  case CMD_HEAT:
+                      data[B_MODE] = 2;
+                      data[B_POWER] = power;
+                      data[B_POWER] |= 1;
+                      strcpy_P(s_mode,HEAT_P);
+                  break;
+                  case CMD_DRY:
+                      data[B_MODE] = 4;
+                      data[B_POWER] = power;
+                      data[B_POWER] |= 1;
+                      strcpy_P(s_mode,DRY_P);
+                  break;
+                  case CMD_FAN:
+                      data[B_MODE] = 3;
+                      debugSerial<<"fan\n";
+                      data[B_POWER] = power;
+                      data[B_POWER] |= 1;
+                      strcpy_P(s_mode,FAN_ONLY_P);
+                  break;
+                  case CMD_UNKNOWN:
+                  return -1;
+                  break;
+                }
+                publishTopic(item->itemArr->name,s_mode,"/cmd");
+      break;
+
+      case S_FAN:
+      s_mode[0]='\0';
+      switch (cmd)
+      {
+      case CMD_AUTO:
+      data[B_FAN_SPD] = 3;
+      strcpy_P(s_mode,AUTO_P);
+      break;
+      case CMD_HIGH:
+      data[B_FAN_SPD] = 0;
+      strcpy_P(s_mode,HIGH_P);
+      break;
+      case CMD_MED:
+      data[B_FAN_SPD] = 1;
+      strcpy_P(s_mode,MED_P);
+      break;
+      case CMD_LOW:
+      data[B_FAN_SPD] = 2;
+      strcpy_P(s_mode,LOW_P);
+      break;
+      default:
+      if (n) data[B_FAN_SPD] = Parameters[0];
+      //TODO - mapping digits to speed
+      }
+      publishTopic(item->itemArr->name,s_mode,"/fan");
+      break;
+
+      case S_MODE:
+      data[B_MODE]    = Parameters[0];
+      break;
+
+      case S_LOCK:
+      switch (cmd)
+          {
+            case CMD_ON:
+            data[B_LOCK_REM] = 80;
+            break;
+            case CMD_OFF:
+            data[B_LOCK_REM] = 0;
+            break;
+          }
+      break;
+
+      case S_SWING:
+      switch (cmd)
+          {
+            case CMD_ON:
+            data[B_LOCK_REM] = 3;
+            break;
+            case CMD_OFF:
+            data[B_LOCK_REM] = 0;
+            break;
+            default:
+            if (n) data[B_SWING] = Parameters[0];
+          }
+      break;
+
+      case S_QUIET:
+      switch (cmd)
+          {
+            case CMD_ON:
+            data[B_POWER] |= 8;
+            break;
+            case CMD_OFF:
+            data[B_POWER] &= ~8;
+            break;
+          }
+
+
+      break;
+
+      case S_RAW:
+        /*
+      {
+        char buf[75];
+        char hexbyte[3] = {0};
+        strPayload.toCharArray(buf, 75);
+        int octets[sizeof(buf) / 2] ;
+        for (int i=0; i < 76; i += 2){
+          hexbyte[0] = buf[i] ;
+          hexbyte[1] = buf[i+1] ;
+          data[i/2] = (toHex(hexbyte[0]) << 4) | toHex(hexbyte[1]);
+        AC_Serial.write(data, 37);
+        AC_Serial.flush();
+        publishTopic("RAW", buf);
+      }
+      */
+
+      break;
+
+      case S_NOTFOUND:
+      return -1;
+
+   }
+
+/*
+    //////////
+
+    if (strTopic == "/myhome/in/Conditioner/Swing"){
+       if (strPayload == "off"){
+        data[B_SWING] = 0;
+      }
+      if (strPayload == "ud"){
+          data[B_SWING] = 1;
+      }
+      if (strPayload == "lr"){
+          data[B_SWING] = 2;
+      }
+      if (strPayload == "all"){
+          data[B_SWING] = 3;
+      }
+    }
+    ////////
+
+    */
+
+    //if (strTopic == "/myhome/in/Conditioner/RAW")
+
+    data[B_CMD] = 0;
+    data[9] = 1;
+    data[10] = 77;
+    data[11] = 95;
+    SendData(data, sizeof(data)/sizeof(byte));
+    //InsertData(data, sizeof(data)/sizeof(byte));
+
+    return 1;
+}
+
+
+
+#endif

lighthub/modules/out_ac.h

@@ -0,0 +1,37 @@
+
+#pragma once
+#ifndef AC_DISABLE
+#include <abstractout.h>
+
+#define LEN_B   37
+#define B_CUR_TMP   13  //Текущая температура
+#define B_CMD       17  // 00-команда 7F-ответ ???
+#define B_MODE      23  //04 - DRY, 01 - cool, 02 - heat, 00 - smart 03 - вентиляция
+#define B_FAN_SPD   25  //Скорость 02 - min, 01 - mid, 00 - max, 03 - auto
+#define B_SWING     27  //01 - верхний и нижний предел вкл. 00 - выкл. 02 - левый/правый вкл. 03 - оба вкл
+#define B_LOCK_REM  28  //80 блокировка вкл. 00 -  выкл
+#define B_POWER     29  //on/off 01 - on, 00 - off (10, 11)-Компрессор??? 09 - QUIET
+#define B_FRESH     31  //fresh 00 - off, 01 - on
+#define B_SET_TMP   35  //Установленная температура
+
+#define S_LOCK S_ADDITIONAL+1
+#define S_QUIET S_ADDITIONAL+2
+#define S_SWING S_ADDITIONAL+3
+#define S_RAW S_ADDITIONAL+4
+
+extern void modbusIdle(void) ;
+class out_AC : public abstractOut {
+public:
+
+    out_AC(Item * _item):abstractOut(_item){};
+    int Setup() override;
+    int Poll(short cause) override;
+    int Stop() override;
+    int Status() override;
+    int isActive() override;
+    int Ctrl(short cmd, short n=0, int * Parameters=NULL,  int suffixCode=0, char* subItem=NULL) override;
+
+protected:
+    void InsertData(byte data[], size_t size);
+};
+#endif

