mirror of
https://github.com/emsesp/EMS-ESP32.git
synced 2025-12-06 07:49:52 +03:00
use framework-arduinoespressif32 3.0.1
This commit is contained in:
proddy
@@ -8,10 +8,10 @@
|
||||
#endif
|
||||
|
||||
#if ARDUINO >= 100
|
||||
#include "Arduino.h" // for delayMicroseconds, digitalPinToBitMask, etc
|
||||
#include "Arduino.h" // for delayMicroseconds, digitalPinToBitMask, etc
|
||||
#else
|
||||
#include "WProgram.h" // for delayMicroseconds
|
||||
#include "pins_arduino.h" // for digitalPinToBitMask, etc
|
||||
#include "WProgram.h" // for delayMicroseconds
|
||||
#include "pins_arduino.h" // for digitalPinToBitMask, etc
|
||||
#endif
|
||||
|
||||
// You can exclude certain features from OneWire. In theory, this
|
||||
@@ -53,62 +53,62 @@
|
||||
#define FALSE 0
|
||||
#endif
|
||||
#ifndef TRUE
|
||||
#define TRUE 1
|
||||
#define TRUE 1
|
||||
#endif
|
||||
|
||||
// Platform specific I/O definitions
|
||||
|
||||
#if defined(__AVR__)
|
||||
#define PIN_TO_BASEREG(pin) (portInputRegister(digitalPinToPort(pin)))
|
||||
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
||||
#define PIN_TO_BASEREG(pin) (portInputRegister(digitalPinToPort(pin)))
|
||||
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
||||
#define IO_REG_TYPE uint8_t
|
||||
#define IO_REG_BASE_ATTR asm("r30")
|
||||
#define IO_REG_MASK_ATTR
|
||||
#define DIRECT_READ(base, mask) (((*(base)) & (mask)) ? 1 : 0)
|
||||
#define DIRECT_MODE_INPUT(base, mask) ((*((base)+1)) &= ~(mask))
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) ((*((base)+1)) |= (mask))
|
||||
#define DIRECT_WRITE_LOW(base, mask) ((*((base)+2)) &= ~(mask))
|
||||
#define DIRECT_WRITE_HIGH(base, mask) ((*((base)+2)) |= (mask))
|
||||
#define DIRECT_READ(base, mask) (((*(base)) & (mask)) ? 1 : 0)
|
||||
#define DIRECT_MODE_INPUT(base, mask) ((*((base) + 1)) &= ~(mask))
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) ((*((base) + 1)) |= (mask))
|
||||
#define DIRECT_WRITE_LOW(base, mask) ((*((base) + 2)) &= ~(mask))
|
||||
#define DIRECT_WRITE_HIGH(base, mask) ((*((base) + 2)) |= (mask))
|
||||
|
||||
#elif defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK66FX1M0__) || defined(__MK64FX512__)
|
||||
#define PIN_TO_BASEREG(pin) (portOutputRegister(pin))
|
||||
#define PIN_TO_BITMASK(pin) (1)
|
||||
#define PIN_TO_BASEREG(pin) (portOutputRegister(pin))
|
||||
#define PIN_TO_BITMASK(pin) (1)
|
||||
#define IO_REG_TYPE uint8_t
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR __attribute__ ((unused))
|
||||
#define DIRECT_READ(base, mask) (*((base)+512))
|
||||
#define DIRECT_MODE_INPUT(base, mask) (*((base)+640) = 0)
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) (*((base)+640) = 1)
|
||||
#define DIRECT_WRITE_LOW(base, mask) (*((base)+256) = 1)
|
||||
#define DIRECT_WRITE_HIGH(base, mask) (*((base)+128) = 1)
|
||||
#define IO_REG_MASK_ATTR __attribute__((unused))
|
||||
#define DIRECT_READ(base, mask) (*((base) + 512))
|
||||
#define DIRECT_MODE_INPUT(base, mask) (*((base) + 640) = 0)
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) (*((base) + 640) = 1)
|
||||
#define DIRECT_WRITE_LOW(base, mask) (*((base) + 256) = 1)
|
||||
#define DIRECT_WRITE_HIGH(base, mask) (*((base) + 128) = 1)
|
||||
|
||||
#elif defined(__MKL26Z64__)
|
||||
#define PIN_TO_BASEREG(pin) (portOutputRegister(pin))
|
||||
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
||||
#define PIN_TO_BASEREG(pin) (portOutputRegister(pin))
|
||||
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
||||
#define IO_REG_TYPE uint8_t
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR
|
||||
#define DIRECT_READ(base, mask) ((*((base)+16) & (mask)) ? 1 : 0)
|
||||
#define DIRECT_MODE_INPUT(base, mask) (*((base)+20) &= ~(mask))
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) (*((base)+20) |= (mask))
|
||||
#define DIRECT_WRITE_LOW(base, mask) (*((base)+8) = (mask))
|
||||
#define DIRECT_WRITE_HIGH(base, mask) (*((base)+4) = (mask))
|
||||
#define DIRECT_READ(base, mask) ((*((base) + 16) & (mask)) ? 1 : 0)
|
||||
#define DIRECT_MODE_INPUT(base, mask) (*((base) + 20) &= ~(mask))
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) (*((base) + 20) |= (mask))
|
||||
#define DIRECT_WRITE_LOW(base, mask) (*((base) + 8) = (mask))
|
||||
#define DIRECT_WRITE_HIGH(base, mask) (*((base) + 4) = (mask))
|
||||
|
||||
#elif defined(__SAM3X8E__) || defined(__SAM3A8C__) || defined(__SAM3A4C__)
|
||||
// Arduino 1.5.1 may have a bug in delayMicroseconds() on Arduino Due.
