andry/EMS-ESP32
1
0
Fork 0
mirror of https://github.com/emsesp/EMS-ESP32.git synced 2025-12-06 07:49:52 +03:00
Code Issues Packages Projects Releases Wiki Activity

mention about erasing SPIFFs

Browse Source
This commit is contained in:
proddy
2019-02-24 18:27:25 +01:00
parent 523abf5719
commit fc604553ad
1 changed files with 3 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@@ -324,7 +324,9 @@ The ESP8266 will start in Access Point (AP) mode. Connect via WiFi to the SSID *
When flashing for the first time the Serial port is enabled by default with baud 115200. You can then use a PC with USB to the ESP8266 to set the settings like wifi, mqtt etc and also monitor the boot up procedure. Remember to disable the serial (`set serial off`) when connecting to the EMS lines. When flashing for the first time the Serial port is enabled by default with baud 115200. You can then use a PC with USB to the ESP8266 to set the settings like wifi, mqtt etc and also monitor the boot up procedure. Remember to disable the serial (`set serial off`) when connecting to the EMS lines.
The onboard LED will flash if there is no connection with the EMS bus. You can disable LED support by the 'set led' command from the telnet client The onboard LED will flash if there is no connection with the EMS bus. You can disable LED support by the 'set led' command from the telnet client.
If you want to completely erase the ESP and rebuild the firmware then do a `pio run -t erase` which will wipe the onboard flash including the SPIFFs where all the settings are stored.
## Known Issues ## Known Issues