lighthub/modules/out_modbus.cpp

@@ -0,0 +1,412 @@
+#ifndef MBUS_DISABLE
+
+#include "modules/out_modbus.h"
+#include "Arduino.h"
+#include "options.h"
+#include "utils.h"
+#include "Streaming.h"
+
+#include "item.h"
+#include <ModbusMaster.h>
+#include "main.h"
+#include <HardwareSerial.h>
+
+extern aJsonObject *modbusObj;
+extern ModbusMaster node;
+extern short modbusBusy;
+extern void modbusIdle(void) ;
+
+struct reg_t
+{
+  const char verb[4];
+  const uint8_t id;
+};
+
+struct serial_t
+{
+  const char verb[4];
+  const uint16_t mode;
+};
+
+#define PAR_I16 1
+#define PAR_I32 2
+#define PAR_U16 3
+#define PAR_U32 4
+#define PAR_I8H 5
+#define PAR_I8L 6
+#define PAR_U8H 7
+#define PAR_U8L 8
+
+
+const reg_t regSize_P[] PROGMEM =
+{
+  { "i16", (uint8_t) PAR_I16 },
+  { "i32", (uint8_t) PAR_I32 },
+  { "u16", (uint8_t) PAR_U16 },
+  { "u32", (uint8_t) PAR_U32 },
+  { "i8h", (uint8_t) PAR_I8H },
+  { "i8l", (uint8_t) PAR_I8L },
+  { "u8h", (uint8_t) PAR_U8H },
+  { "u8l", (uint8_t) PAR_U8L }
+} ;
+#define regSizeNum sizeof(regSize_P)/sizeof(reg_t)
+
+const serial_t serialModes_P[] PROGMEM =
+{
+  { "8E1", (uint16_t) SERIAL_8E1},//(uint16_t) US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_EVEN },
+  { "8N1", (uint16_t) SERIAL_8N1},
+  { "8E2", (uint16_t) SERIAL_8E2},
+  { "8N2", (uint16_t) SERIAL_8N2},
+  { "8O1", (uint16_t) SERIAL_8O1},
+  { "8O2", (uint16_t) SERIAL_8O2},
+//  { "8M1", SERIAL_8M1},
+//  { "8S1", SERIAL_8S1},
+  { "7E1", (uint16_t) SERIAL_7E1},//(uint16_t) US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_EVEN },
+  { "7N1", (uint16_t) SERIAL_7N1},
+  { "7E2", (uint16_t) SERIAL_7E2},
+  { "7N2", (uint16_t) SERIAL_7N2},
+  { "7O1", (uint16_t) SERIAL_7O1},
+  { "7O2", (uint16_t) SERIAL_7O2}
+//  { "7M1", SERIAL_7M1},
+//  { "7S1", SERIAL_7S1}
+} ;
+
+#define serialModesNum sizeof(serialModes_P)/sizeof(serial_t)
+
+uint16_t  str2SerialParam(char * str)
+{ debugSerial<<str<<F(" =>");
+  for(uint8_t i=0; i<serialModesNum && str;i++)
+      if (strcmp_P(str, serialModes_P[i].verb) == 0)
+           {
+
+           debugSerial<< i << F(" ") << pgm_read_word_near(&serialModes_P[i].mode)<< endl;
+           return pgm_read_word_near(&serialModes_P[i].mode);
+         }
+  debugSerial<< F("Default serial mode N81 used");
+  return static_cast<uint16_t> (SERIAL_8N1);
+}
+int  str2regSize(char * str)
+{
+  for(uint8_t i=0; i<regSizeNum && str;i++)
+      if (strcmp_P(str, regSize_P[i].verb) == 0)
+           return pgm_read_byte_near(&regSize_P[i].id);
+  return (int) PAR_I16;
+}
+
+bool out_Modbus::getConfig()
+{
+  // Retrieve and store template values from global modbus settings
+  if (!store || !item || !item->itemArg || (item->itemArg->type != aJson_Array) || aJson.getArraySize(item->itemArg)<2)
+  {
+    errorSerial<<F("MBUS: config failed:")<<(bool)store<<F(",")<<(bool)item<<F(",")<<(bool)item->itemArg<<F(",")<<(item->itemArg->type != aJson_Array)<<F(",")<< (aJson.getArraySize(item->itemArg)<2)<<endl;
+    return false;
+  }
+  aJsonObject * templateIdObj = aJson.getArrayItem(item->itemArg, 1);
+  if (templateIdObj->type != aJson_String || !templateIdObj->valuestring)
+            {
+              errorSerial<<F("Invalid template.")<<endl;
+              return false;
+            }
+  aJsonObject * templateObj = aJson.getObjectItem(modbusObj, templateIdObj->valuestring);
+  if (! templateObj)
+            {
+              errorSerial<<F("Modbus template not found: ")<<templateIdObj->valuestring<<endl;
+              return false;
+            }
+
+  aJsonObject * serialParamObj=aJson.getObjectItem(templateObj, "serial");
+  if (serialParamObj && serialParamObj->type == aJson_String) store->serialParam = str2SerialParam(serialParamObj->valuestring);
+     else store->serialParam = SERIAL_8N1;
+
+  aJsonObject * baudObj=aJson.getObjectItem(templateObj, "baud");
+  if (baudObj && baudObj->type == aJson_Int && baudObj->valueint) store->baud = baudObj->valueint;
+     else store->baud = 9600;
+  aJsonObject * pollObj=aJson.getObjectItem(templateObj, "poll");
+  if (pollObj && pollObj->type == aJson_Object)
+    {
+      store->pollingRegisters=aJson.getObjectItem(pollObj, "regs");
+      store->pollingInterval =aJson.getObjectItem(pollObj, "delay")->valueint;
+    }
+  else {store->pollingRegisters=NULL;store->pollingInterval = 1000;}
+
+  store->parameters=aJson.getObjectItem(templateObj, "par");
+  return true;
+  //store->addr=item->getArg(0);
+  }
+
+
+int  out_Modbus::Setup()
+{
+if (!store) store= (mbPersistent *)item->setPersistent(new mbPersistent);
+if (!store)
+              { errorSerial<<F("MBUS: Out of memory")<<endl;
+                return 0;}
+
+store->timestamp=millis();
+if (getConfig())
+    {
+        //item->clearFlag(ACTION_NEEDED);
+        //item->clearFlag(ACTION_IN_PROCESS);
+        infoSerial<<F("Modbus config loaded ")<< item->itemArr->name<<endl;
+        store->driverStatus = CST_INITIALIZED;
+        return 1;
+      }
+else
+ {  errorSerial<<F("Modbus config error")<<endl;
+    store->driverStatus = CST_FAILED;
+    return 0;
+  }
+
+}
+
+int  out_Modbus::Stop()
+{
+Serial.println("Modbus De-Init");
+
+delete store;
+item->setPersistent(NULL);
+store = NULL;
+return 1;
+}
+
+int  out_Modbus::Status()
+{
+if (store)
+    return store->driverStatus;
+return CST_UNKNOWN;
+}
+
+int out_Modbus::isActive()
+{
+return item->getVal();
+}
+
+
+bool readModbus(uint16_t reg, int regType, int count)
+{
+uint8_t result;
+switch (regType) {
+    case MODBUS_HOLDING_REG_TYPE:
+        result = node.readHoldingRegisters(reg, count);
+        break;
+    case MODBUS_COIL_REG_TYPE:
+        result = node.readCoils(reg, count);
+        break;
+    case MODBUS_DISCRETE_REG_TYPE:
+        result = node.readDiscreteInputs(reg, count);
+        break;
+    case MODBUS_INPUT_REG_TYPE:
+        result = node.readInputRegisters(reg, count);
+        break;
+    default:
+        debugSerial<<F("Not supported reg type\n");
+ }
+if (result != node.ku8MBSuccess) errorSerial<<F("MBUS: Polling error")<<endl;
+return (result == node.ku8MBSuccess);
+}
+
+
+
+int out_Modbus::findRegister(int registerNum, int posInBuffer)
+{
+  aJsonObject * paramObj = store->parameters->child;
+  bool is8bit = false;
+  while (paramObj)
+          {
+            aJsonObject *regObj = aJson.getObjectItem(paramObj, "reg");
+            if (regObj && regObj->valueint ==registerNum)
+                    {
+                    aJsonObject *typeObj = aJson.getObjectItem(paramObj, "type");