|
||||
// http://arduino.cc/forum/index.php/topic,141030.msg1076268.html#msg1076268
|
||||
// If you have trouble with OneWire on Arduino Due, please check the
|
||||
// status of delayMicroseconds() before reporting a bug in OneWire!
|
||||
#define PIN_TO_BASEREG(pin) (&(digitalPinToPort(pin)->PIO_PER))
|
||||
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
||||
#define PIN_TO_BASEREG(pin) (&(digitalPinToPort(pin)->PIO_PER))
|
||||
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
||||
#define IO_REG_TYPE uint32_t
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR
|
||||
#define DIRECT_READ(base, mask) (((*((base)+15)) & (mask)) ? 1 : 0)
|
||||
#define DIRECT_MODE_INPUT(base, mask) ((*((base)+5)) = (mask))
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) ((*((base)+4)) = (mask))
|
||||
#define DIRECT_WRITE_LOW(base, mask) ((*((base)+13)) = (mask))
|
||||
#define DIRECT_WRITE_HIGH(base, mask) ((*((base)+12)) = (mask))
|
||||
#define DIRECT_READ(base, mask) (((*((base) + 15)) & (mask)) ? 1 : 0)
|
||||
#define DIRECT_MODE_INPUT(base, mask) ((*((base) + 5)) = (mask))
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) ((*((base) + 4)) = (mask))
|
||||
#define DIRECT_WRITE_LOW(base, mask) ((*((base) + 13)) = (mask))
|
||||
#define DIRECT_WRITE_HIGH(base, mask) ((*((base) + 12)) = (mask))
|
||||
#ifndef PROGMEM
|
||||
#define PROGMEM
|
||||
#endif
|
||||
@@ -117,16 +117,16 @@
|
||||
#endif
|
||||
|
||||
#elif defined(__PIC32MX__)
|
||||
#define PIN_TO_BASEREG(pin) (portModeRegister(digitalPinToPort(pin)))
|
||||
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
||||
#define PIN_TO_BASEREG(pin) (portModeRegister(digitalPinToPort(pin)))
|
||||
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
||||
#define IO_REG_TYPE uint32_t
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR
|
||||
#define DIRECT_READ(base, mask) (((*(base+4)) & (mask)) ? 1 : 0) //PORTX + 0x10
|
||||
#define DIRECT_MODE_INPUT(base, mask) ((*(base+2)) = (mask)) //TRISXSET + 0x08
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) ((*(base+1)) = (mask)) //TRISXCLR + 0x04
|
||||
#define DIRECT_WRITE_LOW(base, mask) ((*(base+8+1)) = (mask)) //LATXCLR + 0x24
|
||||
#define DIRECT_WRITE_HIGH(base, mask) ((*(base+8+2)) = (mask)) //LATXSET + 0x28
|
||||
#define DIRECT_READ(base, mask) (((*(base + 4)) & (mask)) ? 1 : 0) //PORTX + 0x10
|
||||
#define DIRECT_MODE_INPUT(base, mask) ((*(base + 2)) = (mask)) //TRISXSET + 0x08
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) ((*(base + 1)) = (mask)) //TRISXCLR + 0x04
|
||||
#define DIRECT_WRITE_LOW(base, mask) ((*(base + 8 + 1)) = (mask)) //LATXCLR + 0x24
|
||||
#define DIRECT_WRITE_HIGH(base, mask) ((*(base + 8 + 2)) = (mask)) //LATXSET + 0x28
|
||||
|
||||
#elif defined(ARDUINO_ARCH_ESP8266)
|
||||
// Special note: I depend on the ESP community to maintain these definitions and
|
||||
@@ -134,155 +134,140 @@
|
||||
// resolve any problems related to ESP chips. Please do not contact me and please
|
||||
// DO NOT CREATE GITHUB ISSUES for ESP support. All ESP questions must be asked
|
||||
// on ESP community forums.
