bins

build-flags/build_flags_esp8266-wifi

@@ -44,3 +44,6 @@
 -D BEARSSL_SSL_BASIC
 -D SPILED_DISABLE 
 -D PWM_DISABLE
+
+# WAK for HDC1080 (pin D3 on wemos is IO0)
+-D WAK_PIN=D3

compiled/lighthub21/upload.sh

@@ -1,3 +1,3 @@
-export PORT=cu.usbmodem141101
+export PORT=cu.usbmodem142101
 echo . |  stty -f /dev/$PORT speed 1200
 ../tools/mac/tool-bossac/bossac -U false -p $PORT -i  -w -v -b firmware.bin -R 

lighthub/inputs.cpp

@@ -146,7 +146,8 @@ if (input->type == aJson_Object)  {
     else
     {
      Input in(input);
-     in.Poll(CHECK_INPUT);
+     in.store->aslong = 0;
+     //in.Poll(CHECK_INPUT);
     }
 }
 }
@@ -524,7 +525,7 @@ bool Input::changeState(uint8_t newState, short cause)
 if (!inputObj ||  !store) return false;
 
 if (newState == IS_REQSTATE)
-  if (store->delayedState && cause != CHECK_INTERRUPT)
+  if (store->delayedState && (cause != CHECK_INTERRUPT))
     {
       // Requested delayed change State and safe moment
       newState=store->reqState; //Retrieve requested state

lighthub/inputs.h

@@ -105,7 +105,7 @@ extern aJsonObject *inputs;
 
 
 typedef union {
-    long int aslong;
+    uint32_t aslong;
     uint32_t timestamp;
     // Analog input structure
     struct {

lighthub/item.cpp

@@ -327,7 +327,7 @@ void Item::setCmd(uint8_t cmdValue) {
     {   
         itemCmd->type = aJson_Int;
         itemCmd->valueint = cmdValue & CMD_MASK | itemCmd->valueint & (FLAG_MASK);   // Preserve special bits
-        debugSerial<<F("SetCmd:")<<cmdValue<<endl;
+        //debugSerial<<F("SetCmd:")<<cmdValue<<endl;
       }
 }
 

lighthub/itemCmd.cpp

@@ -1171,8 +1171,8 @@ bool itemCmd::saveItem(Item * item, uint16_t optionsFlag)
                                      item->setVal(param.asInt32);
                                      item->setSubtype(cmd.itemArgType); 
                                     }
-  debugSerial<<F("Saved:");
+  //debugSerial<<F("Saved:");
-  debugOut();
+  //debugOut();
   return true;
   }
 return false;

lighthub/main.cpp

@@ -170,6 +170,13 @@ bool cleanConf(bool wait)
 {
   if (!root) return true;
   bool clean = true;
+if (configLocked)
+                {
+                    errorSerial<<F("Can not clean - locked")<<endl;
+                    return false;
+                }
+/*
+No more unsafe operations  
 if (wait)
 {  
 debugSerial<<F("Unlocking config ...")<<endl;
@@ -196,6 +203,7 @@ if (configLocked)
     clean = false;
 }
 } //wait
+*/
 
 debugSerial<<F("Stopping channels ...")<<endl;
 timerHandlerBusy++;
@@ -400,7 +408,7 @@ void mqttCallback(char *topic, byte *payload, unsigned int length)
 
     int fr = freeRam();
 
-    debugSerial<<F("\n")<<fr<<F(":[")<<topic<<F("] ");
+    debugSerial<<fr<<F(":[")<<topic<<F("] ");
 
     if (fr < 250+MQTT_TOPIC_LENGTH) {
         errorSerial<<F("OutOfMemory!")<<endl;
@@ -619,12 +627,14 @@ lan_status lanLoop() {
         if (!initializedListeners)
         {
                 setupSyslog();
+                debugSerial<<F("Setup OTA")<<endl;
                 setupOTA();
                 #ifdef _artnet
                             if (artnet) artnet->begin();
                 #endif
 
                 #ifdef IPMODBUS
+                debugSerial<<F("Setup IPModbus")<<endl;
                 setupIpmodbus();
                 #endif
                 initializedListeners = true;
@@ -763,8 +773,32 @@ lan_status lanLoop() {
                  }
             break;
 