+                    aJsonObject *mapObj = aJson.getObjectItem(paramObj, "map");
+                    aJsonObject * itemParametersObj = aJson.getArrayItem(item->itemArg, 2);
+                    uint16_t data = node.getResponseBuffer(posInBuffer);
+                    int8_t    regType = PAR_I16;
+                    uint32_t  param =0;
+                    itemCmd   mappedParam;
+                    bool isSigned=false;
+                    if (typeObj && typeObj->type == aJson_String) regType=str2regSize(typeObj->valuestring);
+                    switch(regType) {
+
+                      case PAR_I16:
+                      isSigned=true;
+                      case PAR_U16:
+                      param=data;
+                      break;
+                      case PAR_I32:
+                      isSigned=true;
+                      case PAR_U32:
+                      param = data | (node.getResponseBuffer(posInBuffer+1)<<16);
+                      break;
+                      case PAR_U8L:
+                      is8bit=true;
+                      param = data & 0xFF;
+                      break;
+                      case PAR_U8H:
+                      is8bit=true;
+                      param = data << 8;
+                    }
+
+                    if (mapObj && (mapObj->type==aJson_Array || mapObj->type==aJson_Object))
+                       mappedParam = mapInt(param,mapObj);
+                    else  mappedParam.Int(param);
+
+                    if (itemParametersObj && itemParametersObj->type ==aJson_Object)
+                          {
+                          aJsonObject *execObj = aJson.getObjectItem(itemParametersObj,paramObj->name);
+                          if (execObj) executeCommand(execObj, -1, mappedParam);
+                          }
+                    debugSerial << F("MB got ")<<param<< F(" from ")<<regType<<F(":")<<paramObj->name<<endl;
+
+                    if (!is8bit) return 1;
+                    }
+            paramObj=paramObj->next;
+          }
+return is8bit;
+}
+
+int out_Modbus::Poll(short cause)
+{
+if (store->pollingRegisters && !modbusBusy && (Status() == CST_INITIALIZED) && isTimeOver(store->timestamp,millis(),store->pollingInterval))
+  {
+    debugSerial<<F("Poll ")<< item->itemArr->name << endl;
+    modbusBusy=1;
+    //store->serialParam=(USARTClass::USARTModes) SERIAL_8N1;
+    #if defined (__SAM3X8E__)
+    modbusSerial.begin(store->baud, static_cast <USARTClass::USARTModes> (store->serialParam));
+    #elif defined (ARDUINO_ARCH_ESP8266)
+    modbusSerial.begin(store->baud, static_cast <SerialConfig>(store->serialParam));
+    #else
+    modbusSerial.begin(store->baud, (store->serialParam));
+    #endif
+    debugSerial<< store->baud << F("---")<< store->serialParam<<endl;
+    node.begin(item->getArg(0), modbusSerial);
+
+    aJsonObject * reg = store->pollingRegisters->child;
+    while (reg)
+            {
+            switch (reg->type)
+              {
+                case aJson_Int:
+                {
+                int registerNum = reg->valueint;
+                if (readModbus(registerNum,MODBUS_HOLDING_REG_TYPE,1))
+                  {
+                    findRegister(registerNum,0);
+                //    data = node.getResponseBuffer(j);
+                  }
+                }
+                break;
+                case aJson_Array:
+                if (aJson.getArraySize(reg)==2)
+                {
+                  int registerFrom=aJson.getArrayItem(reg, 0)->valueint;
+                  int registerTo=aJson.getArrayItem(reg, 1)->valueint;
+
+                  if (readModbus(registerFrom,MODBUS_HOLDING_REG_TYPE,registerTo-registerFrom+1))
+                    {
+                      for(int i=registerFrom;i<=registerTo;i++)
+                        {
+                          findRegister(i,i-registerFrom);
+                        }
+                      //data = node.getResponseBuffer(j);
+                    }
+
+                }
+
+              }
+            reg = reg->next;
+            }
+
+  store->timestamp=millis();
+  debugSerial<<F("endPoll ")<< item->itemArr->name << endl;
+
+  //Non blocking waiting to release line
+  uint32_t time = millis()+50;
+  while (millis()<time)
+             modbusIdle();
+
+  modbusBusy =0;
+  }
+
+return store->pollingInterval;
+};
+
+int out_Modbus::getChanType()
+{
+   return CH_MODBUS;
+}
+
+
+
+int out_Modbus::Ctrl(short cmd, short n, int * Parameters,  int suffixCode, char* subItem)
+{
+int chActive = item->isActive();
+bool toExecute = (chActive>0);
+long st;
+if (cmd>0 && !suffixCode) suffixCode=S_CMD; //if some known command find, but w/o correct suffix - got it
+
+//item->setFlag(ACTION_NEEDED);
+
+switch(suffixCode)
+{
+case S_NOTFOUND:
+  // turn on  and set
+toExecute = true;
+debugSerial<<F("Forced execution");
+case S_SET:
+          if (!Parameters || n==0) return 0;
+          item->setVal(st=Parameters[0]); //Store
+          if (!suffixCode)
+          {
+            if (chActive>0 && !st) item->setCmd(CMD_OFF);
+            if (chActive==0 && st) item->setCmd(CMD_ON);
+            item->SendStatus(SEND_COMMAND | SEND_PARAMETERS | SEND_DEFFERED);
+//            if (item->getExt()) item->setExt(millis()+maxOnTime); //Extend motor time
+          }
+          else    item->SendStatus(SEND_PARAMETERS | SEND_DEFFERED);
+
+          return 1;
+          //break;
+
+case S_CMD:
+      item->setCmd(cmd);
+      switch (cmd)
+          {
+          case CMD_ON:
+           //retrive stored values
+           st = item->getVal();
+
+
+            if (st && (st<MIN_VOLUME) /* && send */) st=INIT_VOLUME;
+            item->setVal(st);
+
+            if (st)  //Stored smthng
+            {
+              item->SendStatus(SEND_COMMAND | SEND_PARAMETERS);
+              debugSerial<<F("Restored: ")<<st<<endl;
+            }
+            else
+            {
+              debugSerial<<st<<F(": No stored values - default\n");
+              // Store
+              st=100;
+              item->setVal(st);
+              item->SendStatus(SEND_COMMAND | SEND_PARAMETERS );
+            }
+  //          if (item->getExt()) item->setExt(millis()+maxOnTime); //Extend motor time
+            return 1;
+
+            case CMD_OFF:
+              item->SendStatus(SEND_COMMAND);
+  //            if (item->getExt()) item->setExt(millis()+maxOnTime); //Extend motor time
+            return 1;
+
+} //switch cmd
+
+break;
+} //switch suffix
+debugSerial<<F("Unknown cmd")<<endl;
+return 0;
+}
+
+#endif