|
||||
#define PIN_TO_BASEREG(pin) ((volatile uint32_t*) GPO)
|
||||
#define PIN_TO_BITMASK(pin) (1 << pin)
|
||||
#define PIN_TO_BASEREG(pin) ((volatile uint32_t *)GPO)
|
||||
#define PIN_TO_BITMASK(pin) (1 << pin)
|
||||
#define IO_REG_TYPE uint32_t
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR
|
||||
#define DIRECT_READ(base, mask) ((GPI & (mask)) ? 1 : 0) //GPIO_IN_ADDRESS
|
||||
#define DIRECT_MODE_INPUT(base, mask) (GPE &= ~(mask)) //GPIO_ENABLE_W1TC_ADDRESS
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) (GPE |= (mask)) //GPIO_ENABLE_W1TS_ADDRESS
|
||||
#define DIRECT_WRITE_LOW(base, mask) (GPOC = (mask)) //GPIO_OUT_W1TC_ADDRESS
|
||||
#define DIRECT_WRITE_HIGH(base, mask) (GPOS = (mask)) //GPIO_OUT_W1TS_ADDRESS
|
||||
#define DIRECT_READ(base, mask) ((GPI & (mask)) ? 1 : 0) //GPIO_IN_ADDRESS
|
||||
#define DIRECT_MODE_INPUT(base, mask) (GPE &= ~(mask)) //GPIO_ENABLE_W1TC_ADDRESS
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) (GPE |= (mask)) //GPIO_ENABLE_W1TS_ADDRESS
|
||||
#define DIRECT_WRITE_LOW(base, mask) (GPOC = (mask)) //GPIO_OUT_W1TC_ADDRESS
|
||||
#define DIRECT_WRITE_HIGH(base, mask) (GPOS = (mask)) //GPIO_OUT_W1TS_ADDRESS
|
||||
|
||||
#elif defined(ARDUINO_ARCH_ESP32)
|
||||
#include <driver/rtc_io.h>
|
||||
#include <soc/gpio_struct.h>
|
||||
#if ESP_IDF_VERSION_MAJOR >= 5
|
||||
#include "soc/gpio_periph.h"
|
||||
#endif // ESP_IDF_VERSION_MAJOR >= 5
|
||||
#define PIN_TO_BASEREG(pin) (0)
|
||||
#define PIN_TO_BITMASK(pin) (pin)
|
||||
#define PIN_TO_BASEREG(pin) (0)
|
||||
#define PIN_TO_BITMASK(pin) (pin)
|
||||
#define IO_REG_TYPE uint32_t
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
IO_REG_TYPE directRead(IO_REG_TYPE pin)
|
||||
{
|
||||
static inline __attribute__((always_inline)) IO_REG_TYPE directRead(IO_REG_TYPE pin) {
|
||||
// return digitalRead(pin); // Works most of the time
|
||||
// return gpio_ll_get_level(&GPIO, pin); // The hal is not public api, don't use in application code
|
||||
|
||||
//#if CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6
|
||||
#if SOC_GPIO_PIN_COUNT <= 32
|
||||
return (GPIO.in.val >> pin) & 0x1;
|
||||
#else // ESP32 with over 32 gpios
|
||||
if ( pin < 32 )
|
||||
#else // ESP32 with over 32 gpios
|
||||
if (pin < 32)
|
||||
return (GPIO.in >> pin) & 0x1;
|
||||
else
|
||||
return (GPIO.in1.val >> (pin - 32)) & 0x1;
|
||||
#endif
|
||||
return 0;
|
||||
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directWriteLow(IO_REG_TYPE pin)
|
||||
{
|
||||
static inline __attribute__((always_inline)) void directWriteLow(IO_REG_TYPE pin) {
|
||||
// digitalWrite(pin, 0); // Works most of the time
|
||||
// gpio_ll_set_level(&GPIO, pin, 0); // The hal is not public api, don't use in application code
|
||||
|
||||
//#if CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6
|
||||
#if SOC_GPIO_PIN_COUNT <= 32
|
||||
GPIO.out_w1tc.val = ((uint32_t)1 << pin);
|
||||
#else // ESP32 with over 32 gpios
|
||||
if ( pin < 32 )
|
||||
#else // ESP32 with over 32 gpios
|
||||
if (pin < 32)
|
||||
GPIO.out_w1tc = ((uint32_t)1 << pin);
|
||||
else
|
||||
GPIO.out1_w1tc.val = ((uint32_t)1 << (pin - 32));
|
||||
#endif
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directWriteHigh(IO_REG_TYPE pin)
|
||||
{
|
||||
static inline __attribute__((always_inline)) void directWriteHigh(IO_REG_TYPE pin) {
|
||||
// digitalWrite(pin, 1); // Works most of the time
|
||||
// gpio_ll_set_level(&GPIO, pin, 1); // The hal is not public api, don't use in application code
|
||||
|
||||
//#if CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6
|
||||
#if SOC_GPIO_PIN_COUNT <= 32
|
||||
GPIO.out_w1ts.val = ((uint32_t)1 << pin);
|
||||
#else // ESP32 with over 32 gpios
|
||||
if ( pin < 32 )
|
||||
#else // ESP32 with over 32 gpios
|
||||
if (pin < 32)
|
||||
GPIO.out_w1ts = ((uint32_t)1 << pin);
|
||||
else
|
||||
GPIO.out1_w1ts.val = ((uint32_t)1 << (pin - 32));
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directModeInput(IO_REG_TYPE pin)
