andry/EMS-ESP32
1
0
Fork 0
mirror of https://github.com/emsesp/EMS-ESP32.git synced 2025-12-07 16:29:51 +03:00
Code Issues Packages Projects Releases Wiki Activity

moved shower to settings

Browse Source
This commit is contained in:
proddy
2019-03-16 12:50:36 +01:00
parent d3885f735d
commit 90b278bbf7
1 changed files with 6 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
src/my_config.h
View File

@@ -44,32 +44,24 @@
#define TOPIC_SHOWER_ALERT "shower_alert" // toggle switch for enabling the shower alarm logic
#define TOPIC_SHOWER_COLDSHOT "shower_coldshot" // used to trigger a coldshot from an MQTT command
// default values for shower logic on/off
#define BOILER_SHOWER_TIMER 0 // enable (1) to monitor shower time
#define BOILER_SHOWER_ALERT 0 // enable (1) to send alert of cold water when shower time limit has exceeded
#define SHOWER_MAX_DURATION 420000 // in ms. 7 minutes, before trigger a shot of cold water
// MQTT for EXTERNAL SENSORS
#define TOPIC_EXTERNAL_SENSORS "sensors" // for sending sensor values to MQTT
#define TOPIC_EXTERNAL_SENSORS "sensors" // for sending sensor values to MQTT
////////////////////////////////////////////////////////////////////////////////////////////////////
// THESE DEFAULT VALUES CAN ALSO BE SET AND STORED WITHTIN THE APPLICATION (see 'set' command) //
// ALTHOUGH YOU MAY ALSO HARDCODE THEM HERE BUT THEY WILL BE OVERWRITTEN WITH NEW RELEASE UPDATES //
////////////////////////////////////////////////////////////////////////////////////////////////////
// Set LED pin used for showing ems bus connection status. Solid is connected, Flashing is error
// can be either the onboard LED on the ESP8266 (LED_BULLETIN) or external via an external pull-up LED
// (e.g. D1 on a bbqkees' board
// can be enabled and disabled via the 'set led'
// pin can be set by 'set led_gpio'
// Set LED pin used for showing the EMS bus connection status. Solid means EMS bus working, flashing is an error
// can be either the onboard LED on the ESP8266 (LED_BULLETIN) or external via an external pull-up LED (e.g. D1 on a bbqkees' board)
// can be enabled and disabled via the 'set led' command and pin set by 'set led_gpio'
#define EMSESP_LED_GPIO LED_BUILTIN
// set this if using an external temperature sensor like a DS18B20
// D5 is the default on bbqkees' board
// D5 is the default on a bbqkees board
#define EMSESP_DALLAS_GPIO D5
#define EMSESP_DALLAS_PARASITE false
// By default the EMS bus will be scanned for known devices based on product ids in ems_devices.h
// By default the EMS bus will be scanned for known devices based on the product ids in ems_devices.h
// You can override the Thermostat and Boiler types here
#define EMSESP_BOILER_TYPE EMS_ID_NONE
#define EMSESP_THERMOSTAT_TYPE EMS_ID_NONE