+        case DO_GET:
+            if (mqttClient.connected()) mqttClient.disconnect();
+            timerLanCheckTime = millis();// + 5000;
+            lanStatus = GET;
+            break;
+
+        case GET:
+            statusLED.set(ledRED|ledGREEN|((configLoaded)?ledBLINK:0));
+            if (configLocked) return GET;      
+            lanStatus = GET_IN_PROGRESS;
+            if (loadConfigFromHttp()==200) lanStatus = IP_READY_CONFIG_LOADED_CONNECTING_TO_BROKER;
+                            else if (configLoaded)   {
+                                                        infoSerial<<F("Continue with previously loaded config")<<endl;
+                                                        lanStatus = IP_READY_CONFIG_LOADED_CONNECTING_TO_BROKER;
+                                                        }
+                            
+                            else if (Ethernet.localIP()) lanStatus = DO_READ_RE_CONFIG;
+
+                            else lanStatus = DO_REINIT; //Load from NVRAM
+                           
+            break;      
+
+
         case DO_NOTHING:
         case OPERATION_NO_MQTT:
+        case GET_IN_PROGRESS:
         ;
     }
 
@@ -1680,7 +1714,10 @@ if (arg_cnt>1)
 if (lanStatus>=HAVE_IP_ADDRESS)
 {
 
-
+lanStatus = DO_GET;
+return 200;
+/*
+let Re-Get will be only in safe time 
 int retCode=loadConfigFromHttp();
     if (retCode==200)
     {
@@ -1699,6 +1736,7 @@ int retCode=loadConfigFromHttp();
     if (configLoaded) lanStatus =IP_READY_CONFIG_LOADED_CONNECTING_TO_BROKER;
        else lanStatus = DO_READ_RE_CONFIG;
     return retCode; 
+    */
 }
 errorSerial<<F("No IP adress")<<endl;
 return 500;
@@ -1772,7 +1810,12 @@ if (!sysConf.getServer(configServer,sizeof(configServer)))
             infoSerial<<F("got Config\n"); delay(500);
             aJsonFileStream as = aJsonFileStream(configStream);
             noInterrupts();
-            cleanConf(true);
+        if (!cleanConf(true))
+        {
+            errorSerial<<F("Get aborted")<<endl;
+            hclient.closeStream(configStream); 
+            return 500;
+        }
             root = aJson.parse(&as);
             interrupts();
             hclient.closeStream(configStream);  // this is very important -- be sure to close the STREAM
@@ -1844,7 +1887,13 @@ if (!sysConf.getServer(configServer,sizeof(configServer)))
     if (responseStatusCode == 200) {
         aJsonStream socketStream = aJsonStream(&htclient);
         debugSerial<<F("Free:")<<freeRam()<<endl;
-        cleanConf(true);
+        if (!cleanConf(true))
+        {
+            errorSerial<<F("Get aborted")<<endl;
+            htclient.stop();
+            return 500;
+        }
+
         debugSerial<<F("Configuration cleaned")<<endl;
         debugSerial<<F("Free:")<<freeRam()<<endl;
         //root = aJson.parse((char *) response.c_str());
@@ -1917,7 +1966,12 @@ if (!sysConf.getServer(configServer,sizeof(configServer)))
             sysConf.setETAG(httpClient.header("ETag"));
             //String response = httpClient.getString();
             //debugSerial<<response;
-            cleanConf(true);
+        if (!cleanConf(true))
+        {
+            errorSerial<<F("Get aborted")<<endl;
+            httpClient.end();
+            return 500;
+        }
             //root = aJson.parse((char *) response.c_str());
             root = aJson.parse(&socketStream);
     
@@ -2634,12 +2688,12 @@ void loop_main() {
 
         #if defined(OTA)
         yield();
-        ArduinoOTA.poll();
+        if (initializedListeners) ArduinoOTA.poll();
         #endif
 