|
||||
{
|
||||
// pinMode(pin, INPUT); // Too slow - doesn't work
|
||||
// gpio_ll_output_disable(&GPIO, pin); // The hal is not public api, don't use in application code
|
||||
static inline __attribute__((always_inline)) void directModeInput(IO_REG_TYPE pin) {
|
||||
// pinMode(pin, INPUT); // Too slow - doesn't work
|
||||
// gpio_ll_output_disable(&GPIO, pin); // The hal is not public api, don't use in application code
|
||||
|
||||
if ( digitalPinIsValid(pin) )
|
||||
{
|
||||
if (digitalPinIsValid(pin)) {
|
||||
// Input
|
||||
//#if CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6
|
||||
#if SOC_GPIO_PIN_COUNT <= 32
|
||||
GPIO.enable_w1tc.val = ((uint32_t)1 << (pin));
|
||||
#else // ESP32 with over 32 gpios
|
||||
if ( pin < 32 )
|
||||
#else // ESP32 with over 32 gpios
|
||||
if (pin < 32)
|
||||
GPIO.enable_w1tc = ((uint32_t)1 << pin);
|
||||
else
|
||||
GPIO.enable1_w1tc.val = ((uint32_t)1 << (pin - 32));
|
||||
#endif
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directModeOutput(IO_REG_TYPE pin)
|
||||
{
|
||||
// pinMode(pin, OUTPUT); // Too slow - doesn't work
|
||||
// gpio_ll_output_enable(&GPIO, pin); // The hal is not public api, don't use in application code
|
||||
static inline __attribute__((always_inline)) void directModeOutput(IO_REG_TYPE pin) {
|
||||
// pinMode(pin, OUTPUT); // Too slow - doesn't work
|
||||
// gpio_ll_output_enable(&GPIO, pin); // The hal is not public api, don't use in application code
|
||||
|
||||
if ( digitalPinCanOutput(pin) )
|
||||
{
|
||||
if (digitalPinCanOutput(pin)) {
|
||||
// Output
|
||||
//#if CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6
|
||||
#if SOC_GPIO_PIN_COUNT <= 32
|
||||
GPIO.enable_w1ts.val = ((uint32_t)1 << (pin));
|
||||
#else // ESP32 with over 32 gpios
|
||||
if ( pin < 32 )
|
||||
#else // ESP32 with over 32 gpios
|
||||
if (pin < 32)
|
||||
GPIO.enable_w1ts = ((uint32_t)1 << pin);
|
||||
else
|
||||
GPIO.enable1_w1ts.val = ((uint32_t)1 << (pin - 32));
|
||||
#endif
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
#define DIRECT_READ(base, pin) directRead(pin)
|
||||
#define DIRECT_WRITE_LOW(base, pin) directWriteLow(pin)
|
||||
#define DIRECT_WRITE_HIGH(base, pin) directWriteHigh(pin)
|
||||
#define DIRECT_MODE_INPUT(base, pin) directModeInput(pin)
|
||||
#define DIRECT_MODE_OUTPUT(base, pin) directModeOutput(pin)
|
||||
#define DIRECT_READ(base, pin) directRead(pin)
|
||||
#define DIRECT_WRITE_LOW(base, pin) directWriteLow(pin)
|
||||
#define DIRECT_WRITE_HIGH(base, pin) directWriteHigh(pin)
|
||||
#define DIRECT_MODE_INPUT(base, pin) directModeInput(pin)
|
||||
#define DIRECT_MODE_OUTPUT(base, pin) directModeOutput(pin)
|
||||
|
||||
#elif defined(__SAMD21G18A__)
|
||||
#define PIN_TO_BASEREG(pin) portModeRegister(digitalPinToPort(pin))
|
||||
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
||||
#define PIN_TO_BASEREG(pin) portModeRegister(digitalPinToPort(pin))
|
||||
#define PIN_TO_BITMASK(pin) (digitalPinToBitMask(pin))
|
||||
#define IO_REG_TYPE uint32_t
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR
|
||||
#define DIRECT_READ(base, mask) (((*((base)+8)) & (mask)) ? 1 : 0)
|
||||
#define DIRECT_MODE_INPUT(base, mask) ((*((base)+1)) = (mask))
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) ((*((base)+2)) = (mask))
|
||||
#define DIRECT_WRITE_LOW(base, mask) ((*((base)+5)) = (mask))
|
||||
#define DIRECT_WRITE_HIGH(base, mask) ((*((base)+6)) = (mask))
|
||||
#define DIRECT_READ(base, mask) (((*((base) + 8)) & (mask)) ? 1 : 0)
|
||||
#define DIRECT_MODE_INPUT(base, mask) ((*((base) + 1)) = (mask))
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) ((*((base) + 2)) = (mask))
|
||||
#define DIRECT_WRITE_LOW(base, mask) ((*((base) + 5)) = (mask))
|
||||
#define DIRECT_WRITE_HIGH(base, mask) ((*((base) + 6)) = (mask))
|
||||
|
||||
#elif defined(RBL_NRF51822)
|
||||
#define PIN_TO_BASEREG(pin) (0)
|
||||
#define PIN_TO_BITMASK(pin) (pin)
|
||||