lighthub/modules/out_modbus.h

@@ -0,0 +1,42 @@
+#pragma once
+#include "options.h"
+#ifndef MBUS_DISABLE
+#include <abstractout.h>
+#include <item.h>
+
+
+class mbPersistent : public chPersistent  {
+
+public:
+//  int addr
+  int8_t driverStatus;
+  int baud;
+  uint16_t serialParam;
+  uint16_t pollingInterval;
+  uint32_t timestamp;
+  aJsonObject * pollingRegisters;
+  aJsonObject * parameters;
+
+};
+
+
+
+class out_Modbus : public abstractOut {
+public:
+
+    out_Modbus(Item * _item):abstractOut(_item){store = (mbPersistent *) item->getPersistent();};
+    int Setup() override;
+    int Poll(short cause) override;
+    int Stop() override;
+    int Status() override;
+    int isActive() override;
+    int getChanType() override;
+    int Ctrl(short cmd, short n=0, int * Parameters=NULL, int suffixCode=0, char* subItem=NULL) override;
+
+
+protected:
+    mbPersistent * store;
+    bool getConfig();
+    int findRegister(int registerNum, int posInBuffer);
+};
+#endif

lighthub/modules/out_motor.cpp

@@ -0,0 +1,285 @@
+#ifndef MOTOR_DISABLE
+
+#include "modules/out_motor.h"
+#include "Arduino.h"
+#include "options.h"
+#include "Streaming.h"
+
+#include "item.h"
+#include "main.h"
+
+static int driverStatus = CST_UNKNOWN;
+
+void out_Motor::getConfig()
+{
+  pinUp=item->getArg(0);
+  if(pinUp<=0 || pinUp>=PINS_COUNT) pinUp=32;
+
+  pinDown=item->getArg(1);
+  if (pinDown<=0 || pinDown>=PINS_COUNT) pinDown=33;
+
+  pinFeedback=item->getArg(2);
+  if (pinFeedback<0 || pinFeedback>=PINS_COUNT) pinFeedback=0;
+
+  feedbackOpen=item->getArg(3);
+  if (feedbackOpen<=0 || feedbackOpen>1024) feedbackOpen=0;
+
+  feedbackClosed=item->getArg(4);
+  if (feedbackClosed<0 || feedbackClosed>1024) feedbackClosed=1024;
+
+  maxOnTime=item->getArg(5);
+  if (maxOnTime<=0) maxOnTime=10000;
+  }
+
+
+int  out_Motor::Setup()
+{
+getConfig();
+Serial.println("Motor Init");
+pinMode(pinUp,OUTPUT);
+pinMode(pinDown,OUTPUT);
+digitalWrite(pinUp,LOW);
+digitalWrite(pinDown,LOW);
+pinMode(pinFeedback, INPUT);
+item->setExt(0);
+item->clearFlag(ACTION_NEEDED);
+item->clearFlag(ACTION_IN_PROCESS);
+driverStatus = CST_INITIALIZED;
+motorQuote = MOTOR_QUOTE;
+return 1;
+}
+
+int  out_Motor::Stop()
+{
+Serial.println("Motor De-Init");
+digitalWrite(pinUp,LOW);
+digitalWrite(pinDown,LOW);
+item->setExt(0);
+driverStatus = CST_UNKNOWN;
+return 1;
+}
+
+int  out_Motor::Status()
+{
+return driverStatus;
+}
+
+int out_Motor::isActive()
+{
+return item->getVal();
+}
+
+int out_Motor::Poll(short cause)
+{
+int curPos = -1;
+int targetPos = -1;
+int dif;
+if (!item->getFlag(ACTION_NEEDED)) return 0;
+
+if (!item->getFlag(ACTION_IN_PROCESS))
+    {
+    if (motorQuote)
+      {
+        item->setFlag(ACTION_IN_PROCESS);
+        motorQuote--;
+      }
+    else return 0;
+    }
+
+uint32_t motorOfftime = item->getExt();
+
+switch (item->getCmd())
+{
+  case CMD_ON:
+  case CMD_XON:
+  targetPos = item->getVal();
+  break;
+
+  case CMD_OFF:
+  case CMD_HALT:
+  targetPos = 0;
+  break;
+}
+
+if (pinFeedback && isAnalogPin(pinFeedback))
+{
+curPos=map(analogRead(pinFeedback),feedbackClosed,feedbackOpen,0,100);
+if (curPos<0) curPos=0;
+if (curPos>100) curPos=100;
+}
+
+if (motorOfftime && motorOfftime<millis()) //Time over
+  {dif = 0; debugSerial<<F("Motor timeout")<<endl;}
+else if (curPos>=0)
+  dif=targetPos-curPos;
+else
+  dif=targetPos-50; // Have No feedback
+
+
+
+if (dif<-POS_ERR)
+{
+
+  digitalWrite(pinDown,LOW);
+  if (!item->getExt())item->setExt(millis()+maxOnTime);
+
+  //
+  //PINS_COUNT
+  //PIN_ATTR_ANALOG
+  //  uint32_t attr = g_APinDescription[pinUp].ulPinAttribute;
+  //  if ((attr & PIN_ATTR_PWM) == PIN_ATTR_PWM) ;
+#ifndef ESP32
+if (digitalPinHasPWM(pinUp))
+    {
+//Serial.println("pinUP PWM");
+      int velocity = map(-dif, 0, 10, 0, 255);
+      if (velocity>255) velocity=255;
+      if (velocity<0) velocity=0;
+      analogWrite(pinUp,velocity);
+    }
+
+else if (digitalPinHasPWM(pinDown))
+        {
+  //        Serial.println("pinDown PWM fallback");
+          digitalWrite(pinUp,HIGH);
+          int velocity = map(-dif, 0, 10, 255, 0);
+          if (velocity>255) velocity=255;
+          if (velocity<0) velocity=0;
+          analogWrite(pinDown,velocity);
+        }
+else
+#endif
+   {
+  //   Serial.print(pinUp);
+  //   Serial.println(" pinUP noPWM");
+     digitalWrite(pinUp,HIGH);
+   }
+}
+else
+
+if (dif>POS_ERR)
+{
+digitalWrite(pinUp,LOW);
+
+if (!item->getExt()) item->setExt(millis()+maxOnTime);
+#ifndef ESP32
+if (digitalPinHasPWM(pinDown))
+{
+  //Serial.println("pinDown PWM");
+  int velocity = map(dif, 0, 10, 0, 255);
+  if (velocity>255) velocity=255;
+  if (velocity<0) velocity=0;
+  analogWrite(pinDown,velocity);
+}
+else
+if (digitalPinHasPWM(pinUp))
+{
+  //Serial.println("pinUP PWM fallback");
+  digitalWrite(pinDown,HIGH);
+  int velocity = map(dif, 0, 10, 255, 0);
+  if (velocity>255) velocity=255;
+  if (velocity<0) velocity=0;
+  analogWrite(pinUp,velocity);
+}
+else
+#endif
+{
+  //Serial.print(pinDown);
+  //Serial.println(" pinDown noPWM");
+ digitalWrite(pinDown,HIGH);
+}
+
+}
+else //Target zone
+{ Serial.println("Target");
+  digitalWrite(pinUp,LOW);
+  digitalWrite(pinDown,LOW);
+  item->setExt(0);
+  item->clearFlag(ACTION_NEEDED);
+  item->clearFlag(ACTION_IN_PROCESS);
+  motorQuote++;
+}
+
+
+return 0;
+};
+
+int out_Motor::getChanType()
+{
+   return CH_PWM;
+}
+
+
+
+int out_Motor::Ctrl(short cmd, short n, int * Parameters,  int suffixCode, char* subItem)
+{
+int chActive = item->isActive();
+bool toExecute = (chActive>0);
+long st;
+if (cmd>0 && !suffixCode) suffixCode=S_CMD; //if some known command find, but w/o correct suffix - got it
+
+item->setFlag(ACTION_NEEDED);
+
+switch(suffixCode)
+{
+case S_NOTFOUND:
+  // turn on  and set
+toExecute = true;
+debugSerial<<F("Forced execution");
+case S_SET:
+          if (!Parameters || n==0) return 0;
+          item->setVal(st=Parameters[0]); //Store
+          if (!suffixCode)
+          {
+            if (chActive>0 && !st) item->setCmd(CMD_OFF);
+            if (chActive==0 && st) item->setCmd(CMD_ON);
+            item->SendStatus(SEND_COMMAND | SEND_PARAMETERS | SEND_DEFFERED);
+            if (item->getExt()) item->setExt(millis()+maxOnTime); //Extend motor time
+          }
+          else    item->SendStatus(SEND_PARAMETERS | SEND_DEFFERED);
+
+          return 1;
+          //break;
+
+case S_CMD:
+      item->setCmd(cmd);
+      switch (cmd)
+          {
+          case CMD_ON:
+           //retrive stored values
+           st = item->getVal();
+
+
+            if (st && (st<MIN_VOLUME) /* && send */) st=INIT_VOLUME;
+            item->setVal(st);
+
+            if (st)  //Stored smthng
+            {
+              item->SendStatus(SEND_COMMAND | SEND_PARAMETERS);
+              debugSerial<<F("Restored: ")<<st<<endl;
+            }
+            else
+            {
+              debugSerial<<st<<F(": No stored values - default\n");
+              // Store
+              st=100;
+              item->setVal(st);
+              item->SendStatus(SEND_COMMAND | SEND_PARAMETERS );
+            }
+            if (item->getExt()) item->setExt(millis()+maxOnTime); //Extend motor time
+            return 1;
+
+            case CMD_OFF:
+              item->SendStatus(SEND_COMMAND);
+              if (item->getExt()) item->setExt(millis()+maxOnTime); //Extend motor time
+            return 1;
+
+} //switch cmd
+
+break;
+} //switch suffix
+debugSerial<<F("Unknown cmd")<<endl;
+return 0;
+}
+
+#endif