 #ifdef _artnet
         yield();
-        if (artnet) artnet->read();  ///hung if network not initialized
+        if (artnet && initializedListeners) artnet->read();  ///hung if network not initialized
 #endif
 #ifdef MDNS_ENABLE
         #ifndef WIFI_ENABLE
@@ -2688,7 +2742,7 @@ if (initializedListeners) ipmodbusLoop();
 void owIdle(void) {
  //   timerCtr++;    
 #ifdef _artnet
-    if (artnet && (lanStatus>=HAVE_IP_ADDRESS)) artnet->read();
+    if (artnet && initializedListeners && (lanStatus>=HAVE_IP_ADDRESS)) artnet->read();
 #endif
 
 wdt_res();
@@ -2747,7 +2801,7 @@ void modbusIdle(void) {
         yield();
         mqttClient.loop();
 #ifdef _artnet
-        if (artnet) artnet->read();
+        if (artnet && initializedListeners) artnet->read();
 #endif
 #if defined(OTA)
         yield();
@@ -2819,9 +2873,10 @@ inputLoopBusy--;
 void inputSensorsLoop() {
 if (!inputs || inputLoopBusy) return;
 //inputLoopBusy++;
-configLocked++;
+//configLocked++;
     if (isTimeOver(timerSensorCheck,millis(),INTERVAL_CHECK_SENSOR))
     {
+        configLocked++;
         aJsonObject *input = inputs->child;
         while (input) {
             if ((input->type == aJson_Object)) {
@@ -2833,8 +2888,9 @@ configLocked++;
             input = input->next;
         }
         timerSensorCheck = millis();
-    }
         configLocked--;
+    }
+//configLocked--;
 //inputLoopBusy--;
 }
 

lighthub/main.h

@@ -218,7 +218,10 @@ enum lan_status {
     RECONNECT = 13,
     READ_RE_CONFIG = 14,
     DO_READ_RE_CONFIG = 15,
-    DO_NOTHING = -15
+    DO_NOTHING = -15,
+    DO_GET = -16,
+    GET = -17,
+    GET_IN_PROGRESS = 18
 };
 
 extern lan_status lanStatus;

lighthub/modules/in_ccs811_hdc1080.h

@@ -16,13 +16,13 @@
 
 #if defined (ARDUINO_ARCH_ESP8266) 
 
-    #if not defined (TWI_SCL) && defined (D1)
+ //   #if not defined (TWI_SCL) && defined (D1)
-    #define TWI_SCL D1
+ //   #define TWI_SCL D1
-    #endif
+ //   #endif
 
-    #if not defined (WAK_PIN) && defined (D3)
+  //  #if not defined (WAK_PIN) && defined (D3)
-    #define WAK_PIN D3
+  //  #define WAK_PIN D3
-    #endif
+  //  #endif
 
     #if defined (TWI_SCL)
     #define SCL_LOW()   (GPES = (1 << TWI_SCL))
@@ -35,7 +35,7 @@
 
 
 #if defined (ARDUINO_ARCH_ESP32)
-#undef WAK_PIN
+//#undef WAK_PIN
 #undef SCL_RESET
 //#ifndef WAK_PIN
 //#define WAK_PIN 17
@@ -43,9 +43,9 @@
 #endif
 
 #if defined(ARDUINO_ARCH_AVR)
-#ifndef WAK_PIN
+//#ifndef WAK_PIN
-#define WAK_PIN 3  // for LightHub UEXT SCS Pin
+//#define WAK_PIN 3  // for LightHub UEXT SCS Pin
-#endif
+//#endif
 #endif
 
 

lighthub/modules/out_ac.cpp

@@ -468,6 +468,7 @@ int out_AC::Ctrl(itemCmd cmd,  char* subItem , bool toExecute, bool authorized)
 
       case S_CMD:
      // s_mode[0]='\0';
+            store->inCheck=0;
             switch (cmd.getCmd())
                 {
                   case CMD_ON:
@@ -549,9 +550,42 @@ int out_AC::Ctrl(itemCmd cmd,  char* subItem , bool toExecute, bool authorized)
       store->data[B_FAN_SPD] = 2;
       strcpy_P(s_speed,LOW_P);
       break;
+      case CMD_OFF:
+                      store->inCheck=0;
+                      store->data[B_POWER] = store->power;
+                      store->data[B_POWER] &= ~1;
+                      SendData(off, sizeof(off)/sizeof(byte));
+      return 1;
       default:
-      //if (n) data[B_FAN_SPD] = Parameters[0];
+      {
-      store->data[B_FAN_SPD] = cmd.getInt();
+      uint8_t speed = 0;
+      if (cmd.getInt()) speed =  map(cmd.getInt(),1,255,1,3);
+      store->inCheck=0;
+      switch (speed) {
+        case 0:
+                      store->data[B_POWER] = store->power;
+                      store->data[B_POWER] &= ~1;
+                      SendData(off, sizeof(off)/sizeof(byte));
+        return 1;
+        case 1:
+            store->data[B_FAN_SPD] = 2;
+            strcpy_P(s_speed,LOW_P);
+            store->data[B_POWER] = store->power;
+            store->data[B_POWER] |= 1;
+        break;
+        case 2:
+              store->data[B_FAN_SPD] = 1;
+              strcpy_P(s_speed,MED_P);
+              store->data[B_POWER] = store->power;
+              store->data[B_POWER] |= 1;
+        break;
+        case 3:
+              store->data[B_FAN_SPD] = 0;
+              strcpy_P(s_speed,HIGH_P);  
+              store->data[B_POWER] = store->power;
+              store->data[B_POWER] |= 1;    
+      }
+      }
       //TODO - mapping digits to speed
       }
       publishTopic(item->itemArr->name,s_speed,"/fan");