#define PIN_TO_BASEREG(pin) (0)
|
||||
#define PIN_TO_BITMASK(pin) (pin)
|
||||
#define IO_REG_TYPE uint32_t
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR
|
||||
#define DIRECT_READ(base, pin) nrf_gpio_pin_read(pin)
|
||||
#define DIRECT_WRITE_LOW(base, pin) nrf_gpio_pin_clear(pin)
|
||||
#define DIRECT_WRITE_HIGH(base, pin) nrf_gpio_pin_set(pin)
|
||||
#define DIRECT_MODE_INPUT(base, pin) nrf_gpio_cfg_input(pin, NRF_GPIO_PIN_NOPULL)
|
||||
#define DIRECT_MODE_OUTPUT(base, pin) nrf_gpio_cfg_output(pin)
|
||||
#define DIRECT_READ(base, pin) nrf_gpio_pin_read(pin)
|
||||
#define DIRECT_WRITE_LOW(base, pin) nrf_gpio_pin_clear(pin)
|
||||
#define DIRECT_WRITE_HIGH(base, pin) nrf_gpio_pin_set(pin)
|
||||
#define DIRECT_MODE_INPUT(base, pin) nrf_gpio_cfg_input(pin, NRF_GPIO_PIN_NOPULL)
|
||||
#define DIRECT_MODE_OUTPUT(base, pin) nrf_gpio_cfg_output(pin)
|
||||
|
||||
#elif defined(__arc__) /* Arduino101/Genuino101 specifics */
|
||||
|
||||
@@ -290,24 +275,22 @@ void directModeOutput(IO_REG_TYPE pin)
|
||||
#include "portable.h"
|
||||
#include "avr/pgmspace.h"
|
||||
|
||||
#define GPIO_ID(pin) (g_APinDescription[pin].ulGPIOId)
|
||||
#define GPIO_TYPE(pin) (g_APinDescription[pin].ulGPIOType)
|
||||
#define GPIO_BASE(pin) (g_APinDescription[pin].ulGPIOBase)
|
||||
#define DIR_OFFSET_SS 0x01
|
||||
#define DIR_OFFSET_SOC 0x04
|
||||
#define EXT_PORT_OFFSET_SS 0x0A
|
||||
#define EXT_PORT_OFFSET_SOC 0x50
|
||||
#define GPIO_ID(pin) (g_APinDescription[pin].ulGPIOId)
|
||||
#define GPIO_TYPE(pin) (g_APinDescription[pin].ulGPIOType)
|
||||
#define GPIO_BASE(pin) (g_APinDescription[pin].ulGPIOBase)
|
||||
#define DIR_OFFSET_SS 0x01
|
||||
#define DIR_OFFSET_SOC 0x04
|
||||
#define EXT_PORT_OFFSET_SS 0x0A
|
||||
#define EXT_PORT_OFFSET_SOC 0x50
|
||||
|
||||
/* GPIO registers base address */
|
||||
#define PIN_TO_BASEREG(pin) ((volatile uint32_t *)g_APinDescription[pin].ulGPIOBase)
|
||||
#define PIN_TO_BITMASK(pin) pin
|
||||
#define IO_REG_TYPE uint32_t
|
||||
#define PIN_TO_BASEREG(pin) ((volatile uint32_t *)g_APinDescription[pin].ulGPIOBase)
|
||||
#define PIN_TO_BITMASK(pin) pin
|
||||
#define IO_REG_TYPE uint32_t
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
IO_REG_TYPE directRead(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
||||
{
|
||||
static inline __attribute__((always_inline)) IO_REG_TYPE directRead(volatile IO_REG_TYPE * base, IO_REG_TYPE pin) {
|
||||
IO_REG_TYPE ret;
|
||||
if (SS_GPIO == GPIO_TYPE(pin)) {
|
||||
ret = READ_ARC_REG(((IO_REG_TYPE)base + EXT_PORT_OFFSET_SS));
|
||||
@@ -317,31 +300,23 @@ IO_REG_TYPE directRead(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
||||
return ((ret >> GPIO_ID(pin)) & 0x01);
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directModeInput(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
||||
{
|
||||
static inline __attribute__((always_inline)) void directModeInput(volatile IO_REG_TYPE * base, IO_REG_TYPE pin) {
|
||||
if (SS_GPIO == GPIO_TYPE(pin)) {
|
||||
WRITE_ARC_REG(READ_ARC_REG((((IO_REG_TYPE)base) + DIR_OFFSET_SS)) & ~(0x01 << GPIO_ID(pin)),
|
||||
((IO_REG_TYPE)(base) + DIR_OFFSET_SS));
|
||||
WRITE_ARC_REG(READ_ARC_REG((((IO_REG_TYPE)base) + DIR_OFFSET_SS)) & ~(0x01 << GPIO_ID(pin)), ((IO_REG_TYPE)(base) + DIR_OFFSET_SS));
|
||||
} else {
|
||||
MMIO_REG_VAL_FROM_BASE((IO_REG_TYPE)base, DIR_OFFSET_SOC) &= ~(0x01 << GPIO_ID(pin));
|
||||
}
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directModeOutput(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
||||
{
|
||||
static inline __attribute__((always_inline)) void directModeOutput(volatile IO_REG_TYPE * base, IO_REG_TYPE pin) {
|
||||
if (SS_GPIO == GPIO_TYPE(pin)) {
|
||||
WRITE_ARC_REG(READ_ARC_REG(((IO_REG_TYPE)(base) + DIR_OFFSET_SS)) | (0x01 << GPIO_ID(pin)),
|
||||
((IO_REG_TYPE)(base) + DIR_OFFSET_SS));
|
||||
WRITE_ARC_REG(READ_ARC_REG(((IO_REG_TYPE)(base) + DIR_OFFSET_SS)) | (0x01 << GPIO_ID(pin)), ((IO_REG_TYPE)(base) + DIR_OFFSET_SS));
|
||||
} else {
|