lighthub/modules/out_motor.h

@@ -0,0 +1,39 @@
+#pragma once
+#include "options.h"
+#ifndef MOTOR_DISABLE
+#include <abstractout.h>
+#include <item.h>
+
+#ifndef POS_ERR
+#define POS_ERR 2
+#endif
+
+// The number of simultaniusly working motors
+#ifndef MOTOR_QUOTE
+#define MOTOR_QUOTE 2
+#endif
+
+static int8_t motorQuote = MOTOR_QUOTE;
+
+class out_Motor : public abstractOut {
+public:
+
+    out_Motor(Item * _item):abstractOut(_item){getConfig();};
+    int Setup() override;
+    int Poll(short cause) override;
+    int Stop() override;
+    int Status() override;
+    int isActive() override;
+    int getChanType() override;
+    int Ctrl(short cmd, short n=0, int * Parameters=NULL,  int suffixCode=0, char* subItem=NULL) override;
+
+    int8_t pinUp;
+    int8_t pinDown;
+    int8_t pinFeedback;
+    int16_t maxOnTime;
+    uint16_t feedbackOpen;
+    uint16_t feedbackClosed;
+protected:
+    void getConfig();
+};
+#endif

lighthub/modules/out_spiled.cpp

@@ -0,0 +1,336 @@
+#ifndef SPILED_DISABLE
+
+#include "modules/out_spiled.h"
+#include "Arduino.h"
+#include "options.h"
+#include "Streaming.h"
+
+#include "item.h"
+#include "main.h"
+
+#ifdef ADAFRUIT_LED
+
+#include <Adafruit_NeoPixel.h>
+#ifdef __AVR__
+ #include <avr/power.h> // Required for 16 MHz Adafruit Trinket
+#endif
+Adafruit_NeoPixel *leds = NULL;
+
+#else
+#include "FastLED.h"
+static CRGB *leds = NULL;
+
+#endif
+
+#define NUM_LEDS 43
+
+static int driverStatus = CST_UNKNOWN;
+
+void out_SPILed::getConfig()
+{
+  pin=item->getArg(0);
+  if(pin<=0) pin=3;
+
+  numLeds=item->getArg(1);
+  if (numLeds<=0) numLeds=NUM_LEDS;
+
+  ledsType=item->getArg(2);
+  #ifdef ADAFRUIT_LED
+  if (ledsType<=0) ledsType= NEO_BRG + NEO_KHZ800;
+  #endif
+}
+
+
+int  out_SPILed::Setup()
+{
+getConfig();
+Serial.println("SPI-LED Init");
+
+if (!leds)
+{
+#ifdef ADAFRUIT_LED
+#if defined(__AVR_ATtiny85__) && (F_CPU == 16000000)
+  clock_prescale_set(clock_div_1);
+#endif
+leds = new Adafruit_NeoPixel(numLeds, pin, ledsType);
+leds->begin();
+#else
+leds = new CRGB [numLeds]; //Allocate dynamic memory for LED objects
+//template< CONTROLLER = TM1809, uint8_t DATA_PIN = pin, EOrder ORDER = BRG >
+//FastLED.addLeds<TM1809, pin, BRG>(leds, numLeds);
+FastLED.addLeds<CONTROLLER, DATA_PIN, ORDER>(leds, numLeds);
+#endif
+}
+
+driverStatus = CST_INITIALIZED;
+return 1;
+}
+
+int  out_SPILed::Stop()
+{
+Serial.println("SPI-LED De-Init");
+//FastLED.addLeds<TM1809, DATA_PIN, BRG>(leds, NUM_LEDS);
+#ifdef ADAFRUIT_LED
+leds->clear();
+delete leds;
+#else
+FastLED.clear(true);
+delete [] leds;
+#endif
+driverStatus = CST_UNKNOWN;
+
+return 1;
+}
+
+int  out_SPILed::Status()
+{
+return driverStatus;
+}
+
+int out_SPILed::isActive()
+{
+itemStore st;
+st.aslong = item->getVal(); //Restore old params
+debugSerial<< F(" val:")<<st.v<<endl;
+return st.v;
+}
+
+int out_SPILed::Poll(short cause)
+{
+return 0;
+};
+
+int out_SPILed::getChanType()
+{
+  if  ((ledsType>>4) == (ledsType>>6))
+   return CH_RGB;
+  else
+   return CH_RGBW;
+}
+
+int out_SPILed::PixelCtrl(itemStore *st, short cmd, int from, int to, bool show, bool rgb)
+{
+  //debugSerial<<F("cmd: ")<<cmd<<endl;
+#ifdef ADAFRUIT_LED
+uint32_t pixel;
+#else
+CRGB pixel;
+#endif
+  if (!rgb)
+  {
+  int Saturation = map(st->s, 0, 100, 0, 255);
+  int Value      = map(st->v, 0, 100, 0, 255);
+
+#ifdef ADAFRUIT_LED
+  uint16_t Hue        = map(st->h, 0, 365, 0, 65535);
+  pixel      = leds->ColorHSV(Hue, Saturation, Value);
+#else
+  int Hue        = map(st->h, 0, 365, 0, 255);
+  pixel      = CHSV(Hue, Saturation, Value);
+#endif
+
+  debugSerial<<F("hsv: ")<<st->h<<F(",")<<st->s<<F(",")<<st->v<<endl;
+  }
+  if (to>numLeds-1) to=numLeds-1;
+  if (from<0) from=0;
+
+  for (int i=from;i<=to;i++)
+  {
+    switch (cmd) {
+      case CMD_ON:
+
+      #ifdef ADAFRUIT_LED
+      if (!leds->getPixelColor(i)) leds->setPixelColor(i, leds->Color(255, 255, 255));
+      #else
+      if (!leds[i].r && !leds[i].g &&!leds[i].b) leds[i] = CRGB::White;
+      #endif
+
+
+      break;
+      case CMD_OFF:
+       #ifdef ADAFRUIT_LED
+       leds->setPixelColor(i, leds->Color(0, 0, 0));
+       #else
+       leds[i] = CRGB::Black;
+       #endif
+
+       break;
+      default:
+    if (rgb)
+    {
+    #ifdef ADAFRUIT_LED
+      leds->setPixelColor(i, leds->Color(st->r,st->g,st->b));
+    #else
+      leds[i] = CRGB(st->r,st->g,st->b);
+    #endif
+    }
+    else
+    {
+    #ifdef ADAFRUIT_LED
+      leds->setPixelColor(i, pixel);
+    #else
+      leds[i] = pixel;
+    #endif
+
+    }
+
+   }
+  } //for
+     if (show)
+          {
+          #ifdef ADAFRUIT_LED
+          leds->show();
+          #else
+          FastLED.show();
+          #endif
+
+          debugSerial<<F("Show")<<endl;
+          }
+return 1;
+}
+
+int out_SPILed::Ctrl(short cmd, short n, int * Parameters,  int suffixCode, char* subItem)
+{
+int chActive = item->isActive();
+bool toExecute = (chActive>0);
+itemStore st;
+if (cmd>0 && !suffixCode) suffixCode=S_CMD; //if some known command find, but w/o correct suffix - got it
+
+int from=0, to=numLeds-1; //All LEDs on the strip by default
+// retrive LEDs range from suffix
+if (subItem)
+{ //Just single LED to control todo - range
+//  debugSerial<<F("Range:")<<subItem<<endl;
+  if (sscanf(subItem,"%d-%d",&from,&to) == 1) to=from;
+}
+debugSerial<<from<<F("-")<<to<<F(" cmd=")<<cmd<<endl;
+
+
+switch(suffixCode)
+{
+case S_NOTFOUND:
+  // turn on  and set
+toExecute = true;
+case S_SET:
+case S_HSV:
+          st.aslong = item->getVal(); //Restore old params
+          switch (n) //How many parameters are passed?
+          {
+            case 1:
+            st.v = Parameters[0]; //Volume only
+            if (!st.hsv_flag)
+              {
+                st.h = 0; //Filling by default
+                st.s = 0;
+                st.hsv_flag = 1; // Mark stored vals as HSV
+              }
+            break;
+            case 2: // Just hue and saturation
+              st.h = Parameters[0];
+              st.s = Parameters[1];
+              st.hsv_flag = 1;
+            break;
+            case 3: //complete triplet
+            st.h = Parameters[0];
+            st.s = Parameters[1];
+            st.v = Parameters[2];
+            st.hsv_flag = 1;
+          }
+          PixelCtrl(&st,0,from,to,toExecute);
+
+          if (!subItem) //Whole strip
+          {
+          item->setVal(st.aslong); //Store
+          if (!suffixCode)
+          {
+            if (chActive>0 && !st.v) item->setCmd(CMD_OFF);
+            if (chActive==0 && st.v) item->setCmd(CMD_ON);
+            item->SendStatus(SEND_COMMAND | SEND_PARAMETERS | SEND_DEFFERED);
+          }
+          else    item->SendStatus(SEND_PARAMETERS | SEND_DEFFERED);
+          }
+          return 1;
+          //break;
+case S_RGB:
+  st.r = Parameters[0];
+  st.g = Parameters[1];
+  st.b = Parameters[2];
+  st.w = 0;
+  st.hsv_flag = 0;
+PixelCtrl(&st,0,from,to,toExecute,true);
+//item->setVal(st.aslong); //Store
+if (!suffixCode)
+{
+  if (chActive>0 && !st.aslong) item->setCmd(CMD_OFF);
+  if (chActive==0 && st.aslong) item->setCmd(CMD_ON);
+  item->SendStatus(SEND_COMMAND | SEND_PARAMETERS | SEND_DEFFERED);
+}
+else    item->SendStatus(SEND_PARAMETERS | SEND_DEFFERED);
+return 1;
+//break;
+case S_CMD:
+      item->setCmd(cmd);
+      switch (cmd)
+          {
+          case CMD_ON:
+
+            /*
+            if (chActive>0 && send)
+                               {
+                                 SendStatus(SEND_COMMAND);
+                                 return 1;
+                               }
+            */
+           //retrive stored values
+           st.aslong = item->getVal();
+
+           if (subItem) // LED range, not whole strip
+                      PixelCtrl(&st,CMD_ON,from,to);
+           else  //whole strip
+            {
+            if (st.aslong && (st.v<MIN_VOLUME) /* && send */) st.v=INIT_VOLUME;
+            item->setVal(st.aslong);
+
+            if (st.aslong )  //Stored smthng
+            {
+              item->SendStatus(SEND_COMMAND | SEND_PARAMETERS);
+              debugSerial<<F("Restored: ")<<st.h<<F(",")<<st.s<<F(",")<<st.v<<endl;
+            }
+            else
+            {
+              debugSerial<<st.aslong<<F(": No stored values - default\n");
+              st.h = 100;
+              st.s = 0;
+              st.v = 100;
+              st.hsv_flag=1;
+              // Store
+              item->setVal(st.aslong);
+              item->SendStatus(SEND_COMMAND | SEND_PARAMETERS );
+            }
+
+            PixelCtrl(&st,0,from,to);
+            }
+
+            return 1;
+
+            case CMD_OFF:
+            if (subItem) // LED range, not whole strip
+            PixelCtrl(&st,CMD_OFF,from,to);
+            else
+            {
+              st.v=0;
+              PixelCtrl(&st,0,from,to);
+              item->SendStatus(SEND_COMMAND);
+              //  if (send) item->publishTopic(item->itemArr->name,"OFF","/cmd");
+            }
+            return 1;
+
+} //switch cmd
+
+break;
+} //switch suffix
+debugSerial<<F("Unknown cmd")<<endl;
+return 0;
+}
+
+#endif