lighthub/modules/out_modbus.cpp

@@ -341,7 +341,7 @@ itemCmd out_Modbus::findRegister(uint16_t registerNum, uint16_t posInBuffer, uin
                               switch (defMappingObj->type)
                                {
                                 case aJson_Int: //register/coil/.. number
-                                  debugSerial<<F("Searching reg#")<<defMappingObj->valueint<<endl; 
+                                  traceSerial<<F("Searching reg#")<<defMappingObj->valueint<<endl; 
                                   if ((defMappingObj->valueint>= registerFrom) && (defMappingObj->valueint<=registerTo))  
                                       {   
                                       mappedParam = findRegister(defMappingObj->valueint,defMappingObj->valueint-registerFrom,regType,registerFrom,registerTo,false,&submitRecurrentOut);
@@ -351,7 +351,7 @@ itemCmd out_Modbus::findRegister(uint16_t registerNum, uint16_t posInBuffer, uin
 
                                 break;
                                 case aJson_String: // parameter name
-                                 debugSerial<<F("Searching reg: ")<<defMappingObj->valuestring<<endl; 
+                                 traceSerial<<F("Searching reg: ")<<defMappingObj->valuestring<<endl; 
                                  if (itemParametersObj && itemParametersObj->type ==aJson_Object) 
                                     {      
                                       //Searching item param for nested mapping 
@@ -364,7 +364,7 @@ itemCmd out_Modbus::findRegister(uint16_t registerNum, uint16_t posInBuffer, uin
                                             aJsonObject *lastMeasured = aJson.getObjectItem(itemParObj,"@S");
                                             if (lastMeasured && lastMeasured->type ==aJson_Int)
                                             {
-                                            debugSerial<<F("LastKnown value: ")<<lastMeasured->valueint<<endl; 
+                                            traceSerial<<F("LastKnown value: ")<<lastMeasured->valueint<<endl; 
                                             //Searching template param for nested mapping
                                             aJsonObject * templateParObj = aJson.getObjectItem(store->parameters,defMappingObj->valuestring);
                                               if (templateParObj)
@@ -550,7 +550,7 @@ return itemCmd();
                   int registerTo=aJson.getArrayItem(reg, 1)->valueint;
 
                   if (readModbus(registerFrom,regType,registerTo-registerFrom+1))
-                    { debugSerial<<endl;
+                    { traceSerial<<endl;
                       for(int i=registerFrom;i<=registerTo;i++)
                         {
                           findRegister(i,i-registerFrom,regType,registerFrom,registerTo);
@@ -633,7 +633,7 @@ int out_Modbus::sendModbus(char * paramName, int32_t value, uint8_t regType)
                       break;
                     }
  mbusSlenceTimer = millisNZ();                   
- debugSerial<<F("Res: ")<<res<<F(" ")<<paramName<<" reg:"<<regObj->valueint<<F(" val:")<<value<<endl;
+ debugSerial<<F("MBUS res: ")<<res<<F(" ")<<paramName<<" reg:"<<regObj->valueint<<F(" val:")<<value<<endl;
  return ( res == 0);
 }
 