||||
MMIO_REG_VAL_FROM_BASE((IO_REG_TYPE)base, DIR_OFFSET_SOC) |= (0x01 << GPIO_ID(pin));
|
||||
}
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directWriteLow(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
||||
{
|
||||
static inline __attribute__((always_inline)) void directWriteLow(volatile IO_REG_TYPE * base, IO_REG_TYPE pin) {
|
||||
if (SS_GPIO == GPIO_TYPE(pin)) {
|
||||
WRITE_ARC_REG(READ_ARC_REG(base) & ~(0x01 << GPIO_ID(pin)), base);
|
||||
} else {
|
||||
@@ -349,9 +324,7 @@ void directWriteLow(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
||||
}
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directWriteHigh(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
||||
{
|
||||
static inline __attribute__((always_inline)) void directWriteHigh(volatile IO_REG_TYPE * base, IO_REG_TYPE pin) {
|
||||
if (SS_GPIO == GPIO_TYPE(pin)) {
|
||||
WRITE_ARC_REG(READ_ARC_REG(base) | (0x01 << GPIO_ID(pin)), base);
|
||||
} else {
|
||||
@@ -359,11 +332,11 @@ void directWriteHigh(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
||||
}
|
||||
}
|
||||
|
||||
#define DIRECT_READ(base, pin) directRead(base, pin)
|
||||
#define DIRECT_MODE_INPUT(base, pin) directModeInput(base, pin)
|
||||
#define DIRECT_READ(base, pin) directRead(base, pin)
|
||||
#define DIRECT_MODE_INPUT(base, pin) directModeInput(base, pin)
|
||||
#define DIRECT_MODE_OUTPUT(base, pin) directModeOutput(base, pin)
|
||||
#define DIRECT_WRITE_LOW(base, pin) directWriteLow(base, pin)
|
||||
#define DIRECT_WRITE_HIGH(base, pin) directWriteHigh(base, pin)
|
||||
#define DIRECT_WRITE_HIGH(base, pin) directWriteHigh(base, pin)
|
||||
|
||||
#elif defined(__riscv)
|
||||
|
||||
@@ -374,89 +347,81 @@ void directWriteHigh(volatile IO_REG_TYPE *base, IO_REG_TYPE pin)
|
||||
* two high speed modes of the highfive1. It
|
||||
* seems to be less reliable in slow mode.
|
||||
*/
|
||||
#define PIN_TO_BASEREG(pin) (0)
|
||||
#define PIN_TO_BITMASK(pin) digitalPinToBitMask(pin)
|
||||
#define PIN_TO_BASEREG(pin) (0)
|
||||
#define PIN_TO_BITMASK(pin) digitalPinToBitMask(pin)
|
||||
#define IO_REG_TYPE uint32_t
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
IO_REG_TYPE directRead(IO_REG_TYPE mask)
|
||||
{
|
||||
static inline __attribute__((always_inline)) IO_REG_TYPE directRead(IO_REG_TYPE mask) {
|
||||
return ((GPIO_REG(GPIO_INPUT_VAL) & mask) != 0) ? 1 : 0;
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directModeInput(IO_REG_TYPE mask)
|
||||
{
|
||||
GPIO_REG(GPIO_OUTPUT_XOR) &= ~mask;
|
||||
GPIO_REG(GPIO_IOF_EN) &= ~mask;
|
||||
static inline __attribute__((always_inline)) void directModeInput(IO_REG_TYPE mask) {
|
||||
GPIO_REG(GPIO_OUTPUT_XOR) &= ~mask;
|
||||
GPIO_REG(GPIO_IOF_EN) &= ~mask;
|
||||
|
||||
GPIO_REG(GPIO_INPUT_EN) |= mask;
|
||||
GPIO_REG(GPIO_INPUT_EN) |= mask;
|
||||
GPIO_REG(GPIO_OUTPUT_EN) &= ~mask;
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directModeOutput(IO_REG_TYPE mask)
|
||||
{
|
||||
GPIO_REG(GPIO_OUTPUT_XOR) &= ~mask;
|
||||
GPIO_REG(GPIO_IOF_EN) &= ~mask;
|
||||
static inline __attribute__((always_inline)) void directModeOutput(IO_REG_TYPE mask) {
|
||||
GPIO_REG(GPIO_OUTPUT_XOR) &= ~mask;
|
||||
GPIO_REG(GPIO_IOF_EN) &= ~mask;
|
||||
|
||||
GPIO_REG(GPIO_INPUT_EN) &= ~mask;
|
||||
GPIO_REG(GPIO_OUTPUT_EN) |= mask;
|
||||
GPIO_REG(GPIO_INPUT_EN) &= ~mask;
|
||||
GPIO_REG(GPIO_OUTPUT_EN) |= mask;
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directWriteLow(IO_REG_TYPE mask)
|
||||
{
|
||||
static inline __attribute__((always_inline)) void directWriteLow(IO_REG_TYPE mask) {
|
||||
GPIO_REG(GPIO_OUTPUT_VAL) &= ~mask;
|
||||
}
|
||||
|
||||
static inline __attribute__((always_inline))
|
||||
void directWriteHigh(IO_REG_TYPE mask)
|
||||
{
|
||||
static inline __attribute__((always_inline)) void directWriteHigh(IO_REG_TYPE mask) {
|
||||
GPIO_REG(GPIO_OUTPUT_VAL) |= mask;
|
||||
}
|
||||
|
||||
#define DIRECT_READ(base, mask) directRead(mask)
|
||||