lighthub/modules/out_spiled.h

@@ -0,0 +1,32 @@
+
+#pragma once
+#include "options.h"
+#ifndef SPILED_DISABLE
+#include <abstractout.h>
+#include <item.h>
+#ifdef ADAFRUIT_LED
+
+#include <Adafruit_NeoPixel.h>
+#else
+#include "FastLED.h"
+#endif
+
+class out_SPILed : public abstractOut {
+public:
+
+    out_SPILed(Item * _item):abstractOut(_item){getConfig();};
+    int Setup() override;
+    int Poll(short cause) override;
+    int Stop() override;
+    int Status() override;
+    int isActive() override;
+    int getChanType() override;
+    int Ctrl(short cmd, short n=0, int * Parameters=NULL,  int suffixCode=0, char* subItem=NULL) override;
+    int PixelCtrl(itemStore *st, short cmd, int from =0 , int to = 1024, bool show = 1, bool rgb = 0);
+    int numLeds;
+    int8_t pin;
+    int ledsType;
+protected:
+    void getConfig();
+};
+#endif

lighthub/monitor.bat

@@ -0,0 +1 @@
+pio device monitor -b 115200

lighthub/mqtt.cpp

@@ -1,18 +0,0 @@
-/*
-int mqtt::publish(int value)
-{};
-
-int mqtt::publish(float value)
-{
-
-};
-
-int mqtt::publish(char * value)
-{
-  char addrstr[MQTT_TOPIC_LENGTH];
-  aJsonObject *emit = aJson.getObjectItem(in, "emit");
-  strncpy(addrstr,emit->valuestring,sizeof(addrstr));
-  if (!strchr(addrstr,'/')) setTopic(addrstr,sizeof(addrstr),T_OUT,emit->valuestring);
-  if mqttClient.connected() mqttClient.publish(addrstr, value, true);
-};
-*/

lighthub/options.h

@@ -1,13 +1,35 @@
 // Configuration of drivers enabled
-#ifndef PIO_SRC_REV
+#define SYSLOG_LOCAL_SOCKET 514
-#define PIO_SRC_REV v0.999
+
+#ifndef FASTLED
+#define ADAFRUIT_LED
+#endif
+// ADAFRUIT library allow to dynamically configure SPI LED Strip Parameters
+
+// If not defined ADAFRUIT_LED - FastLED library will be used instead
+// And strip type, pin, order must defined on compilation time
+#ifndef CONTROLLER
+#define CONTROLLER TM1809
 #endif
 
+#ifndef DATA_PIN
+#define DATA_PIN 4
+#endif
+
+#ifndef ORDER
+#define ORDER BRG
+#endif
+
+#ifndef MODBUS_TX_PIN
 #define TXEnablePin 13
+#else
+#define TXEnablePin MODBUS_TX_PIN
+#endif
+
 #define ESP_EEPROM_SIZE 2048
 
 #ifndef AVR_DMXOUT_PIN
-#define AVR_DMXOUT_PIN 3
+#define AVR_DMXOUT_PIN 18
 #endif
 
 #define T_ATTEMPTS 200
@@ -18,8 +40,13 @@
 #define THERMO_OVERHEAT_CELSIUS 38.
 #define FM_OVERHEAT_CELSIUS 40.
 
-#define MIN_VOLUME 10
+#define MIN_VOLUME 25
-#define INIT_VOLUME 50
+#define INIT_VOLUME 40
+
+#define MAXFLASHSTR 32
+#define PWDFLASHSTR 16
+#define EEPROM_SIGNATURE "LHCF"
+#define EEPROM_SIGNATURE_LENGTH 4
 
 #define OFFSET_MAC 0
 #define OFFSET_IP OFFSET_MAC+6
@@ -27,12 +54,15 @@
 #define OFFSET_GW OFFSET_DNS+4
 #define OFFSET_MASK OFFSET_GW+4
 #define OFFSET_CONFIGSERVER OFFSET_MASK+4
-#define OFFSET_MQTT_PWD OFFSET_CONFIGSERVER+32
+#define OFFSET_MQTT_PWD OFFSET_CONFIGSERVER+MAXFLASHSTR
-#define EEPROM_offset_NotAlligned OFFSET_MQTT_PWD+16
+#define OFFSET_SIGNATURE OFFSET_MQTT_PWD+PWDFLASHSTR
-#define EEPROM_offset EEPROM_offset_NotAlligned + (4 -(EEPROM_offset_NotAlligned & 3))
+#define EEPROM_offset_NotAlligned OFFSET_SIGNATURE+EEPROM_SIGNATURE_LENGTH
+#define EEPROM_offsetJSON EEPROM_offset_NotAlligned + (4 -(EEPROM_offset_NotAlligned & 3))
+#define EEPROM_FIX_PART_LEN EEPROM_offsetJSON-OFFSET_MAC
+
 