@@ -667,8 +667,18 @@ if (itemParametersObj && itemParametersObj->type ==aJson_Object)
                                                       lineInitialized=true;  
                                                       initLine();
                                                     }
+
+                                              int sendRes;
+                                              int savedValue;
+                                              do
+                                                  {
+                                                  savedValue = outValue->valueint;  
                                                   debugSerial<<"MBUS: SEND "<<item->itemArr->name<<" ";   
-                                              switch (sendModbus(execObj->name,outValue->valueint,outValue->subtype)) 
+                                                  sendRes = sendModbus(execObj->name,outValue->valueint,outValue->subtype);
+                                                  }
+                                              while (savedValue != outValue->valueint); //repeat sending if target value changed while we're waited for mbus responce
+
+                                              switch (sendRes) 
                                               {
                                                case 1: //success
                                                  execObj->subtype&=~ MB_NEED_SEND;

lighthub/modules/out_multivent.cpp

@@ -44,19 +44,19 @@ if (gatesObj /*&& aJson.getArraySize(item->itemArg)>=2*/)
              } 
              i=i->next; 
           }
-      debugSerial << F ("MultiVent init")<< endl;
+      debugSerial << F ("VENT: init")<< endl;
       setStatus(CST_INITIALIZED);
       return 1;
       }
 
-debugSerial << F ("MultiVent config failed")<< endl;
+debugSerial << F ("VENT: config failed")<< endl;
 return 0;
 
 }
 
 int  out_Multivent::Stop()
 {
-debugSerial << F ("Multivent De-Init") << endl;
+debugSerial << F ("VENT: De-Init") << endl;
 setStatus(CST_UNKNOWN);
 return 1;
 }
@@ -151,7 +151,7 @@ while (i)
 
                                                 if (cmdObj->valueint == CMD_OFF || cmdObj->valueint == -1) 
                                                     { 
-                                                     debugSerial<<"Turning ON"<<endl;
+                                                     debugSerial<<"VENT: Turning ON"<<endl;
                                                      cmdObj->valueint = CMD_ON; 
                                                      cmd.Cmd(CMD_ON);
                                                      //if (isNotRetainingStatus()) item->SendStatusImmediate(itemCmd().Cmd(CMD_ON),FLAG_COMMAND,i->name);
@@ -162,7 +162,7 @@ while (i)
                                            else
                                                 {
                                              if (cmdObj->valueint != CMD_OFF && cmdObj->valueint != -1)  
-                                                    { debugSerial<<"Turning OFF"<<endl; 
+                                                    { debugSerial<<"VENT: Turning OFF"<<endl; 
                                                       cmdObj->valueint = CMD_OFF; 
                                                       cmd.Cmd(CMD_OFF);
                                                       //if (isNotRetainingStatus()) item->SendStatusImmediate(itemCmd().Cmd(CMD_OFF),FLAG_COMMAND,i->name);
@@ -204,10 +204,13 @@ while (i)
 if (!totalV) return 0;
 
 int fanV=activeV/totalV;
-debugSerial << F("Total V:")<<totalV<<F(" active V:")<<activeV/255<< F(" fan%:")<<fanV<< F(" Max request:")<<maxRequestedV/255 <<F(" from ")<<maxV<<F(" m3")<< endl;
+debugSerial << F("VENT: Total V:")<<totalV<<F(" active V:")<<activeV/255<< F(" fan%:")<<fanV<< F(" Max req:")<<maxRequestedV/255 <<F(" from ")<<maxV<<F(" m3")<< endl;
-
-executeCommand(aJson.getObjectItem(gatesObj, ""),-1,itemCmd().Percents255(fanV).Cmd((fanV)?CMD_ON:CMD_OFF));
 
+//executeCommand(aJson.getObjectItem(gatesObj, ""),-1,itemCmd().Percents255(fanV).Cmd((fanV)?CMD_ON:CMD_OFF));
+if (fanV)
+  executeCommand(aJson.getObjectItem(gatesObj, ""),-1,itemCmd().Percents255(fanV).Cmd(CMD_ON));
+else
+  executeCommand(aJson.getObjectItem(gatesObj, ""),-1,itemCmd().Percents255(fanV));
 //Move gates only if fan is actually on
 if (!fanV) return 1;
 
@@ -229,7 +232,7 @@ while (i)
           {
             int requestedV=V*setObj->valueint;
             out = (( long)requestedV*255L)/(( long)V)*( long)maxV/( long)maxRequestedV;
-            debugSerial<<i->name<<(" Req:")<<requestedV/255<<F(" Out:")<<out<<endl;
+            debugSerial<<F("VENT: ")<<i->name<<F(" Req:")<<requestedV/255<<F(" Out:")<<out<<endl;
           } 
 