#define DIRECT_WRITE_LOW(base, mask) directWriteLow(mask)
|
||||
#define DIRECT_WRITE_HIGH(base, mask) directWriteHigh(mask)
|
||||
#define DIRECT_MODE_INPUT(base, mask) directModeInput(mask)
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) directModeOutput(mask)
|
||||
#define DIRECT_READ(base, mask) directRead(mask)
|
||||
#define DIRECT_WRITE_LOW(base, mask) directWriteLow(mask)
|
||||
#define DIRECT_WRITE_HIGH(base, mask) directWriteHigh(mask)
|
||||
#define DIRECT_MODE_INPUT(base, mask) directModeInput(mask)
|
||||
#define DIRECT_MODE_OUTPUT(base, mask) directModeOutput(mask)
|
||||
|
||||
#else
|
||||
#define PIN_TO_BASEREG(pin) (0)
|
||||
#define PIN_TO_BITMASK(pin) (pin)
|
||||
#define PIN_TO_BASEREG(pin) (0)
|
||||
#define PIN_TO_BITMASK(pin) (pin)
|
||||
#define IO_REG_TYPE unsigned int
|
||||
#define IO_REG_BASE_ATTR
|
||||
#define IO_REG_MASK_ATTR
|
||||
#define DIRECT_READ(base, pin) digitalRead(pin)
|
||||
#define DIRECT_WRITE_LOW(base, pin) digitalWrite(pin, LOW)
|
||||
#define DIRECT_WRITE_HIGH(base, pin) digitalWrite(pin, HIGH)
|
||||
#define DIRECT_MODE_INPUT(base, pin) pinMode(pin,INPUT)
|
||||
#define DIRECT_MODE_OUTPUT(base, pin) pinMode(pin,OUTPUT)
|
||||
#define DIRECT_READ(base, pin) digitalRead(pin)
|
||||
#define DIRECT_WRITE_LOW(base, pin) digitalWrite(pin, LOW)
|
||||
#define DIRECT_WRITE_HIGH(base, pin) digitalWrite(pin, HIGH)
|
||||
#define DIRECT_MODE_INPUT(base, pin) pinMode(pin, INPUT)
|
||||
#define DIRECT_MODE_OUTPUT(base, pin) pinMode(pin, OUTPUT)
|
||||
#warning "OneWire. Fallback mode. Using API calls for pinMode,digitalRead and digitalWrite. Operation of this library is not guaranteed on this architecture."
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
class OneWire
|
||||
{
|
||||
class OneWire {
|
||||
private:
|
||||
IO_REG_TYPE bitmask;
|
||||
volatile IO_REG_TYPE *baseReg;
|
||||
IO_REG_TYPE bitmask;
|
||||
volatile IO_REG_TYPE * baseReg;
|
||||
|
||||
#if ONEWIRE_SEARCH
|
||||
// global search state
|
||||
unsigned char ROM_NO[8];
|
||||
uint8_t LastDiscrepancy;
|
||||
uint8_t LastFamilyDiscrepancy;
|
||||
uint8_t LastDeviceFlag;
|
||||
uint8_t LastDiscrepancy;
|
||||
uint8_t LastFamilyDiscrepancy;
|
||||
uint8_t LastDeviceFlag;
|
||||
#endif
|
||||
|
||||
public:
|
||||
OneWire() { }
|
||||
OneWire(uint8_t pin) { begin(pin); }
|
||||
OneWire() {
|
||||
}
|
||||
OneWire(uint8_t pin) {
|
||||
begin(pin);
|
||||
}
|
||||
void begin(uint8_t pin);
|
||||
// OneWire( uint8_t pin);
|
||||
|
||||
@@ -477,12 +442,12 @@ class OneWire
|
||||
// another read or write.
|
||||
void write(uint8_t v, uint8_t power = 0);
|
||||
|
||||
void write_bytes(const uint8_t *buf, uint16_t count, bool power = 0);
|
||||
void write_bytes(const uint8_t * buf, uint16_t count, bool power = 0);
|
||||
|
||||
// Read a byte.
|
||||
uint8_t read(void);
|
||||
|
||||
void read_bytes(uint8_t *buf, uint16_t count);
|
||||
void read_bytes(uint8_t * buf, uint16_t count);
|
||||
|
||||
// Write a bit. The bus is always left powered at the end, see
|
||||
// note in write() about that.
|
||||
@@ -512,13 +477,13 @@ class OneWire
|
||||
// might be a good idea to check the CRC to make sure you didn't
|
||||
// get garbage. The order is deterministic. You will always get
|
||||
// the same devices in the same order.
|
||||
uint8_t search(uint8_t *newAddr, bool search_mode = true);
|
||||
uint8_t search(uint8_t * newAddr, bool search_mode = true);
|
||||
#endif
|
||||
|
||||
#if ONEWIRE_CRC
|
||||
// Compute a Dallas Semiconductor 8 bit CRC, these are used in the
|
||||
// ROM and scratchpad registers.
|
||||
static uint8_t crc8(const uint8_t *addr, uint8_t len);
|
||||
static uint8_t crc8(const uint8_t * addr, uint8_t len);
|
||||
|
||||
#if ONEWIRE_CRC16
|
||||
// Compute the 1-Wire CRC16 and compare it against the received CRC.
|
||||
@@ -541,7 +506,7 @@ class OneWire
|
||||
// *not* at a 16-bit integer.
|
||||
// @param crc - The crc starting value (optional)
|
||||
// @return True, iff the CRC matches.
