tidy up comments

src/devices/connect.cpp

@@ -81,11 +81,10 @@ void Connect::process_RCTime(std::shared_ptr<const Telegram> telegram) {
     has_update(dateTime_, time, sizeof(dateTime_));
 }
 
-/* other values from 0x50 RF base
-(0x087F), data: 00 00
-(0x0880), data: 01 04
-(0x0889), data: 00 80 80 01
-*/
+// other values from 0x50 RF base
+// (0x087F), data: 00 00
+// (0x0880), data: 01 04
+// (0x0889), data: 00 80 80 01
 void Connect::register_device_values_room(std::shared_ptr<Connect::RoomCircuit> room) {
     auto tag = DeviceValueTAG::TAG_SRC1 + room->room();
     register_device_value(tag, &room->temp_, DeviceValueType::INT16, DeviceValueNumOp::DV_NUMOP_DIV10, FL_(roomTemp), DeviceValueUOM::DEGREES);

src/devices/solar.cpp

@@ -563,21 +563,19 @@ void Solar::process_SM100Differential(std::shared_ptr<const Telegram> telegram)
     has_update(telegram, diffControl_, 0); // is *10
 }
 
-/* process_SM100ParamCfg - type 0xF9 EMS 1.0
- * This telegram is used to inquire the min, default, max, and current values of a value that is usually read and written with another telegram ID
- * The CS200 uses this method extensively to find out which values may be set in the SM100
- * e.g. B0 10 F9 00 FF 02 5A 03 17 00 00 00 14 00 00 00 3C 00 00 00 5A 00 00 00 59 29 - requested with 90 B0 F9 00 11 FF 02 5A 03 AF
- * byte 0 = 0xFF
- * byte 1-2 = telegram ID used to write this value
- * byte 3 = offset in telegram used to write this value
- * byte 4 = unknown
- * bytes 5..8 = minimum value
- * bytes 9..12 = default value
- * bytes 13..16 = maximum value
- * bytes 17..20 = current value
- *
- * e.g. B0 0B F9 00 00 02 5A 00 00 6E
- */
+// process_SM100ParamCfg - type 0xF9 EMS 1.0
+// This telegram is used to inquire the min, default, max, and current values of a value that is usually read and written with another telegram ID
+// The CS200 uses this method extensively to find out which values may be set in the SM100
+// e.g. B0 10 F9 00 FF 02 5A 03 17 00 00 00 14 00 00 00 3C 00 00 00 5A 00 00 00 59 29 - requested with 90 B0 F9 00 11 FF 02 5A 03 AF
+// byte 0 = 0xFF
+// byte 1-2 = telegram ID used to write this value
+// byte 3 = offset in telegram used to write this value
+// byte 4 = unknown
+// bytes 5..8 = minimum value
+// bytes 9..12 = default value
+// bytes 13..16 = maximum value
+// bytes 17..20 = current value
+// e.g. B0 0B F9 00 00 02 5A 00 00 6E
 void Solar::process_SM100ParamCfg(std::shared_ptr<const Telegram> telegram) {
     uint16_t t_id = EMS_VALUE_UINT16_NOTSET;
     uint8_t  of   = EMS_VALUE_UINT8_NOTSET;

src/devices/ventilation.h

@@ -51,68 +51,6 @@ class Ventilation : public EMSdevice {
     bool set_ventMode(const char * value, const int8_t id);
     bool set_bypass(const char * value, const int8_t id);
     bool set_filter(const char * value, const int8_t id);
-
-
-    /* Sensors:
-    outdoor air temp (außenluft)
-    supply air temp (zuluft)
-    extract air temp (abluft)
-    away air temp (fortluft)
-    supply blower (zuluftgebläse)
-    supply blower mod (zuluftebläse drehzahl)
-    away blower (abluftgebläse)
-    away blower mod (abluftgebläse drehzahl)
-    Anschlussvariante
-    el. vorheizer
-    ext. el. vorheizreg.
-    nachheiz zulufttemp
-    mischer öffnen
-    mischer schließen
-    mischerposition
-    zuluft temp soll
-    zuluft temp ist
-    leistung nachheizreg.
-    erdwärmetauscher klappe
-    solekreispumpe
-    abluftfeuchte
-    abluftqualität
-    raumluftfechte
-    raumluftqualität
-    luftfeuchte fernbed. 1..4
-    */
-    /* Parameters:
-    Gerätetyp,
-    Nennvolumentstrom,
-    Filterlaufzeit 1-6-12 m
-    Filterwechsel confirm CMD
-    Lüftungsfrostschutz: _el._preheat_, Disballance | Interval
-    Ext. Frostschutz: on/_off_
-    Bypass _on_, off
-    min. outdoortemp 12 15 19 °C
-    max. outdoortemp 21-24-30 C
-    Enthalpie Wärmetauscher instaliert nein-ja
-    Feuchteschutz AUs/ 1-24 h
-    Lüfterstufe 1-4, Drehzahlanpassung
-    ext. Luftfeuchtefühler inst.? _nein_, ja
-    Abluftfeuchtefühler inst.? _nein_, ja
-    Luftfeuchte Fernbed. _nein_, ja
-    Luftfeuchte: trocken, _normal_, feucht
-    Abluftqualitätsfühler inst. _ja_, nein
-    ext. Luftqualfühl? _nein_, ja
-    Lufqualität: ausreichend, _normal_, hoch
-    el. Nachheizregister inst. _nein_, ja
-    Nachheiz-Zuluft temp: 10-22-30 °C
-    Erdwärmetauscher inst? _nein_, Luft, Sole
-    Taster Funktion: nein, einschlafen, intensiv, bypass, party, kamin
-    ext. Störung aktivieren: _nein_, ja, invertiert
-    Dauer einschlafen: 15-60-120 min
-    Dauer Intensiv: 5-15-60 min
-    Dauer Bypass Abluft: 1-8-12 h
-    Dauer Bypass: 1-8-12 h
-    Dauer PArty 1-8-12 h
-    Dauer Kamin: 5-10-15 min
-    Volumenstromabgleich 90-100-110 %
-    */
 };
 
 } // namespace emsesp