          

lighthub/modules/out_pid.cpp

@@ -334,32 +334,38 @@ case S_CTRL:
       switch (command)
           {
           case CMD_OFF:
-            //value.Percents255(0);
+             if (isNotRetainingStatus()) executeCommand(oCmd,-1,itemCmd().Cmd(CMD_DISABLE)); // Not actually disable, just inform depended systems, that no autoreg now (for pannels indication)
-
+          executeCommand(oCmd,-1,value); 
+          item->SendStatus(FLAG_FLAGS);
+          return 1;  
           case CMD_ON:
           case CMD_HEAT:
           case CMD_COOL:
           case CMD_AUTO:
           case CMD_FAN:
           case CMD_DRY:
-
-          executeCommand(oCmd,-1,value); 
           executeCommand(oCmd,-1,itemCmd().Cmd((item->getFlag(FLAG_DISABLED))?CMD_DISABLE:CMD_ENABLE));
+          executeCommand(oCmd,-1,value); 
           item->SendStatus(FLAG_FLAGS);
           return 1;
 
           case CMD_ENABLE:
-          //item->setCmd(CMD_ENABLE);
+          if (isNotRetainingStatus()) 
-          //item->SendStatus(FLAG_COMMAND);
+                {
+                  item->setCmd(CMD_ON);
+                  item->SendStatus(FLAG_COMMAND);
+                }
           item->setFlag(FLAG_ACTION_NEEDED);
           executeCommand(oCmd,-1,value);
+          if (isActive()) executeCommand(oCmd,-1,itemCmd().Cmd((CMD_ON)));   
+       
+
           store->prevOut=-2.0;   
           return 1;
 
           case CMD_DISABLE:
-          //item->setCmd(CMD_DISABLE);
-          //item->SendStatus(FLAG_COMMAND);
           executeCommand(oCmd,-1,value);
+          if (!isActive()) executeCommand(oCmd,-1,itemCmd().Cmd((CMD_OFF))); 
           return 1;
 /*
           case CMD_OFF:

lighthub/systemconfigdata.h

@@ -5,7 +5,7 @@
 
 #define MAXFLASHSTR 32
 #define PWDFLASHSTR 16
-#define EEPROM_SIGNATURE "LHC1"
+#define EEPROM_SIGNATURE "LHC2"
 #define EEPROM_SIGNATURE_LENGTH 4
 
 //#define EEPROM_offsetJSON IFLASH_PAGE_SIZE
@@ -23,12 +23,12 @@ const char EEPROM_signature[] = EEPROM_SIGNATURE;
                 uint32_t configFlags32bit;
                 struct
                       { 
-                        uint8_t  serialDebugLevel:3; 
+                        uint8_t  serialDebugLevel:4; 
                         uint8_t  notGetConfigFromHTTP:1;
                         uint8_t  udpDebugLevel:3;                   
                         uint8_t  notSaveSuccedConfig:1;
                         uint8_t  dhcpFallback:1;
-                        uint8_t  spare2:7;
+                        uint8_t  spare2:6;
                         uint16_t sysConfigHash;
                       };      
  } systemConfigFlags;

platformio.ini

@@ -193,7 +193,7 @@ monitor_speed = 115200
 platform = espressif32
 framework = arduino
 monitor_filters = esp32_exception_decoder
-build_type = debug
+;build_type = debug
 board = esp32-evb
 extra_scripts = extra_script.py
 monitor_speed = 115200
@@ -521,10 +521,24 @@ lib_deps =
 platform = espressif8266
 framework = arduino
 ;board = nodemcuv2
-board = esp01_1m
+;esp12e             ESP8266  80MHz        4MB      80KB   Espressif ESP8266 ESP-12E
+;esp01_1m           ESP8266  80MHz        1MB      80KB   Espressif Generic ESP8266 ESP-01 1M
 extra_scripts = extra_script.py
-board_build.ldscript = eagle.flash.1m64.ld
+
-;upload_protocol = esptool
+;;;; 1M plug ;;;
+;board = esp01_1m
+;board_build.ldscript = eagle.flash.1m64.ld
+;;;;;;;;;;;;;;;;;;;
+
+;;;; WEMOS D1 ;;;;;
+board = d1_mini
+; change microcontroller
+board_build.mcu = esp8266
+; change MCU frequency
+board_build.f_cpu = 80000000L
+upload_protocol = esptool
+;;;;;;;;;;;;;;;;;;;
+
 ;build_type = debug
 ;monitor_filters = esp8266_exception_decoder