|
||||
static bool check_crc16(const uint8_t* input, uint16_t len, const uint8_t* inverted_crc, uint16_t crc = 0);
|
||||
static bool check_crc16(const uint8_t * input, uint16_t len, const uint8_t * inverted_crc, uint16_t crc = 0);
|
||||
|
||||
// Compute a Dallas Semiconductor 16 bit CRC. This is required to check
|
||||
// the integrity of data received from many 1-Wire devices. Note that the
|
||||
@@ -555,7 +520,7 @@ class OneWire
|
||||
// @param len - How many bytes to use.
|
||||
// @param crc - The crc starting value (optional)
|
||||
// @return The CRC16, as defined by Dallas Semiconductor.
|
||||
static uint16_t crc16(const uint8_t* input, uint16_t len, uint16_t crc = 0);
|
||||
static uint16_t crc16(const uint8_t * input, uint16_t len, uint16_t crc = 0);
|
||||
#endif
|
||||
#endif
|
||||
};
|
||||
|
||||
@@ -138,7 +138,7 @@ void TelnetService::loop() {
|
||||
}
|
||||
}
|
||||
|
||||
WiFiClient client = server_.available();
|
||||
WiFiClient client = server_.accept();
|
||||
if (client) {
|
||||
if (connections_.size() >= maximum_connections_) {
|
||||
#if UUID_TELNET_HAVE_WIFICLIENT_REMOTE
|
||||
|
||||
@@ -6,13 +6,14 @@
|
||||
default_envs = lolin_s3
|
||||
; default_envs = esp32_16M
|
||||
; default_envs = standalone
|
||||
; default_envs = espressi32_v3
|
||||
|
||||
extra_configs =
|
||||
factory_settings.ini
|
||||
pio_local.ini
|
||||
|
||||
[common]
|
||||
core_build_flags = -std=gnu++2a -Isrc
|
||||
core_build_flags = -std=gnu++2a -Isrc -Wno-type-limits
|
||||
core_unbuild_flags = -std=gnu++11
|
||||
|
||||
; my_build_flags is set in pio_local.ini
|
||||
@@ -37,7 +38,7 @@ unbuild_flags =
|
||||
${common.core_unbuild_flags}
|
||||
|
||||
[espressi32_base]
|
||||
platform = espressif32@6.7.0
|
||||
platform = espressif32
|
||||
framework = arduino
|
||||
board_build.filesystem = littlefs
|
||||
build_flags =
|
||||
@@ -50,9 +51,9 @@ extra_scripts =
|
||||
[espressi32_base_tasmota]
|
||||
; use Tasmota's library which removes some unused libs (like mbedtsl, so no WiFi_secure.h) and increases available heap
|
||||
; Tasmota Arduino Core 2.0.17 with IPv6 support, based on IDF 4.4.7
|
||||
platform = https://github.com/tasmota/platform-espressif32/releases/download/2024.05.00/platform-espressif32.zip
|
||||
; Tasmota Arduino Core 3.0.0.240529 based on IDF v5.1.4.240528
|
||||
; platform = https://github.com/tasmota/platform-espressif32/releases/download/2024.05.13/platform-espressif32.zip
|
||||
; platform = https://github.com/tasmota/platform-espressif32/releases/download/2024.05.00/platform-espressif32.zip
|
||||
; Tasmota Arduino Core 3.0.1.240605 based on IDF v5.1.4.240602
|
||||
platform = https://github.com/tasmota/platform-espressif32/releases/download/2024.06.10/platform-espressif32.zip
|
||||
framework = arduino
|
||||
board_build.filesystem = littlefs
|
||||
build_flags =
|
||||
@@ -79,8 +80,9 @@ lib_deps =
|
||||
bblanchon/ArduinoJson@^7.0.4
|
||||
|
||||
; build for GitHub Actions CI
|
||||
; the Web interface is built seperately, so is skipper in extra_scripts
|
||||
; the Web interface is built seperately, so is skipped in extra_scripts
|
||||
[env:ci]
|
||||
; 4MB using Tasmota (no SSL)
|
||||
extends = espressi32_base_tasmota
|
||||
extra_scripts = scripts/rename_fw.py
|
||||
board = esp32dev
|
||||
@@ -88,6 +90,7 @@ board_build.partitions = esp32_partition_4M.csv
|
||||
board_build.extra_flags = -DBOARD_HAS_PSRAM
|
||||
|
||||
[env:ci_s3]
|
||||
; 16MB ESP32-S3
|
||||
extends = espressi32_base
|
||||
extra_scripts = scripts/rename_fw.py
|
||||
board = lolin_s3
|
||||
@@ -100,6 +103,7 @@ build_flags =
|
||||
'-DEMSESP_DEFAULT_BOARD_PROFILE="S32S3"'
|
||||
|
||||
[env:ci_16M]
|
||||
; 16MB ESP32 with PSRAM
|
||||
extends = espressi32_base
|
||||
extra_scripts = scripts/rename_fw.py
|
||||
board = esp32dev
|
||||
@@ -109,6 +113,8 @@ build_flags =
|
||||
${espressi32_base.build_flags}
|
||||
'-DEMSESP_DEFAULT_BOARD_PROFILE="E32V2"'
|
||||
|
||||
; Direct builds
|
||||
|
||||
[env:esp32_4M]
|
||||
extends = espressi32_base_tasmota
|
||||
board = esp32dev
|
||||
|
||||
Reference in New Issue
Block a user