Files
lighthub/lighthub/item.h
2018-11-07 13:49:30 +03:00

169 lines
4.1 KiB
C++

/* Copyright © 2017-2018 Andrey Klimov. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Homepage: http://lazyhome.ru
GIT: https://github.com/anklimov/lighthub
e-mail anklimov@gmail.com
*/
#include "options.h"
#define CH_DIMMER 0 //DMX 1 ch
#define CH_RGBW 1 //DMX 4 ch
#define CH_RGB 2 //DMX 3 ch
#define CH_PWM 3 //PWM output directly to PIN
#define CH_MODBUS 4 //Modbus AC Dimmer
#define CH_THERMO 5 //Simple ON/OFF thermostat
#define CH_RELAY 6 //ON_OFF relay output
#define CH_GROUP 7 //Group pseudochannel
#define CH_VCTEMP 8 //Vacom PID regulator
#define CH_VC 9 //Vacom modbus motor regulator
#define CH_WHITE 127//
#define CMD_ON 1
#define CMD_OFF 2
#define CMD_RESTORE 3 //on only if was turned off by CMD_HALT
#define CMD_TOGGLE 4
#define CMD_HALT 5 //just Off
#define CMD_XON 6 //just on
#define CMD_XOFF 7 //off only if was previously turned on by CMD_XON
#define CMD_UP 8 //just on
#define CMD_DN 9 //off only if was previously turned on by CMD_XON
#define CMD_SET 0xe
#define CMD_MASK 0xf
#define CMD_CURTEMP 127
#define CMD_RETRY 64
#define CMD_REPORT 32
#define I_TYPE 0 //Type of item
#define I_ARG 1 //Chanel-type depended argument or array of arguments (pin, address etc)
#define I_VAL 2 //Latest preset (int or array of presets)
#define I_CMD 3 //Latest CMD received
#define I_EXT 4 //Chanell-depended extension - array
#define MODBUS_CMD_ARG_ADDR 0
#define MODBUS_CMD_ARG_REG 1
#define MODBUS_CMD_ARG_MASK 2
#define MODBUS_CMD_ARG_MAX_SCALE 3
#define MODBUS_CMD_ARG_REG_TYPE 4
#define MODBUS_COIL_REG_TYPE 0
#define MODBUS_DISCRETE_REG_TYPE 1
#define MODBUS_HOLDING_REG_TYPE 2
#define MODBUS_INPUT_REG_TYPE 3
#include "aJSON.h"
extern aJsonObject *items;
int txt2cmd (char * payload);
typedef union
{
long int aslong;
struct
{
int16_t h;
int8_t s;
int8_t v;
};
} HSVstore;
typedef union
{
long int aslong;
struct
{
int8_t r;
int8_t g;
int8_t b;
int8_t v;
};
} RGBVstore;
class Item
{
public:
aJsonObject *itemArr, *itemArg,*itemVal;
uint8_t itemType;
Item(char * name);
Item(aJsonObject * obj);
boolean isValid ();
virtual int Ctrl(short cmd, short n=0, int * Parameters=NULL, boolean send=true);
virtual int Ctrl(char * payload, boolean send=true);
int getArg(short n=0);
boolean getEnableCMD(int delta);
//int getVal(short n); //From VAL array. Negative if no array
long int getVal(); //From int val OR array
uint8_t getCmd(bool ext = false);
void setCmd(uint8_t cmdValue);
//void setVal(uint8_t n, int par);
void setVal(long int par);
//void copyPar (aJsonObject *itemV);
inline int On (){Ctrl(CMD_ON);};
inline int Off(){Ctrl(CMD_OFF);};
inline int Toggle(){Ctrl(CMD_TOGGLE);};
int Poll();
int SendStatus(short cmd, short n=0, int * Par=NULL, boolean deferred = false);
protected:
int VacomSetFan (int8_t val, int8_t cmd=0);
int VacomSetHeat(int addr, int8_t val, int8_t cmd=0);
int modbusDimmerSet(int addr, uint16_t _reg, int _regType, int _mask, uint16_t value);
void mb_fail(short addr, short op, int val, int cmd);
int isActive();
void Parse();
int checkModbusDimmer();
int checkModbusDimmer(int data);
boolean checkModbusRetry();
void sendDelayedStatus();
int checkFM();
};
/*
class PooledItem : public Item
{
public:
virtual int onContactChanged() = 0;
virtual void Idle ();
protected:
int PoolingInterval;
unsigned long next;
virtual int Pool() =0;
};
class Vacon : public Item
{
public:
int Pool ();
virtual int Ctrl(short cmd, short n=0, int * Par=NULL);
protected:
};
*/