 #ifndef INTERVAL_CHECK_INPUT
-#define INTERVAL_CHECK_INPUT  50
+#define INTERVAL_CHECK_INPUT  15
 #endif
 
 #ifndef INTERVAL_CHECK_SENSOR
@@ -75,19 +105,6 @@
 #ifndef HOMETOPIC
 #define HOMETOPIC  "myhome"
 #endif
-/*
-#ifndef OUTTOPIC
-#define OUTTOPIC "/myhome/s_out/"
-#endif
-
-#ifndef CMDTOPIC
-#define CMDTOPIC "/myhome/in/command/"
-#endif
-
-#ifndef INTOPIC
-#define INTOPIC  "/myhome/in/"
-#endif
-*/
 
 //Default output topic
 #ifndef OUTTOPIC
@@ -116,7 +133,7 @@
 #define _owire
 #endif
 
-#ifndef MODBUS_DISABLE
+#if !(defined  (MODBUS_DISABLE) && defined (MBUS_DISABLE))
 #define _modbus
 #endif
 
@@ -128,12 +145,16 @@
 #define LAN_INIT_DELAY 500
 #endif
 
+#define DEFAULT_INC_STEP 5
+
 #if defined(ARDUINO_ARCH_AVR)
 //All options available
 #ifdef CONTROLLINO
 #define modbusSerial Serial3
+#define AC_Serial Serial2
 #else
 #define modbusSerial Serial2
+#define AC_Serial Serial3
 #endif
 #define dmxin DMXSerial
 #define dmxout DmxSimple
@@ -141,6 +162,7 @@
 
 #if defined(__SAM3X8E__)
 #define modbusSerial Serial2
+#define AC_Serial Serial3
 #define dmxout DmxDue1
 #define dmxin  DmxDue1
 #endif
@@ -154,23 +176,27 @@
 
 #if defined(ARDUINO_ARCH_ESP8266)
 #undef _dmxin
-#undef _modbus
+//#undef _modbus
 
 #ifndef DMX_DISABLE
 #define _espdmx
 #endif
+
 #define modbusSerial Serial1
+#define AC_Serial Serial1
 #endif
 
 #if defined(ARDUINO_ARCH_ESP32)
 #undef _dmxin
-#undef _modbus
+//#undef _modbus
 
 #ifndef DMX_DISABLE
 #define _espdmx
 #endif
 //#undef _dmxout
-#undef modbusSerial
+//#undef modbusSerial
+#define modbusSerial Serial2
+#define AC_Serial Serial2
 #endif
 
 #ifndef _dmxout
@@ -194,16 +220,51 @@
 #define strncpy_P strncpy
 #endif
 
+#ifndef DMX_SMOOTH_DELAY
+#define DMX_SMOOTH_DELAY 10
+#endif
+
 //#ifdef M5STACK
 //#define debugSerial M5.Lcd
 //#endif
 
-#ifndef debugSerial
+#ifndef debugSerialPort
-#define debugSerial Serial
+#define debugSerialPort Serial
 #endif
 
+
 #ifndef Wiz5500
 #define W5100_ETHERNET_SHIELD
 #else
 #define W5500_ETHERNET_SHIELD
 #endif
+
+
+#if defined(ARDUINO_ARCH_AVR)
+#define PINS_COUNT NUM_DIGITAL_PINS
+#define isAnalogPin(p)  ((p >= 54) && (p<=69))
+#endif
+
+#if defined(__SAM3X8E__)
+#define isAnalogPin(p)  (g_APinDescription[p].ulPinAttribute & PIN_ATTR_ANALOG) == PIN_ATTR_ANALOG
+#endif
+
+#if defined(ARDUINO_ARCH_STM32)
+#define PINS_COUNT NUM_DIGITAL_PINS
+#define isAnalogPin(p)  ((p >= 44) && (p<=57))
+#endif
+
+#if defined(ESP8266)
+#define PINS_COUNT NUM_DIGITAL_PINS
+#define isAnalogPin(p)  ( p ==17 )
+#endif
+
+#if defined(ARDUINO_ARCH_ESP32)
+#define PINS_COUNT NUM_DIGITAL_PINS
+#define isAnalogPin(p)  ((p ==4) || (p>=12)&& (p<=15) || (p>=25)&& (p<=27)||(p>=32)&& (p<=33) || (p>=37)&& (p<=38))
+#endif
+
+#if defined(NRF5)
+#define PINS_COUNT NUM_DIGITAL_PINS
+#define isAnalogPin(p)  ((p >= 14) && (p<=21))
+#endif

lighthub/owTerm.cpp

@@ -24,6 +24,7 @@ e-mail    anklimov@gmail.com
 #include <Arduino.h>
 #include "utils.h"
 #include "options.h"
+#include "main.h"
 
 
 OneWire *oneWire = NULL;
@@ -42,9 +43,13 @@ owChangedType owChanged;
 int owUpdate() {
 #ifndef OWIRE_DISABLE
     unsigned long finish = millis() + OW_UPDATE_INTERVAL;
-    short sr;
+/*
-
+    if (oneWire->getError() == DS2482_ERROR_SHORT)
-
+       {
+         debugSerial<<F("1-wire shorted.")<<endl;
+         return false;
+       }
+*/
     Serial.println(F("Searching"));
     if (oneWire) oneWire->reset_search();
     for (short i = 0; i < t_count; i++) wstat[i] &= ~SW_FIND; //absent
@@ -68,7 +73,9 @@ int owUpdate() {
                 debugSerial.println();
                 if (term[t_count][0] == 0x28) {
                     sensors->setResolution(term[t_count], TEMPERATURE_PRECISION);
+                    #ifdef DS2482_100_I2C_TO_1W_BRIDGE
                     oneWire->setStrongPullup();
+                    #endif
                     //                sensors.requestTemperaturesByAddress(term[t_count]);
                 }
                 t_count++;
@@ -78,6 +85,7 @@ int owUpdate() {
 
     debugSerial<<F("1-wire count: ")<<t_count<<endl;
 #endif
+return true;
 }
 
 
@@ -94,15 +102,13 @@ int owSetup(owChangedType owCh) {
     oneWire = new OneWire (USE_1W_PIN);
 #endif
 
-
-
 // Pass our oneWire reference to Dallas Temperature.
-    sensors = new DallasTemperature(oneWire);
+//    sensors = new DallasTemperature(oneWire);
 
     term = new DeviceAddress[t_max];
 //regs = new    int [t_max];
     wstat = new uint16_t[t_max];
-
+    owChanged = owCh;
 
 #ifdef DS2482_100_I2C_TO_1W_BRIDGE
     Wire.begin();
@@ -118,30 +124,42 @@ int owSetup(owChangedType owCh) {
         debugSerial.println(F("\tChecking for 1-Wire devices..."));
         if (oneWire->wireReset())
             debugSerial.println(F("\tReset done"));
-
-        sensors->begin();
-        owChanged = owCh;
-        //owUpdate();
-        //debugSerial.println(F("\t1-w Updated"));
-        sensors->setWaitForConversion(false);
-
-
         return true;
     }
-#endif
     debugSerial.println(F("\tDS2482 error"));
     return false;
-    // IC Default 9 bit. If you have troubles consider upping it 12. Ups the delay giving the IC more time to process the temperature measurement
+#else
+   // software driver
+   oneWire->reset();
+   delay(500);
+   return true;
+#endif //DS2482-100
 
-
+#endif //1w is not disabled
-    delay(500);
+return false;
-
-#endif
 }
 
 
 int sensors_loop(void) {
-    if (!sensors) return -1;
+#ifdef DS2482_100_I2C_TO_1W_BRIDGE
+    if (oneWire->getError() == DS2482_ERROR_SHORT)
+       {
+         debugSerial<<F("1-wire shorted")<<endl;
+         oneWire->wireReset();
+         return 10000;
+       }
+#endif
+
+    if (!sensors)
+       {
+         // Setup sensors library and resolution
+         sensors = new DallasTemperature(oneWire);
+         sensors->begin();
+         // IC Default 9 bit. If you have troubles consider upping it 12. Ups the delay giving the IC more time to process the temperature measurement
+         for (short i = 0; i < t_count; i++) sensors->setResolution(term[i],TEMPERATURE_PRECISION);
+         sensors->setWaitForConversion(false);
+       }
+
     if (si >= t_count) {
         owUpdate(); //every check circle - scan for new devices
         si = 0;
@@ -184,17 +202,22 @@ void owAdd(DeviceAddress addr) {
   if (t_count>=t_max) return;
     wstat[t_count] = SW_FIND; //Newly detected
     memcpy(term[t_count], addr, 8);
-    //term[t_count]=addr;
 
     debugSerial<<F("dev#")<<t_count<<F(" Addr:");
     PrintBytes(term[t_count], 8,0);
     debugSerial.println();
-    if (term[t_count][0] == 0x28) {
+    #ifdef DS2482_100_I2C_TO_1W_BRIDGE
-        sensors->setResolution(term[t_count], TEMPERATURE_PRECISION);
+    if (term[t_count][0] == 0x28)
-        oneWire->setStrongPullup();
+                  oneWire->setStrongPullup();
-        //                sensors.requestTemperaturesByAddress(term[t_count]);
+    #endif
-    }
     t_count++;
 #endif
 }
 #endif
+
+void setupOwIdle (void (*ptr)())
+{
+  #ifdef DS2482_100_I2C_TO_1W_BRIDGE
+      if (oneWire) oneWire->idle(ptr);
+  #endif
+}

lighthub/owTerm.h

@@ -1,4 +1,4 @@
-/* Copyright © 2017-2018 Andrey Klimov. All rights reserved.
+/* Copyright © 2017-2020 Andrey Klimov. All rights reserved.
 
 Licensed under the Apache License, Version 2.0 (the "License");
 you may not use this file except in compliance with the License.
@@ -19,6 +19,7 @@ e-mail    anklimov@gmail.com
 */
 
 //define APU_OFF
+#pragma once
 
 #define SW_AUX0 0x40
 #define SW_AUX1 0x80
@@ -52,23 +53,25 @@ e-mail    anklimov@gmail.com
 
 #ifndef OWIRE_DISABLE
 
-#ifndef ARDUINO_ARCH_STM32F1
-#include <DS2482_OneWire.h>
-#endif
-
 #include <DallasTemperature.h>
 #include "aJSON.h"
 
 extern aJsonObject *owArr;
 
 typedef   void (*owChangedType) (int , DeviceAddress, float) ;
+
 #ifndef USE_1W_PIN
 #define DS2482_100_I2C_TO_1W_BRIDGE // HW driver
+#include <Wire.h>
+  #ifndef ARDUINO_ARCH_STM32F1
+  #include <DS2482_OneWire.h>
+  #endif
+#else
+#include <OneWire.h> //Software driver
+#define wireReset reset
+#define wireSearch search
 #endif
 
-#ifdef DS2482_100_I2C_TO_1W_BRIDGE
-#include <Wire.h>
-#endif
 
 extern OneWire *oneWire;
 
@@ -86,7 +89,7 @@ extern owChangedType  owChanged;
 int  owUpdate();
 int  owSetup(owChangedType owCh);
 void owLoop();
-void owIdle(void) ;
+void setupOwIdle(void (*)()) ;
 int owFind(DeviceAddress addr);
 void owAdd (DeviceAddress addr);
 

lighthub/streamlog.cpp

@@ -0,0 +1,86 @@
+#include "streamlog.h"
+#include <Arduino.h>
+#include "utils.h"
+
+#if defined (STATUSLED)
+extern statusLED LED;
+#endif
+
+#ifdef SYSLOG_ENABLE
+extern bool syslogInitialized;
+Streamlog::Streamlog (HardwareSerial * _serialPort, int _severity , Syslog * _syslog, uint8_t _ledPattern )
+{
+      serialPort=_serialPort;
+      severity=_severity;
+      syslog=_syslog;
+      ledPattern=_ledPattern;
+}
+#else
+Streamlog::Streamlog (HardwareSerial * _serialPort, int _severity,  uint8_t _ledPattern)
+{
+      serialPort=_serialPort;
+      severity=_severity;
+}
+#endif
+
+void Streamlog::begin(unsigned long speed)
+{
+  if (serialPort) serialPort->begin(speed);
+};
+
+void Streamlog::end()
+{
+  if (serialPort) serialPort->end();
+};
+
+int Streamlog::available(void)
+{
+  if (serialPort) return serialPort->available();
+  return 0;
+};
+
+int Streamlog::peek(void)
+{
+  if (serialPort) return serialPort->peek();
+  return 0;
+};
+
+int Streamlog::read(void)
+{
+  if (serialPort) return serialPort->read();
+  return 0;
+};
+
+
+void Streamlog::flush(void)
+{
+  if (serialPort) serialPort->flush();
+
+};
+
+size_t Streamlog::write(uint8_t ch)
+{
+#ifdef SYSLOG_ENABLE
+if (syslogInitialized)
+  {
+  if (ch=='\n')
+              {
+                logBuffer[logBufferPos]=0;
+                if (syslog) syslog->log(severity,(char *)logBuffer);
+                logBufferPos=0;
+              }
+      else
+        {
+          if (logBufferPos<LOGBUFFER_SIZE-1 && (ch!='\r')) logBuffer[logBufferPos++]=ch;
+        }
+   }
+#endif
+
+  #if defined (STATUSLED)
+  if ((ch=='\n') && ledPattern) LED.flash(ledPattern);
+  #endif
+
+  if (serialPort) return serialPort->write(ch);
+
+  return 1;
+};

lighthub/streamlog.h

@@ -0,0 +1,48 @@
+#include <Print.h>
+#include <HardwareSerial.h>
+#include <inttypes.h>
+
+#ifndef LOGBUFFER_SIZE
+#define LOGBUFFER_SIZE 80
+#endif
+
+#ifdef SYSLOG_ENABLE
+#include <Syslog.h>
+static char logBuffer[LOGBUFFER_SIZE];
+static int  logBufferPos=0;
+#endif
+
+#define LOG_DEBUG 7
+#define LOG_INFO 6
+#define LOG_ERROR 3
+
+static uint8_t serialDebugLevel = 7;
+static uint8_t udpDebugLevel =7;
+
+class Streamlog : public Print
+{
+  public:
+    #ifdef SYSLOG_ENABLE
+    Streamlog (HardwareSerial * _serialPort, int _severity = LOG_DEBUG, Syslog * _syslog = NULL, uint8_t _ledPattern = 0);
+    #else
+    Streamlog (HardwareSerial * _serialPort, int _severity = LOG_DEBUG, uint8_t _ledPattern = 0);
+    #endif
+      //    {serialPort=_serialPort;severity=_severity; syslog=_syslog; }
+    void begin(unsigned long speed);
+    void end() ;
+
+    int available(void);
+    int peek(void);
+    int read(void);
+    void flush(void);
+    size_t write(uint8_t ch);
+    using Print::write; // pull in write(str) and write(buf, size) from Print
+    operator bool() {return true;};
+  private:
+    uint16_t severity;
+    HardwareSerial *serialPort;
+    #ifdef SYSLOG_ENABLE
+    Syslog * syslog;
+    uint8_t ledPattern;
+    #endif
+};